Merge pull request #1034 from home-assistant/dev

Build fixes for Pre-Release 5.6

.github/ISSUE_TEMPLATE.md

@@ -1,32 +1,54 @@
 <!-- READ THIS FIRST:
 - If you need additional help with this template please refer to https://www.home-assistant.io/help/reporting_issues/
-- Make sure you are running the latest version before reporting an issue: https://github.com/home-assistant/home-assistant/releases
-- Do not report issues for components here, plaese refer to https://github.com/home-assistant/home-assistant/issues
+- Make sure you are running the latest version before reporting an issue: https://github.com/home-assistant/operating-system/releases
+- Do not report issues for integrations here, please refer to https://github.com/home-assistant/core/issues
+- Do not report issues for Add-Ons here, please refer to
+  Official Add-ons: https://github.com/home-assistant/addons/issues
+  Home Assistant Community Add-ons: https://github.com/hassio-addons/repository
 - This is for bugs only. Feature and enhancement requests should go in our community forum: https://community.home-assistant.io/c/feature-requests
-- Provide as many details as possible. Paste logs, configuration sample and code into the backticks. Do not delete any text from this template!
-- If you have a problem with a Add-on, make a issue on there repository.
+- Provide as many details as possible. Paste logs, configuration sample and code using blocks with three backticks. Do not delete text from this template!
+- Please add modifications to boot files, e.g. if you are using Raspberry Pi and did modifications in config.txt.
 -->
 
-**HassOS release with the issue:**
+**Hardware Environment**
 <!--
-- Frontend -> Developer tools -> Info
-- Or use this command: hass --version
+Describe the Homme Assistant image you are using and the hardare environemnt
+-->
+- [ ] Raspberry Pi [1/2/3/4]
+- [ ] ODROID [C2/C4/N2(+)/XU4]
+- [ ] ASUS Tinker [S]
+- [ ] Intel NUC (or compatible)
+- [ ] OVA (Open Virtualization Applicance, on Intel NUC or any other hardware, please add the Hypervisor you are using)
+
+**Home Assistant OS release:**
+- [ ] Fresh installation of release x.y
+- [ ] Updated from version x.y
+- Additional information (if accessible):
+<!--
+- Home Assistant Frontend -> Configuration -> Info (use the copy button in the System Health block)
+- Or use this command: `ha info`
 -->
 
 **Supervisor logs:**
 <!--
-- Frontend -> Hass.io -> System
+- Home Assistant Frontend -> Supervisor -> System (Log Provider Supervisor)
 - Or use this command: ha su logs
 -->
 
 **Journal logs:**
 <!--
-- use this command: journalctl
+- Enable SSH on OS level and login, then use `journalctl`
 -->
 
 **Kernel logs:**
 <!--
 - use this command: dmesg
+- Enable SSH on OS level and login, then use `dmesg`.
 -->
 
 **Description of problem:**
+<!--
+- Is the problem reproducible?
+- Has this been working before (is this a regression?)
+- Has there been attempt to rule out harware issues? (different SD card etc.)
+-->

.github/release-drafter.yml

@@ -1,16 +1,18 @@
 categories:
-  - title: 'HassOS Core'
+  - title: 'Home Assistant Operating System'
     label: 'os'
-  - title: 'Build'
+  - title: 'Build System'
     label: 'build'
   - title: 'Raspberry Pi'
     label: 'board/raspberrypi'
   - title: 'Open Virtual Appliance'
     label: 'board/ova'
-  - title: 'Intel-Nuc'
+  - title: 'Intel NUC'
     label: 'board/intel-nuc'
-  - title: 'Hardkernel'
+  - title: 'Hardkernel ODROID'
     label: 'board/hardkernel'
+  - title: 'ASUS Tinker'
+    label: 'board/tinker'
 template: |
   ## Changes
 

.github/workflows/dev.yml

@@ -0,0 +1,81 @@
+# Home Assistant Operating System build workflow
+
+name: Development build
+
+on:
+  workflow_dispatch:
+
+jobs:
+  version:
+
+    name: Generate version
+    runs-on: [ "ubuntu-20.04" ]
+    outputs:
+      version_dev: ${{ steps.version.outputs.version_dev }}
+    steps:
+      - name: Generate Development build version
+        shell: bash
+        id: version
+        run: |
+          version_dev="dev$(date --utc +'%Y%m%d')"
+          echo "Development version \"${version_dev}\""
+          echo "::set-output name=version_dev::${version_dev}"
+
+  build:
+    name: Release build for ${{ matrix.board.name }}
+    needs: version
+    strategy:
+      fail-fast: false
+      matrix:
+        board:
+          - {"name": "ova", "output": "ova", "runner": "x86-64-runner"}
+          - {"name": "intel_nuc", "output": "intel-nuc", "runner": "x86-64-runner"}
+          - {"name": "odroid_c2", "output": "odroid-c2", "runner": "aarch64-runner"}
+          - {"name": "odroid_c4", "output": "odroid-c4", "runner": "aarch64-runner"}
+          - {"name": "odroid_n2", "output": "odroid-n2", "runner": "aarch64-runner"}
+          - {"name": "odroid_xu4", "output": "odroid-xu4" , "runner": "aarch64-runner"}
+          - {"name": "rpi", "output": "rpi", "runner": "arm-runner"}
+          - {"name": "rpi0_w", "output": "rpi0-w", "runner": "arm-runner"}
+          - {"name": "rpi2", "output": "rpi2", "runner": "arm-runner"}
+          - {"name": "rpi3", "output": "rpi3", "runner": "arm-runner"}
+          - {"name": "rpi3_64", "output": "rpi3-64", "runner": "aarch64-runner"}
+          - {"name": "rpi4", "output": "rpi4", "runner": "arm-runner"}
+          - {"name": "rpi4_64", "output": "rpi4-64", "runner": "aarch64-runner"}
+          - {"name": "tinker", "output": "tinker", "runner": "arm-runner"}
+    runs-on: ${{ matrix.board.runner }}
+
+    steps:
+      # Checks-out your repository under $GITHUB_WORKSPACE, so your job can access it
+      - uses: actions/checkout@v2
+
+      - name: Build container
+        run: docker build -t haos-builder .
+
+      - name: 'Add release PKI certs'
+        env:
+          RAUC_CERTIFICATE: ${{ secrets.RAUC_CERTIFICATE }}
+          RAUC_PRIVATE_KEY: ${{ secrets.RAUC_PRIVATE_KEY }}
+        run: |
+          echo -e "-----BEGIN CERTIFICATE-----\n${RAUC_CERTIFICATE}\n-----END CERTIFICATE-----" > cert.pem
+          echo -e "-----BEGIN PRIVATE KEY-----\n${RAUC_PRIVATE_KEY}\n-----END PRIVATE KEY-----" > key.pem
+
+      - name: Build
+        run: |
+          BUILDER_UID="$(id -u)"
+          BUILDER_GID="$(id -g)"
+          docker run --rm --privileged -v "${GITHUB_WORKSPACE}:/build" \
+            -e BUILDER_UID="${BUILDER_UID}" -e BUILDER_GID="${BUILDER_GID}" \
+            -v "${{ matrix.board.runner }}-build-cache:/cache" \
+            haos-builder make VERSION_DEV=${{ needs.version.outputs.version_dev }} ${{ matrix.board.name }}
+
+      - name: Upload images
+        uses: appleboy/scp-action@master
+        with:
+          host: ${{ secrets.DEV_HOST }}
+          username: ${{ secrets.DEV_USERNAME }}
+          port: ${{ secrets.DEV_PORT }}
+          key: ${{ secrets.DEV_SCP_KEY }}
+          source: "release/*"
+          target: ${{ secrets.DEV_TARGET_PATH }}/${{ needs.version.outputs.version_dev }}/
+          strip_components: 1
+

.github/workflows/pr-checks.yml

@@ -0,0 +1,20 @@
+# Home Assistant Operating System pull-request checks
+
+name: PR checks
+
+on: [pull_request]
+
+jobs:
+  linters:
+    runs-on: ubuntu-20.04
+    steps:
+    - name: Check out code
+      uses: actions/checkout@v1
+    - name: Check Dockerfile
+      uses: brpaz/hadolint-action@v1.1.0
+      with:
+        dockerfile: Dockerfile
+    - name: Check shell scripts
+      uses: ludeeus/action-shellcheck@1.0.0
+      with:
+        ignore: "buildroot"

.github/workflows/release-drafter.yml

@@ -0,0 +1,15 @@
+name: Release Drafter
+
+on:
+  push:
+    branches:
+      - dev
+      - rel-4
+
+jobs:
+  update_release_draft:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: release-drafter/release-drafter@v5
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}

.github/workflows/release.yml

@@ -0,0 +1,158 @@
+# Home Assistant Operating System release build workflow
+
+name: Release build
+
+on:
+  release:
+    types: [published]
+
+jobs:
+  validate_release:
+    name: Validate release
+    runs-on: [ "ubuntu-20.04" ]
+    outputs:
+      version: ${{ steps.version_check.outputs.version }}
+    steps:
+      - uses: actions/checkout@v2
+      - name: Validate version
+        id: version_check
+        run: |
+          major=$(cat ${GITHUB_WORKSPACE}/buildroot-external/meta | grep VERSION_MAJOR | cut -d'=' -f2)
+          build=$(cat ${GITHUB_WORKSPACE}/buildroot-external/meta | grep VERSION_BUILD | cut -d'=' -f2)
+          if [ "${major}.${build}" != "${{ github.event.release.tag_name }}" ]; then
+            echo "Version number in Buildroot metadata is does not match tag (${major}.${build} vs ${{ github.event.release.tag_name }})."
+            exit 1
+          fi
+          echo "::set-output name=version::${major}.${build}"
+
+  build:
+    name: Release build for ${{ matrix.board.name }}
+    needs: validate_release
+    strategy:
+      matrix:
+        board:
+          - {"name": "ova", "output": "ova", "runner": "x86-64-runner"}
+          - {"name": "intel_nuc", "output": "intel-nuc", "runner": "x86-64-runner"}
+          - {"name": "odroid_c2", "output": "odroid-c2", "runner": "aarch64-runner"}
+          - {"name": "odroid_c4", "output": "odroid-c4", "runner": "aarch64-runner"}
+          - {"name": "odroid_n2", "output": "odroid-n2", "runner": "aarch64-runner"}
+          - {"name": "odroid_xu4", "output": "odroid-xu4" , "runner": "aarch64-runner"}
+          - {"name": "rpi", "output": "rpi", "runner": "arm-runner"}
+          - {"name": "rpi0_w", "output": "rpi0-w", "runner": "arm-runner"}
+          - {"name": "rpi2", "output": "rpi2", "runner": "arm-runner"}
+          - {"name": "rpi3", "output": "rpi3", "runner": "arm-runner"}
+          - {"name": "rpi3_64", "output": "rpi3-64", "runner": "aarch64-runner"}
+          - {"name": "rpi4", "output": "rpi4", "runner": "arm-runner"}
+          - {"name": "rpi4_64", "output": "rpi4-64", "runner": "aarch64-runner"}
+          - {"name": "tinker", "output": "tinker", "runner": "arm-runner"}
+    runs-on: ${{ matrix.board.runner }}
+
+    steps:
+      # Checks-out your repository under $GITHUB_WORKSPACE, so your job can access it
+      - uses: actions/checkout@v2
+
+      - name: Build container
+        run: docker build -t haos-builder .
+
+      - name: 'Add release PKI certs'
+        env:
+          RAUC_CERTIFICATE: ${{ secrets.RAUC_CERTIFICATE }}
+          RAUC_PRIVATE_KEY: ${{ secrets.RAUC_PRIVATE_KEY }}
+        run: |
+          echo -e "-----BEGIN CERTIFICATE-----\n${RAUC_CERTIFICATE}\n-----END CERTIFICATE-----" > cert.pem
+          echo -e "-----BEGIN PRIVATE KEY-----\n${RAUC_PRIVATE_KEY}\n-----END PRIVATE KEY-----" > key.pem
+
+      - name: Build
+        run: |
+          BUILDER_UID="$(id -u)"
+          BUILDER_GID="$(id -g)"
+          docker run --rm --privileged -v "${GITHUB_WORKSPACE}:/build" \
+            -e BUILDER_UID="${BUILDER_UID}" -e BUILDER_GID="${BUILDER_GID}" \
+            -v "${{ matrix.board.runner }}-build-cache:/cache" \
+            haos-builder make VERSION_DEV="" ${{ matrix.board.name }}
+
+      - name: Upload disk image
+        if: ${{ matrix.board.name != 'ova' }}
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+        with:
+          upload_url: ${{ github.event.release.upload_url }}
+          asset_path: ${{ github.workspace }}/release/hassos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.img.xz
+          asset_name: hassos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.img.xz
+          asset_content_type: application/x-xz
+
+      - name: Upload rauc update
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+        with:
+          upload_url: ${{ github.event.release.upload_url }}
+          asset_path: ${{ github.workspace }}/release/hassos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.raucb
+          asset_name: hassos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.raucb
+          asset_content_type: application/octet-stream
+
+      - name: Upload qcow2 image
+        if: ${{ matrix.board.name == 'ova' }}
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+        with:
+          upload_url: ${{ github.event.release.upload_url }}
+          asset_path: ${{ github.workspace }}/release/hassos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.qcow2.xz
+          asset_name: hassos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.qcow2.xz
+          asset_content_type: application/x-xz
+
+      - name: Upload vdi image
+        if: ${{ matrix.board.name == 'ova' }}
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+        with:
+          upload_url: ${{ github.event.release.upload_url }}
+          asset_path: ${{ github.workspace }}/release/hassos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.vdi.xz
+          asset_name: hassos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.vdi.xz
+          asset_content_type: application/x-xz
+
+      - name: Upload vhdx image
+        if: ${{ matrix.board.name == 'ova' }}
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+        with:
+          upload_url: ${{ github.event.release.upload_url }}
+          asset_path: ${{ github.workspace }}/release/hassos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.vhdx.xz
+          asset_name: hassos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.vhdx.xz
+          asset_content_type: application/x-xz
+
+      - name: Upload vmdk image
+        if: ${{ matrix.board.name == 'ova' }}
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+        with:
+          upload_url: ${{ github.event.release.upload_url }}
+          asset_path: ${{ github.workspace }}/release/hassos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.vmdk.xz
+          asset_name: hassos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.vmdk.xz
+          asset_content_type: application/x-xz
+
+  bump_version:
+    name: Bump dev version to ${{ needs.validate_release.outputs.version }}
+    needs: [ build, validate_release ]
+    runs-on: [ "ubuntu-20.04" ]
+
+    steps:
+    - name: Initialize git
+      uses: home-assistant/actions/helpers/git-init@master
+      with:
+        name: ${{ secrets.GIT_NAME }}
+        email: ${{ secrets.GIT_EMAIL }}
+        token: ${{ secrets.GIT_TOKEN }}
+
+    - name: Bump Home Assistant OS dev version
+      uses: home-assistant/actions/helpers/version-push@master
+      with:
+        key: "hassos[]"
+        key-description: "Home Assistant OS"
+        version: ${{ needs.validate_release.outputs.version }}
+        channel: "dev"

.gitignore

@@ -1,2 +1,3 @@
+.DS_Store
 /release
 *.pem

Dockerfile

@@ -38,6 +38,8 @@ RUN apt-get update && apt-get install -y --no-install-recommends \
         unzip \
         wget \
         qemu-utils \
+        openssh-client \
+        vim \
     && rm -rf /var/lib/apt/lists/*
 
 # Init entry

Documentation/README.md

@@ -3,7 +3,7 @@
 ## Contents
 
 - [Getting started](./getting_started_development.md) - the place for developers to begin
-- [Development](./getting_started_development.md) - more deatils for developers
+- [Development](./development.md) - more details for developers
 - [Deployment](./deployment.md) - approach to git branching and releases
 - [Configuration](./configuration.md) - how users can configure HassOS
 - [Partition](./partition.md) - partition layout

Documentation/boards/README.md

@@ -14,6 +14,7 @@ The following boards/devices are supported:
   - Pi (not recommended)
 - Hardkernel
   - Odroid-C2
+  - Odroid-C4 (_experimental_)
   - Odroid-N2
   - Odroid-XU4
 - Intel NUC
@@ -46,6 +47,7 @@ Notes:
 |Pi Zero     |`make rpi0_w`    |[rpi0_w](../../buildroot-external/configs/rpi0_w_defconfig)|[raspberrypi](./raspberrypi/)|
 |Pi          |`make rpi`       |[rpi](../../buildroot-external/configs/rpi_defconfig)|[raspberrypi](./raspberrypi/)|
 |Odroid-C2   |`make odroid_c2` |[odroid_c2](../../buildroot-external/configs/odroid_c2_defconfig)|[hardkernel](./hardkernel/)|
+|Odroid-C4   |`make odroid_c4` |[odroid_c4](../../buildroot-external/configs/odroid_c4_defconfig)|[hardkernel](./hardkernel/)|
 |Odroid-N2   |`make odroid_n2` |[odroid_n2](../../buildroot-external/configs/odroid_n2_defconfig)|[hardkernel](./hardkernel/)|
 |Odroid-XU4  |`make odroid_xu4`|[odroid_xu4](../../buildroot-external/configs/odroid_xu4_defconfig)|[hardkernel](./hardkernel/)|
 |NUC         |`make intel_nuc` |[intel_nuc](../../buildroot-external/configs/intel_nuc_defconfig)|[intel](./intel/)|

Documentation/boards/asus/README.md

@@ -5,16 +5,26 @@
 | Device         | Release Date  | Support | Config   |
 |----------------|---------------|---------|----------|
 | Tinker RK3288  | April 2017    | yes     | [tinker](../../../buildroot-external/configs/tinker_defconfig) |
-| Tinker S RK3288| January 2018  | yes?    | [tinker](../../../buildroot-external/configs/tinker_defconfig)? |
+| Tinker S RK3288| January 2018  | yes     | [tinker](../../../buildroot-external/configs/tinker_defconfig) |
 | Tinker Edge T  | November 2019 | no?     |          |
 | Tinker Edge R  | November 2019 | no?     |          |
 
-(? is the Tinker S supported?)
-<!--
 ## eMMC
 
-eMMC support is provided transparently. Just flash the image to the eMMC by connecting your Tinker Board S to your PC via Micro-USB.
--->
+eMMC support is provided with the same image. Just flash the image to the eMMC by connecting your Tinker Board S to your PC via Micro-USB. Refer to the Tinkerboard documentation how-to flash using Micro-USB and UMS.
+
+The Home Assistant OS provided U-Boot does support UMS as well,
+however manual intervention is necessary:
+
+ 1. Set the jumper between Micro-USB and HDMI the maskrom mode
+ 2. Insert SD card and connect the board via Micro-USB to your PC
+ 3. Continusly press Ctrl+C to interrupt boot
+ 4. Set the jumper back to the park position
+ 5. Start UMS using:
+```
+ums 0 mmc 0
+```
+ 6. A mass storage device should appear. Flash Home Assistant OS to it.
 
 ## Serial console
 

Documentation/boards/hardkernel/README.md

@@ -2,10 +2,11 @@
 
 ## Supported Hardware
 
-| Device         | Release Date  | Support | Config    |
-|----------------|---------------|---------|-----------|
-| ODROID-XU4     | 2015          | yes     | [odroid_xu4](../../../buildroot-external/configs/odroid_xu4_defconfig)|
-| ODROID-C2      | 2016          | yes     | [odroid_c2](../../../buildroot-external/configs/odroid_c2_defconfig) |
-| ODROID-N2      | 2019          | yes     | [odroid_n2](../../../buildroot-external/configs/odroid_n2_defconfig) |
+| Device         | Release Date  | Support      | Config    |
+|----------------|---------------|--------------|-----------|
+| ODROID-XU4     | 2015          | yes          | [odroid_xu4](../../../buildroot-external/configs/odroid_xu4_defconfig)|
+| ODROID-C2      | 2016          | yes          | [odroid_c2](../../../buildroot-external/configs/odroid_c2_defconfig) |
+| ODROID-C4      | 2020          | experimental | [odroid_c4](../../../buildroot-external/configs/odroid_c4_defconfig) |
+| ODROID-N2      | 2019          | yes          | [odroid_n2](../../../buildroot-external/configs/odroid_n2_defconfig) |
 
 See separate documentation for each board.

Documentation/boards/hardkernel/odroid-c4.md

@@ -0,0 +1,16 @@
+# Odroid-C4
+
+## Experimental
+
+Odroid-C4 support is based heavily on the Odroid-C2 and N2 configurations. Given the similarity of the SoCs, as well as the comparable level of support in the Linux kernel, the C4 should hopefully present few surprises. However, Home Assistant support should be regarded as experimental.
+
+Please also refer to the documentation pages for the [Odroid-C2](./odroid-c2.md) and [Odroid-N2](./odroid-n2.md), as some of that information may apply to the C4 as well.
+
+Common C4 issues that have been specifically tested and appear to be working:
+- boot from SD
+- boot from eMMC
+- MAC address obtained from eFuse
+
+## GPIO
+
+Refer to [the odroid wiki](https://wiki.odroid.com/odroid-c4/hardware/expansion_connectors).

Documentation/boards/raspberrypi/README.md

@@ -33,8 +33,13 @@ i2c-bcm2708
 
 ## USB Boot
 
-USB mass storage boot is available on Raspberry Pi 3B, 3B+, 3A+, and 2B v1.2.
-To enable USB boot, add `program_usb_boot_mode=1` into `config.txt`. Note that this **permanently** alters the one-time programmable memory of the device.
+USB mass storage boot is available on Raspberry Pi 4 (64-bit only), 3B, 3B+, 3A+, and 2B v1.2.
+
+For Raspberry 3B, 3A+ and 2B v1.2, to enable USB boot, add `program_usb_boot_mode=1` into `config.txt`. Note that this **permanently** alters the one-time programmable memory of the device.
+
+For Raspberry 4, make sure to update the bootloader to a stable release
+supporting USB mass storage boot (see
+[bcm2711_bootloader_config.md](https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2711_bootloader_config.md#usbmassstorageboot). If no SD card is used add `sd_poll_once=on` to `dtparam` in `config.txt` (comma separated). This gets rid of `mmc0: timeout waiting for hardware interrupt` kernel errors.
 
 For more information see [RaspberryPi](https://www.raspberrypi.org/documentation/hardware/raspberrypi/bootmodes/msd.md).
 
@@ -48,4 +53,4 @@ For more information see [RaspberryPi](https://www.raspberrypi.org/documentation
 
 If you don't need bluetooth, disabled it with add `dtoverlay=pi3-disable-bt` into `config.txt`.
 
-[config]: ../configuration.md#automatic
+[config]: ../../configuration.md#automatic

Documentation/configuration.md

@@ -59,4 +59,4 @@ FallbackNTP=0.pool.ntp.org 1.pool.ntp.org 2.pool.ntp.org 3.pool.ntp.org
 [systemd-modules]: https://www.freedesktop.org/software/systemd/man/modules-load.d.html
 [network.md]: network.md
 [hassos-release]: https://github.com/home-assistant/hassos/releases/
-[debug-homeassistant]: https://developers.home-assistant.io/docs/en/hassio_debugging.html
+[debug-homeassistant]: https://developers.home-assistant.io/docs/operating-system/debugging

Documentation/deployment.md

@@ -2,8 +2,8 @@
 
 We provide 3 different types of release builds:
 
-- development (beta/dev)
-- staging (rc)
+- development (dev)
+- staging (beta)
 - production (stable)
 
 ## Versioning
@@ -15,7 +15,7 @@ The development number they will be bump for the stable release version and the
 
 The branch `dev` ist the actual development branch and from there we never make a release. The `master` branch contains the development version and from there we build a beta release.
 
-If we create a new productive release, we create a new branch `rel-{MAJOR}`. They will be used for the whole cycle of this release.
+If we create a new productive/staging release, we create a new branch `rel-{MAJOR}`. They will be used for the whole cycle of this release.
 
 ## Upload release files
 

Documentation/development.md

@@ -36,6 +36,7 @@ Default 2. That is the size of end image in GB.
 
 - intel-nuc
 - odroid-c2
+- odroid-c4
 - odroid-n2
 - odroid-xu
 - qemuarm

Documentation/kernel.md

@@ -5,14 +5,15 @@ Default Kernel tree: 5.4
 
 | Board | Version |
 |-------|---------|
-| Open Virtual Appliance | 5.4.82 |
-| Raspberry Pi | 4.19.127 |
-| Raspberry Pi 0-W | 4.19.127 |
-| Raspberry Pi 2 | 4.19.127 |
-| Raspberry Pi 3 | 4.19.127 |
-| Raspberry Pi 4 | 4.19.127 |
-| Tinker Board | 5.4.82 |
-| Odroid-C2 | 5.7.19 |
-| Odroid-N2 | 5.7.19 |
-| Odroid-XU4 | 5.7.19 |
-| Intel NUC | 5.4.82 |
+| Open Virtual Appliance | 5.4.80 |
+| Raspberry Pi | 5.4.79 |
+| Raspberry Pi 0-W | 5.4.79 |
+| Raspberry Pi 2 | 5.4.79 |
+| Raspberry Pi 3 | 5.4.79 |
+| Raspberry Pi 4 | 5.4.79 |
+| Tinker Board | 5.4.80 |
+| Odroid-C2 | 5.9.11 |
+| Odroid-C4 | 5.9.11 |
+| Odroid-N2 | 5.9.11 |
+| Odroid-XU4 | 5.9.11 |
+| Intel NUC | 5.4.80 |

Documentation/network.md

@@ -1,6 +1,6 @@
 # Network
 
-HassOS uses NetworkManager to control the host network.
+Home Assistant Operating System uses NetworkManager to control the host network.
 
 ## Configure network
 
@@ -10,6 +10,8 @@ Only a manual configuration using NetworkManager connection files is supported.
 
 You can read the [NetworkManager manual][nm-manual] or find many configuration examples across the internet. Keep in mind that the system is read-only. If you don't want the IP address to change on every boot, you should modify the UUID property to a generic [UUID4][uuid]. Inside the `\CONFIG\network\` directory on the USB drive or SD card, create a file called `my-network` and add the appropriate contents below:
 
+**NOTE: Please make sure to save this file with UNIX line endings (LF, and not Windows' default CRLF endings). You can do this using Notepad these days!**
+
 ### Default
 
 A preinstalled connection profile is provided by default:
@@ -148,6 +150,6 @@ If you now view the default connection `cat /etc/NetworkManager/system-connectio
 
 Doing a `nmcli con reload` does not always work, so restart the virtual machine or the physical system.
 
-[nm-manual]: https://developer.gnome.org/NetworkManager/stable/nm-settings.html
+[nm-manual]: https://developer.gnome.org/NetworkManager/stable/NetworkManager.conf.html
 [configuration-usb]: configuration.md
 [uuid]: https://www.uuidgenerator.net/

Documentation/partition.md

@@ -1,8 +1,8 @@
 # Partition
 
-The partition layout is a bit different than for regular setups. We prefer GPT, if possible. With SoCs which don't support GPT, we use the hybrid GPT. For more details about this topic, please refer to the [development](development.mnd) documentation.
+The partition layout is a bit different than the typical setup. We prefer GPT, if possible. With SoCs which don't support GPT, we use a hybrid GPT. For more details about this topic, please refer to the [development](development.md) documentation.
 
-The system is designed to have as less as possible write operations on the storage media. Which means that we have basically only write during the OTA update and 5-6 times per week on the overlay part. The data partition is having I/O. This is the reason which is should be run on a different drive.
+The system is designed to have as few write operations to the storage media as possible. This means that we only write during the OTA updates and 5-6 times per week on the overlay partition. The data partition receives the main I/O operations and for this reason is ideal for placing on a different drive.
 
 A visual representation looks like this:
 
@@ -36,12 +36,25 @@ Sometime the bootloader part can look different because there can be firmware or
 
 ## Data
 
-The data partition is the only partition with real I/O. It will be expanded automatic on boot time to the full size of the disk.
+The data partition is the only partition with real I/O. It will be expanded automatically at boot to the full size of the disk.
 
-This partition can be offloaded to a different drive with the utility:
+
+## Using datactl to move the data partition.
+
+In a Home Assistant OS installation, the data is stored on the `/mnt/data` partition of the SD card. This is the only read+write partition on the SD drive. Using the `datactl` move command, this partition can be moved off of the SD card onto an externally connected drive, leaving the rest of the read-only system on the SD.
+
+The storage capacity of the external drive must be larger than the storage capacity of the existing SD card.
+
+The command needs to be run from the host console by either connecting a keyboard and monitor or making use of the [debug ssh access](https://developers.home-assistant.io/docs/operating-system/debugging/) over port 22222. The command will not work from within an SSH add-on container.
+
+Log in as `root` to get to the Home Assistant CLI and then enter `login` to continue to the host.
+
+Confirm your USB SSD/HD is connected and recognized using `fdisk -l`.
+
+Make sure the drive has no partition named `hassos-data` (or no partition at all). With the drive, use the below command (again, replacing XXX with your drive)
 
 ```sh
 $ datactl move /dev/xxx
 ```
 
-On next boot, the partition will be moved to the new drive. The drive needs to be bigger as the old one and we own the full new drive.
+Hit any key to continue, and then the move will happen after the next reboot. Once complete, the external drive will be owned and used by the system.

Makefile

@@ -3,10 +3,19 @@ RELEASE_DIR = /build/release
 BUILDROOT=/build/buildroot
 BUILDROOT_EXTERNAL=/build/buildroot-external
 DEFCONFIG_DIR = $(BUILDROOT_EXTERNAL)/configs
+VERSION_DATE := $(shell date --utc +'%Y%m%d')
+VERSION_DEV := "dev$(VERSION_DATE)"
 
 TARGETS := $(notdir $(patsubst %_defconfig,%,$(wildcard $(DEFCONFIG_DIR)/*_defconfig)))
 TARGETS_CONFIG := $(notdir $(patsubst %_defconfig,%-config,$(wildcard $(DEFCONFIG_DIR)/*_defconfig)))
 
+# Set O variable if not already done on the command line
+ifneq ("$(origin O)", "command line")
+O := $(BUILDROOT)/output
+else
+override O := $(BUILDROOT)/$(O)
+endif
+
 .NOTPARALLEL: $(TARGETS) $(TARGETS_CONFIG) all
 
 .PHONY: $(TARGETS) $(TARGETS_CONFIG) all clean help
@@ -22,8 +31,8 @@ $(TARGETS_CONFIG): %-config:
 
 $(TARGETS): %: $(RELEASE_DIR) %-config
 	@echo "build $@"
-	$(MAKE) -C $(BUILDROOT) BR2_EXTERNAL=$(BUILDROOT_EXTERNAL)
-	cp -f $(BUILDROOT)/output/images/hassos_* $(RELEASE_DIR)/
+	$(MAKE) -C $(BUILDROOT) BR2_EXTERNAL=$(BUILDROOT_EXTERNAL) VERSION_DEV=$(VERSION_DEV)
+	cp -f $(O)/images/hassos_* $(RELEASE_DIR)/
 
 	# Do not clean when building for one target
 ifneq ($(words $(filter $(TARGETS),$(MAKECMDGOALS))), 1)

README.md

@@ -20,7 +20,7 @@ Home Assistant Operating System uses Docker as Container engine. It by default d
 - Asus Tinker Board
 - Virtual appliances
 
-See full list and specific models [here](./Documentation/boards/README.md)
+See the full list and specific models [here](./Documentation/boards/README.md)
 
 ## Getting Started
 
@@ -45,8 +45,14 @@ If you're interested in finding out more about Home Assistant Operating System a
 - **Security:**
   - [AppArmor](https://apparmor.net/) Linux kernel security module
 
-If you don't have experience with these, embedded systems, buildroot or the build process for Linux distributions, then please read up on these topics. The rest of the documentation in this project is for developers and assumes you have experience of embedded systems or a strong understanding of the internal workings of operating systems.
+If you don't have experience with these, embedded systems, buildroot or the build process for Linux distributions, then please read up on these topics. The rest of the documentation in this project is for developers and assumes you have experience with embedded systems or a strong understanding of the internal workings of operating systems.
 
 ## Developer Documentation
 
 All developer documentation is in the [Documentation](./Documentation) directory.
+
+### Development builds
+
+The Development build GitHub Action Workflow is a manually triggered workflow
+which creates Home Assistant OS development builds. The development builds are
+available at [os-builds.home-assistant.io](https://os-builds.home-assistant.io/).

azure-pipelines-ci.yml

@@ -1,53 +0,0 @@
-# https://dev.azure.com/home-assistant
-
-trigger:
-  batch: true
-  branches:
-    include:
-    - dev
-pr:
-- dev
-
-variables:
-  - name: versionHadolint
-    value: 'v1.17.2'
-  - name: versionShellCheck
-    value: 'v0.7.0'
-
-jobs:
-
-- job: 'Hadolint'
-  pool:
-    vmImage: 'ubuntu-16.04'
-  steps:
-  - script: |
-      sudo docker pull hadolint/hadolint:$(versionHadolint)
-    displayName: 'Install Hadolint'
-  - script: |
-      sudo docker run --rm -i \
-        -v $(pwd)/.hadolint.yaml:/.hadolint.yaml:ro \
-        hadolint/hadolint:$(versionHadolint) < Dockerfile
-    displayName: 'Run Hadolint'
-
-
-- job: 'ShellCheck'
-  pool:
-    vmImage: 'ubuntu-16.04'
-  steps:
-  - script: |
-      sudo docker pull koalaman/shellcheck:$(versionShellCheck)
-    displayName: 'Install ShellCheck'
-  - script: |
-      set -e
-
-      # Check build script
-      sudo docker run --rm -i \
-        -v $(pwd):/mnt:ro koalaman/shellcheck:$(versionShellCheck) \
-          scripts/*.sh \
-          buildroot-external/scripts/*.sh \
-          buildroot-external/board/**/*.sh \
-          buildroot-external/ota/rauc-hook \
-          buildroot-external/rootfs-overlay/usr/bin/* \
-          buildroot-external/rootfs-overlay/usr/sbin/* \
-          buildroot-external/rootfs-overlay/usr/libexec/* \
-    displayName: 'Run ShellCheck'

azure-pipelines-release.yml

@@ -1,95 +0,0 @@
-# https://dev.azure.com/home-assistant
-
-trigger:
-  batch: true
-  tags:
-    include:
-    - '*'
-    exclude:
-    - untagged*
-pr: none
-
-variables:
-  - name: versionGHR
-    value: 'v0.13.0'
-  - group: github
-  - group: rauc
-
-jobs:
-
-- job: 'VersionValidate'
-  condition: startsWith(variables['Build.SourceBranch'], 'refs/tags')
-  pool:
-    vmImage: 'ubuntu-latest'
-  steps:
-  - script: |
-      . buildroot-external/meta
-
-      if [ "${VERSION_MAJOR}.${VERSION_BUILD}" != "$(Build.SourceBranchName)" ]; then
-        exit 1
-      fi
-    displayName: 'Check version of branch/tag'
-
-
-- job: 'Release'
-  dependsOn:
-  - 'VersionValidate'
-  timeoutInMinutes: 240
-  pool:
-    name: 'Buildroot'
-  strategy:
-    maxParallel: 1
-    matrix:
-      OdroidN2:
-        board: 'odroid_n2'
-      OdroidC2:
-        board: 'odroid_c2'
-      OdroidXU4:
-        board: 'odroid_xu4'
-      OpenVirtualAppliance:
-        board: 'ova'
-      IntelNuc:
-        board: 'intel_nuc'
-      RaspberryPi:
-        board: 'rpi'
-      RaspberryPi0-W:
-        board: 'rpi0_w'
-      RaspberryPi2:
-        board: 'rpi2'
-      RaspberryPi3:
-        board: 'rpi3'
-      RaspberryPi3-64:
-        board: 'rpi3_64'
-      RaspberryPi4:
-        board: 'rpi4'
-      RaspberryPi4-64:
-        board: 'rpi4_64'
-      AsusTinker:
-        board: 'tinker'
-  workspace:
-    clean: 'all'
-  steps:
-  - script: |
-      echo -e "-----BEGIN CERTIFICATE-----\n$(releaseCertificate)\n-----END CERTIFICATE-----" > cert.pem
-      echo -e "-----BEGIN PRIVATE KEY-----\n$(releaseKey)\n-----END PRIVATE KEY-----" > key.pem
-    displayName: 'Add release PKI certs'
-  - script: |
-      sudo docker build -t hassos:azure .
-    displayName: 'Build container for HassOS'
-  - script: |
-      curl -SsL https://github.com/tcnksm/ghr/releases/download/$(versionGHR)/ghr_$(versionGHR)_linux_amd64.tar.gz | tar xzf -
-      cp ghr_$(versionGHR)_linux_amd64/ghr .
-      rm -rf ghr_$(versionGHR)_linux_amd64
-    displayName: 'Install GHR'
-  - script: |
-      BUILDER_UID="$(id -u)"
-      BUILDER_GID="$(id -g)"
-
-      sudo docker run --rm --privileged -v "$(pwd):/build" \
-        -e BUILDER_UID="${BUILDER_UID}" -e BUILDER_GID="${BUILDER_GID}" \
-        -v "/mnt/build-cache:/cache" \
-        hassos:azure make $(board)
-    displayName: 'Build $(board)'
-  - script: |
-      ./ghr -t $(githubToken) -replace $(Build.SourceBranchName) release/
-    displayName: 'Upload $(board)'

buildroot-external/Config.in

@@ -1,8 +1,7 @@
 source "$BR2_EXTERNAL_HASSOS_PATH/package/hassio/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/libapparmor/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/apparmor/Config.in"
 source "$BR2_EXTERNAL_HASSOS_PATH/package/bluetooth-bcm43xx/Config.in"
 source "$BR2_EXTERNAL_HASSOS_PATH/package/bluetooth-rtl8723/Config.in"
 source "$BR2_EXTERNAL_HASSOS_PATH/package/hardkernel-boot/Config.in"
 source "$BR2_EXTERNAL_HASSOS_PATH/package/qemu-guest-agent/Config.in"
 source "$BR2_EXTERNAL_HASSOS_PATH/package/intel-e1000e/Config.in"
+source "$BR2_EXTERNAL_HASSOS_PATH/package/rpi-eeprom/Config.in"

buildroot-external/board/asus/hassos-hook.sh

@@ -7,23 +7,19 @@ function hassos_pre_image() {
 
     cp -t "${BOOT_DATA}" \
         "${BINARIES_DIR}/boot.scr" \
-        "${BINARIES_DIR}/rk3288-tinker.dtb"
+        "${BINARIES_DIR}/rk3288-tinker.dtb" \
+        "${BINARIES_DIR}/rk3288-tinker-s.dtb"
 
     echo "console=tty1" > "${BOOT_DATA}/cmdline.txt"
 
-    # Create boot binary
-    rm -f "${BINARIES_DIR}/idbloader.img"
-    mkimage -n rk3288 -T rksd -d "${BINARIES_DIR}/u-boot-tpl.bin" "${BINARIES_DIR}/idbloader.img"
-    cat "${BINARIES_DIR}/u-boot-spl.bin" >> "${BINARIES_DIR}/idbloader.img"
-
     # SPL
     create_spl_image
 
     dd if="${BINARIES_DIR}/idbloader.img" of="${SPL_IMG}" conv=notrunc bs=512 seek=64
-    dd if="${BINARIES_DIR}/u-boot-dtb.img" of="${SPL_IMG}" conv=notrunc bs=512 seek=12288
+    dd if="${BINARIES_DIR}/u-boot-dtb.img" of="${SPL_IMG}" conv=notrunc bs=512 seek=8192
 }
 
 
 function hassos_post_image() {
-    convert_disk_image_gz
+    convert_disk_image_xz
 }

buildroot-external/board/asus/tinker/patches/linux/0001-ARM-DTS-rk3288-tinker-Setup-the-Bluetooth-UART-pins.patch

@@ -1,7 +1,8 @@
-From 2c2e60256f2cbb2fce50a6317f85b1500efd1a6c Mon Sep 17 00:00:00 2001
+From 2ae3821fd824560ef2db3c87cfbec985177911f6 Mon Sep 17 00:00:00 2001
+Message-Id: <2ae3821fd824560ef2db3c87cfbec985177911f6.1599249626.git.stefan@agner.ch>
 From: "Miouyouyou (Myy)" <myy@miouyouyou.fr>
 Date: Mon, 5 Nov 2018 22:03:26 +0100
-Subject: [PATCH] ARM: DTS: rk3288-tinker: Setup the Bluetooth UART pins
+Subject: [PATCH 1/2] ARM: DTS: rk3288-tinker: Setup the Bluetooth UART pins
 
 The most essential being the RTS pin, which is clearly needed to
 upload the initial configuration into the Realtek Bluetooth
@@ -39,24 +40,25 @@ echo 1 > value &&
 sleep 1
 
 Signed-off-by: Miouyouyou (Myy) <myy@miouyouyou.fr>
+[move change to rk3288-tinker.dtsi]
+Signed-off-by: Stefan Agner <stefan@agner.ch>
 ---
- arch/arm/boot/dts/rk3288-tinker.dts | 6 ++++++
- 1 file changed, 6 insertions(+)
+ arch/arm/boot/dts/rk3288-tinker.dtsi | 2 ++
+ 1 file changed, 2 insertions(+)
 
-diff --git a/arch/arm/boot/dts/rk3288-tinker.dts b/arch/arm/boot/dts/rk3288-tinker.dts
-index d4df13bed..b92e59c1e 100644
---- a/arch/arm/boot/dts/rk3288-tinker.dts
-+++ b/arch/arm/boot/dts/rk3288-tinker.dts
-@@ -73,3 +73,9 @@
- 	status = "okay";
- 	supports-sdio;
+diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
+index acfaa12ec239..284e7982925d 100644
+--- a/arch/arm/boot/dts/rk3288-tinker.dtsi
++++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
+@@ -492,6 +492,8 @@ &tsadc {
  };
-+
-+&uart0 {
+ 
+ &uart0 {
 +	pinctrl-names = "default";
 +	pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>;
-+};
-+
+ 	status = "okay";
+ };
+ 
 -- 
-2.16.4
+2.28.0
 

buildroot-external/board/asus/tinker/patches/linux/0002-ARM-DTS-rk3288-tinker-Defining-the-SPI-interface.patch

@@ -0,0 +1,55 @@
+From fc25c993bf2feb6e66d55bf03eb725ec688e47eb Mon Sep 17 00:00:00 2001
+Message-Id: <fc25c993bf2feb6e66d55bf03eb725ec688e47eb.1599250914.git.stefan@agner.ch>
+In-Reply-To: <2ae3821fd824560ef2db3c87cfbec985177911f6.1599250914.git.stefan@agner.ch>
+References: <2ae3821fd824560ef2db3c87cfbec985177911f6.1599250914.git.stefan@agner.ch>
+From: "Miouyouyou (Myy)" <myy@miouyouyou.fr>
+Date: Mon, 5 Nov 2018 22:15:14 +0100
+Subject: [PATCH 2/3] ARM: DTS: rk3288-tinker: Defining the SPI interface
+
+Taken from, and tested by @TonyMac32 .
+
+Well, the original one was tested by him but I had to adapt the
+registers definitions to the new 64-bits LPAE-compliant syntax.
+
+Therefore that *might* break, along with a few other patches.
+
+Signed-off-by: Miouyouyou (Myy) <myy@miouyouyou.fr>
+[move change to rk3288-tinker.dtsi]
+Signed-off-by: Stefan Agner <stefan@agner.ch>
+---
+ arch/arm/boot/dts/rk3288-tinker.dtsi | 19 +++++++++++++++++++
+ 1 file changed, 19 insertions(+)
+
+diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
+index 284e7982925d..d6cc66ab5bb1 100644
+--- a/arch/arm/boot/dts/rk3288-tinker.dtsi
++++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
+@@ -485,6 +485,25 @@ &sdio0 {
+ 	status = "okay";
+ };
+ 
++&spi2 {
++	max-freq = <50000000>;
++	status = "okay";
++
++	spidev@0 {
++		compatible = "rockchip,spi_tinker";
++		reg = <0x0 0>;
++		spi-max-frequency = <50000000>;
++		spi-cpha = <1>;
++	};
++
++	spidev@1 {
++		compatible = "rockchip,spi_tinker";
++		reg = <0x1>;
++		spi-max-frequency = <50000000>;
++		spi-cpha = <1>;
++	};
++};
++
+ &tsadc {
+ 	rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
+ 	rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
+-- 
+2.28.0
+

buildroot-external/board/asus/tinker/patches/linux/0003-ARM-dts-rockchip-enable-I2C1-4-on-rk3288-tinker.patch

@@ -0,0 +1,41 @@
+From 3a9d71847ae869ffdb2b0818aa86a36d57d96331 Mon Sep 17 00:00:00 2001
+Message-Id: <3a9d71847ae869ffdb2b0818aa86a36d57d96331.1599250914.git.stefan@agner.ch>
+In-Reply-To: <2ae3821fd824560ef2db3c87cfbec985177911f6.1599250914.git.stefan@agner.ch>
+References: <2ae3821fd824560ef2db3c87cfbec985177911f6.1599250914.git.stefan@agner.ch>
+From: Stefan Agner <stefan@agner.ch>
+Date: Fri, 4 Sep 2020 21:57:55 +0200
+Subject: [PATCH 3/3] ARM: dts: rockchip: enable I2C1/4 on rk3288-tinker
+
+Enable I2C devices which are accessible via 40-pin header.
+
+Signed-off-by: Stefan Agner <stefan@agner.ch>
+---
+ arch/arm/boot/dts/rk3288-tinker.dtsi | 8 ++++++++
+ 1 file changed, 8 insertions(+)
+
+diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
+index d6cc66ab5bb1..7af5818ac77c 100644
+--- a/arch/arm/boot/dts/rk3288-tinker.dtsi
++++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
+@@ -344,10 +344,18 @@ regulator-state-mem {
+ 	};
+ };
+ 
++&i2c1 {
++	status = "okay";
++};
++
+ &i2c2 {
+ 	status = "okay";
+ };
+ 
++&i2c4 {
++	status = "okay";
++};
++
+ &i2c5 {
+ 	status = "okay";
+ };
+-- 
+2.28.0
+

buildroot-external/board/asus/tinker/patches/linux/1-2-regulator-act8865-add-restart-handler-for-act8846.patch

@@ -1,74 +0,0 @@
-Patches act8846 regulator providing the proper reset handle and exploit
-the SIPC bit in GLB_POWER_OFF register. Mainly used to reset some rockchip
-boards.
-
-Origin: <https://patchwork.kernel.org/patch/6409521/>
-
-diff --git a/drivers/regulator/act8865-regulator.c b/drivers/regulator/act8865-regulator.c
-index 2ff73d7..836d10b 100644
---- a/drivers/regulator/act8865-regulator.c
-+++ b/drivers/regulator/act8865-regulator.c
-@@ -27,6 +27,7 @@
- #include <linux/regulator/of_regulator.h>
- #include <linux/regmap.h>
- #include <dt-bindings/regulator/active-semi,8865-regulator.h>
-+#include <linux/reboot.h>
- 
- /*
-  * ACT8600 Global Register Map.
-@@ -133,6 +134,8 @@
- #define	ACT8865_VOLTAGE_NUM	64
- #define ACT8600_SUDCDC_VOLTAGE_NUM	255
- 
-+#define ACT8846_SIPC_MASK 0x01
-+
- struct act8865 {
- 	struct regmap *regmap;
- 	int off_reg;
-@@ -402,6 +405,22 @@ static void act8865_power_off(void)
- 	while (1);
- }
- 
-+static int act8846_power_cycle(struct notifier_block *this,
-+	unsigned long code, void *unused)
-+{
-+	struct act8865 *act8846;
-+
-+	act8846 = i2c_get_clientdata(act8865_i2c_client);
-+	regmap_write(act8846->regmap, ACT8846_GLB_OFF_CTRL, ACT8846_SIPC_MASK);
-+
-+	return NOTIFY_DONE;
-+}
-+
-+static struct notifier_block act8846_restart_handler = {
-+	.notifier_call = act8846_power_cycle,
-+	.priority = 129,
-+};
-+
- static int act8865_pmic_probe(struct i2c_client *client,
- 			      const struct i2c_device_id *i2c_id)
- {
-@@ -484,6 +503,8 @@ static int act8865_pmic_probe(struct i2c_client *client,
- 	}
- 
- 	if (of_device_is_system_power_controller(dev->of_node)) {
-+		int ret;
-+
- 		if (!pm_power_off && (off_reg > 0)) {
- 			act8865_i2c_client = client;
- 			act8865->off_reg = off_reg;
-@@ -492,6 +513,14 @@ static int act8865_pmic_probe(struct i2c_client *client,
- 		} else {
- 			dev_err(dev, "Failed to set poweroff capability, already defined\n");
- 		}
-+
-+		if (type == ACT8846) {
-+			act8865_i2c_client = client;
-+			ret = register_restart_handler(&act8846_restart_handler);
-+			if (ret)
-+				pr_err("%s: cannot register restart handler, %d\n",
-+					__func__, ret);
-+		}
- 	}
- 
- 	/* Finally register devices */

buildroot-external/board/asus/tinker/patches/linux/1001-dts-rk3288-miqi-Enabling-the-Mali-GPU-node.patch

@@ -1,35 +0,0 @@
-From 604ea7fc311af2b3a41e7fe3b4fbde0ee03dfb9c Mon Sep 17 00:00:00 2001
-From: Myy Miouyouyou <myy@miouyouyou.fr>
-Date: Thu, 19 Oct 2017 21:09:50 +0200
-Subject: [PATCH 04/28] dts: rk3288: miqi: Enabling the Mali GPU node
-
-Why is the MiQi the only one left without a working mali GPU node ?
-
-Seriously, is there a rk3288 chipset WITHOUT a mali GPU ? Couldn't
-they enable it once in the DTSI, instead of defining it as "disabled"
-and enabling it in every DTS file ?
-
-Signed-off-by: Myy Miouyouyou <myy@miouyouyou.fr>
----
- arch/arm/boot/dts/rk3288-miqi.dts | 5 +++++
- 1 file changed, 5 insertions(+)
-
-diff --git a/arch/arm/boot/dts/rk3288-miqi.dts b/arch/arm/boot/dts/rk3288-miqi.dts
-index 4d923aa6..3cd60674 100644
---- a/arch/arm/boot/dts/rk3288-miqi.dts
-+++ b/arch/arm/boot/dts/rk3288-miqi.dts
-@@ -149,6 +149,11 @@
- 	status = "ok";
- };
- 
-+&gpu {
-+	mali-supply = <&vdd_gpu>;
-+	status = "okay";
-+};
-+
- &hdmi {
- 	ddc-i2c-bus = <&i2c5>;
- 	status = "okay";
--- 
-2.11.0
-

buildroot-external/board/asus/tinker/patches/linux/1002-ARM-dts-rockchip-fix-the-regulator-s-voltage-range-o.patch

@@ -1,45 +0,0 @@
-From 89e5763110ca77d68a4be00cd97a638adc2401d5 Mon Sep 17 00:00:00 2001
-From: Willy Tarreau <w@1wt.eu>
-Date: Tue, 2 Aug 2016 08:31:00 +0200
-Subject: [PATCH 05/28] ARM: dts: rockchip: fix the regulator's voltage range
- on MiQi board
-
-The board declared too narrow a voltage range for the CPU and GPU
-regulators, preventing it from using the full CPU frequency range.
-The regulators support 712500 to 1500000 microvolts.
-
-Signed-off-by: Willy Tarreau <w@1wt.eu>
-(cherry picked from commit 95330e63a9295a2632cee8cce5db80677f01857a)
----
- arch/arm/boot/dts/rk3288-miqi.dts | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
-diff --git a/arch/arm/boot/dts/rk3288-miqi.dts b/arch/arm/boot/dts/rk3288-miqi.dts
-index 3cd60674..a1c3cdaa 100644
---- a/arch/arm/boot/dts/rk3288-miqi.dts
-+++ b/arch/arm/boot/dts/rk3288-miqi.dts
-@@ -168,8 +168,8 @@
- 		fcs,suspend-voltage-selector = <1>;
- 		reg = <0x40>;
- 		regulator-name = "vdd_cpu";
--		regulator-min-microvolt = <850000>;
--		regulator-max-microvolt = <1350000>;
-+		regulator-min-microvolt = <712500>;
-+		regulator-max-microvolt = <1500000>;
- 		regulator-always-on;
- 		regulator-boot-on;
- 		regulator-enable-ramp-delay = <300>;
-@@ -182,8 +182,8 @@
- 		fcs,suspend-voltage-selector = <1>;
- 		reg = <0x41>;
- 		regulator-name = "vdd_gpu";
--		regulator-min-microvolt = <850000>;
--		regulator-max-microvolt = <1350000>;
-+		regulator-min-microvolt = <712500>;
-+		regulator-max-microvolt = <1500000>;
- 		regulator-always-on;
- 		vin-supply = <&vcc_sys>;
- 	};
--- 
-2.11.0
-

buildroot-external/board/asus/tinker/patches/linux/1003-ARM-dts-rockchip-add-the-MiQi-board-s-fan-definition.patch

@@ -1,46 +0,0 @@
-From c27e445527e949f3ef46d5326066196969c17d23 Mon Sep 17 00:00:00 2001
-From: Myy <myy@miouyouyou.fr>
-Date: Sun, 12 Mar 2017 19:43:15 +0000
-Subject: [PATCH 06/28] ARM: dts: rockchip: add the MiQi board's fan definition
-
-The MiQi board is sold with an enclosure in which a fan is connected
-to the second LED output, and configured by default in "heartbeat"
-mode so that it rotates slowly and increases when the CPU load
-increases, ensuring appropriate cooling by default. This LED output
-is called "Fan" in the original kernel and connected to GPIO18
-(gpiochip 0, pin 18). Here we called it "miqi:green:fan" to stay
-consistent with the kernel's naming conventions.
-
-It's worth noting that without this patch the fan doesn't work at
-all, risking to make the board overheat.
-
-Fixes: 162718c (v4.7)
-Cc: Heiko Stuebner <heiko@sntech.de>
-Signed-off-by: Willy Tarreau <w@1wt.eu>
-
-Signed-off-by: Myy <myy@miouyouyou.fr>
----
- arch/arm/boot/dts/rk3288-miqi.dts | 7 +++++++
- 1 file changed, 7 insertions(+)
-
-diff --git a/arch/arm/boot/dts/rk3288-miqi.dts b/arch/arm/boot/dts/rk3288-miqi.dts
-index a1c3cdaa..0e383595 100644
---- a/arch/arm/boot/dts/rk3288-miqi.dts
-+++ b/arch/arm/boot/dts/rk3288-miqi.dts
-@@ -67,6 +67,13 @@
- 	leds {
- 		compatible = "gpio-leds";
- 
-+		fan {
-+			gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
-+			label = "miqi:green:fan";
-+			linux,default-trigger = "heartbeat";
-+		};
-+
-+
- 		work {
- 			gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>;
- 			label = "miqi:green:user";
--- 
-2.11.0
-

buildroot-external/board/asus/tinker/patches/linux/1013-ARM-DTS-rk3288-tinker-Enabling-SDIO-and-Wifi.patch

@@ -1,98 +0,0 @@
-From d5d5c53173c484a13cda62a537cbf75a5df4b0e4 Mon Sep 17 00:00:00 2001
-From: "Miouyouyou (Myy)" <myy@miouyouyou.fr>
-Date: Mon, 5 Nov 2018 21:58:56 +0100
-Subject: [PATCH] ARM: DTS: rk3288-tinker: Enabling SDIO and Wifi
-
-Adding the appropriate nodes in order to exploit the WiFi capabilities
-of the board.
-Since these capabilities are provided through SDIO, and the SDIO
-nodes were not defined, these were added too.
-
-These seems to depend on each other so they are added in one big
-patch.
-
-Split if necessary.
-
-Signed-off-by: Miouyouyou (Myy) <myy@miouyouyou.fr>
----
- arch/arm/boot/dts/rk3288-tinker.dts | 62 +++++++++++++++++++++++++++++++++++++
- 1 file changed, 62 insertions(+)
-
-diff --git a/arch/arm/boot/dts/rk3288-tinker.dts b/arch/arm/boot/dts/rk3288-tinker.dts
-index 1e43527aa..d4df13bed 100644
---- a/arch/arm/boot/dts/rk3288-tinker.dts
-+++ b/arch/arm/boot/dts/rk3288-tinker.dts
-@@ -6,8 +6,70 @@
- /dts-v1/;
- 
- #include "rk3288-tinker.dtsi"
-+#include <dt-bindings/clock/rockchip,rk808.h>
- 
- / {
- 	model = "Rockchip RK3288 Asus Tinker Board";
- 	compatible = "asus,rk3288-tinker", "rockchip,rk3288";
-+
-+	/* This is essential to get SDIO devices working.
-+	   The Wifi depends on SDIO ! */
-+	sdio_pwrseq: sdio-pwrseq {
-+		compatible = "mmc-pwrseq-simple";
-+		clocks = <&rk808 RK808_CLKOUT1>;
-+		clock-names = "ext_clock";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&chip_enable_h>, <&wifi_enable_h>;
-+
-+		/*
-+		 * On the module itself this is one of these (depending
-+		 * on the actual card populated):
-+		 * - SDIO_RESET_L_WL_REG_ON
-+		 * - PDN (power down when low)
-+		 */
-+		reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>, <&gpio4 27 GPIO_ACTIVE_LOW>;
-+	};
-+
-+	wireless-wlan {
-+		compatible = "wlan-platdata";
-+		rockchip,grf = <&grf>;
-+		sdio_vref = <1800>;
-+		status = "okay";
-+		wifi_chip_type = "8723bs";
-+		WIFI,host_wake_irq = <&gpio4 30 GPIO_ACTIVE_HIGH>;
-+	};
-+};
-+
-+&io_domains {
-+	wifi-supply = <&vcc_18>;
-+};
-+
-+&pinctrl {
-+	sdio-pwrseq {
-+		wifi_enable_h: wifienable-h {
-+			rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+
-+		chip_enable_h: chip-enable-h {
-+			rockchip,pins = <4 27 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+	};
-+};
-+
-+&sdio0 {
-+	bus-width = <4>;
-+	cap-sd-highspeed;
-+	cap-sdio-irq;
-+	clock-frequency = <50000000>;
-+	clock-freq-min-max = <200000 50000000>;
-+	disable-wp;
-+	keep-power-in-suspend;
-+	mmc-pwrseq = <&sdio_pwrseq>;
-+	non-removable;
-+	num-slots = <1>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
-+	sd-uhs-sdr104;
-+	status = "okay";
-+	supports-sdio;
- };
--- 
-2.16.4
-

buildroot-external/board/asus/tinker/patches/linux/1017-ARM-DTS-rk3288-tinker-Defined-the-I2C-interfaces.patch

@@ -1,53 +0,0 @@
-From a72e0749acad92df7b854e38e97e1dc7b4799abe Mon Sep 17 00:00:00 2001
-From: "Miouyouyou (Myy)" <myy@miouyouyou.fr>
-Date: Mon, 5 Nov 2018 22:11:24 +0100
-Subject: [PATCH] ARM: DTS: rk3288-tinker: Defined the I2C interfaces
-
-And all the hardware behind.
-
-Taken from @TonyMac32, Butchered by @Miouyouyou .
-
-Signed-off-by: Miouyouyou (Myy) <myy@miouyouyou.fr>
----
- arch/arm/boot/dts/rk3288-tinker.dts | 25 +++++++++++++++++++++++++
- 1 file changed, 25 insertions(+)
-
-diff --git a/arch/arm/boot/dts/rk3288-tinker.dts b/arch/arm/boot/dts/rk3288-tinker.dts
-index b92e59c1e..96d05fc6b 100644
---- a/arch/arm/boot/dts/rk3288-tinker.dts
-+++ b/arch/arm/boot/dts/rk3288-tinker.dts
-@@ -40,6 +40,31 @@
- 	};
- };
- 
-+&i2c1 {
-+	status = "okay";
-+};
-+
-+&i2c2 {
-+	afc0:af-controller@0 {
-+		status = "okay";
-+		compatible = "silicon touch,vm149C-v4l2-i2c-subdev";
-+		reg = <0x0 0x0c>;
-+	};
-+
-+	eeprom:m24c08@50 {
-+		compatible = "at,24c08";
-+		reg = <0x50>;
-+	};
-+};
-+
-+&i2c3 {
-+	status = "okay";
-+};
-+
-+&i2c4 {
-+	status = "okay";
-+};
-+
- &io_domains {
- 	wifi-supply = <&vcc_18>;
- };
--- 
-2.16.4
-

buildroot-external/board/asus/tinker/patches/linux/1018-ARM-DTS-rk3288-tinker-Defining-the-SPI-interface.patch

@@ -1,50 +0,0 @@
-From b24b8f83e150811ad54ee2a4843e44cd1421fafa Mon Sep 17 00:00:00 2001
-From: "Miouyouyou (Myy)" <myy@miouyouyou.fr>
-Date: Mon, 5 Nov 2018 22:15:14 +0100
-Subject: [PATCH] ARM: DTS: rk3288-tinker: Defining the SPI interface
-
-Taken from, and tested by @TonyMac32 .
-
-Well, the original one was tested by him but I had to adapt the
-registers definitions to the new 64-bits LPAE-compliant syntax.
-
-Therefore that *might* break, along with a few other patches.
-
-Signed-off-by: Miouyouyou (Myy) <myy@miouyouyou.fr>
----
- arch/arm/boot/dts/rk3288-tinker.dts | 19 +++++++++++++++++++
- 1 file changed, 19 insertions(+)
-
-diff --git a/arch/arm/boot/dts/rk3288-tinker.dts b/arch/arm/boot/dts/rk3288-tinker.dts
-index 96d05fc6b..17bfea298 100644
---- a/arch/arm/boot/dts/rk3288-tinker.dts
-+++ b/arch/arm/boot/dts/rk3288-tinker.dts
-@@ -99,6 +99,25 @@
- 	supports-sdio;
- };
- 
-+&spi2 {
-+	max-freq = <50000000>;
-+	status = "okay";
-+
-+	spidev@0 {
-+		compatible = "rockchip,spi_tinker";
-+		reg = <0x0 0>;
-+		spi-max-frequency = <50000000>;
-+		spi-cpha = <1>;
-+	};
-+
-+	spidev@1 {
-+		compatible = "rockchip,spi_tinker";
-+		reg = <0x1>;
-+		spi-max-frequency = <50000000>;
-+		spi-cpha = <1>;
-+	};
-+};
-+
- &uart0 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>;
--- 
-2.16.4
-

buildroot-external/board/asus/tinker/patches/linux/1024-arm-dts-veyron-Added-a-flag-to-disable-cache-flush-d.patch

@@ -1,32 +0,0 @@
-From 9177b30ab083dbda2bede3b3d61ef71ad4b1ffe0 Mon Sep 17 00:00:00 2001
-From: "Miouyouyou (Myy)" <myy@miouyouyou.fr>
-Date: Thu, 1 Nov 2018 21:31:26 +0100
-Subject: [PATCH 2/2] arm: dts: veyron: Added a flag to disable cache flush
- during reset
-
-Flushing the MMC cache of ASUS Chromebooks during initialization or
-"recovery" generates 10 minutes hangup, according to @SolidHal.
-
-This is an adaptation of @SolidHal, in order to pinpoint the fix to
-Veyron Chromebooks, and avoiding issues other RK3288 boards.
-
-Signed-off-by: Miouyouyou (Myy) <myy@miouyouyou.fr>
----
- arch/arm/boot/dts/rk3288-veyron.dtsi | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi
-index 2075120cf..fa4951fd7 100644
---- a/arch/arm/boot/dts/rk3288-veyron.dtsi
-+++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
-@@ -123,6 +123,7 @@
- 	mmc-hs200-1_8v;
- 	mmc-pwrseq = <&emmc_pwrseq>;
- 	non-removable;
-+	no-recovery-cache-flush;
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
- };
--- 
-2.16.4
-

buildroot-external/board/asus/tinker/patches/linux/board-tinkerboard-enable-emmc-support.patch

@@ -1,25 +0,0 @@
-diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
-index f88c913ff..7f04ccbdf 100644
---- a/arch/arm/boot/dts/rk3288-tinker.dtsi
-+++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
-@@ -547,3 +547,20 @@
- &gpiomem {
-     status = "okay";
- };
-+
-+&emmc {
-+    bus-width = <8>;
-+    cap-mmc-highspeed;
-+    non-removable;
-+    pinctrl-names = "default";
-+    pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
-+    max-frequency = <150000000>;
-+    mmc-hs200-1_8v;
-+    mmc-ddr-1_8v;
-+    status = "okay";
-+};
-+
-+&hdmi {
-+    pinctrl-names = "default";
-+    pinctrl-0 = <&hdmi_cec_c0>;
-+};

buildroot-external/board/asus/tinker/patches/linux/xt-q8l-v10-add-dts-makefile.patch

@@ -1,13 +0,0 @@
-diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
-index 37a3de760..6bcfceede 100644
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -832,6 +832,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
- 	rk3188-radxarock.dtb \
- 	rk3228-evb.dtb \
- 	rk3229-evb.dtb \
-+	rk3288-xt-q8l-v10.dtb \
- 	rk3229-xms6.dtb \
- 	rk3288-evb-act8846.dtb \
- 	rk3288-evb-rk808.dtb \
-

buildroot-external/board/asus/tinker/patches/linux/xt-q8l-v10-remote-keymap.patch

@@ -1,103 +0,0 @@
-diff --git a/drivers/media/rc/keymaps/rc-xt-q8l-v10.c b/drivers/media/rc/keymaps/rc-xt-q8l-v10.c
-index e69de29..19c7d9e 100644
---- /dev/null
-+++ b/drivers/media/rc/keymaps/rc-xt-q8l-v10.c
-@@ -0,0 +1,76 @@
-+// SPDX-License-Identifier: GPL-2.0+
-+// rc-xt-q8l-v10.c - Keytable for xt-q8l-v10 tv box remote controller
-+//
-+// keymap imported from ir-keymaps.c
-+//
-+// Copyright (c) 2018 Paolo Sabatino
-+
-+#include <media/rc-map.h>
-+#include <linux/module.h>
-+
-+/*
-+
-+*/
-+
-+static struct rc_map_table xt_q8l_v10[] = {
-+	
-+	{ 0xcc1d11, KEY_ENTER },
-+	{ 0xcc1d00, KEY_POWER },
-+	{ 0xcc1d15, KEY_PLAYPAUSE },
-+	{ 0xcc1d16, KEY_STOP },
-+	{ 0xcc1d06, KEY_PREVIOUSSONG },
-+	{ 0xcc1d0a, KEY_NEXTSONG },
-+	{ 0xcc1d41, KEY_1 },
-+	{ 0xcc1d45, KEY_2 },
-+	{ 0xcc1d4d, KEY_3 },
-+	{ 0xcc1d42, KEY_4 },
-+	{ 0xcc1d46, KEY_5 },
-+	{ 0xcc1d4e, KEY_6 },
-+	{ 0xcc1d43, KEY_7 },
-+	{ 0xcc1d47, KEY_8 },
-+	{ 0xcc1d4f, KEY_9 },
-+	{ 0xcc1d49, KEY_0 },
-+	{ 0xcc1d4a, KEY_BACKSPACE },
-+	{ 0xcc1d48, KEY_F6 },
-+	{ 0xcc1d03, KEY_HOME },
-+	{ 0xcc1d0f, KEY_BACK },
-+	{ 0xcc1d40, KEY_MENU },
-+	{ 0xcc1d4c, KEY_TEXT },
-+	{ 0xcc1d10, KEY_LEFT },
-+	{ 0xcc1d12, KEY_RIGHT },
-+	{ 0xcc1d44, KEY_DOWN },
-+	{ 0xcc1d07, KEY_UP },
-+	{ 0xcc1d02, KEY_VOLUMEDOWN },
-+	{ 0xcc1d0c, KEY_MUTE },
-+	{ 0xcc1d0e, KEY_VOLUMEUP },
-+	{ 0xcc1d01, KEY_F1 },
-+	{ 0xcc1d05, KEY_F2 },
-+	{ 0xcc1d09, KEY_F3 },
-+	{ 0xcc1d0d, KEY_F4 },
-+	
-+};
-+
-+static struct rc_map_list xt_q8l_v10_map = {
-+	.map = {
-+		.scan     = xt_q8l_v10,
-+		.size     = ARRAY_SIZE(xt_q8l_v10),
-+		.rc_proto = RC_PROTO_NEC,	/* Legacy IR type */
-+		.name     = RC_MAP_XT_Q8L_V10,
-+	}
-+};
-+
-+static int __init init_rc_map_xt_q8l_v10(void)
-+{
-+	return rc_map_register(&xt_q8l_v10_map);
-+}
-+
-+static void __exit exit_rc_map_xt_q8l_v10(void)
-+{
-+	rc_map_unregister(&xt_q8l_v10_map);
-+}
-+
-+module_init(init_rc_map_xt_q8l_v10)
-+module_exit(exit_rc_map_xt_q8l_v10)
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Paolo Sabatino");
-diff --git a/include/media/rc-map.h b/include/media/rc-map.h
-index d621acadf..ad7abdb97 100644
---- a/include/media/rc-map.h
-+++ b/include/media/rc-map.h
-@@ -278,6 +278,7 @@ struct rc_map *rc_map_get(const char *name);
- #define RC_MAP_WINFAST_USBII_DELUXE      "rc-winfast-usbii-deluxe"
- #define RC_MAP_SU3000                    "rc-su3000"
- #define RC_MAP_XBOX_DVD                  "rc-xbox-dvd"
-+#define RC_MAP_XT_Q8L_V10                "rc-xt-q8l-v10"
- #define RC_MAP_X96MAX                    "rc-x96max"
- 
- /*
-diff --git a/drivers/media/rc/keymaps/Makefile b/drivers/media/rc/keymaps/Makefile
-index 5b1399af6..ec9ce1206 100644
---- a/drivers/media/rc/keymaps/Makefile
-+++ b/drivers/media/rc/keymaps/Makefile
-@@ -117,4 +117,5 @@ obj-$(CONFIG_RC_MAP) += rc-adstech-dvb-t-pci.o \
- 			rc-winfast-usbii-deluxe.o \
- 			rc-su3000.o \
- 			rc-xbox-dvd.o \
-+			rc-xt-q8l-v10.o \
- 			rc-x96max.o \

buildroot-external/board/asus/tinker/patches/uboot/0001-SPL-modify-load-address-of-U-Boot.patch

@@ -0,0 +1,37 @@
+From cd1aac268ff58eea28153bbabfb33abc2df52b1f Mon Sep 17 00:00:00 2001
+Message-Id: <cd1aac268ff58eea28153bbabfb33abc2df52b1f.1602103621.git.stefan@agner.ch>
+From: Pascal Vizeli <pvizeli@syshack.ch>
+Date: Fri, 24 Apr 2020 12:41:50 +0000
+Subject: [PATCH 1/4] SPL: modify load address of U-Boot
+
+Default load address of U-Boot is at sector 16384, which is where HAOS
+has its first partition. Use 0x2000 (8192) instead.
+
+Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch>
+Signed-off-by: Stefan Agner <stefan@agner.ch>
+---
+ configs/tinker-rk3288_defconfig   | 1 +
+ configs/tinker-s-rk3288_defconfig | 1 +
+ 2 files changed, 2 insertions(+)
+
+diff --git a/configs/tinker-rk3288_defconfig b/configs/tinker-rk3288_defconfig
+index d459c7f50d..e0682ed479 100644
+--- a/configs/tinker-rk3288_defconfig
++++ b/configs/tinker-rk3288_defconfig
+@@ -88,3 +88,4 @@ CONFIG_VIDEO_ROCKCHIP=y
+ CONFIG_DISPLAY_ROCKCHIP_HDMI=y
+ CONFIG_CMD_DHRYSTONE=y
+ CONFIG_ERRNO_STR=y
++CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x2000
+diff --git a/configs/tinker-s-rk3288_defconfig b/configs/tinker-s-rk3288_defconfig
+index 68411d863b..1a285baf73 100644
+--- a/configs/tinker-s-rk3288_defconfig
++++ b/configs/tinker-s-rk3288_defconfig
+@@ -90,3 +90,4 @@ CONFIG_DISPLAY_ROCKCHIP_HDMI=y
+ CONFIG_CONSOLE_SCROLL_LINES=10
+ CONFIG_CMD_DHRYSTONE=y
+ CONFIG_ERRNO_STR=y
++CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x2000
+-- 
+2.28.0
+

buildroot-external/board/asus/tinker/patches/uboot/0001-TLP-Modify-entrypoint-for-u-boot.patch

@@ -1,23 +0,0 @@
-From 17735a28503d90db2a7173816861750f475580ea Mon Sep 17 00:00:00 2001
-From: Pascal Vizeli <pvizeli@syshack.ch>
-Date: Fri, 24 Apr 2020 12:41:50 +0000
-Subject: [PATCH 1/1] TLP: Modify entrypoint for u-boot
-
-Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch>
----
- configs/tinker-rk3288_defconfig | 2 ++
- 1 file changed, 2 insertions(+)
-
-diff --git a/configs/tinker-rk3288_defconfig b/configs/tinker-rk3288_defconfig
-index 83c3450839..648a7904be 100644
---- a/configs/tinker-rk3288_defconfig
-+++ b/configs/tinker-rk3288_defconfig
-@@ -84,3 +84,5 @@ CONFIG_USB_ETHER_ASIX=y
- CONFIG_USB_ETHER_SMSC95XX=y
- CONFIG_CMD_DHRYSTONE=y
- CONFIG_ERRNO_STR=y
-+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x3000
-+
--- 
-2.17.1
-

buildroot-external/board/asus/tinker/patches/uboot/0002-rockchip-dts-tinker-move-i2c-node-to-shared-device-t.patch

@@ -0,0 +1,55 @@
+From d49ad12ee89d0d64f1f594bcad7de0e4f9631add Mon Sep 17 00:00:00 2001
+Message-Id: <d49ad12ee89d0d64f1f594bcad7de0e4f9631add.1602103621.git.stefan@agner.ch>
+In-Reply-To: <cd1aac268ff58eea28153bbabfb33abc2df52b1f.1602103621.git.stefan@agner.ch>
+References: <cd1aac268ff58eea28153bbabfb33abc2df52b1f.1602103621.git.stefan@agner.ch>
+From: Stefan Agner <stefan@agner.ch>
+Date: Fri, 4 Sep 2020 15:40:55 +0200
+Subject: [PATCH 2/4] rockchip: dts: tinker: move i2c node to shared device
+ tree
+
+The I2C EEPROM is present on Tinker Board S as well. Move the i2c node
+to the shared, U-Boot specific rk3288-tinker-u-boot.dtsi device tree.
+
+Cc: Jonas Karlman <jonas@kwiboo.se>
+Signed-off-by: Stefan Agner <stefan@agner.ch>
+---
+ arch/arm/dts/rk3288-tinker-u-boot.dtsi | 7 +++++++
+ arch/arm/dts/rk3288-tinker.dts         | 7 -------
+ 2 files changed, 7 insertions(+), 7 deletions(-)
+
+diff --git a/arch/arm/dts/rk3288-tinker-u-boot.dtsi b/arch/arm/dts/rk3288-tinker-u-boot.dtsi
+index 732aa4f91f..3d169906fd 100644
+--- a/arch/arm/dts/rk3288-tinker-u-boot.dtsi
++++ b/arch/arm/dts/rk3288-tinker-u-boot.dtsi
+@@ -17,6 +17,13 @@
+ 	rockchip,sdram-params = <0x20d266a4 0x5b6 2 533000000 6 9 0>;
+ };
+ 
++&i2c2 {
++    m24c08@50 {
++        compatible = "at,24c08", "i2c-eeprom";
++        reg = <0x50>;
++    };
++};
++
+ &pinctrl {
+ 	u-boot,dm-pre-reloc;
+ };
+diff --git a/arch/arm/dts/rk3288-tinker.dts b/arch/arm/dts/rk3288-tinker.dts
+index 4b8405fd82..338670123b 100644
+--- a/arch/arm/dts/rk3288-tinker.dts
++++ b/arch/arm/dts/rk3288-tinker.dts
+@@ -35,10 +35,3 @@
+ 	vbus-supply = <&vcc5v0_host>;
+ 	status = "okay";
+ };
+-
+-&i2c2 {
+-    m24c08@50 {
+-        compatible = "at,24c08", "i2c-eeprom";
+-        reg = <0x50>;
+-    };
+-};
+-- 
+2.28.0
+

buildroot-external/board/asus/tinker/patches/uboot/0003-rockchip-dts-tinker-remove-unnecessary-node.patch

@@ -0,0 +1,34 @@
+From 07a02625ba95f68ba670b4c1cc98567acb390195 Mon Sep 17 00:00:00 2001
+Message-Id: <07a02625ba95f68ba670b4c1cc98567acb390195.1602103621.git.stefan@agner.ch>
+In-Reply-To: <cd1aac268ff58eea28153bbabfb33abc2df52b1f.1602103621.git.stefan@agner.ch>
+References: <cd1aac268ff58eea28153bbabfb33abc2df52b1f.1602103621.git.stefan@agner.ch>
+From: Stefan Agner <stefan@agner.ch>
+Date: Fri, 4 Sep 2020 15:44:38 +0200
+Subject: [PATCH 3/4] rockchip: dts: tinker: remove unnecessary node
+
+The property reg-shift with the same value is present in the base
+device tree already. Remove unnecessary node from rk3288-tinker.dts.
+
+Signed-off-by: Stefan Agner <stefan@agner.ch>
+---
+ arch/arm/dts/rk3288-tinker.dts | 4 ----
+ 1 file changed, 4 deletions(-)
+
+diff --git a/arch/arm/dts/rk3288-tinker.dts b/arch/arm/dts/rk3288-tinker.dts
+index 338670123b..8b1848c310 100644
+--- a/arch/arm/dts/rk3288-tinker.dts
++++ b/arch/arm/dts/rk3288-tinker.dts
+@@ -27,10 +27,6 @@
+ 	status = "okay";
+ };
+ 
+-&uart2 {
+-	reg-shift = <2>;
+-};
+-
+ &usb_host1 {
+ 	vbus-supply = <&vcc5v0_host>;
+ 	status = "okay";
+-- 
+2.28.0
+

buildroot-external/board/asus/tinker/patches/uboot/0004-pmic-enable-LDO2-vcc33_mipi-at-bootup.patch

@@ -1,7 +1,10 @@
-From 4147d34a63f74f78a8ff9a3dcf2f4c9cd8d6be3a Mon Sep 17 00:00:00 2001
+From 549d98c233b2a8b7cd4b0d4eb9652ad60a8a0f75 Mon Sep 17 00:00:00 2001
+Message-Id: <549d98c233b2a8b7cd4b0d4eb9652ad60a8a0f75.1602103621.git.stefan@agner.ch>
+In-Reply-To: <cd1aac268ff58eea28153bbabfb33abc2df52b1f.1602103621.git.stefan@agner.ch>
+References: <cd1aac268ff58eea28153bbabfb33abc2df52b1f.1602103621.git.stefan@agner.ch>
 From: Pascal Vizeli <pvizeli@syshack.ch>
 Date: Fri, 24 Apr 2020 11:37:55 +0000
-Subject: [PATCH 1/1] pmic: enable LDO2 vcc33_mipi at bootup
+Subject: [PATCH 4/4] pmic: enable LDO2 vcc33_mipi at bootup
 
 Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch>
 ---
@@ -9,10 +12,10 @@ Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch>
  1 file changed, 37 insertions(+)
 
 diff --git a/board/rockchip/tinker_rk3288/tinker-rk3288.c b/board/rockchip/tinker_rk3288/tinker-rk3288.c
-index 7af39e10cd..f12409933d 100644
+index f85209c649..6fa1bb0c66 100644
 --- a/board/rockchip/tinker_rk3288/tinker-rk3288.c
 +++ b/board/rockchip/tinker_rk3288/tinker-rk3288.c
-@@ -12,6 +12,7 @@
+@@ -13,6 +13,7 @@
  #include <netdev.h>
  #include <asm/arch-rockchip/bootrom.h>
  #include <asm/io.h>
@@ -20,7 +23,7 @@ index 7af39e10cd..f12409933d 100644
  
  static int get_ethaddr_from_eeprom(u8 *addr)
  {
-@@ -47,3 +48,39 @@ int mmc_get_env_dev(void)
+@@ -48,3 +49,39 @@ int mmc_get_env_dev(void)
  
  	return 1;
  }
@@ -61,5 +64,5 @@ index 7af39e10cd..f12409933d 100644
 +}
 +#endif
 -- 
-2.17.1
+2.28.0
 

buildroot-external/board/asus/tinker/uboot-boot.ush

@@ -17,7 +17,7 @@ test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3
 test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3
 
 # HassOS bootargs
-setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor systemd.machine_id=${MACHINE_ID} cgroup_enable=memory"
+setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor systemd.machine_id=${MACHINE_ID} cgroup_enable=memory fsck.repair=yes"
 
 # HassOS system A/B
 setenv bootargs_a "root=PARTUUID=8d3d53e3-6d49-4c38-8349-aff6859e82fd rootfstype=squashfs ro rootwait"
@@ -27,7 +27,11 @@ setenv bootargs_b "root=PARTUUID=a3ec664e-32ce-4665-95ea-7ae90ce9aa20 rootfstype
 fileenv mmc ${devnum}:1 ${ramdisk_addr_r} cmdline.txt cmdline
 
 # Load device tree
-fatload mmc ${devnum}:1 ${fdt_addr_r} rk3288-tinker.dtb
+if test "$devnum" = "0"; then
+  fatload mmc ${devnum}:1 ${fdt_addr_r} rk3288-tinker-s.dtb
+else
+  fatload mmc ${devnum}:1 ${fdt_addr_r} rk3288-tinker.dtb
+fi
 
 setenv bootargs
 for BOOT_SLOT in "${BOOT_ORDER}"; do
@@ -47,7 +51,6 @@ for BOOT_SLOT in "${BOOT_ORDER}"; do
       echo "Trying to boot slot B, ${BOOT_B_LEFT} attempts remaining. Loading kernel ..."
       if ext4load mmc ${devnum}:4 ${kernel_addr_r} zImage"; then
           setenv bootargs "${bootargs_hassos} ${bootargs_b} rauc.slot=B ${cmdline}"
-      fi
     fi
   fi
 done

buildroot-external/board/hardkernel/odroid-c2/hassos-hook.sh

@@ -22,6 +22,6 @@ function hassos_pre_image() {
 
 
 function hassos_post_image() {
-    convert_disk_image_gz
+    convert_disk_image_xz
 }
 

buildroot-external/board/hardkernel/odroid-c2/uboot-boot.ush

@@ -19,7 +19,7 @@ test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3
 test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3
 
 # HassOS bootargs
-setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor systemd.machine_id=${MACHINE_ID} cgroup_enable=memory"
+setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor systemd.machine_id=${MACHINE_ID} cgroup_enable=memory fsck.repair=yes"
 
 # HassOS system A/B
 setenv bootargs_a "root=PARTUUID=48617373-06 rootfstype=squashfs ro rootwait"

buildroot-external/board/hardkernel/odroid-c4/hassos-hook.sh

@@ -0,0 +1,23 @@
+#!/bin/bash
+# shellcheck disable=SC2155
+
+function hassos_pre_image() {
+    local BOOT_DATA="$(path_boot_dir)"
+    local UBOOT_SM1="${BINARIES_DIR}/u-boot.sm1"
+    local SPL_IMG="$(path_spl_img)"
+
+    cp "${BINARIES_DIR}/boot.scr" "${BOOT_DATA}/boot.scr"
+    cp "${BINARIES_DIR}/meson-sm1-odroid-c4.dtb" "${BOOT_DATA}/meson-sm1-odroid-c4.dtb"
+
+    echo "console=tty0 console=ttyAML0,115200n8" > "${BOOT_DATA}/cmdline.txt"
+
+    # SPL
+    create_spl_image
+
+    dd if="${UBOOT_SM1}" of="${SPL_IMG}" conv=notrunc bs=512 seek=1
+}
+
+
+function hassos_post_image() {
+    convert_disk_image_xz
+}

buildroot-external/board/hardkernel/odroid-c4/meta

@@ -0,0 +1,10 @@
+BOARD_ID=odroid-c4
+BOARD_NAME="Hardkernel Odroid-C4"
+CHASSIS=embedded
+BOOTLOADER=uboot
+KERNEL_FILE=Image
+BOOT_SYS=mbr
+BOOT_SPL=true
+BOOT_ENV_SIZE=0x2000
+SUPERVISOR_MACHINE=odroid-c4
+SUPERVISOR_ARCH=aarch64

buildroot-external/board/hardkernel/odroid-c4/patches/uboot/0001-HACK-mmc-meson-gx-limit-to-24MHz.patch

@@ -1,10 +1,7 @@
-From 88650de0cd71c3d75fda780fad2827432516d780 Mon Sep 17 00:00:00 2001
-Message-Id: <88650de0cd71c3d75fda780fad2827432516d780.1607441248.git.stefan@agner.ch>
-In-Reply-To: <c12338d22649e46aed12ebe60d897112f045fda9.1607441248.git.stefan@agner.ch>
-References: <c12338d22649e46aed12ebe60d897112f045fda9.1607441248.git.stefan@agner.ch>
+From 64017a2cc9e501329016d50b701c5e9a9488991d Mon Sep 17 00:00:00 2001
 From: Neil Armstrong <narmstrong@baylibre.com>
 Date: Mon, 2 Sep 2019 15:42:04 +0200
-Subject: [PATCH 4/4] HACK: mmc: meson-gx: limit to 24MHz
+Subject: [PATCH 3/3] HACK: mmc: meson-gx: limit to 24MHz
 
 Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
 ---
@@ -12,7 +9,7 @@ Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
  1 file changed, 1 insertion(+), 1 deletion(-)
 
 diff --git a/drivers/mmc/meson_gx_mmc.c b/drivers/mmc/meson_gx_mmc.c
-index b5f5122b1b..00bfa3249e 100644
+index b5f5122b..00bfa324 100644
 --- a/drivers/mmc/meson_gx_mmc.c
 +++ b/drivers/mmc/meson_gx_mmc.c
 @@ -252,7 +252,7 @@ static int meson_mmc_probe(struct udevice *dev)
@@ -23,7 +20,6 @@ index b5f5122b1b..00bfa3249e 100644
 +	cfg->f_max = SD_EMMC_CLKSRC_24M;
  	cfg->b_max = 511; /* max 512 - 1 blocks */
  	cfg->name = dev->name;
- 
--- 
-2.29.2
 
+--
+2.22.0

buildroot-external/board/hardkernel/odroid-c4/uboot-boot.ush

@@ -0,0 +1,80 @@
+
+###########################################
+
+part start mmc ${devnum} 9 mmc_env
+mmc dev ${devnum}
+setenv loadbootstate " \
+    echo 'loading env...'; \
+    mmc read ${ramdisk_addr_r} ${mmc_env} 0x10; \
+    env import -c ${ramdisk_addr_r} 0x2000;"
+
+setenv storebootstate " \
+    echo 'storing env...'; \
+    env export -c -s 0x2000 ${ramdisk_addr_r} BOOT_ORDER BOOT_A_LEFT BOOT_B_LEFT MACHINE_ID; \
+    mmc write ${ramdisk_addr_r} ${mmc_env} 0x10;"
+
+run loadbootstate
+test -n "${BOOT_ORDER}" || setenv BOOT_ORDER "A B"
+test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3
+test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3
+
+# HassOS bootargs
+setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor systemd.machine_id=${MACHINE_ID} cgroup_enable=memory clk_ignore_unused usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u"
+
+# HassOS system A/B
+setenv bootargs_a "root=PARTUUID=48617373-06 rootfstype=squashfs ro rootwait"
+setenv bootargs_b "root=PARTUUID=48617373-08 rootfstype=squashfs ro rootwait"
+
+# Load extraargs
+fileenv mmc ${devnum}:1 ${ramdisk_addr_r} cmdline.txt cmdline
+fatload mmc ${devnum}:1 ${fdt_addr_r} meson-sm1-odroid-c4.dtb
+
+# logical volumes get numbered after physical ones.
+# 1. boot
+# 2. Extended partition
+# 3. Overlay
+# 4. Data
+# 5. KernelA
+# 6. SystemA
+# 7. KernelB
+# 8. SystemB
+# 9. BootInfo
+setenv bootargs
+for BOOT_SLOT in "${BOOT_ORDER}"; do
+  if test "x${bootargs}" != "x"; then
+    # skip remaining slots
+  elif test "x${BOOT_SLOT}" = "xA"; then
+    if test ${BOOT_A_LEFT} -gt 0; then
+      setexpr BOOT_A_LEFT ${BOOT_A_LEFT} - 1
+      echo "Trying to boot slot A, ${BOOT_A_LEFT} attempts remaining. Loading kernel ..."
+      if ext4load mmc ${devnum}:5 ${kernel_addr_r} Image; then
+          setenv bootargs "${bootargs_hassos} ${bootargs_a} rauc.slot=A ${cmdline}"
+      fi
+    fi
+  elif test "x${BOOT_SLOT}" = "xB"; then
+    if test ${BOOT_B_LEFT} -gt 0; then
+      setexpr BOOT_B_LEFT ${BOOT_B_LEFT} - 1
+      echo "Trying to boot slot B, ${BOOT_B_LEFT} attempts remaining. Loading kernel ..."
+      if ext4load mmc ${devnum}:7 ${kernel_addr_r} Image; then
+          setenv bootargs "${bootargs_hassos} ${bootargs_b} rauc.slot=B ${cmdline}"
+      fi
+    fi
+  fi
+done
+
+if test -n "${bootargs}"; then
+  run storebootstate
+else
+  echo "No valid slot found, resetting tries to 3"
+  setenv BOOT_A_LEFT 3
+  setenv BOOT_B_LEFT 3
+  run storebootstate
+  reset
+fi
+
+printenv bootargs
+echo "Starting kernel"
+booti ${kernel_addr_r} - ${fdt_addr_r}
+
+echo "Boot failed, resetting..."
+reset

buildroot-external/board/hardkernel/odroid-c4/uboot.config

@@ -0,0 +1,4 @@
+CONFIG_DOS_PARTITION=y
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_USB_STORAGE is not set
+CONFIG_DISPLAY_BOARDINFO=y

buildroot-external/board/hardkernel/odroid-n2/hassos-hook.sh

@@ -19,6 +19,6 @@ function hassos_pre_image() {
 
 
 function hassos_post_image() {
-    convert_disk_image_gz
+    convert_disk_image_xz
 }
 

buildroot-external/board/hardkernel/odroid-n2/uboot-boot.ush

@@ -19,7 +19,7 @@ test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3
 test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3
 
 # HassOS bootargs
-setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor systemd.machine_id=${MACHINE_ID} cgroup_enable=memory"
+setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor systemd.machine_id=${MACHINE_ID} cgroup_enable=memory fsck.repair=yes"
 
 # HassOS system A/B
 setenv bootargs_a "root=PARTUUID=48617373-06 rootfstype=squashfs ro rootwait"

buildroot-external/board/hardkernel/odroid-xu4/hassos-hook.sh

@@ -26,5 +26,5 @@ function hassos_pre_image() {
 
 
 function hassos_post_image() {
-    convert_disk_image_gz
+    convert_disk_image_xz
 }

buildroot-external/board/hardkernel/odroid-xu4/uboot-boot.ush

@@ -21,7 +21,7 @@ test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3
 test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3
 
 # HassOS bootargs
-setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor systemd.machine_id=${MACHINE_ID} cgroup_enable=memory"
+setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor systemd.machine_id=${MACHINE_ID} cgroup_enable=memory fsck.repair=yes"
 
 # HassOS system A/B
 setenv bootargs_a "root=PARTUUID=48617373-06 rootfstype=squashfs ro rootwait"

buildroot-external/board/hardkernel/patches/linux/0001-arm64-defconfig-enable-meson-gx-audio-as-module.patch

@@ -1,44 +0,0 @@
-From 59bbf3567b02c36edfa4ee013d7e7e8c492756f2 Mon Sep 17 00:00:00 2001
-Message-Id: <59bbf3567b02c36edfa4ee013d7e7e8c492756f2.1606830718.git.stefan@agner.ch>
-From: Jerome Brunet <jbrunet@baylibre.com>
-Date: Tue, 21 Apr 2020 18:39:30 +0200
-Subject: [PATCH 01/17] arm64: defconfig: enable meson gx audio as module
-
-Enable the module config for the Amlogic GX audio card.
-This module will imply the internal components usually associated
-with it to make a functional sound card on these platforms.
-
-Also enable the simple amplifier module which often used on the
-output stage of those cards.
-
-Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
-Signed-off-by: Kevin Hilman <khilman@baylibre.com>
-Tested-by: Christian Hewitt <christianshewitt@gmail.com>
-Link: https://lore.kernel.org/r/20200421163935.775935-2-jbrunet@baylibre.com
----
- arch/arm64/configs/defconfig | 2 ++
- 1 file changed, 2 insertions(+)
-
-diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
-index 03d0189f7d68..ceb60ee9c340 100644
---- a/arch/arm64/configs/defconfig
-+++ b/arch/arm64/configs/defconfig
-@@ -644,6 +644,7 @@ CONFIG_SND_HDA_CODEC_HDMI=m
- CONFIG_SND_SOC=y
- CONFIG_SND_BCM2835_SOC_I2S=m
- CONFIG_SND_MESON_AXG_SOUND_CARD=m
-+CONFIG_SND_MESON_GX_SOUND_CARD=m
- CONFIG_SND_SOC_SDM845=m
- CONFIG_SND_SOC_ROCKCHIP=m
- CONFIG_SND_SOC_ROCKCHIP_SPDIF=m
-@@ -656,6 +657,7 @@ CONFIG_SND_SOC_AK4613=m
- CONFIG_SND_SOC_ES7134=m
- CONFIG_SND_SOC_ES7241=m
- CONFIG_SND_SOC_PCM3168A_I2C=m
-+CONFIG_SND_SOC_SIMPLE_AMPLIFIER=m
- CONFIG_SND_SOC_TAS571X=m
- CONFIG_SND_SOC_WCD934X=m
- CONFIG_SND_SOC_WSA881X=m
--- 
-2.29.2
-

buildroot-external/board/hardkernel/patches/linux/0001-arm64-dts-meson-convert-ODROID-N2-to-dtsi.patch

@@ -1,10 +1,8 @@
-From 7b28edf8a4004c3636afab617191fbfb6cff9b58 Mon Sep 17 00:00:00 2001
-Message-Id: <7b28edf8a4004c3636afab617191fbfb6cff9b58.1606830718.git.stefan@agner.ch>
-In-Reply-To: <59bbf3567b02c36edfa4ee013d7e7e8c492756f2.1606830718.git.stefan@agner.ch>
-References: <59bbf3567b02c36edfa4ee013d7e7e8c492756f2.1606830718.git.stefan@agner.ch>
+From 734f52f38625ce29c964517255538b3b0b546e8d Mon Sep 17 00:00:00 2001
+Message-Id: <734f52f38625ce29c964517255538b3b0b546e8d.1603528796.git.stefan@agner.ch>
 From: Christian Hewitt <christianshewitt@gmail.com>
 Date: Tue, 15 Sep 2020 17:24:30 +0200
-Subject: [PATCH 09/17] arm64: dts: meson: convert ODROID-N2 to dtsi
+Subject: [PATCH 1/7] arm64: dts: meson: convert ODROID-N2 to dtsi
 
 Convert the current ODROID-N2 dts into a common dtsi in preparation
 for adding ODROID-N2+ support.
@@ -1284,5 +1282,5 @@ index 000000000000..6982632ae646
 +	phy-supply = <&hub_5v>;
 +};
 -- 
-2.29.2
+2.28.0
 

buildroot-external/board/hardkernel/patches/linux/0002-ASoC-meson-imply-acodec-glue-on-axg-sound-card.patch

@@ -1,31 +0,0 @@
-From 4684d42cbbbb2d0331eb273229c9856a09b8d687 Mon Sep 17 00:00:00 2001
-Message-Id: <4684d42cbbbb2d0331eb273229c9856a09b8d687.1606830718.git.stefan@agner.ch>
-In-Reply-To: <59bbf3567b02c36edfa4ee013d7e7e8c492756f2.1606830718.git.stefan@agner.ch>
-References: <59bbf3567b02c36edfa4ee013d7e7e8c492756f2.1606830718.git.stefan@agner.ch>
-From: Jerome Brunet <jbrunet@baylibre.com>
-Date: Mon, 30 Mar 2020 17:39:04 +0200
-Subject: [PATCH 02/17] ASoC: meson: imply acodec glue on axg sound card
-
-When axg card driver support is enabled, lets enable the related
-internal DAC glue by default.
-
-Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
----
- sound/soc/meson/Kconfig | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/sound/soc/meson/Kconfig b/sound/soc/meson/Kconfig
-index 8b6295283989..363dc3b1bbe4 100644
---- a/sound/soc/meson/Kconfig
-+++ b/sound/soc/meson/Kconfig
-@@ -68,6 +68,7 @@ config SND_MESON_AXG_SOUND_CARD
- 	imply SND_MESON_AXG_SPDIFOUT
- 	imply SND_MESON_AXG_SPDIFIN
- 	imply SND_MESON_AXG_PDM
-+	imply SND_MESON_G12A_TOACODEC
- 	imply SND_MESON_G12A_TOHDMITX if DRM_MESON_DW_HDMI
- 	help
- 	  Select Y or M to add support for the AXG SoC sound card
--- 
-2.29.2
-

buildroot-external/board/hardkernel/patches/linux/0002-dt-bindings-arm-amlogic-add-support-for-the-ODROID-N.patch

@@ -1,11 +1,10 @@
-From 40c86a409f3fa18c3f30bad3abeccff04379eaa9 Mon Sep 17 00:00:00 2001
-Message-Id: <40c86a409f3fa18c3f30bad3abeccff04379eaa9.1606830718.git.stefan@agner.ch>
-In-Reply-To: <59bbf3567b02c36edfa4ee013d7e7e8c492756f2.1606830718.git.stefan@agner.ch>
-References: <59bbf3567b02c36edfa4ee013d7e7e8c492756f2.1606830718.git.stefan@agner.ch>
+From 75f1e8330dac46a0bef8a360be0ae4566d9a470c Mon Sep 17 00:00:00 2001
+Message-Id: <75f1e8330dac46a0bef8a360be0ae4566d9a470c.1603528796.git.stefan@agner.ch>
+In-Reply-To: <734f52f38625ce29c964517255538b3b0b546e8d.1603528796.git.stefan@agner.ch>
+References: <734f52f38625ce29c964517255538b3b0b546e8d.1603528796.git.stefan@agner.ch>
 From: Christian Hewitt <christianshewitt@gmail.com>
 Date: Tue, 15 Sep 2020 17:24:31 +0200
-Subject: [PATCH 08/17] dt-bindings: arm: amlogic: add support for the
- ODROID-N2+
+Subject: [PATCH 2/7] dt-bindings: arm: amlogic: add support for the ODROID-N2+
 
 HardKernel ODROID-N2+ uses a revised Amlogic S922X v2 chip that supports
 higher cpu clock speeds than the original ODROID-N2.
@@ -21,17 +20,17 @@ Link: https://lore.kernel.org/r/20200915152432.30616-3-narmstrong@baylibre.com
  1 file changed, 1 insertion(+)
 
 diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
-index f74aba48cec1..915ef4f355ad 100644
+index 5eba9f48823e..12ba8d074370 100644
 --- a/Documentation/devicetree/bindings/arm/amlogic.yaml
 +++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
-@@ -149,6 +149,7 @@ properties:
-         items:
-           - enum:
+@@ -153,6 +153,7 @@ properties:
+               - azw,gtking
+               - azw,gtking-pro
                - hardkernel,odroid-n2
 +              - hardkernel,odroid-n2-plus
                - khadas,vim3
                - ugoos,am6
            - const: amlogic,s922x
 -- 
-2.29.2
+2.28.0
 

buildroot-external/board/hardkernel/patches/linux/0003-ASoC-meson-gx-card-fix-sound-dai-dt-schema.patch

@@ -1,50 +0,0 @@
-From 07eb6dcfc912281b3c4ad598d8cfd3b7548fc965 Mon Sep 17 00:00:00 2001
-Message-Id: <07eb6dcfc912281b3c4ad598d8cfd3b7548fc965.1606830718.git.stefan@agner.ch>
-In-Reply-To: <59bbf3567b02c36edfa4ee013d7e7e8c492756f2.1606830718.git.stefan@agner.ch>
-References: <59bbf3567b02c36edfa4ee013d7e7e8c492756f2.1606830718.git.stefan@agner.ch>
-From: Jerome Brunet <jbrunet@baylibre.com>
-Date: Mon, 24 Feb 2020 14:35:17 +0100
-Subject: [PATCH 03/17] ASoC: meson: gx-card: fix sound-dai dt schema
-
-There is a fair amount of warnings when running 'make dtbs_check' with
-amlogic,gx-sound-card.yaml.
-
-Ex:
-arch/arm64/boot/dts/amlogic/meson-gxm-q200.dt.yaml: sound: dai-link-0:sound-dai:0:1: missing phandle tag in 0
-arch/arm64/boot/dts/amlogic/meson-gxm-q200.dt.yaml: sound: dai-link-0:sound-dai:0:2: missing phandle tag in 0
-arch/arm64/boot/dts/amlogic/meson-gxm-q200.dt.yaml: sound: dai-link-0:sound-dai:0: [66, 0, 0] is too long
-
-The reason is that the sound-dai phandle provided has cells, and in such
-case the schema should use 'phandle-array' instead of 'phandle'.
-
-Fixes: fd00366b8e41 ("ASoC: meson: gx: add sound card dt-binding documentation")
-Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
----
- .../devicetree/bindings/sound/amlogic,gx-sound-card.yaml      | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml b/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
-index fb374c659be1..a48222e8cd08 100644
---- a/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
-+++ b/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
-@@ -57,7 +57,7 @@ patternProperties:
-           rate
- 
-       sound-dai:
--        $ref: /schemas/types.yaml#/definitions/phandle
-+        $ref: /schemas/types.yaml#/definitions/phandle-array
-         description: phandle of the CPU DAI
- 
-     patternProperties:
-@@ -71,7 +71,7 @@ patternProperties:
- 
-         properties:
-           sound-dai:
--            $ref: /schemas/types.yaml#/definitions/phandle
-+            $ref: /schemas/types.yaml#/definitions/phandle-array
-             description: phandle of the codec DAI
- 
-         required:
--- 
-2.29.2
-

buildroot-external/board/hardkernel/patches/linux/0003-arm64-dts-meson-add-support-for-the-ODROID-N2.patch

@@ -1,10 +1,10 @@
-From 45ac6c04283dce57e0e911d5dc794eeb9446394c Mon Sep 17 00:00:00 2001
-Message-Id: <45ac6c04283dce57e0e911d5dc794eeb9446394c.1606830718.git.stefan@agner.ch>
-In-Reply-To: <59bbf3567b02c36edfa4ee013d7e7e8c492756f2.1606830718.git.stefan@agner.ch>
-References: <59bbf3567b02c36edfa4ee013d7e7e8c492756f2.1606830718.git.stefan@agner.ch>
+From c714cb26fcb59f5201f7aac68dfd9883319881b2 Mon Sep 17 00:00:00 2001
+Message-Id: <c714cb26fcb59f5201f7aac68dfd9883319881b2.1603528796.git.stefan@agner.ch>
+In-Reply-To: <734f52f38625ce29c964517255538b3b0b546e8d.1603528796.git.stefan@agner.ch>
+References: <734f52f38625ce29c964517255538b3b0b546e8d.1603528796.git.stefan@agner.ch>
 From: Christian Hewitt <christianshewitt@gmail.com>
 Date: Tue, 15 Sep 2020 17:24:32 +0200
-Subject: [PATCH 10/17] arm64: dts: meson: add support for the ODROID-N2+
+Subject: [PATCH 3/7] arm64: dts: meson: add support for the ODROID-N2+
 
 HardKernel ODROID-N2+ uses an Amlogic S922X rev. C chip capable of higher
 clock speeds than the original ODROID-N2.
@@ -25,10 +25,10 @@ Link: https://lore.kernel.org/r/20200915152432.30616-4-narmstrong@baylibre.com
  create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2-plus.dts
 
 diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
-index eef0045320f2..7524cf9680f5 100644
+index 4e2239ffcaa5..b0b3d6791499 100644
 --- a/arch/arm64/boot/dts/amlogic/Makefile
 +++ b/arch/arm64/boot/dts/amlogic/Makefile
-@@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb
+@@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking-pro.dtb
  dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3.dtb
  dtb-$(CONFIG_ARCH_MESON) += meson-g12b-s922x-khadas-vim3.dtb
  dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2.dtb
@@ -74,5 +74,5 @@ index 000000000000..5de2815ba99d
 +};
 +
 -- 
-2.29.2
+2.28.0
 

buildroot-external/board/hardkernel/patches/linux/0004-arm64-dts-meson-g12-add-internal-DAC.patch

@@ -1,42 +0,0 @@
-From 5f7bab7b52bc68738dd23af62a085dcc45c22f79 Mon Sep 17 00:00:00 2001
-Message-Id: <5f7bab7b52bc68738dd23af62a085dcc45c22f79.1606830718.git.stefan@agner.ch>
-In-Reply-To: <59bbf3567b02c36edfa4ee013d7e7e8c492756f2.1606830718.git.stefan@agner.ch>
-References: <59bbf3567b02c36edfa4ee013d7e7e8c492756f2.1606830718.git.stefan@agner.ch>
-From: Jerome Brunet <jbrunet@baylibre.com>
-Date: Thu, 7 May 2020 00:16:55 +0200
-Subject: [PATCH 04/17] arm64: dts: meson: g12: add internal DAC
-
-add internal audio DAC support on the g12 and sm1 SoC family
-
-Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
-Signed-off-by: Kevin Hilman <khilman@baylibre.com>
-Link: https://lore.kernel.org/r/20200506221656.477379-7-jbrunet@baylibre.com
----
- arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 11 +++++++++++
- 1 file changed, 11 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
-index c0aef7d69117..593a006f4b7b 100644
---- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
-+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
-@@ -250,6 +250,17 @@ hwrng: rng@218 {
- 				};
- 			};
- 
-+			acodec: audio-controller@32000 {
-+				compatible = "amlogic,t9015";
-+				reg = <0x0 0x32000 0x0 0x14>;
-+				#sound-dai-cells = <0>;
-+				sound-name-prefix = "ACODEC";
-+				clocks = <&clkc CLKID_AUDIO_CODEC>;
-+				clock-names = "pclk";
-+				resets = <&reset RESET_AUDIO_CODEC>;
-+				status = "disabled";
-+			};
-+
- 			periphs: bus@34400 {
- 				compatible = "simple-bus";
- 				reg = <0x0 0x34400 0x0 0x400>;
--- 
-2.29.2
-

buildroot-external/board/hardkernel/patches/linux/0005-arm64-dts-meson-g12-add-internal-DAC-glue.patch

@@ -1,42 +0,0 @@
-From e7d1f61513cfe9d2557fbd0ac981a3ecaab9bc70 Mon Sep 17 00:00:00 2001
-Message-Id: <e7d1f61513cfe9d2557fbd0ac981a3ecaab9bc70.1606830718.git.stefan@agner.ch>
-In-Reply-To: <59bbf3567b02c36edfa4ee013d7e7e8c492756f2.1606830718.git.stefan@agner.ch>
-References: <59bbf3567b02c36edfa4ee013d7e7e8c492756f2.1606830718.git.stefan@agner.ch>
-From: Jerome Brunet <jbrunet@baylibre.com>
-Date: Thu, 7 May 2020 00:16:56 +0200
-Subject: [PATCH 05/17] arm64: dts: meson: g12: add internal DAC glue
-
-add the internal DAC glue support on the g12 and sm1 family
-This glue connects the different TDM interfaces of the SoC to
-the internal audio DAC codec.
-
-Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
-Signed-off-by: Kevin Hilman <khilman@baylibre.com>
-Link: https://lore.kernel.org/r/20200506221656.477379-8-jbrunet@baylibre.com
----
- arch/arm64/boot/dts/amlogic/meson-g12.dtsi | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/amlogic/meson-g12.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12.dtsi
-index 55d39020ec72..0d14409f509c 100644
---- a/arch/arm64/boot/dts/amlogic/meson-g12.dtsi
-+++ b/arch/arm64/boot/dts/amlogic/meson-g12.dtsi
-@@ -343,6 +343,15 @@ spdifout_b: audio-controller@680 {
- 			status = "disabled";
- 		};
- 
-+		toacodec: audio-controller@740 {
-+			compatible = "amlogic,g12a-toacodec";
-+			reg = <0x0 0x740 0x0 0x4>;
-+			#sound-dai-cells = <1>;
-+			sound-name-prefix = "TOACODEC";
-+			resets = <&clkc_audio AUD_RESET_TOACODEC>;
-+			status = "disabled";
-+		};
-+
- 		tohdmitx: audio-controller@744 {
- 			compatible = "amlogic,g12a-tohdmitx";
- 			reg = <0x0 0x744 0x0 0x4>;
--- 
-2.29.2
-

buildroot-external/board/hardkernel/patches/linux/0005-arm64-dts-meson-odroid-n2-plus-fix-vddcpu_a-pwm.patch

@@ -1,10 +1,10 @@
-From 28967338d3222c1ef2e1ee7372ec857aab43589b Mon Sep 17 00:00:00 2001
-Message-Id: <28967338d3222c1ef2e1ee7372ec857aab43589b.1606830718.git.stefan@agner.ch>
-In-Reply-To: <59bbf3567b02c36edfa4ee013d7e7e8c492756f2.1606830718.git.stefan@agner.ch>
-References: <59bbf3567b02c36edfa4ee013d7e7e8c492756f2.1606830718.git.stefan@agner.ch>
+From 0a3a45efeefaf65c170df265126a07da3236e178 Mon Sep 17 00:00:00 2001
+Message-Id: <0a3a45efeefaf65c170df265126a07da3236e178.1603528796.git.stefan@agner.ch>
+In-Reply-To: <734f52f38625ce29c964517255538b3b0b546e8d.1603528796.git.stefan@agner.ch>
+References: <734f52f38625ce29c964517255538b3b0b546e8d.1603528796.git.stefan@agner.ch>
 From: Jerome Brunet <jbrunet@baylibre.com>
 Date: Fri, 23 Oct 2020 11:41:39 +0200
-Subject: [PATCH 12/17] arm64: dts: meson: odroid-n2 plus: fix vddcpu_a pwm
+Subject: [PATCH 5/7] arm64: dts: meson: odroid-n2 plus: fix vddcpu_a pwm
 
 On the odroid N2 plus, cpufreq is not available due to an error on the cpu
 regulators. vddcpu a and b get the same PWM. The one provided to vddcpu A
@@ -38,5 +38,5 @@ index 5de2815ba99d..ce1198ad34e4 100644
  
  &vddcpu_b {
 -- 
-2.29.2
+2.28.0
 

buildroot-external/board/hardkernel/patches/linux/0006-arm64-dts-meson-g12b-odroid-n2-enable-audio-loopback.patch

@@ -1,127 +0,0 @@
-From a778ae244b9e6035ef4c0e4fb36d81f140ed5019 Mon Sep 17 00:00:00 2001
-Message-Id: <a778ae244b9e6035ef4c0e4fb36d81f140ed5019.1606830718.git.stefan@agner.ch>
-In-Reply-To: <59bbf3567b02c36edfa4ee013d7e7e8c492756f2.1606830718.git.stefan@agner.ch>
-References: <59bbf3567b02c36edfa4ee013d7e7e8c492756f2.1606830718.git.stefan@agner.ch>
-From: Jerome Brunet <jbrunet@baylibre.com>
-Date: Mon, 15 Jun 2020 15:38:44 +0200
-Subject: [PATCH 06/17] arm64: dts: meson-g12b: odroid-n2: enable audio
- loopback
-
-Add capture pcm interfaces and loopback routes to the odroid-n2
-
-Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
----
- .../boot/dts/amlogic/meson-g12b-odroid-n2.dts | 65 +++++++++++++++++--
- 1 file changed, 61 insertions(+), 4 deletions(-)
-
-diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
-index 169ea283d4ee..d4421ad164bd 100644
---- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
-+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
-@@ -209,11 +209,28 @@ hdmi_connector_in: endpoint {
- 	sound {
- 		compatible = "amlogic,axg-sound-card";
- 		model = "G12B-ODROID-N2";
--		audio-aux-devs = <&tdmout_b>;
-+		audio-aux-devs = <&tdmout_b>, <&tdmin_a>, <&tdmin_b>,
-+				 <&tdmin_c>, <&tdmin_lb>;
- 		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
- 				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
- 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
--				"TDM_B Playback", "TDMOUT_B OUT";
-+				"TDM_B Playback", "TDMOUT_B OUT",
-+				"TDMIN_A IN 4", "TDM_B Loopback",
-+				"TDMIN_B IN 4", "TDM_B Loopback",
-+				"TDMIN_C IN 4", "TDM_B Loopback",
-+				"TDMIN_LB IN 1", "TDM_B Loopback",
-+				"TODDR_A IN 0", "TDMIN_A OUT",
-+				"TODDR_B IN 0", "TDMIN_A OUT",
-+				"TODDR_C IN 0", "TDMIN_A OUT",
-+				"TODDR_A IN 1", "TDMIN_B OUT",
-+				"TODDR_B IN 1", "TDMIN_B OUT",
-+				"TODDR_C IN 1", "TDMIN_B OUT",
-+				"TODDR_A IN 2", "TDMIN_C OUT",
-+				"TODDR_B IN 2", "TDMIN_C OUT",
-+				"TODDR_C IN 2", "TDMIN_C OUT",
-+				"TODDR_A IN 6", "TDMIN_LB OUT",
-+				"TODDR_B IN 6", "TDMIN_LB OUT",
-+				"TODDR_C IN 6", "TDMIN_LB OUT";
- 
- 		assigned-clocks = <&clkc CLKID_MPLL2>,
- 				  <&clkc CLKID_MPLL0>,
-@@ -236,8 +253,20 @@ dai-link-2 {
- 			sound-dai = <&frddr_c>;
- 		};
- 
--		/* 8ch hdmi interface */
- 		dai-link-3 {
-+			sound-dai = <&toddr_a>;
-+		};
-+
-+		dai-link-4 {
-+			sound-dai = <&toddr_b>;
-+		};
-+
-+		dai-link-5 {
-+			sound-dai = <&toddr_c>;
-+		};
-+
-+		/* 8ch hdmi interface */
-+		dai-link-6 {
- 			sound-dai = <&tdmif_b>;
- 			dai-format = "i2s";
- 			dai-tdm-slot-tx-mask-0 = <1 1>;
-@@ -252,7 +281,7 @@ codec {
- 		};
- 
- 		/* hdmi glue */
--		dai-link-4 {
-+		dai-link-7 {
- 			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
- 
- 			codec {
-@@ -476,6 +505,22 @@ &tdmif_b {
- 	status = "okay";
- };
- 
-+&tdmin_a {
-+	status = "okay";
-+};
-+
-+&tdmin_b {
-+	status = "okay";
-+};
-+
-+&tdmin_c {
-+	status = "okay";
-+};
-+
-+&tdmin_lb {
-+	status = "okay";
-+};
-+
- &tdmout_b {
- 	status = "okay";
- };
-@@ -484,6 +529,18 @@ &tohdmitx {
- 	status = "okay";
- };
- 
-+&toddr_a {
-+	status = "okay";
-+};
-+
-+&toddr_b {
-+	status = "okay";
-+};
-+
-+&toddr_c {
-+	status = "okay";
-+};
-+
- &uart_AO {
- 	status = "okay";
- 	pinctrl-0 = <&uart_ao_a_pins>;
--- 
-2.29.2
-

buildroot-external/board/hardkernel/patches/linux/0006-clk-meson-g12a-mark-fclk_div2-as-critical.patch

@@ -1,10 +1,10 @@
-From b65f3fd306972087aa43e91ab0951b19883a21f7 Mon Sep 17 00:00:00 2001
-Message-Id: <b65f3fd306972087aa43e91ab0951b19883a21f7.1606830718.git.stefan@agner.ch>
-In-Reply-To: <59bbf3567b02c36edfa4ee013d7e7e8c492756f2.1606830718.git.stefan@agner.ch>
-References: <59bbf3567b02c36edfa4ee013d7e7e8c492756f2.1606830718.git.stefan@agner.ch>
+From 03041630d824a775b71f6008067955a51d069845 Mon Sep 17 00:00:00 2001
+Message-Id: <03041630d824a775b71f6008067955a51d069845.1603528796.git.stefan@agner.ch>
+In-Reply-To: <734f52f38625ce29c964517255538b3b0b546e8d.1603528796.git.stefan@agner.ch>
+References: <734f52f38625ce29c964517255538b3b0b546e8d.1603528796.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Thu, 27 Aug 2020 23:29:57 +0200
-Subject: [PATCH 13/17] clk: meson: g12a: mark fclk_div2 as critical
+Subject: [PATCH 6/7] clk: meson: g12a: mark fclk_div2 as critical
 
 On Amlogic Meson G12b platform, similar to fclk_div3, the fclk_div2
 seems to be necessary for the system to operate correctly as well.
@@ -22,7 +22,7 @@ Signed-off-by: Stefan Agner <stefan@agner.ch>
  1 file changed, 1 insertion(+)
 
 diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c
-index fad616cac01e..2214b974f748 100644
+index 9803d44bb157..9a6722a1dc19 100644
 --- a/drivers/clk/meson/g12a.c
 +++ b/drivers/clk/meson/g12a.c
 @@ -298,6 +298,7 @@ static struct clk_regmap g12a_fclk_div2 = {
@@ -34,5 +34,5 @@ index fad616cac01e..2214b974f748 100644
  };
  
 -- 
-2.29.2
+2.28.0
 

buildroot-external/board/hardkernel/patches/linux/0007-arm64-dts-meson-odroid-n2-add-jack-audio-output-supp.patch

@@ -1,171 +0,0 @@
-From 26603168f26468ac1872fcbcd703d2cd5a626310 Mon Sep 17 00:00:00 2001
-Message-Id: <26603168f26468ac1872fcbcd703d2cd5a626310.1606830718.git.stefan@agner.ch>
-In-Reply-To: <59bbf3567b02c36edfa4ee013d7e7e8c492756f2.1606830718.git.stefan@agner.ch>
-References: <59bbf3567b02c36edfa4ee013d7e7e8c492756f2.1606830718.git.stefan@agner.ch>
-From: Jerome Brunet <jbrunet@baylibre.com>
-Date: Mon, 15 Jun 2020 16:34:37 +0200
-Subject: [PATCH 07/17] arm64: dts: meson: odroid-n2: add jack audio output
- support
-
-Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
----
- .../boot/dts/amlogic/meson-g12b-odroid-n2.dts | 79 +++++++++++++++++--
- 1 file changed, 74 insertions(+), 5 deletions(-)
-
-diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
-index d4421ad164bd..34fffa6d859d 100644
---- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
-+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
-@@ -9,6 +9,7 @@
- #include "meson-g12b-s922x.dtsi"
- #include <dt-bindings/input/input.h>
- #include <dt-bindings/gpio/meson-g12a-gpio.h>
-+#include <dt-bindings/sound/meson-g12a-toacodec.h>
- #include <dt-bindings/sound/meson-g12a-tohdmitx.h>
- 
- / {
-@@ -20,6 +21,14 @@ aliases {
- 		ethernet0 = &ethmac;
- 	};
- 
-+	dioo2133: audio-amplifier-0 {
-+		compatible = "simple-audio-amplifier";
-+		enable-gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
-+		VCC-supply = <&vcc_5v>;
-+		sound-name-prefix = "U19";
-+		status = "okay";
-+	};
-+
- 	chosen {
- 		stdout-path = "serial0:115200n8";
- 	};
-@@ -209,16 +218,26 @@ hdmi_connector_in: endpoint {
- 	sound {
- 		compatible = "amlogic,axg-sound-card";
- 		model = "G12B-ODROID-N2";
--		audio-aux-devs = <&tdmout_b>, <&tdmin_a>, <&tdmin_b>,
--				 <&tdmin_c>, <&tdmin_lb>;
-+		audio-widgets = "Line", "Lineout";
-+		audio-aux-devs = <&tdmout_b>, <&tdmout_c>, <&tdmin_a>,
-+				 <&tdmin_b>, <&tdmin_c>, <&tdmin_lb>,
-+				 <&dioo2133>;
- 		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
- 				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
- 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
- 				"TDM_B Playback", "TDMOUT_B OUT",
-+				"TDMOUT_C IN 0", "FRDDR_A OUT 2",
-+				"TDMOUT_C IN 1", "FRDDR_B OUT 2",
-+				"TDMOUT_C IN 2", "FRDDR_C OUT 2",
-+				"TDM_C Playback", "TDMOUT_C OUT",
- 				"TDMIN_A IN 4", "TDM_B Loopback",
- 				"TDMIN_B IN 4", "TDM_B Loopback",
- 				"TDMIN_C IN 4", "TDM_B Loopback",
- 				"TDMIN_LB IN 1", "TDM_B Loopback",
-+				"TDMIN_A IN 5", "TDM_C Loopback",
-+				"TDMIN_B IN 5", "TDM_C Loopback",
-+				"TDMIN_C IN 5", "TDM_C Loopback",
-+				"TDMIN_LB IN 2", "TDM_C Loopback",
- 				"TODDR_A IN 0", "TDMIN_A OUT",
- 				"TODDR_B IN 0", "TDMIN_A OUT",
- 				"TODDR_C IN 0", "TDMIN_A OUT",
-@@ -230,7 +249,11 @@ sound {
- 				"TODDR_C IN 2", "TDMIN_C OUT",
- 				"TODDR_A IN 6", "TDMIN_LB OUT",
- 				"TODDR_B IN 6", "TDMIN_LB OUT",
--				"TODDR_C IN 6", "TDMIN_LB OUT";
-+				"TODDR_C IN 6", "TDMIN_LB OUT",
-+				"U19 INL", "ACODEC LOLP",
-+				"U19 INR", "ACODEC LORP",
-+				"Lineout", "U19 OUTL",
-+				"Lineout", "U19 OUTR";
- 
- 		assigned-clocks = <&clkc CLKID_MPLL2>,
- 				  <&clkc CLKID_MPLL0>,
-@@ -275,22 +298,56 @@ dai-link-6 {
- 			dai-tdm-slot-tx-mask-3 = <1 1>;
- 			mclk-fs = <256>;
- 
--			codec {
-+			codec-0 {
- 				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
- 			};
-+
-+			codec-1 {
-+				sound-dai = <&toacodec TOACODEC_IN_B>;
-+			};
- 		};
- 
--		/* hdmi glue */
-+		/* i2s jack output interface */
- 		dai-link-7 {
-+			sound-dai = <&tdmif_c>;
-+			dai-format = "i2s";
-+			dai-tdm-slot-tx-mask-0 = <1 1>;
-+			mclk-fs = <256>;
-+
-+			codec-0 {
-+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>;
-+			};
-+
-+			codec-1 {
-+				sound-dai = <&toacodec TOACODEC_IN_C>;
-+			};
-+		};
-+
-+		/* hdmi glue */
-+		dai-link-8 {
- 			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
- 
- 			codec {
- 				sound-dai = <&hdmi_tx>;
- 			};
- 		};
-+
-+		/* acodec glue */
-+		dai-link-9 {
-+			sound-dai = <&toacodec TOACODEC_OUT>;
-+
-+			codec {
-+				sound-dai = <&acodec>;
-+			};
-+		};
- 	};
- };
- 
-+&acodec {
-+	AVDD-supply = <&vddao_1v8>;
-+	status = "okay";
-+};
-+
- &arb {
- 	status = "okay";
- };
-@@ -505,6 +562,10 @@ &tdmif_b {
- 	status = "okay";
- };
- 
-+&tdmif_c {
-+	status = "okay";
-+};
-+
- &tdmin_a {
- 	status = "okay";
- };
-@@ -525,6 +586,14 @@ &tdmout_b {
- 	status = "okay";
- };
- 
-+&tdmout_c {
-+	status = "okay";
-+};
-+
-+&toacodec {
-+	status = "okay";
-+};
-+
- &tohdmitx {
- 	status = "okay";
- };
--- 
-2.29.2
-

buildroot-external/board/hardkernel/patches/linux/0008-arm64-dts-meson-add-RTC-to-ODROID-N2-boards.patch

@@ -1,10 +1,10 @@
-From 9a736bfb2ee71ed09e5f37ec4a506e7bd2a80bf5 Mon Sep 17 00:00:00 2001
-Message-Id: <9a736bfb2ee71ed09e5f37ec4a506e7bd2a80bf5.1606830718.git.stefan@agner.ch>
-In-Reply-To: <59bbf3567b02c36edfa4ee013d7e7e8c492756f2.1606830718.git.stefan@agner.ch>
-References: <59bbf3567b02c36edfa4ee013d7e7e8c492756f2.1606830718.git.stefan@agner.ch>
+From 75b8900d6750fa9d44546219a9b925c5df73a985 Mon Sep 17 00:00:00 2001
+Message-Id: <75b8900d6750fa9d44546219a9b925c5df73a985.1605564817.git.stefan@agner.ch>
+In-Reply-To: <734f52f38625ce29c964517255538b3b0b546e8d.1605564817.git.stefan@agner.ch>
+References: <734f52f38625ce29c964517255538b3b0b546e8d.1605564817.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Mon, 16 Nov 2020 23:11:02 +0100
-Subject: [PATCH 15/17] arm64: dts: meson: add RTC to ODROID-N2 boards
+Subject: [PATCH 8/8] arm64: dts: meson: add RTC to ODROID-N2 boards
 
 All ODROID-N2 boards come with a NXP PCF8563TS RTC connected to I2C bus
 3. This is the RTC which is connected to the on-board RTC backup battery.

buildroot-external/board/hardkernel/patches/linux/0011-arm64-dts-meson-add-missing-g12-rng-clock.patch

@@ -1,38 +0,0 @@
-From ab2773aa8ea7ff7f30c104bd3a1f93b67c5eac32 Mon Sep 17 00:00:00 2001
-Message-Id: <ab2773aa8ea7ff7f30c104bd3a1f93b67c5eac32.1606830718.git.stefan@agner.ch>
-In-Reply-To: <59bbf3567b02c36edfa4ee013d7e7e8c492756f2.1606830718.git.stefan@agner.ch>
-References: <59bbf3567b02c36edfa4ee013d7e7e8c492756f2.1606830718.git.stefan@agner.ch>
-From: Scott K Logan <logans@cottsay.net>
-Date: Fri, 25 Sep 2020 01:43:53 -0700
-Subject: [PATCH 11/17] arm64: dts: meson: add missing g12 rng clock
-
-This adds the missing perpheral clock for the RNG for Amlogic G12. As
-stated in amlogic,meson-rng.yaml, this isn't always necessary for the
-RNG to function, but is better to have in case the clock is disabled for
-some reason prior to loading.
-
-Signed-off-by: Scott K Logan <logans@cottsay.net>
-Suggested-by: Neil Armstrong <narmstrong@baylibre.com>
-Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
-Signed-off-by: Kevin Hilman <khilman@baylibre.com>
-Link: https://lore.kernel.org/r/520a1a8ec7a958b3d918d89563ec7e93a4100a45.camel@cottsay.net
----
- arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 2 ++
- 1 file changed, 2 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
-index 593a006f4b7b..6ec40af658ba 100644
---- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
-+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
-@@ -247,6 +247,8 @@ apb_efuse: bus@30000 {
- 				hwrng: rng@218 {
- 					compatible = "amlogic,meson-rng";
- 					reg = <0x0 0x218 0x0 0x4>;
-+					clocks = <&clkc CLKID_RNG0>;
-+					clock-names = "core";
- 				};
- 			};
- 
--- 
-2.29.2
-

buildroot-external/board/hardkernel/patches/linux/0014-usb-cdc-acm-fix-cooldown-mechanism.patch

@@ -1,126 +0,0 @@
-From 83fb88f53712d309ee106cdbd1dfe228d1649918 Mon Sep 17 00:00:00 2001
-Message-Id: <83fb88f53712d309ee106cdbd1dfe228d1649918.1606830718.git.stefan@agner.ch>
-In-Reply-To: <59bbf3567b02c36edfa4ee013d7e7e8c492756f2.1606830718.git.stefan@agner.ch>
-References: <59bbf3567b02c36edfa4ee013d7e7e8c492756f2.1606830718.git.stefan@agner.ch>
-From: Jerome Brunet <jbrunet@baylibre.com>
-Date: Mon, 19 Oct 2020 19:07:02 +0200
-Subject: [PATCH 14/17] usb: cdc-acm: fix cooldown mechanism
-
-Commit a4e7279cd1d1 ("cdc-acm: introduce a cool down") is causing
-regression if there is some USB error, such as -EPROTO.
-
-This has been reported on some samples of the Odroid-N2 using the Combee II
-Zibgee USB dongle.
-
-> struct acm *acm = container_of(work, struct acm, work)
-
-is incorrect in case of a delayed work and causes warnings, usually from
-the workqueue:
-
-> WARNING: CPU: 0 PID: 0 at kernel/workqueue.c:1474 __queue_work+0x480/0x528.
-
-When this happens, USB eventually stops working completely after a while.
-Also the ACM_ERROR_DELAY bit is never set, so the cooldown mechanism
-previously introduced cannot be triggered and acm_submit_read_urb() is
-never called.
-
-This changes makes the cdc-acm driver use a single delayed work, fixing the
-pointer arithmetic in acm_softint() and set the ACM_ERROR_DELAY when the
-cooldown mechanism appear to be needed.
-
-Fixes: a4e7279cd1d1 ("cdc-acm: introduce a cool down")
-Reported-by: Pascal Vizeli <pascal.vizeli@nabucasa.com>
-Cc: Oliver Neukum <oneukum@suse.com>
-Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
----
- drivers/usb/class/cdc-acm.c | 12 +++++-------
- drivers/usb/class/cdc-acm.h |  3 +--
- 2 files changed, 6 insertions(+), 9 deletions(-)
-
-diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
-index d5187b50fc82..76ae5a5d1ac2 100644
---- a/drivers/usb/class/cdc-acm.c
-+++ b/drivers/usb/class/cdc-acm.c
-@@ -509,6 +509,7 @@ static void acm_read_bulk_callback(struct urb *urb)
- 			"%s - cooling babbling device\n", __func__);
- 		usb_mark_last_busy(acm->dev);
- 		set_bit(rb->index, &acm->urbs_in_error_delay);
-+		set_bit(ACM_ERROR_DELAY, &acm->flags);
- 		cooldown = true;
- 		break;
- 	default:
-@@ -534,7 +535,7 @@ static void acm_read_bulk_callback(struct urb *urb)
- 
- 	if (stopped || stalled || cooldown) {
- 		if (stalled)
--			schedule_work(&acm->work);
-+			schedule_delayed_work(&acm->dwork, 0);
- 		else if (cooldown)
- 			schedule_delayed_work(&acm->dwork, HZ / 2);
- 		return;
-@@ -564,13 +565,13 @@ static void acm_write_bulk(struct urb *urb)
- 	acm_write_done(acm, wb);
- 	spin_unlock_irqrestore(&acm->write_lock, flags);
- 	set_bit(EVENT_TTY_WAKEUP, &acm->flags);
--	schedule_work(&acm->work);
-+	schedule_delayed_work(&acm->dwork, 0);
- }
- 
- static void acm_softint(struct work_struct *work)
- {
- 	int i;
--	struct acm *acm = container_of(work, struct acm, work);
-+	struct acm *acm = container_of(work, struct acm, dwork.work);
- 
- 	if (test_bit(EVENT_RX_STALL, &acm->flags)) {
- 		smp_mb(); /* against acm_suspend() */
-@@ -586,7 +587,7 @@ static void acm_softint(struct work_struct *work)
- 	if (test_and_clear_bit(ACM_ERROR_DELAY, &acm->flags)) {
- 		for (i = 0; i < acm->rx_buflimit; i++)
- 			if (test_and_clear_bit(i, &acm->urbs_in_error_delay))
--					acm_submit_read_urb(acm, i, GFP_NOIO);
-+				acm_submit_read_urb(acm, i, GFP_KERNEL);
- 	}
- 
- 	if (test_and_clear_bit(EVENT_TTY_WAKEUP, &acm->flags))
-@@ -1354,7 +1355,6 @@ static int acm_probe(struct usb_interface *intf,
- 	acm->ctrlsize = ctrlsize;
- 	acm->readsize = readsize;
- 	acm->rx_buflimit = num_rx_buf;
--	INIT_WORK(&acm->work, acm_softint);
- 	INIT_DELAYED_WORK(&acm->dwork, acm_softint);
- 	init_waitqueue_head(&acm->wioctl);
- 	spin_lock_init(&acm->write_lock);
-@@ -1564,7 +1564,6 @@ static void acm_disconnect(struct usb_interface *intf)
- 	}
- 
- 	acm_kill_urbs(acm);
--	cancel_work_sync(&acm->work);
- 	cancel_delayed_work_sync(&acm->dwork);
- 
- 	tty_unregister_device(acm_tty_driver, acm->minor);
-@@ -1607,7 +1606,6 @@ static int acm_suspend(struct usb_interface *intf, pm_message_t message)
- 		return 0;
- 
- 	acm_kill_urbs(acm);
--	cancel_work_sync(&acm->work);
- 	cancel_delayed_work_sync(&acm->dwork);
- 	acm->urbs_in_error_delay = 0;
- 
-diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h
-index cd5e9d8ab237..b95ff769072e 100644
---- a/drivers/usb/class/cdc-acm.h
-+++ b/drivers/usb/class/cdc-acm.h
-@@ -112,8 +112,7 @@ struct acm {
- #		define ACM_ERROR_DELAY	3
- 	unsigned long urbs_in_error_delay;		/* these need to be restarted after a delay */
- 	struct usb_cdc_line_coding line;		/* bits, stop, parity */
--	struct work_struct work;			/* work queue entry for various purposes*/
--	struct delayed_work dwork;			/* for cool downs needed in error recovery */
-+	struct delayed_work dwork;		        /* work queue entry for various purposes */
- 	unsigned int ctrlin;				/* input control lines (DCD, DSR, RI, break, overruns) */
- 	unsigned int ctrlout;				/* output control lines (DTR, RTS) */
- 	struct async_icount iocount;			/* counters for control line changes */
--- 
-2.29.2
-

buildroot-external/board/hardkernel/patches/linux/0016-arm64-dts-meson-g12b-odroid-n2-fix-PHY-deassert-timi.patch

@@ -1,41 +0,0 @@
-From 3484ac6d1c47a7a83a8aa9d498e6133b6370add8 Mon Sep 17 00:00:00 2001
-Message-Id: <3484ac6d1c47a7a83a8aa9d498e6133b6370add8.1606830718.git.stefan@agner.ch>
-In-Reply-To: <59bbf3567b02c36edfa4ee013d7e7e8c492756f2.1606830718.git.stefan@agner.ch>
-References: <59bbf3567b02c36edfa4ee013d7e7e8c492756f2.1606830718.git.stefan@agner.ch>
-From: Stefan Agner <stefan@agner.ch>
-Date: Tue, 1 Dec 2020 00:32:23 +0100
-Subject: [PATCH 16/17] arm64: dts: meson: g12b: odroid-n2: fix PHY deassert
- timing requirements
-
-According to the datasheet (Rev. 1.9) the RTL8211F requires at least
-72ms "for internal circuits settling time" before accessing the PHY
-egisters. This fixes an issue where the Ethernet link doesn't come up
-when using ip link set down/up:
-  [   29.360965] meson8b-dwmac ff3f0000.ethernet eth0: Link is Down
-  [   34.569012] meson8b-dwmac ff3f0000.ethernet eth0: PHY [0.0:00] driver [RTL8211F Gigabit Ethernet] (irq=31)
-  [   34.676732] meson8b-dwmac ff3f0000.ethernet: Failed to reset the dma
-  [   34.678874] meson8b-dwmac ff3f0000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
-  [   34.687850] meson8b-dwmac ff3f0000.ethernet eth0: stmmac_open: Hw setup failed
-
-Fixes: 658e4129bb81 ("arm64: dts: meson: g12b: odroid-n2: add the Ethernet PHY reset line")
-Signed-off-by: Stefan Agner <stefan@agner.ch>
----
- arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-index 40390feba053..445d90d25aa3 100644
---- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-@@ -415,7 +415,7 @@ external_phy: ethernet-phy@0 {
- 		max-speed = <1000>;
- 
- 		reset-assert-us = <10000>;
--		reset-deassert-us = <30000>;
-+		reset-deassert-us = <80000>;
- 		reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
- 
- 		interrupt-parent = <&gpio_intc>;
--- 
-2.29.2
-

buildroot-external/board/hardkernel/patches/linux/0017-arm64-dts-meson-fix-PHY-deassert-timing-requirements.patch

@@ -1,152 +0,0 @@
-From a67170b5bebe0e2c9b46e4439a47ff492f4538ce Mon Sep 17 00:00:00 2001
-Message-Id: <a67170b5bebe0e2c9b46e4439a47ff492f4538ce.1606830718.git.stefan@agner.ch>
-In-Reply-To: <59bbf3567b02c36edfa4ee013d7e7e8c492756f2.1606830718.git.stefan@agner.ch>
-References: <59bbf3567b02c36edfa4ee013d7e7e8c492756f2.1606830718.git.stefan@agner.ch>
-From: Stefan Agner <stefan@agner.ch>
-Date: Tue, 1 Dec 2020 00:32:23 +0100
-Subject: [PATCH 17/17] arm64: dts: meson: fix PHY deassert timing requirements
-
-According to the datasheet (Rev. 1.9) the RTL8211F requires at least
-72ms "for internal circuits settling time" before accessing the PHY
-egisters. This fixes an issue seen on ODROID-C2 where the Ethernet
-link doesn't come up when using ip link set down/up:
-  [ 6630.714855] meson8b-dwmac c9410000.ethernet eth0: Link is Down
-  [ 6630.785775] meson8b-dwmac c9410000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211F Gigabit Ethernet] (irq=36)
-  [ 6630.893071] meson8b-dwmac c9410000.ethernet: Failed to reset the dma
-  [ 6630.893800] meson8b-dwmac c9410000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
-  [ 6630.902835] meson8b-dwmac c9410000.ethernet eth0: stmmac_open: Hw setup failed
-
-Fixes: f29cabf240ed ("arm64: dts: meson: use the generic Ethernet PHY reset GPIO bindings")
-Signed-off-by: Stefan Agner <stefan@agner.ch>
----
- arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts  | 2 +-
- arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts   | 2 +-
- arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi  | 2 +-
- arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi     | 2 +-
- arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts  | 2 +-
- arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts | 2 +-
- arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts   | 2 +-
- arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts        | 2 +-
- arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts    | 2 +-
- 9 files changed, 9 insertions(+), 9 deletions(-)
-
-diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
-index 7be3e354093b..de27beafe9db 100644
---- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
-+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
-@@ -165,7 +165,7 @@ eth_phy0: ethernet-phy@0 {
- 			reg = <0>;
- 
- 			reset-assert-us = <10000>;
--			reset-deassert-us = <30000>;
-+			reset-deassert-us = <80000>;
- 			reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
- 
- 			interrupt-parent = <&gpio_intc>;
-diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
-index 70fcfb7b0683..50de1d01e565 100644
---- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
-+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
-@@ -200,7 +200,7 @@ eth_phy0: ethernet-phy@0 {
- 			reg = <0>;
- 
- 			reset-assert-us = <10000>;
--			reset-deassert-us = <30000>;
-+			reset-deassert-us = <80000>;
- 			reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
- 
- 			interrupt-parent = <&gpio_intc>;
-diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
-index 222ee8069cfa..9b0b81f191f1 100644
---- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
-+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
-@@ -126,7 +126,7 @@ eth_phy0: ethernet-phy@0 {
- 			reg = <0>;
- 
- 			reset-assert-us = <10000>;
--			reset-deassert-us = <30000>;
-+			reset-deassert-us = <80000>;
- 			reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
- 
- 			interrupt-parent = <&gpio_intc>;
-diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
-index d6133af09d64..834b2877e025 100644
---- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
-+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
-@@ -147,7 +147,7 @@ eth_phy0: ethernet-phy@0 {
- 			reg = <0>;
- 
- 			reset-assert-us = <10000>;
--			reset-deassert-us = <30000>;
-+			reset-deassert-us = <80000>;
- 			reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
- 		};
- 	};
-diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
-index b08c4537f260..b2ab05c22090 100644
---- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
-+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
-@@ -82,7 +82,7 @@ external_phy: ethernet-phy@0 {
- 
- 		/* External PHY reset is shared with internal PHY Led signal */
- 		reset-assert-us = <10000>;
--		reset-deassert-us = <30000>;
-+		reset-deassert-us = <80000>;
- 		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
- 
- 		interrupt-parent = <&gpio_intc>;
-diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
-index 27eeab71ec77..b4ca43aef303 100644
---- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
-+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
-@@ -194,7 +194,7 @@ external_phy: ethernet-phy@0 {
- 		reg = <0>;
- 
- 		reset-assert-us = <10000>;
--		reset-deassert-us = <30000>;
-+		reset-deassert-us = <80000>;
- 		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
- 
- 		interrupt-parent = <&gpio_intc>;
-diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
-index c2bd4dbbf38c..8dccf91d68da 100644
---- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
-+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
-@@ -112,7 +112,7 @@ external_phy: ethernet-phy@0 {
- 		max-speed = <1000>;
- 
- 		reset-assert-us = <10000>;
--		reset-deassert-us = <30000>;
-+		reset-deassert-us = <80000>;
- 		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
- 	};
- };
-diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts
-index ea45ae0c71b7..8edbfe040805 100644
---- a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts
-+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts
-@@ -64,7 +64,7 @@ external_phy: ethernet-phy@0 {
- 
- 		/* External PHY reset is shared with internal PHY Led signal */
- 		reset-assert-us = <10000>;
--		reset-deassert-us = <30000>;
-+		reset-deassert-us = <80000>;
- 		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
- 
- 		interrupt-parent = <&gpio_intc>;
-diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
-index c89c9f846fb1..dde7cfe12cff 100644
---- a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
-+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
-@@ -114,7 +114,7 @@ external_phy: ethernet-phy@0 {
- 		max-speed = <1000>;
- 
- 		reset-assert-us = <10000>;
--		reset-deassert-us = <30000>;
-+		reset-deassert-us = <80000>;
- 		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
- 	};
- };
--- 
-2.29.2
-

buildroot-external/board/hardkernel/patches/uboot/0001-ARM-meson-isolate-loading-of-socinfo.patch

@@ -1,24 +1,22 @@
-From fb41bcaf0e61e78bc40addb1312040a2bc6a69b7 Mon Sep 17 00:00:00 2001
-Message-Id: <fb41bcaf0e61e78bc40addb1312040a2bc6a69b7.1598875349.git.stefan@agner.ch>
-In-Reply-To: <c12338d22649e46aed12ebe60d897112f045fda9.1598875349.git.stefan@agner.ch>
-References: <c12338d22649e46aed12ebe60d897112f045fda9.1598875349.git.stefan@agner.ch>
+From f9877c2895d6c05710a828d0cd46d9f25626b070 Mon Sep 17 00:00:00 2001
+Message-Id: <f9877c2895d6c05710a828d0cd46d9f25626b070.1606490648.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Mon, 31 Aug 2020 13:40:18 +0200
-Subject: [PATCH 2/4] ARM: meson: isolate loading of socinfo
+Subject: [PATCH 1/2] ARM: meson: isolate loading of socinfo
 
 Move loading of socinfo into a separate function so the value can be
 reused later.
 
 Signed-off-by: Stefan Agner <stefan@agner.ch>
 ---
- arch/arm/mach-meson/board-info.c | 20 ++++++++++++++++++--
- 1 file changed, 18 insertions(+), 2 deletions(-)
+ arch/arm/mach-meson/board-info.c | 14 +++++++++++++-
+ 1 file changed, 13 insertions(+), 1 deletion(-)
 
 diff --git a/arch/arm/mach-meson/board-info.c b/arch/arm/mach-meson/board-info.c
-index 0d3b40a249..e305d60dca 100644
+index 3abb27e03b..c585b12ca5 100644
 --- a/arch/arm/mach-meson/board-info.c
 +++ b/arch/arm/mach-meson/board-info.c
-@@ -123,12 +123,16 @@ static void print_board_model(void)
+@@ -126,7 +126,7 @@ static void print_board_model(void)
  	printf("Model: %s\n", model ? model : "Unknown");
  }
  
@@ -27,17 +25,7 @@ index 0d3b40a249..e305d60dca 100644
  {
  	struct regmap *regmap;
  	int nodeoffset, ret;
- 	ofnode node;
--	unsigned int socinfo;
-+	static unsigned int socinfo = 0;
-+
-+	/* Empty socinfo is invalid, so !socinfo is successfully initialized */
-+	if (socinfo)
-+		return socinfo;
- 
- 	/* find the offset of compatible node */
- 	nodeoffset = fdt_node_offset_by_compatible(gd->fdt_blob, -1,
-@@ -155,8 +159,20 @@ int show_board_info(void)
+@@ -158,8 +158,20 @@ int show_board_info(void)
  		return 0;
  	}
  
@@ -59,5 +47,5 @@ index 0d3b40a249..e305d60dca 100644
  	       socinfo_to_soc_id(socinfo),
  	       socinfo_to_package_id(socinfo),
 -- 
-2.28.0
+2.29.2
 

buildroot-external/board/hardkernel/patches/uboot/0001-Amlogic-w400-read-ethaddr-from-efuse.patch

@@ -1,55 +0,0 @@
-From b93c598b1acfe59ffac342d114483af8a45a78ac Mon Sep 17 00:00:00 2001
-From: Pascal Vizeli <pvizeli@syshack.ch>
-Date: Sat, 1 Feb 2020 20:55:39 +0000
-Subject: [PATCH 1/1] Amlogic w400: read ethaddr from efuse
-
-Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch>
----
- board/amlogic/w400/w400.c | 25 ++++++++++++++++++++++++-
- 1 file changed, 24 insertions(+), 1 deletion(-)
-
-diff --git a/board/amlogic/w400/w400.c b/board/amlogic/w400/w400.c
-index e60dc3a622..d4028c6a39 100644
---- a/board/amlogic/w400/w400.c
-+++ b/board/amlogic/w400/w400.c
-@@ -6,13 +6,36 @@
- 
- #include <common.h>
- #include <dm.h>
--#include <env_internal.h>
-+#include <env.h>
- #include <asm/io.h>
-+#include <asm/arch/sm.h>
- #include <asm/arch/eth.h>
- 
-+#define EFUSE_MAC_OFFSET	20
-+#define EFUSE_MAC_SIZE		12
-+
- int misc_init_r(void)
- {
-+	u8 mac_addr[6];
-+	char efuse_mac_addr[EFUSE_MAC_SIZE], buff[3];
-+	ssize_t len;
-+
- 	meson_eth_init(PHY_INTERFACE_MODE_RGMII, 0);
- 
-+	if (!eth_env_get_enetaddr("ethaddr", mac_addr)) {
-+		len = meson_sm_read_efuse(EFUSE_MAC_OFFSET,
-+					  efuse_mac_addr, EFUSE_MAC_SIZE);
-+		if (len != EFUSE_MAC_SIZE)
-+			return 0;
-+
-+		for (int i = 0; i < 6; i++){
-+			buff[0] = efuse_mac_addr[i * 2];
-+			buff[1] = efuse_mac_addr[i * 2 + 1];
-+			mac_addr[i] = simple_strtoul(buff, NULL, 16);
-+		}
-+		if(is_valid_ethaddr(mac_addr))
-+			eth_env_set_enetaddr("ethaddr", mac_addr);
-+	}
-+
- 	return 0;
- }
--- 
-2.17.1
-

buildroot-external/board/hardkernel/patches/uboot/0002-meson-Add-board_rev-to-env.patch

@@ -1,17 +1,17 @@
-From 15ce807d420324bc209772b843d4004619e0cdaf Mon Sep 17 00:00:00 2001
-Message-Id: <15ce807d420324bc209772b843d4004619e0cdaf.1598875349.git.stefan@agner.ch>
-In-Reply-To: <c12338d22649e46aed12ebe60d897112f045fda9.1598875349.git.stefan@agner.ch>
-References: <c12338d22649e46aed12ebe60d897112f045fda9.1598875349.git.stefan@agner.ch>
+From 31e32295dc261032d7f5540a0b7f79a4f5a5b807 Mon Sep 17 00:00:00 2001
+Message-Id: <31e32295dc261032d7f5540a0b7f79a4f5a5b807.1606490648.git.stefan@agner.ch>
+In-Reply-To: <f9877c2895d6c05710a828d0cd46d9f25626b070.1606490648.git.stefan@agner.ch>
+References: <f9877c2895d6c05710a828d0cd46d9f25626b070.1606490648.git.stefan@agner.ch>
 From: Pascal Vizeli <pvizeli@syshack.ch>
 Date: Tue, 4 Aug 2020 13:50:57 +0000
-Subject: [PATCH 3/4] meson: Add board_rev to env
+Subject: [PATCH 2/2] meson: Add board_rev to env
 
 Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch>
 Signed-off-by: Stefan Agner <stefan@agner.ch>
 ---
  arch/arm/include/asm/arch-meson/boot.h |  4 ++++
  arch/arm/mach-meson/board-info.c       | 12 ++++++++++++
- board/amlogic/w400/w400.c              |  5 +++++
+ board/amlogic/odroid-n2/odroid-n2.c    |  5 +++++
  3 files changed, 21 insertions(+)
 
 diff --git a/arch/arm/include/asm/arch-meson/boot.h b/arch/arm/include/asm/arch-meson/boot.h
@@ -35,10 +35,10 @@ index a90fe55081..c67d12d06c 100644
 +
  #endif /* __MESON_BOOT_H__ */
 diff --git a/arch/arm/mach-meson/board-info.c b/arch/arm/mach-meson/board-info.c
-index e305d60dca..3c40d6cd27 100644
+index c585b12ca5..9dbb997281 100644
 --- a/arch/arm/mach-meson/board-info.c
 +++ b/arch/arm/mach-meson/board-info.c
-@@ -183,3 +183,15 @@ int show_board_info(void)
+@@ -182,3 +182,15 @@ int show_board_info(void)
  
  	return 0;
  }
@@ -54,11 +54,11 @@ index e305d60dca..3c40d6cd27 100644
 +	/* Write SoC info */
 +	return snprintf(buff, buff_len, "%x", socinfo_to_minor(socinfo));
 +}
-diff --git a/board/amlogic/w400/w400.c b/board/amlogic/w400/w400.c
-index d74aab899a..cb2e5edf5e 100644
---- a/board/amlogic/w400/w400.c
-+++ b/board/amlogic/w400/w400.c
-@@ -10,6 +10,7 @@
+diff --git a/board/amlogic/odroid-n2/odroid-n2.c b/board/amlogic/odroid-n2/odroid-n2.c
+index caf7fd6810..c2a191ba6a 100644
+--- a/board/amlogic/odroid-n2/odroid-n2.c
++++ b/board/amlogic/odroid-n2/odroid-n2.c
+@@ -12,6 +12,7 @@
  #include <asm/io.h>
  #include <asm/arch/sm.h>
  #include <asm/arch/eth.h>
@@ -66,17 +66,17 @@ index d74aab899a..cb2e5edf5e 100644
  
  #define EFUSE_MAC_OFFSET	20
  #define EFUSE_MAC_SIZE		12
-@@ -20,6 +21,10 @@ int misc_init_r(void)
- 	char efuse_mac_addr[EFUSE_MAC_SIZE], buff[3];
+@@ -23,6 +24,10 @@ int misc_init_r(void)
+ 	char efuse_mac_addr[EFUSE_MAC_SIZE], tmp[3];
  	ssize_t len;
  
-+	if (meson_get_soc_rev(buff, sizeof(buff))) {
-+		env_set("board_rev", buff);
++	if (meson_get_soc_rev(tmp, sizeof(tmp)) > 0) {
++		env_set("board_rev", tmp);
 +	}
 +
  	meson_eth_init(PHY_INTERFACE_MODE_RGMII, 0);
  
  	if (!eth_env_get_enetaddr("ethaddr", mac_addr)) {
 -- 
-2.28.0
+2.29.2
 

buildroot-external/board/intel/nuc/hassos-hook.sh

@@ -15,6 +15,6 @@ function hassos_pre_image() {
 
 
 function hassos_post_image() {
-    convert_disk_image_gz
+    convert_disk_image_xz
 }
 

buildroot-external/board/intel/nuc/kernel.config

@@ -15,13 +15,3 @@ CONFIG_DRM_I915=m
 CONFIG_DRM_I915_CAPTURE_ERROR=y
 CONFIG_DRM_I915_COMPRESS_ERROR=y
 CONFIG_DRM_I915_USERPTR=y
-
-CONFIG_SND_HDA=y
-CONFIG_SND_HDA_CORE=y
-CONFIG_SND_HDA_GENERIC=y
-CONFIG_SND_HDA_INTEL=m
-CONFIG_SND_HDA_I915=m
-CONFIG_SND_HDA_CODEC_REALTEK=m
-CONFIG_SND_HDA_CODEC_ANALOG=m
-CONFIG_SND_HDA_CODEC_VIA=m
-CONFIG_SND_HDA_CODEC_HDMI=m

buildroot-external/board/intel/ova/hassos-hook.sh

@@ -22,18 +22,18 @@ function hassos_post_image() {
     # Virtual Disk images
     convert_disk_image_virtual
 
-    convert_disk_image_gz vmdk
-    convert_disk_image_gz vhdx
-    convert_disk_image_gz vdi
-    convert_disk_image_gz qcow2
+    convert_disk_image_xz vmdk
+    convert_disk_image_xz vhdx
+    convert_disk_image_xz vdi
+    convert_disk_image_xz qcow2
 
     # OVA
     mkdir -p "${OVA_DATA}"
     rm -f "${HDD_OVA}"
 
-    cp -a ${BOARD_DIR}/home-assistant.ovf "${OVA_DATA}/home-assistant.ovf"
+    cp -a "${BOARD_DIR}/home-assistant.ovf" "${OVA_DATA}/home-assistant.ovf"
     qemu-img convert -O vmdk -o subformat=streamOptimized "${HDD_IMG}" "${OVA_DATA}/home-assistant.vmdk"
-    (cd "${OVA_DATA}"; sha256sum --tag home-assistant.* >home-assistant.mf)
+    (cd "${OVA_DATA}" || exit 1; sha256sum --tag home-assistant.* >home-assistant.mf)
     tar -C "${OVA_DATA}" --owner=root --group=root -cf "${HDD_OVA}" home-assistant.ovf home-assistant.vmdk home-assistant.mf
 
     # Cleanup

buildroot-external/board/intel/ova/home-assistant.ovf

@@ -18,8 +18,8 @@
     <Name>Home Assistant</Name>
     <ProductSection>
       <Info>Meta-information about the installed software</Info>
-      <Product>Operating-System</Product>
-      <ProductUrl>https://home-assistant.io</ProductUrl>
+      <Product>Home Assistant Operating System</Product>
+      <ProductUrl>https://www.home-assistant.io</ProductUrl>
     </ProductSection>
     <OperatingSystemSection ovf:id="100" vmw:osType="other4xLinux64Guest">
       <Info>The kind of installed guest operating system</Info>
@@ -89,6 +89,13 @@
         <rasd:ResourceSubType>E1000</rasd:ResourceSubType>
         <rasd:ResourceType>10</rasd:ResourceType>
       </Item>
+      <Item ovf:required="false">
+        <rasd:AutomaticAllocation>true</rasd:AutomaticAllocation>
+        <rasd:ElementName>Audio</rasd:ElementName>
+        <rasd:InstanceID>11</rasd:InstanceID>
+        <rasd:ResourceSubType>vmware.soundcard.hdaudio</rasd:ResourceSubType>
+        <rasd:ResourceType>1</rasd:ResourceType>
+      </Item>
       <vmw:Config ovf:required="false" vmw:key="firmware" vmw:value="efi"/>
       <vmw:ExtraConfig ovf:required="false" vmw:key="cpuid.coresPerSocket" vmw:value="2"/>
       <vmw:ExtraConfig ovf:required="false" vmw:key="svga.present" vmw:value="TRUE"/>
@@ -121,11 +128,11 @@
           </Controllers>
         </USB>
         <Network>
-          <Adapter slot="0" enabled="true" type="82540EM">
+          <Adapter slot="0" enabled="true" type="virtio">
             <BridgedInterface />
           </Adapter>
         </Network>
-        <AudioAdapter driver="Null" enabled="false"/>
+        <AudioAdapter controller="HDA" enabled="true"/>
         <RTC localOrUTC="UTC"/>
       </Hardware>
       <StorageControllers>

buildroot-external/board/intel/ova/kernel.config

@@ -37,4 +37,10 @@ CONFIG_HYPERV_KEYBOARD=m
 CONFIG_HYPERV_STORAGE=y
 CONFIG_HYPERV_NET=y
 CONFIG_HYPERV_VSOCKETS=m
+CONFIG_PCI_HYPERV=m
+CONFIG_PCI_HYPERV_INTERFACE=m
 CONFIG_FB_HYPERV=y
+
+CONFIG_IGBVF=m
+CONFIG_IXGBEVF=m
+CONFIG_I40EVF=m

buildroot-external/board/intel/ova/meta

@@ -5,6 +5,6 @@ BOOTLOADER=barebox
 KERNEL_FILE=bzImage
 BOOT_SYS=efi
 BOOT_SPL=false
-DISK_SIZE=6
+DISK_SIZE=32
 SUPERVISOR_MACHINE=qemux86-64
 SUPERVISOR_ARCH=amd64

buildroot-external/board/raspberrypi/boot-env.txt

@@ -9,6 +9,9 @@ kernel=u-boot.bin
 # uncomment for aarch64 bit support
 #arm_64bit=1
 
+# uncomment to enable primary UART console
+#enable_uart=1
+
 # uncomment if you get no picture on HDMI for a default "safe" mode
 #hdmi_safe=1
 
@@ -46,8 +49,8 @@ kernel=u-boot.bin
 # uncomment for composite PAL
 #sdtv_mode=2
 
-#uncomment to overclock the arm. 700 MHz is the default.
-#arm_freq=800
+# Uncomment to disable continous SD-card poll (for USB SSD)
+#dtparam=sd_poll_once=on
 
 # Uncomment some or all of these to enable the optional hardware interfaces
 #dtparam=i2c_arm=on

buildroot-external/board/raspberrypi/hassos-hook.sh

@@ -15,6 +15,8 @@ function hassos_pre_image() {
     if [[ "${BOARD_ID}" =~ "rpi4" ]]; then
         cp "${BINARIES_DIR}/rpi-firmware/fixup.dat" "${BOOT_DATA}/fixup4.dat" 
         cp "${BINARIES_DIR}/rpi-firmware/start.elf" "${BOOT_DATA}/start4.elf" 
+        cp "${BINARIES_DIR}/rpi-eeprom/pieeprom.sig" "${BOOT_DATA}/pieeprom.sig"
+        cp "${BINARIES_DIR}/rpi-eeprom/pieeprom.upd" "${BOOT_DATA}/pieeprom.upd"
     else
         cp -t "${BOOT_DATA}" \
             "${BINARIES_DIR}/rpi-firmware/fixup.dat" \
@@ -33,6 +35,6 @@ function hassos_pre_image() {
 
 
 function hassos_post_image() {
-    convert_disk_image_gz
+    convert_disk_image_xz
 }
 

buildroot-external/board/raspberrypi/kernel.config

@@ -0,0 +1,2 @@
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_AUTOFS_FS is not set

buildroot-external/board/raspberrypi/patches/linux/0001-brcmfmac-add-FT-based-AKMs-in-brcmf_set_key_mgmt-for.patch

@@ -1,50 +0,0 @@
-From d6fc5f89ac905cb3efc9c61ce79dbfad5d91883b Mon Sep 17 00:00:00 2001
-Message-Id: <d6fc5f89ac905cb3efc9c61ce79dbfad5d91883b.1604607313.git.stefan@agner.ch>
-From: Chung-Hsien Hsu <stanley.hsu@cypress.com>
-Date: Wed, 15 Aug 2018 05:32:39 -0500
-Subject: [PATCH 1/3] brcmfmac: add FT-based AKMs in brcmf_set_key_mgmt() for
- FT support
-
-Add WLAN_AKM_SUITE_FT_8021X and WLAN_AKM_SUITE_FT_PSK in
-brcmf_set_key_mgmt() for FT support.
-
-Signed-off-by: Chung-Hsien Hsu <stanley.hsu@cypress.com>
-Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 6 ++++++
- .../net/wireless/broadcom/brcm80211/include/brcmu_wifi.h    | 1 +
- 2 files changed, 7 insertions(+)
-
-diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-index 71b7e5c19434..c312626c0a27 100644
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-@@ -1649,6 +1649,12 @@ brcmf_set_key_mgmt(struct net_device *ndev, struct cfg80211_connect_params *sme)
- 		case WLAN_AKM_SUITE_PSK:
- 			val = WPA2_AUTH_PSK;
- 			break;
-+		case WLAN_AKM_SUITE_FT_8021X:
-+			val = WPA2_AUTH_UNSPECIFIED | WPA2_AUTH_FT;
-+			break;
-+		case WLAN_AKM_SUITE_FT_PSK:
-+			val = WPA2_AUTH_PSK | WPA2_AUTH_FT;
-+			break;
- 		default:
- 			brcmf_err("invalid cipher group (%d)\n",
- 				  sme->crypto.cipher_group);
-diff --git a/drivers/net/wireless/broadcom/brcm80211/include/brcmu_wifi.h b/drivers/net/wireless/broadcom/brcm80211/include/brcmu_wifi.h
-index 75b2a0438cfa..dddebaa60352 100644
---- a/drivers/net/wireless/broadcom/brcm80211/include/brcmu_wifi.h
-+++ b/drivers/net/wireless/broadcom/brcm80211/include/brcmu_wifi.h
-@@ -239,6 +239,7 @@ static inline bool ac_bitmap_tst(u8 bitmap, int prec)
- #define WPA2_AUTH_RESERVED4	0x0400
- #define WPA2_AUTH_RESERVED5	0x0800
- #define WPA2_AUTH_1X_SHA256	0x1000  /* 1X with SHA256 key derivation */
-+#define WPA2_AUTH_FT		0x4000	/* Fast BSS Transition */
- #define WPA2_AUTH_PSK_SHA256	0x8000	/* PSK with SHA256 key derivation */
- 
- #define DOT11_DEFAULT_RTS_LEN		2347
--- 
-2.29.1
-

buildroot-external/board/raspberrypi/patches/linux/0001-dt-bindings-arm-bcm-Convert-BCM2835-firmware-binding.patch

@@ -0,0 +1,87 @@
+From 3651b4af52d63d4e37f40c7a6d0809b0a6c9dd73 Mon Sep 17 00:00:00 2001
+Message-Id: <3651b4af52d63d4e37f40c7a6d0809b0a6c9dd73.1605346684.git.stefan@agner.ch>
+From: Florian Fainelli <f.fainelli@gmail.com>
+Date: Mon, 15 Jun 2020 10:40:41 +0200
+Subject: [PATCH 1/8] dt-bindings: arm: bcm: Convert BCM2835 firmware binding
+ to YAML
+
+Convert the Raspberry Pi BCM2835 firmware binding document to YAML.
+Verified with dt_binding_check and dtbs_check.
+
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
+Signed-off-by: Maxime Ripard <maxime@cerno.tech>
+Link: https://lore.kernel.org/r/5bc0b9be8544b07300fccab4d4f26e5e5d8e62b2.1592210452.git-series.maxime@cerno.tech
+Signed-off-by: Stephen Boyd <sboyd@kernel.org>
+(cherry picked from commit d4c708c032df3d95de297232e20041737e99d126)
+---
+ .../arm/bcm/raspberrypi,bcm2835-firmware.txt  | 14 --------
+ .../arm/bcm/raspberrypi,bcm2835-firmware.yaml | 35 +++++++++++++++++++
+ 2 files changed, 35 insertions(+), 14 deletions(-)
+ delete mode 100644 Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.txt
+ create mode 100644 Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
+
+diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.txt b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.txt
+deleted file mode 100644
+index 6824b3180ffb..000000000000
+--- a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.txt
++++ /dev/null
+@@ -1,14 +0,0 @@
+-Raspberry Pi VideoCore firmware driver
+-
+-Required properties:
+-
+-- compatible:		Should be "raspberrypi,bcm2835-firmware"
+-- mboxes:		Phandle to the firmware device's Mailbox.
+-			  (See: ../mailbox/mailbox.txt for more information)
+-
+-Example:
+-
+-firmware {
+-	compatible = "raspberrypi,bcm2835-firmware";
+-	mboxes = <&mailbox>;
+-};
+diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
+new file mode 100644
+index 000000000000..cec540c052b6
+--- /dev/null
++++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
+@@ -0,0 +1,35 @@
++# SPDX-License-Identifier: GPL-2.0
++%YAML 1.2
++---
++$id: http://devicetree.org/schemas/arm/bcm/raspberrypi,bcm2835-firmware.yaml#
++$schema: http://devicetree.org/meta-schemas/core.yaml#
++
++title: Raspberry Pi VideoCore firmware driver
++
++maintainers:
++  - Eric Anholt <eric@anholt.net>
++  - Stefan Wahren <wahrenst@gmx.net>
++
++properties:
++  compatible:
++    items:
++      - const: raspberrypi,bcm2835-firmware
++      - const: simple-bus
++
++  mboxes:
++    $ref: '/schemas/types.yaml#/definitions/phandle'
++    description: |
++      Phandle to the firmware device's Mailbox.
++      (See: ../mailbox/mailbox.txt for more information)
++
++required:
++  - compatible
++  - mboxes
++
++examples:
++  - |
++    firmware {
++        compatible = "raspberrypi,bcm2835-firmware", "simple-bus";
++        mboxes = <&mailbox>;
++    };
++...
+-- 
+2.29.2
+

buildroot-external/board/raspberrypi/patches/linux/0002-CDC-ACM-heed-quirk-also-in-error-handling.patch

@@ -1,39 +0,0 @@
-From 1eaf50e14dfdda654e6acb2a1ee4c18cff346064 Mon Sep 17 00:00:00 2001
-Message-Id: <1eaf50e14dfdda654e6acb2a1ee4c18cff346064.1604607313.git.stefan@agner.ch>
-In-Reply-To: <d6fc5f89ac905cb3efc9c61ce79dbfad5d91883b.1604607313.git.stefan@agner.ch>
-References: <d6fc5f89ac905cb3efc9c61ce79dbfad5d91883b.1604607313.git.stefan@agner.ch>
-From: Oliver Neukum <oneukum@suse.com>
-Date: Tue, 26 May 2020 14:44:20 +0200
-Subject: [PATCH 2/3] CDC-ACM: heed quirk also in error handling
-
-commit 97fe809934dd2b0b37dfef3a2fc70417f485d7af upstream.
-
-If buffers are iterated over in the error case, the lower limits
-for quirky devices must be heeded.
-
-Signed-off-by: Oliver Neukum <oneukum@suse.com>
-Reported-by: Jean Rene Dawin <jdawin@math.uni-bielefeld.de>
-Fixes: a4e7279cd1d19 ("cdc-acm: introduce a cool down")
-Cc: stable <stable@vger.kernel.org>
-Link: https://lore.kernel.org/r/20200526124420.22160-1-oneukum@suse.com
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/usb/class/cdc-acm.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
-index 10ba1b4f0dbf..e8b9b27937ed 100644
---- a/drivers/usb/class/cdc-acm.c
-+++ b/drivers/usb/class/cdc-acm.c
-@@ -590,7 +590,7 @@ static void acm_softint(struct work_struct *work)
- 	}
- 
- 	if (test_and_clear_bit(ACM_ERROR_DELAY, &acm->flags)) {
--		for (i = 0; i < ACM_NR; i++)
-+		for (i = 0; i < acm->rx_buflimit; i++)
- 			if (test_and_clear_bit(i, &acm->urbs_in_error_delay))
- 					acm_submit_read_urb(acm, i, GFP_NOIO);
- 	}
--- 
-2.29.1
-

buildroot-external/board/raspberrypi/patches/linux/0002-dt-bindings-clock-Add-a-binding-for-the-RPi-Firmware.patch

@@ -0,0 +1,71 @@
+From 3ad7fb9329eabd1d7f692f612742ca5ac38854a5 Mon Sep 17 00:00:00 2001
+Message-Id: <3ad7fb9329eabd1d7f692f612742ca5ac38854a5.1605346684.git.stefan@agner.ch>
+In-Reply-To: <3651b4af52d63d4e37f40c7a6d0809b0a6c9dd73.1605346684.git.stefan@agner.ch>
+References: <3651b4af52d63d4e37f40c7a6d0809b0a6c9dd73.1605346684.git.stefan@agner.ch>
+From: Maxime Ripard <maxime@cerno.tech>
+Date: Mon, 15 Jun 2020 10:40:42 +0200
+Subject: [PATCH 2/8] dt-bindings: clock: Add a binding for the RPi Firmware
+ clocks
+
+The firmware running on the RPi VideoCore can be used to discover and
+change the various clocks running in the BCM2711. Since devices will
+need to use them through the DT, let's add a pretty simple binding.
+
+Cc: Michael Turquette <mturquette@baylibre.com>
+Cc: linux-clk@vger.kernel.org
+Cc: devicetree@vger.kernel.org
+Reviewed-by: Stephen Boyd <sboyd@kernel.org>
+Reviewed-by: Rob Herring <robh+dt@kernel.org>
+Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
+Signed-off-by: Maxime Ripard <maxime@cerno.tech>
+Link: https://lore.kernel.org/r/f6105207e7ef5a5ea8d7a1774faf989d341a25f5.1592210452.git-series.maxime@cerno.tech
+Signed-off-by: Stephen Boyd <sboyd@kernel.org>
+(cherry picked from commit 74a0caa5ef1c25905c4409b350ed9a8e0d9a3b74)
+---
+ .../arm/bcm/raspberrypi,bcm2835-firmware.yaml | 24 +++++++++++++++++++
+ 1 file changed, 24 insertions(+)
+
+diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
+index cec540c052b6..b48ed875eb8e 100644
+--- a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
++++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
+@@ -22,6 +22,25 @@ properties:
+       Phandle to the firmware device's Mailbox.
+       (See: ../mailbox/mailbox.txt for more information)
+ 
++  clocks:
++    type: object
++
++    properties:
++      compatible:
++        const: raspberrypi,firmware-clocks
++
++      "#clock-cells":
++        const: 1
++        description: >
++          The argument is the ID of the clocks contained by the
++          firmware messages.
++
++    required:
++      - compatible
++      - "#clock-cells"
++
++    additionalProperties: false
++
+ required:
+   - compatible
+   - mboxes
+@@ -31,5 +50,10 @@ examples:
+     firmware {
+         compatible = "raspberrypi,bcm2835-firmware", "simple-bus";
+         mboxes = <&mailbox>;
++
++        firmware_clocks: clocks {
++            compatible = "raspberrypi,firmware-clocks";
++            #clock-cells = <1>;
++        };
+     };
+ ...
+-- 
+2.29.2
+

buildroot-external/board/raspberrypi/patches/linux/0003-dt-bindings-arm-bcm-Add-a-select-to-the-RPI-Firmware.patch

@@ -0,0 +1,50 @@
+From 305aeb868929695699e04e26dd590e64ad3c42dd Mon Sep 17 00:00:00 2001
+Message-Id: <305aeb868929695699e04e26dd590e64ad3c42dd.1605346684.git.stefan@agner.ch>
+In-Reply-To: <3651b4af52d63d4e37f40c7a6d0809b0a6c9dd73.1605346684.git.stefan@agner.ch>
+References: <3651b4af52d63d4e37f40c7a6d0809b0a6c9dd73.1605346684.git.stefan@agner.ch>
+From: Maxime Ripard <maxime@cerno.tech>
+Date: Fri, 26 Jun 2020 13:54:33 +0200
+Subject: [PATCH 3/8] dt-bindings: arm: bcm: Add a select to the RPI Firmware
+ binding
+
+The RaspberryPi firmware binding uses two compatible, include simple-bus.
+The select statement generated by default will thus select any node that
+has simple-bus, not all of them being the raspberrypi firmware node.
+
+This results in warnings being wrongfully reported. Let's add a custom
+select statement to fix that.
+
+Fixes: d4c708c032df ("dt-bindings: arm: bcm: Convert BCM2835 firmware binding to YAML")
+Signed-off-by: Maxime Ripard <maxime@cerno.tech>
+Link: https://lore.kernel.org/r/20200626115433.125735-1-maxime@cerno.tech
+Acked-by: Florian Fainelli <f.fainelli@gmail.com>
+Acked-by: Rob Herring <robh@kernel.org>
+Signed-off-by: Stephen Boyd <sboyd@kernel.org>
+(cherry picked from commit 2a08a9232ba2e6103843870e68edae8e381eb02a)
+---
+ .../bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml   | 9 +++++++++
+ 1 file changed, 9 insertions(+)
+
+diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
+index b48ed875eb8e..17e4f20c8d39 100644
+--- a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
++++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
+@@ -10,6 +10,15 @@ maintainers:
+   - Eric Anholt <eric@anholt.net>
+   - Stefan Wahren <wahrenst@gmx.net>
+ 
++select:
++  properties:
++    compatible:
++      contains:
++        const: raspberrypi,bcm2835-firmware
++
++  required:
++    - compatible
++
+ properties:
+   compatible:
+     items:
+-- 
+2.29.2
+

buildroot-external/board/raspberrypi/patches/linux/0003-usb-cdc-acm-fix-cooldown-mechanism.patch

@@ -1,130 +0,0 @@
-From 930c59eeae2bdd02fa1327a69e4df70105f672e4 Mon Sep 17 00:00:00 2001
-Message-Id: <930c59eeae2bdd02fa1327a69e4df70105f672e4.1604607313.git.stefan@agner.ch>
-In-Reply-To: <d6fc5f89ac905cb3efc9c61ce79dbfad5d91883b.1604607313.git.stefan@agner.ch>
-References: <d6fc5f89ac905cb3efc9c61ce79dbfad5d91883b.1604607313.git.stefan@agner.ch>
-From: Jerome Brunet <jbrunet@baylibre.com>
-Date: Mon, 19 Oct 2020 19:07:02 +0200
-Subject: [PATCH 3/3] usb: cdc-acm: fix cooldown mechanism
-
-Commit a4e7279cd1d1 ("cdc-acm: introduce a cool down") is causing
-regression if there is some USB error, such as -EPROTO.
-
-This has been reported on some samples of the Odroid-N2 using the Combee II
-Zibgee USB dongle.
-
-> struct acm *acm = container_of(work, struct acm, work)
-
-is incorrect in case of a delayed work and causes warnings, usually from
-the workqueue:
-
-> WARNING: CPU: 0 PID: 0 at kernel/workqueue.c:1474 __queue_work+0x480/0x528.
-
-When this happens, USB eventually stops working completely after a while.
-Also the ACM_ERROR_DELAY bit is never set, so the cooldown mechanism
-previously introduced cannot be triggered and acm_submit_read_urb() is
-never called.
-
-This changes makes the cdc-acm driver use a single delayed work, fixing the
-pointer arithmetic in acm_softint() and set the ACM_ERROR_DELAY when the
-cooldown mechanism appear to be needed.
-
-Fixes: a4e7279cd1d1 ("cdc-acm: introduce a cool down")
-Cc: Oliver Neukum <oneukum@suse.com>
-Reported-by: Pascal Vizeli <pascal.vizeli@nabucasa.com>
-Acked-by: Oliver Neukum <oneukum@suse.com>
-Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
-Link: https://lore.kernel.org/r/20201019170702.150534-1-jbrunet@baylibre.com
-Cc: stable <stable@vger.kernel.org>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/usb/class/cdc-acm.c | 12 +++++-------
- drivers/usb/class/cdc-acm.h |  3 +--
- 2 files changed, 6 insertions(+), 9 deletions(-)
-
-diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
-index e8b9b27937ed..4b543aa0030d 100644
---- a/drivers/usb/class/cdc-acm.c
-+++ b/drivers/usb/class/cdc-acm.c
-@@ -510,6 +510,7 @@ static void acm_read_bulk_callback(struct urb *urb)
- 			"%s - cooling babbling device\n", __func__);
- 		usb_mark_last_busy(acm->dev);
- 		set_bit(rb->index, &acm->urbs_in_error_delay);
-+		set_bit(ACM_ERROR_DELAY, &acm->flags);
- 		cooldown = true;
- 		break;
- 	default:
-@@ -535,7 +536,7 @@ static void acm_read_bulk_callback(struct urb *urb)
- 
- 	if (stopped || stalled || cooldown) {
- 		if (stalled)
--			schedule_work(&acm->work);
-+			schedule_delayed_work(&acm->dwork, 0);
- 		else if (cooldown)
- 			schedule_delayed_work(&acm->dwork, HZ / 2);
- 		return;
-@@ -570,13 +571,13 @@ static void acm_write_bulk(struct urb *urb)
- 	acm_write_done(acm, wb);
- 	spin_unlock_irqrestore(&acm->write_lock, flags);
- 	set_bit(EVENT_TTY_WAKEUP, &acm->flags);
--	schedule_work(&acm->work);
-+	schedule_delayed_work(&acm->dwork, 0);
- }
- 
- static void acm_softint(struct work_struct *work)
- {
- 	int i;
--	struct acm *acm = container_of(work, struct acm, work);
-+	struct acm *acm = container_of(work, struct acm, dwork.work);
- 
- 	if (test_bit(EVENT_RX_STALL, &acm->flags)) {
- 		smp_mb(); /* against acm_suspend() */
-@@ -592,7 +593,7 @@ static void acm_softint(struct work_struct *work)
- 	if (test_and_clear_bit(ACM_ERROR_DELAY, &acm->flags)) {
- 		for (i = 0; i < acm->rx_buflimit; i++)
- 			if (test_and_clear_bit(i, &acm->urbs_in_error_delay))
--					acm_submit_read_urb(acm, i, GFP_NOIO);
-+				acm_submit_read_urb(acm, i, GFP_KERNEL);
- 	}
- 
- 	if (test_and_clear_bit(EVENT_TTY_WAKEUP, &acm->flags))
-@@ -1386,7 +1387,6 @@ static int acm_probe(struct usb_interface *intf,
- 	acm->ctrlsize = ctrlsize;
- 	acm->readsize = readsize;
- 	acm->rx_buflimit = num_rx_buf;
--	INIT_WORK(&acm->work, acm_softint);
- 	INIT_DELAYED_WORK(&acm->dwork, acm_softint);
- 	init_waitqueue_head(&acm->wioctl);
- 	spin_lock_init(&acm->write_lock);
-@@ -1596,7 +1596,6 @@ static void acm_disconnect(struct usb_interface *intf)
- 	}
- 
- 	acm_kill_urbs(acm);
--	cancel_work_sync(&acm->work);
- 	cancel_delayed_work_sync(&acm->dwork);
- 
- 	tty_unregister_device(acm_tty_driver, acm->minor);
-@@ -1639,7 +1638,6 @@ static int acm_suspend(struct usb_interface *intf, pm_message_t message)
- 		return 0;
- 
- 	acm_kill_urbs(acm);
--	cancel_work_sync(&acm->work);
- 	cancel_delayed_work_sync(&acm->dwork);
- 	acm->urbs_in_error_delay = 0;
- 
-diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h
-index 30380d28a504..d8f8651425c4 100644
---- a/drivers/usb/class/cdc-acm.h
-+++ b/drivers/usb/class/cdc-acm.h
-@@ -111,8 +111,7 @@ struct acm {
- #		define ACM_ERROR_DELAY	3
- 	unsigned long urbs_in_error_delay;		/* these need to be restarted after a delay */
- 	struct usb_cdc_line_coding line;		/* bits, stop, parity */
--	struct work_struct work;			/* work queue entry for various purposes*/
--	struct delayed_work dwork;			/* for cool downs needed in error recovery */
-+	struct delayed_work dwork;		        /* work queue entry for various purposes */
- 	unsigned int ctrlin;				/* input control lines (DCD, DSR, RI, break, overruns) */
- 	unsigned int ctrlout;				/* output control lines (DTR, RTS) */
- 	struct async_icount iocount;			/* counters for control line changes */
--- 
-2.29.1
-

buildroot-external/board/raspberrypi/patches/linux/0004-dt-bindings-reset-Add-a-binding-for-the-RPi-Firmware.patch

@@ -0,0 +1,83 @@
+From 33743cfcff296b1011e46168ecab185a00e0f00d Mon Sep 17 00:00:00 2001
+Message-Id: <33743cfcff296b1011e46168ecab185a00e0f00d.1605346684.git.stefan@agner.ch>
+In-Reply-To: <3651b4af52d63d4e37f40c7a6d0809b0a6c9dd73.1605346684.git.stefan@agner.ch>
+References: <3651b4af52d63d4e37f40c7a6d0809b0a6c9dd73.1605346684.git.stefan@agner.ch>
+From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
+Date: Mon, 29 Jun 2020 18:18:37 +0200
+Subject: [PATCH 4/8] dt-bindings: reset: Add a binding for the RPi Firmware
+ reset controller
+
+The firmware running on the RPi VideoCore can be used to reset and
+initialize HW controlled by the firmware.
+
+Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
+Link: https://lore.kernel.org/r/20200629161845.6021-2-nsaenzjulienne@suse.de
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+(cherry picked from commit 242841992ae6f22bd761add2f380b2ef3271ba9a)
+---
+ .../arm/bcm/raspberrypi,bcm2835-firmware.yaml | 21 +++++++++++++++++++
+ .../reset/raspberrypi,firmware-reset.h        | 13 ++++++++++++
+ 2 files changed, 34 insertions(+)
+ create mode 100644 include/dt-bindings/reset/raspberrypi,firmware-reset.h
+
+diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
+index 17e4f20c8d39..c78499a41c72 100644
+--- a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
++++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
+@@ -48,6 +48,22 @@ properties:
+       - compatible
+       - "#clock-cells"
+ 
++  reset:
++    type: object
++
++    properties:
++      compatible:
++        const: raspberrypi,firmware-reset
++
++      "#reset-cells":
++        const: 1
++        description: >
++          The argument is the ID of the firmware reset line to affect.
++
++    required:
++      - compatible
++      - "#reset-cells"
++
+     additionalProperties: false
+ 
+ required:
+@@ -64,5 +80,10 @@ examples:
+             compatible = "raspberrypi,firmware-clocks";
+             #clock-cells = <1>;
+         };
++
++        reset: reset {
++            compatible = "raspberrypi,firmware-reset";
++            #reset-cells = <1>;
++        };
+     };
+ ...
+diff --git a/include/dt-bindings/reset/raspberrypi,firmware-reset.h b/include/dt-bindings/reset/raspberrypi,firmware-reset.h
+new file mode 100644
+index 000000000000..1a4f4c792723
+--- /dev/null
++++ b/include/dt-bindings/reset/raspberrypi,firmware-reset.h
+@@ -0,0 +1,13 @@
++/* SPDX-License-Identifier: GPL-2.0 */
++/*
++ * Copyright (c) 2020 Nicolas Saenz Julienne
++ * Author: Nicolas Saenz Julienne <nsaenzjulienne@suse.com>
++ */
++
++#ifndef _DT_BINDINGS_RASPBERRYPI_FIRMWARE_RESET_H
++#define _DT_BINDINGS_RASPBERRYPI_FIRMWARE_RESET_H
++
++#define RASPBERRYPI_FIRMWARE_RESET_ID_USB	0
++#define RASPBERRYPI_FIRMWARE_RESET_NUM_IDS	1
++
++#endif
+-- 
+2.29.2
+

buildroot-external/board/raspberrypi/patches/linux/0005-ARM-dts-bcm2711-Add-firmware-usb-reset-node.patch

@@ -0,0 +1,39 @@
+From fecb02cc3664de0d1c43ce566ff95c1b68fca51e Mon Sep 17 00:00:00 2001
+Message-Id: <fecb02cc3664de0d1c43ce566ff95c1b68fca51e.1605346684.git.stefan@agner.ch>
+In-Reply-To: <3651b4af52d63d4e37f40c7a6d0809b0a6c9dd73.1605346684.git.stefan@agner.ch>
+References: <3651b4af52d63d4e37f40c7a6d0809b0a6c9dd73.1605346684.git.stefan@agner.ch>
+From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
+Date: Mon, 29 Jun 2020 18:18:39 +0200
+Subject: [PATCH 5/8] ARM: dts: bcm2711: Add firmware usb reset node
+
+Now that the reset driver exposing Raspberry Pi 4's firmware based USB
+reset routine is available, let's add the device tree node exposing it.
+
+Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
+Link: https://lore.kernel.org/r/20200629161845.6021-4-nsaenzjulienne@suse.de
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+(cherry picked from commit b03300db06bed1997a1eecc4c26f3a2895c57726)
+---
+ arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 5 +++++
+ 1 file changed, 5 insertions(+)
+
+diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
+index 21b20e334b1a..d77d61d41bbc 100644
+--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
++++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
+@@ -72,6 +72,11 @@
+ 				  "SD_OC_N";
+ 		status = "okay";
+ 	};
++
++	reset: reset {
++		compatible = "raspberrypi,firmware-reset";
++		#reset-cells = <1>;
++	};
+ };
+ 
+ &gpio {
+-- 
+2.29.2
+

buildroot-external/board/raspberrypi/patches/linux/0006-ARM-dts-bcm2711-Add-reset-controller-to-xHCI-node.patch

@@ -0,0 +1,60 @@
+From e0231cd65d8c13be1cebae1e6b5fbef61be6be0d Mon Sep 17 00:00:00 2001
+Message-Id: <e0231cd65d8c13be1cebae1e6b5fbef61be6be0d.1605346684.git.stefan@agner.ch>
+In-Reply-To: <3651b4af52d63d4e37f40c7a6d0809b0a6c9dd73.1605346684.git.stefan@agner.ch>
+References: <3651b4af52d63d4e37f40c7a6d0809b0a6c9dd73.1605346684.git.stefan@agner.ch>
+From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
+Date: Mon, 29 Jun 2020 18:18:40 +0200
+Subject: [PATCH 6/8] ARM: dts: bcm2711: Add reset controller to xHCI node
+
+The chip is hardwired to the board's PCIe bus and needs to be properly
+setup trough a firmware routine after a PCI fundamental reset. Pass the
+reset controller phandle that takes care of triggering the
+initialization to the relevant PCI device.
+
+Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
+Link: https://lore.kernel.org/r/20200629161845.6021-5-nsaenzjulienne@suse.de
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+(cherry picked from commit 258f92d2f840b6ea62c0b33f04eb4d9270935bba)
+---
+ arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 17 +++++++++++++++++
+ 1 file changed, 17 insertions(+)
+
+diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
+index d77d61d41bbc..513cae21e64c 100644
+--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
++++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
+@@ -3,6 +3,8 @@
+ #include "bcm2711.dtsi"
+ #include "bcm2835-rpi.dtsi"
+ 
++#include <dt-bindings/reset/raspberrypi,firmware-reset.h>
++
+ / {
+ 	compatible = "raspberrypi,4-model-b", "brcm,bcm2711";
+ 	model = "Raspberry Pi 4 Model B";
+@@ -195,6 +197,21 @@
+ 	};
+ };
+ 
++&pcie0 {
++	pci@1,0 {
++		#address-cells = <3>;
++		#size-cells = <2>;
++		ranges;
++
++		reg = <0 0 0 0 0>;
++
++		usb@1,0 {
++			reg = <0x10000 0 0 0 0>;
++			resets = <&reset RASPBERRYPI_FIRMWARE_RESET_ID_USB>;
++		};
++	};
++};
++
+ /* uart0 communicates with the BT module */
+ &uart0 {
+ 	pinctrl-names = "default";
+-- 
+2.29.2
+

buildroot-external/board/raspberrypi/patches/linux/0007-arch-pgtable-define-MAX_POSSIBLE_PHYSMEM_BITS-where-.patch

@@ -0,0 +1,233 @@
+From 5038cc5a33a1534bd0e521674314938224838ce4 Mon Sep 17 00:00:00 2001
+Message-Id: <5038cc5a33a1534bd0e521674314938224838ce4.1605346684.git.stefan@agner.ch>
+In-Reply-To: <3651b4af52d63d4e37f40c7a6d0809b0a6c9dd73.1605346684.git.stefan@agner.ch>
+References: <3651b4af52d63d4e37f40c7a6d0809b0a6c9dd73.1605346684.git.stefan@agner.ch>
+From: Arnd Bergmann <arnd@arndb.de>
+Date: Fri, 13 Nov 2020 15:59:32 +0100
+Subject: [PATCH 7/8] arch: pgtable: define MAX_POSSIBLE_PHYSMEM_BITS where
+ needed
+
+Stefan Agner reported a bug when using zsram on 32-bit Arm machines
+with RAM above the 4GB address boundary:
+
+  Unable to handle kernel NULL pointer dereference at virtual address 00000000
+  pgd = a27bd01c
+  [00000000] *pgd=236a0003, *pmd=1ffa64003
+  Internal error: Oops: 207 [#1] SMP ARM
+  Modules linked in: mdio_bcm_unimac(+) brcmfmac cfg80211 brcmutil raspberrypi_hwmon hci_uart crc32_arm_ce bcm2711_thermal phy_generic genet
+  CPU: 0 PID: 123 Comm: mkfs.ext4 Not tainted 5.9.6 #1
+  Hardware name: BCM2711
+  PC is at zs_map_object+0x94/0x338
+  LR is at zram_bvec_rw.constprop.0+0x330/0xa64
+  pc : [<c0602b38>]    lr : [<c0bda6a0>]    psr: 60000013
+  sp : e376bbe0  ip : 00000000  fp : c1e2921c
+  r10: 00000002  r9 : c1dda730  r8 : 00000000
+  r7 : e8ff7a00  r6 : 00000000  r5 : 02f9ffa0  r4 : e3710000
+  r3 : 000fdffe  r2 : c1e0ce80  r1 : ebf979a0  r0 : 00000000
+  Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
+  Control: 30c5383d  Table: 235c2a80  DAC: fffffffd
+  Process mkfs.ext4 (pid: 123, stack limit = 0x495a22e6)
+  Stack: (0xe376bbe0 to 0xe376c000)
+
+As it turns out, zsram needs to know the maximum memory size, which
+is defined in MAX_PHYSMEM_BITS when CONFIG_SPARSEMEM is set, or in
+MAX_POSSIBLE_PHYSMEM_BITS on the x86 architecture.
+
+The same problem will be hit on all 32-bit architectures that have a
+physical address space larger than 4GB and happen to not enable sparsemem
+and include asm/sparsemem.h from asm/pgtable.h.
+
+After the initial discussion, I suggested just always defining
+MAX_POSSIBLE_PHYSMEM_BITS whenever CONFIG_PHYS_ADDR_T_64BIT is
+set, or provoking a build error otherwise. This addresses all
+configurations that can currently have this runtime bug, but
+leaves all other configurations unchanged.
+
+I looked up the possible number of bits in source code and
+datasheets, here is what I found:
+
+ - on ARC, CONFIG_ARC_HAS_PAE40 controls whether 32 or 40 bits are used
+ - on ARM, CONFIG_LPAE enables 40 bit addressing, without it we never
+   support more than 32 bits, even though supersections in theory allow
+   up to 40 bits as well.
+ - on MIPS, some MIPS32r1 or later chips support 36 bits, and MIPS32r5
+   XPA supports up to 60 bits in theory, but 40 bits are more than
+   anyone will ever ship
+ - On PowerPC, there are three different implementations of 36 bit
+   addressing, but 32-bit is used without CONFIG_PTE_64BIT
+ - On RISC-V, the normal page table format can support 34 bit
+   addressing. There is no highmem support on RISC-V, so anything
+   above 2GB is unused, but it might be useful to eventually support
+   CONFIG_ZRAM for high pages.
+
+Fixes: 61989a80fb3a ("staging: zsmalloc: zsmalloc memory allocation library")
+Fixes: 02390b87a945 ("mm/zsmalloc: Prepare to variable MAX_PHYSMEM_BITS")
+Cc: Stefan Agner <stefan@agner.ch>
+Cc: Mike Rapoport <rppt@kernel.org>
+Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
+Cc: Nitin Gupta <ngupta@vflare.org>
+Cc: Minchan Kim <minchan@kernel.org>
+Cc: Vineet Gupta <vgupta@synopsys.com>
+Cc: linux-snps-arc@lists.infradead.org
+Cc: Russell King <linux@armlinux.org.uk>
+Cc: linux-arm-kernel@lists.infradead.org
+Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
+Cc: linux-mips@vger.kernel.org
+Cc: Michael Ellerman <mpe@ellerman.id.au>
+Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
+Cc: Paul Mackerras <paulus@samba.org>
+Cc: linuxppc-dev@lists.ozlabs.org
+Cc: Paul Walmsley <paul.walmsley@sifive.com>
+Cc: Palmer Dabbelt <palmer@dabbelt.com>
+Cc: Albert Ou <aou@eecs.berkeley.edu>
+Cc: linux-riscv@lists.infradead.org
+Link: https://lore.kernel.org/linux-mm/bdfa44bf1c570b05d6c70898e2bbb0acf234ecdf.1604762181.git.stefan@agner.ch/
+Signed-off-by: Arnd Bergmann <arnd@arndb.de>
+---
+ arch/arc/include/asm/pgtable.h               |  2 ++
+ arch/arm/include/asm/pgtable-2level.h        |  2 ++
+ arch/arm/include/asm/pgtable-3level.h        |  2 ++
+ arch/mips/include/asm/pgtable-32.h           |  3 +++
+ arch/powerpc/include/asm/book3s/32/pgtable.h |  2 ++
+ arch/powerpc/include/asm/nohash/32/pgtable.h |  2 ++
+ arch/riscv/include/asm/pgtable-32.h          |  2 ++
+ include/asm-generic/pgtable.h                | 13 +++++++++++++
+ 8 files changed, 28 insertions(+)
+
+diff --git a/arch/arc/include/asm/pgtable.h b/arch/arc/include/asm/pgtable.h
+index 7addd0301c51..6bdcf9b495b8 100644
+--- a/arch/arc/include/asm/pgtable.h
++++ b/arch/arc/include/asm/pgtable.h
+@@ -135,8 +135,10 @@
+ 
+ #ifdef CONFIG_ARC_HAS_PAE40
+ #define PTE_BITS_NON_RWX_IN_PD1	(0xff00000000 | PAGE_MASK | _PAGE_CACHEABLE)
++#define MAX_POSSIBLE_PHYSMEM_BITS 40
+ #else
+ #define PTE_BITS_NON_RWX_IN_PD1	(PAGE_MASK | _PAGE_CACHEABLE)
++#define MAX_POSSIBLE_PHYSMEM_BITS 32
+ #endif
+ 
+ /**************************************************************************
+diff --git a/arch/arm/include/asm/pgtable-2level.h b/arch/arm/include/asm/pgtable-2level.h
+index 51beec41d48c..50b51ac91fcb 100644
+--- a/arch/arm/include/asm/pgtable-2level.h
++++ b/arch/arm/include/asm/pgtable-2level.h
+@@ -75,6 +75,8 @@
+ #define PTE_HWTABLE_OFF		(PTE_HWTABLE_PTRS * sizeof(pte_t))
+ #define PTE_HWTABLE_SIZE	(PTRS_PER_PTE * sizeof(u32))
+ 
++#define MAX_POSSIBLE_PHYSMEM_BITS	32
++
+ /*
+  * PMD_SHIFT determines the size of the area a second-level page table can map
+  * PGDIR_SHIFT determines what a third-level page table entry can map
+diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h
+index 5b18295021a0..8006a56cc2ce 100644
+--- a/arch/arm/include/asm/pgtable-3level.h
++++ b/arch/arm/include/asm/pgtable-3level.h
+@@ -25,6 +25,8 @@
+ #define PTE_HWTABLE_OFF		(0)
+ #define PTE_HWTABLE_SIZE	(PTRS_PER_PTE * sizeof(u64))
+ 
++#define MAX_POSSIBLE_PHYSMEM_BITS 40
++
+ /*
+  * PGDIR_SHIFT determines the size a top-level page table entry can map.
+  */
+diff --git a/arch/mips/include/asm/pgtable-32.h b/arch/mips/include/asm/pgtable-32.h
+index ba967148b016..2604fab8a92d 100644
+--- a/arch/mips/include/asm/pgtable-32.h
++++ b/arch/mips/include/asm/pgtable-32.h
+@@ -155,6 +155,7 @@ static inline void pmd_clear(pmd_t *pmdp)
+ 
+ #if defined(CONFIG_XPA)
+ 
++#define MAX_POSSIBLE_PHYSMEM_BITS 40
+ #define pte_pfn(x)		(((unsigned long)((x).pte_high >> _PFN_SHIFT)) | (unsigned long)((x).pte_low << _PAGE_PRESENT_SHIFT))
+ static inline pte_t
+ pfn_pte(unsigned long pfn, pgprot_t prot)
+@@ -170,6 +171,7 @@ pfn_pte(unsigned long pfn, pgprot_t prot)
+ 
+ #elif defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_CPU_MIPS32)
+ 
++#define MAX_POSSIBLE_PHYSMEM_BITS 36
+ #define pte_pfn(x)		((unsigned long)((x).pte_high >> 6))
+ 
+ static inline pte_t pfn_pte(unsigned long pfn, pgprot_t prot)
+@@ -184,6 +186,7 @@ static inline pte_t pfn_pte(unsigned long pfn, pgprot_t prot)
+ 
+ #else
+ 
++#define MAX_POSSIBLE_PHYSMEM_BITS 32
+ #ifdef CONFIG_CPU_VR41XX
+ #define pte_pfn(x)		((unsigned long)((x).pte >> (PAGE_SHIFT + 2)))
+ #define pfn_pte(pfn, prot)	__pte(((pfn) << (PAGE_SHIFT + 2)) | pgprot_val(prot))
+diff --git a/arch/powerpc/include/asm/book3s/32/pgtable.h b/arch/powerpc/include/asm/book3s/32/pgtable.h
+index 0796533d37dd..7b6349be621a 100644
+--- a/arch/powerpc/include/asm/book3s/32/pgtable.h
++++ b/arch/powerpc/include/asm/book3s/32/pgtable.h
+@@ -37,8 +37,10 @@ static inline bool pte_user(pte_t pte)
+  */
+ #ifdef CONFIG_PTE_64BIT
+ #define PTE_RPN_MASK	(~((1ULL << PTE_RPN_SHIFT) - 1))
++#define MAX_POSSIBLE_PHYSMEM_BITS 36
+ #else
+ #define PTE_RPN_MASK	(~((1UL << PTE_RPN_SHIFT) - 1))
++#define MAX_POSSIBLE_PHYSMEM_BITS 32
+ #endif
+ 
+ /*
+diff --git a/arch/powerpc/include/asm/nohash/32/pgtable.h b/arch/powerpc/include/asm/nohash/32/pgtable.h
+index 552b96eef0c8..3d32d7103ec8 100644
+--- a/arch/powerpc/include/asm/nohash/32/pgtable.h
++++ b/arch/powerpc/include/asm/nohash/32/pgtable.h
+@@ -148,8 +148,10 @@ int map_kernel_page(unsigned long va, phys_addr_t pa, pgprot_t prot);
+  */
+ #if defined(CONFIG_PPC32) && defined(CONFIG_PTE_64BIT)
+ #define PTE_RPN_MASK	(~((1ULL << PTE_RPN_SHIFT) - 1))
++#define MAX_POSSIBLE_PHYSMEM_BITS 36
+ #else
+ #define PTE_RPN_MASK	(~((1UL << PTE_RPN_SHIFT) - 1))
++#define MAX_POSSIBLE_PHYSMEM_BITS 32
+ #endif
+ 
+ /*
+diff --git a/arch/riscv/include/asm/pgtable-32.h b/arch/riscv/include/asm/pgtable-32.h
+index b0ab66e5fdb1..5b2e79e5bfa5 100644
+--- a/arch/riscv/include/asm/pgtable-32.h
++++ b/arch/riscv/include/asm/pgtable-32.h
+@@ -14,4 +14,6 @@
+ #define PGDIR_SIZE      (_AC(1, UL) << PGDIR_SHIFT)
+ #define PGDIR_MASK      (~(PGDIR_SIZE - 1))
+ 
++#define MAX_POSSIBLE_PHYSMEM_BITS 34
++
+ #endif /* _ASM_RISCV_PGTABLE_32_H */
+diff --git a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h
+index 6fd08cf04add..7a8c43dee873 100644
+--- a/include/asm-generic/pgtable.h
++++ b/include/asm-generic/pgtable.h
+@@ -1163,6 +1163,19 @@ static inline bool arch_has_pfn_modify_check(void)
+ #define io_remap_pfn_range remap_pfn_range
+ #endif
+ 
++#if !defined(MAX_POSSIBLE_PHYSMEM_BITS) && !defined(CONFIG_64BIT)
++#ifdef CONFIG_PHYS_ADDR_T_64BIT
++/*
++ * ZSMALLOC needs to know the highest PFN on 32-bit architectures
++ * with physical address space extension, but falls back to
++ * BITS_PER_LONG otherwise.
++ */
++#error Missing MAX_POSSIBLE_PHYSMEM_BITS definition
++#else
++#define MAX_POSSIBLE_PHYSMEM_BITS 32
++#endif
++#endif
++
+ #ifndef has_transparent_hugepage
+ #ifdef CONFIG_TRANSPARENT_HUGEPAGE
+ #define has_transparent_hugepage() 1
+-- 
+2.29.2
+

buildroot-external/board/raspberrypi/patches/linux/0008-ARM-dts-bcm283x-add-compatible-picked-up-by-U-Boot.patch

@@ -0,0 +1,76 @@
+From c18ca341da823bd2ec5aa04ea5970d3867eaae73 Mon Sep 17 00:00:00 2001
+Message-Id: <c18ca341da823bd2ec5aa04ea5970d3867eaae73.1605346684.git.stefan@agner.ch>
+In-Reply-To: <3651b4af52d63d4e37f40c7a6d0809b0a6c9dd73.1605346684.git.stefan@agner.ch>
+References: <3651b4af52d63d4e37f40c7a6d0809b0a6c9dd73.1605346684.git.stefan@agner.ch>
+From: Pascal Vizeli <pvizeli@syshack.ch>
+Date: Tue, 2 Jun 2020 21:20:08 +0000
+Subject: [PATCH 8/8] ARM: dts: bcm283x: add compatible picked up by U-Boot
+
+Without brcm,bcm2835-pl011 in compatible U-Boot uses the regular PL011
+driver which seems to crash when enable_uart=1 is not used. Using
+brcm,bcm2835-pl011 works around that and does not affect Linux since its
+not using that compatible string.
+
+Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch>
+Signed-off-by: Stefan Agner <stefan@agner.ch>
+---
+ arch/arm/boot/dts/bcm2711.dtsi | 8 ++++----
+ arch/arm/boot/dts/bcm283x.dtsi | 2 +-
+ 2 files changed, 5 insertions(+), 5 deletions(-)
+
+diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
+index 4f87bb4fd3d1..12f0d90e8957 100644
+--- a/arch/arm/boot/dts/bcm2711.dtsi
++++ b/arch/arm/boot/dts/bcm2711.dtsi
+@@ -110,7 +110,7 @@
+ 		};
+ 
+ 		uart2: serial@7e201400 {
+-			compatible = "arm,pl011", "arm,primecell";
++			compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
+ 			reg = <0x7e201400 0x200>;
+ 			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+ 			clocks = <&clocks BCM2835_CLOCK_UART>,
+@@ -121,7 +121,7 @@
+ 		};
+ 
+ 		uart3: serial@7e201600 {
+-			compatible = "arm,pl011", "arm,primecell";
++			compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
+ 			reg = <0x7e201600 0x200>;
+ 			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+ 			clocks = <&clocks BCM2835_CLOCK_UART>,
+@@ -132,7 +132,7 @@
+ 		};
+ 
+ 		uart4: serial@7e201800 {
+-			compatible = "arm,pl011", "arm,primecell";
++			compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
+ 			reg = <0x7e201800 0x200>;
+ 			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+ 			clocks = <&clocks BCM2835_CLOCK_UART>,
+@@ -143,7 +143,7 @@
+ 		};
+ 
+ 		uart5: serial@7e201a00 {
+-			compatible = "arm,pl011", "arm,primecell";
++			compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
+ 			reg = <0x7e201a00 0x200>;
+ 			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+ 			clocks = <&clocks BCM2835_CLOCK_UART>,
+diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
+index 4426f9e6ba92..abcf677fe416 100644
+--- a/arch/arm/boot/dts/bcm283x.dtsi
++++ b/arch/arm/boot/dts/bcm283x.dtsi
+@@ -306,7 +306,7 @@
+ 		};
+ 
+ 		uart0: serial@7e201000 {
+-			compatible = "arm,pl011", "arm,primecell";
++			compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
+ 			reg = <0x7e201000 0x200>;
+ 			interrupts = <2 25>;
+ 			clocks = <&clocks BCM2835_CLOCK_UART>,
+-- 
+2.29.2
+

buildroot-external/board/raspberrypi/patches/uboot/0001-rpi-Use-CONFIG_OF_BOARD-instead-of-CONFIG_EMBED.patch

@@ -1,7 +1,8 @@
-From 0f45c3f2f46b62f767ef225b258f927ad88ca360 Mon Sep 17 00:00:00 2001
+From a04331a6ba7334282836bbaa76e979c4e6be3900 Mon Sep 17 00:00:00 2001
+Message-Id: <a04331a6ba7334282836bbaa76e979c4e6be3900.1606428503.git.stefan@agner.ch>
 From: Pascal Vizeli <pvizeli@syshack.ch>
 Date: Tue, 10 Dec 2019 09:48:46 +0000
-Subject: [PATCH 1/1] rpi: Use CONFIG_OF_BOARD instead of CONFIG_EMBED
+Subject: [PATCH 01/15] rpi: Use CONFIG_OF_BOARD instead of CONFIG_EMBED
 
 Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch>
 ---
@@ -13,7 +14,7 @@ Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch>
  5 files changed, 5 insertions(+), 5 deletions(-)
 
 diff --git a/configs/rpi_0_w_defconfig b/configs/rpi_0_w_defconfig
-index fe5a7763a6..ed7f9381e9 100644
+index bba5e12b12..0241f4c6d3 100644
 --- a/configs/rpi_0_w_defconfig
 +++ b/configs/rpi_0_w_defconfig
 @@ -17,7 +17,7 @@ CONFIG_CMD_GPIO=y
@@ -22,11 +23,11 @@ index fe5a7763a6..ed7f9381e9 100644
  CONFIG_CMD_FS_UUID=y
 -CONFIG_OF_EMBED=y
 +CONFIG_OF_BOARD=y
- CONFIG_DEFAULT_DEVICE_TREE="bcm2835-rpi-zero-w"
- CONFIG_ENV_FAT_INTERFACE="mmc"
  CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
+ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 diff --git a/configs/rpi_2_defconfig b/configs/rpi_2_defconfig
-index bf331c0ad0..52e3c3b234 100644
+index 1c2bbb29ce..9573e475f4 100644
 --- a/configs/rpi_2_defconfig
 +++ b/configs/rpi_2_defconfig
 @@ -17,7 +17,7 @@ CONFIG_CMD_GPIO=y
@@ -35,11 +36,11 @@ index bf331c0ad0..52e3c3b234 100644
  CONFIG_CMD_FS_UUID=y
 -CONFIG_OF_EMBED=y
 +CONFIG_OF_BOARD=y
- CONFIG_DEFAULT_DEVICE_TREE="bcm2836-rpi-2-b"
- CONFIG_ENV_FAT_INTERFACE="mmc"
  CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
+ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 diff --git a/configs/rpi_3_32b_defconfig b/configs/rpi_3_32b_defconfig
-index c2417a0ec9..191962f0f7 100644
+index b8a3d17f43..252df994e6 100644
 --- a/configs/rpi_3_32b_defconfig
 +++ b/configs/rpi_3_32b_defconfig
 @@ -18,7 +18,7 @@ CONFIG_CMD_GPIO=y
@@ -48,11 +49,11 @@ index c2417a0ec9..191962f0f7 100644
  CONFIG_CMD_FS_UUID=y
 -CONFIG_OF_EMBED=y
 +CONFIG_OF_BOARD=y
- CONFIG_DEFAULT_DEVICE_TREE="bcm2837-rpi-3-b"
- CONFIG_ENV_FAT_INTERFACE="mmc"
  CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
+ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 diff --git a/configs/rpi_3_defconfig b/configs/rpi_3_defconfig
-index 4fa682539c..03a2356d3d 100644
+index 9b281a4f15..1e9ee6122e 100644
 --- a/configs/rpi_3_defconfig
 +++ b/configs/rpi_3_defconfig
 @@ -18,7 +18,7 @@ CONFIG_CMD_GPIO=y
@@ -61,11 +62,11 @@ index 4fa682539c..03a2356d3d 100644
  CONFIG_CMD_FS_UUID=y
 -CONFIG_OF_EMBED=y
 +CONFIG_OF_BOARD=y
- CONFIG_DEFAULT_DEVICE_TREE="bcm2837-rpi-3-b"
- CONFIG_ENV_FAT_INTERFACE="mmc"
  CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
+ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 diff --git a/configs/rpi_defconfig b/configs/rpi_defconfig
-index 2c04b3334e..bf00d8b669 100644
+index b5ad53c37b..223fc03275 100644
 --- a/configs/rpi_defconfig
 +++ b/configs/rpi_defconfig
 @@ -17,7 +17,7 @@ CONFIG_CMD_GPIO=y
@@ -74,8 +75,9 @@ index 2c04b3334e..bf00d8b669 100644
  CONFIG_CMD_FS_UUID=y
 -CONFIG_OF_EMBED=y
 +CONFIG_OF_BOARD=y
- CONFIG_DEFAULT_DEVICE_TREE="bcm2835-rpi-b"
- CONFIG_ENV_FAT_INTERFACE="mmc"
  CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
+ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 -- 
-2.17.1
+2.29.2
+

buildroot-external/board/raspberrypi/patches/uboot/0002-raspberrypi-Disable-simple-framebuffer-support.patch

@@ -1,7 +1,10 @@
-From 68e65b1e3859d4baf41d1e5f6525ff7ace778ba1 Mon Sep 17 00:00:00 2001
+From cc40a554b003df9b07f8a55f69a94d7393d81cbc Mon Sep 17 00:00:00 2001
+Message-Id: <cc40a554b003df9b07f8a55f69a94d7393d81cbc.1606428503.git.stefan@agner.ch>
+In-Reply-To: <a04331a6ba7334282836bbaa76e979c4e6be3900.1606428503.git.stefan@agner.ch>
+References: <a04331a6ba7334282836bbaa76e979c4e6be3900.1606428503.git.stefan@agner.ch>
 From: Florin Sarbu <florin@balena.io>
 Date: Thu, 12 Sep 2019 12:31:31 +0200
-Subject: [PATCH] raspberrypi: Disable simple framebuffer support
+Subject: [PATCH 02/15] raspberrypi: Disable simple framebuffer support
 
 On 4.19 kernels this u-boot driver clashes with bcm2708_fb.
 So let's disable it from here so that we have bcm2708_fb
@@ -17,10 +20,10 @@ Signed-off-by: Florin Sarbu <florin@balena.io>
  3 files changed, 4 insertions(+), 4 deletions(-)
 
 diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c
-index 153a1fd..c7bd399 100644
+index 6b1fa5fc14..5cfee7c00a 100644
 --- a/board/raspberrypi/rpi/rpi.c
 +++ b/board/raspberrypi/rpi/rpi.c
-@@ -482,7 +482,7 @@ int ft_board_setup(void *blob, bd_t *bd)
+@@ -485,7 +485,7 @@ int ft_board_setup(void *blob, struct bd_info *bd)
  	 * should be more intelligent, and e.g. only do this if no enabled DT
  	 * node exists for the "real" graphics driver.
  	 */
@@ -30,7 +33,7 @@ index 153a1fd..c7bd399 100644
  #ifdef CONFIG_EFI_LOADER
  	/* Reserve the spin table */
 diff --git a/common/Makefile b/common/Makefile
-index 0de60b3..2848d98 100644
+index 2e7a090588..b3985cc04d 100644
 --- a/common/Makefile
 +++ b/common/Makefile
 @@ -50,7 +50,7 @@ ifndef CONFIG_DM_VIDEO
@@ -43,10 +46,10 @@ index 0de60b3..2848d98 100644
  obj-$(CONFIG_MENU) += menu.o
  obj-$(CONFIG_UPDATE_TFTP) += update.o
 diff --git a/include/configs/rpi.h b/include/configs/rpi.h
-index a38bf20..e2760b0 100644
+index 834f1cd236..19a0d611c4 100644
 --- a/include/configs/rpi.h
 +++ b/include/configs/rpi.h
-@@ -60,8 +60,8 @@
+@@ -65,8 +65,8 @@
  /* GPIO */
  #define CONFIG_BCM2835_GPIO
  /* LCD */
@@ -58,5 +61,5 @@ index a38bf20..e2760b0 100644
  #ifdef CONFIG_CMD_USB
  #define CONFIG_TFTP_TSIZE
 -- 
-2.7.4
+2.29.2