Bump version to 7.2

To make HDMI CEC work, we have to compile MESON_DRM as a module
(see #1717). However, this essentially reverts #1347, which fixed the
reboot problem by compiling the driver into the kernel.

Hence we need to reintroduce the earlier fix from #1345, which reverts
the offending commit causing the reboot problem.

.github/ISSUE_TEMPLATE/bug_report.yml

@@ -38,7 +38,7 @@ body:
         - rpi4-64  (Raspberry Pi 4/400 64-bit OS)
         - tinker (ASUS Tinker Board/Tinker Board S)
       description: >
-        Can be found in the [Configuration panel -> Settings -> Info](https://my.home-assistant.io/redirect/info/). It is listed as the `Board` value.
+        Can be found in the [Configuration panel -> Info](https://my.home-assistant.io/redirect/info/). It is listed as the `Board` value.
 
         [![Open your Home Assistant instance and show your Home Assistant version information.](https://my.home-assistant.io/badges/info.svg)](https://my.home-assistant.io/redirect/info/)
   - type: input
@@ -48,7 +48,7 @@ body:
       label: What version of Home Assistant Operating System is installed?
       placeholder: "6.6"
       description: >
-        Can be found in the [Configuration panel -> Settings -> Info](https://my.home-assistant.io/redirect/info/). It is listed as the `Host Operating System` value.
+        Can be found in the [Configuration panel -> Info](https://my.home-assistant.io/redirect/info/). It is listed as the `Host Operating System` value.
   - type: dropdown
     validations:
       required: true
@@ -76,7 +76,7 @@ body:
     attributes:
       label: Anything in the Supervisor logs that might be useful for us?
       description: >
-        Supervisor Logs can be found under [Configuration panel -> Add-ons, Backup & Supervisor -> System](https://my.home-assistant.io/redirect/supervisor_logs/), then choose Log Provider `Supervisor`.
+        Supervisor Logs can be found under [Supervisor -> System](https://my.home-assistant.io/redirect/supervisor_logs/), then choose Log Provider `Supervisor`.
 
         [![Open your Home Assistant instance and show your Supervisor system logs.](https://my.home-assistant.io/badges/supervisor_logs.svg)](https://my.home-assistant.io/redirect/supervisor_logs/)
       render: txt
@@ -86,7 +86,7 @@ body:
     attributes:
       label: Anything in the Host logs that might be useful for us?
       description: >
-        Supervisor Logs can be found under [Configuration panel -> Add-ons, Backup & Supervisor -> System](https://my.home-assistant.io/redirect/supervisor_logs/), then choose Log Provider `Host`.
+        Supervisor Logs can be found under [Supervisor -> System](https://my.home-assistant.io/redirect/supervisor_logs/), then choose Log Provider `Host`.
       render: txt
   - type: textarea
     attributes:
@@ -94,7 +94,7 @@ body:
       description: >
         **Optional** Copy the full System Health in this text area.
 
-        Can be found in the [Configuration panel -> Settings -> Info](https://my.home-assistant.io/redirect/info/).
+        Can be found in the [Configuration panel -> Info](https://my.home-assistant.io/redirect/info/).
         Use the copy icon on top right and choose `For GitHub`.
   - type: textarea
     attributes:

.github/release-drafter.yml

@@ -1,5 +1,3 @@
-name-template: Home Assistant OS $NEXT_MINOR_VERSION
-version-template: "$MAJOR.$MINOR"
 categories:
   - title: 'Home Assistant Operating System'
     label: 'os'
@@ -7,8 +5,6 @@ categories:
     label: 'build'
   - title: 'Raspberry Pi'
     label: 'board/raspberrypi'
-  - title: 'Home Assistant Yellow'
-    label: 'board/yellow'
   - title: 'Open Virtual Appliance'
     label: 'board/ova'
   - title: 'Generic x86-64'
@@ -19,9 +15,8 @@ categories:
     label: 'board/tinker'
   - title: 'Khadas VIM Series'
     label: 'board/khadas'
-  - title: 'Generic aarch64'
-    label: 'board/generic-aarch64'
 filter-by-commitish: true
+commitish: dev
 template: |
   ## Changes
 

.github/workflows/dev.yml

@@ -77,6 +77,10 @@ jobs:
               return { "ref": context.ref }
             return { "ref": context.payload.pull_request.head.sha }
 
+      # Make sure directories of potentially removed submodules are cleaned correctly
+      - name: Cleanup git submodules
+        run: find . -name .git -type f -exec rm {} \;
+
       - name: Checkout source
         uses: actions/checkout@v2
         with:
@@ -102,14 +106,13 @@ jobs:
           docker run --rm --privileged -v "${GITHUB_WORKSPACE}:/build" \
             -e BUILDER_UID="${BUILDER_UID}" -e BUILDER_GID="${BUILDER_GID}" \
             -v "${{ matrix.board.runner }}-build-cache:/cache" \
-            -v "/build/output" \
             haos-builder make BUILDDIR=/build VERSION_DEV=${{ needs.prepare.outputs.version_dev }} ${{ matrix.board.defconfig }}
 
       - name: Upload images
         uses: burnett01/rsync-deployments@4.1
         with:
           rsh: -q
-          switches: -aW
+          switches: -aW --ignore-existing
           path: release/
           remote_path: ${{ secrets.DEV_TARGET_PATH }}/${{ needs.prepare.outputs.version_main }}.${{ needs.prepare.outputs.version_dev }}/
           remote_host: ${{ secrets.DEV_HOST }}

.github/workflows/matrix.json

@@ -11,12 +11,6 @@
     "runner": "x86-64-runner",
     "label": "board/generic-x86-64"
   },
-  {
-    "id": "generic-aarch64",
-    "defconfig": "generic_aarch64",
-    "runner": "aarch64-runner",
-    "label": "board/generic-aarch64"
-  },
   {
     "id": "khadas-vim3",
     "defconfig": "khadas_vim3",
@@ -77,12 +71,6 @@
     "runner": "aarch64-runner",
     "label": "board/raspberrypi"
   },
-  {
-    "id": "yellow",
-    "defconfig": "yellow",
-    "runner": "aarch64-runner",
-    "label": "board/yellow"
-  },
   {
     "id": "tinker",
     "defconfig": "tinker",

.github/workflows/release-drafter.yml

@@ -4,7 +4,7 @@ on:
   push:
     branches:
       - dev
-      - rel-*
+      - rel-4
 
 jobs:
   update_release_draft:

.github/workflows/release.yml

@@ -13,7 +13,6 @@ jobs:
     outputs:
       version: ${{ steps.version_check.outputs.version }}
       version_dev: ${{ steps.version_check.outputs.version_dev }}
-      matrix: ${{ steps.generate_matrix.outputs.result }}
     steps:
       - uses: actions/checkout@v2
       - name: Validate version
@@ -35,22 +34,33 @@ jobs:
             echo "::set-output name=version::${major}.${build}"
           fi
           echo "::set-output name=version_dev::${tag_dev}"
-      - name: Create build matrix
-        uses: actions/github-script@v4
-        id: generate_matrix
-        with:
-          script: |
-            const boards = require('./.github/workflows/matrix.json')
-            return { "board": boards }
 
   build:
-    name: Release build for ${{ matrix.board.id }}
+    name: Release build for ${{ matrix.board.name }}
     needs: validate_release
     strategy:
-      matrix: ${{ fromJson(needs.validate_release.outputs.matrix) }}
+      matrix:
+        board:
+          - {"name": "ova", "output": "ova", "runner": "x86-64-runner"}
+          - {"name": "generic_x86_64", "output": "generic-x86-64", "runner": "x86-64-runner"}
+          - {"name": "khadas_vim3", "output": "khadas-vim3", "runner": "aarch64-runner"}
+          - {"name": "odroid_c2", "output": "odroid-c2", "runner": "aarch64-runner"}
+          - {"name": "odroid_c4", "output": "odroid-c4", "runner": "aarch64-runner"}
+          - {"name": "odroid_n2", "output": "odroid-n2", "runner": "aarch64-runner"}
+          - {"name": "odroid_xu4", "output": "odroid-xu4" , "runner": "aarch64-runner"}
+          - {"name": "rpi2", "output": "rpi2", "runner": "arm-runner"}
+          - {"name": "rpi3", "output": "rpi3", "runner": "arm-runner"}
+          - {"name": "rpi3_64", "output": "rpi3-64", "runner": "aarch64-runner"}
+          - {"name": "rpi4", "output": "rpi4", "runner": "arm-runner"}
+          - {"name": "rpi4_64", "output": "rpi4-64", "runner": "aarch64-runner"}
+          - {"name": "tinker", "output": "tinker", "runner": "arm-runner"}
     runs-on: ${{ matrix.board.runner }}
 
     steps:
+      # Make sure directories of potentially removed submodules are cleaned correctly
+      - name: Cleanup git submodules
+        run: find . -name .git -type f -exec rm {} \;
+
       # Checks-out your repository under $GITHUB_WORKSPACE, so your job can access it
       - uses: actions/checkout@v2
         with:
@@ -74,18 +84,17 @@ jobs:
           docker run --rm --privileged -v "${GITHUB_WORKSPACE}:/build" \
             -e BUILDER_UID="${BUILDER_UID}" -e BUILDER_GID="${BUILDER_GID}" \
             -v "${{ matrix.board.runner }}-build-cache:/cache" \
-            -v "/build/output" \
-            haos-builder make BUILDDIR=/build VERSION_DEV=${{ needs.validate_release.outputs.version_dev }} ${{ matrix.board.defconfig }}
+            haos-builder make BUILDDIR=/build VERSION_DEV=${{ needs.validate_release.outputs.version_dev }} ${{ matrix.board.name }}
 
       - name: Upload disk image
-        if: ${{ matrix.board.id != 'ova' }}
+        if: ${{ matrix.board.name != 'ova' }}
         uses: actions/upload-release-asset@v1
         env:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
         with:
           upload_url: ${{ github.event.release.upload_url }}
-          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.id }}-${{ needs.validate_release.outputs.version }}.img.xz
-          asset_name: haos_${{ matrix.board.id }}-${{ needs.validate_release.outputs.version }}.img.xz
+          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.img.xz
+          asset_name: haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.img.xz
           asset_content_type: application/x-xz
 
       - name: Upload rauc update
@@ -94,63 +103,63 @@ jobs:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
         with:
           upload_url: ${{ github.event.release.upload_url }}
-          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.id }}-${{ needs.validate_release.outputs.version }}.raucb
-          asset_name: haos_${{ matrix.board.id }}-${{ needs.validate_release.outputs.version }}.raucb
+          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.raucb
+          asset_name: haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.raucb
           asset_content_type: application/octet-stream
 
       - name: Upload ova image
-        if: ${{ matrix.board.id == 'ova' }}
+        if: ${{ matrix.board.name == 'ova' }}
         uses: actions/upload-release-asset@v1
         env:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
         with:
           upload_url: ${{ github.event.release.upload_url }}
-          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.id }}-${{ needs.validate_release.outputs.version }}.ova
-          asset_name: haos_${{ matrix.board.id }}-${{ needs.validate_release.outputs.version }}.ova
+          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.ova
+          asset_name: haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.ova
           asset_content_type: application/x-tar
 
       - name: Upload qcow2 image
-        if: ${{ matrix.board.id == 'ova' || matrix.board.id == 'generic-aarch64' }}
+        if: ${{ matrix.board.name == 'ova' }}
         uses: actions/upload-release-asset@v1
         env:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
         with:
           upload_url: ${{ github.event.release.upload_url }}
-          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.id }}-${{ needs.validate_release.outputs.version }}.qcow2.xz
-          asset_name: haos_${{ matrix.board.id }}-${{ needs.validate_release.outputs.version }}.qcow2.xz
+          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.qcow2.xz
+          asset_name: haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.qcow2.xz
           asset_content_type: application/x-xz
 
       - name: Upload vdi image
-        if: ${{ matrix.board.id == 'ova' }}
+        if: ${{ matrix.board.name == 'ova' }}
         uses: actions/upload-release-asset@v1
         env:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
         with:
           upload_url: ${{ github.event.release.upload_url }}
-          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.id }}-${{ needs.validate_release.outputs.version }}.vdi.zip
-          asset_name: haos_${{ matrix.board.id }}-${{ needs.validate_release.outputs.version }}.vdi.zip
+          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.vdi.zip
+          asset_name: haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.vdi.zip
           asset_content_type: application/zip
 
       - name: Upload vhdx image
-        if: ${{ matrix.board.id == 'ova' }}
+        if: ${{ matrix.board.name == 'ova' }}
         uses: actions/upload-release-asset@v1
         env:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
         with:
           upload_url: ${{ github.event.release.upload_url }}
-          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.id }}-${{ needs.validate_release.outputs.version }}.vhdx.zip
-          asset_name: haos_${{ matrix.board.id }}-${{ needs.validate_release.outputs.version }}.vhdx.zip
+          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.vhdx.zip
+          asset_name: haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.vhdx.zip
           asset_content_type: application/zip
 
       - name: Upload vmdk image
-        if: ${{ matrix.board.id == 'ova' || matrix.board.id == 'generic-aarch64' }}
+        if: ${{ matrix.board.name == 'ova' }}
         uses: actions/upload-release-asset@v1
         env:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
         with:
           upload_url: ${{ github.event.release.upload_url }}
-          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.id }}-${{ needs.validate_release.outputs.version }}.vmdk.zip
-          asset_name: haos_${{ matrix.board.id }}-${{ needs.validate_release.outputs.version }}.vmdk.zip
+          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.vmdk.zip
+          asset_name: haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.vmdk.zip
           asset_content_type: application/zip
 
   bump_version:

Documentation/boards/README.md

@@ -5,27 +5,26 @@
 The following boards/devices are supported:
 
 - Raspberry Pi
-  - Pi 4 Model B (1 GB, 2 GB, 4 GB and 8 GB model) 64-bit (recommended)
-  - Pi 4 Model B (1 GB, 2 GB, 4 GB and 8 GB model) 32-bit
-  - Pi 3 Model B and B+ 64-bit (recommended)
+  - Pi 4 Model B (1 GB, 2 GB and 4 GB model) 32-bit
+  - Pi 4 Model B (1 GB, 2 GB and 4 GB model) 64-bit (recommended)
   - Pi 3 Model B and B+ 32-bit
+  - Pi 3 Model B and B+ 64-bit (recommended)
   - Pi 2 (not recommended)
   - Pi Zero-W (not recommended)
   - Pi (not recommended)
 - Hardkernel
-  - Odroid-N2
-  - Odroid-N2+
   - Odroid-C2
-  - Odroid-C4
+  - Odroid-C4 (_experimental_)
+  - Odroid-N2
   - Odroid-XU4
-- Asus
-  - Tinker Board
 - Generic x86-64 (UEFI, not suited for virtualization)
   - Intel NUC5CPYH
   - Intel NUC6CAYH
   - Intel NUC10I3FNK2
   - Gigabyte GB-BPCE-3455
   - Computers supporting x86-64 architecture and UEFI boot should generally work
+- Asus
+  - Tinker Board
 - Virtual appliance (x86_64/UEFI):
   - VMDK
   - OVA ?
@@ -40,15 +39,17 @@ Notes:
 
 |Board|Build|Config|Docs|
 |-----|----|------|----|
-|Pi4B 64-bit   |`make rpi4_64`       |[rpi4_64](../../buildroot-external/configs/rpi4_64_defconfig)|[raspberrypi](./raspberrypi/)|
-|Pi4B 32-bit   |`make rpi4`          |[rpi4](../../buildroot-external/configs/rpi4_defconfig)|[raspberrypi](./raspberrypi/)|
-|Pi3B 64-bit   |`make rpi3_64`       |[rpi3_64](../../buildroot-external/configs/rpi3_64_defconfig)|[raspberrypi](./raspberrypi/)|
-|Pi3B 32-bit   |`make rpi3`          |[rpi3](../../buildroot-external/configs/rpi3_defconfig)|[raspberrypi](./raspberrypi/)|
-|Pi2           |`make rpi2`          |[rpi2](../../buildroot-external/configs/rpi2_defconfig)|[raspberrypi](./raspberrypi/)|
-|Odroid-N2/N2+ |`make odroid_n2`     |[odroid_n2](../../buildroot-external/configs/odroid_n2_defconfig)|[hardkernel](./hardkernel/)|
-|Odroid-C2     |`make odroid_c2`     |[odroid_c2](../../buildroot-external/configs/odroid_c2_defconfig)|[hardkernel](./hardkernel/)|
-|Odroid-C4     |`make odroid_c4`     |[odroid_c4](../../buildroot-external/configs/odroid_c4_defconfig)|[hardkernel](./hardkernel/)|
-|Odroid-XU4    |`make odroid_xu4`    |[odroid_xu4](../../buildroot-external/configs/odroid_xu4_defconfig)|[hardkernel](./hardkernel/)|
-|Tinker Board  |`make tinker`        |[tinker](../../buildroot-external/configs/tinker_defconfig)|[asus](./asus/)|
-|Generic x86-64|`make generic_x86_64`|[generic_x86_64](../../buildroot-external/configs/generic_x86_64_defconfig)|[generic-x86-64](./generic-x86-64/)|
-|OVA           |`make ova`           |[ova](../../buildroot-external/configs/ova_defconfig)|[ova](./ova/)|
+|Pi4B 32-bit    |`make rpi4`           |[rpi4](../../buildroot-external/configs/rpi4_defconfig)|[raspberrypi](./raspberrypi/)|
+|Pi4B 64-bit    |`make rpi4_64`        |[rpi4_64](../../buildroot-external/configs/rpi4_64_defconfig)|[raspberrypi](./raspberrypi/)|
+|Pi3B 32-bit    |`make rpi3`           |[rpi3](../../buildroot-external/configs/rpi3_defconfig)|[raspberrypi](./raspberrypi/)|
+|Pi3B 64-bit    |`make rpi3_64`        |[rpi3_64](../../buildroot-external/configs/rpi3_64_defconfig)|[raspberrypi](./raspberrypi/)|
+|Pi2            |`make rpi2`           |[rpi2](../../buildroot-external/configs/rpi2_defconfig)|[raspberrypi](./raspberrypi/)|
+|Pi Zero        |`make rpi0_w`         |[rpi0_w](../../buildroot-external/configs/rpi0_w_defconfig)|[raspberrypi](./raspberrypi/)|
+|Pi             |`make rpi`            |[rpi](../../buildroot-external/configs/rpi_defconfig)|[raspberrypi](./raspberrypi/)|
+|Odroid-C2      |`make odroid_c2`      |[odroid_c2](../../buildroot-external/configs/odroid_c2_defconfig)|[hardkernel](./hardkernel/)|
+|Odroid-C4      |`make odroid_c4`      |[odroid_c4](../../buildroot-external/configs/odroid_c4_defconfig)|[hardkernel](./hardkernel/)|
+|Odroid-N2      |`make odroid_n2`      |[odroid_n2](../../buildroot-external/configs/odroid_n2_defconfig)|[hardkernel](./hardkernel/)|
+|Odroid-XU4     |`make odroid_xu4`     |[odroid_xu4](../../buildroot-external/configs/odroid_xu4_defconfig)|[hardkernel](./hardkernel/)|
+|Tinker Board   |`make tinker`         |[tinker](../../buildroot-external/configs/tinker_defconfig)|[asus](./asus/)|
+|Generic x86-64 |`make generic_x86_64` |[generic_x86_64](../../buildroot-external/configs/generic_x86_64_defconfig)|[generic-x86-64](./generic-x86-64/)|
+|OVA            |`make ova`            |[ova](../../buildroot-external/configs/ova_defconfig)|[ova](./ova/)|

Documentation/boards/generic-aarch64/README.md

@@ -1,36 +0,0 @@
-# Generic aarch64
-
-## Supported Hardware
-
-This board configuration aims to support most aarch64 systems with UEFI boot
-Hardware it has been tested with is listed below.
-
-## Tested Hardware
-
-| Device                | Release Date | Support | Config      |
-|-----------------------|--------------|---------|-------------|
-| QEMU                  | QEMU         | yes     | [generic_aarch64](../../../buildroot-external/configs/generic_aarch64_defconfig) |
-
-
-## Requirements
-
-- aarch64 support
-- UEFI boot
-
-## Wifi
-
-WiFi is untested.
-
-## Bluetooth
-
-Bluetooth is untested.
-
-## Installation
-
-Make sure secure boot is disabled in the UEFI BIOS settings.
-
-Currently there is no shiny installation method. Checklist:
-- Boot PC to live environment using PXE or USB
-- Copy or download the Home Assistant OS image into your live environment
-- unxz the image and dd to the local hard disk
-- Reboot

Documentation/boards/raspberrypi/README.md

@@ -6,8 +6,16 @@
 |---------------------|---------------|-----------------|--------------------|
 | Raspberry Pi B/B+/A+|2012/2014/2014 | not recommended | [rpi](../../../buildroot-external/configs/rpi_defconfig)              |
 | Raspberry Pi 2 B    |2015           | not recommended | [rpi2](../../../buildroot-external/configs/rpi2_defconfig)             |
+| Raspberry Pi Zero   |2015           | not recommended | [rpi](../../../buildroot-external/configs/rpi_defconfig)              |
+| Raspberry Pi Zero W |2017           | not recommended | [rpi0_w](../../../buildroot-external/configs/rpi0_w_defconfig)           |
 | Raspberry Pi 3 B/B+ |2016/2018      | yes             | [rpi3](../../../buildroot-external/configs/rpi3_defconfig) / [rpi3_64](../../../buildroot-external/configs/rpi3_64_defconfig) |
-| Raspberry Pi 4 B    |2019           | yes             | [rpi4](../../../buildroot-external/configs/rpi4_defconfig) / [rpi4_64](../../../buildroot-external/configs/rpi4_64_defconfig) |
+| Raspberry Pi 4 B    |2019           | yes*            | [rpi4](../../../buildroot-external/configs/rpi4_defconfig) / [rpi4_64](../../../buildroot-external/configs/rpi4_64_defconfig) |
+
+\*1,2 and 4 GiB versions of the Raspberry Pi 4 B are supported. Support for the 8 GiB version is coming soon is part of #740.
+
+## Limitation 64bit
+
+The 64bit version is under development by RPi-Team. It work very nice but it could have some impacts. Actual we see that the SDcard access with ext4 are a bit slower than on 32bit.
 
 ## Serial console
 

Documentation/configuration.md

@@ -23,8 +23,6 @@ hassos-xy.raucb
 - The `timesyncd.conf` file allow you to set different NTP servers. HassOS won't boot without correct working time servers!
 - The `hassos-*.raucb` file is a firmware OTA update which will be installed. These can be found on on the [release][hassos-release] page.
 
-Text files that are on USB stick must have Unix (LF) end of line characters. If you create USB stick on Windows machine, be sure to use Notepad++, Visual Studio Code or any other editor, that supports different line endings. In Notepad++ LF EOL can be enabled with setting `Edit -> EOL Conversion -> Unix (LF)`.
-
 You can put this USB stick into the device and it will be read on startup and files written to the correct places. You can also trigger this process later over the
 API/UI or by calling `systemctl restart hassos-config` on the host. *The USB Stick just needs to be inserted to the device during this setup process and can be disconnected afterwards.*
 

Documentation/kernel.md

@@ -1,22 +1,19 @@
 
 # Kernel Version
 
-Default Kernel tree: 5.15
+Default Kernel tree: 5.10
 
 | Board | Version |
 |-------|---------|
-| Open Virtual Appliance | 5.15.41 |
-| Raspberry Pi | 5.15.32 |
-| Raspberry Pi 0-W | 5.15.32 |
-| Raspberry Pi 2 | 5.15.32 |
-| Raspberry Pi 3 | 5.15.32 |
-| Raspberry Pi 4 | 5.15.32 |
-| Home Assistant Yellow | 5.15.32 |
-| Tinker Board | 5.15.41 |
-| Odroid-C2 | 5.15.41 |
-| Odroid-C4 | 5.15.41 |
-| Odroid-N2 | 5.15.41 |
-| Odroid-XU4 | 5.15.41 |
-| Generic aarch64 | 5.15.41 |
-| Generic x86-64 | 5.15.41 |
-| Khadas VIM3 | 5.15.41 |
+| Open Virtual Appliance | 5.10.91 |
+| Raspberry Pi | 5.10.63 |
+| Raspberry Pi 0-W | 5.10.63 |
+| Raspberry Pi 2 | 5.10.63 |
+| Raspberry Pi 3 | 5.10.63 |
+| Raspberry Pi 4 | 5.10.63 |
+| Tinker Board | 5.10.91 |
+| Odroid-C2 | 5.10.91 |
+| Odroid-C4 | 5.10.91 |
+| Odroid-N2 | 5.10.91 |
+| Odroid-XU4 | 5.10.91 |
+| Generic x86-64 | 5.10.91 |

Documentation/network.md

@@ -128,14 +128,6 @@ profile using DHCP, use the following commands on the host console:
 
 Home Assistant OS will recreate the default connection profile during boot.
 
-### Enabling WiFi
-
-WiFi is discouraged for reliability reasons. However if you're still like to use WiFi, you can us the `ha network` command to set up WiFi (example for a Raspberry Pi 4, check `ha network info` to check if your board supports WiFi and the name of the WiFi device):
-
-```bash
-ha network update wlan0 --enabled --ipv4-method auto --wifi-auth wpa-psk --wifi-mode infrastructure --wifi-ssid MY-SSID --wifi-psk MY_PASS
-````
-
 ### Powersave
 
 If you have trouble with powersave then apply the following changes:

Makefile

@@ -26,10 +26,6 @@ all: $(TARGETS)
 $(RELEASE_DIR):
 	mkdir -p $(RELEASE_DIR)
 
-savedefconfig:
-	@echo "config $*"
-	$(MAKE) -C $(BUILDROOT) O=$(O) BR2_EXTERNAL=$(BUILDROOT_EXTERNAL) "savedefconfig"
-
 $(TARGETS_CONFIG): %-config:
 	@echo "config $*"
 	$(MAKE) -C $(BUILDROOT) O=$(O) BR2_EXTERNAL=$(BUILDROOT_EXTERNAL) "$*_defconfig"

README.md

@@ -16,8 +16,8 @@ Home Assistant Operating System uses Docker as Container engine. It by default d
 
 - Raspberry Pi
 - Hardkernel ODROID
+- Intel NUC
 - Asus Tinker Board
-- Generic x86-64 (e.g. Intel NUC)
 - Virtual appliances
 
 See the full list and specific models [here](./Documentation/boards/README.md)

buildroot-external/Config.in

@@ -1,17 +1,14 @@
-source "$BR2_EXTERNAL_HASSOS_PATH/package/bluetooth-rtl8723/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/eq3_char_loop/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/gasket/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/generic_raw_uart/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/hardkernel-boot/Config.in"
 source "$BR2_EXTERNAL_HASSOS_PATH/package/hassio/Config.in"
+source "$BR2_EXTERNAL_HASSOS_PATH/package/bluetooth-bcm43xx/Config.in"
+source "$BR2_EXTERNAL_HASSOS_PATH/package/bluetooth-rtl8723/Config.in"
+source "$BR2_EXTERNAL_HASSOS_PATH/package/hardkernel-boot/Config.in"
 source "$BR2_EXTERNAL_HASSOS_PATH/package/khadas-boot/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/os-agent/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/pi-bluetooth/Config.in"
 source "$BR2_EXTERNAL_HASSOS_PATH/package/qemu-guest-agent/Config.in"
+source "$BR2_EXTERNAL_HASSOS_PATH/package/intel-e1000e/Config.in"
 source "$BR2_EXTERNAL_HASSOS_PATH/package/rpi-eeprom/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/rpi-rf-mod/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/rtl88x2bu/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/rtl8821cu/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/tempio/Config.in.host"
+source "$BR2_EXTERNAL_HASSOS_PATH/package/os-agent/Config.in"
 source "$BR2_EXTERNAL_HASSOS_PATH/package/udisks2/Config.in"
+source "$BR2_EXTERNAL_HASSOS_PATH/package/eq3_char_loop/Config.in"
+source "$BR2_EXTERNAL_HASSOS_PATH/package/generic_raw_uart/Config.in"
+source "$BR2_EXTERNAL_HASSOS_PATH/package/rpi-rf-mod/Config.in"
 source "$BR2_EXTERNAL_HASSOS_PATH/package/xe-guest-utilities/Config.in"

buildroot-external/board/arm-uefi/generic-aarch64/cmdline.txt

@@ -1 +0,0 @@
-console=tty1 console=ttyS0

buildroot-external/board/arm-uefi/generic-aarch64/grub.cfg

@@ -1,59 +0,0 @@
-set default=99
-set timeout=1
-
-set ORDER="A B"
-set A_OK=0
-set B_OK=0
-set A_TRY=0
-set B_TRY=0
-set MACHINE_ID=""
-load_env
-
-# select bootable slot
-for SLOT in $ORDER; do
-    if [ "$SLOT" == "A" ]; then
-        INDEX=0
-        OK=$A_OK
-        TRY=$A_TRY
-        A_TRY=1
-    fi
-    if [ "$SLOT" == "B" ]; then
-        INDEX=1
-        OK=$B_OK
-        TRY=$B_TRY
-        B_TRY=1
-    fi
-    if [ "$OK" -eq 1 -a "$TRY" -eq 0 ]; then
-        default=$INDEX
-        break
-    fi
-done
-
-# reset booted flags
-if [ "$default" -eq 99 ]; then
-    if [ "$A_OK" -eq 1 -a "$A_TRY" -eq 1 ]; then
-        A_TRY=0
-    fi
-    if [ "$B_OK" -eq 1 -a "$B_TRY" -eq 1 ]; then
-        B_TRY=0
-    fi
-    default=0
-fi
-
-save_env A_TRY A_OK B_TRY B_OK ORDER MACHINE_ID
-
-default_cmdline="rootwait zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor systemd.machine_id=$MACHINE_ID cgroup_enable=memory fsck.repair=yes"
-file_env -f ($root)/cmdline.txt cmdline
-
-# root is a full HDD/partition definition in GRUB format like hd0,gpt1
-# We extract the part before the comma to then append our own partition index
-# at the end. This is hacky but the best way I found
-regexp --set 1:boothd (.+),.+ ${root}
-
-menuentry "Slot A (OK=$A_OK TRY=$A_TRY)" {
-    linux (${boothd},gpt2)/Image root=PARTUUID=8d3d53e3-6d49-4c38-8349-aff6859e82fd $default_cmdline $cmdline rauc.slot=A
-}
-
-menuentry "Slot B (OK=$B_OK TRY=$B_TRY)" {
-    linux (${boothd},gpt4)/Image root=PARTUUID=a3ec664e-32ce-4665-95ea-7ae90ce9aa20 $default_cmdline $cmdline rauc.slot=B
-}

buildroot-external/board/arm-uefi/generic-aarch64/hassos-hook.sh

@@ -1,27 +0,0 @@
-#!/bin/bash
-# shellcheck disable=SC2155
-
-function hassos_pre_image() {
-    local BOOT_DATA="$(path_boot_dir)"
-    local EFIPART_DATA="${BINARIES_DIR}/efi-part"
-
-    mkdir -p "${BOOT_DATA}/EFI/BOOT"
-
-    cp "${BOARD_DIR}/grub.cfg" "${EFIPART_DATA}/EFI/BOOT/grub.cfg"
-    cp "${BOARD_DIR}/cmdline.txt" "${EFIPART_DATA}/cmdline.txt"
-    grub-editenv "${EFIPART_DATA}/EFI/BOOT/grubenv" create
-
-    cp -r "${EFIPART_DATA}/"* "${BOOT_DATA}/"
-}
-
-
-function hassos_post_image() {
-    convert_disk_image_virtual vmdk
-    convert_disk_image_virtual qcow2
-
-    convert_disk_image_zip vmdk
-    convert_disk_image_xz qcow2
-
-    convert_disk_image_xz
-}
-

buildroot-external/board/arm-uefi/generic-aarch64/kernel.config

@@ -1,20 +0,0 @@
-CONFIG_EFI_STUB=y
-
-CONFIG_VIRTIO=y
-CONFIG_VIRTIO_PCI=y
-CONFIG_VIRTIO_NET=y
-CONFIG_VIRTIO_BALLOON=m
-CONFIG_VIRTIO_INPUT=m
-CONFIG_VIRTIO_BLK=y
-CONFIG_VIRTIO_BLK_SCSI=y
-CONFIG_VIRTIO_CONSOLE=m
-CONFIG_VIRTIO_VSOCKETS=m
-CONFIG_VIRTIO_MMIO=y
-CONFIG_SCSI_VIRTIO=y
-CONFIG_HW_RANDOM_VIRTIO=y
-
-CONFIG_NVME_CORE=y
-CONFIG_BLK_DEV_NVME=y
-CONFIG_NVME_HWMON=y
-
-CONFIG_DRM_VIRTIO_GPU=m

buildroot-external/board/arm-uefi/generic-aarch64/meta

@@ -1,10 +0,0 @@
-BOARD_ID=generic-aarch64
-BOARD_NAME="Generic aarch64"
-CHASSIS=embedded
-BOOTLOADER=grub
-KERNEL_FILE=Image
-BOOT_SYS=efi
-BOOT_SPL=false
-DISK_SIZE=6
-SUPERVISOR_MACHINE=qemuarm-64
-SUPERVISOR_ARCH=aarch64

buildroot-external/board/asus/tinker/kernel.config

@@ -1517,7 +1517,7 @@ CONFIG_BT_HCIBTUSB=y
 CONFIG_BT_HCIBTUSB_BCM=y
 CONFIG_BT_HCIBTUSB_RTL=y
 CONFIG_BT_HCIBTSDIO=y
-CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART=y
 CONFIG_BT_HCIUART_SERDEV=y
 CONFIG_BT_HCIUART_H4=y
 # CONFIG_BT_HCIUART_NOKIA is not set
@@ -1527,7 +1527,6 @@ CONFIG_BT_HCIUART_ATH3K=y
 CONFIG_BT_HCIUART_3WIRE=y
 # CONFIG_BT_HCIUART_INTEL is not set
 # CONFIG_BT_HCIUART_BCM is not set
-CONFIG_BT_HCIUART_RTL=y
 # CONFIG_BT_HCIUART_QCA is not set
 # CONFIG_BT_HCIUART_AG6XX is not set
 # CONFIG_BT_HCIUART_MRVL is not set
@@ -2475,7 +2474,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
 # CONFIG_SERIAL_ST_ASC is not set
 CONFIG_SERIAL_DEV_BUS=y
-CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
+# CONFIG_SERIAL_DEV_CTRL_TTYPORT is not set
 # CONFIG_TTY_PRINTK is not set
 # CONFIG_HVC_DCC is not set
 # CONFIG_IPMI_HANDLER is not set

buildroot-external/board/asus/tinker/patches/linux/0001-ARM-DTS-rk3288-tinker-Setup-the-Bluetooth-UART-pins.patch

@@ -0,0 +1,64 @@
+From 2ae3821fd824560ef2db3c87cfbec985177911f6 Mon Sep 17 00:00:00 2001
+Message-Id: <2ae3821fd824560ef2db3c87cfbec985177911f6.1599249626.git.stefan@agner.ch>
+From: "Miouyouyou (Myy)" <myy@miouyouyou.fr>
+Date: Mon, 5 Nov 2018 22:03:26 +0100
+Subject: [PATCH 1/2] ARM: DTS: rk3288-tinker: Setup the Bluetooth UART pins
+
+The most essential being the RTS pin, which is clearly needed to
+upload the initial configuration into the Realtek Bluetooth
+chip, and make the Bluetooth chip work.
+
+Now, the Bluetooth chip also needs 3 other GPIOS to be enabled.
+I'll see how I do that through the DTS file in a near future.
+
+The 3 GPIOS being :
+Bluetooth Reset : <&gpio4 29 GPIO_ACTIVE_HIGH>
+Bluetooth Wake  : <&gpio4 26 GPIO_ACTIVE_HIGH>
+Bluetooth Wake_Host_IRQ : <&gpio4 31 GPIO_ACTIVE_HIGH>
+
+These are currently setup manually, through scripts. But it seems that
+GPIO handling through /sys entries might not be possible in the long
+term, the replacement being libgpio.
+Anyway, if you're interesting in enabling the Bluetooth GPIO by hand,
+here are the commands :
+
+cd /sys/class/gpio &&
+echo 146 > export &&
+echo 149 > export &&
+echo 151 > export &&
+echo high > gpio146/direction &&
+echo high > gpio149/direction &&
+echo high > gpio151/direction
+
+Resetting the chip is done like this :
+
+echo "Resetting the Bluetooth chip"
+cd /sys/class/gpio/gpio149 &&
+echo 0 > value &&
+sleep 1 &&
+echo 1 > value &&
+sleep 1
+
+Signed-off-by: Miouyouyou (Myy) <myy@miouyouyou.fr>
+[move change to rk3288-tinker.dtsi]
+Signed-off-by: Stefan Agner <stefan@agner.ch>
+---
+ arch/arm/boot/dts/rk3288-tinker.dtsi | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
+index acfaa12ec239..284e7982925d 100644
+--- a/arch/arm/boot/dts/rk3288-tinker.dtsi
++++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
+@@ -492,6 +492,8 @@ &tsadc {
+ };
+ 
+ &uart0 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>;
+ 	status = "okay";
+ };
+ 
+-- 
+2.28.0
+

buildroot-external/board/asus/tinker/patches/linux/0001-Revert-ARM-dts-rockchip-use-DMA-channels-for-UARTs-f.patch

@@ -1,5 +1,5 @@
-From ff0c5c49024da05b47d4fcc4d115761c43eef7a6 Mon Sep 17 00:00:00 2001
-Message-Id: <ff0c5c49024da05b47d4fcc4d115761c43eef7a6.1652225232.git.stefan@agner.ch>
+From 3f3c4cd047234fb94de4d6b701d05ff0450890cf Mon Sep 17 00:00:00 2001
+Message-Id: <3f3c4cd047234fb94de4d6b701d05ff0450890cf.1613588152.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Wed, 17 Feb 2021 19:55:41 +0100
 Subject: [PATCH] Revert "ARM: dts: rockchip: use DMA channels for UARTs for
@@ -11,10 +11,10 @@ This reverts commit 3425fe335c29310f6628faf9a7947d07f32d8962.
  1 file changed, 8 deletions(-)
 
 diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
-index 4dcdcf17c977..ff6faa82192b 100644
+index 8fa80facc8cd..8636d95c45e1 100644
 --- a/arch/arm/boot/dts/rk3288.dtsi
 +++ b/arch/arm/boot/dts/rk3288.dtsi
-@@ -378,8 +378,6 @@ uart0: serial@ff180000 {
+@@ -422,8 +422,6 @@ uart0: serial@ff180000 {
  		reg-io-width = <4>;
  		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
  		clock-names = "baudclk", "apb_pclk";
@@ -23,7 +23,7 @@ index 4dcdcf17c977..ff6faa82192b 100644
  		pinctrl-names = "default";
  		pinctrl-0 = <&uart0_xfer>;
  		status = "disabled";
-@@ -393,8 +391,6 @@ uart1: serial@ff190000 {
+@@ -437,8 +435,6 @@ uart1: serial@ff190000 {
  		reg-io-width = <4>;
  		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
  		clock-names = "baudclk", "apb_pclk";
@@ -32,7 +32,7 @@ index 4dcdcf17c977..ff6faa82192b 100644
  		pinctrl-names = "default";
  		pinctrl-0 = <&uart1_xfer>;
  		status = "disabled";
-@@ -421,8 +417,6 @@ uart3: serial@ff1b0000 {
+@@ -465,8 +461,6 @@ uart3: serial@ff1b0000 {
  		reg-io-width = <4>;
  		clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
  		clock-names = "baudclk", "apb_pclk";
@@ -41,7 +41,7 @@ index 4dcdcf17c977..ff6faa82192b 100644
  		pinctrl-names = "default";
  		pinctrl-0 = <&uart3_xfer>;
  		status = "disabled";
-@@ -436,8 +430,6 @@ uart4: serial@ff1c0000 {
+@@ -480,8 +474,6 @@ uart4: serial@ff1c0000 {
  		reg-io-width = <4>;
  		clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
  		clock-names = "baudclk", "apb_pclk";
@@ -51,5 +51,5 @@ index 4dcdcf17c977..ff6faa82192b 100644
  		pinctrl-0 = <&uart4_xfer>;
  		status = "disabled";
 -- 
-2.36.1
+2.30.1
 

buildroot-external/board/asus/tinker/patches/linux/0002-ARM-DTS-rk3288-tinker-Defining-the-SPI-interface.patch

@@ -1,10 +1,10 @@
-From e73b4b762a0842cc75b2784e4c4267f6f4fc50c4 Mon Sep 17 00:00:00 2001
-Message-Id: <e73b4b762a0842cc75b2784e4c4267f6f4fc50c4.1652225232.git.stefan@agner.ch>
-In-Reply-To: <ff0c5c49024da05b47d4fcc4d115761c43eef7a6.1652225232.git.stefan@agner.ch>
-References: <ff0c5c49024da05b47d4fcc4d115761c43eef7a6.1652225232.git.stefan@agner.ch>
+From fc25c993bf2feb6e66d55bf03eb725ec688e47eb Mon Sep 17 00:00:00 2001
+Message-Id: <fc25c993bf2feb6e66d55bf03eb725ec688e47eb.1599250914.git.stefan@agner.ch>
+In-Reply-To: <2ae3821fd824560ef2db3c87cfbec985177911f6.1599250914.git.stefan@agner.ch>
+References: <2ae3821fd824560ef2db3c87cfbec985177911f6.1599250914.git.stefan@agner.ch>
 From: "Miouyouyou (Myy)" <myy@miouyouyou.fr>
 Date: Mon, 5 Nov 2018 22:15:14 +0100
-Subject: [PATCH] ARM: DTS: rk3288-tinker: Defining the SPI interface
+Subject: [PATCH 2/3] ARM: DTS: rk3288-tinker: Defining the SPI interface
 
 Taken from, and tested by @TonyMac32 .
 
@@ -21,7 +21,7 @@ Signed-off-by: Stefan Agner <stefan@agner.ch>
  1 file changed, 19 insertions(+)
 
 diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
-index 9c1e38c54eae..cf278bcc91ad 100644
+index 284e7982925d..d6cc66ab5bb1 100644
 --- a/arch/arm/boot/dts/rk3288-tinker.dtsi
 +++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
 @@ -485,6 +485,25 @@ &sdio0 {
@@ -51,5 +51,5 @@ index 9c1e38c54eae..cf278bcc91ad 100644
  	rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
  	rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
 -- 
-2.36.1
+2.28.0
 

buildroot-external/board/asus/tinker/patches/linux/0003-ARM-dts-rockchip-enable-I2C1-4-on-rk3288-tinker.patch

@@ -1,10 +1,10 @@
-From 00de5155d12a178b83961f459ddccd7fa08ec25c Mon Sep 17 00:00:00 2001
-Message-Id: <00de5155d12a178b83961f459ddccd7fa08ec25c.1652225232.git.stefan@agner.ch>
-In-Reply-To: <ff0c5c49024da05b47d4fcc4d115761c43eef7a6.1652225232.git.stefan@agner.ch>
-References: <ff0c5c49024da05b47d4fcc4d115761c43eef7a6.1652225232.git.stefan@agner.ch>
+From 3a9d71847ae869ffdb2b0818aa86a36d57d96331 Mon Sep 17 00:00:00 2001
+Message-Id: <3a9d71847ae869ffdb2b0818aa86a36d57d96331.1599250914.git.stefan@agner.ch>
+In-Reply-To: <2ae3821fd824560ef2db3c87cfbec985177911f6.1599250914.git.stefan@agner.ch>
+References: <2ae3821fd824560ef2db3c87cfbec985177911f6.1599250914.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Fri, 4 Sep 2020 21:57:55 +0200
-Subject: [PATCH] ARM: dts: rockchip: enable I2C1/4 on rk3288-tinker
+Subject: [PATCH 3/3] ARM: dts: rockchip: enable I2C1/4 on rk3288-tinker
 
 Enable I2C devices which are accessible via 40-pin header.
 
@@ -14,7 +14,7 @@ Signed-off-by: Stefan Agner <stefan@agner.ch>
  1 file changed, 8 insertions(+)
 
 diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
-index cf278bcc91ad..f23c6efd39d4 100644
+index d6cc66ab5bb1..7af5818ac77c 100644
 --- a/arch/arm/boot/dts/rk3288-tinker.dtsi
 +++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
 @@ -344,10 +344,18 @@ regulator-state-mem {
@@ -37,5 +37,5 @@ index cf278bcc91ad..f23c6efd39d4 100644
  	status = "okay";
  };
 -- 
-2.36.1
+2.28.0
 

buildroot-external/board/asus/tinker/patches/linux/0007-ARM-dts-rockchip-Add-Bluetooth-to-rk3288-tinker.patch

@@ -1,63 +0,0 @@
-From 392472dc977300a9f2a62159c105a6dfed878643 Mon Sep 17 00:00:00 2001
-Message-Id: <392472dc977300a9f2a62159c105a6dfed878643.1652225232.git.stefan@agner.ch>
-In-Reply-To: <ff0c5c49024da05b47d4fcc4d115761c43eef7a6.1652225232.git.stefan@agner.ch>
-References: <ff0c5c49024da05b47d4fcc4d115761c43eef7a6.1652225232.git.stefan@agner.ch>
-From: Stefan Agner <stefan@agner.ch>
-Date: Tue, 10 May 2022 22:57:26 +0200
-Subject: [PATCH] ARM: dts: rockchip: Add Bluetooth to rk3288-tinker
-
-Enable Bluetooth support via UART0. Use the existing bindings
-for Realtek rtl8723bs Bluetooth device.
-
-Signed-off-by: Stefan Agner <stefan@agner.ch>
----
- arch/arm/boot/dts/rk3288-tinker.dtsi | 26 ++++++++++++++++++++++++++
- 1 file changed, 26 insertions(+)
-
-diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
-index cdff130d1292..e904c130dedc 100644
---- a/arch/arm/boot/dts/rk3288-tinker.dtsi
-+++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
-@@ -388,6 +388,20 @@ bl_en: bl-en {
- 		};
- 	};
- 
-+	bluetooth {
-+		bt_enable_pin: bt-enable-pin {
-+			rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+
-+		bt_device_wake_pin: bt-device-wake-pin {
-+			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+
-+		bt_host_wake_pin: bt-host-wake-pin {
-+			rockchip,pins = <4 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+	};
-+
- 	buttons {
- 		pwrbtn: pwrbtn {
- 			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
-@@ -520,6 +534,18 @@ &tsadc {
- 
- &uart0 {
- 	status = "okay";
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
-+	uart-has-rtscts;
-+
-+	bluetooth {
-+		compatible = "realtek,rtl8723bs-bt";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&bt_device_wake_pin &bt_host_wake_pin &bt_enable_pin>;
-+		enable-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>;
-+		device-wake-gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
-+		host-wake-gpios = <&gpio4 RK_PD7 GPIO_ACTIVE_HIGH>;
-+	};
- };
- 
- &uart1 {
--- 
-2.36.1
-

buildroot-external/board/asus/tinker/patches/linux/1007-RK3288-DTSI-rk3288-Add-missing-SPI2-pinctrl.patch

@@ -1,10 +1,7 @@
-From e45da42e71e4f92995d5ec11679ca00b0971dbfe Mon Sep 17 00:00:00 2001
-Message-Id: <e45da42e71e4f92995d5ec11679ca00b0971dbfe.1652225232.git.stefan@agner.ch>
-In-Reply-To: <ff0c5c49024da05b47d4fcc4d115761c43eef7a6.1652225232.git.stefan@agner.ch>
-References: <ff0c5c49024da05b47d4fcc4d115761c43eef7a6.1652225232.git.stefan@agner.ch>
+From 062488e4b8fd552c01e1104b3bc91a6f7ffe6c41 Mon Sep 17 00:00:00 2001
 From: Myy Miouyouyou <myy@miouyouyou.fr>
 Date: Thu, 19 Oct 2017 21:24:47 +0200
-Subject: [PATCH] RK3288: DTSI: rk3288.dtsi: Add missing SPI2 pinctrl
+Subject: [PATCH 10/28] RK3288: DTSI: rk3288.dtsi: Add missing SPI2 pinctrl
 
 The spi2_cs1 pin reference is missing in the spi2 first pin control
 definition.
@@ -17,10 +14,10 @@ Signed-off-by: Myy Miouyouyou <myy@miouyouyou.fr>
  1 file changed, 1 insertion(+), 1 deletion(-)
 
 diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
-index ff6faa82192b..5061c5418d75 100644
+index 5b789528..9ed532cc 100644
 --- a/arch/arm/boot/dts/rk3288.dtsi
 +++ b/arch/arm/boot/dts/rk3288.dtsi
-@@ -311,7 +311,7 @@ spi2: spi@ff130000 {
+@@ -334,7 +334,7 @@
  		dma-names = "tx", "rx";
  		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
  		pinctrl-names = "default";
@@ -30,5 +27,5 @@ index ff6faa82192b..5061c5418d75 100644
  		#address-cells = <1>;
  		#size-cells = <0>;
 -- 
-2.36.1
+2.11.0
 

buildroot-external/board/asus/tinker/patches/linux/1013-ARM-DTS-rk3288-tinker-Enabling-SDIO-and-Wifi.patch

@@ -0,0 +1,98 @@
+From d5d5c53173c484a13cda62a537cbf75a5df4b0e4 Mon Sep 17 00:00:00 2001
+From: "Miouyouyou (Myy)" <myy@miouyouyou.fr>
+Date: Mon, 5 Nov 2018 21:58:56 +0100
+Subject: [PATCH] ARM: DTS: rk3288-tinker: Enabling SDIO and Wifi
+
+Adding the appropriate nodes in order to exploit the WiFi capabilities
+of the board.
+Since these capabilities are provided through SDIO, and the SDIO
+nodes were not defined, these were added too.
+
+These seems to depend on each other so they are added in one big
+patch.
+
+Split if necessary.
+
+Signed-off-by: Miouyouyou (Myy) <myy@miouyouyou.fr>
+---
+ arch/arm/boot/dts/rk3288-tinker.dts | 62 +++++++++++++++++++++++++++++++++++++
+ 1 file changed, 62 insertions(+)
+
+diff --git a/arch/arm/boot/dts/rk3288-tinker.dts b/arch/arm/boot/dts/rk3288-tinker.dts
+index 1e43527aa..d4df13bed 100644
+--- a/arch/arm/boot/dts/rk3288-tinker.dts
++++ b/arch/arm/boot/dts/rk3288-tinker.dts
+@@ -6,8 +6,70 @@
+ /dts-v1/;
+ 
+ #include "rk3288-tinker.dtsi"
++#include <dt-bindings/clock/rockchip,rk808.h>
+ 
+ / {
+ 	model = "Rockchip RK3288 Asus Tinker Board";
+ 	compatible = "asus,rk3288-tinker", "rockchip,rk3288";
++
++	/* This is essential to get SDIO devices working.
++	   The Wifi depends on SDIO ! */
++	sdio_pwrseq: sdio-pwrseq {
++		compatible = "mmc-pwrseq-simple";
++		clocks = <&rk808 RK808_CLKOUT1>;
++		clock-names = "ext_clock";
++		pinctrl-names = "default";
++		pinctrl-0 = <&chip_enable_h>, <&wifi_enable_h>;
++
++		/*
++		 * On the module itself this is one of these (depending
++		 * on the actual card populated):
++		 * - SDIO_RESET_L_WL_REG_ON
++		 * - PDN (power down when low)
++		 */
++		reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>, <&gpio4 27 GPIO_ACTIVE_LOW>;
++	};
++
++	wireless-wlan {
++		compatible = "wlan-platdata";
++		rockchip,grf = <&grf>;
++		sdio_vref = <1800>;
++		status = "okay";
++		wifi_chip_type = "8723bs";
++		WIFI,host_wake_irq = <&gpio4 30 GPIO_ACTIVE_HIGH>;
++	};
++};
++
++&io_domains {
++	wifi-supply = <&vcc_18>;
++};
++
++&pinctrl {
++	sdio-pwrseq {
++		wifi_enable_h: wifienable-h {
++			rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++
++		chip_enable_h: chip-enable-h {
++			rockchip,pins = <4 27 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++	};
++};
++
++&sdio0 {
++	bus-width = <4>;
++	cap-sd-highspeed;
++	cap-sdio-irq;
++	clock-frequency = <50000000>;
++	clock-freq-min-max = <200000 50000000>;
++	disable-wp;
++	keep-power-in-suspend;
++	mmc-pwrseq = <&sdio_pwrseq>;
++	non-removable;
++	num-slots = <1>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
++	sd-uhs-sdr104;
++	status = "okay";
++	supports-sdio;
+ };
+-- 
+2.16.4
+

buildroot-external/board/asus/tinker/patches/linux/1015-ARM-DTSI-rk3288-tinker-Improving-the-CPU-max-voltage.patch

@@ -1,7 +1,4 @@
-From e33d3ba4c34d0893d9d07b62ad4eea41d2e8bbc0 Mon Sep 17 00:00:00 2001
-Message-Id: <e33d3ba4c34d0893d9d07b62ad4eea41d2e8bbc0.1652225232.git.stefan@agner.ch>
-In-Reply-To: <ff0c5c49024da05b47d4fcc4d115761c43eef7a6.1652225232.git.stefan@agner.ch>
-References: <ff0c5c49024da05b47d4fcc4d115761c43eef7a6.1652225232.git.stefan@agner.ch>
+From ebc29962ac27264772a4227f5abd6900cb72fa79 Mon Sep 17 00:00:00 2001
 From: "Miouyouyou (Myy)" <myy@miouyouyou.fr>
 Date: Mon, 5 Nov 2018 20:16:05 +0100
 Subject: [PATCH] ARM: DTSI: rk3288-tinker: Improving the CPU max voltage
@@ -14,10 +11,10 @@ Signed-off-by: Miouyouyou (Myy) <myy@miouyouyou.fr>
  1 file changed, 1 insertion(+), 1 deletion(-)
 
 diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
-index f23c6efd39d4..cdff130d1292 100644
+index aa107ee41..3da1c830f 100644
 --- a/arch/arm/boot/dts/rk3288-tinker.dtsi
 +++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
-@@ -186,7 +186,7 @@ vdd_cpu: DCDC_REG1 {
+@@ -164,7 +164,7 @@
  				regulator-always-on;
  				regulator-boot-on;
  				regulator-min-microvolt = <750000>;
@@ -27,5 +24,5 @@ index f23c6efd39d4..cdff130d1292 100644
  				regulator-ramp-delay = <6000>;
  				regulator-state-mem {
 -- 
-2.36.1
+2.16.4
 

buildroot-external/board/asus/tinker/patches/linux/2005-drivers-mmc-dw-mci-rockchip-Handle-ASUS-Tinkerboard.patch

@@ -1,7 +1,4 @@
-From e073d75cd0dbfbcbbf1b46e565b326db37b75e6a Mon Sep 17 00:00:00 2001
-Message-Id: <e073d75cd0dbfbcbbf1b46e565b326db37b75e6a.1652225232.git.stefan@agner.ch>
-In-Reply-To: <ff0c5c49024da05b47d4fcc4d115761c43eef7a6.1652225232.git.stefan@agner.ch>
-References: <ff0c5c49024da05b47d4fcc4d115761c43eef7a6.1652225232.git.stefan@agner.ch>
+From 302cd9b8a9f1f8a7735fabea3b9a7645dc40f9cc Mon Sep 17 00:00:00 2001
 From: Myy Miouyouyou <myy@miouyouyou.fr>
 Date: Sun, 7 Jan 2018 01:52:44 +0100
 Subject: [PATCH] drivers: mmc: dw-mci-rockchip: Handle ASUS Tinkerboard reboot
@@ -20,14 +17,14 @@ similar effects with eMMC hardware.
 
 Signed-off-by: Myy Miouyouyou <myy@miouyouyou.fr>
 ---
- drivers/mmc/host/dw_mmc-rockchip.c | 66 ++++++++++++++++++++++++++++++
+ drivers/mmc/host/dw_mmc-rockchip.c | 66 ++++++++++++++++++++++++++++++++++++++
  1 file changed, 66 insertions(+)
 
 diff --git a/drivers/mmc/host/dw_mmc-rockchip.c b/drivers/mmc/host/dw_mmc-rockchip.c
-index d36991acd6df..a526927e29df 100644
+index a3f1c2b30..7eac1f221 100644
 --- a/drivers/mmc/host/dw_mmc-rockchip.c
 +++ b/drivers/mmc/host/dw_mmc-rockchip.c
-@@ -12,6 +12,11 @@
+@@ -16,6 +16,11 @@
  #include <linux/pm_runtime.h>
  #include <linux/slab.h>
  
@@ -39,7 +36,7 @@ index d36991acd6df..a526927e29df 100644
  #include "dw_mmc.h"
  #include "dw_mmc-pltfm.h"
  
-@@ -330,6 +335,66 @@ static const struct of_device_id dw_mci_rockchip_match[] = {
+@@ -334,6 +339,66 @@ static const struct of_device_id dw_mci_rockchip_match[] = {
  };
  MODULE_DEVICE_TABLE(of, dw_mci_rockchip_match);
  
@@ -106,7 +103,7 @@ index d36991acd6df..a526927e29df 100644
  static int dw_mci_rockchip_probe(struct platform_device *pdev)
  {
  	const struct dw_mci_drv_data *drv_data;
-@@ -357,6 +422,7 @@ static int dw_mci_rockchip_probe(struct platform_device *pdev)
+@@ -361,6 +426,7 @@ static int dw_mci_rockchip_probe(struct platform_device *pdev)
  	}
  
  	pm_runtime_put_autosuspend(&pdev->dev);
@@ -115,5 +112,5 @@ index d36991acd6df..a526927e29df 100644
  	return 0;
  }
 -- 
-2.36.1
+2.14.1
 

buildroot-external/board/asus/tinker/patches/uboot/0001-SPL-modify-load-address-of-U-Boot.patch

@@ -1,5 +1,5 @@
-From 966cd1782632bc8279667955ec315e93c89495e6 Mon Sep 17 00:00:00 2001
-Message-Id: <966cd1782632bc8279667955ec315e93c89495e6.1645627366.git.stefan@agner.ch>
+From e18419a214ba872d14462354886148f976312e3c Mon Sep 17 00:00:00 2001
+Message-Id: <e18419a214ba872d14462354886148f976312e3c.1632758899.git.stefan@agner.ch>
 From: Pascal Vizeli <pvizeli@syshack.ch>
 Date: Fri, 24 Apr 2020 12:41:50 +0000
 Subject: [PATCH 1/2] SPL: modify load address of U-Boot
@@ -15,23 +15,23 @@ Signed-off-by: Stefan Agner <stefan@agner.ch>
  2 files changed, 2 insertions(+)
 
 diff --git a/configs/tinker-rk3288_defconfig b/configs/tinker-rk3288_defconfig
-index a9c9a122f6..b839fdb570 100644
+index 3ac314ab89..67ca98c383 100644
 --- a/configs/tinker-rk3288_defconfig
 +++ b/configs/tinker-rk3288_defconfig
-@@ -92,3 +92,4 @@ CONFIG_VIDEO_ROCKCHIP=y
+@@ -88,3 +88,4 @@ CONFIG_VIDEO_ROCKCHIP=y
  CONFIG_DISPLAY_ROCKCHIP_HDMI=y
  CONFIG_CMD_DHRYSTONE=y
  CONFIG_ERRNO_STR=y
 +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x2000
 diff --git a/configs/tinker-s-rk3288_defconfig b/configs/tinker-s-rk3288_defconfig
-index f367c9370f..c52b0753ec 100644
+index 35e84b7088..93cfe4f094 100644
 --- a/configs/tinker-s-rk3288_defconfig
 +++ b/configs/tinker-s-rk3288_defconfig
-@@ -94,3 +94,4 @@ CONFIG_DISPLAY_ROCKCHIP_HDMI=y
+@@ -90,3 +90,4 @@ CONFIG_DISPLAY_ROCKCHIP_HDMI=y
  CONFIG_CONSOLE_SCROLL_LINES=10
  CONFIG_CMD_DHRYSTONE=y
  CONFIG_ERRNO_STR=y
 +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x2000
 -- 
-2.35.1
+2.33.0
 

buildroot-external/board/asus/tinker/patches/uboot/0002-pmic-enable-LDO2-vcc33_mipi-at-bootup.patch

@@ -1,7 +1,7 @@
-From 98674c65a6595e7ac554f7ec9d6f0228556756f6 Mon Sep 17 00:00:00 2001
-Message-Id: <98674c65a6595e7ac554f7ec9d6f0228556756f6.1645627366.git.stefan@agner.ch>
-In-Reply-To: <966cd1782632bc8279667955ec315e93c89495e6.1645627366.git.stefan@agner.ch>
-References: <966cd1782632bc8279667955ec315e93c89495e6.1645627366.git.stefan@agner.ch>
+From 4c09e7741c219ef28be912e97a986b6402290c9b Mon Sep 17 00:00:00 2001
+Message-Id: <4c09e7741c219ef28be912e97a986b6402290c9b.1632758899.git.stefan@agner.ch>
+In-Reply-To: <e18419a214ba872d14462354886148f976312e3c.1632758899.git.stefan@agner.ch>
+References: <e18419a214ba872d14462354886148f976312e3c.1632758899.git.stefan@agner.ch>
 From: Pascal Vizeli <pvizeli@syshack.ch>
 Date: Fri, 24 Apr 2020 11:37:55 +0000
 Subject: [PATCH 2/2] pmic: enable LDO2 vcc33_mipi at bootup
@@ -64,5 +64,5 @@ index f85209c649..6fa1bb0c66 100644
 +}
 +#endif
 -- 
-2.35.1
+2.33.0
 

buildroot-external/board/hardkernel/patches/linux/0001-arm64-dts-meson-add-i2c3-rtc-nodes-and-rtc-aliases-t.patch

@@ -0,0 +1,53 @@
+From c7825747afd8bb975dc918f28e4afe8058a518f3 Mon Sep 17 00:00:00 2001
+Message-Id: <c7825747afd8bb975dc918f28e4afe8058a518f3.1642331593.git.stefan@agner.ch>
+From: Christian Hewitt <christianshewitt@gmail.com>
+Date: Mon, 11 Jan 2021 13:58:31 +0000
+Subject: [PATCH 01/10] arm64: dts: meson: add i2c3/rtc nodes and rtc aliases
+ to ODROID-N2 dtsi
+
+Enable the onboard pcf8563 rtc hardware on ODROID N2/N2+ boards via the
+common dtsi. Also add aliases to ensure vrtc does not claim /dev/rtc0.
+
+Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
+Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
+Signed-off-by: Kevin Hilman <khilman@baylibre.com>
+Link: https://lore.kernel.org/r/20210111135831.2218-1-christianshewitt@gmail.com
+---
+ .../boot/dts/amlogic/meson-g12b-odroid-n2.dtsi     | 14 ++++++++++++++
+ 1 file changed, 14 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+index 39a09661c5f6..b78be3e6974d 100644
+--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
++++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+@@ -13,6 +13,8 @@ / {
+ 	aliases {
+ 		serial0 = &uart_AO;
+ 		ethernet0 = &ethmac;
++		rtc0 = &rtc;
++		rtc1 = &vrtc;
+ 	};
+ 
+ 	dioo2133: audio-amplifier-0 {
+@@ -478,6 +480,18 @@ &ir {
+ 	linux,rc-map-name = "rc-odroid";
+ };
+ 
++&i2c3 {
++	status = "okay";
++	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
++	pinctrl-names = "default";
++
++	rtc: rtc@51 {
++		compatible = "nxp,pcf8563";
++		reg = <0x51>;
++		wakeup-source;
++	};
++};
++
+ &pwm_ab {
+ 	pinctrl-0 = <&pwm_a_e_pins>;
+ 	pinctrl-names = "default";
+-- 
+2.34.1
+

buildroot-external/board/hardkernel/patches/linux/0002-arm64-dts-meson-add-saradc-node-to-ODROID-N2-N2.patch

@@ -0,0 +1,37 @@
+From ec3b1240b428c5652ccb7fdadad217a2ff8ab4db Mon Sep 17 00:00:00 2001
+Message-Id: <ec3b1240b428c5652ccb7fdadad217a2ff8ab4db.1642331593.git.stefan@agner.ch>
+In-Reply-To: <c7825747afd8bb975dc918f28e4afe8058a518f3.1642331593.git.stefan@agner.ch>
+References: <c7825747afd8bb975dc918f28e4afe8058a518f3.1642331593.git.stefan@agner.ch>
+From: Hyeonki Hong <hhk7734@gmail.com>
+Date: Wed, 7 Apr 2021 04:26:08 +0000
+Subject: [PATCH 02/10] arm64: dts: meson: add saradc node to ODROID N2/N2+
+
+Add the meson saradc node to the ODROID N2/N2+ common dtsi.
+
+Signed-off-by: Hyeonki Hong <hhk7734@gmail.com>
+Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
+Signed-off-by: Kevin Hilman <khilman@baylibre.com>
+Link: https://lore.kernel.org/r/20210407042609.9736-3-christianshewitt@gmail.com
+---
+ arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 5 +++++
+ 1 file changed, 5 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+index b78be3e6974d..8a5e132c4b79 100644
+--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
++++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+@@ -508,6 +508,11 @@ &pwm_AO_cd {
+ 	status = "okay";
+ };
+ 
++&saradc {
++	status = "okay";
++	vref-supply = <&vddao_1v8>;
++};
++
+ /* SD card */
+ &sd_emmc_b {
+ 	status = "okay";
+-- 
+2.34.1
+

buildroot-external/board/hardkernel/patches/linux/0003-arm64-dts-meson-add-GPIO-line-names-to-ODROID-N2-N2.patch

@@ -0,0 +1,78 @@
+From 5ca49a58577f7e9e6f8e0b1cb7c97e756a0e921f Mon Sep 17 00:00:00 2001
+Message-Id: <5ca49a58577f7e9e6f8e0b1cb7c97e756a0e921f.1642331593.git.stefan@agner.ch>
+In-Reply-To: <c7825747afd8bb975dc918f28e4afe8058a518f3.1642331593.git.stefan@agner.ch>
+References: <c7825747afd8bb975dc918f28e4afe8058a518f3.1642331593.git.stefan@agner.ch>
+From: Hyeonki Hong <hhk7734@gmail.com>
+Date: Wed, 7 Apr 2021 04:26:09 +0000
+Subject: [PATCH 03/10] arm64: dts: meson: add GPIO line names to ODROID N2/N2+
+
+Add GPIO line-name identifiers to the ODROID N2/N2+ common dtsi.
+
+Signed-off-by: Hyeonki Hong <hhk7734@gmail.com>
+Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
+Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
+Signed-off-by: Kevin Hilman <khilman@baylibre.com>
+Link: https://lore.kernel.org/r/20210407042609.9736-4-christianshewitt@gmail.com
+---
+ .../dts/amlogic/meson-g12b-odroid-n2.dtsi     | 45 +++++++++++++++++++
+ 1 file changed, 45 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+index 8a5e132c4b79..41b2f9c96b5f 100644
+--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
++++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+@@ -446,6 +446,51 @@ &frddr_c {
+ };
+ 
+ &gpio {
++	gpio-line-names =
++		/* GPIOZ */
++		"", "", "", "", "", "", "", "",
++		"", "", "", "", "", "", "", "",
++		/* GPIOH */
++		"", "", "", "", "", "", "", "",
++		"",
++		/* BOOT */
++		"", "", "", "", "", "", "", "",
++		"", "", "", "", "", "", "", "",
++		/* GPIOC */
++		"", "", "", "", "", "", "", "",
++		/* GPIOA */
++		"PIN_44", /* GPIOA_0 */
++		"PIN_46", /* GPIOA_1 */
++		"PIN_45", /* GPIOA_2 */
++		"PIN_47", /* GPIOA_3 */
++		"PIN_26", /* GPIOA_4 */
++		"", "", "", "", "", "",
++		"PIN_42", /* GPIOA_11 */
++		"PIN_32", /* GPIOA_12 */
++		"PIN_7",  /* GPIOA_13 */
++		"PIN_27", /* GPIOA_14 */
++		"PIN_28", /* GPIOA_15 */
++		/* GPIOX */
++		"PIN_16", /* GPIOX_0 */
++		"PIN_18", /* GPIOX_1 */
++		"PIN_22", /* GPIOX_2 */
++		"PIN_11", /* GPIOX_3 */
++		"PIN_13", /* GPIOX_4 */
++		"PIN_33", /* GPIOX_5 */
++		"PIN_35", /* GPIOX_6 */
++		"PIN_15", /* GPIOX_7 */
++		"PIN_19", /* GPIOX_8 */
++		"PIN_21", /* GPIOX_9 */
++		"PIN_24", /* GPIOX_10 */
++		"PIN_23", /* GPIOX_11 */
++		"PIN_8",  /* GPIOX_12 */
++		"PIN_10", /* GPIOX_13 */
++		"PIN_29", /* GPIOX_14 */
++		"PIN_31", /* GPIOX_15 */
++		"PIN_12", /* GPIOX_16 */
++		"PIN_3",  /* GPIOX_17 */
++		"PIN_5",  /* GPIOX_18 */
++		"PIN_36"; /* GPIOX_19 */
+ 	/*
+ 	 * WARNING: The USB Hub on the Odroid-N2 needs a reset signal
+ 	 * to be turned high in order to be detected by the USB Controller
+-- 
+2.34.1
+

buildroot-external/board/hardkernel/patches/linux/0004-arm64-dts-meson-g12b-add-power-button-support.patch

@@ -1,8 +1,10 @@
-From 9f8390a715bc58e7423b65a18c4499761c84b819 Mon Sep 17 00:00:00 2001
-Message-Id: <9f8390a715bc58e7423b65a18c4499761c84b819.1646168061.git.stefan@agner.ch>
+From 70e65f906389f7236fe9ad8e1c05dedac0d1988b Mon Sep 17 00:00:00 2001
+Message-Id: <70e65f906389f7236fe9ad8e1c05dedac0d1988b.1642331593.git.stefan@agner.ch>
+In-Reply-To: <c7825747afd8bb975dc918f28e4afe8058a518f3.1642331593.git.stefan@agner.ch>
+References: <c7825747afd8bb975dc918f28e4afe8058a518f3.1642331593.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Mon, 11 Jan 2021 11:20:48 +0100
-Subject: [PATCH 1/7] arm64: dts: meson: g12b: add power button support
+Subject: [PATCH 04/10] arm64: dts: meson: g12b: add power button support
 
 Add power button support on J2 pin 11 (GPIOX_3 on the SoC side). The
 GPIO is low active, e.g. when connecting with pin 9 (GND) a power
@@ -14,7 +16,7 @@ Signed-off-by: Stefan Agner <stefan@agner.ch>
  1 file changed, 11 insertions(+)
 
 diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-index d33e54b5e196..5f0f036b1265 100644
+index 41b2f9c96b5f..4b6bb7e74e25 100644
 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
 +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
 @@ -39,6 +39,17 @@ emmc_pwrseq: emmc-pwrseq {
@@ -36,5 +38,5 @@ index d33e54b5e196..5f0f036b1265 100644
  		compatible = "gpio-leds";
  
 -- 
-2.35.1
+2.34.1
 

buildroot-external/board/hardkernel/patches/linux/0005-arm64-dts-meson-g12b-add-GPIO-fan-support.patch

@@ -1,10 +1,10 @@
-From 26917e25696e7156a85d4dfcc578cb4cf4f42dde Mon Sep 17 00:00:00 2001
-Message-Id: <26917e25696e7156a85d4dfcc578cb4cf4f42dde.1646168061.git.stefan@agner.ch>
-In-Reply-To: <9f8390a715bc58e7423b65a18c4499761c84b819.1646168061.git.stefan@agner.ch>
-References: <9f8390a715bc58e7423b65a18c4499761c84b819.1646168061.git.stefan@agner.ch>
+From 86d9151effff69d2a8fc2027a31dd60bd8c6eb05 Mon Sep 17 00:00:00 2001
+Message-Id: <86d9151effff69d2a8fc2027a31dd60bd8c6eb05.1642331593.git.stefan@agner.ch>
+In-Reply-To: <c7825747afd8bb975dc918f28e4afe8058a518f3.1642331593.git.stefan@agner.ch>
+References: <c7825747afd8bb975dc918f28e4afe8058a518f3.1642331593.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Mon, 11 Jan 2021 11:38:54 +0100
-Subject: [PATCH 2/7] arm64: dts: meson: g12b: add GPIO fan support
+Subject: [PATCH 05/10] arm64: dts: meson: g12b: add GPIO fan support
 
 Add simple GPIO fan node to support a fan on GPIO J8. Unfortunately the
 pad used to control the fan does not support real PWM, hence the RPM
@@ -16,7 +16,7 @@ Signed-off-by: Stefan Agner <stefan@agner.ch>
  1 file changed, 11 insertions(+)
 
 diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-index 5f0f036b1265..36dbd2666015 100644
+index 4b6bb7e74e25..e8a3ede698b5 100644
 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
 +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
 @@ -39,6 +39,17 @@ emmc_pwrseq: emmc-pwrseq {
@@ -38,5 +38,5 @@ index 5f0f036b1265..36dbd2666015 100644
  		compatible = "gpio-keys-polled";
  		poll-interval = <100>;
 -- 
-2.35.1
+2.34.1
 

buildroot-external/board/hardkernel/patches/linux/0006-ODROID-C4-arm64-dts-add-uart_A-node.patch

@@ -1,43 +0,0 @@
-From 0ad900b2d6e895b1f1788d51e471863743727d71 Mon Sep 17 00:00:00 2001
-Message-Id: <0ad900b2d6e895b1f1788d51e471863743727d71.1646168061.git.stefan@agner.ch>
-In-Reply-To: <9f8390a715bc58e7423b65a18c4499761c84b819.1646168061.git.stefan@agner.ch>
-References: <9f8390a715bc58e7423b65a18c4499761c84b819.1646168061.git.stefan@agner.ch>
-From: Hyeonki Hong <hhk7734@gmail.com>
-Date: Tue, 1 Mar 2022 21:51:50 +0100
-Subject: [PATCH 6/7] ODROID-C4: arm64/dts: add uart_A node
-
----
- arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi | 9 ++++++++-
- 1 file changed, 8 insertions(+), 1 deletion(-)
-
-diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
-index 76ad052fbf0c..690e4823a9d0 100644
---- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
-+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
-@@ -10,8 +10,9 @@
- 
- / {
- 	aliases {
--		serial0 = &uart_AO;
- 		ethernet0 = &ethmac;
-+		serial0 = &uart_AO;
-+		serial1 = &uart_A;
- 	};
- 
- 	chosen {
-@@ -436,6 +437,12 @@ &tohdmitx {
- 	status = "okay";
- };
- 
-+&uart_A {
-+	status = "okay";
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&uart_a_pins>;
-+};
-+
- &uart_AO {
- 	status = "okay";
- 	pinctrl-0 = <&uart_ao_a_pins>;
--- 
-2.35.1
-

buildroot-external/board/hardkernel/patches/linux/0006-arm64-dts-meson-g12b-odroid-n2-add-fan-as-cooling-de.patch

@@ -1,10 +1,10 @@
-From 5b2b8c960269eba18f0557bf49990b9c28e5e6af Mon Sep 17 00:00:00 2001
-Message-Id: <5b2b8c960269eba18f0557bf49990b9c28e5e6af.1646168061.git.stefan@agner.ch>
-In-Reply-To: <9f8390a715bc58e7423b65a18c4499761c84b819.1646168061.git.stefan@agner.ch>
-References: <9f8390a715bc58e7423b65a18c4499761c84b819.1646168061.git.stefan@agner.ch>
+From f1120f132dbdf2e7f7acf328de55bbdce877d882 Mon Sep 17 00:00:00 2001
+Message-Id: <f1120f132dbdf2e7f7acf328de55bbdce877d882.1642331593.git.stefan@agner.ch>
+In-Reply-To: <c7825747afd8bb975dc918f28e4afe8058a518f3.1642331593.git.stefan@agner.ch>
+References: <c7825747afd8bb975dc918f28e4afe8058a518f3.1642331593.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Mon, 11 Jan 2021 15:53:55 +0100
-Subject: [PATCH 3/7] arm64: dts: meson: g12b: odroid-n2: add fan as cooling
+Subject: [PATCH 06/10] arm64: dts: meson: g12b: odroid-n2: add fan as cooling
  device
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
@@ -21,7 +21,7 @@ Signed-off-by: Stefan Agner <stefan@agner.ch>
  1 file changed, 38 insertions(+)
 
 diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-index 36dbd2666015..5ca75696bd5c 100644
+index e8a3ede698b5..dd345c6aa4b5 100644
 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
 +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
 @@ -388,6 +388,44 @@ &clkc_audio {
@@ -70,5 +70,5 @@ index 36dbd2666015..5ca75696bd5c 100644
  	cpu-supply = <&vddcpu_b>;
  	operating-points-v2 = <&cpu_opp_table_0>;
 -- 
-2.35.1
+2.34.1
 

buildroot-external/board/hardkernel/patches/linux/0007-arm64-dts-meson-add-uart_A-node.patch

@@ -1,10 +1,10 @@
-From fee88e0053de7878977913311bdb153494aa6c61 Mon Sep 17 00:00:00 2001
-Message-Id: <fee88e0053de7878977913311bdb153494aa6c61.1646168061.git.stefan@agner.ch>
-In-Reply-To: <9f8390a715bc58e7423b65a18c4499761c84b819.1646168061.git.stefan@agner.ch>
-References: <9f8390a715bc58e7423b65a18c4499761c84b819.1646168061.git.stefan@agner.ch>
+From dcaf2dc71dd62487eb37561682934414a5795e0e Mon Sep 17 00:00:00 2001
+Message-Id: <dcaf2dc71dd62487eb37561682934414a5795e0e.1642331593.git.stefan@agner.ch>
+In-Reply-To: <c7825747afd8bb975dc918f28e4afe8058a518f3.1642331593.git.stefan@agner.ch>
+References: <c7825747afd8bb975dc918f28e4afe8058a518f3.1642331593.git.stefan@agner.ch>
 From: Hyeonki Hong <hhk7734@gmail.com>
 Date: Fri, 27 Mar 2020 17:05:22 +0900
-Subject: [PATCH 4/7] arm64: dts: meson: add uart_A node
+Subject: [PATCH 07/10] arm64: dts: meson: add uart_A node
 
 The UART_A is available through J3 pin 8/10 and documented to be
 available as UART by default.
@@ -15,7 +15,7 @@ Signed-off-by: Stefan Agner <stefan@agner.ch>
  1 file changed, 7 insertions(+)
 
 diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-index 5ca75696bd5c..738eb0339333 100644
+index dd345c6aa4b5..cec346178e3d 100644
 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
 +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
 @@ -12,6 +12,7 @@
@@ -40,5 +40,5 @@ index 5ca75696bd5c..738eb0339333 100644
  	status = "okay";
  	pinctrl-0 = <&uart_ao_a_pins>;
 -- 
-2.35.1
+2.34.1
 

buildroot-external/board/hardkernel/patches/linux/0008-arm64-dts-meson-add-i2c2-node-to-ODROID-N2-N2.patch

@@ -1,10 +1,10 @@
-From 51ded393003a60d3932081114bff142c4c69b293 Mon Sep 17 00:00:00 2001
-Message-Id: <51ded393003a60d3932081114bff142c4c69b293.1646168061.git.stefan@agner.ch>
-In-Reply-To: <9f8390a715bc58e7423b65a18c4499761c84b819.1646168061.git.stefan@agner.ch>
-References: <9f8390a715bc58e7423b65a18c4499761c84b819.1646168061.git.stefan@agner.ch>
+From d5d2d8b9eb93eab85af12f1844975903a7c5a879 Mon Sep 17 00:00:00 2001
+Message-Id: <d5d2d8b9eb93eab85af12f1844975903a7c5a879.1642331593.git.stefan@agner.ch>
+In-Reply-To: <c7825747afd8bb975dc918f28e4afe8058a518f3.1642331593.git.stefan@agner.ch>
+References: <c7825747afd8bb975dc918f28e4afe8058a518f3.1642331593.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Thu, 29 Apr 2021 21:32:43 +0200
-Subject: [PATCH 5/7] arm64: dts: meson: add i2c2 node to ODROID N2/N2+
+Subject: [PATCH 08/10] arm64: dts: meson: add i2c2 node to ODROID N2/N2+
 
 The J2 connectors pinout documents "I2C.SDA0/SCL0" on pin 3 and 5, which
 are connected to GPIOX_17/18. This GPIO allow to mux I2C to the second
@@ -16,7 +16,7 @@ Signed-off-by: Stefan Agner <stefan@agner.ch>
  1 file changed, 6 insertions(+)
 
 diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-index 738eb0339333..2e9fefc20b19 100644
+index cec346178e3d..f1c3356c78a0 100644
 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
 +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
 @@ -586,6 +586,12 @@ &ir {
@@ -33,5 +33,5 @@ index 738eb0339333..2e9fefc20b19 100644
  	status = "okay";
  	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
 -- 
-2.35.1
+2.34.1
 

buildroot-external/board/hardkernel/patches/linux/0009-Revert-of-fdt-Make-sure-no-map-does-not-remove-alrea.patch

@@ -0,0 +1,52 @@
+From 19c34c0ceb6302b07e1017c426796c4cf7322d13 Mon Sep 17 00:00:00 2001
+Message-Id: <19c34c0ceb6302b07e1017c426796c4cf7322d13.1642331593.git.stefan@agner.ch>
+In-Reply-To: <c7825747afd8bb975dc918f28e4afe8058a518f3.1642331593.git.stefan@agner.ch>
+References: <c7825747afd8bb975dc918f28e4afe8058a518f3.1642331593.git.stefan@agner.ch>
+From: Stefan Agner <stefan@agner.ch>
+Date: Mon, 26 Jul 2021 16:59:08 +0200
+Subject: [PATCH 09/10] Revert "of/fdt: Make sure no-map does not remove
+ already reserved regions"
+
+U-Boot on Hardkernel ODROID-N2 adds fdt "memreserve" entries alongside
+the reserved-memory nodes present in upstream Linux. This causes
+reserving memory with the no-map flag to fail:
+[    0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'secmon@5000000': base 0x0000000005000000, size 3 MiB
+
+This seems to cause kernel crashes such as:
+[129988.642342] SError Interrupt on CPU4, code 0xbf000000 -- SError
+
+Restore the bahavior of Linux kernel 5.9 and older and don't fail
+updating the mapping with no-map.
+
+This reverts commit 8a5a75e5e9e55de1cef5d83ca3589cb4899193ef.
+
+Signed-off-by: Stefan Agner <stefan@agner.ch>
+---
+ drivers/of/fdt.c | 10 +---------
+ 1 file changed, 1 insertion(+), 9 deletions(-)
+
+diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
+index 57ff31b6b1e4..7ef2246e0b1e 100644
+--- a/drivers/of/fdt.c
++++ b/drivers/of/fdt.c
+@@ -1149,16 +1149,8 @@ int __init __weak early_init_dt_mark_hotplug_memory_arch(u64 base, u64 size)
+ int __init __weak early_init_dt_reserve_memory_arch(phys_addr_t base,
+ 					phys_addr_t size, bool nomap)
+ {
+-	if (nomap) {
+-		/*
+-		 * If the memory is already reserved (by another region), we
+-		 * should not allow it to be marked nomap.
+-		 */
+-		if (memblock_is_region_reserved(base, size))
+-			return -EBUSY;
+-
++	if (nomap)
+ 		return memblock_mark_nomap(base, size);
+-	}
+ 	return memblock_reserve(base, size);
+ }
+ 
+-- 
+2.34.1
+

buildroot-external/board/hardkernel/patches/linux/0010-Revert-drm-meson_drv-add-shutdown-function.patch

@@ -0,0 +1,48 @@
+From be21685475a0739d44ca4c63fcb7f50b324593c9 Mon Sep 17 00:00:00 2001
+Message-Id: <be21685475a0739d44ca4c63fcb7f50b324593c9.1642331593.git.stefan@agner.ch>
+In-Reply-To: <c7825747afd8bb975dc918f28e4afe8058a518f3.1642331593.git.stefan@agner.ch>
+References: <c7825747afd8bb975dc918f28e4afe8058a518f3.1642331593.git.stefan@agner.ch>
+From: Stefan Agner <stefan@agner.ch>
+Date: Sun, 16 Jan 2022 12:12:29 +0100
+Subject: [PATCH 10/10] Revert "drm: meson_drv add shutdown function"
+
+This reverts commit d4ec1ffbdaa8939a208656e9c1440742c457ef16.
+
+It seems that this patch actually breaks reboot on ODROID-N2+.
+---
+ drivers/gpu/drm/meson/meson_drv.c | 12 ------------
+ 1 file changed, 12 deletions(-)
+
+diff --git a/drivers/gpu/drm/meson/meson_drv.c b/drivers/gpu/drm/meson/meson_drv.c
+index 2753067c08e6..3d1de9cbb1c8 100644
+--- a/drivers/gpu/drm/meson/meson_drv.c
++++ b/drivers/gpu/drm/meson/meson_drv.c
+@@ -482,17 +482,6 @@ static int meson_probe_remote(struct platform_device *pdev,
+ 	return count;
+ }
+ 
+-static void meson_drv_shutdown(struct platform_device *pdev)
+-{
+-	struct meson_drm *priv = dev_get_drvdata(&pdev->dev);
+-
+-	if (!priv)
+-		return;
+-
+-	drm_kms_helper_poll_fini(priv->drm);
+-	drm_atomic_helper_shutdown(priv->drm);
+-}
+-
+ static int meson_drv_probe(struct platform_device *pdev)
+ {
+ 	struct component_match *match = NULL;
+@@ -564,7 +553,6 @@ static const struct dev_pm_ops meson_drv_pm_ops = {
+ 
+ static struct platform_driver meson_drm_platform_driver = {
+ 	.probe      = meson_drv_probe,
+-	.shutdown   = meson_drv_shutdown,
+ 	.driver     = {
+ 		.name	= "meson-drm",
+ 		.of_match_table = dt_match,
+-- 
+2.34.1
+

buildroot-external/board/hardkernel/patches/linux/hardkernel-0013-C4-arm64-dts-add-uart_A-node.patch

@@ -0,0 +1,41 @@
+From ca89096189299862a7b2b3123d96fc8bfbe74ce3 Mon Sep 17 00:00:00 2001
+From: Hyeonki Hong <hhk7734@gmail.com>
+Date: Tue, 14 Apr 2020 14:15:25 +0900
+Subject: [PATCH 13/74] ODROID-C4: arm64/dts: add uart_A node
+
+Change-Id: Ib66a03da2fcf39fc459c20c9f98b1baca34dcf5b
+---
+ arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts | 9 ++++++++-
+ 1 file changed, 8 insertions(+), 1 deletion(-)
+
+diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
+index 1b749bd340ce..e5d73598c131 100644
+--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
++++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
+@@ -14,8 +14,9 @@ / {
+ 	model = "Hardkernel ODROID-C4";
+ 
+ 	aliases {
+-		serial0 = &uart_AO;
+ 		ethernet0 = &ethmac;
++		serial0 = &uart_AO;
++		serial1 = &uart_A;
+ 	};
+ 
+ 	chosen {
+@@ -385,6 +386,12 @@ &sd_emmc_c {
+ 	vqmmc-supply = <&flash_1v8>;
+ };
+ 
++&uart_A {
++	status = "okay";
++	pinctrl-names = "default";
++	pinctrl-0 = <&uart_a_pins>;
++};
++
+ &uart_AO {
+ 	status = "okay";
+ 	pinctrl-0 = <&uart_ao_a_pins>;
+-- 
+2.25.1
+

buildroot-external/board/hardkernel/patches/linux/hardkernel-0021-C4-arm64-dts-add-i2c2-i2c3-node.patch

@@ -1,30 +1,29 @@
-From 105003d49a505e0f0e033a6f3d945f745912c7b1 Mon Sep 17 00:00:00 2001
-Message-Id: <105003d49a505e0f0e033a6f3d945f745912c7b1.1646168061.git.stefan@agner.ch>
-In-Reply-To: <9f8390a715bc58e7423b65a18c4499761c84b819.1646168061.git.stefan@agner.ch>
-References: <9f8390a715bc58e7423b65a18c4499761c84b819.1646168061.git.stefan@agner.ch>
+From 400645dd70ae5a0efbbce35067c8674d380ed2a7 Mon Sep 17 00:00:00 2001
 From: Hyeonki Hong <hhk7734@gmail.com>
-Date: Tue, 1 Mar 2022 21:53:32 +0100
-Subject: [PATCH 7/7] ODROID-C4: arm64/dts: add i2c2, i2c3 node
+Date: Wed, 13 May 2020 10:37:28 +0900
+Subject: [PATCH 21/74] ODROID-C4: arm64/dts: add i2c2, i2c3 node
 
+Change-Id: Id75f935111744ff6945791deefef20f897dc98ac
+(cherry picked from commit 3f4b2ffd0905946175c478baa65361695e78e0de)
 ---
- .../boot/dts/amlogic/meson-sm1-odroid.dtsi    | 53 +++++++++++++++++++
+ .../boot/dts/amlogic/meson-sm1-odroid-c4.dts  | 53 +++++++++++++++++++
  1 file changed, 53 insertions(+)
 
-diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
-index 690e4823a9d0..85637c1c846b 100644
---- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
-+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
-@@ -11,6 +11,8 @@
- / {
+diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
+index 831053aa6dff..5988dc5f34d0 100644
+--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
++++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
+@@ -16,6 +16,8 @@ / {
+ 
  	aliases {
  		ethernet0 = &ethmac;
 +		i2c0 = &i2c2;
 +		i2c1 = &i2c3;
  		serial0 = &uart_AO;
  		serial1 = &uart_A;
- 	};
-@@ -373,6 +375,57 @@ &ir {
- 	pinctrl-names = "default";
+ 		spi0 = &spicc0;
+@@ -434,6 +436,57 @@ &ir {
+ 	linux,rc-map-name = "rc-odroid";
  };
  
 +&i2c2 {
@@ -82,5 +81,5 @@ index 690e4823a9d0..85637c1c846b 100644
  	pinctrl-0 = <&pwm_ao_d_e_pins>;
  	pinctrl-names = "default";
 -- 
-2.35.1
+2.25.1
 

buildroot-external/board/hardkernel/patches/uboot/0001-HACK-mmc-meson-gx-limit-to-24MHz.patch

@@ -1,5 +1,5 @@
-From 5d2feca5947f84259bae41730ce54231578b37be Mon Sep 17 00:00:00 2001
-Message-Id: <5d2feca5947f84259bae41730ce54231578b37be.1645627508.git.stefan@agner.ch>
+From ff82d04354784cd982ab1a912c08d3eb22f82d13 Mon Sep 17 00:00:00 2001
+Message-Id: <ff82d04354784cd982ab1a912c08d3eb22f82d13.1632758701.git.stefan@agner.ch>
 From: Neil Armstrong <narmstrong@baylibre.com>
 Date: Mon, 2 Sep 2019 15:42:04 +0200
 Subject: [PATCH] HACK: mmc: meson-gx: limit to 24MHz
@@ -23,5 +23,5 @@ index fcf4f03d1e..6ded4b619b 100644
  	cfg->name = dev->name;
  
 -- 
-2.35.1
+2.33.0
 

buildroot-external/board/khadas/kernel-vim.config

@@ -315,22 +315,8 @@ CONFIG_SPI_MESON_SPIFC=m
 CONFIG_SPI_PL022=y
 CONFIG_SPI_ROCKCHIP=y
 CONFIG_SPI_SPIDEV=m
-CONFIG_PINCTRL=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_PINMUX=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_PINCONF=y
-CONFIG_GENERIC_PINCONF=y
 CONFIG_PINCTRL_SINGLE=y
-CONFIG_PINCTRL_MESON=y
-CONFIG_PINCTRL_MESON_GXBB=y
-CONFIG_PINCTRL_MESON_GXL=y
-CONFIG_PINCTRL_MESON8_PMX=y
-CONFIG_PINCTRL_MESON_AXG=y
-CONFIG_PINCTRL_MESON_AXG_PMX=y
-CONFIG_PINCTRL_MESON_G12A=y
-CONFIG_PINCTRL_MESON_A1=y
-CONFIG_GPIOLIB=y
+CONFIG_PINCTRL_MAX77620=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_DWAPB=y
 CONFIG_GPIO_GENERIC_PLATFORM=y
@@ -356,7 +342,7 @@ CONFIG_THERMAL=y
 CONFIG_THERMAL_GOV_USER_SPACE=y
 CONFIG_CPU_THERMAL=y
 CONFIG_DEVFREQ_THERMAL=y
-CONFIG_KHADAS_MCU_FAN_THERMAL=y
+CONFIG_KHADAS_MCU_FAN_THERMAL=m
 CONFIG_WATCHDOG=y
 CONFIG_ARM_SP805_WATCHDOG=y
 CONFIG_DW_WATCHDOG=y
@@ -369,7 +355,7 @@ CONFIG_MFD_MAX77620=y
 CONFIG_MFD_RK808=y
 CONFIG_MFD_SEC_CORE=y
 CONFIG_MFD_ROHM_BD718XX=y
-CONFIG_MFD_KHADAS_MCU=y
+CONFIG_MFD_KHADAS_MCU=m
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_AXP20X=y

buildroot-external/board/pc/barebox.config

@@ -0,0 +1,10 @@
+CONFIG_MMU=y
+CONFIG_MALLOC_SIZE=0x0
+CONFIG_MALLOC_TLSF=y
+CONFIG_DRIVER_SERIAL_EFI=y
+CONFIG_DRIVER_SERIAL_EFI_STDIO=y
+# CONFIG_SPI is not set
+CONFIG_DISK=y
+CONFIG_DISK_WRITE=y
+CONFIG_FS_EFI=y
+CONFIG_FS_EFIVARFS=y

buildroot-external/board/pc/generic-x86-64/hassos-hook.sh

@@ -3,22 +3,13 @@
 
 function hassos_pre_image() {
     local BOOT_DATA="$(path_boot_dir)"
-    local EFIPART_DATA="${BINARIES_DIR}/efi-part"
 
     mkdir -p "${BOOT_DATA}/EFI/BOOT"
+    mkdir -p "${BOOT_DATA}/EFI/barebox"
 
-    cp "${BOARD_DIR}/../grub.cfg" "${EFIPART_DATA}/EFI/BOOT/grub.cfg"
-    cp "${BOARD_DIR}/cmdline.txt" "${EFIPART_DATA}/cmdline.txt"
-    grub-editenv "${EFIPART_DATA}/EFI/BOOT/grubenv-A" create
-    grub-editenv "${EFIPART_DATA}/EFI/BOOT/grubenv-A" set ORDER="A B"
-    grub-editenv "${EFIPART_DATA}/EFI/BOOT/grubenv-A" set A_OK=1
-    grub-editenv "${EFIPART_DATA}/EFI/BOOT/grubenv-A" set A_TRY=0
-    grub-editenv "${EFIPART_DATA}/EFI/BOOT/grubenv-B" create
-    grub-editenv "${EFIPART_DATA}/EFI/BOOT/grubenv-B" set ORDER="B A"
-    grub-editenv "${EFIPART_DATA}/EFI/BOOT/grubenv-B" set B_OK=1
-    grub-editenv "${EFIPART_DATA}/EFI/BOOT/grubenv-B" set B_TRY=0
-
-    cp -r "${EFIPART_DATA}/"* "${BOOT_DATA}/"
+    cp "${BINARIES_DIR}/barebox.bin" "${BOOT_DATA}/EFI/BOOT/BOOTx64.EFI"
+    cp "${BR2_EXTERNAL_HASSOS_PATH}/bootloader/barebox-state-efi.dtb" "${BOOT_DATA}/EFI/barebox/state.dtb"
+    cp "${BOARD_DIR}/cmdline.txt" "${BOOT_DATA}/cmdline.txt"
 }
 
 

buildroot-external/board/pc/generic-x86-64/kernel.config

@@ -4,6 +4,8 @@ CONFIG_SCSI_LOWLEVEL=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_BLK_DEV_NVME=y
 
+# CONFIG_E1000E is not set
+
 CONFIG_IGB=y
 CONFIG_IGC=m
 
@@ -22,20 +24,9 @@ CONFIG_TIGON3=m
 CONFIG_BNX2X=m
 CONFIG_BNXT=m
 
-CONFIG_WLAN_VENDOR_INTEL=y
-CONFIG_IWL4965=m
-CONFIG_IWL3945=m
 CONFIG_IWLWIFI=m
-CONFIG_IWLDVM=m
 CONFIG_IWLMVM=m
 
-CONFIG_SYSFB=y
-
-CONFIG_FB=y
-CONFIG_FB_EFI=y
-
-CONFIG_DRM=y
-CONFIG_DRM_FBDEV_EMULATION=y
 CONFIG_DRM_I915=m
 CONFIG_DRM_I915_CAPTURE_ERROR=y
 CONFIG_DRM_I915_COMPRESS_ERROR=y

buildroot-external/board/pc/generic-x86-64/meta

@@ -1,7 +1,7 @@
 BOARD_ID=generic-x86-64
 BOARD_NAME="Generic x86-64"
 CHASSIS=embedded
-BOOTLOADER=grub
+BOOTLOADER=barebox
 KERNEL_FILE=bzImage
 BOOT_SYS=efi
 BOOT_SPL=false

buildroot-external/board/pc/grub.cfg

@@ -1,59 +0,0 @@
-set default=99
-set timeout=1
-
-set ORDER="A B"
-set A_OK=0
-set B_OK=0
-set A_TRY=0
-set B_TRY=0
-set MACHINE_ID=""
-load_env
-
-# select bootable slot
-for SLOT in $ORDER; do
-    if [ "$SLOT" == "A" ]; then
-        INDEX=0
-        OK=$A_OK
-        TRY=$A_TRY
-        A_TRY=1
-    fi
-    if [ "$SLOT" == "B" ]; then
-        INDEX=1
-        OK=$B_OK
-        TRY=$B_TRY
-        B_TRY=1
-    fi
-    if [ "$OK" -eq 1 -a "$TRY" -eq 0 ]; then
-        default=$INDEX
-        break
-    fi
-done
-
-# reset booted flags
-if [ "$default" -eq 99 ]; then
-    if [ "$A_OK" -eq 1 -a "$A_TRY" -eq 1 ]; then
-        A_TRY=0
-    fi
-    if [ "$B_OK" -eq 1 -a "$B_TRY" -eq 1 ]; then
-        B_TRY=0
-    fi
-    default=0
-fi
-
-save_env A_TRY A_OK B_TRY B_OK ORDER MACHINE_ID
-
-default_cmdline="rootwait zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor systemd.machine_id=$MACHINE_ID cgroup_enable=memory fsck.repair=yes"
-file_env -f ($root)/cmdline.txt cmdline
-
-# root is a full HDD/partition definition in GRUB format like hd0,gpt1
-# We extract the part before the comma to then append our own partition index
-# at the end. This is hacky but the best way I found
-regexp --set 1:boothd (.+),.+ ${root}
-
-menuentry "Slot A (OK=$A_OK TRY=$A_TRY)" {
-    linux (${boothd},gpt2)/bzImage root=PARTUUID=8d3d53e3-6d49-4c38-8349-aff6859e82fd $default_cmdline $cmdline rauc.slot=A
-}
-
-menuentry "Slot B (OK=$B_OK TRY=$B_TRY)" {
-    linux (${boothd},gpt4)/bzImage root=PARTUUID=a3ec664e-32ce-4665-95ea-7ae90ce9aa20 $default_cmdline $cmdline rauc.slot=B
-}

buildroot-external/board/pc/ova/hassos-hook.sh

@@ -3,22 +3,13 @@
 
 function hassos_pre_image() {
     local BOOT_DATA="$(path_boot_dir)"
-    local EFIPART_DATA="${BINARIES_DIR}/efi-part"
 
     mkdir -p "${BOOT_DATA}/EFI/BOOT"
+    mkdir -p "${BOOT_DATA}/EFI/barebox"
 
-    cp "${BOARD_DIR}/../grub.cfg" "${EFIPART_DATA}/EFI/BOOT/grub.cfg"
-    cp "${BOARD_DIR}/cmdline.txt" "${EFIPART_DATA}/cmdline.txt"
-    grub-editenv "${EFIPART_DATA}/EFI/BOOT/grubenv-A" create
-    grub-editenv "${EFIPART_DATA}/EFI/BOOT/grubenv-A" set ORDER="A B"
-    grub-editenv "${EFIPART_DATA}/EFI/BOOT/grubenv-A" set A_OK=1
-    grub-editenv "${EFIPART_DATA}/EFI/BOOT/grubenv-A" set A_TRY=0
-    grub-editenv "${EFIPART_DATA}/EFI/BOOT/grubenv-B" create
-    grub-editenv "${EFIPART_DATA}/EFI/BOOT/grubenv-B" set ORDER="B A"
-    grub-editenv "${EFIPART_DATA}/EFI/BOOT/grubenv-B" set B_OK=1
-    grub-editenv "${EFIPART_DATA}/EFI/BOOT/grubenv-B" set B_TRY=0
-
-    cp -r "${EFIPART_DATA}/"* "${BOOT_DATA}/"
+    cp "${BINARIES_DIR}/barebox.bin" "${BOOT_DATA}/EFI/BOOT/BOOTx64.EFI"
+    cp "${BR2_EXTERNAL_HASSOS_PATH}/bootloader/barebox-state-efi.dtb" "${BOOT_DATA}/EFI/barebox/state.dtb"
+    cp "${BOARD_DIR}/cmdline.txt" "${BOOT_DATA}/cmdline.txt"
 }
 
 
@@ -26,10 +17,7 @@ function hassos_post_image() {
     local hdd_img="$(hassos_image_name img)"
 
     # Virtual Disk images
-    convert_disk_image_virtual vmdk
-    convert_disk_image_virtual vhdx
-    convert_disk_image_virtual vdi
-    convert_disk_image_virtual qcow2
+    convert_disk_image_virtual
 
     convert_disk_image_zip vmdk
     convert_disk_image_zip vhdx

buildroot-external/board/pc/ova/kernel.config

@@ -51,16 +51,6 @@ CONFIG_XEN_BLKDEV_FRONTEND=y
 CONFIG_SND_XEN_FRONTEND=y
 CONFIG_XEN_PVCALLS_FRONTEND=m
 CONFIG_XEN_WDT=y
-
-CONFIG_SYSFB=y
-CONFIG_SYSFB_SIMPLEFB=y
-
-CONFIG_FB=y
-CONFIG_FB_EFI=y
-
-CONFIG_DRM=y
-CONFIG_DRM_FBDEV_EMULATION=y
-CONFIG_DRM_SIMPLEDRM=y
 CONFIG_DRM_XEN=y
 
 CONFIG_HYPERVISOR_GUEST=y

buildroot-external/board/pc/ova/meta

@@ -1,7 +1,7 @@
 BOARD_ID=ova
 BOARD_NAME="Open Virtual Appliance"
 CHASSIS=vm
-BOOTLOADER=grub
+BOOTLOADER=barebox
 KERNEL_FILE=bzImage
 BOOT_SYS=efi
 BOOT_SPL=false

buildroot-external/board/pc/ova/rootfs-overlay/etc/systemd/logind.conf

@@ -1,45 +0,0 @@
-#  This file is part of systemd.
-#
-#  systemd is free software; you can redistribute it and/or modify it under the
-#  terms of the GNU Lesser General Public License as published by the Free
-#  Software Foundation; either version 2.1 of the License, or (at your option)
-#  any later version.
-#
-# Entries in this file show the compile time defaults. Local configuration
-# should be created by either modifying this file, or by creating "drop-ins" in
-# the logind.conf.d/ subdirectory. The latter is generally recommended.
-# Defaults can be restored by simply deleting this file and all drop-ins.
-#
-# Use 'systemd-analyze cat-config systemd/logind.conf' to display the full config.
-#
-# See logind.conf(5) for details.
-
-[Login]
-#NAutoVTs=6
-#ReserveVT=6
-#KillUserProcesses=yes
-#KillOnlyUsers=
-#KillExcludeUsers=root
-#InhibitDelayMaxSec=5
-#UserStopDelaySec=10
-#HandlePowerKey=poweroff
-#HandleSuspendKey=suspend
-#HandleHibernateKey=hibernate
-#HandleLidSwitch=suspend
-#HandleLidSwitchExternalPower=suspend
-#HandleLidSwitchDocked=ignore
-#HandleRebootKey=reboot
-#HandleRebootKeyLongPress=poweroff
-#PowerKeyIgnoreInhibited=no
-#SuspendKeyIgnoreInhibited=no
-#HibernateKeyIgnoreInhibited=no
-#LidSwitchIgnoreInhibited=yes
-#RebootKeyIgnoreInhibited=no
-#HoldoffTimeoutSec=30s
-#IdleAction=ignore
-#IdleActionSec=30min
-#RuntimeDirectorySize=10%
-#RuntimeDirectoryInodesMax=400k
-#RemoveIPC=yes
-#InhibitorsMax=8192
-#SessionsMax=8192

buildroot-external/board/pc/patches/linux/0001-iwlwifi-Make-missed-beacon-timeout-configurable.patch

@@ -1,5 +1,5 @@
-From d6be44a647dc6ae5ad2dcf44ff4a97030f1c498e Mon Sep 17 00:00:00 2001
-Message-Id: <d6be44a647dc6ae5ad2dcf44ff4a97030f1c498e.1646056626.git.stefan@agner.ch>
+From 332c4f164ac60dcc65c315841d9c6f064ae316ec Mon Sep 17 00:00:00 2001
+Message-Id: <332c4f164ac60dcc65c315841d9c6f064ae316ec.1639398304.git.stefan@agner.ch>
 From: Zachary Michaels <mikezackles@gmail.com>
 Date: Thu, 7 Jan 2021 08:13:11 -0800
 Subject: [PATCH] iwlwifi: Make missed beacon timeout configurable
@@ -19,10 +19,10 @@ Signed-off-by: Stefan Agner <stefan@agner.ch>
  4 files changed, 8 insertions(+), 2 deletions(-)
 
 diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
-index 524b0ad87357..a055674f14c6 100644
+index be214f39f52b..4401b6b8484a 100644
 --- a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
 +++ b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
-@@ -1711,6 +1711,7 @@ struct iwl_mod_params iwlwifi_mod_params = {
+@@ -1740,6 +1740,7 @@ struct iwl_mod_params iwlwifi_mod_params = {
  	.power_level = IWL_POWER_INDEX_1,
  	.uapsd_disable = IWL_DISABLE_UAPSD_BSS | IWL_DISABLE_UAPSD_P2P_CLIENT,
  	.enable_ini = true,
@@ -30,7 +30,7 @@ index 524b0ad87357..a055674f14c6 100644
  	/* the rest are 0 by default */
  };
  IWL_EXPORT_SYMBOL(iwlwifi_mod_params);
-@@ -1826,6 +1827,9 @@ module_param_named(enable_ini, iwlwifi_mod_params.enable_ini,
+@@ -1857,6 +1858,9 @@ module_param_named(enable_ini, iwlwifi_mod_params.enable_ini,
  		   bool, S_IRUGO | S_IWUSR);
  MODULE_PARM_DESC(enable_ini,
  		 "Enable debug INI TLV FW debug infrastructure (default: true");
@@ -41,10 +41,10 @@ index 524b0ad87357..a055674f14c6 100644
  /*
   * set bt_coex_active to true, uCode will do kill/defer
 diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-modparams.h b/drivers/net/wireless/intel/iwlwifi/iwl-modparams.h
-index 004ebdac4535..198c5ac2575b 100644
+index e8ce3a300857..801d12a27354 100644
 --- a/drivers/net/wireless/intel/iwlwifi/iwl-modparams.h
 +++ b/drivers/net/wireless/intel/iwlwifi/iwl-modparams.h
-@@ -62,6 +62,7 @@ enum iwl_uapsd_disable {
+@@ -115,6 +115,7 @@ enum iwl_uapsd_disable {
   * @disable_11ac: disable VHT capabilities, default = false.
   * @remove_when_gone: remove an inaccessible device from the PCIe bus.
   * @enable_ini: enable new FW debug infratructure (INI TLVs)
@@ -52,7 +52,7 @@ index 004ebdac4535..198c5ac2575b 100644
   */
  struct iwl_mod_params {
  	int swcrypto;
-@@ -84,6 +85,7 @@ struct iwl_mod_params {
+@@ -137,6 +138,7 @@ struct iwl_mod_params {
  	bool disable_11ax;
  	bool remove_when_gone;
  	bool enable_ini;
@@ -61,18 +61,18 @@ index 004ebdac4535..198c5ac2575b 100644
  
  static inline bool iwl_enable_rx_ampdu(void)
 diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c
-index fd352b2624a6..2f70a36b1af9 100644
+index 6a8bf9bb9c45..34dec6fc8f3e 100644
 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c
 +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c
-@@ -8,6 +8,7 @@
- #include <linux/crc32.h>
+@@ -63,6 +63,7 @@
+ #include <linux/etherdevice.h>
  #include <net/mac80211.h>
  #include "iwl-io.h"
 +#include "iwl-modparams.h"
  #include "iwl-prph.h"
  #include "fw-api.h"
  #include "mvm.h"
-@@ -1398,7 +1399,7 @@ void iwl_mvm_rx_missed_beacons_notif(struct iwl_mvm *mvm,
+@@ -1430,7 +1431,7 @@ void iwl_mvm_rx_missed_beacons_notif(struct iwl_mvm *mvm,
  	 * TODO: the threshold should be adjusted based on latency conditions,
  	 * and/or in case of a CS flow on one of the other AP vifs.
  	 */
@@ -82,10 +82,10 @@ index fd352b2624a6..2f70a36b1af9 100644
  	else if (rx_missed_bcon_since_rx > IWL_MVM_MISSED_BEACONS_THRESHOLD)
  		ieee80211_beacon_loss(vif);
 diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h
-index 46af8dd2dc93..bb05df29c88b 100644
+index 64f5a4cb3d3a..730638da8fd3 100644
 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h
 +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h
-@@ -38,7 +38,6 @@
+@@ -92,7 +92,6 @@
  /* RSSI offset for WkP */
  #define IWL_RSSI_OFFSET 50
  #define IWL_MVM_MISSED_BEACONS_THRESHOLD 8
@@ -94,5 +94,5 @@ index 46af8dd2dc93..bb05df29c88b 100644
  /* A TimeUnit is 1024 microsecond */
  #define MSEC_TO_TU(_msec)	(_msec*1000/1024)
 -- 
-2.35.1
+2.34.0
 

buildroot-external/board/pc/patches/rauc/0001-add-i-argument-to.patch

@@ -0,0 +1,36 @@
+From c9d56ea8fccf72e1c5d1f224f965e1a8e84d1b7f Mon Sep 17 00:00:00 2001
+From: Pascal Vizeli <pvizeli@syshack.ch>
+Date: Wed, 9 May 2018 21:54:58 +0200
+Subject: [PATCH 1/1] add -i argument to  barebox-state call
+
+---
+ src/bootchooser.c | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+diff --git a/src/bootchooser.c b/src/bootchooser.c
+index d5efc0c..c57c2f7 100644
+--- a/src/bootchooser.c
++++ b/src/bootchooser.c
+@@ -77,6 +77,9 @@ static gboolean barebox_state_get(const gchar* bootname, BareboxSlotState *bb_st
+ 	g_ptr_array_add(args, g_strdup_printf(BOOTSTATE_PREFIX ".%s.priority", bootname));
+ 	g_ptr_array_add(args, g_strdup("-g"));
+ 	g_ptr_array_add(args, g_strdup_printf(BOOTSTATE_PREFIX ".%s.remaining_attempts", bootname));
++
++	g_ptr_array_add(args, g_strdup("-i"));
++	g_ptr_array_add(args, g_strdup("/etc/barebox-state.dtb"));
+ 	g_ptr_array_add(args, NULL);
+ 
+ 	sub = g_subprocess_newv((const gchar * const *)args->pdata,
+@@ -170,6 +173,9 @@ static gboolean barebox_state_set(GPtrArray *pairs, GError **error)
+ 		g_ptr_array_add(args, g_strdup("-s"));
+ 		g_ptr_array_add(args, g_strdup(pairs->pdata[i]));
+ 	}
++
++	g_ptr_array_add(args, g_strdup("-i"));
++	g_ptr_array_add(args, g_strdup("/etc/barebox-state.dtb"));
+ 	g_ptr_array_add(args, NULL);
+ 
+ 	sub = g_subprocess_newv((const gchar * const *)args->pdata,
+-- 
+2.7.4
+

buildroot-external/board/raspberrypi/amber/config.txt

@@ -0,0 +1,77 @@
+# For more options and information see
+# http://rpf.io/configtxt
+# Some settings may impact device functionality. See link above for details
+
+# HAOS - don't change it!
+disable_splash=1
+kernel=u-boot.bin
+arm_64bit=1
+
+# uncomment to enable primary UART console
+enable_uart=1
+
+# uncomment if you get no picture on HDMI for a default "safe" mode
+#hdmi_safe=1
+
+# uncomment this if your display has a black border of unused pixels visible
+# and your display can output without overscan
+#disable_overscan=1
+
+# uncomment the following to adjust overscan. Use positive numbers if console
+# goes off screen, and negative if there is too much border
+#overscan_left=16
+#overscan_right=16
+#overscan_top=16
+#overscan_bottom=16
+
+# uncomment to force a console size. By default it will be display's size minus
+# overscan.
+#framebuffer_width=1280
+#framebuffer_height=720
+
+# uncomment if hdmi display is not detected and composite is being output
+#hdmi_force_hotplug=1
+
+# uncomment to force a specific HDMI mode (this will force VGA)
+#hdmi_group=1
+#hdmi_mode=1
+
+# uncomment to force a HDMI mode rather than DVI. This can make audio work in
+# DMT (computer monitor) modes
+#hdmi_drive=2
+
+# uncomment to increase signal to HDMI, if you have interference, blanking, or
+# no display
+#config_hdmi_boost=4
+
+# uncomment for composite PAL
+#sdtv_mode=2
+
+# Uncomment to disable continous SD-card poll (for USB SSD)
+#dtparam=sd_poll_once=on
+
+# Uncomment some or all of these to enable the optional hardware interfaces
+#dtparam=i2c_arm=on
+#dtparam=i2s=on
+#dtparam=spi=on
+
+# Uncomment this to enable the lirc-rpi module
+#dtoverlay=lirc-rpi
+
+# Uncomment this to enable GPIO support for RPI-RF-MOD/HM-MOD-RPI-PCB
+#enable_uart=1
+#dtparam=i2c_arm=on
+#dtoverlay=miniuart-bt
+#dtoverlay=rpi-rf-mod
+
+# Additional overlays and parameters are documented /boot/overlays/README
+
+# Enable audio (loads snd_bcm2835)
+dtparam=audio=on
+
+[all]
+#dtoverlay=vc4-fkms-v3d
+#max_framebuffers=2
+device_tree=bcm2711-rpi-cm4-ha-amber.dtb
+dtoverlay=dwc2,dr_mode=host
+

buildroot-external/board/raspberrypi/amber/meta

@@ -1,5 +1,5 @@
-BOARD_ID=yellow
-BOARD_NAME="Yellow"
+BOARD_ID=amber
+BOARD_NAME="Amber"
 CHASSIS=embedded
 BOOTLOADER=uboot
 KERNEL_FILE=Image

buildroot-external/board/raspberrypi/amber/patches/linux/0001-ARM-dts-bcm2711-Add-device-tree-for-Home-Assistant-A.patch

@@ -1,58 +1,72 @@
-From 2d3d8c091bc692999a1c519c1dc1570cc8be2358 Mon Sep 17 00:00:00 2001
-Message-Id: <2d3d8c091bc692999a1c519c1dc1570cc8be2358.1651085802.git.stefan@agner.ch>
+From fa42d0ece205b3c2a8a06dac3e4436400cf59978 Mon Sep 17 00:00:00 2001
+Message-Id: <fa42d0ece205b3c2a8a06dac3e4436400cf59978.1635895105.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
-Date: Mon, 11 Apr 2022 14:47:59 +0200
-Subject: [PATCH 01/10] ARM: dts: bcm2711: Add device tree for Home Assistant
- Yellow
+Date: Wed, 3 Nov 2021 00:00:45 +0100
+Subject: [PATCH 1/7] ARM: dts: bcm2711: Add device tree for Home Assistant
+ Amber
 
-Add device tree for Home Assistant Yellow, a Compute Module 4 based I/O
+Add device tree for Home Assistant Amber, a Compute Module 4 based I/O
 board.
 
 Signed-off-by: Stefan Agner <stefan@agner.ch>
 ---
  arch/arm/boot/dts/Makefile                    |   3 +-
- .../boot/dts/bcm2711-rpi-cm4-ha-yellow.dts    | 598 ++++++++++++++++++
+ .../arm/boot/dts/bcm2711-rpi-cm4-ha-amber.dts | 659 ++++++++++++++++++
  arch/arm64/boot/dts/broadcom/Makefile         |   1 +
- .../broadcom/bcm2711-rpi-cm4-ha-yellow.dts    |   1 +
- 4 files changed, 602 insertions(+), 1 deletion(-)
- create mode 100644 arch/arm/boot/dts/bcm2711-rpi-cm4-ha-yellow.dts
- create mode 100644 arch/arm64/boot/dts/broadcom/bcm2711-rpi-cm4-ha-yellow.dts
+ .../dts/broadcom/bcm2711-rpi-cm4-ha-amber.dts |   1 +
+ 4 files changed, 663 insertions(+), 1 deletion(-)
+ create mode 100644 arch/arm/boot/dts/bcm2711-rpi-cm4-ha-amber.dts
+ create mode 100644 arch/arm64/boot/dts/broadcom/bcm2711-rpi-cm4-ha-amber.dts
 
 diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
-index f9acf5c4a59b..fb5b4555d42e 100644
+index 12cd8bf582e1..4fa8c7be516a 100644
 --- a/arch/arm/boot/dts/Makefile
 +++ b/arch/arm/boot/dts/Makefile
-@@ -17,7 +17,8 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
+@@ -14,7 +14,8 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
+ 	bcm2711-rpi-4-b.dtb \
  	bcm2711-rpi-400.dtb \
  	bcm2710-rpi-cm3.dtb \
- 	bcm2711-rpi-cm4.dtb \
--	bcm2711-rpi-cm4s.dtb
-+	bcm2711-rpi-cm4s.dtb \
-+	bcm2711-rpi-cm4-ha-yellow.dtb
+-	bcm2711-rpi-cm4.dtb
++	bcm2711-rpi-cm4.dtb \
++	bcm2711-rpi-cm4-ha-amber.dtb
  
  dtb-$(CONFIG_ARCH_ALPINE) += \
  	alpine-db.dtb
-diff --git a/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-yellow.dts b/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-yellow.dts
+diff --git a/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-amber.dts b/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-amber.dts
 new file mode 100644
-index 000000000000..61d8c81d3de4
+index 000000000000..855da2b029a4
 --- /dev/null
-+++ b/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-yellow.dts
-@@ -0,0 +1,598 @@
++++ b/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-amber.dts
+@@ -0,0 +1,659 @@
 +// SPDX-License-Identifier: GPL-2.0
 +/dts-v1/;
 +#include "bcm2711.dtsi"
-+#include "bcm2711-rpi.dtsi"
-+//#include "bcm283x-rpi-usb-peripheral.dtsi"
++#include "bcm2835-rpi.dtsi"
++
++#include <dt-bindings/reset/raspberrypi,firmware-reset.h>
 +
 +/ {
-+	compatible = "raspberrypi,4-compute-module-ha-yellow", "raspberrypi,4-compute-module", "brcm,bcm2711";
-+	model = "Raspberry Pi Compute Module 4 on Home Assistant Yellow";
++	compatible = "raspberrypi,4-compute-module-ha-amber", "brcm,bcm2711";
++	model = "Raspberry Pi Compute Module 4 on Home Assistant Amber";
 +
 +	chosen {
 +		/* 8250 auxiliary UART instead of pl011 */
 +		stdout-path = "serial1:115200n8";
 +	};
 +
++	/* Will be filled by the bootloader */
++	memory@0 {
++		device_type = "memory";
++		reg = <0 0 0>;
++	};
++
++	aliases {
++		emmc2bus = &emmc2bus;
++		ethernet0 = &genet;
++		pcie0 = &pcie0;
++		blconfig = &blconfig;
++	};
++
 +	leds {
 +		led-act {
 +			gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
@@ -80,8 +94,8 @@ index 000000000000..61d8c81d3de4
 +		regulator-always-on;
 +		regulator-settling-time-us = <5000>;
 +		gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>;
-+		states = <1800000 0x1>,
-+			 <3300000 0x0>;
++		states = <1800000 0x1
++			  3300000 0x0>;
 +		status = "okay";
 +	};
 +
@@ -104,26 +118,42 @@ index 000000000000..61d8c81d3de4
 +	status = "okay";
 +};
 +
-+&expgpio {
-+	gpio-line-names = "BT_ON",
-+			  "WL_ON",
-+			  "PWR_LED_OFF",
-+			  "ANT1",
-+			  "VDD_SD_IO_SEL",
-+			  "CAM_GPIO",
-+			  "SD_PWR_ON",
-+			  "ANT2";
-+
-+	ant1: ant1 {
-+		gpio-hog;
-+		gpios = <3 GPIO_ACTIVE_HIGH>;
-+		output-high;
++&firmware {
++	firmware_clocks: clocks {
++		compatible = "raspberrypi,firmware-clocks";
++		#clock-cells = <1>;
 +	};
 +
-+	ant2: ant2 {
-+		gpio-hog;
-+		gpios = <7 GPIO_ACTIVE_HIGH>;
-+		output-low;
++	expgpio: gpio {
++		compatible = "raspberrypi,firmware-gpio";
++		gpio-controller;
++		#gpio-cells = <2>;
++		gpio-line-names = "BT_ON",
++				  "WL_ON",
++				  "PWR_LED_OFF",
++				  "ANT1",
++				  "VDD_SD_IO_SEL",
++				  "CAM_GPIO",
++				  "SD_PWR_ON",
++				  "ANT2";
++		status = "okay";
++
++		ant1: ant1 {
++			gpio-hog;
++			gpios = <3 GPIO_ACTIVE_HIGH>;
++			output-high;
++		};
++
++		ant2: ant2 {
++			gpio-hog;
++			gpios = <7 GPIO_ACTIVE_HIGH>;
++			output-low;
++		};
++	};
++
++	reset: reset {
++		compatible = "raspberrypi,firmware-reset";
++		#reset-cells = <1>;
 +	};
 +};
 +
@@ -201,13 +231,23 @@ index 000000000000..61d8c81d3de4
 +};
 +
 +&hdmi0 {
++	clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 0>, <&clk_27MHz>;
++	clock-names = "hdmi", "bvb", "audio", "cec";
++	wifi-2.4ghz-coexistence;
 +	status = "okay";
 +};
 +
 +&hdmi1 {
++	clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>;
++	clock-names = "hdmi", "bvb", "audio", "cec";
++	wifi-2.4ghz-coexistence;
 +	status = "okay";
 +};
 +
++&hvs {
++	clocks = <&firmware_clocks 4>;
++};
++
 +&pixelvalve0 {
 +	status = "okay";
 +};
@@ -230,6 +270,22 @@ index 000000000000..61d8c81d3de4
 +	status = "okay";
 +};
 +
++&rmem {
++	/*
++	 * RPi4's co-processor will copy the board's bootloader configuration
++	 * into memory for the OS to consume. It'll also update this node with
++	 * its placement information.
++	 */
++	blconfig: nvram@0 {
++		compatible = "raspberrypi,bootloader-config", "nvmem-rmem";
++		#address-cells = <1>;
++		#size-cells = <1>;
++		reg = <0x0 0x0 0x0>;
++		no-map;
++		status = "disabled";
++	};
++};
++
 +/* SDHCI is used to control the SDIO for wireless */
 +&sdhci {
 +	#address-cells = <1>;
@@ -270,13 +326,17 @@ index 000000000000..61d8c81d3de4
 +};
 +
 +&pcie0 {
-+	pci@0,0 {
-+		device-type = "pci";
++	pci@1,0 {
 +		#address-cells = <3>;
 +		#size-cells = <2>;
 +		ranges;
 +
 +		reg = <0 0 0 0 0>;
++
++		usb@1,0 {
++			reg = <0x10000 0 0 0 0>;
++			resets = <&reset RASPBERRYPI_FIRMWARE_RESET_ID_USB>;
++		};
 +	};
 +};
 +
@@ -328,10 +388,11 @@ index 000000000000..61d8c81d3de4
 +	};
 +};
 +
-+#include "bcm2711-rpi-ds.dtsi"
++#include "bcm2711-rpi.dtsi"
 +#include "bcm283x-rpi-csi0-2lane.dtsi"
 +#include "bcm283x-rpi-csi1-4lane.dtsi"
 +#include "bcm283x-rpi-i2c0mux_0_44.dtsi"
++#include "bcm283x-rpi-cam1-regulator.dtsi"
 +
 +/ {
 +	chosen {
@@ -637,24 +698,24 @@ index 000000000000..61d8c81d3de4
 +	};
 +};
 diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile
-index 8eadc747ae1f..786dfe43d804 100644
+index 69809bf2f45d..aef509d06d14 100644
 --- a/arch/arm64/boot/dts/broadcom/Makefile
 +++ b/arch/arm64/boot/dts/broadcom/Makefile
-@@ -13,6 +13,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-4-b.dtb
+@@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-4-b.dtb
  dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-400.dtb
  dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-cm3.dtb
  dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-cm4.dtb
-+dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-cm4-ha-yellow.dtb
++dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-cm4-ha-amber.dtb
  
- subdir-y	+= bcm4908
  subdir-y	+= northstar2
-diff --git a/arch/arm64/boot/dts/broadcom/bcm2711-rpi-cm4-ha-yellow.dts b/arch/arm64/boot/dts/broadcom/bcm2711-rpi-cm4-ha-yellow.dts
+ subdir-y	+= stingray
+diff --git a/arch/arm64/boot/dts/broadcom/bcm2711-rpi-cm4-ha-amber.dts b/arch/arm64/boot/dts/broadcom/bcm2711-rpi-cm4-ha-amber.dts
 new file mode 100644
-index 000000000000..fdc5ec5bc956
+index 000000000000..728975338bf0
 --- /dev/null
-+++ b/arch/arm64/boot/dts/broadcom/bcm2711-rpi-cm4-ha-yellow.dts
++++ b/arch/arm64/boot/dts/broadcom/bcm2711-rpi-cm4-ha-amber.dts
 @@ -0,0 +1 @@
-+#include "../../../../arm/boot/dts/bcm2711-rpi-cm4-ha-yellow.dts"
++#include "../../../../arm/boot/dts/bcm2711-rpi-cm4-ha-amber.dts"
 -- 
-2.36.0
+2.33.1
 

buildroot-external/board/raspberrypi/amber/patches/linux/0002-ARM-dts-bcm2711-amber-Mux-UART4-for-SiLabs-radio-mod.patch

@@ -0,0 +1,58 @@
+From 60125e49aff88c430ebc6b8702aaf3867f529b75 Mon Sep 17 00:00:00 2001
+Message-Id: <60125e49aff88c430ebc6b8702aaf3867f529b75.1635895105.git.stefan@agner.ch>
+In-Reply-To: <fa42d0ece205b3c2a8a06dac3e4436400cf59978.1635895105.git.stefan@agner.ch>
+References: <fa42d0ece205b3c2a8a06dac3e4436400cf59978.1635895105.git.stefan@agner.ch>
+From: Stefan Agner <stefan@agner.ch>
+Date: Thu, 4 Mar 2021 14:33:09 +0100
+Subject: [PATCH 2/7] ARM: dts: bcm2711: amber: Mux UART4 for SiLabs radio
+ module
+
+Enable UART4 by default and mux pins including hardware flow control.
+
+Signed-off-by: Stefan Agner <stefan@agner.ch>
+---
+ arch/arm/boot/dts/bcm2711-rpi-cm4-ha-amber.dts | 13 +++++++++++--
+ 1 file changed, 11 insertions(+), 2 deletions(-)
+
+diff --git a/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-amber.dts b/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-amber.dts
+index 855da2b029a4..ba4116cdffc4 100644
+--- a/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-amber.dts
++++ b/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-amber.dts
+@@ -21,6 +21,7 @@ memory@0 {
+ 	};
+ 
+ 	aliases {
++		serial4 = &uart4;
+ 		emmc2bus = &emmc2bus;
+ 		ethernet0 = &genet;
+ 		pcie0 = &pcie0;
+@@ -321,6 +322,14 @@ &uart1 {
+ 	status = "okay";
+ };
+ 
++/* uart4 for Zigbee */
++&uart4 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&uart4_pins>;
++	uart-has-rtscts;
++	status = "okay";
++};
++
+ &vchiq {
+ 	interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ };
+@@ -549,9 +558,9 @@ uart3_pins: uart3_pins {
+ 	};
+ 
+ 	uart4_pins: uart4_pins {
+-		brcm,pins = <8 9>;
++		brcm,pins = <8 9 10 11>;
+ 		brcm,function = <BCM2835_FSEL_ALT4>;
+-		brcm,pull = <0 2>;
++		brcm,pull = <0 2 2 0>;
+ 	};
+ 
+ 	uart5_pins: uart5_pins {
+-- 
+2.33.1
+

buildroot-external/board/raspberrypi/amber/patches/linux/0003-ARM-dts-bcm2711-amber-Mux-debug-UART5.patch

@@ -0,0 +1,50 @@
+From 1e395219026ad0575483aecc9d49992099e73e8b Mon Sep 17 00:00:00 2001
+Message-Id: <1e395219026ad0575483aecc9d49992099e73e8b.1635895105.git.stefan@agner.ch>
+In-Reply-To: <fa42d0ece205b3c2a8a06dac3e4436400cf59978.1635895105.git.stefan@agner.ch>
+References: <fa42d0ece205b3c2a8a06dac3e4436400cf59978.1635895105.git.stefan@agner.ch>
+From: Stefan Agner <stefan@agner.ch>
+Date: Thu, 4 Mar 2021 14:44:23 +0100
+Subject: [PATCH 3/7] ARM: dts: bcm2711: amber: Mux debug UART5
+
+Signed-off-by: Stefan Agner <stefan@agner.ch>
+---
+ arch/arm/boot/dts/bcm2711-rpi-cm4-ha-amber.dts | 9 +++++++++
+ 1 file changed, 9 insertions(+)
+
+diff --git a/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-amber.dts b/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-amber.dts
+index ba4116cdffc4..4c2fe964eb72 100644
+--- a/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-amber.dts
++++ b/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-amber.dts
+@@ -22,6 +22,7 @@ memory@0 {
+ 
+ 	aliases {
+ 		serial4 = &uart4;
++		serial5 = &uart5;
+ 		emmc2bus = &emmc2bus;
+ 		ethernet0 = &genet;
+ 		pcie0 = &pcie0;
+@@ -330,6 +331,13 @@ &uart4 {
+ 	status = "okay";
+ };
+ 
++/* uart5 default Debug UART */
++&uart5 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&uart5_pins>;
++	status = "okay";
++};
++
+ &vchiq {
+ 	interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ };
+@@ -366,6 +374,7 @@ soc {
+ / {
+ 	chosen {
+ 		bootargs = "coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1";
++		stdout-path = "serial5:115200n8";
+ 	};
+ 
+ 	aliases {
+-- 
+2.33.1
+

buildroot-external/board/raspberrypi/amber/patches/linux/0004-ARM-dts-bcm2711-amber-Enable-I2C6-by-default.patch

@@ -0,0 +1,35 @@
+From 071423b3beab53facdc69b7c945f82a907825f80 Mon Sep 17 00:00:00 2001
+Message-Id: <071423b3beab53facdc69b7c945f82a907825f80.1635895105.git.stefan@agner.ch>
+In-Reply-To: <fa42d0ece205b3c2a8a06dac3e4436400cf59978.1635895105.git.stefan@agner.ch>
+References: <fa42d0ece205b3c2a8a06dac3e4436400cf59978.1635895105.git.stefan@agner.ch>
+From: Stefan Agner <stefan@agner.ch>
+Date: Thu, 4 Mar 2021 14:48:48 +0100
+Subject: [PATCH 4/7] ARM: dts: bcm2711: amber: Enable I2C6 by default
+
+The main I2C bus used on Amber is I2C6. Enable it by default.
+
+Signed-off-by: Stefan Agner <stefan@agner.ch>
+---
+ arch/arm/boot/dts/bcm2711-rpi-cm4-ha-amber.dts | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+diff --git a/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-amber.dts b/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-amber.dts
+index 4c2fe964eb72..a95c3f96044a 100644
+--- a/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-amber.dts
++++ b/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-amber.dts
+@@ -589,6 +589,12 @@ &i2c1 {
+ 	clock-frequency = <100000>;
+ };
+ 
++&i2c6 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&i2c6_pins>;
++	status = "okay";
++};
++
+ &i2s {
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&i2s_pins>;
+-- 
+2.33.1
+

buildroot-external/board/raspberrypi/amber/patches/linux/0005-ARM-dts-bcm2711-amber-add-I2S-audio-codec.patch

@@ -1,23 +1,23 @@
-From 298d5254c1c2151b34eaf87f7e2f44205d34d909 Mon Sep 17 00:00:00 2001
-Message-Id: <298d5254c1c2151b34eaf87f7e2f44205d34d909.1651085802.git.stefan@agner.ch>
-In-Reply-To: <2d3d8c091bc692999a1c519c1dc1570cc8be2358.1651085802.git.stefan@agner.ch>
-References: <2d3d8c091bc692999a1c519c1dc1570cc8be2358.1651085802.git.stefan@agner.ch>
+From 3fa8a55b7fd515f0ffe8b000be23080003ed5ac4 Mon Sep 17 00:00:00 2001
+Message-Id: <3fa8a55b7fd515f0ffe8b000be23080003ed5ac4.1635895105.git.stefan@agner.ch>
+In-Reply-To: <fa42d0ece205b3c2a8a06dac3e4436400cf59978.1635895105.git.stefan@agner.ch>
+References: <fa42d0ece205b3c2a8a06dac3e4436400cf59978.1635895105.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Thu, 4 Mar 2021 17:19:01 +0100
-Subject: [PATCH 05/10] ARM: dts: bcm2711: yellow: add I2S audio codec
+Subject: [PATCH 5/7] ARM: dts: bcm2711: amber: add I2S audio codec
 
 Add TI PCM5122 I2S audio codec.
 
 Signed-off-by: Stefan Agner <stefan@agner.ch>
 ---
- .../boot/dts/bcm2711-rpi-cm4-ha-yellow.dts    | 26 +++++++++++++++++++
+ .../arm/boot/dts/bcm2711-rpi-cm4-ha-amber.dts | 26 +++++++++++++++++++
  1 file changed, 26 insertions(+)
 
-diff --git a/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-yellow.dts b/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-yellow.dts
-index 0bdbfdd44aed..f6f42bf45c92 100644
---- a/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-yellow.dts
-+++ b/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-yellow.dts
-@@ -535,11 +535,22 @@ &i2c6 {
+diff --git a/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-amber.dts b/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-amber.dts
+index a95c3f96044a..637ce01618d8 100644
+--- a/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-amber.dts
++++ b/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-amber.dts
+@@ -593,11 +593,22 @@ &i2c6 {
  	pinctrl-names = "default";
  	pinctrl-0 = <&i2c6_pins>;
  	status = "okay";
@@ -40,14 +40,14 @@ index 0bdbfdd44aed..f6f42bf45c92 100644
  };
  
  // =============================================
-@@ -582,6 +593,21 @@ &pwm1 {
+@@ -640,6 +651,21 @@ &pwm1 {
  	status = "disabled";
  };
  
 +&sound {
 +	compatible = "simple-audio-card";
 +	simple-audio-card,format = "i2s";
-+	simple-audio-card,name = "pcm5121-sound";
++	simple-audio-card,name = "pcm5521-sound";
 +	status = "okay";
 +
 +	simple-audio-card,cpu {
@@ -63,5 +63,5 @@ index 0bdbfdd44aed..f6f42bf45c92 100644
  	pinctrl-names = "default";
  	pinctrl-0 = <&audio_pins>;
 -- 
-2.36.0
+2.33.1
 

buildroot-external/board/raspberrypi/amber/patches/linux/0006-ARM-dts-bcm2711-amber-enable-GPIO-keys.patch

@@ -0,0 +1,71 @@
+From 7e2f95935408ec5b1d7a2b63daaef7fdb01d642c Mon Sep 17 00:00:00 2001
+Message-Id: <7e2f95935408ec5b1d7a2b63daaef7fdb01d642c.1635895105.git.stefan@agner.ch>
+In-Reply-To: <fa42d0ece205b3c2a8a06dac3e4436400cf59978.1635895105.git.stefan@agner.ch>
+References: <fa42d0ece205b3c2a8a06dac3e4436400cf59978.1635895105.git.stefan@agner.ch>
+From: Stefan Agner <stefan@agner.ch>
+Date: Tue, 9 Mar 2021 15:02:53 +0100
+Subject: [PATCH 6/7] ARM: dts: bcm2711: amber: enable GPIO keys
+
+Signed-off-by: Stefan Agner <stefan@agner.ch>
+---
+ .../arm/boot/dts/bcm2711-rpi-cm4-ha-amber.dts | 30 +++++++++++++++++++
+ 1 file changed, 30 insertions(+)
+
+diff --git a/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-amber.dts b/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-amber.dts
+index 637ce01618d8..a2cbb8510491 100644
+--- a/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-amber.dts
++++ b/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-amber.dts
+@@ -2,6 +2,7 @@
+ /dts-v1/;
+ #include "bcm2711.dtsi"
+ #include "bcm2835-rpi.dtsi"
++#include <dt-bindings/input/input.h>
+ 
+ #include <dt-bindings/reset/raspberrypi,firmware-reset.h>
+ 
+@@ -29,6 +30,29 @@ aliases {
+ 		blconfig = &blconfig;
+ 	};
+ 
++	keys: gpio-keys {
++		compatible = "gpio-keys";
++
++		pinctrl-names = "default";
++		pinctrl-0 = <&gpio_button_pins>;
++
++		status = "okay";
++
++		power {
++			label = "Power Button";
++			linux,code = <KEY_POWER>;
++			gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
++			debounce-interval = <100>; // ms
++		};
++
++		user {
++			label = "User Button";
++			linux,code = <KEY_MACRO>;
++			gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
++			debounce-interval = <100>; // ms
++		};
++	};
++
+ 	leds {
+ 		led-act {
+ 			gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
+@@ -438,6 +462,12 @@ spidev1: spidev@1{
+ };
+ 
+ &gpio {
++	gpio_button_pins: gpio_button_pins {
++		brcm,pins = <26 27>;
++		brcm,function = <BCM2835_FSEL_GPIO_IN>;
++		brcm,pull = <BCM2835_PUD_UP>;
++	};
++
+ 	spi0_pins: spi0_pins {
+ 		brcm,pins = <9 10 11>;
+ 		brcm,function = <BCM2835_FSEL_ALT0>;
+-- 
+2.33.1
+

buildroot-external/board/raspberrypi/amber/patches/linux/0007-ARM-dts-bcm2711-amber-add-user-LED.patch

@@ -0,0 +1,35 @@
+From c9b6a336142c18892a1b617e8e1460ddd89a0991 Mon Sep 17 00:00:00 2001
+Message-Id: <c9b6a336142c18892a1b617e8e1460ddd89a0991.1635895105.git.stefan@agner.ch>
+In-Reply-To: <fa42d0ece205b3c2a8a06dac3e4436400cf59978.1635895105.git.stefan@agner.ch>
+References: <fa42d0ece205b3c2a8a06dac3e4436400cf59978.1635895105.git.stefan@agner.ch>
+From: Stefan Agner <stefan@agner.ch>
+Date: Thu, 28 Oct 2021 19:38:04 +0200
+Subject: [PATCH 7/7] ARM: dts: bcm2711: amber: add user LED
+
+Add yellow user LED.
+
+Signed-off-by: Stefan Agner <stefan@agner.ch>
+---
+ arch/arm/boot/dts/bcm2711-rpi-cm4-ha-amber.dts | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+diff --git a/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-amber.dts b/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-amber.dts
+index a2cbb8510491..a80a50de399e 100644
+--- a/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-amber.dts
++++ b/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-amber.dts
+@@ -675,6 +675,12 @@ pwr_led: led-pwr {
+ 		linux,default-trigger = "default-on";
+ 		gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+ 	};
++
++	user_led: led-user {
++		label = "led2";
++		linux,default-trigger = "heartbeat";
++		gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
++	};
+ };
+ 
+ &pwm1 {
+-- 
+2.33.1
+

buildroot-external/board/raspberrypi/cmdline.txt

@@ -1 +1 @@
-dwc_otg.lpm_enable=0 console=tty1 usb-storage.quirks=174c:55aa:u,2109:0715:u,152d:0578:u,152d:0579:u,152d:1561:u,174c:0829:u,14b0:0206:u,174c:55aa:u
+dwc_otg.lpm_enable=0 console=tty1

buildroot-external/board/raspberrypi/kernel.config

@@ -4,7 +4,3 @@
 
 CONFIG_NVME_CORE=y
 CONFIG_BLK_DEV_NVME=y
-
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_DISK=y
-CONFIG_LEDS_TRIGGER_ACTIVITY=y

buildroot-external/board/raspberrypi/patches/uboot/0001-rpi-Use-CONFIG_OF_BOARD-instead-of-CONFIG_EMBED.patch

@@ -1,8 +1,8 @@
-From 24b77460dbfa2497ceb7a1611bf28b6eb88a1d74 Mon Sep 17 00:00:00 2001
-Message-Id: <24b77460dbfa2497ceb7a1611bf28b6eb88a1d74.1645627172.git.stefan@agner.ch>
+From d7ec084799b394cc02395829dc97019c8834e944 Mon Sep 17 00:00:00 2001
+Message-Id: <d7ec084799b394cc02395829dc97019c8834e944.1633601057.git.stefan@agner.ch>
 From: Pascal Vizeli <pvizeli@syshack.ch>
 Date: Tue, 10 Dec 2019 09:48:46 +0000
-Subject: [PATCH 1/5] rpi: Use CONFIG_OF_BOARD instead of CONFIG_EMBED
+Subject: [PATCH 01/10] rpi: Use CONFIG_OF_BOARD instead of CONFIG_EMBED
 
 Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch>
 ---
@@ -14,10 +14,10 @@ Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch>
  5 files changed, 5 insertions(+), 5 deletions(-)
 
 diff --git a/configs/rpi_0_w_defconfig b/configs/rpi_0_w_defconfig
-index 6d76d12910..ebc2be002f 100644
+index d17e102052..e5cd7d4913 100644
 --- a/configs/rpi_0_w_defconfig
 +++ b/configs/rpi_0_w_defconfig
-@@ -18,7 +18,7 @@ CONFIG_CMD_GPIO=y
+@@ -17,7 +17,7 @@ CONFIG_CMD_GPIO=y
  CONFIG_CMD_MMC=y
  CONFIG_CMD_USB=y
  CONFIG_CMD_FS_UUID=y
@@ -27,10 +27,10 @@ index 6d76d12910..ebc2be002f 100644
  CONFIG_SYS_RELOC_GD_ENV_ADDR=y
  CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 diff --git a/configs/rpi_2_defconfig b/configs/rpi_2_defconfig
-index 1931607132..164562cd57 100644
+index 8b8affb777..8bda6e6aa9 100644
 --- a/configs/rpi_2_defconfig
 +++ b/configs/rpi_2_defconfig
-@@ -19,7 +19,7 @@ CONFIG_CMD_GPIO=y
+@@ -17,7 +17,7 @@ CONFIG_CMD_GPIO=y
  CONFIG_CMD_MMC=y
  CONFIG_CMD_USB=y
  CONFIG_CMD_FS_UUID=y
@@ -40,44 +40,44 @@ index 1931607132..164562cd57 100644
  CONFIG_SYS_RELOC_GD_ENV_ADDR=y
  CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 diff --git a/configs/rpi_3_32b_defconfig b/configs/rpi_3_32b_defconfig
-index 060fd36da5..78448bbbfe 100644
+index b867b7fa7b..370495c9e4 100644
 --- a/configs/rpi_3_32b_defconfig
 +++ b/configs/rpi_3_32b_defconfig
-@@ -20,7 +20,7 @@ CONFIG_CMD_GPIO=y
- CONFIG_CMD_MMC=y
- CONFIG_CMD_USB=y
- CONFIG_CMD_FS_UUID=y
--CONFIG_OF_EMBED=y
-+CONFIG_OF_BOARD=y
- CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
- CONFIG_SYS_RELOC_GD_ENV_ADDR=y
- CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
-diff --git a/configs/rpi_3_defconfig b/configs/rpi_3_defconfig
-index 8016fe1d55..b49dd9af98 100644
---- a/configs/rpi_3_defconfig
-+++ b/configs/rpi_3_defconfig
-@@ -19,7 +19,7 @@ CONFIG_CMD_GPIO=y
- CONFIG_CMD_MMC=y
- CONFIG_CMD_USB=y
- CONFIG_CMD_FS_UUID=y
--CONFIG_OF_EMBED=y
-+CONFIG_OF_BOARD=y
- CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
- CONFIG_SYS_RELOC_GD_ENV_ADDR=y
- CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
-diff --git a/configs/rpi_defconfig b/configs/rpi_defconfig
-index 8acf04d0e4..5d5e700224 100644
---- a/configs/rpi_defconfig
-+++ b/configs/rpi_defconfig
 @@ -18,7 +18,7 @@ CONFIG_CMD_GPIO=y
  CONFIG_CMD_MMC=y
  CONFIG_CMD_USB=y
  CONFIG_CMD_FS_UUID=y
 -CONFIG_OF_EMBED=y
++CONFIG_OF_BOARD=y
+ CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
+ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+diff --git a/configs/rpi_3_defconfig b/configs/rpi_3_defconfig
+index 3cebd657da..bb0a7ebcd5 100644
+--- a/configs/rpi_3_defconfig
++++ b/configs/rpi_3_defconfig
+@@ -18,7 +18,7 @@ CONFIG_CMD_GPIO=y
+ CONFIG_CMD_MMC=y
+ CONFIG_CMD_USB=y
+ CONFIG_CMD_FS_UUID=y
+-CONFIG_OF_EMBED=y
++CONFIG_OF_BOARD=y
+ CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
+ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+diff --git a/configs/rpi_defconfig b/configs/rpi_defconfig
+index af2189b8fe..f6517eb52a 100644
+--- a/configs/rpi_defconfig
++++ b/configs/rpi_defconfig
+@@ -17,7 +17,7 @@ CONFIG_CMD_GPIO=y
+ CONFIG_CMD_MMC=y
+ CONFIG_CMD_USB=y
+ CONFIG_CMD_FS_UUID=y
+-CONFIG_OF_EMBED=y
 +CONFIG_OF_BOARD=y
  CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
  CONFIG_SYS_RELOC_GD_ENV_ADDR=y
  CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 -- 
-2.35.1
+2.33.0
 

buildroot-external/board/raspberrypi/patches/uboot/0002-usb-xhci-reset-endpoint-on-USB-stall.patch

@@ -1,10 +1,10 @@
-From c942eb452c1c31fe6259178b6e9fea5456d7fb9c Mon Sep 17 00:00:00 2001
-Message-Id: <c942eb452c1c31fe6259178b6e9fea5456d7fb9c.1645627172.git.stefan@agner.ch>
-In-Reply-To: <24b77460dbfa2497ceb7a1611bf28b6eb88a1d74.1645627172.git.stefan@agner.ch>
-References: <24b77460dbfa2497ceb7a1611bf28b6eb88a1d74.1645627172.git.stefan@agner.ch>
+From 3d471d3be58ccd899d29bf57ad669e7a51d0b47d Mon Sep 17 00:00:00 2001
+Message-Id: <3d471d3be58ccd899d29bf57ad669e7a51d0b47d.1633601057.git.stefan@agner.ch>
+In-Reply-To: <d7ec084799b394cc02395829dc97019c8834e944.1633601057.git.stefan@agner.ch>
+References: <d7ec084799b394cc02395829dc97019c8834e944.1633601057.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Mon, 27 Sep 2021 12:28:04 +0200
-Subject: [PATCH 2/5] usb: xhci: reset endpoint on USB stall
+Subject: [PATCH 02/10] usb: xhci: reset endpoint on USB stall
 
 There are devices which cause a USB stall when trying to read strings.
 Specifically Arduino Mega R3 stalls when trying to read the product
@@ -83,5 +83,5 @@ index 35bd5cd29e..430823cb9d 100644
  	/* Invalidate buffer to make it available to usb-core */
  	if (length > 0)
 -- 
-2.35.1
+2.33.0
 

buildroot-external/board/raspberrypi/patches/uboot/0003-rpi-add-NVMe-to-boot-order.patch

@@ -1,10 +1,10 @@
-From ae45864457182fcaa67911e1e3d8db242dff3646 Mon Sep 17 00:00:00 2001
-Message-Id: <ae45864457182fcaa67911e1e3d8db242dff3646.1645627172.git.stefan@agner.ch>
-In-Reply-To: <24b77460dbfa2497ceb7a1611bf28b6eb88a1d74.1645627172.git.stefan@agner.ch>
-References: <24b77460dbfa2497ceb7a1611bf28b6eb88a1d74.1645627172.git.stefan@agner.ch>
+From 698fc7c39fb3265ccb9cc7f3bb08432b76f3cdf5 Mon Sep 17 00:00:00 2001
+Message-Id: <698fc7c39fb3265ccb9cc7f3bb08432b76f3cdf5.1633601057.git.stefan@agner.ch>
+In-Reply-To: <d7ec084799b394cc02395829dc97019c8834e944.1633601057.git.stefan@agner.ch>
+References: <d7ec084799b394cc02395829dc97019c8834e944.1633601057.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Tue, 29 Dec 2020 23:34:52 +0100
-Subject: [PATCH 3/5] rpi: add NVMe to boot order
+Subject: [PATCH 03/10] rpi: add NVMe to boot order
 
 The Compute Module 4 I/O Board can support a NVMe. Add NVMe to the boot
 order.
@@ -15,10 +15,10 @@ Signed-off-by: Stefan Agner <stefan@agner.ch>
  1 file changed, 7 insertions(+)
 
 diff --git a/include/configs/rpi.h b/include/configs/rpi.h
-index 4c5c1ac31f..e24c94c7d2 100644
+index 522b41c02d..9b46203b5b 100644
 --- a/include/configs/rpi.h
 +++ b/include/configs/rpi.h
-@@ -143,6 +143,12 @@
+@@ -169,6 +169,12 @@
  	#define BOOT_TARGET_MMC(func)
  #endif
  
@@ -31,7 +31,7 @@ index 4c5c1ac31f..e24c94c7d2 100644
  #if CONFIG_IS_ENABLED(CMD_USB)
  	#define BOOT_TARGET_USB(func) func(USB, usb, 0)
  #else
-@@ -163,6 +169,7 @@
+@@ -189,6 +195,7 @@
  
  #define BOOT_TARGET_DEVICES(func) \
  	BOOT_TARGET_MMC(func) \
@@ -40,5 +40,5 @@ index 4c5c1ac31f..e24c94c7d2 100644
  	BOOT_TARGET_PXE(func) \
  	BOOT_TARGET_DHCP(func)
 -- 
-2.35.1
+2.33.0
 

buildroot-external/board/raspberrypi/patches/uboot/0004-Revert-nvme-Correct-the-prps-per-page-calculation-me.patch

@@ -1,10 +1,10 @@
-From 3a13ff4eb509e8e80a52ae45c9a5573e745803c3 Mon Sep 17 00:00:00 2001
-Message-Id: <3a13ff4eb509e8e80a52ae45c9a5573e745803c3.1645627172.git.stefan@agner.ch>
-In-Reply-To: <24b77460dbfa2497ceb7a1611bf28b6eb88a1d74.1645627172.git.stefan@agner.ch>
-References: <24b77460dbfa2497ceb7a1611bf28b6eb88a1d74.1645627172.git.stefan@agner.ch>
+From fdacde2c24e052938cbb54d15dabc541304d8f40 Mon Sep 17 00:00:00 2001
+Message-Id: <fdacde2c24e052938cbb54d15dabc541304d8f40.1633601057.git.stefan@agner.ch>
+In-Reply-To: <d7ec084799b394cc02395829dc97019c8834e944.1633601057.git.stefan@agner.ch>
+References: <d7ec084799b394cc02395829dc97019c8834e944.1633601057.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Thu, 23 Sep 2021 23:43:31 +0200
-Subject: [PATCH 4/5] Revert "nvme: Correct the prps per page calculation
+Subject: [PATCH 04/10] Revert "nvme: Correct the prps per page calculation
  method"
 
 This reverts commit 859b33c948945f7904f60a2c12a3792d356d51ad.
@@ -27,7 +27,7 @@ Cc: Wesley Sheng <wesleyshenggit@sina.com>
  1 file changed, 1 insertion(+), 1 deletion(-)
 
 diff --git a/drivers/nvme/nvme.c b/drivers/nvme/nvme.c
-index 3c529a2fce..3bda491e12 100644
+index f6465ea7f4..1ae3001a90 100644
 --- a/drivers/nvme/nvme.c
 +++ b/drivers/nvme/nvme.c
 @@ -81,7 +81,7 @@ static int nvme_setup_prps(struct nvme_dev *dev, u64 *prp2,
@@ -40,5 +40,5 @@ index 3c529a2fce..3bda491e12 100644
  
  	length -= (page_size - offset);
 -- 
-2.35.1
+2.33.0
 

buildroot-external/board/raspberrypi/patches/uboot/0005-nvme-improve-readability-of-nvme_setup_prps.patch

@@ -1,10 +1,10 @@
-From 78924e9cf8c4af0baafcb2e7224bf04ad65276de Mon Sep 17 00:00:00 2001
-Message-Id: <78924e9cf8c4af0baafcb2e7224bf04ad65276de.1650924333.git.stefan@agner.ch>
-In-Reply-To: <78704bc154d695ee16fdf8396f4d60b740190014.1650924333.git.stefan@agner.ch>
-References: <78704bc154d695ee16fdf8396f4d60b740190014.1650924333.git.stefan@agner.ch>
+From d7a7036c90d0f65c8345b9f75ac1e817c48c998f Mon Sep 17 00:00:00 2001
+Message-Id: <d7a7036c90d0f65c8345b9f75ac1e817c48c998f.1633601057.git.stefan@agner.ch>
+In-Reply-To: <d7ec084799b394cc02395829dc97019c8834e944.1633601057.git.stefan@agner.ch>
+References: <d7ec084799b394cc02395829dc97019c8834e944.1633601057.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Thu, 23 Sep 2021 23:52:44 +0200
-Subject: [PATCH 3/5] nvme: improve readability of nvme_setup_prps()
+Subject: [PATCH 05/10] nvme: improve readability of nvme_setup_prps()
 
 Improve readability by introducing consts, reuse consts where
 appropriate and adding variables with discriptive name.
@@ -15,7 +15,7 @@ Signed-off-by: Stefan Agner <stefan@agner.ch>
  1 file changed, 5 insertions(+), 5 deletions(-)
 
 diff --git a/drivers/nvme/nvme.c b/drivers/nvme/nvme.c
-index 3bda491e12..1601651449 100644
+index 1ae3001a90..677e66b1bb 100644
 --- a/drivers/nvme/nvme.c
 +++ b/drivers/nvme/nvme.c
 @@ -76,12 +76,12 @@ static int nvme_wait_ready(struct nvme_dev *dev, bool enabled)
@@ -47,5 +47,5 @@ index 3bda491e12..1601651449 100644
  			prp_pool += page_size;
  		}
 -- 
-2.36.0
+2.33.0
 

buildroot-external/board/raspberrypi/patches/uboot/0006-nvme-Use-pointer-for-CPU-addressed-buffers.patch

@@ -1,10 +1,10 @@
-From e040d976ecbdd8071bbcb73d78e17ababa88c51f Mon Sep 17 00:00:00 2001
-Message-Id: <e040d976ecbdd8071bbcb73d78e17ababa88c51f.1650924333.git.stefan@agner.ch>
-In-Reply-To: <78704bc154d695ee16fdf8396f4d60b740190014.1650924333.git.stefan@agner.ch>
-References: <78704bc154d695ee16fdf8396f4d60b740190014.1650924333.git.stefan@agner.ch>
+From 27a4d59876323a0e13807ac3614b01700b8cfe83 Mon Sep 17 00:00:00 2001
+Message-Id: <27a4d59876323a0e13807ac3614b01700b8cfe83.1633601057.git.stefan@agner.ch>
+In-Reply-To: <d7ec084799b394cc02395829dc97019c8834e944.1633601057.git.stefan@agner.ch>
+References: <d7ec084799b394cc02395829dc97019c8834e944.1633601057.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Thu, 23 Sep 2021 23:58:35 +0200
-Subject: [PATCH 4/5] nvme: Use pointer for CPU addressed buffers
+Subject: [PATCH 06/10] nvme: Use pointer for CPU addressed buffers
 
 Pass buffers which use CPU addressing as void pointers. This aligns with
 DMA APIs which use void pointers as argument. It will avoid unnecessary
@@ -18,7 +18,7 @@ Signed-off-by: Stefan Agner <stefan@agner.ch>
  3 files changed, 33 insertions(+), 33 deletions(-)
 
 diff --git a/drivers/nvme/nvme.c b/drivers/nvme/nvme.c
-index 1601651449..6ab94ada7e 100644
+index 677e66b1bb..4c4dc7cc4d 100644
 --- a/drivers/nvme/nvme.c
 +++ b/drivers/nvme/nvme.c
 @@ -74,11 +74,11 @@ static int nvme_wait_ready(struct nvme_dev *dev, bool enabled)
@@ -168,16 +168,16 @@ index 1601651449..6ab94ada7e 100644
  		free(id);
  		return -EIO;
  	}
-@@ -743,7 +743,7 @@ static ulong nvme_blk_rw(struct udevice *udev, lbaint_t blknr,
- 	u64 prp2;
- 	u64 total_len = blkcnt << desc->log2blksz;
- 	u64 temp_len = total_len;
--	uintptr_t temp_buffer = (uintptr_t)buffer;
-+	void *temp_buffer = buffer;
+@@ -770,7 +770,7 @@ static ulong nvme_blk_rw(struct udevice *udev, lbaint_t blknr,
+ 		}
  
- 	u64 slba = blknr;
- 	u16 lbas = 1 << (dev->max_transfer_shift - ns->lba_shift);
-@@ -890,7 +890,7 @@ static int nvme_probe(struct udevice *udev)
+ 		if (nvme_setup_prps(dev, &prp2,
+-				    lbas << ns->lba_shift, (ulong)buffer))
++				    lbas << ns->lba_shift, buffer))
+ 			return -EIO;
+ 		c.rw.slba = cpu_to_le64(slba);
+ 		slba += lbas;
+@@ -889,7 +889,7 @@ static int nvme_probe(struct udevice *udev)
  		char name[20];
  
  		memset(id, 0, sizeof(*id));
@@ -259,5 +259,5 @@ index 2cdf8ce320..8ff823cd81 100644
  /**
   * nvme_scan_namespace - scan all namespaces attached to NVMe controllers
 -- 
-2.36.0
+2.33.0
 

buildroot-external/board/raspberrypi/patches/uboot/0007-nvme-translate-virtual-addresses-into-the-bus-s-addr.patch

@@ -1,11 +1,11 @@
-From c4736c35141e519d15430660e17c274e142e886d Mon Sep 17 00:00:00 2001
-Message-Id: <c4736c35141e519d15430660e17c274e142e886d.1650924333.git.stefan@agner.ch>
-In-Reply-To: <78704bc154d695ee16fdf8396f4d60b740190014.1650924333.git.stefan@agner.ch>
-References: <78704bc154d695ee16fdf8396f4d60b740190014.1650924333.git.stefan@agner.ch>
+From bdaf8f67fd33ae1d38011a2b6f9da4884ec11dd2 Mon Sep 17 00:00:00 2001
+Message-Id: <bdaf8f67fd33ae1d38011a2b6f9da4884ec11dd2.1633601057.git.stefan@agner.ch>
+In-Reply-To: <d7ec084799b394cc02395829dc97019c8834e944.1633601057.git.stefan@agner.ch>
+References: <d7ec084799b394cc02395829dc97019c8834e944.1633601057.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Fri, 24 Sep 2021 00:27:39 +0200
-Subject: [PATCH 5/5] nvme: translate virtual addresses into the bus's address
- space
+Subject: [PATCH 07/10] nvme: translate virtual addresses into the bus's
+ address space
 
 So far we've been content with passing physical/CPU addresses when
 configuring memory addresses into NVMe controllers, but not all
@@ -23,13 +23,16 @@ commit 1a474559d90a ("xhci: translate virtual addresses into the bus's
 address space").
 
 Signed-off-by: Stefan Agner <stefan@agner.ch>
+Series-to: bmeng.cn@gmail.com
+Series-cc: u-boot@lists.denx.de, nsaenz@kernel.org, m.szyprowski@samsung.com, mbrugger@suse.com, s.nawrocki@samsung.com
+Series-prefix: RFC
 ---
  drivers/nvme/nvme.c | 32 ++++++++++++++++++--------------
  drivers/nvme/nvme.h | 15 +++++++++++++++
  2 files changed, 33 insertions(+), 14 deletions(-)
 
 diff --git a/drivers/nvme/nvme.c b/drivers/nvme/nvme.c
-index 6ab94ada7e..dd190bd654 100644
+index 4c4dc7cc4d..0b7082d71b 100644
 --- a/drivers/nvme/nvme.c
 +++ b/drivers/nvme/nvme.c
 @@ -95,7 +95,7 @@ static int nvme_setup_prps(struct nvme_dev *dev, u64 *prp2,
@@ -136,16 +139,16 @@ index 6ab94ada7e..dd190bd654 100644
  	c.features.fid = cpu_to_le32(fid);
  	c.features.dword11 = cpu_to_le32(dword11);
  
-@@ -776,7 +779,7 @@ static ulong nvme_blk_rw(struct udevice *udev, lbaint_t blknr,
+@@ -775,7 +778,7 @@ static ulong nvme_blk_rw(struct udevice *udev, lbaint_t blknr,
  		c.rw.slba = cpu_to_le64(slba);
  		slba += lbas;
  		c.rw.length = cpu_to_le16(lbas - 1);
--		c.rw.prp1 = cpu_to_le64(temp_buffer);
-+		c.rw.prp1 = cpu_to_le64(nvme_virt_to_bus(dev, temp_buffer));
+-		c.rw.prp1 = cpu_to_le64((ulong)buffer);
++		c.rw.prp1 = cpu_to_le64(nvme_virt_to_bus(dev, buffer));
  		c.rw.prp2 = cpu_to_le64(prp2);
  		status = nvme_submit_sync_cmd(dev->queues[NVME_IO_Q],
  				&c, NULL, IO_TIMEOUT);
-@@ -835,6 +838,7 @@ static int nvme_probe(struct udevice *udev)
+@@ -834,6 +837,7 @@ static int nvme_probe(struct udevice *udev)
  	struct nvme_id_ns *id;
  
  	ndev->instance = trailing_strtol(udev->name);
@@ -194,5 +197,5 @@ index c6aae4da5d..31e6899bca 100644
 +
  #endif /* __DRIVER_NVME_H__ */
 -- 
-2.36.0
+2.33.0
 

buildroot-external/board/raspberrypi/patches/uboot/0008-nvme-invalidate-correct-memory-range-after-read.patch

@@ -0,0 +1,57 @@
+From e55ccb4af869726b9579596ad37f3e7f33b5332d Mon Sep 17 00:00:00 2001
+Message-Id: <e55ccb4af869726b9579596ad37f3e7f33b5332d.1633601057.git.stefan@agner.ch>
+In-Reply-To: <d7ec084799b394cc02395829dc97019c8834e944.1633601057.git.stefan@agner.ch>
+References: <d7ec084799b394cc02395829dc97019c8834e944.1633601057.git.stefan@agner.ch>
+From: Stefan Agner <stefan@agner.ch>
+Date: Tue, 28 Sep 2021 00:52:51 +0200
+Subject: [PATCH 08/10] nvme: invalidate correct memory range after read
+
+The current code invalidates the range after the read buffer since the
+buffer pointer gets incremented in the read loop. Use a temporary
+pointer to make sure we have a pristine pointer to invalidate the
+correct memory range after read.
+
+Fixes: 704e040a51d2 ("nvme: Apply cache operations on the DMA buffers")
+Signed-off-by: Stefan Agner <stefan@agner.ch>
+---
+ drivers/nvme/nvme.c | 7 ++++---
+ 1 file changed, 4 insertions(+), 3 deletions(-)
+
+diff --git a/drivers/nvme/nvme.c b/drivers/nvme/nvme.c
+index 0b7082d71b..dd190bd654 100644
+--- a/drivers/nvme/nvme.c
++++ b/drivers/nvme/nvme.c
+@@ -746,6 +746,7 @@ static ulong nvme_blk_rw(struct udevice *udev, lbaint_t blknr,
+ 	u64 prp2;
+ 	u64 total_len = blkcnt << desc->log2blksz;
+ 	u64 temp_len = total_len;
++	void *temp_buffer = buffer;
+ 
+ 	u64 slba = blknr;
+ 	u16 lbas = 1 << (dev->max_transfer_shift - ns->lba_shift);
+@@ -773,19 +774,19 @@ static ulong nvme_blk_rw(struct udevice *udev, lbaint_t blknr,
+ 		}
+ 
+ 		if (nvme_setup_prps(dev, &prp2,
+-				    lbas << ns->lba_shift, buffer))
++				    lbas << ns->lba_shift, temp_buffer))
+ 			return -EIO;
+ 		c.rw.slba = cpu_to_le64(slba);
+ 		slba += lbas;
+ 		c.rw.length = cpu_to_le16(lbas - 1);
+-		c.rw.prp1 = cpu_to_le64(nvme_virt_to_bus(dev, buffer));
++		c.rw.prp1 = cpu_to_le64(nvme_virt_to_bus(dev, temp_buffer));
+ 		c.rw.prp2 = cpu_to_le64(prp2);
+ 		status = nvme_submit_sync_cmd(dev->queues[NVME_IO_Q],
+ 				&c, NULL, IO_TIMEOUT);
+ 		if (status)
+ 			break;
+ 		temp_len -= (u32)lbas << ns->lba_shift;
+-		buffer += lbas << ns->lba_shift;
++		temp_buffer += lbas << ns->lba_shift;
+ 	}
+ 
+ 	if (read)
+-- 
+2.33.0
+

buildroot-external/board/raspberrypi/patches/uboot/0009-drivers-usb-host-Include-header-file-needed-for-dev_.patch

@@ -0,0 +1,32 @@
+From 6fc60c237cedf06cb5a1db087e2408a528870e3f Mon Sep 17 00:00:00 2001
+Message-Id: <6fc60c237cedf06cb5a1db087e2408a528870e3f.1633447374.git.stefan@agner.ch>
+In-Reply-To: <d7ec084799b394cc02395829dc97019c8834e944.1633447374.git.stefan@agner.ch>
+References: <d7ec084799b394cc02395829dc97019c8834e944.1633447374.git.stefan@agner.ch>
+From: Stefan Agner <stefan@agner.ch>
+Date: Tue, 5 Oct 2021 17:07:22 +0200
+Subject: [PATCH 9/9] drivers: usb: host: Include header file needed for
+ dev_err
+
+dev_err seems to be moved to different header file. Include
+dm/device_compat.h file to compile properly.
+
+Signed-off-by: Stefan Agner <stefan@agner.ch>
+---
+ drivers/usb/host/xhci-brcm.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/drivers/usb/host/xhci-brcm.c b/drivers/usb/host/xhci-brcm.c
+index 27c4bbfcba..ee3b55242e 100644
+--- a/drivers/usb/host/xhci-brcm.c
++++ b/drivers/usb/host/xhci-brcm.c
+@@ -5,6 +5,7 @@
+ 
+ #include <common.h>
+ #include <dm.h>
++#include <dm/device_compat.h>
+ #include <fdtdec.h>
+ #include <usb.h>
+ #include <asm/io.h>
+-- 
+2.33.0
+

buildroot-external/board/raspberrypi/patches/uboot/0009-usb-xhci-brcm-Include-header-file-needed-for-dev_err.patch

@@ -0,0 +1,32 @@
+From dedd65ecd36cee5610022bbab4a8bf92c2401df9 Mon Sep 17 00:00:00 2001
+Message-Id: <dedd65ecd36cee5610022bbab4a8bf92c2401df9.1633601057.git.stefan@agner.ch>
+In-Reply-To: <d7ec084799b394cc02395829dc97019c8834e944.1633601057.git.stefan@agner.ch>
+References: <d7ec084799b394cc02395829dc97019c8834e944.1633601057.git.stefan@agner.ch>
+From: Stefan Agner <stefan@agner.ch>
+Date: Tue, 5 Oct 2021 17:07:22 +0200
+Subject: [PATCH 09/10] usb: xhci-brcm: Include header file needed for dev_err
+
+dev_err seems to be moved to different header file. Include
+dm/device_compat.h file to compile properly.
+
+Fixes: 69dae8902b16 ("linux/compat.h: Remove redefinition of dev_xxx macros")
+Signed-off-by: Stefan Agner <stefan@agner.ch>
+---
+ drivers/usb/host/xhci-brcm.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/drivers/usb/host/xhci-brcm.c b/drivers/usb/host/xhci-brcm.c
+index 27c4bbfcba..fe17924028 100644
+--- a/drivers/usb/host/xhci-brcm.c
++++ b/drivers/usb/host/xhci-brcm.c
+@@ -8,6 +8,7 @@
+ #include <fdtdec.h>
+ #include <usb.h>
+ #include <asm/io.h>
++#include <dm/device_compat.h>
+ #include <usb/xhci.h>
+ 
+ #define DRD2U3H_XHC_REGS_AXIWRA	0xC08
+-- 
+2.33.0
+

buildroot-external/board/raspberrypi/patches/uboot/0010-usb-xhci-brcm-Make-driver-compatible-with-downstream.patch

@@ -1,10 +1,10 @@
-From b00922ee48987ef91f0ca2aa3a66ad22c6c83d57 Mon Sep 17 00:00:00 2001
-Message-Id: <b00922ee48987ef91f0ca2aa3a66ad22c6c83d57.1645627172.git.stefan@agner.ch>
-In-Reply-To: <24b77460dbfa2497ceb7a1611bf28b6eb88a1d74.1645627172.git.stefan@agner.ch>
-References: <24b77460dbfa2497ceb7a1611bf28b6eb88a1d74.1645627172.git.stefan@agner.ch>
+From 2b09a341c0e7e508565926c1b6f383bdd5259d8b Mon Sep 17 00:00:00 2001
+Message-Id: <2b09a341c0e7e508565926c1b6f383bdd5259d8b.1633601057.git.stefan@agner.ch>
+In-Reply-To: <d7ec084799b394cc02395829dc97019c8834e944.1633601057.git.stefan@agner.ch>
+References: <d7ec084799b394cc02395829dc97019c8834e944.1633601057.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Thu, 7 Oct 2021 12:02:39 +0200
-Subject: [PATCH 5/5] usb: xhci-brcm: Make driver compatible with downstream
+Subject: [PATCH 10/10] usb: xhci-brcm: Make driver compatible with downstream
  device tree
 
 The downstream device tree uses just "generic-xhci" as compatible
@@ -29,5 +29,5 @@ index fe17924028..0c6938187b 100644
  };
  
 -- 
-2.35.1
+2.33.0
 

buildroot-external/board/raspberrypi/yellow/config.txt

@@ -1,35 +0,0 @@
-# For more options and information see
-# http://rpf.io/configtxt
-# Some settings may impact device functionality. See link above for details
-
-# HAOS - don't change it!
-disable_splash=1
-kernel=u-boot.bin
-arm_64bit=1
-
-# uncomment to enable primary UART console
-enable_uart=1
-
-# No HDMI on Yellow, but we can't set to 16 since we need the full firmware
-# for codecs
-gpu_mem=32
-
-# Uncomment some or all of these to enable the optional hardware interfaces
-#dtparam=i2c_arm=on
-#dtparam=i2s=on
-#dtparam=spi=on
-
-# Uncomment this to enable the lirc-rpi module
-#dtoverlay=lirc-rpi
-
-# Uncomment this to enable GPIO support for RPI-RF-MOD/HM-MOD-RPI-PCB
-#enable_uart=1
-#dtparam=i2c_arm=on
-#dtoverlay=miniuart-bt
-#dtoverlay=rpi-rf-mod
-
-# Additional overlays and parameters are documented /boot/overlays/README
-
-[all]
-device_tree=bcm2711-rpi-cm4-ha-yellow.dtb
-

buildroot-external/board/raspberrypi/yellow/patches/linux/0002-ARM-dts-bcm2711-yellow-Mux-UART4-for-SiLabs-radio-mo.patch

@@ -1,61 +0,0 @@
-From a4a63bb6f6789c00762b92f0469d10bac525d1f9 Mon Sep 17 00:00:00 2001
-Message-Id: <a4a63bb6f6789c00762b92f0469d10bac525d1f9.1651085802.git.stefan@agner.ch>
-In-Reply-To: <2d3d8c091bc692999a1c519c1dc1570cc8be2358.1651085802.git.stefan@agner.ch>
-References: <2d3d8c091bc692999a1c519c1dc1570cc8be2358.1651085802.git.stefan@agner.ch>
-From: Stefan Agner <stefan@agner.ch>
-Date: Thu, 4 Mar 2021 14:33:09 +0100
-Subject: [PATCH 02/10] ARM: dts: bcm2711: yellow: Mux UART4 for SiLabs radio
- module
-
-Enable UART4 by default and mux pins including hardware flow control.
-
-Signed-off-by: Stefan Agner <stefan@agner.ch>
----
- arch/arm/boot/dts/bcm2711-rpi-cm4-ha-yellow.dts | 16 ++++++++++++++--
- 1 file changed, 14 insertions(+), 2 deletions(-)
-
-diff --git a/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-yellow.dts b/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-yellow.dts
-index 61d8c81d3de4..8db71876a78c 100644
---- a/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-yellow.dts
-+++ b/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-yellow.dts
-@@ -8,6 +8,10 @@ / {
- 	compatible = "raspberrypi,4-compute-module-ha-yellow", "raspberrypi,4-compute-module", "brcm,bcm2711";
- 	model = "Raspberry Pi Compute Module 4 on Home Assistant Yellow";
- 
-+	aliases {
-+		serial4 = &uart4;
-+	};
-+
- 	chosen {
- 		/* 8250 auxiliary UART instead of pl011 */
- 		stdout-path = "serial1:115200n8";
-@@ -261,6 +265,14 @@ &uart1 {
- 	status = "okay";
- };
- 
-+/* uart4 for Zigbee */
-+&uart4 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&uart4_pins>;
-+	uart-has-rtscts;
-+	status = "okay";
-+};
-+
- &vchiq {
- 	interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
- };
-@@ -488,9 +500,9 @@ uart3_pins: uart3_pins {
- 	};
- 
- 	uart4_pins: uart4_pins {
--		brcm,pins = <8 9>;
-+		brcm,pins = <8 9 10 11>;
- 		brcm,function = <BCM2835_FSEL_ALT4>;
--		brcm,pull = <0 2>;
-+		brcm,pull = <0 2 2 0>;
- 	};
- 
- 	uart5_pins: uart5_pins {
--- 
-2.36.0
-

buildroot-external/board/raspberrypi/yellow/patches/linux/0003-ARM-dts-bcm2711-yellow-Mux-debug-UART5.patch

@@ -1,50 +0,0 @@
-From c0ddd45166d5aa922045da915202540db3ef2dc2 Mon Sep 17 00:00:00 2001
-Message-Id: <c0ddd45166d5aa922045da915202540db3ef2dc2.1651085802.git.stefan@agner.ch>
-In-Reply-To: <2d3d8c091bc692999a1c519c1dc1570cc8be2358.1651085802.git.stefan@agner.ch>
-References: <2d3d8c091bc692999a1c519c1dc1570cc8be2358.1651085802.git.stefan@agner.ch>
-From: Stefan Agner <stefan@agner.ch>
-Date: Thu, 4 Mar 2021 14:44:23 +0100
-Subject: [PATCH 03/10] ARM: dts: bcm2711: yellow: Mux debug UART5
-
-Signed-off-by: Stefan Agner <stefan@agner.ch>
----
- arch/arm/boot/dts/bcm2711-rpi-cm4-ha-yellow.dts | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
-diff --git a/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-yellow.dts b/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-yellow.dts
-index 8db71876a78c..d1dea0a214a6 100644
---- a/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-yellow.dts
-+++ b/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-yellow.dts
-@@ -10,6 +10,7 @@ / {
- 
- 	aliases {
- 		serial4 = &uart4;
-+		serial5 = &uart5;
- 	};
- 
- 	chosen {
-@@ -273,6 +274,13 @@ &uart4 {
- 	status = "okay";
- };
- 
-+/* uart5 default Debug UART */
-+&uart5 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&uart5_pins>;
-+	status = "okay";
-+};
-+
- &vchiq {
- 	interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
- };
-@@ -308,6 +316,7 @@ soc {
- / {
- 	chosen {
- 		bootargs = "coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1";
-+		stdout-path = "serial5:115200n8";
- 	};
- 
- 	aliases {
--- 
-2.36.0
-

buildroot-external/board/raspberrypi/yellow/patches/linux/0004-ARM-dts-bcm2711-yellow-Enable-I2C6-by-default.patch

@@ -1,35 +0,0 @@
-From 606dcdc896ffc18001ad4983d45a2e23cacd040a Mon Sep 17 00:00:00 2001
-Message-Id: <606dcdc896ffc18001ad4983d45a2e23cacd040a.1651085802.git.stefan@agner.ch>
-In-Reply-To: <2d3d8c091bc692999a1c519c1dc1570cc8be2358.1651085802.git.stefan@agner.ch>
-References: <2d3d8c091bc692999a1c519c1dc1570cc8be2358.1651085802.git.stefan@agner.ch>
-From: Stefan Agner <stefan@agner.ch>
-Date: Thu, 4 Mar 2021 14:48:48 +0100
-Subject: [PATCH 04/10] ARM: dts: bcm2711: yellow: Enable I2C6 by default
-
-The main I2C bus used on Yellow is I2C6. Enable it by default.
-
-Signed-off-by: Stefan Agner <stefan@agner.ch>
----
- arch/arm/boot/dts/bcm2711-rpi-cm4-ha-yellow.dts | 6 ++++++
- 1 file changed, 6 insertions(+)
-
-diff --git a/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-yellow.dts b/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-yellow.dts
-index d1dea0a214a6..0bdbfdd44aed 100644
---- a/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-yellow.dts
-+++ b/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-yellow.dts
-@@ -531,6 +531,12 @@ &i2c1 {
- 	clock-frequency = <100000>;
- };
- 
-+&i2c6 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c6_pins>;
-+	status = "okay";
-+};
-+
- &i2s {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&i2s_pins>;
--- 
-2.36.0
-

buildroot-external/board/raspberrypi/yellow/patches/linux/0006-ARM-dts-bcm2711-yellow-enable-GPIO-keys.patch

@@ -1,72 +0,0 @@
-From 41127a02d66d07d0a17e904557899b15a067a692 Mon Sep 17 00:00:00 2001
-Message-Id: <41127a02d66d07d0a17e904557899b15a067a692.1651085802.git.stefan@agner.ch>
-In-Reply-To: <2d3d8c091bc692999a1c519c1dc1570cc8be2358.1651085802.git.stefan@agner.ch>
-References: <2d3d8c091bc692999a1c519c1dc1570cc8be2358.1651085802.git.stefan@agner.ch>
-From: Stefan Agner <stefan@agner.ch>
-Date: Tue, 9 Mar 2021 15:02:53 +0100
-Subject: [PATCH 06/10] ARM: dts: bcm2711: yellow: enable GPIO keys
-
-Signed-off-by: Stefan Agner <stefan@agner.ch>
----
- .../boot/dts/bcm2711-rpi-cm4-ha-yellow.dts    | 31 +++++++++++++++++++
- 1 file changed, 31 insertions(+)
-
-diff --git a/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-yellow.dts b/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-yellow.dts
-index f6f42bf45c92..e2fa42a11cc9 100644
---- a/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-yellow.dts
-+++ b/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-yellow.dts
-@@ -4,6 +4,8 @@
- #include "bcm2711-rpi.dtsi"
- //#include "bcm283x-rpi-usb-peripheral.dtsi"
- 
-+#include <dt-bindings/input/input.h>
-+
- / {
- 	compatible = "raspberrypi,4-compute-module-ha-yellow", "raspberrypi,4-compute-module", "brcm,bcm2711";
- 	model = "Raspberry Pi Compute Module 4 on Home Assistant Yellow";
-@@ -18,6 +20,29 @@ chosen {
- 		stdout-path = "serial1:115200n8";
- 	};
- 
-+	keys: gpio-keys {
-+		compatible = "gpio-keys";
-+
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&gpio_button_pins>;
-+
-+		status = "okay";
-+
-+		power {
-+			label = "Blue Button";
-+			linux,code = <KEY_POWER>;
-+			gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
-+			debounce-interval = <100>; // ms
-+		};
-+
-+		user {
-+			label = "Red Button";
-+			linux,code = <BTN_1>;
-+			gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
-+			debounce-interval = <100>; // ms
-+		};
-+	};
-+
- 	leds {
- 		led-act {
- 			gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
-@@ -380,6 +405,12 @@ spidev1: spidev@1{
- };
- 
- &gpio {
-+	gpio_button_pins: gpio_button_pins {
-+		brcm,pins = <26 27>;
-+		brcm,function = <BCM2835_FSEL_GPIO_IN>;
-+		brcm,pull = <BCM2835_PUD_UP>;
-+	};
-+
- 	spi0_pins: spi0_pins {
- 		brcm,pins = <9 10 11>;
- 		brcm,function = <BCM2835_FSEL_ALT0>;
--- 
-2.36.0
-

buildroot-external/board/raspberrypi/yellow/patches/linux/0007-ARM-dts-bcm2711-yellow-add-user-LED.patch

@@ -1,43 +0,0 @@
-From efe5e827dc0653066ebc9f71de2ccf391a4bb27e Mon Sep 17 00:00:00 2001
-Message-Id: <efe5e827dc0653066ebc9f71de2ccf391a4bb27e.1651085802.git.stefan@agner.ch>
-In-Reply-To: <2d3d8c091bc692999a1c519c1dc1570cc8be2358.1651085802.git.stefan@agner.ch>
-References: <2d3d8c091bc692999a1c519c1dc1570cc8be2358.1651085802.git.stefan@agner.ch>
-From: Stefan Agner <stefan@agner.ch>
-Date: Thu, 28 Oct 2021 19:38:04 +0200
-Subject: [PATCH 07/10] ARM: dts: bcm2711: yellow: add user LED
-
-Add yellow user LED.
-
-Signed-off-by: Stefan Agner <stefan@agner.ch>
----
- arch/arm/boot/dts/bcm2711-rpi-cm4-ha-yellow.dts | 7 ++++++-
- 1 file changed, 6 insertions(+), 1 deletion(-)
-
-diff --git a/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-yellow.dts b/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-yellow.dts
-index e2fa42a11cc9..6039c7894796 100644
---- a/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-yellow.dts
-+++ b/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-yellow.dts
-@@ -336,7 +336,6 @@ soc {
- #include "bcm2711-rpi-ds.dtsi"
- #include "bcm283x-rpi-csi0-2lane.dtsi"
- #include "bcm283x-rpi-csi1-4lane.dtsi"
--#include "bcm283x-rpi-i2c0mux_0_44.dtsi"
- 
- / {
- 	chosen {
-@@ -618,6 +617,12 @@ pwr_led: led-pwr {
- 		linux,default-trigger = "default-on";
- 		gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
- 	};
-+
-+	user_led: led-user {
-+		label = "led2";
-+		linux,default-trigger = "heartbeat";
-+		gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
-+	};
- };
- 
- &pwm1 {
--- 
-2.36.0
-

buildroot-external/board/raspberrypi/yellow/patches/linux/0008-ARM-dts-bcm2711-yellow-add-NXP-PCF85063A-RTC.patch

@@ -1,32 +0,0 @@
-From 31ab383d0803e39e94472eea192e712fcc6e3cd6 Mon Sep 17 00:00:00 2001
-Message-Id: <31ab383d0803e39e94472eea192e712fcc6e3cd6.1651085802.git.stefan@agner.ch>
-In-Reply-To: <2d3d8c091bc692999a1c519c1dc1570cc8be2358.1651085802.git.stefan@agner.ch>
-References: <2d3d8c091bc692999a1c519c1dc1570cc8be2358.1651085802.git.stefan@agner.ch>
-From: Stefan Agner <stefan@agner.ch>
-Date: Fri, 12 Nov 2021 17:33:32 +0100
-Subject: [PATCH 08/10] ARM: dts: bcm2711: yellow: add NXP PCF85063A RTC
-
-Signed-off-by: Stefan Agner <stefan@agner.ch>
----
- arch/arm/boot/dts/bcm2711-rpi-cm4-ha-yellow.dts | 5 +++++
- 1 file changed, 5 insertions(+)
-
-diff --git a/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-yellow.dts b/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-yellow.dts
-index 6039c7894796..f78428ea64f3 100644
---- a/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-yellow.dts
-+++ b/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-yellow.dts
-@@ -575,6 +575,11 @@ card_codec: pcm5121@4c {
- 		CPVDD-supply = <&vdd_3v3_reg>;
- 		status = "okay";
- 	};
-+
-+	pcf85063a: rtc@51 {
-+		compatible = "nxp,pcf85063a";
-+		reg = <0x51>;
-+	};
- };
- 
- &i2s {
--- 
-2.36.0
-

buildroot-external/board/raspberrypi/yellow/patches/linux/0009-ARM-dts-bcm2711-yellow-enable-USB-host-mode-by-defau.patch

@@ -1,40 +0,0 @@
-From f1553f413c8f53694d2f27db5b5c43d19cf1ff4f Mon Sep 17 00:00:00 2001
-Message-Id: <f1553f413c8f53694d2f27db5b5c43d19cf1ff4f.1651085802.git.stefan@agner.ch>
-In-Reply-To: <2d3d8c091bc692999a1c519c1dc1570cc8be2358.1651085802.git.stefan@agner.ch>
-References: <2d3d8c091bc692999a1c519c1dc1570cc8be2358.1651085802.git.stefan@agner.ch>
-From: Stefan Agner <stefan@agner.ch>
-Date: Fri, 7 Jan 2022 17:10:00 +0100
-Subject: [PATCH 09/10] ARM: dts: bcm2711: yellow: enable USB host mode by
- default
-
-The DWC2 controller is disable by default. Enable it since Home
-Assistant Yellow has a USB hub and USB ports connected to it.
-
-Signed-off-by: Stefan Agner <stefan@agner.ch>
----
- arch/arm/boot/dts/bcm2711-rpi-cm4-ha-yellow.dts | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
-diff --git a/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-yellow.dts b/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-yellow.dts
-index f78428ea64f3..711a09441ad0 100644
---- a/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-yellow.dts
-+++ b/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-yellow.dts
-@@ -599,6 +599,15 @@ &sdhost {
- 	status = "disabled";
- };
- 
-+&usb {
-+	compatible = "brcm,bcm2835-usb";
-+	dr_mode = "host";
-+	g-np-tx-fifo-size = <32>;
-+	g-rx-fifo-size = <558>;
-+	g-tx-fifo-size = <512 512 512 512 512 256 256>;
-+	status = "okay";
-+};
-+
- &phy1 {
- 	led-modes = <0x00 0x08>; /* link/activity link */
- };
--- 
-2.36.0
-

buildroot-external/board/raspberrypi/yellow/patches/linux/0010-ARM-dts-bcm2711-yellow-use-generic-activity-trigger-.patch

@@ -1,33 +0,0 @@
-From 6f5e8133651df38d187c05bc27fd8fa25f0216da Mon Sep 17 00:00:00 2001
-Message-Id: <6f5e8133651df38d187c05bc27fd8fa25f0216da.1651085802.git.stefan@agner.ch>
-In-Reply-To: <2d3d8c091bc692999a1c519c1dc1570cc8be2358.1651085802.git.stefan@agner.ch>
-References: <2d3d8c091bc692999a1c519c1dc1570cc8be2358.1651085802.git.stefan@agner.ch>
-From: Stefan Agner <stefan@agner.ch>
-Date: Wed, 27 Apr 2022 20:36:19 +0200
-Subject: [PATCH 10/10] ARM: dts: bcm2711: yellow: use generic activity trigger
- for green LED
-
-Use the generic trigger "activity" for the green LED so that any
-system activity is shown.
-
-Signed-off-by: Stefan Agner <stefan@agner.ch>
----
- arch/arm/boot/dts/bcm2711-rpi-cm4-ha-yellow.dts | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-yellow.dts b/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-yellow.dts
-index 711a09441ad0..f2f4f1a49592 100644
---- a/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-yellow.dts
-+++ b/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-yellow.dts
-@@ -622,7 +622,7 @@ audio_pins: audio_pins {
- &leds {
- 	act_led: led-act {
- 		label = "led0";
--		linux,default-trigger = "mmc0";
-+		linux,default-trigger = "activity";
- 		gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
- 	};
- 
--- 
-2.36.0
-

buildroot-external/board/raspberrypi/yellow/patches/uboot/0001-drivers-bcm283x-don-t-explicitly-disable-init.patch

@@ -1,54 +0,0 @@
-From 78704bc154d695ee16fdf8396f4d60b740190014 Mon Sep 17 00:00:00 2001
-Message-Id: <78704bc154d695ee16fdf8396f4d60b740190014.1650924333.git.stefan@agner.ch>
-From: Stefan Agner <stefan@agner.ch>
-Date: Thu, 14 Apr 2022 12:15:26 +0200
-Subject: [PATCH 1/5] drivers: bcm283x: don't explicitly disable init
-
-It seems that the reason why init doesn't succeed is the lack of clock
-support in U-Boot. Setting the default clock of 48MHz for the PL011
-UARTs makes reinitialization work consistently.
-
-Note that for the first UART the "skip-init" is anyways set in the
-device tree. This will only affect probing of UARTs not enabled by
-firmware.
-
-Signed-off-by: Stefan Agner <stefan@agner.ch>
----
- drivers/serial/serial_bcm283x_pl011.c | 6 ------
- include/configs/rpi.h                 | 3 +++
- 2 files changed, 3 insertions(+), 6 deletions(-)
-
-diff --git a/drivers/serial/serial_bcm283x_pl011.c b/drivers/serial/serial_bcm283x_pl011.c
-index 2d2e970316..182274036c 100644
---- a/drivers/serial/serial_bcm283x_pl011.c
-+++ b/drivers/serial/serial_bcm283x_pl011.c
-@@ -51,12 +51,6 @@ static int bcm283x_pl011_serial_probe(struct udevice *dev)
- 	if (ret)
- 		return ret;
- 
--	/*
--	 * TODO: Reinitialization doesn't always work for now, just skip
--	 *       init always - we know we're already initialized
--	 */
--	plat->skip_init = true;
--
- 	return pl01x_serial_probe(dev);
- }
- 
-diff --git a/include/configs/rpi.h b/include/configs/rpi.h
-index e24c94c7d2..98ba4dc052 100644
---- a/include/configs/rpi.h
-+++ b/include/configs/rpi.h
-@@ -40,6 +40,9 @@
- #define CONFIG_SYS_BOOTM_LEN		SZ_64M
- #endif
- 
-+/* Define PL011 default clock */
-+#define CONFIG_PL011_CLOCK		48000000
-+
- /* Devices */
- /* GPIO */
- #define CONFIG_BCM2835_GPIO
--- 
-2.36.0
-

buildroot-external/board/raspberrypi/yellow/patches/uboot/0002-drivers-bcm283x-allow-to-spawn-any-PL011-UART.patch

@@ -1,68 +0,0 @@
-From c2447aa922068cebd9bbaac45acae3d853abf687 Mon Sep 17 00:00:00 2001
-Message-Id: <c2447aa922068cebd9bbaac45acae3d853abf687.1650924333.git.stefan@agner.ch>
-In-Reply-To: <78704bc154d695ee16fdf8396f4d60b740190014.1650924333.git.stefan@agner.ch>
-References: <78704bc154d695ee16fdf8396f4d60b740190014.1650924333.git.stefan@agner.ch>
-From: Stefan Agner <stefan@agner.ch>
-Date: Thu, 14 Apr 2022 12:18:41 +0200
-Subject: [PATCH 2/5] drivers: bcm283x: allow to spawn any PL011 UART
-
-The current code checks pinmux for the first PL011 only. Raspberry Pi 4
-has multiple PL011 UARTs. This code prevents probing of other UARTs in
-case the first PL011 UART is not active.
-
-Furthermore, U-Boot supports pinmuxing, hence the pins should be muxed
-at this point anyway. Drop the check entirly.
-
-This allows to use other UARTs as stdout paths (e.g. stdout-path =
-"serial5:115200n8").
-
-Signed-off-by: Stefan Agner <stefan@agner.ch>
----
- drivers/serial/serial_bcm283x_pl011.c | 27 ---------------------------
- 1 file changed, 27 deletions(-)
-
-diff --git a/drivers/serial/serial_bcm283x_pl011.c b/drivers/serial/serial_bcm283x_pl011.c
-index 182274036c..98628e1ca4 100644
---- a/drivers/serial/serial_bcm283x_pl011.c
-+++ b/drivers/serial/serial_bcm283x_pl011.c
-@@ -11,37 +11,10 @@
- #include <serial.h>
- #include "serial_pl01x_internal.h"
- 
--/*
-- * Check if this serial device is muxed
-- *
-- * The serial device will only work properly if it has been muxed to the serial
-- * pins by firmware. Check whether that happened here.
-- *
-- * @return true if serial device is muxed, false if not
-- */
--static bool bcm283x_is_serial_muxed(void)
--{
--	int serial_gpio = 15;
--	struct udevice *dev;
--
--	if (uclass_first_device(UCLASS_PINCTRL, &dev) || !dev)
--		return false;
--
--	if (pinctrl_get_gpio_mux(dev, 0, serial_gpio) != BCM2835_GPIO_ALT0)
--		return false;
--
--	return true;
--}
--
- static int bcm283x_pl011_serial_probe(struct udevice *dev)
- {
--	struct pl01x_serial_plat *plat = dev_get_plat(dev);
- 	int ret;
- 
--	/* Don't spawn the device if it's not muxed */
--	if (!bcm283x_is_serial_muxed())
--		return -ENODEV;
--
- 	/*
- 	 * Read the ofdata here rather than in an of_to_plat() method
- 	 * since we need the soc simple-bus to be probed so that the 'ranges'
--- 
-2.36.0
-

buildroot-external/bootloader/barebox-state-efi.dts

@@ -0,0 +1,76 @@
+/dts-v1/;
+/ {
+
+	aliases {
+		state = &state;
+	};
+
+	state: state {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		
+		magic = <0xef98423f>;
+		compatible = "barebox,state";
+		backend = <&backend_state>;
+		backend-type = "raw";
+		backend-stridesize = <4048>;
+
+		bootstate {
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			A {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				remaining_attempts@0 {
+					reg = <0x0 0x4>;
+					type = "uint32";
+					default = <3>;
+				};
+				priority@4 {
+					reg = <0x4 0x4>;
+					type = "uint32";
+					default = <20>;
+				};
+			};
+
+			B {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				remaining_attempts@8 {
+					reg = <0x8 0x4>;
+					type = "uint32";
+					default = <0>;
+				};
+				priority@c {
+					reg = <0xc 0x4>;
+					type = "uint32";
+					default = <10>;
+				};
+			};
+
+			last_chosen@10 {
+				reg = <0x10 0x4>;
+				type = "uint32";
+			};
+		};
+
+		machine_id@14 {
+			reg = <0x14 0x24>;
+			type = "string";
+			default = "";
+		};
+	};
+
+	partitions {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fixed-partitions";
+
+		backend_state: state {
+			partuuid = "33236519-7f32-4dff-8002-3390b62c309d";
+		};
+	};
+
+};
+

buildroot-external/bootloader/barebox.config

@@ -0,0 +1,54 @@
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_CMD_VERSION is not set
+# CONFIG_TIMESTAMP is not set
+
+CONFIG_PROMPT="HAOS-boot:"
+CONFIG_CMDLINE_EDITING=y
+CONFIG_AUTO_COMPLETE=y
+CONFIG_MENU=y
+CONFIG_BOOTM_SHOW_TYPE=y
+CONFIG_BOOTM_OFTREE=y
+CONFIG_FLEXIBLE_BOOTARGS=y
+CONFIG_DEFAULT_COMPRESSION_LZ4=y
+
+# CONFIG_PARTITION_DISK_DOS is not set
+CONFIG_PARTITION_DISK_EFI=y
+# CONFIG_PARTITION_DISK_EFI_GPT_NO_FORCE is not set
+# CONFIG_PARTITION_DISK_EFI_GPT_COMPARE is not set
+
+CONFIG_STATE=y
+CONFIG_STATE_DRV=y
+CONFIG_BOOTCHOOSER=y
+CONFIG_RESET_SOURCE=y
+CONFIG_CMD_BOOT=y
+CONFIG_CMD_RESET=y
+CONFIG_CMD_BOOTCHOOSER=y
+CONFIG_CMD_NV=y
+CONFIG_CMD_EXPORT=y
+CONFIG_CMD_GLOBAL=y
+CONFIG_CMD_BASENAME=y
+CONFIG_CMD_DIRNAME=y
+CONFIG_CMD_READLINK=y
+CONFIG_CMD_GETOPT=y
+CONFIG_CMD_READF=y
+CONFIG_CMD_ECHO_E=y
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_MENUTREE=y
+CONFIG_CMD_TIMEOUT=y
+CONFIG_CMD_OFTREE=y
+CONFIG_CMD_STATE=y
+
+CONFIG_OFTREE=y
+CONFIG_OFTREE_OVERLAY=y
+
+CONFIG_DISK=y
+CONFIG_DISK_WRITE=y
+CONFIG_FS_EXT4=y
+CONFIG_FS_FAT=y
+CONFIG_FS_FAT_WRITE=y
+CONFIG_FS_FAT_LFN=y
+CONFIG_FS_SQUASHFS=y
+CONFIG_SQUASHFS_LZ4=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_LZ4_DECOMPRESS=y
+CONFIG_LZO_DECOMPRESS=y

buildroot-external/bootloader/barebox/bin/init

@@ -0,0 +1,18 @@
+#!/bin/sh
+
+export PATH=/env/bin
+
+# Autostart
+for i in /env/init/*; do
+	. $i
+done
+
+echo "- Hit m for menu or wait for autoboot -"
+timeout -a 1 -s -v key
+
+# Run menu
+if [ "${key}" != "m" ]; then
+    boot
+fi
+
+menutree

buildroot-external/bootloader/barebox/boot/system0

@@ -0,0 +1,8 @@
+#!/bin/sh
+
+global linux.bootargs.dyn.root="root=PARTUUID=8d3d53e3-6d49-4c38-8349-aff6859e82fd rootfstype=squashfs ro"
+
+mkdir -p /mnt/system
+mount /dev/*disk*.hassos-kernel0 /mnt/system
+
+global bootm.image="/mnt/system/bzImage"