Merge branch 'dev' of https://github.com/home-assistant/hassos into dev

OS: Update supervisor 187
Change to RC
2019-09-13 12:13:32 +00:00 · 2019-09-13 12:13:28 +00:00 · 2019-09-13 14:11:53 +02:00 · 2019-09-13 14:08:47 +02:00 · 2019-09-12 15:57:15 +00:00 · 2019-09-12 16:45:44 +02:00
39 changed files with 165 additions and 1224 deletions
--- a/.github/release-drafter.yml
+++ b/.github/release-drafter.yml
@@ -4,11 +4,13 @@ categories:
  - title: 'Build'
    label: 'build'
  - title: 'Raspberry Pi'
-    label: 'board/raspberry'
+    label: 'board/raspberrypi'
  - title: 'Open Virtual Appliance'
    label: 'board/ova'
  - title: 'Intel-Nuc'
    label: 'board/intel-nuc'
+  - title: 'Hardkernel'
+    label: 'board/hardkernel'
 template: |
  ## Changes

--- a/Documentation/boards/ova.md
+++ b/Documentation/boards/ova.md
@@ -4,6 +4,7 @@ Using this VMDK in a virtual machine requires the following:

 - Operating system: Other 4.x or later Linux (64-bit)
 - Enabled support for UEFI boot
+- SATA disk controller
 - Minimal of 1GB RAM
 - At least 2x vCPU
 - An assigned network
@@ -14,6 +15,4 @@ Currently, we only publish a VMDK virtual disk, due to issues with our previous

 - HyperV
 - VirtualBox
- VMware
-
-You might need to convert the VMDK into a different format that is accepted by your virtualization platform of choice.
+- VMware
--- a/Documentation/boards/raspberrypi.md
+++ b/Documentation/boards/raspberrypi.md
@@ -2,7 +2,7 @@

 Supported Hardware:

-| Device | Board | 
+| Device | Board |
 |--------|-----------|
 | Raspberry Pi A+/B/B+| rpi |
 | Raspberry Pi Zero | rpi |
@@ -21,7 +21,7 @@ For access to terminal over serial console, add `console=ttyAMA0,115200` to `cmd

 ## I2C

-Add `dtparam=i2c1=on` and `dtparam=i2c_arm=on` to `config.txt`. After that we create a module file on host with [config usb stick][config] or direct into `/etc/modules-load.d`. 
+Add `dtparam=i2c1=on` and `dtparam=i2c_arm=on` to `config.txt`. After that we create a module file on host with [config usb stick][config] or direct into `/etc/modules-load.d`.

 rpi-i2c.conf:
 ```
@@ -29,6 +29,19 @@ i2c-dev
 i2c-bcm2708
 ```

+## USB Boot
+
+USB mass storage boot is available on Raspberry Pi 3B, 3B+, 3A+, and 2B v1.2.
+To enable USB boot, add `program_usb_boot_mode=1` into `config.txt`. Note that this **permanently** alters the one-time programmable memory of the device.
+
+For more information see [RaspberryPi](https://www.raspberrypi.org/documentation/hardware/raspberrypi/bootmodes/msd.md).
+
+### Caveats
+
+* All bootable SD cards must be removed.
+* Boot time can be significantly longer with USB. This is due to the boot process first attempting to boot from SD card, failing, and resorting to USB.
+* Many USB drives simply do not work for boot. This is likely due to minimal driver support in uboot and will not be fixed. If you can't get it to boot on one drive, try a different brand/model. SanDisk Cruzer drives seem to have a higher rate of issues.
+
 ## Tweaks

 If you don't need bluetooth, disabled it with add `dtoverlay=pi3-disable-bt` into `config.txt`.
--- a/Documentation/kernel.md
+++ b/Documentation/kernel.md
@@ -3,10 +3,10 @@

 | Board | Version |
 |-------|---------|
-| Open Virtual Applicance | 4.19.56 |
-| Raspberry Pi | 4.19.58 |
-| Tinker Board | 4.19.56 |
-| Odroid-C2 | 4.19.56 |
-| Odroid-XU4 | 4.19.56 |
-| Orangepi-Prime | 4.19.56 |
-| Intel NUC | 4.19.56 |
+| Open Virtual Applicance | 4.19.72 |
+| Raspberry Pi | 4.19.71 |
+| Tinker Board | 4.19.72 |
+| Odroid-C2 | 4.19.72 |
+| Odroid-XU4 | 4.19.72 |
+| Orangepi-Prime | 4.19.72 |
+| Intel NUC | 4.19.72 |
--- a/buildroot-external/board/intel/nuc/kernel.config
+++ b/buildroot-external/board/intel/nuc/kernel.config
@@ -3,8 +3,6 @@ CONFIG_EFI_STUB=y
 CONFIG_SCSI_LOWLEVEL=y
 CONFIG_USB_XHCI_HCD=y

-CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-
 CONFIG_IGB=y

 CONFIG_IWLWIFI=m
--- a/buildroot-external/board/raspberrypi/boot-env.txt
+++ b/buildroot-external/board/raspberrypi/boot-env.txt
--- a/buildroot-external/board/raspberrypi/hassos-hook.sh
+++ b/buildroot-external/board/raspberrypi/hassos-hook.sh
@@ -7,11 +7,9 @@ function hassos_pre_image() {
    cp -t "${BOOT_DATA}" \
        "${BINARIES_DIR}/u-boot.bin" \
        "${BINARIES_DIR}/boot.scr"
-    cp -t "${BOOT_DATA}" \
-        "${BINARIES_DIR}"/*.dtb \
-        "${BINARIES_DIR}/rpi-firmware/bootcode.bin"
+    cp "${BINARIES_DIR}"/*.dtb "${BOOT_DATA}/"
    cp -r "${BINARIES_DIR}/rpi-firmware/overlays" "${BOOT_DATA}/"
-    cp -f "${BOARD_DIR}/../boot-env.txt" "${BOOT_DATA}/config.txt"
+    cp "${BOARD_DIR}/../boot-env.txt" "${BOOT_DATA}/config.txt"

    # Firmware
    if [[ "${BOARD_ID}" =~ "rpi4" ]]; then
@@ -21,7 +19,8 @@ function hassos_pre_image() {
    else
        cp -t "${BOOT_DATA}" \
        "${BINARIES_DIR}/rpi-firmware/fixup.dat" \
-        "${BINARIES_DIR}/rpi-firmware/start.elf"
+        "${BINARIES_DIR}/rpi-firmware/start.elf" \
+        "${BINARIES_DIR}/rpi-firmware/bootcode.bin"
    fi

    # Set cmd options
@@ -29,7 +28,7 @@ function hassos_pre_image() {

    # Enable 64bit support
    if [[ "${BOARD_ID}" =~ "64" ]]; then
-        echo "arm_64bit=1" >> "${BOOT_DATA}/config.txt"
+        sed -i "s|#arm_64bit|arm_64bit|g" "${BOOT_DATA}/config.txt"
    fi
 }

--- a/buildroot-external/board/raspberrypi/kernel.config
+++ b/buildroot-external/board/raspberrypi/kernel.config
@@ -1 +1,2 @@
-CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+CONFIG_FB_SIMPLE=y
+# CONFIG_FB_BCM2708 is not set
--- a/buildroot-external/board/raspberrypi/uboot-boot.ush
+++ b/buildroot-external/board/raspberrypi/uboot-boot.ush
@@ -1,15 +1,16 @@

-part start mmc ${devnum} 6 mmc_env
-mmc dev ${devnum}
+part start ${devtype} ${devnum} 6 dev_env
+${devtype} dev ${devnum}
+
 setenv loadbootstate " \
    echo 'loading env...'; \
-    mmc read ${ramdisk_addr_r} ${mmc_env} 0x20; \
+    ${devtype} read ${ramdisk_addr_r} ${dev_env} 0x20; \
    env import -c ${ramdisk_addr_r} 0x4000;"

 setenv storebootstate " \
    echo 'storing env...'; \
    env export -c -s 0x4000 ${ramdisk_addr_r} BOOT_ORDER BOOT_A_LEFT BOOT_B_LEFT; \
-    mmc write ${ramdisk_addr_r} ${mmc_env} 0x20;"
+    ${devtype} write ${ramdisk_addr_r} ${dev_env} 0x20;"

 run loadbootstate
 test -n "${BOOT_ORDER}" || setenv BOOT_ORDER "A B"
@@ -37,14 +38,14 @@ for BOOT_SLOT in "${BOOT_ORDER}"; do
    if test ${BOOT_A_LEFT} -gt 0; then
      setexpr BOOT_A_LEFT ${BOOT_A_LEFT} - 1
      echo "Found valid slot A, ${BOOT_A_LEFT} attempts remaining"
-      setenv load_kernel "ext4load mmc 0:2 ${kernel_addr_r} zImage"
+      setenv load_kernel "ext4load ${devtype} ${devnum}:2 ${kernel_addr_r} zImage"
      setenv bootargs "${bootargs_hassos} ${bootargs_rpi} ${bootargs_a} rauc.slot=A"
    fi
  elif test "x${BOOT_SLOT}" = "xB"; then
    if test ${BOOT_B_LEFT} -gt 0; then
      setexpr BOOT_B_LEFT ${BOOT_B_LEFT} - 1
      echo "Found valid slot B, ${BOOT_B_LEFT} attempts remaining"
-      setenv load_kernel "ext4load mmc 0:4 ${kernel_addr_r} zImage"
+      setenv load_kernel "ext4load ${devtype} ${devnum}:4 ${kernel_addr_r} zImage"
      setenv bootargs "${bootargs_hassos} ${bootargs_rpi} ${bootargs_b} rauc.slot=B"
    fi
  fi
--- a/buildroot-external/board/raspberrypi/uboot-boot64.ush
+++ b/buildroot-external/board/raspberrypi/uboot-boot64.ush
@@ -1,15 +1,16 @@

-part start mmc ${devnum} 6 mmc_env
-mmc dev ${devnum}
+part start ${devtype} ${devnum} 6 dev_env
+${devtype} dev ${devnum}
+
 setenv loadbootstate " \
    echo 'loading env...'; \
-    mmc read ${ramdisk_addr_r} ${mmc_env} 0x20; \
+    ${devtype} read ${ramdisk_addr_r} ${dev_env} 0x20; \
    env import -c ${ramdisk_addr_r} 0x4000;"

 setenv storebootstate " \
    echo 'storing env...'; \
    env export -c -s 0x4000 ${ramdisk_addr_r} BOOT_ORDER BOOT_A_LEFT BOOT_B_LEFT; \
-    mmc write ${ramdisk_addr_r} ${mmc_env} 0x20;"
+    ${devtype} write ${ramdisk_addr_r} ${dev_env} 0x20;"

 run loadbootstate
 test -n "${BOOT_ORDER}" || setenv BOOT_ORDER "A B"
@@ -37,14 +38,14 @@ for BOOT_SLOT in "${BOOT_ORDER}"; do
    if test ${BOOT_A_LEFT} -gt 0; then
      setexpr BOOT_A_LEFT ${BOOT_A_LEFT} - 1
      echo "Found valid slot A, ${BOOT_A_LEFT} attempts remaining"
-      setenv load_kernel "ext4load mmc 0:2 ${kernel_addr_r} Image"
+      setenv load_kernel "ext4load ${devtype} ${devnum}:2 ${kernel_addr_r} Image"
      setenv bootargs "${bootargs_hassos} ${bootargs_rpi} ${bootargs_a} rauc.slot=A"
    fi
  elif test "x${BOOT_SLOT}" = "xB"; then
    if test ${BOOT_B_LEFT} -gt 0; then
      setexpr BOOT_B_LEFT ${BOOT_B_LEFT} - 1
      echo "Found valid slot B, ${BOOT_B_LEFT} attempts remaining"
-      setenv load_kernel "ext4load mmc 0:4 ${kernel_addr_r} Image"
+      setenv load_kernel "ext4load ${devtype} ${devnum}:4 ${kernel_addr_r} Image"
      setenv bootargs "${bootargs_hassos} ${bootargs_rpi} ${bootargs_b} rauc.slot=B"
    fi
  fi
--- a/buildroot-external/board/raspberrypi/uboot.config
+++ b/buildroot-external/board/raspberrypi/uboot.config
@@ -2,3 +2,9 @@
 # CONFIG_DOS_PARTITION is not set
 CONFIG_CMD_FILEENV=y
 CONFIG_ENV_IS_NOWHERE=Y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_FUNCTION_MASS_STORAGE=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
--- a/buildroot-external/configs/intel_nuc_defconfig
+++ b/buildroot-external/configs/intel_nuc_defconfig
@@ -19,7 +19,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/intel/nuc $(BR2_EXTERNAL_HASSOS_PATH)/board/intel/nuc/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.56"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.72"
 BR2_LINUX_KERNEL_DEFCONFIG="x86_64"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/intel/nuc/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
@@ -62,7 +62,6 @@ BR2_PACKAGE_DROPBEAR=y
 # BR2_PACKAGE_DROPBEAR_CLIENT is not set
 # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
 BR2_PACKAGE_NETWORK_MANAGER=y
-BR2_PACKAGE_NETWORK_MANAGER_MODEM_MANAGER=y
 BR2_PACKAGE_TINI=y
 BR2_PACKAGE_DOCKER_ENGINE=y
 BR2_PACKAGE_DOCKER_CLI=y
@@ -95,12 +94,12 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/amd64-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="169"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="187"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/intel-nuc-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/amd64-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="11"
+BR2_PACKAGE_HASSOS_CLI_VERSION="14"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"
--- a/buildroot-external/configs/odroid_c2_defconfig
+++ b/buildroot-external/configs/odroid_c2_defconfig
@@ -19,7 +19,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-c2 $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-c2/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.56"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.72"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-c2/kernel.config"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config"
@@ -56,7 +56,6 @@ BR2_PACKAGE_DROPBEAR=y
 # BR2_PACKAGE_DROPBEAR_CLIENT is not set
 # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
 BR2_PACKAGE_NETWORK_MANAGER=y
-BR2_PACKAGE_NETWORK_MANAGER_MODEM_MANAGER=y
 BR2_PACKAGE_TINI=y
 BR2_PACKAGE_DOCKER_ENGINE=y
 BR2_PACKAGE_DOCKER_CLI=y
@@ -89,12 +88,12 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/aarch64-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="169"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="187"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/odroid-c2-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/aarch64-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="11"
+BR2_PACKAGE_HASSOS_CLI_VERSION="14"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"
--- a/buildroot-external/configs/odroid_xu4_defconfig
+++ b/buildroot-external/configs/odroid_xu4_defconfig
@@ -19,14 +19,10 @@ BR2_ROOTFS_POST_BUILD_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-xu4 $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-xu4/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
-#BR2_LINUX_KERNEL_CUSTOM_GIT=y
-#BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/hardkernel/linux.git"
-#BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="4.14.87-153"
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.56"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.72"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="exynos5422-odroidxu4"
-#BR2_LINUX_KERNEL_DEFCONFIG="odroidxu4"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-xu4/kernel.config"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config"
@@ -63,7 +59,6 @@ BR2_PACKAGE_DROPBEAR=y
 # BR2_PACKAGE_DROPBEAR_CLIENT is not set
 # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
 BR2_PACKAGE_NETWORK_MANAGER=y
-BR2_PACKAGE_NETWORK_MANAGER_MODEM_MANAGER=y
 BR2_PACKAGE_TINI=y
 BR2_PACKAGE_DOCKER_ENGINE=y
 BR2_PACKAGE_DOCKER_CLI=y
@@ -98,12 +93,12 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/armv7-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="169"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="187"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/odroid-xu-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/armv7-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="11"
+BR2_PACKAGE_HASSOS_CLI_VERSION="14"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"
--- a/buildroot-external/configs/opi_prime_defconfig
+++ b/buildroot-external/configs/opi_prime_defconfig
@@ -37,7 +37,7 @@ BR2_TARGET_UBOOT_BOOT_SCRIPT_SOURCE="$(BR2_EXTERNAL_HASSOS_PATH)/board/orangepi/
 BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/bootloader/uboot.config $(BR2_EXTERNAL_HASSOS_PATH)/board/orangepi/prime/uboot.config"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.56"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.72"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-h5-orangepi-prime"
 BR2_LINUX_KERNEL_LZ4=y
@@ -78,7 +78,6 @@ BR2_PACKAGE_DROPBEAR=y
 # BR2_PACKAGE_DROPBEAR_CLIENT is not set
 # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
 BR2_PACKAGE_NETWORK_MANAGER=y
-BR2_PACKAGE_NETWORK_MANAGER_MODEM_MANAGER=y
 BR2_PACKAGE_TINI=y
 BR2_PACKAGE_DOCKER_ENGINE=y
 BR2_PACKAGE_DOCKER_CLI=y
@@ -103,12 +102,12 @@ BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HOST_SWIG=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/aarch64-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="169"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="187"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/orangepi-prime-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/aarch64-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="11"
+BR2_PACKAGE_HASSOS_CLI_VERSION="14"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"
--- a/buildroot-external/configs/ova_defconfig
+++ b/buildroot-external/configs/ova_defconfig
@@ -19,7 +19,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/intel/ova $(BR2_EXTERNAL_HASSOS_PATH)/board/intel/ova/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.56"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.72"
 BR2_LINUX_KERNEL_DEFCONFIG="x86_64"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/intel/ova/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
@@ -52,7 +52,6 @@ BR2_PACKAGE_DROPBEAR=y
 # BR2_PACKAGE_DROPBEAR_CLIENT is not set
 # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
 BR2_PACKAGE_NETWORK_MANAGER=y
-BR2_PACKAGE_NETWORK_MANAGER_MODEM_MANAGER=y
 BR2_PACKAGE_TINI=y
 BR2_PACKAGE_DOCKER_ENGINE=y
 BR2_PACKAGE_DOCKER_CLI=y
@@ -85,12 +84,12 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/amd64-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="169"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="187"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/qemux86-64-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/amd64-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="11"
+BR2_PACKAGE_HASSOS_CLI_VERSION="14"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"
--- a/buildroot-external/configs/rpi0_w_defconfig
+++ b/buildroot-external/configs/rpi0_w_defconfig
@@ -22,12 +22,12 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi0-
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
 BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="8222f38b1ceadd0642d49812fd34a3a6cb00e264"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="bd3452c84c206a171fa4cf5f6ddfab5687667228"
 BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2708-rpi-0-w"
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2708-rpi-zero-w"
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
 BR2_LINUX_KERNEL_NEEDS_HOST_LIBELF=y
 BR2_PACKAGE_BUSYBOX_CONFIG="$(BR2_EXTERNAL_HASSOS_PATH)/busybox.config"
@@ -59,7 +59,6 @@ BR2_PACKAGE_DROPBEAR=y
 # BR2_PACKAGE_DROPBEAR_CLIENT is not set
 # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
 BR2_PACKAGE_NETWORK_MANAGER=y
-BR2_PACKAGE_NETWORK_MANAGER_MODEM_MANAGER=y
 BR2_PACKAGE_TINI=y
 BR2_PACKAGE_DOCKER_ENGINE=y
 BR2_PACKAGE_DOCKER_CLI=y
@@ -92,12 +91,12 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/armhf-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="169"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="187"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/raspberrypi-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/armhf-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="11"
+BR2_PACKAGE_HASSOS_CLI_VERSION="14"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"
--- a/buildroot-external/configs/rpi2_defconfig
+++ b/buildroot-external/configs/rpi2_defconfig
@@ -22,7 +22,7 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi2
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
 BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="8222f38b1ceadd0642d49812fd34a3a6cb00e264"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="bd3452c84c206a171fa4cf5f6ddfab5687667228"
 BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
@@ -58,7 +58,6 @@ BR2_PACKAGE_DROPBEAR=y
 # BR2_PACKAGE_DROPBEAR_CLIENT is not set
 # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
 BR2_PACKAGE_NETWORK_MANAGER=y
-BR2_PACKAGE_NETWORK_MANAGER_MODEM_MANAGER=y
 BR2_PACKAGE_TINI=y
 BR2_PACKAGE_DOCKER_ENGINE=y
 BR2_PACKAGE_DOCKER_CLI=y
@@ -91,12 +90,12 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/armv7-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="169"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="187"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/raspberrypi2-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/armv7-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="11"
+BR2_PACKAGE_HASSOS_CLI_VERSION="14"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"
--- a/buildroot-external/configs/rpi3_64_defconfig
+++ b/buildroot-external/configs/rpi3_64_defconfig
@@ -22,7 +22,7 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi3-
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
 BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="8222f38b1ceadd0642d49812fd34a3a6cb00e264"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="bd3452c84c206a171fa4cf5f6ddfab5687667228"
 BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi3"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
@@ -59,7 +59,6 @@ BR2_PACKAGE_DROPBEAR=y
 # BR2_PACKAGE_DROPBEAR_CLIENT is not set
 # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
 BR2_PACKAGE_NETWORK_MANAGER=y
-BR2_PACKAGE_NETWORK_MANAGER_MODEM_MANAGER=y
 BR2_PACKAGE_TINI=y
 BR2_PACKAGE_DOCKER_ENGINE=y
 BR2_PACKAGE_DOCKER_CLI=y
@@ -92,12 +91,12 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/aarch64-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="169"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="187"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/raspberrypi3-64-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/aarch64-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="11"
+BR2_PACKAGE_HASSOS_CLI_VERSION="14"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"
--- a/buildroot-external/configs/rpi3_defconfig
+++ b/buildroot-external/configs/rpi3_defconfig
@@ -22,7 +22,7 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi3
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
 BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="8222f38b1ceadd0642d49812fd34a3a6cb00e264"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="bd3452c84c206a171fa4cf5f6ddfab5687667228"
 BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
@@ -59,7 +59,6 @@ BR2_PACKAGE_DROPBEAR=y
 # BR2_PACKAGE_DROPBEAR_CLIENT is not set
 # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
 BR2_PACKAGE_NETWORK_MANAGER=y
-BR2_PACKAGE_NETWORK_MANAGER_MODEM_MANAGER=y
 BR2_PACKAGE_TINI=y
 BR2_PACKAGE_DOCKER_ENGINE=y
 BR2_PACKAGE_DOCKER_CLI=y
@@ -92,12 +91,12 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/armv7-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="169"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="187"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/raspberrypi3-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/armv7-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="11"
+BR2_PACKAGE_HASSOS_CLI_VERSION="14"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"
--- a/buildroot-external/configs/rpi4_64_defconfig
+++ b/buildroot-external/configs/rpi4_64_defconfig
@@ -22,9 +22,9 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi4-
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
 BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="8222f38b1ceadd0642d49812fd34a3a6cb00e264"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="bd3452c84c206a171fa4cf5f6ddfab5687667228"
 BR2_LINUX_KERNEL_DEFCONFIG="bcm2711"
-BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config"
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config"
 BR2_LINUX_KERNEL_LZ4=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="broadcom/bcm2711-rpi-4-b"
@@ -60,7 +60,6 @@ BR2_PACKAGE_DROPBEAR=y
 # BR2_PACKAGE_DROPBEAR_CLIENT is not set
 # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
 BR2_PACKAGE_NETWORK_MANAGER=y
-BR2_PACKAGE_NETWORK_MANAGER_MODEM_MANAGER=y
 BR2_PACKAGE_TINI=y
 BR2_PACKAGE_DOCKER_ENGINE=y
 BR2_PACKAGE_DOCKER_CLI=y
@@ -93,12 +92,12 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/aarch64-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="169"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="187"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/raspberrypi4-64-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/aarch64-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="11"
+BR2_PACKAGE_HASSOS_CLI_VERSION="14"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"
--- a/buildroot-external/configs/rpi4_defconfig
+++ b/buildroot-external/configs/rpi4_defconfig
@@ -22,9 +22,9 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi4
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
 BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="8222f38b1ceadd0642d49812fd34a3a6cb00e264"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="bd3452c84c206a171fa4cf5f6ddfab5687667228"
 BR2_LINUX_KERNEL_DEFCONFIG="bcm2711"
-BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config"
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config"
 BR2_LINUX_KERNEL_LZ4=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2711-rpi-4-b"
@@ -60,7 +60,6 @@ BR2_PACKAGE_DROPBEAR=y
 # BR2_PACKAGE_DROPBEAR_CLIENT is not set
 # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
 BR2_PACKAGE_NETWORK_MANAGER=y
-BR2_PACKAGE_NETWORK_MANAGER_MODEM_MANAGER=y
 BR2_PACKAGE_TINI=y
 BR2_PACKAGE_DOCKER_ENGINE=y
 BR2_PACKAGE_DOCKER_CLI=y
@@ -93,12 +92,12 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/armv7-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="169"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="187"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/raspberrypi4-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/armv7-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="11"
+BR2_PACKAGE_HASSOS_CLI_VERSION="14"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"
--- a/buildroot-external/configs/rpi_defconfig
+++ b/buildroot-external/configs/rpi_defconfig
@@ -22,7 +22,7 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi $
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
 BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="8222f38b1ceadd0642d49812fd34a3a6cb00e264"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="bd3452c84c206a171fa4cf5f6ddfab5687667228"
 BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
@@ -58,7 +58,6 @@ BR2_PACKAGE_DROPBEAR=y
 # BR2_PACKAGE_DROPBEAR_CLIENT is not set
 # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
 BR2_PACKAGE_NETWORK_MANAGER=y
-BR2_PACKAGE_NETWORK_MANAGER_MODEM_MANAGER=y
 BR2_PACKAGE_TINI=y
 BR2_PACKAGE_DOCKER_ENGINE=y
 BR2_PACKAGE_DOCKER_CLI=y
@@ -91,12 +90,12 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/armhf-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="169"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="187"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/raspberrypi-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/armhf-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="11"
+BR2_PACKAGE_HASSOS_CLI_VERSION="14"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"
--- a/buildroot-external/configs/tinker_defconfig
+++ b/buildroot-external/configs/tinker_defconfig
@@ -21,7 +21,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/asus/tinker $(BR2_EXTERNAL_HASSOS_PATH)/board/asus/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.56"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.72"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(BR2_EXTERNAL_HASSOS_PATH)/board/asus/tinker/kernel.config"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config"
@@ -59,7 +59,6 @@ BR2_PACKAGE_DROPBEAR=y
 # BR2_PACKAGE_DROPBEAR_CLIENT is not set
 # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
 BR2_PACKAGE_NETWORK_MANAGER=y
-BR2_PACKAGE_NETWORK_MANAGER_MODEM_MANAGER=y
 BR2_PACKAGE_TINI=y
 BR2_PACKAGE_DOCKER_ENGINE=y
 BR2_PACKAGE_DOCKER_CLI=y
@@ -96,12 +95,12 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/armv7-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="169"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="187"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/tinker-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/armv7-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="11"
+BR2_PACKAGE_HASSOS_CLI_VERSION="14"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"
--- a/buildroot-external/kernel/hassos.config
+++ b/buildroot-external/kernel/hassos.config
@@ -4,6 +4,8 @@ CONFIG_CMDLINE=""
 CONFIG_ZRAM=y
 CONFIG_ZSMALLOC=y

+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+
 CONFIG_MISC_FILESYSTEMS=y
 CONFIG_BLOCK=y
 CONFIG_EXT4_FS=y
--- a/buildroot-external/meta
+++ b/buildroot-external/meta
@@ -1,7 +1,7 @@
 VERSION_MAJOR=3
-VERSION_BUILD=3
+VERSION_BUILD=5

 HASSOS_NAME="HassOS"
 HASSOS_ID="hassos"

-DEPLOYMENT="development"
+DEPLOYMENT="staging"
--- a/buildroot-external/package/bluetooth-bcm43xx/bluetooth-bcm43xx.mk
+++ b/buildroot-external/package/bluetooth-bcm43xx/bluetooth-bcm43xx.mk
@@ -11,8 +11,8 @@ BLUETOOTH_BCM43XX_SITE = $(BR2_EXTERNAL_HASSOS_PATH)/package/bluetooth-bcm43xx
 BLUETOOTH_BCM43XX_SITE_METHOD = local

 define BLUETOOTH_BCM43XX_BUILD_CMDS
-	curl -L -o $(@D)/BCM43430A1.hcd https://raw.githubusercontent.com/RPi-Distro/bluez-firmware/ade2bae1aaaebede09abb8fb546f767a0e4c7804/broadcom/BCM43430A1.hcd
-	curl -L -o $(@D)/BCM4345C0.hcd https://raw.githubusercontent.com/RPi-Distro/bluez-firmware/ade2bae1aaaebede09abb8fb546f767a0e4c7804/broadcom/BCM4345C0.hcd
+	curl -L -o $(@D)/BCM43430A1.hcd https://raw.githubusercontent.com/RPi-Distro/bluez-firmware/96eefffcccc725425fd83be5e0704a5c32b79e54/broadcom/BCM43430A1.hcd
+	curl -L -o $(@D)/BCM4345C0.hcd https://raw.githubusercontent.com/RPi-Distro/bluez-firmware/96eefffcccc725425fd83be5e0704a5c32b79e54/broadcom/BCM4345C0.hcd
 endef

 define BLUETOOTH_BCM43XX_INSTALL_TARGET_CMDS
--- a/buildroot-external/scripts/hdd-image.sh
+++ b/buildroot-external/scripts/hdd-image.sh
@@ -91,7 +91,7 @@ function create_kernel_image() {
    # Mount / init file structs
    sudo mkdir -p /mnt/data/
    sudo mount -o loop "${kernel_img}" /mnt/data
-    sudo cp -f "${kernel}" /mnt/data/
+    sudo cp "${kernel}" /mnt/data/
    sudo umount /mnt/data
 }

--- a/buildroot-patches/0004-rpi-firmware-Bump-firmware-for-kernel-4.19-RPi4.patch
+++ b/buildroot-patches/0004-rpi-firmware-Bump-firmware-for-kernel-4.19-RPi4.patch
@@ -38,7 +38,7 @@ index 9988dda717..3eae7e270b 100644
@@ -1,2 +1,2 @@
 # Locally computed
 -sha256	f1d631920ed4ae15f368ba7b8b3caa4ed604f5223372cc6debbd39a101eb8d74  rpi-firmware-81cca1a9380c828299e884dba5efd0d4acb39e8d.tar.gz
-+sha256	62a63b4a8be10da779342799148919d1a50c1939bf6cae93d61cb1b5daed810f  rpi-firmware-cba4be275b9943b353ea2e5201ab2badd4c760e9.tar.gz
+sha256	e2b4022441b39e5879776e7c7d45037a6feb2c849405cde37b7fd657b4a26a23  rpi-firmware-3bba1909a004fb34d5b01db2c319976f33d8eb1d.tar.gz
 diff --git a/package/rpi-firmware/rpi-firmware.mk b/package/rpi-firmware/rpi-firmware.mk
 index 630bc670ca..fd2970333e 100644
 --- a/package/rpi-firmware/rpi-firmware.mk
@@ -48,7 +48,7 @@ index 630bc670ca..fd2970333e 100644
 ################################################################################
 
 -RPI_FIRMWARE_VERSION = 81cca1a9380c828299e884dba5efd0d4acb39e8d
-+RPI_FIRMWARE_VERSION = cba4be275b9943b353ea2e5201ab2badd4c760e9
+RPI_FIRMWARE_VERSION = 3bba1909a004fb34d5b01db2c319976f33d8eb1d
 RPI_FIRMWARE_SITE = $(call github,raspberrypi,firmware,$(RPI_FIRMWARE_VERSION))
 RPI_FIRMWARE_LICENSE = BSD-3-Clause
 RPI_FIRMWARE_LICENSE_FILES = boot/LICENCE.broadcom
--- a/buildroot-patches/0007-rpi-use-latest-wifi-driver.patch
+++ b/buildroot-patches/0007-rpi-use-latest-wifi-driver.patch
@@ -16,7 +16,7 @@ index c61a47e..84e02f3 100644
@@ -1,3 +1,3 @@
 # Locally calculated
 -sha256 155ebd5f08b819e0ce4e1950fcc972b2086cee3c16d36aba348beba1910c1fd2  rpi-wifi-firmware-8c1e2bff1da9850f68efcfff3da5d939ec27a2ee.tar.gz
-+sha256 95d26fadfa73505b1fdcc0080728655109ceef9b5a0e63f36d9383e9ada57ab2  rpi-wifi-firmware-b518de45ced519e8f7a499f4778100173402ae43.tar.gz
+sha256 0b2bbf0bcdb7eabc488cc96e418ee17efcd9803590abc64d055ea3b762e2411b  rpi-wifi-firmware-130cb86fa30cafbd575d38865fa546350d4c5f9c.tar.gz
 sha256 b16056fc91b82a0e3e8de8f86c2dac98201aa9dc3cbd33e8d38f1b087fcec30d  LICENCE.broadcom_bcm43xx
 diff --git a/package/rpi-wifi-firmware/rpi-wifi-firmware.mk b/package/rpi-wifi-firmware/rpi-wifi-firmware.mk
 index 2eb8cee..da915bd 100644
@@ -28,7 +28,7 @@ index 2eb8cee..da915bd 100644
 
 -RPI_WIFI_FIRMWARE_VERSION = 8c1e2bff1da9850f68efcfff3da5d939ec27a2ee
 -RPI_WIFI_FIRMWARE_SITE = $(call github,LibreELEC,brcmfmac_sdio-firmware-rpi,$(RPI_WIFI_FIRMWARE_VERSION))
-+RPI_WIFI_FIRMWARE_VERSION = b518de45ced519e8f7a499f4778100173402ae43
+RPI_WIFI_FIRMWARE_VERSION = 130cb86fa30cafbd575d38865fa546350d4c5f9c
 +RPI_WIFI_FIRMWARE_SITE = $(call github,RPi-Distro,firmware-nonfree,$(RPI_WIFI_FIRMWARE_VERSION))
 RPI_WIFI_FIRMWARE_LICENSE = PROPRIETARY
 RPI_WIFI_FIRMWARE_LICENSE_FILES = LICENCE.broadcom_bcm43xx
--- a/buildroot/package/rpi-firmware/rpi-firmware.hash
+++ b/buildroot/package/rpi-firmware/rpi-firmware.hash
@@ -1,2 +1,2 @@
 # Locally computed
-sha256	62a63b4a8be10da779342799148919d1a50c1939bf6cae93d61cb1b5daed810f  rpi-firmware-cba4be275b9943b353ea2e5201ab2badd4c760e9.tar.gz
+sha256	e2b4022441b39e5879776e7c7d45037a6feb2c849405cde37b7fd657b4a26a23  rpi-firmware-3bba1909a004fb34d5b01db2c319976f33d8eb1d.tar.gz
--- a/buildroot/package/rpi-firmware/rpi-firmware.mk
+++ b/buildroot/package/rpi-firmware/rpi-firmware.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################

-RPI_FIRMWARE_VERSION = cba4be275b9943b353ea2e5201ab2badd4c760e9
+RPI_FIRMWARE_VERSION = 3bba1909a004fb34d5b01db2c319976f33d8eb1d
 RPI_FIRMWARE_SITE = $(call github,raspberrypi,firmware,$(RPI_FIRMWARE_VERSION))
 RPI_FIRMWARE_LICENSE = BSD-3-Clause
 RPI_FIRMWARE_LICENSE_FILES = boot/LICENCE.broadcom
--- a/buildroot/package/rpi-wifi-firmware/rpi-wifi-firmware.hash
+++ b/buildroot/package/rpi-wifi-firmware/rpi-wifi-firmware.hash
@@ -1,3 +1,3 @@
 # Locally calculated
-sha256 95d26fadfa73505b1fdcc0080728655109ceef9b5a0e63f36d9383e9ada57ab2  rpi-wifi-firmware-b518de45ced519e8f7a499f4778100173402ae43.tar.gz
+sha256 0b2bbf0bcdb7eabc488cc96e418ee17efcd9803590abc64d055ea3b762e2411b  rpi-wifi-firmware-130cb86fa30cafbd575d38865fa546350d4c5f9c.tar.gz
 sha256 b16056fc91b82a0e3e8de8f86c2dac98201aa9dc3cbd33e8d38f1b087fcec30d  LICENCE.broadcom_bcm43xx
--- a/buildroot/package/rpi-wifi-firmware/rpi-wifi-firmware.mk
+++ b/buildroot/package/rpi-wifi-firmware/rpi-wifi-firmware.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################

-RPI_WIFI_FIRMWARE_VERSION = b518de45ced519e8f7a499f4778100173402ae43
+RPI_WIFI_FIRMWARE_VERSION = 130cb86fa30cafbd575d38865fa546350d4c5f9c
 RPI_WIFI_FIRMWARE_SITE = $(call github,RPi-Distro,firmware-nonfree,$(RPI_WIFI_FIRMWARE_VERSION))
 RPI_WIFI_FIRMWARE_LICENSE = PROPRIETARY
 RPI_WIFI_FIRMWARE_LICENSE_FILES = LICENCE.broadcom_bcm43xx
--- a/scripts/enter.sh
+++ b/scripts/enter.sh
@@ -1,9 +1,11 @@
 #!/bin/bash
 BUILDER_UID="$(id -u)"
 BUILDER_GID="$(id -g)"
+CACHE_DIR="${CACHE_DIR:-$HOME/hassos-cache}"

+sudo mkdir -p "${CACHE_DIR}"
 sudo docker build -t hassos:local .
 sudo docker run -it --rm --privileged \
-  -v "$(pwd):/build" -v "${CACHE_DIR:=$HOME/hassos-cache}:/cache" \
+  -v "$(pwd):/build" -v "${CACHE_DIR}:/cache" \
  -e BUILDER_UID="${BUILDER_UID}" -e BUILDER_GID="${BUILDER_GID}" \
  hassos:local bash
--- a/scripts/entry.sh
+++ b/scripts/entry.sh
@@ -7,7 +7,7 @@ USER="root"
 dockerd -s vfs &> /dev/null &

 # Setup local user
-if [ "${BUILDER_UID:0}" -ne 0 ] && [ "${BUILDER_GID:0}" -ne 0 ]; then
+if [ "${BUILDER_UID:-0}" -ne 0 ] && [ "${BUILDER_GID:-0}" -ne 0 ]; then
  groupadd -g "${BUILDER_GID}" builder
  useradd -m -u "${BUILDER_UID}" -g "${BUILDER_GID}" -G docker,sudo builder
  echo "builder ALL=(ALL:ALL) NOPASSWD: ALL" >> /etc/sudoers
--- a/scripts/update-cli.sh
+++ b/scripts/update-cli.sh
@@ -7,3 +7,4 @@ if [ -z "$1" ]; then
 fi

 sed -i "s/CLI_VERSION=\".*\"/CLI_VERSION=\"$1\"/g" buildroot-external/configs/*
+git commit -m "OS: Update CLI $1" buildroot-external/configs/*
--- a/scripts/update-rpi-kernel.sh
+++ b/scripts/update-rpi-kernel.sh
@@ -7,3 +7,4 @@ if [ -z "$1" ]; then
 fi

 sed -i "s/BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION=\".*\"/BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION=\"$1\"/g" buildroot-external/configs/rpi*
+git commit -m "RaspberryPi: Update kernel $1" buildroot-external/configs/*
--- a/scripts/update-supervisor.sh
+++ b/scripts/update-supervisor.sh
@@ -7,3 +7,5 @@ if [ -z "$1" ]; then
 fi

 sed -i "s/SUPERVISOR_VERSION=\".*\"/SUPERVISOR_VERSION=\"$1\"/g" buildroot-external/configs/*
+git commit -m "OS: Update supervisor $1" buildroot-external/configs/*
+
Author	SHA1	Message	Date
Pascal Vizeli	2e3e518982	Merge branch 'dev' of https://github.com/home-assistant/hassos into dev	2019-09-13 12:13:32 +00:00
Pascal Vizeli	c12ae11ed7	OS: Update supervisor 187	2019-09-13 12:13:28 +00:00
Pascal Vizeli	956badb2fd	Change to RC	2019-09-13 14:11:53 +02:00
Pascal Vizeli	e71400cd5c	Fix handling with FB on RPi4 (#477 )	2019-09-13 14:08:47 +02:00
Pascal Vizeli	6668d77b93	Fix rpi firmware checksum	2019-09-12 15:57:15 +00:00
Pascal Vizeli	629f13f3d9	Update kernels to 4.19.72 (#476 )	2019-09-12 16:45:44 +02:00
Pascal Vizeli	dfe261a715	rpi-update-firmware (#475 )	2019-09-12 16:34:12 +02:00
Pascal Vizeli	756a0c9b13	RaspberryPi: Update kernel bd3452c84c206a171fa4cf5f6ddfab5687667228	2019-09-12 14:20:36 +00:00
Pascal Vizeli	49948b577e	Remove ModemManager (#474 )	2019-09-12 16:11:36 +02:00
Pascal Vizeli	61516914ce	Fix screen issue with RPi4 (#472 )	2019-09-09 17:10:28 +02:00
Moshe Levi	c424b295b1	create cache dir if not exist (#471 ) Signed-off-by: Moshe Levi <moshele@mellanox.com>	2019-09-09 16:06:53 +02:00
Pascal Vizeli	c37d0ecd76	Bump version 3.5	2019-08-28 15:55:12 +02:00
Pascal Vizeli	abf9a3b7c3	OS: Update supervisor 184	2019-08-28 13:53:54 +00:00
Pascal Vizeli	c87ac63e9b	Update Some Boards to 4.19.68	2019-08-28 13:52:51 +00:00
Pascal Vizeli	28d262eecd	Add simple fb for 64bit	2019-08-28 13:16:50 +00:00
Pascal Vizeli	d1d3593d65	Fix boot (#459 ) * Fix permission check * Remove fails on copy * Disable FB_BCM2708 * Don't touch the memory map from first stage * bootcode.bin is not needed on rpi4	2019-08-28 10:32:46 +02:00
Pascal Vizeli	9f06ffbbd5	Rpi update (#457 ) * RaspberryPi: Update kernel 64f2b1b0a728a13373f9c74c6247ecf17af2caef * Update documentation & Script * Update firmware * Update bluetooth firmware * Update wifi driver	2019-08-24 14:57:16 +02:00
Pascal Vizeli	b963b1a587	Build: update script to do also commits	2019-08-23 15:39:09 +00:00
Pascal Vizeli	998c8365c0	OS: Update CLI 14	2019-08-23 15:38:29 +00:00
Pascal Vizeli	70e43c02fb	OS: Update supervisor 183	2019-08-23 15:37:39 +00:00
Ryan Bray	fed40532c1	rpi: Add USB boot support (#440 )	2019-07-23 14:28:22 +02:00
Alexey Pristavkin	08fac89fb0	Note that disk controller must be SATA not SCSI. (#424 ) The image hang on startup on the SCSI controller, which is the default controller type for custom VMs in VMWare Fusion.	2019-07-22 16:49:39 +02:00
Pascal Vizeli	e7da2e0779	Fix defconfig name for rpi zero (#436 )	2019-07-17 22:07:25 +02:00
Pascal Vizeli	3d999f8936	Update release-drafter.yml	2019-07-16 14:23:28 +02:00
Pascal Vizeli	b26d4bbb40	Pump version 3.4	2019-07-16 14:18:43 +02:00