Merge pull request #432 from home-assistant/dev

Release 3.3

.github/release-drafter.yml

@@ -4,13 +4,11 @@ categories:
   - title: 'Build'
     label: 'build'
   - title: 'Raspberry Pi'
-    label: 'board/raspberrypi'
+    label: 'board/raspberry'
   - title: 'Open Virtual Appliance'
     label: 'board/ova'
   - title: 'Intel-Nuc'
     label: 'board/intel-nuc'
-  - title: 'Hardkernel'
-    label: 'board/hardkernel'
 template: |
   ## Changes
 

Documentation/boards/ova.md

@@ -4,7 +4,6 @@ Using this VMDK in a virtual machine requires the following:
 
 - Operating system: Other 4.x or later Linux (64-bit)
 - Enabled support for UEFI boot
-- SATA disk controller
 - Minimal of 1GB RAM
 - At least 2x vCPU
 - An assigned network
@@ -15,4 +14,6 @@ Currently, we only publish a VMDK virtual disk, due to issues with our previous
 
 - HyperV
 - VirtualBox
-- VMware
+- VMware
+
+You might need to convert the VMDK into a different format that is accepted by your virtualization platform of choice.

Documentation/boards/raspberrypi.md

@@ -2,7 +2,7 @@
 
 Supported Hardware:
 
-| Device | Board |
+| Device | Board | 
 |--------|-----------|
 | Raspberry Pi A+/B/B+| rpi |
 | Raspberry Pi Zero | rpi |
@@ -21,7 +21,7 @@ For access to terminal over serial console, add `console=ttyAMA0,115200` to `cmd
 
 ## I2C
 
-Add `dtparam=i2c1=on` and `dtparam=i2c_arm=on` to `config.txt`. After that we create a module file on host with [config usb stick][config] or direct into `/etc/modules-load.d`.
+Add `dtparam=i2c1=on` and `dtparam=i2c_arm=on` to `config.txt`. After that we create a module file on host with [config usb stick][config] or direct into `/etc/modules-load.d`. 
 
 rpi-i2c.conf:
 ```
@@ -29,19 +29,6 @@ i2c-dev
 i2c-bcm2708
 ```
 
-## USB Boot
-
-USB mass storage boot is available on Raspberry Pi 3B, 3B+, 3A+, and 2B v1.2.
-To enable USB boot, add `program_usb_boot_mode=1` into `config.txt`. Note that this **permanently** alters the one-time programmable memory of the device.
-
-For more information see [RaspberryPi](https://www.raspberrypi.org/documentation/hardware/raspberrypi/bootmodes/msd.md).
-
-### Caveats
-
-* All bootable SD cards must be removed.
-* Boot time can be significantly longer with USB. This is due to the boot process first attempting to boot from SD card, failing, and resorting to USB.
-* Many USB drives simply do not work for boot. This is likely due to minimal driver support in uboot and will not be fixed. If you can't get it to boot on one drive, try a different brand/model. SanDisk Cruzer drives seem to have a higher rate of issues.
-
 ## Tweaks
 
 If you don't need bluetooth, disabled it with add `dtoverlay=pi3-disable-bt` into `config.txt`.

Documentation/kernel.md

@@ -3,10 +3,10 @@
 
 | Board | Version |
 |-------|---------|
-| Open Virtual Applicance | 4.19.72 |
-| Raspberry Pi | 4.19.71 |
-| Tinker Board | 4.19.72 |
-| Odroid-C2 | 4.19.72 |
-| Odroid-XU4 | 4.19.72 |
-| Orangepi-Prime | 4.19.72 |
-| Intel NUC | 4.19.72 |
+| Open Virtual Applicance | 4.19.56 |
+| Raspberry Pi | 4.19.58 |
+| Tinker Board | 4.19.56 |
+| Odroid-C2 | 4.19.56 |
+| Odroid-XU4 | 4.19.56 |
+| Orangepi-Prime | 4.19.56 |
+| Intel NUC | 4.19.56 |

buildroot-external/board/intel/nuc/kernel.config

@@ -3,6 +3,8 @@ CONFIG_EFI_STUB=y
 CONFIG_SCSI_LOWLEVEL=y
 CONFIG_USB_XHCI_HCD=y
 
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+
 CONFIG_IGB=y
 
 CONFIG_IWLWIFI=m

buildroot-external/board/raspberrypi/hassos-hook.sh

@@ -7,9 +7,11 @@ function hassos_pre_image() {
     cp -t "${BOOT_DATA}" \
         "${BINARIES_DIR}/u-boot.bin" \
         "${BINARIES_DIR}/boot.scr"
-    cp "${BINARIES_DIR}"/*.dtb "${BOOT_DATA}/"
+    cp -t "${BOOT_DATA}" \
+        "${BINARIES_DIR}"/*.dtb \
+        "${BINARIES_DIR}/rpi-firmware/bootcode.bin"
     cp -r "${BINARIES_DIR}/rpi-firmware/overlays" "${BOOT_DATA}/"
-    cp "${BOARD_DIR}/../boot-env.txt" "${BOOT_DATA}/config.txt"
+    cp -f "${BOARD_DIR}/../boot-env.txt" "${BOOT_DATA}/config.txt"
 
     # Firmware
     if [[ "${BOARD_ID}" =~ "rpi4" ]]; then
@@ -19,8 +21,7 @@ function hassos_pre_image() {
     else
         cp -t "${BOOT_DATA}" \
         "${BINARIES_DIR}/rpi-firmware/fixup.dat" \
-        "${BINARIES_DIR}/rpi-firmware/start.elf" \
-        "${BINARIES_DIR}/rpi-firmware/bootcode.bin"
+        "${BINARIES_DIR}/rpi-firmware/start.elf"
     fi
 
     # Set cmd options
@@ -28,7 +29,7 @@ function hassos_pre_image() {
 
     # Enable 64bit support
     if [[ "${BOARD_ID}" =~ "64" ]]; then
-        sed -i "s|#arm_64bit|arm_64bit|g" "${BOOT_DATA}/config.txt"
+        echo "arm_64bit=1" >> "${BOOT_DATA}/config.txt"
     fi
 }
 

buildroot-external/board/raspberrypi/kernel.config

@@ -1,2 +1 @@
-CONFIG_FB_SIMPLE=y
-# CONFIG_FB_BCM2708 is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y

buildroot-external/board/raspberrypi/uboot-boot.ush

@@ -1,16 +1,15 @@
 
-part start ${devtype} ${devnum} 6 dev_env
-${devtype} dev ${devnum}
-
+part start mmc ${devnum} 6 mmc_env
+mmc dev ${devnum}
 setenv loadbootstate " \
     echo 'loading env...'; \
-    ${devtype} read ${ramdisk_addr_r} ${dev_env} 0x20; \
+    mmc read ${ramdisk_addr_r} ${mmc_env} 0x20; \
     env import -c ${ramdisk_addr_r} 0x4000;"
 
 setenv storebootstate " \
     echo 'storing env...'; \
     env export -c -s 0x4000 ${ramdisk_addr_r} BOOT_ORDER BOOT_A_LEFT BOOT_B_LEFT; \
-    ${devtype} write ${ramdisk_addr_r} ${dev_env} 0x20;"
+    mmc write ${ramdisk_addr_r} ${mmc_env} 0x20;"
 
 run loadbootstate
 test -n "${BOOT_ORDER}" || setenv BOOT_ORDER "A B"
@@ -38,14 +37,14 @@ for BOOT_SLOT in "${BOOT_ORDER}"; do
     if test ${BOOT_A_LEFT} -gt 0; then
       setexpr BOOT_A_LEFT ${BOOT_A_LEFT} - 1
       echo "Found valid slot A, ${BOOT_A_LEFT} attempts remaining"
-      setenv load_kernel "ext4load ${devtype} ${devnum}:2 ${kernel_addr_r} zImage"
+      setenv load_kernel "ext4load mmc 0:2 ${kernel_addr_r} zImage"
       setenv bootargs "${bootargs_hassos} ${bootargs_rpi} ${bootargs_a} rauc.slot=A"
     fi
   elif test "x${BOOT_SLOT}" = "xB"; then
     if test ${BOOT_B_LEFT} -gt 0; then
       setexpr BOOT_B_LEFT ${BOOT_B_LEFT} - 1
       echo "Found valid slot B, ${BOOT_B_LEFT} attempts remaining"
-      setenv load_kernel "ext4load ${devtype} ${devnum}:4 ${kernel_addr_r} zImage"
+      setenv load_kernel "ext4load mmc 0:4 ${kernel_addr_r} zImage"
       setenv bootargs "${bootargs_hassos} ${bootargs_rpi} ${bootargs_b} rauc.slot=B"
     fi
   fi

buildroot-external/board/raspberrypi/uboot-boot64.ush

@@ -1,16 +1,15 @@
 
-part start ${devtype} ${devnum} 6 dev_env
-${devtype} dev ${devnum}
-
+part start mmc ${devnum} 6 mmc_env
+mmc dev ${devnum}
 setenv loadbootstate " \
     echo 'loading env...'; \
-    ${devtype} read ${ramdisk_addr_r} ${dev_env} 0x20; \
+    mmc read ${ramdisk_addr_r} ${mmc_env} 0x20; \
     env import -c ${ramdisk_addr_r} 0x4000;"
 
 setenv storebootstate " \
     echo 'storing env...'; \
     env export -c -s 0x4000 ${ramdisk_addr_r} BOOT_ORDER BOOT_A_LEFT BOOT_B_LEFT; \
-    ${devtype} write ${ramdisk_addr_r} ${dev_env} 0x20;"
+    mmc write ${ramdisk_addr_r} ${mmc_env} 0x20;"
 
 run loadbootstate
 test -n "${BOOT_ORDER}" || setenv BOOT_ORDER "A B"
@@ -38,14 +37,14 @@ for BOOT_SLOT in "${BOOT_ORDER}"; do
     if test ${BOOT_A_LEFT} -gt 0; then
       setexpr BOOT_A_LEFT ${BOOT_A_LEFT} - 1
       echo "Found valid slot A, ${BOOT_A_LEFT} attempts remaining"
-      setenv load_kernel "ext4load ${devtype} ${devnum}:2 ${kernel_addr_r} Image"
+      setenv load_kernel "ext4load mmc 0:2 ${kernel_addr_r} Image"
       setenv bootargs "${bootargs_hassos} ${bootargs_rpi} ${bootargs_a} rauc.slot=A"
     fi
   elif test "x${BOOT_SLOT}" = "xB"; then
     if test ${BOOT_B_LEFT} -gt 0; then
       setexpr BOOT_B_LEFT ${BOOT_B_LEFT} - 1
       echo "Found valid slot B, ${BOOT_B_LEFT} attempts remaining"
-      setenv load_kernel "ext4load ${devtype} ${devnum}:4 ${kernel_addr_r} Image"
+      setenv load_kernel "ext4load mmc 0:4 ${kernel_addr_r} Image"
       setenv bootargs "${bootargs_hassos} ${bootargs_rpi} ${bootargs_b} rauc.slot=B"
     fi
   fi

buildroot-external/board/raspberrypi/uboot.config

@@ -2,9 +2,3 @@
 # CONFIG_DOS_PARTITION is not set
 CONFIG_CMD_FILEENV=y
 CONFIG_ENV_IS_NOWHERE=Y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_FUNCTION_MASS_STORAGE=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_GENERIC=y
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set

buildroot-external/configs/intel_nuc_defconfig

@@ -19,7 +19,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/intel/nuc $(BR2_EXTERNAL_HASSOS_PATH)/board/intel/nuc/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.72"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.56"
 BR2_LINUX_KERNEL_DEFCONFIG="x86_64"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/intel/nuc/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
@@ -62,6 +62,7 @@ BR2_PACKAGE_DROPBEAR=y
 # BR2_PACKAGE_DROPBEAR_CLIENT is not set
 # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
 BR2_PACKAGE_NETWORK_MANAGER=y
+BR2_PACKAGE_NETWORK_MANAGER_MODEM_MANAGER=y
 BR2_PACKAGE_TINI=y
 BR2_PACKAGE_DOCKER_ENGINE=y
 BR2_PACKAGE_DOCKER_CLI=y
@@ -94,12 +95,12 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/amd64-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="187"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="169"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/intel-nuc-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/amd64-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="14"
+BR2_PACKAGE_HASSOS_CLI_VERSION="11"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"

buildroot-external/configs/odroid_c2_defconfig

@@ -19,7 +19,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-c2 $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-c2/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.72"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.56"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-c2/kernel.config"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config"
@@ -56,6 +56,7 @@ BR2_PACKAGE_DROPBEAR=y
 # BR2_PACKAGE_DROPBEAR_CLIENT is not set
 # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
 BR2_PACKAGE_NETWORK_MANAGER=y
+BR2_PACKAGE_NETWORK_MANAGER_MODEM_MANAGER=y
 BR2_PACKAGE_TINI=y
 BR2_PACKAGE_DOCKER_ENGINE=y
 BR2_PACKAGE_DOCKER_CLI=y
@@ -88,12 +89,12 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/aarch64-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="187"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="169"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/odroid-c2-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/aarch64-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="14"
+BR2_PACKAGE_HASSOS_CLI_VERSION="11"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"

buildroot-external/configs/odroid_xu4_defconfig

@@ -19,10 +19,14 @@ BR2_ROOTFS_POST_BUILD_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-xu4 $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-xu4/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
+#BR2_LINUX_KERNEL_CUSTOM_GIT=y
+#BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/hardkernel/linux.git"
+#BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="4.14.87-153"
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.72"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.56"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="exynos5422-odroidxu4"
+#BR2_LINUX_KERNEL_DEFCONFIG="odroidxu4"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-xu4/kernel.config"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config"
@@ -59,6 +63,7 @@ BR2_PACKAGE_DROPBEAR=y
 # BR2_PACKAGE_DROPBEAR_CLIENT is not set
 # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
 BR2_PACKAGE_NETWORK_MANAGER=y
+BR2_PACKAGE_NETWORK_MANAGER_MODEM_MANAGER=y
 BR2_PACKAGE_TINI=y
 BR2_PACKAGE_DOCKER_ENGINE=y
 BR2_PACKAGE_DOCKER_CLI=y
@@ -93,12 +98,12 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/armv7-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="187"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="169"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/odroid-xu-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/armv7-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="14"
+BR2_PACKAGE_HASSOS_CLI_VERSION="11"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"

buildroot-external/configs/opi_prime_defconfig

@@ -37,7 +37,7 @@ BR2_TARGET_UBOOT_BOOT_SCRIPT_SOURCE="$(BR2_EXTERNAL_HASSOS_PATH)/board/orangepi/
 BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/bootloader/uboot.config $(BR2_EXTERNAL_HASSOS_PATH)/board/orangepi/prime/uboot.config"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.72"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.56"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-h5-orangepi-prime"
 BR2_LINUX_KERNEL_LZ4=y
@@ -78,6 +78,7 @@ BR2_PACKAGE_DROPBEAR=y
 # BR2_PACKAGE_DROPBEAR_CLIENT is not set
 # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
 BR2_PACKAGE_NETWORK_MANAGER=y
+BR2_PACKAGE_NETWORK_MANAGER_MODEM_MANAGER=y
 BR2_PACKAGE_TINI=y
 BR2_PACKAGE_DOCKER_ENGINE=y
 BR2_PACKAGE_DOCKER_CLI=y
@@ -102,12 +103,12 @@ BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HOST_SWIG=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/aarch64-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="187"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="169"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/orangepi-prime-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/aarch64-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="14"
+BR2_PACKAGE_HASSOS_CLI_VERSION="11"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"

buildroot-external/configs/ova_defconfig

@@ -19,7 +19,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/intel/ova $(BR2_EXTERNAL_HASSOS_PATH)/board/intel/ova/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.72"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.56"
 BR2_LINUX_KERNEL_DEFCONFIG="x86_64"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/intel/ova/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
@@ -52,6 +52,7 @@ BR2_PACKAGE_DROPBEAR=y
 # BR2_PACKAGE_DROPBEAR_CLIENT is not set
 # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
 BR2_PACKAGE_NETWORK_MANAGER=y
+BR2_PACKAGE_NETWORK_MANAGER_MODEM_MANAGER=y
 BR2_PACKAGE_TINI=y
 BR2_PACKAGE_DOCKER_ENGINE=y
 BR2_PACKAGE_DOCKER_CLI=y
@@ -84,12 +85,12 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/amd64-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="187"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="169"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/qemux86-64-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/amd64-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="14"
+BR2_PACKAGE_HASSOS_CLI_VERSION="11"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"

buildroot-external/configs/rpi0_w_defconfig

@@ -22,12 +22,12 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi0-
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
 BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="bd3452c84c206a171fa4cf5f6ddfab5687667228"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="8222f38b1ceadd0642d49812fd34a3a6cb00e264"
 BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2708-rpi-zero-w"
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2708-rpi-0-w"
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
 BR2_LINUX_KERNEL_NEEDS_HOST_LIBELF=y
 BR2_PACKAGE_BUSYBOX_CONFIG="$(BR2_EXTERNAL_HASSOS_PATH)/busybox.config"
@@ -59,6 +59,7 @@ BR2_PACKAGE_DROPBEAR=y
 # BR2_PACKAGE_DROPBEAR_CLIENT is not set
 # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
 BR2_PACKAGE_NETWORK_MANAGER=y
+BR2_PACKAGE_NETWORK_MANAGER_MODEM_MANAGER=y
 BR2_PACKAGE_TINI=y
 BR2_PACKAGE_DOCKER_ENGINE=y
 BR2_PACKAGE_DOCKER_CLI=y
@@ -91,12 +92,12 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/armhf-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="187"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="169"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/raspberrypi-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/armhf-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="14"
+BR2_PACKAGE_HASSOS_CLI_VERSION="11"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"

buildroot-external/configs/rpi2_defconfig

@@ -22,7 +22,7 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi2
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
 BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="bd3452c84c206a171fa4cf5f6ddfab5687667228"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="8222f38b1ceadd0642d49812fd34a3a6cb00e264"
 BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
@@ -58,6 +58,7 @@ BR2_PACKAGE_DROPBEAR=y
 # BR2_PACKAGE_DROPBEAR_CLIENT is not set
 # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
 BR2_PACKAGE_NETWORK_MANAGER=y
+BR2_PACKAGE_NETWORK_MANAGER_MODEM_MANAGER=y
 BR2_PACKAGE_TINI=y
 BR2_PACKAGE_DOCKER_ENGINE=y
 BR2_PACKAGE_DOCKER_CLI=y
@@ -90,12 +91,12 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/armv7-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="187"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="169"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/raspberrypi2-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/armv7-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="14"
+BR2_PACKAGE_HASSOS_CLI_VERSION="11"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"

buildroot-external/configs/rpi3_64_defconfig

@@ -22,7 +22,7 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi3-
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
 BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="bd3452c84c206a171fa4cf5f6ddfab5687667228"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="8222f38b1ceadd0642d49812fd34a3a6cb00e264"
 BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi3"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
@@ -59,6 +59,7 @@ BR2_PACKAGE_DROPBEAR=y
 # BR2_PACKAGE_DROPBEAR_CLIENT is not set
 # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
 BR2_PACKAGE_NETWORK_MANAGER=y
+BR2_PACKAGE_NETWORK_MANAGER_MODEM_MANAGER=y
 BR2_PACKAGE_TINI=y
 BR2_PACKAGE_DOCKER_ENGINE=y
 BR2_PACKAGE_DOCKER_CLI=y
@@ -91,12 +92,12 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/aarch64-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="187"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="169"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/raspberrypi3-64-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/aarch64-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="14"
+BR2_PACKAGE_HASSOS_CLI_VERSION="11"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"

buildroot-external/configs/rpi3_defconfig

@@ -22,7 +22,7 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi3
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
 BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="bd3452c84c206a171fa4cf5f6ddfab5687667228"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="8222f38b1ceadd0642d49812fd34a3a6cb00e264"
 BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
@@ -59,6 +59,7 @@ BR2_PACKAGE_DROPBEAR=y
 # BR2_PACKAGE_DROPBEAR_CLIENT is not set
 # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
 BR2_PACKAGE_NETWORK_MANAGER=y
+BR2_PACKAGE_NETWORK_MANAGER_MODEM_MANAGER=y
 BR2_PACKAGE_TINI=y
 BR2_PACKAGE_DOCKER_ENGINE=y
 BR2_PACKAGE_DOCKER_CLI=y
@@ -91,12 +92,12 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/armv7-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="187"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="169"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/raspberrypi3-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/armv7-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="14"
+BR2_PACKAGE_HASSOS_CLI_VERSION="11"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"

buildroot-external/configs/rpi4_64_defconfig

@@ -22,9 +22,9 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi4-
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
 BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="bd3452c84c206a171fa4cf5f6ddfab5687667228"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="8222f38b1ceadd0642d49812fd34a3a6cb00e264"
 BR2_LINUX_KERNEL_DEFCONFIG="bcm2711"
-BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config"
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="broadcom/bcm2711-rpi-4-b"
@@ -60,6 +60,7 @@ BR2_PACKAGE_DROPBEAR=y
 # BR2_PACKAGE_DROPBEAR_CLIENT is not set
 # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
 BR2_PACKAGE_NETWORK_MANAGER=y
+BR2_PACKAGE_NETWORK_MANAGER_MODEM_MANAGER=y
 BR2_PACKAGE_TINI=y
 BR2_PACKAGE_DOCKER_ENGINE=y
 BR2_PACKAGE_DOCKER_CLI=y
@@ -92,12 +93,12 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/aarch64-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="187"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="169"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/raspberrypi4-64-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/aarch64-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="14"
+BR2_PACKAGE_HASSOS_CLI_VERSION="11"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"

buildroot-external/configs/rpi4_defconfig

@@ -22,9 +22,9 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi4
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
 BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="bd3452c84c206a171fa4cf5f6ddfab5687667228"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="8222f38b1ceadd0642d49812fd34a3a6cb00e264"
 BR2_LINUX_KERNEL_DEFCONFIG="bcm2711"
-BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config"
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2711-rpi-4-b"
@@ -60,6 +60,7 @@ BR2_PACKAGE_DROPBEAR=y
 # BR2_PACKAGE_DROPBEAR_CLIENT is not set
 # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
 BR2_PACKAGE_NETWORK_MANAGER=y
+BR2_PACKAGE_NETWORK_MANAGER_MODEM_MANAGER=y
 BR2_PACKAGE_TINI=y
 BR2_PACKAGE_DOCKER_ENGINE=y
 BR2_PACKAGE_DOCKER_CLI=y
@@ -92,12 +93,12 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/armv7-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="187"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="169"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/raspberrypi4-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/armv7-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="14"
+BR2_PACKAGE_HASSOS_CLI_VERSION="11"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"

buildroot-external/configs/rpi_defconfig

@@ -22,7 +22,7 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi $
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
 BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="bd3452c84c206a171fa4cf5f6ddfab5687667228"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="8222f38b1ceadd0642d49812fd34a3a6cb00e264"
 BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
@@ -58,6 +58,7 @@ BR2_PACKAGE_DROPBEAR=y
 # BR2_PACKAGE_DROPBEAR_CLIENT is not set
 # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
 BR2_PACKAGE_NETWORK_MANAGER=y
+BR2_PACKAGE_NETWORK_MANAGER_MODEM_MANAGER=y
 BR2_PACKAGE_TINI=y
 BR2_PACKAGE_DOCKER_ENGINE=y
 BR2_PACKAGE_DOCKER_CLI=y
@@ -90,12 +91,12 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/armhf-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="187"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="169"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/raspberrypi-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/armhf-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="14"
+BR2_PACKAGE_HASSOS_CLI_VERSION="11"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"

buildroot-external/configs/tinker_defconfig

@@ -21,7 +21,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/asus/tinker $(BR2_EXTERNAL_HASSOS_PATH)/board/asus/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.72"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.56"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(BR2_EXTERNAL_HASSOS_PATH)/board/asus/tinker/kernel.config"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config"
@@ -59,6 +59,7 @@ BR2_PACKAGE_DROPBEAR=y
 # BR2_PACKAGE_DROPBEAR_CLIENT is not set
 # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
 BR2_PACKAGE_NETWORK_MANAGER=y
+BR2_PACKAGE_NETWORK_MANAGER_MODEM_MANAGER=y
 BR2_PACKAGE_TINI=y
 BR2_PACKAGE_DOCKER_ENGINE=y
 BR2_PACKAGE_DOCKER_CLI=y
@@ -95,12 +96,12 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/armv7-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="187"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="169"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/tinker-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/armv7-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="14"
+BR2_PACKAGE_HASSOS_CLI_VERSION="11"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"

buildroot-external/kernel/hassos.config

@@ -4,8 +4,6 @@ CONFIG_CMDLINE=""
 CONFIG_ZRAM=y
 CONFIG_ZSMALLOC=y
 
-CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-
 CONFIG_MISC_FILESYSTEMS=y
 CONFIG_BLOCK=y
 CONFIG_EXT4_FS=y

buildroot-external/meta

@@ -1,7 +1,7 @@
 VERSION_MAJOR=3
-VERSION_BUILD=5
+VERSION_BUILD=3
 
 HASSOS_NAME="HassOS"
 HASSOS_ID="hassos"
 
-DEPLOYMENT="staging"
+DEPLOYMENT="development"

buildroot-external/package/bluetooth-bcm43xx/bluetooth-bcm43xx.mk

@@ -11,8 +11,8 @@ BLUETOOTH_BCM43XX_SITE = $(BR2_EXTERNAL_HASSOS_PATH)/package/bluetooth-bcm43xx
 BLUETOOTH_BCM43XX_SITE_METHOD = local
 
 define BLUETOOTH_BCM43XX_BUILD_CMDS
-	curl -L -o $(@D)/BCM43430A1.hcd https://raw.githubusercontent.com/RPi-Distro/bluez-firmware/96eefffcccc725425fd83be5e0704a5c32b79e54/broadcom/BCM43430A1.hcd
-	curl -L -o $(@D)/BCM4345C0.hcd https://raw.githubusercontent.com/RPi-Distro/bluez-firmware/96eefffcccc725425fd83be5e0704a5c32b79e54/broadcom/BCM4345C0.hcd
+	curl -L -o $(@D)/BCM43430A1.hcd https://raw.githubusercontent.com/RPi-Distro/bluez-firmware/ade2bae1aaaebede09abb8fb546f767a0e4c7804/broadcom/BCM43430A1.hcd
+	curl -L -o $(@D)/BCM4345C0.hcd https://raw.githubusercontent.com/RPi-Distro/bluez-firmware/ade2bae1aaaebede09abb8fb546f767a0e4c7804/broadcom/BCM4345C0.hcd
 endef
 
 define BLUETOOTH_BCM43XX_INSTALL_TARGET_CMDS

buildroot-external/scripts/hdd-image.sh

@@ -91,7 +91,7 @@ function create_kernel_image() {
     # Mount / init file structs
     sudo mkdir -p /mnt/data/
     sudo mount -o loop "${kernel_img}" /mnt/data
-    sudo cp "${kernel}" /mnt/data/
+    sudo cp -f "${kernel}" /mnt/data/
     sudo umount /mnt/data
 }
 

buildroot-patches/0004-rpi-firmware-Bump-firmware-for-kernel-4.19-RPi4.patch

@@ -38,7 +38,7 @@ index 9988dda717..3eae7e270b 100644
 @@ -1,2 +1,2 @@
  # Locally computed
 -sha256	f1d631920ed4ae15f368ba7b8b3caa4ed604f5223372cc6debbd39a101eb8d74  rpi-firmware-81cca1a9380c828299e884dba5efd0d4acb39e8d.tar.gz
-+sha256	e2b4022441b39e5879776e7c7d45037a6feb2c849405cde37b7fd657b4a26a23  rpi-firmware-3bba1909a004fb34d5b01db2c319976f33d8eb1d.tar.gz
++sha256	62a63b4a8be10da779342799148919d1a50c1939bf6cae93d61cb1b5daed810f  rpi-firmware-cba4be275b9943b353ea2e5201ab2badd4c760e9.tar.gz
 diff --git a/package/rpi-firmware/rpi-firmware.mk b/package/rpi-firmware/rpi-firmware.mk
 index 630bc670ca..fd2970333e 100644
 --- a/package/rpi-firmware/rpi-firmware.mk
@@ -48,7 +48,7 @@ index 630bc670ca..fd2970333e 100644
  ################################################################################
  
 -RPI_FIRMWARE_VERSION = 81cca1a9380c828299e884dba5efd0d4acb39e8d
-+RPI_FIRMWARE_VERSION = 3bba1909a004fb34d5b01db2c319976f33d8eb1d
++RPI_FIRMWARE_VERSION = cba4be275b9943b353ea2e5201ab2badd4c760e9
  RPI_FIRMWARE_SITE = $(call github,raspberrypi,firmware,$(RPI_FIRMWARE_VERSION))
  RPI_FIRMWARE_LICENSE = BSD-3-Clause
  RPI_FIRMWARE_LICENSE_FILES = boot/LICENCE.broadcom

buildroot-patches/0007-rpi-use-latest-wifi-driver.patch

@@ -16,7 +16,7 @@ index c61a47e..84e02f3 100644
 @@ -1,3 +1,3 @@
  # Locally calculated
 -sha256 155ebd5f08b819e0ce4e1950fcc972b2086cee3c16d36aba348beba1910c1fd2  rpi-wifi-firmware-8c1e2bff1da9850f68efcfff3da5d939ec27a2ee.tar.gz
-+sha256 0b2bbf0bcdb7eabc488cc96e418ee17efcd9803590abc64d055ea3b762e2411b  rpi-wifi-firmware-130cb86fa30cafbd575d38865fa546350d4c5f9c.tar.gz
++sha256 95d26fadfa73505b1fdcc0080728655109ceef9b5a0e63f36d9383e9ada57ab2  rpi-wifi-firmware-b518de45ced519e8f7a499f4778100173402ae43.tar.gz
  sha256 b16056fc91b82a0e3e8de8f86c2dac98201aa9dc3cbd33e8d38f1b087fcec30d  LICENCE.broadcom_bcm43xx
 diff --git a/package/rpi-wifi-firmware/rpi-wifi-firmware.mk b/package/rpi-wifi-firmware/rpi-wifi-firmware.mk
 index 2eb8cee..da915bd 100644
@@ -28,7 +28,7 @@ index 2eb8cee..da915bd 100644
  
 -RPI_WIFI_FIRMWARE_VERSION = 8c1e2bff1da9850f68efcfff3da5d939ec27a2ee
 -RPI_WIFI_FIRMWARE_SITE = $(call github,LibreELEC,brcmfmac_sdio-firmware-rpi,$(RPI_WIFI_FIRMWARE_VERSION))
-+RPI_WIFI_FIRMWARE_VERSION = 130cb86fa30cafbd575d38865fa546350d4c5f9c
++RPI_WIFI_FIRMWARE_VERSION = b518de45ced519e8f7a499f4778100173402ae43
 +RPI_WIFI_FIRMWARE_SITE = $(call github,RPi-Distro,firmware-nonfree,$(RPI_WIFI_FIRMWARE_VERSION))
  RPI_WIFI_FIRMWARE_LICENSE = PROPRIETARY
  RPI_WIFI_FIRMWARE_LICENSE_FILES = LICENCE.broadcom_bcm43xx

buildroot/package/rpi-firmware/rpi-firmware.hash

@@ -1,2 +1,2 @@
 # Locally computed
-sha256	e2b4022441b39e5879776e7c7d45037a6feb2c849405cde37b7fd657b4a26a23  rpi-firmware-3bba1909a004fb34d5b01db2c319976f33d8eb1d.tar.gz
+sha256	62a63b4a8be10da779342799148919d1a50c1939bf6cae93d61cb1b5daed810f  rpi-firmware-cba4be275b9943b353ea2e5201ab2badd4c760e9.tar.gz

buildroot/package/rpi-firmware/rpi-firmware.mk

@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-RPI_FIRMWARE_VERSION = 3bba1909a004fb34d5b01db2c319976f33d8eb1d
+RPI_FIRMWARE_VERSION = cba4be275b9943b353ea2e5201ab2badd4c760e9
 RPI_FIRMWARE_SITE = $(call github,raspberrypi,firmware,$(RPI_FIRMWARE_VERSION))
 RPI_FIRMWARE_LICENSE = BSD-3-Clause
 RPI_FIRMWARE_LICENSE_FILES = boot/LICENCE.broadcom

buildroot/package/rpi-wifi-firmware/rpi-wifi-firmware.hash

@@ -1,3 +1,3 @@
 # Locally calculated
-sha256 0b2bbf0bcdb7eabc488cc96e418ee17efcd9803590abc64d055ea3b762e2411b  rpi-wifi-firmware-130cb86fa30cafbd575d38865fa546350d4c5f9c.tar.gz
+sha256 95d26fadfa73505b1fdcc0080728655109ceef9b5a0e63f36d9383e9ada57ab2  rpi-wifi-firmware-b518de45ced519e8f7a499f4778100173402ae43.tar.gz
 sha256 b16056fc91b82a0e3e8de8f86c2dac98201aa9dc3cbd33e8d38f1b087fcec30d  LICENCE.broadcom_bcm43xx

buildroot/package/rpi-wifi-firmware/rpi-wifi-firmware.mk

@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-RPI_WIFI_FIRMWARE_VERSION = 130cb86fa30cafbd575d38865fa546350d4c5f9c
+RPI_WIFI_FIRMWARE_VERSION = b518de45ced519e8f7a499f4778100173402ae43
 RPI_WIFI_FIRMWARE_SITE = $(call github,RPi-Distro,firmware-nonfree,$(RPI_WIFI_FIRMWARE_VERSION))
 RPI_WIFI_FIRMWARE_LICENSE = PROPRIETARY
 RPI_WIFI_FIRMWARE_LICENSE_FILES = LICENCE.broadcom_bcm43xx

scripts/enter.sh

@@ -1,11 +1,9 @@
 #!/bin/bash
 BUILDER_UID="$(id -u)"
 BUILDER_GID="$(id -g)"
-CACHE_DIR="${CACHE_DIR:-$HOME/hassos-cache}"
 
-sudo mkdir -p "${CACHE_DIR}"
 sudo docker build -t hassos:local .
 sudo docker run -it --rm --privileged \
-  -v "$(pwd):/build" -v "${CACHE_DIR}:/cache" \
+  -v "$(pwd):/build" -v "${CACHE_DIR:=$HOME/hassos-cache}:/cache" \
   -e BUILDER_UID="${BUILDER_UID}" -e BUILDER_GID="${BUILDER_GID}" \
   hassos:local bash

scripts/entry.sh

@@ -7,7 +7,7 @@ USER="root"
 dockerd -s vfs &> /dev/null &
 
 # Setup local user
-if [ "${BUILDER_UID:-0}" -ne 0 ] && [ "${BUILDER_GID:-0}" -ne 0 ]; then
+if [ "${BUILDER_UID:0}" -ne 0 ] && [ "${BUILDER_GID:0}" -ne 0 ]; then
   groupadd -g "${BUILDER_GID}" builder
   useradd -m -u "${BUILDER_UID}" -g "${BUILDER_GID}" -G docker,sudo builder
   echo "builder ALL=(ALL:ALL) NOPASSWD: ALL" >> /etc/sudoers

scripts/update-cli.sh

@@ -7,4 +7,3 @@ if [ -z "$1" ]; then
 fi
 
 sed -i "s/CLI_VERSION=\".*\"/CLI_VERSION=\"$1\"/g" buildroot-external/configs/*
-git commit -m "OS: Update CLI $1" buildroot-external/configs/*

scripts/update-rpi-kernel.sh

@@ -7,4 +7,3 @@ if [ -z "$1" ]; then
 fi
 
 sed -i "s/BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION=\".*\"/BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION=\"$1\"/g" buildroot-external/configs/rpi*
-git commit -m "RaspberryPi: Update kernel $1" buildroot-external/configs/*

scripts/update-supervisor.sh

@@ -7,5 +7,3 @@ if [ -z "$1" ]; then
 fi
 
 sed -i "s/SUPERVISOR_VERSION=\".*\"/SUPERVISOR_VERSION=\"$1\"/g" buildroot-external/configs/*
-git commit -m "OS: Update supervisor $1" buildroot-external/configs/*
-