Bump version to 8.3

Yellow: Enable PL011 console on J11 by default (#2001 )
Using Yellow for HA images (landingpage) (#1992 )
2022-07-07 14:53:51 +02:00 · 2022-07-07 14:52:39 +02:00 · 2022-07-07 14:52:25 +02:00 · 2022-07-07 14:52:13 +02:00 · 2022-07-07 14:42:55 +02:00 · 2022-07-07 14:41:09 +02:00
29 changed files with 84 additions and 69 deletions
--- a/.github/workflows/dev.yml
+++ b/.github/workflows/dev.yml
@@ -12,6 +12,9 @@ jobs:
    if: ${{ github.event_name == 'workflow_dispatch' || contains(github.event.pull_request.labels.*.name, 'run-dev-build') }}
    name: Prepare build
    runs-on: [ "ubuntu-20.04" ]
+    permissions:
+      contents: read
+      pull-requests: read
    outputs:
      version_main: ${{ steps.version_main.outputs.version_main }}
      version_dev: ${{ steps.version_dev.outputs.version_dev }}${{ steps.version_pr.outputs.version_pr }}
--- a/.github/workflows/release-drafter.yml
+++ b/.github/workflows/release-drafter.yml
@@ -8,6 +8,9 @@ on:

 jobs:
  update_release_draft:
+    permissions:
+      contents: write  # for release-drafter/release-drafter to create a github release
+      pull-requests: read  # for release-drafter/release-drafter to read PR content and labels
    runs-on: ubuntu-latest
    steps:
      - uses: release-drafter/release-drafter@v5
--- a/.github/workflows/release.yml
+++ b/.github/workflows/release.yml
@@ -44,6 +44,8 @@ jobs:
            return { "board": boards }

  build:
+    permissions:
+      contents: write  # for actions/upload-release-asset to upload release asset
    name: Release build for ${{ matrix.board.id }}
    needs: validate_release
    strategy:
--- a/.github/workflows/stale.yml
+++ b/.github/workflows/stale.yml
@@ -8,6 +8,9 @@ on:

 jobs:
  stale:
+    permissions:
+      issues: write  # for actions/stale to close stale issues
+      pull-requests: write  # for actions/stale to close stale PRs
    runs-on: ubuntu-latest
    steps:
      # The 90 day stale policy
--- a/Documentation/kernel.md
+++ b/Documentation/kernel.md
@@ -5,18 +5,18 @@ Default Kernel tree: 5.15

 | Board | Version |
 |-------|---------|
-| Open Virtual Appliance | 5.15.41 |
+| Open Virtual Appliance | 5.15.52 |
 | Raspberry Pi | 5.15.32 |
 | Raspberry Pi 0-W | 5.15.32 |
 | Raspberry Pi 2 | 5.15.32 |
 | Raspberry Pi 3 | 5.15.32 |
 | Raspberry Pi 4 | 5.15.32 |
 | Home Assistant Yellow | 5.15.32 |
-| Tinker Board | 5.15.41 |
-| Odroid-C2 | 5.15.41 |
-| Odroid-C4 | 5.15.41 |
-| Odroid-N2 | 5.15.41 |
-| Odroid-XU4 | 5.15.41 |
-| Generic aarch64 | 5.15.41 |
-| Generic x86-64 | 5.15.41 |
-| Khadas VIM3 | 5.15.41 |
+| Tinker Board | 5.15.52 |
+| Odroid-C2 | 5.15.52 |
+| Odroid-C4 | 5.15.52 |
+| Odroid-N2 | 5.15.52 |
+| Odroid-XU4 | 5.15.52 |
+| Generic aarch64 | 5.15.52 |
+| Generic x86-64 | 5.15.52 |
+| Khadas VIM3 | 5.15.52 |
--- a/2
+++ b/2
--- a/buildroot-external/board/raspberrypi/patches/uboot/0001-rpi-Use-CONFIG_OF_BOARD-instead-of-CONFIG_EMBED.patch
+++ b/buildroot-external/board/raspberrypi/patches/uboot/0001-rpi-Use-CONFIG_OF_BOARD-instead-of-CONFIG_EMBED.patch
@@ -1,8 +1,8 @@
 From 24b77460dbfa2497ceb7a1611bf28b6eb88a1d74 Mon Sep 17 00:00:00 2001
-Message-Id: <24b77460dbfa2497ceb7a1611bf28b6eb88a1d74.1645627172.git.stefan@agner.ch>
+Message-Id: <24b77460dbfa2497ceb7a1611bf28b6eb88a1d74.1654086219.git.stefan@agner.ch>
 From: Pascal Vizeli <pvizeli@syshack.ch>
 Date: Tue, 10 Dec 2019 09:48:46 +0000
-Subject: [PATCH 1/5] rpi: Use CONFIG_OF_BOARD instead of CONFIG_EMBED
+Subject: [PATCH] rpi: Use CONFIG_OF_BOARD instead of CONFIG_EMBED

 Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch>
 ---
@@ -79,5 +79,5 @@ index 8acf04d0e4..5d5e700224 100644
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 -- 
-2.35.1
+2.36.1

--- a/buildroot-external/board/raspberrypi/patches/uboot/0002-usb-xhci-reset-endpoint-on-USB-stall.patch
+++ b/buildroot-external/board/raspberrypi/patches/uboot/0002-usb-xhci-reset-endpoint-on-USB-stall.patch
@@ -1,10 +1,10 @@
 From c942eb452c1c31fe6259178b6e9fea5456d7fb9c Mon Sep 17 00:00:00 2001
-Message-Id: <c942eb452c1c31fe6259178b6e9fea5456d7fb9c.1645627172.git.stefan@agner.ch>
-In-Reply-To: <24b77460dbfa2497ceb7a1611bf28b6eb88a1d74.1645627172.git.stefan@agner.ch>
-References: <24b77460dbfa2497ceb7a1611bf28b6eb88a1d74.1645627172.git.stefan@agner.ch>
+Message-Id: <c942eb452c1c31fe6259178b6e9fea5456d7fb9c.1654086219.git.stefan@agner.ch>
+In-Reply-To: <24b77460dbfa2497ceb7a1611bf28b6eb88a1d74.1654086219.git.stefan@agner.ch>
+References: <24b77460dbfa2497ceb7a1611bf28b6eb88a1d74.1654086219.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Mon, 27 Sep 2021 12:28:04 +0200
-Subject: [PATCH 2/5] usb: xhci: reset endpoint on USB stall
+Subject: [PATCH] usb: xhci: reset endpoint on USB stall

 There are devices which cause a USB stall when trying to read strings.
 Specifically Arduino Mega R3 stalls when trying to read the product
@@ -83,5 +83,5 @@ index 35bd5cd29e..430823cb9d 100644
 	/* Invalidate buffer to make it available to usb-core */
 	if (length > 0)
 -- 
-2.35.1
+2.36.1

--- a/buildroot-external/board/raspberrypi/patches/uboot/0003-rpi-add-NVMe-to-boot-order.patch
+++ b/buildroot-external/board/raspberrypi/patches/uboot/0003-rpi-add-NVMe-to-boot-order.patch
@@ -1,10 +1,10 @@
 From ae45864457182fcaa67911e1e3d8db242dff3646 Mon Sep 17 00:00:00 2001
-Message-Id: <ae45864457182fcaa67911e1e3d8db242dff3646.1645627172.git.stefan@agner.ch>
-In-Reply-To: <24b77460dbfa2497ceb7a1611bf28b6eb88a1d74.1645627172.git.stefan@agner.ch>
-References: <24b77460dbfa2497ceb7a1611bf28b6eb88a1d74.1645627172.git.stefan@agner.ch>
+Message-Id: <ae45864457182fcaa67911e1e3d8db242dff3646.1654086219.git.stefan@agner.ch>
+In-Reply-To: <24b77460dbfa2497ceb7a1611bf28b6eb88a1d74.1654086219.git.stefan@agner.ch>
+References: <24b77460dbfa2497ceb7a1611bf28b6eb88a1d74.1654086219.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Tue, 29 Dec 2020 23:34:52 +0100
-Subject: [PATCH 3/5] rpi: add NVMe to boot order
+Subject: [PATCH] rpi: add NVMe to boot order

 The Compute Module 4 I/O Board can support a NVMe. Add NVMe to the boot
 order.
@@ -40,5 +40,5 @@ index 4c5c1ac31f..e24c94c7d2 100644
 	BOOT_TARGET_PXE(func) \
 	BOOT_TARGET_DHCP(func)
 -- 
-2.35.1
+2.36.1

--- a/buildroot-external/board/raspberrypi/patches/uboot/0004-Revert-nvme-Correct-the-prps-per-page-calculation-me.patch
+++ b/buildroot-external/board/raspberrypi/patches/uboot/0004-Revert-nvme-Correct-the-prps-per-page-calculation-me.patch
@@ -1,11 +1,10 @@
 From 3a13ff4eb509e8e80a52ae45c9a5573e745803c3 Mon Sep 17 00:00:00 2001
-Message-Id: <3a13ff4eb509e8e80a52ae45c9a5573e745803c3.1645627172.git.stefan@agner.ch>
-In-Reply-To: <24b77460dbfa2497ceb7a1611bf28b6eb88a1d74.1645627172.git.stefan@agner.ch>
-References: <24b77460dbfa2497ceb7a1611bf28b6eb88a1d74.1645627172.git.stefan@agner.ch>
+Message-Id: <3a13ff4eb509e8e80a52ae45c9a5573e745803c3.1654086219.git.stefan@agner.ch>
+In-Reply-To: <24b77460dbfa2497ceb7a1611bf28b6eb88a1d74.1654086219.git.stefan@agner.ch>
+References: <24b77460dbfa2497ceb7a1611bf28b6eb88a1d74.1654086219.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Thu, 23 Sep 2021 23:43:31 +0200
-Subject: [PATCH 4/5] Revert "nvme: Correct the prps per page calculation
- method"
+Subject: [PATCH] Revert "nvme: Correct the prps per page calculation method"

 This reverts commit 859b33c948945f7904f60a2c12a3792d356d51ad.

@@ -40,5 +39,5 @@ index 3c529a2fce..3bda491e12 100644
 
 	length -= (page_size - offset);
 -- 
-2.35.1
+2.36.1

--- a/buildroot-external/board/raspberrypi/patches/uboot/0005-usb-xhci-brcm-Make-driver-compatible-with-downstream.patch
+++ b/buildroot-external/board/raspberrypi/patches/uboot/0005-usb-xhci-brcm-Make-driver-compatible-with-downstream.patch
@@ -1,11 +1,11 @@
 From b00922ee48987ef91f0ca2aa3a66ad22c6c83d57 Mon Sep 17 00:00:00 2001
-Message-Id: <b00922ee48987ef91f0ca2aa3a66ad22c6c83d57.1645627172.git.stefan@agner.ch>
-In-Reply-To: <24b77460dbfa2497ceb7a1611bf28b6eb88a1d74.1645627172.git.stefan@agner.ch>
-References: <24b77460dbfa2497ceb7a1611bf28b6eb88a1d74.1645627172.git.stefan@agner.ch>
+Message-Id: <b00922ee48987ef91f0ca2aa3a66ad22c6c83d57.1654086219.git.stefan@agner.ch>
+In-Reply-To: <24b77460dbfa2497ceb7a1611bf28b6eb88a1d74.1654086219.git.stefan@agner.ch>
+References: <24b77460dbfa2497ceb7a1611bf28b6eb88a1d74.1654086219.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Thu, 7 Oct 2021 12:02:39 +0200
-Subject: [PATCH 5/5] usb: xhci-brcm: Make driver compatible with downstream
- device tree
+Subject: [PATCH] usb: xhci-brcm: Make driver compatible with downstream device
+ tree

 The downstream device tree uses just "generic-xhci" as compatible
 string. Use this string to make U-Boot work with the downstream Kernel.
@@ -29,5 +29,5 @@ index fe17924028..0c6938187b 100644
 };
 
 -- 
-2.35.1
+2.36.1

--- a/buildroot-external/board/raspberrypi/yellow/patches/uboot/0003-nvme-improve-readability-of-nvme_setup_prps.patch
+++ b/buildroot-external/board/raspberrypi/yellow/patches/uboot/0003-nvme-improve-readability-of-nvme_setup_prps.patch
@@ -1,10 +1,10 @@
-From 78924e9cf8c4af0baafcb2e7224bf04ad65276de Mon Sep 17 00:00:00 2001
-Message-Id: <78924e9cf8c4af0baafcb2e7224bf04ad65276de.1650924333.git.stefan@agner.ch>
-In-Reply-To: <78704bc154d695ee16fdf8396f4d60b740190014.1650924333.git.stefan@agner.ch>
-References: <78704bc154d695ee16fdf8396f4d60b740190014.1650924333.git.stefan@agner.ch>
+From 4ef63d77803aeb322fe72eb5445897eba52c68ff Mon Sep 17 00:00:00 2001
+Message-Id: <4ef63d77803aeb322fe72eb5445897eba52c68ff.1654086219.git.stefan@agner.ch>
+In-Reply-To: <24b77460dbfa2497ceb7a1611bf28b6eb88a1d74.1654086219.git.stefan@agner.ch>
+References: <24b77460dbfa2497ceb7a1611bf28b6eb88a1d74.1654086219.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Thu, 23 Sep 2021 23:52:44 +0200
-Subject: [PATCH 3/5] nvme: improve readability of nvme_setup_prps()
+Subject: [PATCH] nvme: improve readability of nvme_setup_prps()

 Improve readability by introducing consts, reuse consts where
 appropriate and adding variables with discriptive name.
@@ -47,5 +47,5 @@ index 3bda491e12..1601651449 100644
 			prp_pool += page_size;
 		}
 -- 
-2.36.0
+2.36.1

--- a/buildroot-external/board/raspberrypi/yellow/patches/uboot/0004-nvme-Use-pointer-for-CPU-addressed-buffers.patch
+++ b/buildroot-external/board/raspberrypi/yellow/patches/uboot/0004-nvme-Use-pointer-for-CPU-addressed-buffers.patch
@@ -1,10 +1,10 @@
-From e040d976ecbdd8071bbcb73d78e17ababa88c51f Mon Sep 17 00:00:00 2001
-Message-Id: <e040d976ecbdd8071bbcb73d78e17ababa88c51f.1650924333.git.stefan@agner.ch>
-In-Reply-To: <78704bc154d695ee16fdf8396f4d60b740190014.1650924333.git.stefan@agner.ch>
-References: <78704bc154d695ee16fdf8396f4d60b740190014.1650924333.git.stefan@agner.ch>
+From b3441191724335b5a41d73875584ea293f85a56b Mon Sep 17 00:00:00 2001
+Message-Id: <b3441191724335b5a41d73875584ea293f85a56b.1654086219.git.stefan@agner.ch>
+In-Reply-To: <24b77460dbfa2497ceb7a1611bf28b6eb88a1d74.1654086219.git.stefan@agner.ch>
+References: <24b77460dbfa2497ceb7a1611bf28b6eb88a1d74.1654086219.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Thu, 23 Sep 2021 23:58:35 +0200
-Subject: [PATCH 4/5] nvme: Use pointer for CPU addressed buffers
+Subject: [PATCH] nvme: Use pointer for CPU addressed buffers

 Pass buffers which use CPU addressing as void pointers. This aligns with
 DMA APIs which use void pointers as argument. It will avoid unnecessary
@@ -259,5 +259,5 @@ index 2cdf8ce320..8ff823cd81 100644
 /**
  * nvme_scan_namespace - scan all namespaces attached to NVMe controllers
 -- 
-2.36.0
+2.36.1

--- a/buildroot-external/board/raspberrypi/yellow/patches/uboot/0005-nvme-translate-virtual-addresses-into-the-bus-s-addr.patch
+++ b/buildroot-external/board/raspberrypi/yellow/patches/uboot/0005-nvme-translate-virtual-addresses-into-the-bus-s-addr.patch
@@ -1,10 +1,10 @@
-From c4736c35141e519d15430660e17c274e142e886d Mon Sep 17 00:00:00 2001
-Message-Id: <c4736c35141e519d15430660e17c274e142e886d.1650924333.git.stefan@agner.ch>
-In-Reply-To: <78704bc154d695ee16fdf8396f4d60b740190014.1650924333.git.stefan@agner.ch>
-References: <78704bc154d695ee16fdf8396f4d60b740190014.1650924333.git.stefan@agner.ch>
+From 54d797d83265e31e16db922eb7c12d4bbc749127 Mon Sep 17 00:00:00 2001
+Message-Id: <54d797d83265e31e16db922eb7c12d4bbc749127.1654086219.git.stefan@agner.ch>
+In-Reply-To: <24b77460dbfa2497ceb7a1611bf28b6eb88a1d74.1654086219.git.stefan@agner.ch>
+References: <24b77460dbfa2497ceb7a1611bf28b6eb88a1d74.1654086219.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Fri, 24 Sep 2021 00:27:39 +0200
-Subject: [PATCH 5/5] nvme: translate virtual addresses into the bus's address
+Subject: [PATCH] nvme: translate virtual addresses into the bus's address
 space

 So far we've been content with passing physical/CPU addresses when
@@ -194,5 +194,5 @@ index c6aae4da5d..31e6899bca 100644
 +
 #endif /* __DRIVER_NVME_H__ */
 -- 
-2.36.0
+2.36.1

--- a/buildroot-external/board/raspberrypi/yellow/cmdline.txt
+++ b/buildroot-external/board/raspberrypi/yellow/cmdline.txt
@@ -1 +1 @@
-dwc_otg.lpm_enable=0 console=tty1 console=serial0,115200n8 console=ttyAMA2,115200n8
+dwc_otg.lpm_enable=0 console=tty1 console=ttyAMA2,115200n8
--- a/buildroot-external/board/raspberrypi/yellow/config.txt
+++ b/buildroot-external/board/raspberrypi/yellow/config.txt
@@ -7,9 +7,12 @@ disable_splash=1
 kernel=u-boot.bin
 arm_64bit=1

-# uncomment to enable primary UART console
+# Enable primary UART by default
 enable_uart=1

+# Free up full-fledged PL011 UART for J11
+dtoverlay=miniuart-bt
+
 # No HDMI on Yellow, but we can't set to 16 since we need the full firmware
 # for codecs
 gpu_mem=32
@@ -23,9 +26,7 @@ gpu_mem=32
 #dtoverlay=lirc-rpi

 # Uncomment this to enable GPIO support for RPI-RF-MOD/HM-MOD-RPI-PCB
-#enable_uart=1
 #dtparam=i2c_arm=on
-#dtoverlay=miniuart-bt
 #dtoverlay=rpi-rf-mod

 # Additional overlays and parameters are documented /boot/overlays/README
--- a/buildroot-external/board/raspberrypi/yellow/meta
+++ b/buildroot-external/board/raspberrypi/yellow/meta
@@ -6,5 +6,5 @@ KERNEL_FILE=Image
 BOOT_SYS=hybrid
 BOOT_SPL=false
 BOOT_ENV_SIZE=0x4000
-SUPERVISOR_MACHINE=raspberrypi4-64
+SUPERVISOR_MACHINE=yellow
 SUPERVISOR_ARCH=aarch64
--- a/buildroot-external/configs/generic_aarch64_defconfig
+++ b/buildroot-external/configs/generic_aarch64_defconfig
@@ -20,7 +20,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/arm-uefi/generic-aarch64 $(BR2_EXTERNAL_HASSOS_PATH)/board/arm-uefi/generic-aarch64/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.41"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.52"
 BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/arm-uefi/generic-aarch64/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
--- a/buildroot-external/configs/generic_x86_64_defconfig
+++ b/buildroot-external/configs/generic_x86_64_defconfig
@@ -20,7 +20,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/pc/generic-x86-64 $(BR2_EXTERNAL_HASSOS_PATH)/board/pc/generic-x86-64/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.41"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.52"
 BR2_LINUX_KERNEL_DEFCONFIG="x86_64"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/pc/generic-x86-64/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
--- a/buildroot-external/configs/khadas_vim3_defconfig
+++ b/buildroot-external/configs/khadas_vim3_defconfig
@@ -20,7 +20,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/khadas/vim3 $(BR2_EXTERNAL_HASSOS_PATH)/board/khadas/vim3/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.41"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.52"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(BR2_EXTERNAL_HASSOS_PATH)/board/khadas/kernel-vim.config"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config"
--- a/buildroot-external/configs/odroid_c2_defconfig
+++ b/buildroot-external/configs/odroid_c2_defconfig
@@ -20,7 +20,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-c2 $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-c2/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.41"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.52"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/kernel-amlogic.config"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config"
--- a/buildroot-external/configs/odroid_c4_defconfig
+++ b/buildroot-external/configs/odroid_c4_defconfig
@@ -20,7 +20,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-c4 $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-c4/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.41"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.52"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/kernel-amlogic.config"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config"
--- a/buildroot-external/configs/odroid_n2_defconfig
+++ b/buildroot-external/configs/odroid_n2_defconfig
@@ -20,7 +20,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-n2 $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-n2/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.41"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.52"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/kernel-amlogic.config"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-n2/kernel.config"
--- a/buildroot-external/configs/odroid_xu4_defconfig
+++ b/buildroot-external/configs/odroid_xu4_defconfig
@@ -21,7 +21,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-xu4 $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-xu4/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.41"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.52"
 BR2_LINUX_KERNEL_DEFCONFIG="exynos"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config"
 BR2_LINUX_KERNEL_LZ4=y
--- a/buildroot-external/configs/ova_defconfig
+++ b/buildroot-external/configs/ova_defconfig
@@ -20,7 +20,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/pc/ova $(BR2_EXTERNAL_HASSOS_PATH)/board/pc/ova/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.41"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.52"
 BR2_LINUX_KERNEL_DEFCONFIG="x86_64"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/pc/ova/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
--- a/buildroot-external/configs/tinker_defconfig
+++ b/buildroot-external/configs/tinker_defconfig
@@ -22,7 +22,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/asus/tinker $(BR2_EXTERNAL_HASSOS_PATH)/board/asus/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.41"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.52"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(BR2_EXTERNAL_HASSOS_PATH)/board/asus/tinker/kernel.config"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config"
--- a/buildroot-external/meta
+++ b/buildroot-external/meta
@@ -1,5 +1,5 @@
 VERSION_MAJOR=8
-VERSION_BUILD=1
+VERSION_BUILD=3

 HASSOS_NAME="Home Assistant OS"
 HASSOS_ID="haos"
--- a/buildroot-external/rootfs-overlay/etc/NetworkManager/NetworkManager.conf
+++ b/buildroot-external/rootfs-overlay/etc/NetworkManager/NetworkManager.conf
@@ -15,7 +15,7 @@ connection.mdns=2
 connection.llmnr=2

 [connectivity]
-uri=http://version.home-assistant.io/online.txt
+uri=http://checkonline.home-assistant.io/online.txt

 [device]
 wifi.scan-rand-mac-address=no
--- a/buildroot-external/rootfs-overlay/etc/sysctl.d/20-network.conf
+++ b/buildroot-external/rootfs-overlay/etc/sysctl.d/20-network.conf
@@ -1,3 +1,7 @@
 # Since multicast is rather popular and we have many integrations running,
 # more than the default of 20 memberships might be required.
 net.ipv4.igmp_max_memberships = 1024
+
+# Increase maximum receive and send buffer size
+net.core.rmem_max = 4194304
+net.core.wmem_max = 4194304
Author	SHA1	Message	Date
Stefan Agner	2285b7ca04	Bump version to 8.3	2022-07-07 14:53:51 +02:00
Stefan Agner	2a7a917203	Yellow: Enable PL011 console on J11 by default (#2001 )	2022-07-07 14:52:39 +02:00
Pascal Vizeli	cbbd65081e	Using Yellow for HA images (landingpage) (#1992 )	2022-07-07 14:52:25 +02:00
Joakim Sørensen	163ba55028	Use checkonline instead of version for connectivity check (#1991 )	2022-07-07 14:52:13 +02:00
Stefan Agner	1675b65b45	Linux: Update kernel 5.15.52 (#2002 )	2022-07-07 14:42:55 +02:00
Stefan Agner	f906b1ef55	Bump buildroot (#1986 ) * buildroot 7995541510...e7a881ea75 (1): > Merge tag '2022.02.3' into 2022.02.x-haos	2022-07-07 14:41:09 +02:00
Stefan Agner	fb5851099e	Set restrictive GitHub Action permissions (#1985 ) * chore: Set permissions for GitHub actions Restrict the GitHub token permissions only to the required ones; this way, even if the attackers will succeed in compromising your workflow, they won’t be able to do much. * Remove global permissions which are set implicitly With restrictive settings in the global GitHub Action permission settings those permissions are given implicitly. Co-authored-by: neilnaveen <42328488+neilnaveen@users.noreply.github.com> Co-authored-by: Joakim Sørensen <hi@ludeeus.dev> Co-authored-by: Stefan Agner <stefan@agner.ch>	2022-07-07 14:40:55 +02:00
Stefan Agner	da4ba283bb	Bump version to 8.2	2022-06-08 22:34:41 +02:00
Stefan Agner	909b66eed3	Increase maximum socket receive and send buffer size (#1964 ) (#1968 ) Some applications try to increase the buffers for performance reason. The QUIC Go implementation for instance tries to request a 2048 kiB buffer size. The kernel default depends on skubuf size (which is architecture dependent), but it is memory size independet and typically around 200 kiB (see [1]). Other network tuning guides suggest 16MiB for 1GB ethernet, as well as changing the default as well as maximum bufffer size (see [2]). This conservatively increases the maximum buffer size to 4MiB. [1]: https://elixir.bootlin.com/linux/v5.15.45/source/include/net/sock.h#L2742 [2]: https://nateware.com/2013/04/06/linux-network-tuning-for-2013/	2022-06-08 22:34:17 +02:00
Stefan Agner	091b4e3a9a	Linux: Update kernel 5.15.45 (#1967 )	2022-06-08 22:34:11 +02:00
Stefan Agner	72b3c46bfc	Bump buildroot (#1958 ) * buildroot 2eebdbad5c...7995541510 (1): > Merge tag '2022.02.2' into 2022.02.x-haos	2022-06-08 22:34:01 +02:00
Stefan Agner	306c07b1b1	NVMe patches are applied for all Raspberry Pi based boards now (#1959 )	2022-06-08 22:33:48 +02:00
Stefan Agner	ad2f3a3570	Apply NVMe fixes to all Raspberry Pi boards (#1911 ) (#1957 )	2022-06-08 22:33:40 +02:00
Stefan Agner	083d894c50	Linux: Update kernel 5.15.44 (#1951 )	2022-06-08 22:33:16 +02:00