Bump version to 8.2

Some applications try to increase the buffers for performance reason. The
QUIC Go implementation for instance tries to request a 2048 kiB buffer
size.

The kernel default depends on skubuf size (which is architecture
dependent), but it is memory size independet and typically around 200 kiB
(see [1]).

Other network tuning guides suggest 16MiB for 1GB ethernet, as well as
changing the default as well as maximum bufffer size (see [2]). This
conservatively increases the maximum buffer size to 4MiB.

[1]: https://elixir.bootlin.com/linux/v5.15.45/source/include/net/sock.h#L2742
[2]: https://nateware.com/2013/04/06/linux-network-tuning-for-2013/

.dockerignore

@@ -1,3 +1,12 @@
-# Ignore everything except what we really need
-*
-!scripts/
+# We don't need this folder because we map the hole folder
+buildroot/
+buildroot-external/
+buildroot-patches/
+
+# Output/Release directory gets created using build scripts
+output*/
+release/
+
+# Ignore hidden directories as well
+.git/
+.github/

.github/ISSUE_TEMPLATE/bug_report.yml

@@ -25,11 +25,9 @@ body:
       label: What operating system image do you use?
       options:
         - generic-x86-64 (Generic UEFI capable x86-64 systems)
-        - generic-aarch64 (Generic UEFI capable aarch64 systems)
         - khadas-vim3 (Khadas VIM3)
         - odroid-c2 (Hardkernel ODROID-C2)
         - odroid-c4 (Hardkernel ODROID-C4)
-        - odroid-m1 (Hardkernel ODROID-M1)
         - odroid-n2 (Hardkernel ODROID-N2/N2+)
         - odroid-xu4 (Hardkernel ODROID-XU4)
         - ova (for Virtual Machines)
@@ -39,11 +37,10 @@ body:
         - rpi4  (Raspberry Pi 4/400 32-bit OS)
         - rpi4-64  (Raspberry Pi 4/400 64-bit OS)
         - tinker (ASUS Tinker Board/Tinker Board S)
-        - yellow (Home Assistant Yellow)
       description: >
-        Can be found in [Settings -> System -> Repairs -> System Information](https://my.home-assistant.io/redirect/system_health/). It is listed as the `Board` value.
+        Can be found in the [Configuration panel -> Settings -> Info](https://my.home-assistant.io/redirect/info/). It is listed as the `Board` value.
 
-        [![Open your Home Assistant instance and show health information about your system.](https://my.home-assistant.io/badges/system_health.svg)](https://my.home-assistant.io/redirect/system_health/)
+        [![Open your Home Assistant instance and show your Home Assistant version information.](https://my.home-assistant.io/badges/info.svg)](https://my.home-assistant.io/redirect/info/)
   - type: input
     validations:
       required: true
@@ -51,7 +48,7 @@ body:
       label: What version of Home Assistant Operating System is installed?
       placeholder: "6.6"
       description: >
-        Can be found in [Settings -> System -> Repairs -> System Information (top right menu)](https://my.home-assistant.io/redirect/system_health/). It is listed as the `Host Operating System` value.
+        Can be found in the [Configuration panel -> Settings -> Info](https://my.home-assistant.io/redirect/info/). It is listed as the `Host Operating System` value.
   - type: dropdown
     validations:
       required: true
@@ -79,8 +76,7 @@ body:
     attributes:
       label: Anything in the Supervisor logs that might be useful for us?
       description: >
-        Supervisor Logs can be found in [Settings -> System -> Logs](https://my.home-assistant.io/redirect/logs/)
-        then choose `Supervisor` in the top right.
+        Supervisor Logs can be found under [Configuration panel -> Add-ons, Backup & Supervisor -> System](https://my.home-assistant.io/redirect/supervisor_logs/), then choose Log Provider `Supervisor`.
 
         [![Open your Home Assistant instance and show your Supervisor system logs.](https://my.home-assistant.io/badges/supervisor_logs.svg)](https://my.home-assistant.io/redirect/supervisor_logs/)
       render: txt
@@ -90,19 +86,16 @@ body:
     attributes:
       label: Anything in the Host logs that might be useful for us?
       description: >
-        Host Logs can be found in [Settings -> System -> Logs](https://my.home-assistant.io/redirect/logs/)
-        then choose `Host` in the top right.
+        Supervisor Logs can be found under [Configuration panel -> Add-ons, Backup & Supervisor -> System](https://my.home-assistant.io/redirect/supervisor_logs/), then choose Log Provider `Host`.
       render: txt
   - type: textarea
     attributes:
-      label: System information
+      label: System Health information
       description: >
         **Optional** Copy the full System Health in this text area.
 
-        System information can be found in [Settings -> System -> Repairs -> System Information (top right menu)](https://my.home-assistant.io/redirect/system_health/),
-        Click the copy button at the bottom of the pop-up and paste it here.
-        
-        [![Open your Home Assistant instance and show health information about your system.](https://my.home-assistant.io/badges/system_health.svg)](https://my.home-assistant.io/redirect/system_health/)
+        Can be found in the [Configuration panel -> Settings -> Info](https://my.home-assistant.io/redirect/info/).
+        Use the copy icon on top right and choose `For GitHub`.
   - type: textarea
     attributes:
       label: Additional information

.github/ISSUE_TEMPLATE/config.yml

@@ -5,7 +5,7 @@ contact_links:
     about: Our documentation has its own issue tracker. Please report issues with the website there.
 
   - name: Report incorrect or missing information on our developer documentation
-    url: https://github.com/home-assistant/developers.home-assistant/issues
+    url: https://github.com/home-assistant/developers.home-assistant.io/issues
     about: Our developer documentation has its own issue tracker. Please report issues with the website there.
 
   - name: Request a feature for the Operating System

.github/dependabot.yml

@@ -1,6 +0,0 @@
-version: 2
-updates:
-- package-ecosystem: "github-actions"
-  directory: "/"
-  schedule:
-      interval: "weekly"

.github/label-actions.yml

@@ -30,14 +30,3 @@ supervisor-issue:
     repository, the issue might have been reported already. Open a new issue
     in that repository if you can't find a matching issue.
   close: true
-
-new-feature:
-  comment: >
-    :wave: @{issue-author}, thanks for your input!
-
-    We use this issue tracker to track issues of currently supported features.
-    Your request appears to request a new feature. We track potential new
-    features in the [Feature Request section of our Community Forum](https://community.home-assistant.io/c/feature-requests/13).
-    Please check if someone already requested a similar feature, or create
-    a new feature request with the "haos" tag in that forum. Thank you!
-  close: true

.github/release-drafter.yml

@@ -1,5 +1,4 @@
-name-template: Home Assistant OS $RESOLVED_VERSION
-tag-template: $RESOLVED_VERSION
+name-template: Home Assistant OS $NEXT_MINOR_VERSION
 version-template: "$MAJOR.$MINOR"
 categories:
   - title: 'Home Assistant Operating System'
@@ -27,8 +26,3 @@ template: |
   ## Changes
 
   $CHANGES
-version-resolver:
-  major:
-    labels:
-      - 'major'
-  default: minor

.github/workflows/dev.yml

@@ -12,9 +12,6 @@ jobs:
     if: ${{ github.event_name == 'workflow_dispatch' || contains(github.event.pull_request.labels.*.name, 'run-dev-build') }}
     name: Prepare build
     runs-on: [ "ubuntu-20.04" ]
-    permissions:
-      contents: read
-      pull-requests: read
     outputs:
       version_main: ${{ steps.version_main.outputs.version_main }}
       version_dev: ${{ steps.version_dev.outputs.version_dev }}${{ steps.version_pr.outputs.version_pr }}
@@ -26,7 +23,7 @@ jobs:
         run: |
           version_dev="dev$(date --utc +'%Y%m%d')"
           echo "Development version \"${version_dev}\""
-          echo "version_dev=${version_dev}" >> $GITHUB_OUTPUT
+          echo "::set-output name=version_dev::${version_dev}"
       - name: Generate Development build version for PR
         if: ${{ github.event.pull_request }}
         shell: bash
@@ -34,16 +31,16 @@ jobs:
         run: |
           version_pr=$(printf "%05d" ${{ github.event.pull_request.number }})
           echo "Development build for PR #${{ github.event.pull_request.number }}"
-          echo "version_pr=${version_pr}" >> $GITHUB_OUTPUT
-      - uses: actions/checkout@v3
+          echo "::set-output name=version_pr::${version_pr}"
+      - uses: actions/checkout@v2
       - name: Get Major/Minor version
         id: version_main
         run: |
           major=$(cat ${GITHUB_WORKSPACE}/buildroot-external/meta | grep VERSION_MAJOR | cut -d'=' -f2)
           build=$(cat ${GITHUB_WORKSPACE}/buildroot-external/meta | grep VERSION_BUILD | cut -d'=' -f2)
-          echo "version_main=${major}.${build}" >> $GITHUB_OUTPUT
+          echo "::set-output name=version_main::${major}.${build}"
       - name: Create build matrix
-        uses: actions/github-script@v6
+        uses: actions/github-script@v4
         id: generate_matrix
         with:
           script: |
@@ -72,7 +69,7 @@ jobs:
 
     steps:
       - name: Define git reference
-        uses: actions/github-script@v6
+        uses: actions/github-script@v4
         id: generate_gitref
         with:
           script: |
@@ -81,7 +78,7 @@ jobs:
             return { "ref": context.payload.pull_request.head.sha }
 
       - name: Checkout source
-        uses: actions/checkout@v3
+        uses: actions/checkout@v2
         with:
           submodules: true
           persist-credentials: false
@@ -109,7 +106,7 @@ jobs:
             haos-builder make BUILDDIR=/build VERSION_DEV=${{ needs.prepare.outputs.version_dev }} ${{ matrix.board.defconfig }}
 
       - name: Upload images
-        uses: burnett01/rsync-deployments@5.2
+        uses: burnett01/rsync-deployments@4.1
         with:
           rsh: -q
           switches: -aW

.github/workflows/label-actions.yml

@@ -14,4 +14,4 @@ jobs:
   action:
     runs-on: ubuntu-latest
     steps:
-      - uses: dessant/label-actions@v3.0.0
+      - uses: dessant/label-actions@v2

.github/workflows/matrix.json

@@ -35,12 +35,6 @@
     "runner": "aarch64-runner",
     "label": "board/odroid"
   },
-  {
-    "id": "odroid-m1",
-    "defconfig": "odroid_m1",
-    "runner": "aarch64-runner",
-    "label": "board/odroid"
-  },
   {
     "id": "odroid-n2",
     "defconfig": "odroid_n2",

.github/workflows/pr-checks.yml

@@ -6,22 +6,22 @@ on: [pull_request]
 
 jobs:
   linters:
-    runs-on: ubuntu-22.04
+    runs-on: ubuntu-20.04
     steps:
     - name: Check out code
-      uses: actions/checkout@v3
+      uses: actions/checkout@v2
       with:
         submodules: true
 
     - name: Check Dockerfile
-      uses: brpaz/hadolint-action@v1.5.0
+      uses: brpaz/hadolint-action@v1.1.0
       with:
         dockerfile: Dockerfile
 
     - name: Check shell scripts
-      uses: ludeeus/action-shellcheck@2.0.0
+      uses: ludeeus/action-shellcheck@1.1.0
       with:
-        ignore: buildroot
+        ignore: buildroot buildroot-external/package/xe-guest-utilities
 
     - name: Check buildroot-external packages
       run: |

.github/workflows/release-drafter.yml

@@ -8,9 +8,6 @@ on:
 
 jobs:
   update_release_draft:
-    permissions:
-      contents: write  # for release-drafter/release-drafter to create a github release
-      pull-requests: read  # for release-drafter/release-drafter to read PR content and labels
     runs-on: ubuntu-latest
     steps:
       - uses: release-drafter/release-drafter@v5

.github/workflows/release.yml

@@ -15,7 +15,7 @@ jobs:
       version_dev: ${{ steps.version_check.outputs.version_dev }}
       matrix: ${{ steps.generate_matrix.outputs.result }}
     steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v2
       - name: Validate version
         id: version_check
         run: |
@@ -29,13 +29,14 @@ jobs:
             exit 1
           fi
           if [ "" != "${tag_dev}" ]; then
-            echo "version=${major}.${build}.${tag_dev}" >> $GITHUB_OUTPUT
+            echo "Note: Release build with custom dev part: ${tag_dev}."
+            echo "::set-output name=version::${major}.${build}.${tag_dev}"
           else
-            echo "version=${major}.${build}" >> $GITHUB_OUTPUT
+            echo "::set-output name=version::${major}.${build}"
           fi
-          echo "version_dev=${tag_dev}" >> $GITHUB_OUTPUT
+          echo "::set-output name=version_dev::${tag_dev}"
       - name: Create build matrix
-        uses: actions/github-script@v6
+        uses: actions/github-script@v4
         id: generate_matrix
         with:
           script: |
@@ -43,8 +44,6 @@ jobs:
             return { "board": boards }
 
   build:
-    permissions:
-      contents: write  # for actions/upload-release-asset to upload release asset
     name: Release build for ${{ matrix.board.id }}
     needs: validate_release
     strategy:
@@ -53,7 +52,7 @@ jobs:
 
     steps:
       # Checks-out your repository under $GITHUB_WORKSPACE, so your job can access it
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v2
         with:
           submodules: true
 

.github/workflows/stale.yml

@@ -8,9 +8,6 @@ on:
 
 jobs:
   stale:
-    permissions:
-      issues: write  # for actions/stale to close stale issues
-      pull-requests: write  # for actions/stale to close stale PRs
     runs-on: ubuntu-latest
     steps:
       # The 90 day stale policy
@@ -19,7 +16,7 @@ jobs:
       # - No PRs marked as no-stale or pinned
       # - No issues marked as no-stale, help-wanted or pinned
       - name: 90 days stale issues & PRs policy
-        uses: actions/stale@v7.0.0
+        uses: actions/stale@v4
         with:
           repo-token: ${{ secrets.GITHUB_TOKEN }}
           days-before-stale: 90

.gitignore

@@ -1,12 +1,4 @@
-# OS generated files
 .DS_Store
-
-# Build output dirs
 /release
-output*/
-
-# Certificates
 *.pem
-
-# vscode generated files
-.vscode*
+output*/

.gitmodules

@@ -1,4 +1,4 @@
 [submodule "buildroot"]
 	path = buildroot
 	url = https://github.com/home-assistant/buildroot.git
-	branch = 2022.02.x-haos
+	branch = 2021.02.x-haos

Dockerfile

@@ -28,24 +28,27 @@ RUN apt-get update && apt-get install -y --no-install-recommends \
         cpio \
         file \
         git \
-        graphviz \
-        jq \
         make \
         ncurses-dev \
-        openssh-client \
         patch \
         perl \
         python3 \
         python3-matplotlib \
         python-is-python3 \
-        qemu-utils \
+        graphviz \
         rsync \
-        skopeo \
         sudo \
         unzip \
-        vim \
-        wget \
         zip \
+        wget \
+        qemu-utils \
+        openssh-client \
+        vim \
+    && rm -rf /var/lib/apt/lists/*
+
+RUN apt-get update && apt-get install -y --no-install-recommends \
+	skopeo \
+	jq \
     && rm -rf /var/lib/apt/lists/*
 
 # Init entry

Documentation/boards/README.md

@@ -13,12 +13,11 @@ The following boards/devices are supported:
   - Pi Zero-W (not recommended)
   - Pi (not recommended)
 - Hardkernel
-  - ODROID-C2
-  - ODROID-C4
-  - ODROID-M1
-  - ODROID-N2
-  - ODROID-N2+
-  - ODROID-XU4
+  - Odroid-N2
+  - Odroid-N2+
+  - Odroid-C2
+  - Odroid-C4
+  - Odroid-XU4
 - Asus
   - Tinker Board
 - Generic x86-64 (UEFI, not suited for virtualization)
@@ -46,11 +45,10 @@ Notes:
 |Pi3B 64-bit   |`make rpi3_64`       |[rpi3_64](../../buildroot-external/configs/rpi3_64_defconfig)|[raspberrypi](./raspberrypi/)|
 |Pi3B 32-bit   |`make rpi3`          |[rpi3](../../buildroot-external/configs/rpi3_defconfig)|[raspberrypi](./raspberrypi/)|
 |Pi2           |`make rpi2`          |[rpi2](../../buildroot-external/configs/rpi2_defconfig)|[raspberrypi](./raspberrypi/)|
-|ODROID-C2     |`make odroid_c2`     |[odroid_c2](../../buildroot-external/configs/odroid_c2_defconfig)|[hardkernel](./hardkernel/)|
-|ODROID-C4     |`make odroid_c4`     |[odroid_c4](../../buildroot-external/configs/odroid_c4_defconfig)|[hardkernel](./hardkernel/)|
-|ODROID-M1     |`make odroid_m1`     |[odroid_m1](../../buildroot-external/configs/odroid_m1_defconfig)|[hardkernel](./hardkernel/)|
-|ODROID-N2/N2+ |`make odroid_n2`     |[odroid_n2](../../buildroot-external/configs/odroid_n2_defconfig)|[hardkernel](./hardkernel/)|
-|ODROID-XU4    |`make odroid_xu4`    |[odroid_xu4](../../buildroot-external/configs/odroid_xu4_defconfig)|[hardkernel](./hardkernel/)|
+|Odroid-N2/N2+ |`make odroid_n2`     |[odroid_n2](../../buildroot-external/configs/odroid_n2_defconfig)|[hardkernel](./hardkernel/)|
+|Odroid-C2     |`make odroid_c2`     |[odroid_c2](../../buildroot-external/configs/odroid_c2_defconfig)|[hardkernel](./hardkernel/)|
+|Odroid-C4     |`make odroid_c4`     |[odroid_c4](../../buildroot-external/configs/odroid_c4_defconfig)|[hardkernel](./hardkernel/)|
+|Odroid-XU4    |`make odroid_xu4`    |[odroid_xu4](../../buildroot-external/configs/odroid_xu4_defconfig)|[hardkernel](./hardkernel/)|
 |Tinker Board  |`make tinker`        |[tinker](../../buildroot-external/configs/tinker_defconfig)|[asus](./asus/)|
 |Generic x86-64|`make generic_x86_64`|[generic_x86_64](../../buildroot-external/configs/generic_x86_64_defconfig)|[generic-x86-64](./generic-x86-64/)|
 |OVA           |`make ova`           |[ova](../../buildroot-external/configs/ova_defconfig)|[ova](./ova/)|

Documentation/boards/generic-x86-64/README.md

@@ -12,7 +12,6 @@ been tested with is listed below.
 |-----------------------|--------------|---------|-------------|
 | Intel NUC5CPYH        | Q3 2015      | yes     | [generic_x86_64](../../../buildroot-external/configs/generic_x86_64_defconfig) |
 | Intel NUC6CAYH        | Q4 2016      | yes     | [generic_x86_64](../../../buildroot-external/configs/generic_x86_64_defconfig) |
-| Intel NUC6CAYS        | Q4 2016      | yes     | [generic_x86_64](../../../buildroot-external/configs/generic_x86_64_defconfig) |
 | Intel NUC7i3DNHE	| Q3 2017      | yes     | [generic_x86_64](../../../buildroot-external/configs/generic_x86_64_defconfig) |
 | Intel NUC10i3FNK2     | Q4 2019      | yes     | [generic_x86_64](../../../buildroot-external/configs/generic_x86_64_defconfig) |
 | Gigabyte GB-BPCE-3455 | 2017         | yes*    | [generic_x86_64](../../../buildroot-external/configs/generic_x86_64_defconfig) |
@@ -49,7 +48,7 @@ The following cards are supported:
 
 ## Bluetooth
 
-Bluetooth integrated in Intel Wireless cards working OK, other options untested.
+Bluetooth is untested.
 
 ## Installation
 

Documentation/boards/hardkernel/README.md

@@ -4,11 +4,10 @@
 
 | Device         | Release Date  | Support      | Config    |
 |----------------|---------------|--------------|-----------|
-| ODROID-C2      | 2016          | yes          | [odroid_c2](../../../buildroot-external/configs/odroid_c2_defconfig) |
-| ODROID-C4      | 2020          | yes          | [odroid_c4](../../../buildroot-external/configs/odroid_c4_defconfig) |
-| ODROID-M1      | 2022          | yes          | [odroid_m1](../../../buildroot-external/configs/odroid_m1_defconfig) |
-| ODROID-N2      | 2019          | yes          | [odroid_n2](../../../buildroot-external/configs/odroid_n2_defconfig) |
 | ODROID-XU4     | 2015          | yes          | [odroid_xu4](../../../buildroot-external/configs/odroid_xu4_defconfig)|
+| ODROID-C2      | 2016          | yes          | [odroid_c2](../../../buildroot-external/configs/odroid_c2_defconfig) |
+| ODROID-C4      | 2020          | experimental | [odroid_c4](../../../buildroot-external/configs/odroid_c4_defconfig) |
+| ODROID-N2      | 2019          | yes          | [odroid_n2](../../../buildroot-external/configs/odroid_n2_defconfig) |
 
 See separate documentation for each board.
 

Documentation/boards/hardkernel/odroid-c2.md

@@ -1,4 +1,4 @@
-# ODROID-C2
+# Odroid-C2
 
 ## eMMC
 

Documentation/boards/hardkernel/odroid-c4.md

@@ -1,10 +1,10 @@
-# ODROID-C4
+# Odroid-C4
 
 ## Experimental
 
-ODROID-C4 support is based heavily on the Odroid-C2 and N2 configurations. Given the similarity of the SoCs, as well as the comparable level of support in the Linux kernel, the C4 should hopefully present few surprises. However, Home Assistant support should be regarded as experimental.
+Odroid-C4 support is based heavily on the Odroid-C2 and N2 configurations. Given the similarity of the SoCs, as well as the comparable level of support in the Linux kernel, the C4 should hopefully present few surprises. However, Home Assistant support should be regarded as experimental.
 
-Please also refer to the documentation pages for the [ODROID-C2](./odroid-c2.md) and [Odroid-N2](./odroid-n2.md), as some of that information may apply to the C4 as well.
+Please also refer to the documentation pages for the [Odroid-C2](./odroid-c2.md) and [Odroid-N2](./odroid-n2.md), as some of that information may apply to the C4 as well.
 
 Common C4 issues that have been specifically tested and appear to be working:
 - boot from SD

Documentation/boards/hardkernel/odroid-m1.md

@@ -1,37 +0,0 @@
-# ODROID-M1
-
-Home Assistant OS 10 and newer support the ODROID-M1 board.
-
-## SD-card
-
-SD-card boot is supported via on-board bootloader (SPL) or recovery button.
-
-## eMMC
-
-eMMC boot is currently only supported via recovery button. eMMC boot via
-on-board bootloader will require an update of Petitboot (as of March 13 2023,
-this update hasn't been released yet.
-
-## NVMe
-
-Booting directly from NVMe is not supported. The NVMe card can be used as a data disk.
-
-## Technical notes on boot flow
-
-The Home Assistant OS image is bootable by the SoC directly. This means that no help
-from the Hardkernel provided and pre-installed bootloader Petitboot is necessary.
-However, the ODROID-M1 automatically boots from internal SPI. To boot
-directly off the SD-card or eMMC you need to press the recovery button.
-
-The SPI flashed U-Boot SPL tries searches for an U-Boot binary on the SD-card
-(and future releases also on the eMMC). This mechanism allows you to boot the Home
-Assistant OS U-Boot without pressing the recovery button.
-
-## Console
-
-By default, console access is available on the serial header (CON1) and on HDMI.
-The serial console's baudrate is 1500000 by default.
-
-The systemd startup messages will only appear on the serial console by default.
-To show the messages on the HDMI console instead, add the console manually
-to the `cmdline.txt` file on the boot partition (e.g. `console=tty0`).

Documentation/boards/hardkernel/odroid-n2.md

@@ -1,4 +1,4 @@
-# ODROID-N2
+# Odroid-N2
 
 ## eMMC
 

Documentation/configuration.md

@@ -25,7 +25,8 @@ hassos-xy.raucb
 
 Text files that are on USB stick must have Unix (LF) end of line characters. If you create USB stick on Windows machine, be sure to use Notepad++, Visual Studio Code or any other editor, that supports different line endings. In Notepad++ LF EOL can be enabled with setting `Edit -> EOL Conversion -> Unix (LF)`.
 
-You can put this USB stick into the device and it will be read on startup and files written to the correct places. You can also trigger this process later using `ha os import` from the CLI or by calling `systemctl restart hassos-config` on the OS shell. *The USB Stick just needs to be inserted to the device during this setup process and can be removed afterwards.*
+You can put this USB stick into the device and it will be read on startup and files written to the correct places. You can also trigger this process later over the
+API/UI or by calling `systemctl restart hassos-config` on the host. *The USB Stick just needs to be inserted to the device during this setup process and can be disconnected afterwards.*
 
 ## Local
 
@@ -53,7 +54,7 @@ Our default NTP configuration look like:
 
 ```
 [Time]
-NTP=time.cloudflare.com
+NTP=time1.google.com time2.google.com time3.google.com
 FallbackNTP=0.pool.ntp.org 1.pool.ntp.org 2.pool.ntp.org 3.pool.ntp.org
 ```
 

Documentation/kernel.md

@@ -5,19 +5,18 @@ Default Kernel tree: 5.15
 
 | Board | Version |
 |-------|---------|
-| Open Virtual Appliance | 6.1.21 |
-| Raspberry Pi | 6.1.19 |
-| Raspberry Pi 0-W | 6.1.19 |
-| Raspberry Pi 2 | 6.1.19 |
-| Raspberry Pi 3 | 6.1.19 |
-| Raspberry Pi 4 | 6.1.19 |
-| Home Assistant Yellow | 6.1.19 |
-| Tinker Board | 6.1.21 |
-| ODROID-C2 | 6.1.21 |
-| ODROID-C4 | 6.1.21 |
-| ODROID-M1 | 6.1.21 |
-| ODROID-N2 | 6.1.21 |
-| ODROID-XU4 | 6.1.21 |
-| Generic aarch64 | 6.1.21 |
-| Generic x86-64 | 6.1.21 |
-| Khadas VIM3 | 6.1.21 |
+| Open Virtual Appliance | 5.15.45 |
+| Raspberry Pi | 5.15.32 |
+| Raspberry Pi 0-W | 5.15.32 |
+| Raspberry Pi 2 | 5.15.32 |
+| Raspberry Pi 3 | 5.15.32 |
+| Raspberry Pi 4 | 5.15.32 |
+| Home Assistant Yellow | 5.15.32 |
+| Tinker Board | 5.15.45 |
+| Odroid-C2 | 5.15.45 |
+| Odroid-C4 | 5.15.45 |
+| Odroid-N2 | 5.15.45 |
+| Odroid-XU4 | 5.15.45 |
+| Generic aarch64 | 5.15.45 |
+| Generic x86-64 | 5.15.45 |
+| Khadas VIM3 | 5.15.45 |

Documentation/network.md

@@ -128,12 +128,12 @@ profile using DHCP, use the following commands on the host console:
 
 Home Assistant OS will recreate the default connection profile during boot.
 
-### Enabling Wi-Fi
+### Enabling WiFi
 
-Wi-Fi is discouraged for reliability reasons. However, if you still prefer to use Wi-Fi, you can us the `ha network` command to set up Wi-Fi (example for a Raspberry Pi 4, check `ha network info` to check if your board supports Wi-Fi and the name of the Wi-Fi device):
+WiFi is discouraged for reliability reasons. However if you're still like to use WiFi, you can us the `ha network` command to set up WiFi (example for a Raspberry Pi 4, check `ha network info` to check if your board supports WiFi and the name of the WiFi device):
 
 ```bash
-ha network update wlan0 --ipv4-method auto --wifi-auth wpa-psk --wifi-mode infrastructure --wifi-ssid "MY-SSID" --wifi-psk MY_PASS
+ha network update wlan0 --enabled --ipv4-method auto --wifi-auth wpa-psk --wifi-mode infrastructure --wifi-ssid MY-SSID --wifi-psk MY_PASS
 ````
 
 ### Powersave

buildroot-external/Config.in

@@ -8,11 +8,10 @@ source "$BR2_EXTERNAL_HASSOS_PATH/package/khadas-boot/Config.in"
 source "$BR2_EXTERNAL_HASSOS_PATH/package/os-agent/Config.in"
 source "$BR2_EXTERNAL_HASSOS_PATH/package/pi-bluetooth/Config.in"
 source "$BR2_EXTERNAL_HASSOS_PATH/package/qemu-guest-agent/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/lxd-guest-agent/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/rockchip-blobs/Config.in"
 source "$BR2_EXTERNAL_HASSOS_PATH/package/rpi-eeprom/Config.in"
 source "$BR2_EXTERNAL_HASSOS_PATH/package/rpi-rf-mod/Config.in"
 source "$BR2_EXTERNAL_HASSOS_PATH/package/rtl88x2bu/Config.in"
+source "$BR2_EXTERNAL_HASSOS_PATH/package/rtl8821cu/Config.in"
 source "$BR2_EXTERNAL_HASSOS_PATH/package/tempio/Config.in.host"
 source "$BR2_EXTERNAL_HASSOS_PATH/package/udisks2/Config.in"
 source "$BR2_EXTERNAL_HASSOS_PATH/package/xe-guest-utilities/Config.in"

buildroot-external/board/arm-uefi/generic-aarch64/grub.cfg

@@ -15,52 +15,34 @@ for SLOT in $ORDER; do
         INDEX=0
         OK=$A_OK
         TRY=$A_TRY
+        A_TRY=1
     fi
     if [ "$SLOT" == "B" ]; then
         INDEX=1
         OK=$B_OK
         TRY=$B_TRY
+        B_TRY=1
     fi
-    if [ "$OK" -eq 1 -a "$TRY" -lt 3 ]; then
+    if [ "$OK" -eq 1 -a "$TRY" -eq 0 ]; then
         default=$INDEX
-
-        # increment attempts and save back to slot
-        if [ "$TRY" -eq 1 ]; then
-            TRY=2
-        elif [ "$TRY" -eq 2 ]; then
-            TRY=3
-	else
-            TRY=1
-        fi
-
-	if [ "$SLOT" == "A" ]; then
-            A_TRY=$TRY
-        fi
-	if [ "$SLOT" == "B" ]; then
-            B_TRY=$TRY
-        fi
-
         break
     fi
 done
 
-# No bootable slot found, choose rescue...
+# reset booted flags
 if [ "$default" -eq 99 ]; then
-    if [ "$A_OK" -eq 1 ]; then
-        default=2
+    if [ "$A_OK" -eq 1 -a "$A_TRY" -eq 1 ]; then
+        A_TRY=0
     fi
-    if [ "$B_OK" -eq 1 ]; then
-        default=3
+    if [ "$B_OK" -eq 1 -a "$B_TRY" -eq 1 ]; then
+        B_TRY=0
     fi
-fi
-
-if [ "$MACHINE_ID" == "" ]; then
-    boot_condition="systemd.condition-first-boot=true"
+    default=0
 fi
 
 save_env A_TRY A_OK B_TRY B_OK ORDER MACHINE_ID
 
-default_cmdline="rootwait zram.enabled=1 zram.num_devices=3 net.naming-scheme=v250 systemd.machine_id=$MACHINE_ID fsck.repair=yes $boot_condition"
+default_cmdline="rootwait zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor systemd.machine_id=$MACHINE_ID cgroup_enable=memory fsck.repair=yes"
 file_env -f ($root)/cmdline.txt cmdline
 
 # root is a full HDD/partition definition in GRUB format like hd0,gpt1
@@ -75,11 +57,3 @@ menuentry "Slot A (OK=$A_OK TRY=$A_TRY)" {
 menuentry "Slot B (OK=$B_OK TRY=$B_TRY)" {
     linux (${boothd},gpt4)/Image root=PARTUUID=a3ec664e-32ce-4665-95ea-7ae90ce9aa20 $default_cmdline $cmdline rauc.slot=B
 }
-
-menuentry "Slot A (rescue shell)" {
-    linux (${boothd},gpt2)/Image root=PARTUUID=8d3d53e3-6d49-4c38-8349-aff6859e82fd $default_cmdline $cmdline rauc.slot=A systemd.unit=recovery.target
-}
-
-menuentry "Slot B (rescue shell)" {
-    linux (${boothd},gpt4)/Image root=PARTUUID=a3ec664e-32ce-4665-95ea-7ae90ce9aa20 $default_cmdline $cmdline rauc.slot=B systemd.unit=recovery.target
-}

buildroot-external/board/arm-uefi/generic-aarch64/kernel.config

@@ -18,15 +18,3 @@ CONFIG_BLK_DEV_NVME=y
 CONFIG_NVME_HWMON=y
 
 CONFIG_DRM_VIRTIO_GPU=m
-
-CONFIG_HYPERVISOR_GUEST=y
-CONFIG_HYPERV=y
-CONFIG_HYPERV_UTILS=m
-CONFIG_HYPERV_BALLOON=m
-CONFIG_HYPERV_KEYBOARD=m
-CONFIG_HYPERV_STORAGE=y
-CONFIG_HYPERV_NET=y
-CONFIG_HYPERV_VSOCKETS=m
-CONFIG_PCI_HYPERV=m
-CONFIG_PCI_HYPERV_INTERFACE=m
-CONFIG_FB_HYPERV=y

buildroot-external/board/arm-uefi/generic-aarch64/meta

@@ -4,7 +4,6 @@ CHASSIS=embedded
 BOOTLOADER=grub
 KERNEL_FILE=Image
 BOOT_SYS=efi
-BOOT_SIZE=32M
 BOOT_SPL=false
 DISK_SIZE=6
 SUPERVISOR_MACHINE=qemuarm-64

buildroot-external/board/asus/tinker/kernel.config

@@ -120,6 +120,7 @@ CONFIG_CGROUP_WRITEBACK=y
 CONFIG_CGROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
 CONFIG_CGROUP_PIDS=y
 CONFIG_CGROUP_RDMA=y
 CONFIG_CGROUP_FREEZER=y

buildroot-external/board/asus/tinker/meta

@@ -4,9 +4,7 @@ CHASSIS=embedded
 BOOTLOADER=uboot
 KERNEL_FILE=zImage
 BOOT_SYS=hybrid
-BOOT_SIZE=24M
 BOOT_SPL=true
-BOOT_SPL_SIZE=8M
 BOOT_ENV_SIZE=0x8000
 SUPERVISOR_MACHINE=tinker
 SUPERVISOR_ARCH=armv7

buildroot-external/board/asus/tinker/patches/linux/0001-Revert-ARM-dts-rockchip-use-DMA-channels-for-UARTs-f.patch

@@ -1,5 +1,5 @@
-From 3553f8a938dbb498aa1846a37ea343b7f53739da Mon Sep 17 00:00:00 2001
-Message-Id: <3553f8a938dbb498aa1846a37ea343b7f53739da.1676488094.git.stefan@agner.ch>
+From ff0c5c49024da05b47d4fcc4d115761c43eef7a6 Mon Sep 17 00:00:00 2001
+Message-Id: <ff0c5c49024da05b47d4fcc4d115761c43eef7a6.1652225232.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Wed, 17 Feb 2021 19:55:41 +0100
 Subject: [PATCH] Revert "ARM: dts: rockchip: use DMA channels for UARTs for
@@ -11,7 +11,7 @@ This reverts commit 3425fe335c29310f6628faf9a7947d07f32d8962.
  1 file changed, 8 deletions(-)
 
 diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
-index 487b0e03d4b4..1569b1824c89 100644
+index 4dcdcf17c977..ff6faa82192b 100644
 --- a/arch/arm/boot/dts/rk3288.dtsi
 +++ b/arch/arm/boot/dts/rk3288.dtsi
 @@ -378,8 +378,6 @@ uart0: serial@ff180000 {
@@ -51,5 +51,5 @@ index 487b0e03d4b4..1569b1824c89 100644
  		pinctrl-0 = <&uart4_xfer>;
  		status = "disabled";
 -- 
-2.39.1
+2.36.1
 

buildroot-external/board/asus/tinker/patches/linux/0002-ARM-DTS-rk3288-tinker-Defining-the-SPI-interface.patch

@@ -1,7 +1,7 @@
-From 695638c05c0bb6f7bcc65e172dd132b3aa280b47 Mon Sep 17 00:00:00 2001
-Message-Id: <695638c05c0bb6f7bcc65e172dd132b3aa280b47.1676488094.git.stefan@agner.ch>
-In-Reply-To: <3553f8a938dbb498aa1846a37ea343b7f53739da.1676488094.git.stefan@agner.ch>
-References: <3553f8a938dbb498aa1846a37ea343b7f53739da.1676488094.git.stefan@agner.ch>
+From e73b4b762a0842cc75b2784e4c4267f6f4fc50c4 Mon Sep 17 00:00:00 2001
+Message-Id: <e73b4b762a0842cc75b2784e4c4267f6f4fc50c4.1652225232.git.stefan@agner.ch>
+In-Reply-To: <ff0c5c49024da05b47d4fcc4d115761c43eef7a6.1652225232.git.stefan@agner.ch>
+References: <ff0c5c49024da05b47d4fcc4d115761c43eef7a6.1652225232.git.stefan@agner.ch>
 From: "Miouyouyou (Myy)" <myy@miouyouyou.fr>
 Date: Mon, 5 Nov 2018 22:15:14 +0100
 Subject: [PATCH] ARM: DTS: rk3288-tinker: Defining the SPI interface
@@ -21,10 +21,10 @@ Signed-off-by: Stefan Agner <stefan@agner.ch>
  1 file changed, 19 insertions(+)
 
 diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
-index 09618bb7d872..30430d2e64b9 100644
+index 9c1e38c54eae..cf278bcc91ad 100644
 --- a/arch/arm/boot/dts/rk3288-tinker.dtsi
 +++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
-@@ -483,6 +483,25 @@ &sdio0 {
+@@ -485,6 +485,25 @@ &sdio0 {
  	status = "okay";
  };
  
@@ -51,5 +51,5 @@ index 09618bb7d872..30430d2e64b9 100644
  	rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
  	rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
 -- 
-2.39.1
+2.36.1
 

buildroot-external/board/asus/tinker/patches/linux/0003-ARM-dts-rockchip-enable-I2C1-4-on-rk3288-tinker.patch

@@ -1,7 +1,7 @@
-From d04122215cb56b57458e05b475e41744b8126533 Mon Sep 17 00:00:00 2001
-Message-Id: <d04122215cb56b57458e05b475e41744b8126533.1676488094.git.stefan@agner.ch>
-In-Reply-To: <3553f8a938dbb498aa1846a37ea343b7f53739da.1676488094.git.stefan@agner.ch>
-References: <3553f8a938dbb498aa1846a37ea343b7f53739da.1676488094.git.stefan@agner.ch>
+From 00de5155d12a178b83961f459ddccd7fa08ec25c Mon Sep 17 00:00:00 2001
+Message-Id: <00de5155d12a178b83961f459ddccd7fa08ec25c.1652225232.git.stefan@agner.ch>
+In-Reply-To: <ff0c5c49024da05b47d4fcc4d115761c43eef7a6.1652225232.git.stefan@agner.ch>
+References: <ff0c5c49024da05b47d4fcc4d115761c43eef7a6.1652225232.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Fri, 4 Sep 2020 21:57:55 +0200
 Subject: [PATCH] ARM: dts: rockchip: enable I2C1/4 on rk3288-tinker
@@ -14,10 +14,10 @@ Signed-off-by: Stefan Agner <stefan@agner.ch>
  1 file changed, 8 insertions(+)
 
 diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
-index 30430d2e64b9..395afc2b2283 100644
+index cf278bcc91ad..f23c6efd39d4 100644
 --- a/arch/arm/boot/dts/rk3288-tinker.dtsi
 +++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
-@@ -342,10 +342,18 @@ regulator-state-mem {
+@@ -344,10 +344,18 @@ regulator-state-mem {
  	};
  };
  
@@ -37,5 +37,5 @@ index 30430d2e64b9..395afc2b2283 100644
  	status = "okay";
  };
 -- 
-2.39.1
+2.36.1
 

buildroot-external/board/asus/tinker/patches/linux/0004-RK3288-DTSI-rk3288.dtsi-Add-missing-SPI2-pinctrl.patch

@@ -1,7 +1,7 @@
-From 7d37754f29c379c5066c6abf38c8d01d654b1613 Mon Sep 17 00:00:00 2001
-Message-Id: <7d37754f29c379c5066c6abf38c8d01d654b1613.1676488094.git.stefan@agner.ch>
-In-Reply-To: <3553f8a938dbb498aa1846a37ea343b7f53739da.1676488094.git.stefan@agner.ch>
-References: <3553f8a938dbb498aa1846a37ea343b7f53739da.1676488094.git.stefan@agner.ch>
+From e45da42e71e4f92995d5ec11679ca00b0971dbfe Mon Sep 17 00:00:00 2001
+Message-Id: <e45da42e71e4f92995d5ec11679ca00b0971dbfe.1652225232.git.stefan@agner.ch>
+In-Reply-To: <ff0c5c49024da05b47d4fcc4d115761c43eef7a6.1652225232.git.stefan@agner.ch>
+References: <ff0c5c49024da05b47d4fcc4d115761c43eef7a6.1652225232.git.stefan@agner.ch>
 From: Myy Miouyouyou <myy@miouyouyou.fr>
 Date: Thu, 19 Oct 2017 21:24:47 +0200
 Subject: [PATCH] RK3288: DTSI: rk3288.dtsi: Add missing SPI2 pinctrl
@@ -17,7 +17,7 @@ Signed-off-by: Myy Miouyouyou <myy@miouyouyou.fr>
  1 file changed, 1 insertion(+), 1 deletion(-)
 
 diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
-index 1569b1824c89..478fd1bb85df 100644
+index ff6faa82192b..5061c5418d75 100644
 --- a/arch/arm/boot/dts/rk3288.dtsi
 +++ b/arch/arm/boot/dts/rk3288.dtsi
 @@ -311,7 +311,7 @@ spi2: spi@ff130000 {
@@ -30,5 +30,5 @@ index 1569b1824c89..478fd1bb85df 100644
  		#address-cells = <1>;
  		#size-cells = <0>;
 -- 
-2.39.1
+2.36.1
 

buildroot-external/board/asus/tinker/patches/linux/0005-ARM-DTSI-rk3288-tinker-Improving-the-CPU-max-voltage.patch

@@ -1,7 +1,7 @@
-From 05fde1d1dbbe7805a58a8c445b8fb19e0df59826 Mon Sep 17 00:00:00 2001
-Message-Id: <05fde1d1dbbe7805a58a8c445b8fb19e0df59826.1676488094.git.stefan@agner.ch>
-In-Reply-To: <3553f8a938dbb498aa1846a37ea343b7f53739da.1676488094.git.stefan@agner.ch>
-References: <3553f8a938dbb498aa1846a37ea343b7f53739da.1676488094.git.stefan@agner.ch>
+From e33d3ba4c34d0893d9d07b62ad4eea41d2e8bbc0 Mon Sep 17 00:00:00 2001
+Message-Id: <e33d3ba4c34d0893d9d07b62ad4eea41d2e8bbc0.1652225232.git.stefan@agner.ch>
+In-Reply-To: <ff0c5c49024da05b47d4fcc4d115761c43eef7a6.1652225232.git.stefan@agner.ch>
+References: <ff0c5c49024da05b47d4fcc4d115761c43eef7a6.1652225232.git.stefan@agner.ch>
 From: "Miouyouyou (Myy)" <myy@miouyouyou.fr>
 Date: Mon, 5 Nov 2018 20:16:05 +0100
 Subject: [PATCH] ARM: DTSI: rk3288-tinker: Improving the CPU max voltage
@@ -14,10 +14,10 @@ Signed-off-by: Miouyouyou (Myy) <myy@miouyouyou.fr>
  1 file changed, 1 insertion(+), 1 deletion(-)
 
 diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
-index 395afc2b2283..c7e79e594720 100644
+index f23c6efd39d4..cdff130d1292 100644
 --- a/arch/arm/boot/dts/rk3288-tinker.dtsi
 +++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
-@@ -184,7 +184,7 @@ vdd_cpu: DCDC_REG1 {
+@@ -186,7 +186,7 @@ vdd_cpu: DCDC_REG1 {
  				regulator-always-on;
  				regulator-boot-on;
  				regulator-min-microvolt = <750000>;
@@ -27,5 +27,5 @@ index 395afc2b2283..c7e79e594720 100644
  				regulator-ramp-delay = <6000>;
  				regulator-state-mem {
 -- 
-2.39.1
+2.36.1
 

buildroot-external/board/asus/tinker/patches/linux/0006-drivers-mmc-dw-mci-rockchip-Handle-ASUS-Tinkerboard-.patch

@@ -1,7 +1,7 @@
-From 940d61e1e04929166d5a2bcbc1934aa931952ca5 Mon Sep 17 00:00:00 2001
-Message-Id: <940d61e1e04929166d5a2bcbc1934aa931952ca5.1676488094.git.stefan@agner.ch>
-In-Reply-To: <3553f8a938dbb498aa1846a37ea343b7f53739da.1676488094.git.stefan@agner.ch>
-References: <3553f8a938dbb498aa1846a37ea343b7f53739da.1676488094.git.stefan@agner.ch>
+From e073d75cd0dbfbcbbf1b46e565b326db37b75e6a Mon Sep 17 00:00:00 2001
+Message-Id: <e073d75cd0dbfbcbbf1b46e565b326db37b75e6a.1652225232.git.stefan@agner.ch>
+In-Reply-To: <ff0c5c49024da05b47d4fcc4d115761c43eef7a6.1652225232.git.stefan@agner.ch>
+References: <ff0c5c49024da05b47d4fcc4d115761c43eef7a6.1652225232.git.stefan@agner.ch>
 From: Myy Miouyouyou <myy@miouyouyou.fr>
 Date: Sun, 7 Jan 2018 01:52:44 +0100
 Subject: [PATCH] drivers: mmc: dw-mci-rockchip: Handle ASUS Tinkerboard reboot
@@ -24,7 +24,7 @@ Signed-off-by: Myy Miouyouyou <myy@miouyouyou.fr>
  1 file changed, 66 insertions(+)
 
 diff --git a/drivers/mmc/host/dw_mmc-rockchip.c b/drivers/mmc/host/dw_mmc-rockchip.c
-index 2a99f15f527f..181718374429 100644
+index d36991acd6df..a526927e29df 100644
 --- a/drivers/mmc/host/dw_mmc-rockchip.c
 +++ b/drivers/mmc/host/dw_mmc-rockchip.c
 @@ -12,6 +12,11 @@
@@ -39,7 +39,7 @@ index 2a99f15f527f..181718374429 100644
  #include "dw_mmc.h"
  #include "dw_mmc-pltfm.h"
  
-@@ -340,6 +345,66 @@ static const struct of_device_id dw_mci_rockchip_match[] = {
+@@ -330,6 +335,66 @@ static const struct of_device_id dw_mci_rockchip_match[] = {
  };
  MODULE_DEVICE_TABLE(of, dw_mci_rockchip_match);
  
@@ -106,7 +106,7 @@ index 2a99f15f527f..181718374429 100644
  static int dw_mci_rockchip_probe(struct platform_device *pdev)
  {
  	const struct dw_mci_drv_data *drv_data;
-@@ -367,6 +432,7 @@ static int dw_mci_rockchip_probe(struct platform_device *pdev)
+@@ -357,6 +422,7 @@ static int dw_mci_rockchip_probe(struct platform_device *pdev)
  	}
  
  	pm_runtime_put_autosuspend(&pdev->dev);
@@ -115,5 +115,5 @@ index 2a99f15f527f..181718374429 100644
  	return 0;
  }
 -- 
-2.39.1
+2.36.1
 

buildroot-external/board/asus/tinker/patches/linux/0007-ARM-dts-rockchip-Add-Bluetooth-to-rk3288-tinker.patch

@@ -1,7 +1,7 @@
-From 479e2acb95c09b15382b3766391294790ebd200b Mon Sep 17 00:00:00 2001
-Message-Id: <479e2acb95c09b15382b3766391294790ebd200b.1676488094.git.stefan@agner.ch>
-In-Reply-To: <3553f8a938dbb498aa1846a37ea343b7f53739da.1676488094.git.stefan@agner.ch>
-References: <3553f8a938dbb498aa1846a37ea343b7f53739da.1676488094.git.stefan@agner.ch>
+From 392472dc977300a9f2a62159c105a6dfed878643 Mon Sep 17 00:00:00 2001
+Message-Id: <392472dc977300a9f2a62159c105a6dfed878643.1652225232.git.stefan@agner.ch>
+In-Reply-To: <ff0c5c49024da05b47d4fcc4d115761c43eef7a6.1652225232.git.stefan@agner.ch>
+References: <ff0c5c49024da05b47d4fcc4d115761c43eef7a6.1652225232.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Tue, 10 May 2022 22:57:26 +0200
 Subject: [PATCH] ARM: dts: rockchip: Add Bluetooth to rk3288-tinker
@@ -15,10 +15,10 @@ Signed-off-by: Stefan Agner <stefan@agner.ch>
  1 file changed, 26 insertions(+)
 
 diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
-index c7e79e594720..5d261fae6e72 100644
+index cdff130d1292..e904c130dedc 100644
 --- a/arch/arm/boot/dts/rk3288-tinker.dtsi
 +++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
-@@ -386,6 +386,20 @@ bl_en: bl-en {
+@@ -388,6 +388,20 @@ bl_en: bl-en {
  		};
  	};
  
@@ -39,7 +39,7 @@ index c7e79e594720..5d261fae6e72 100644
  	buttons {
  		pwrbtn: pwrbtn {
  			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
-@@ -518,6 +532,18 @@ &tsadc {
+@@ -520,6 +534,18 @@ &tsadc {
  
  &uart0 {
  	status = "okay";
@@ -59,5 +59,5 @@ index c7e79e594720..5d261fae6e72 100644
  
  &uart1 {
 -- 
-2.39.1
+2.36.1
 

buildroot-external/board/asus/tinker/uboot-boot.ush

@@ -16,11 +16,8 @@ test -n "${BOOT_ORDER}" || setenv BOOT_ORDER "A B"
 test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3
 test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3
 
-# Allows ConditionFirstBoot=
-test -n "${MACHINE_ID}" || setenv BOOT_CONDITION "systemd.condition-first-boot=true"
-
 # HassOS bootargs
-setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 net.naming-scheme=v250 systemd.machine_id=${MACHINE_ID} fsck.repair=yes ${BOOT_CONDITION}"
+setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor systemd.machine_id=${MACHINE_ID} cgroup_enable=memory fsck.repair=yes"
 
 # HassOS system A/B
 setenv bootargs_a "root=PARTUUID=8d3d53e3-6d49-4c38-8349-aff6859e82fd rootfstype=squashfs ro rootwait"

buildroot-external/board/hardkernel/kernel-amlogic.config

@@ -145,6 +145,7 @@ CONFIG_CGROUP_WRITEBACK=y
 CONFIG_CGROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
 CONFIG_CGROUP_PIDS=y
 # CONFIG_CGROUP_RDMA is not set
 CONFIG_CGROUP_FREEZER=y
@@ -1616,6 +1617,8 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
 CONFIG_FW_LOADER_PAGED_BUF=y
 CONFIG_EXTRA_FIRMWARE=""
+CONFIG_FW_LOADER_USER_HELPER=y
+CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
 # CONFIG_FW_LOADER_COMPRESS is not set
 CONFIG_FW_CACHE=y
 # end of Firmware loader

buildroot-external/board/hardkernel/odroid-c2/meta

@@ -1,12 +1,10 @@
 BOARD_ID=odroid-c2
-BOARD_NAME="Hardkernel ODROID-C2"
+BOARD_NAME="Hardkernel Odroid-C2"
 CHASSIS=embedded
 BOOTLOADER=uboot
 KERNEL_FILE=Image
 BOOT_SYS=mbr
-BOOT_SIZE=24M
 BOOT_SPL=true
-BOOT_SPL_SIZE=8M
 BOOT_ENV_SIZE=0x2000
 SUPERVISOR_MACHINE=odroid-c2
 SUPERVISOR_ARCH=aarch64

buildroot-external/board/hardkernel/odroid-c2/uboot-boot.ush

@@ -18,11 +18,8 @@ test -n "${BOOT_ORDER}" || setenv BOOT_ORDER "A B"
 test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3
 test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3
 
-# Allows ConditionFirstBoot=
-test -n "${MACHINE_ID}" || setenv BOOT_CONDITION "systemd.condition-first-boot=true"
-
 # HassOS bootargs
-setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 net.naming-scheme=v250 systemd.machine_id=${MACHINE_ID} fsck.repair=yes ${BOOT_CONDITION}"
+setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor systemd.machine_id=${MACHINE_ID} cgroup_enable=memory fsck.repair=yes"
 
 # HassOS system A/B
 setenv bootargs_a "root=PARTUUID=48617373-06 rootfstype=squashfs ro rootwait"

buildroot-external/board/hardkernel/odroid-c4/meta

@@ -1,12 +1,10 @@
 BOARD_ID=odroid-c4
-BOARD_NAME="Hardkernel ODROID-C4"
+BOARD_NAME="Hardkernel Odroid-C4"
 CHASSIS=embedded
 BOOTLOADER=uboot
 KERNEL_FILE=Image
 BOOT_SYS=mbr
-BOOT_SIZE=24M
 BOOT_SPL=true
-BOOT_SPL_SIZE=8M
 BOOT_ENV_SIZE=0x2000
 SUPERVISOR_MACHINE=odroid-c4
 SUPERVISOR_ARCH=aarch64

buildroot-external/board/hardkernel/odroid-c4/uboot-boot.ush

@@ -18,11 +18,8 @@ test -n "${BOOT_ORDER}" || setenv BOOT_ORDER "A B"
 test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3
 test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3
 
-# Allows ConditionFirstBoot=
-test -n "${MACHINE_ID}" || setenv BOOT_CONDITION "systemd.condition-first-boot=true"
-
 # HassOS bootargs
-setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 net.naming-scheme=v250 systemd.machine_id=${MACHINE_ID} clk_ignore_unused usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u ${BOOT_CONDITION}"
+setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor systemd.machine_id=${MACHINE_ID} cgroup_enable=memory clk_ignore_unused usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u"
 
 # HassOS system A/B
 setenv bootargs_a "root=PARTUUID=48617373-06 rootfstype=squashfs ro rootwait"

buildroot-external/board/hardkernel/odroid-m1/hassos-hook.sh

@@ -1,25 +0,0 @@
-#!/bin/bash
-# shellcheck disable=SC2155
-
-function hassos_pre_image() {
-    local BOOT_DATA="$(path_boot_dir)"
-    local SPL_IMG="$(path_spl_img)"
-
-    cp "${BINARIES_DIR}/boot.scr" "${BOOT_DATA}/boot.scr"
-    cp "${BINARIES_DIR}"/*.dtb "${BOOT_DATA}/"
-
-    cp "${BOARD_DIR}/boot-env.txt" "${BOOT_DATA}/haos-config.txt"
-    cp "${BOARD_DIR}/cmdline.txt" "${BOOT_DATA}/cmdline.txt"
-
-    # SPL
-    create_spl_image
-
-    dd if="${BINARIES_DIR}/idbloader.img" of="${SPL_IMG}" conv=notrunc bs=512 seek=64
-    dd if="${BINARIES_DIR}/u-boot.itb" of="${SPL_IMG}" conv=notrunc bs=512 seek=16384
-}
-
-
-function hassos_post_image() {
-    convert_disk_image_xz
-}
-

buildroot-external/board/hardkernel/odroid-m1/kernel.config

@@ -1,9 +0,0 @@
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-
-CONFIG_THERMAL_GOV_BANG_BANG=y
-CONFIG_SENSORS_GPIO_FAN=y
-
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_GPIO_POLLED=y
-
-CONFIG_MMC_SDHCI_OF_DWCMSHC=y

buildroot-external/board/hardkernel/odroid-m1/meta

@@ -1,12 +0,0 @@
-BOARD_ID=odroid-m1
-BOARD_NAME="Hardkernel ODROID-M1"
-CHASSIS=embedded
-BOOTLOADER=uboot
-KERNEL_FILE=Image
-BOOT_SYS=gpt
-BOOT_SIZE=16M
-BOOT_SPL=true
-BOOT_SPL_SIZE=16M
-BOOT_ENV_SIZE=0x8000
-SUPERVISOR_MACHINE=odroid-m1
-SUPERVISOR_ARCH=aarch64

buildroot-external/board/hardkernel/odroid-m1/patches/linux/0001-arm64-dts-rockchip-Add-Hardkernel-ODROID-M1-board.patch

@@ -1,455 +0,0 @@
-From d388735d551e09b00317a509859fca51776b9826 Mon Sep 17 00:00:00 2001
-Message-Id: <d388735d551e09b00317a509859fca51776b9826.1678107917.git.stefan@agner.ch>
-From: Dongjin Kim <tobetter@gmail.com>
-Date: Fri, 30 Sep 2022 07:12:35 +0200
-Subject: [PATCH] arm64: dts: rockchip: Add Hardkernel ODROID-M1 board
-
-This patch is to add a device tree for new board Hardkernel ODROID-M1
-based on Rockchip RK3568, includes basic peripherals -
-uart/eMMC/uSD/i2c and on-board ethernet.
-
-Signed-off-by: Dongjin Kim <tobetter@gmail.com>
-[aurelien@aurel32.net: addressed issues from initial review]
-Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
-Tested-by: Dan Johansen <strit@manjaro.org>
-Link: https://lore.kernel.org/r/20220930051246.391614-3-aurelien@aurel32.net
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- arch/arm64/boot/dts/rockchip/Makefile         |   1 +
- .../boot/dts/rockchip/rk3568-odroid-m1.dts    | 414 ++++++++++++++++++
- 2 files changed, 415 insertions(+)
- create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-
-diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
-index 8c15593c0ca4..5dc1607b3ecf 100644
---- a/arch/arm64/boot/dts/rockchip/Makefile
-+++ b/arch/arm64/boot/dts/rockchip/Makefile
-@@ -71,4 +71,5 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-roc-pc.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-cm4.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
-+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-odroid-m1.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
-diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-new file mode 100644
-index 000000000000..b3016437640b
---- /dev/null
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-@@ -0,0 +1,414 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright (c) 2022 Hardkernel Co., Ltd.
-+ *
-+ */
-+
-+/dts-v1/;
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/leds/common.h>
-+#include <dt-bindings/pinctrl/rockchip.h>
-+#include "rk3568.dtsi"
-+
-+/ {
-+	model = "Hardkernel ODROID-M1";
-+	compatible = "rockchip,rk3568-odroid-m1", "rockchip,rk3568";
-+
-+	aliases {
-+		ethernet0 = &gmac0;
-+		i2c0 = &i2c3;
-+		i2c3 = &i2c0;
-+		mmc0 = &sdhci;
-+		mmc1 = &sdmmc0;
-+		serial0 = &uart1;
-+		serial1 = &uart0;
-+	};
-+
-+	chosen {
-+		stdout-path = "serial2:1500000n8";
-+	};
-+
-+	dc_12v: dc-12v-regulator {
-+		compatible = "regulator-fixed";
-+		regulator-name = "dc_12v";
-+		regulator-always-on;
-+		regulator-boot-on;
-+		regulator-min-microvolt = <12000000>;
-+		regulator-max-microvolt = <12000000>;
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+
-+		led_power: led-0 {
-+			gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
-+			function = LED_FUNCTION_POWER;
-+			color = <LED_COLOR_ID_RED>;
-+			default-state = "keep";
-+			linux,default-trigger = "default-on";
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&led_power_pin>;
-+		};
-+		led_work: led-1 {
-+			gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
-+			function = LED_FUNCTION_HEARTBEAT;
-+			color = <LED_COLOR_ID_BLUE>;
-+			linux,default-trigger = "heartbeat";
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&led_work_pin>;
-+		};
-+	};
-+
-+	vcc3v3_sys: vcc3v3-sys-regulator {
-+		compatible = "regulator-fixed";
-+		regulator-name = "vcc3v3_sys";
-+		regulator-always-on;
-+		regulator-boot-on;
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+		vin-supply = <&dc_12v>;
-+	};
-+};
-+
-+&cpu0 {
-+	cpu-supply = <&vdd_cpu>;
-+};
-+
-+&cpu1 {
-+	cpu-supply = <&vdd_cpu>;
-+};
-+
-+&cpu2 {
-+	cpu-supply = <&vdd_cpu>;
-+};
-+
-+&cpu3 {
-+	cpu-supply = <&vdd_cpu>;
-+};
-+
-+&gmac0 {
-+	assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
-+	assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>;
-+	assigned-clock-rates = <0>, <125000000>;
-+	clock_in_out = "output";
-+	phy-handle = <&rgmii_phy0>;
-+	phy-mode = "rgmii";
-+	phy-supply = <&vcc3v3_sys>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&gmac0_miim
-+		     &gmac0_tx_bus2
-+		     &gmac0_rx_bus2
-+		     &gmac0_rgmii_clk
-+		     &gmac0_rgmii_bus>;
-+	status = "okay";
-+
-+	tx_delay = <0x4f>;
-+	rx_delay = <0x2d>;
-+};
-+
-+&i2c0 {
-+	status = "okay";
-+
-+	vdd_cpu: regulator@1c {
-+		compatible = "tcs,tcs4525";
-+		reg = <0x1c>;
-+		fcs,suspend-voltage-selector = <1>;
-+		regulator-name = "vdd_cpu";
-+		regulator-always-on;
-+		regulator-boot-on;
-+		regulator-min-microvolt = <800000>;
-+		regulator-max-microvolt = <1150000>;
-+		regulator-ramp-delay = <2300>;
-+		vin-supply = <&vcc3v3_sys>;
-+
-+		regulator-state-mem {
-+			regulator-off-in-suspend;
-+		};
-+	};
-+
-+	rk809: pmic@20 {
-+		compatible = "rockchip,rk809";
-+		reg = <0x20>;
-+		interrupt-parent = <&gpio0>;
-+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
-+		#clock-cells = <1>;
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&pmic_int_l>;
-+		rockchip,system-power-controller;
-+		vcc1-supply = <&vcc3v3_sys>;
-+		vcc2-supply = <&vcc3v3_sys>;
-+		vcc3-supply = <&vcc3v3_sys>;
-+		vcc4-supply = <&vcc3v3_sys>;
-+		vcc5-supply = <&vcc3v3_sys>;
-+		vcc6-supply = <&vcc3v3_sys>;
-+		vcc7-supply = <&vcc3v3_sys>;
-+		vcc8-supply = <&vcc3v3_sys>;
-+		vcc9-supply = <&vcc3v3_sys>;
-+		wakeup-source;
-+
-+		regulators {
-+			vdd_logic: DCDC_REG1 {
-+				regulator-name = "vdd_logic";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-init-microvolt = <900000>;
-+				regulator-initial-mode = <0x2>;
-+				regulator-min-microvolt = <500000>;
-+				regulator-max-microvolt = <1350000>;
-+				regulator-ramp-delay = <6001>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vdd_gpu: DCDC_REG2 {
-+				regulator-name = "vdd_gpu";
-+				regulator-always-on;
-+				regulator-init-microvolt = <900000>;
-+				regulator-initial-mode = <0x2>;
-+				regulator-min-microvolt = <500000>;
-+				regulator-max-microvolt = <1350000>;
-+				regulator-ramp-delay = <6001>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vcc_ddr: DCDC_REG3 {
-+				regulator-name = "vcc_ddr";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-initial-mode = <0x2>;
-+
-+				regulator-state-mem {
-+					regulator-on-in-suspend;
-+				};
-+			};
-+
-+			vdd_npu: DCDC_REG4 {
-+				regulator-name = "vdd_npu";
-+				regulator-init-microvolt = <900000>;
-+				regulator-initial-mode = <0x2>;
-+				regulator-min-microvolt = <500000>;
-+				regulator-max-microvolt = <1350000>;
-+				regulator-ramp-delay = <6001>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vcc_1v8: DCDC_REG5 {
-+				regulator-name = "vcc_1v8";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <1800000>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vdda0v9_image: LDO_REG1 {
-+				regulator-name = "vdda0v9_image";
-+				regulator-always-on;
-+				regulator-min-microvolt = <900000>;
-+				regulator-max-microvolt = <900000>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vdda_0v9: LDO_REG2 {
-+				regulator-name = "vdda_0v9";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <900000>;
-+				regulator-max-microvolt = <900000>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vdda0v9_pmu: LDO_REG3 {
-+				regulator-name = "vdda0v9_pmu";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <900000>;
-+				regulator-max-microvolt = <900000>;
-+
-+				regulator-state-mem {
-+					regulator-on-in-suspend;
-+					regulator-suspend-microvolt = <900000>;
-+				};
-+			};
-+
-+			vccio_acodec: LDO_REG4 {
-+				regulator-name = "vccio_acodec";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <3300000>;
-+				regulator-max-microvolt = <3300000>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vccio_sd: LDO_REG5 {
-+				regulator-name = "vccio_sd";
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <3300000>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vcc3v3_pmu: LDO_REG6 {
-+				regulator-name = "vcc3v3_pmu";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <3300000>;
-+				regulator-max-microvolt = <3300000>;
-+
-+				regulator-state-mem {
-+					regulator-on-in-suspend;
-+					regulator-suspend-microvolt = <3300000>;
-+				};
-+			};
-+
-+			vcca_1v8: LDO_REG7 {
-+				regulator-name = "vcca_1v8";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <1800000>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vcca1v8_pmu: LDO_REG8 {
-+				regulator-name = "vcca1v8_pmu";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <1800000>;
-+
-+				regulator-state-mem {
-+					regulator-on-in-suspend;
-+					regulator-suspend-microvolt = <1800000>;
-+				};
-+			};
-+
-+			vcca1v8_image: LDO_REG9 {
-+				regulator-name = "vcca1v8_image";
-+				regulator-always-on;
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <1800000>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vcc_3v3: SWITCH_REG1 {
-+				regulator-name = "vcc_3v3";
-+				regulator-always-on;
-+				regulator-boot-on;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vcc3v3_sd: SWITCH_REG2 {
-+				regulator-name = "vcc3v3_sd";
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+		};
-+	};
-+};
-+
-+&mdio0 {
-+	rgmii_phy0: ethernet-phy@0 {
-+		compatible = "ethernet-phy-ieee802.3-c22";
-+		reg = <0x0>;
-+		reset-assert-us = <20000>;
-+		reset-deassert-us = <100000>;
-+		reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
-+	};
-+};
-+
-+&pinctrl {
-+	leds {
-+		led_power_pin: led-power-pin {
-+			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+		led_work_pin: led-work-pin {
-+			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+	};
-+
-+	pmic {
-+		pmic_int_l: pmic-int-l {
-+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
-+		};
-+	};
-+};
-+
-+&pmu_io_domains {
-+	pmuio1-supply = <&vcc3v3_pmu>;
-+	pmuio2-supply = <&vcc3v3_pmu>;
-+	vccio1-supply = <&vccio_acodec>;
-+	vccio2-supply = <&vcc_1v8>;
-+	vccio3-supply = <&vccio_sd>;
-+	vccio4-supply = <&vcc_1v8>;
-+	vccio5-supply = <&vcc_3v3>;
-+	vccio6-supply = <&vcc_3v3>;
-+	vccio7-supply = <&vcc_3v3>;
-+	status = "okay";
-+};
-+
-+&saradc {
-+	vref-supply = <&vcca_1v8>;
-+	status = "okay";
-+};
-+
-+&sdhci {
-+	bus-width = <8>;
-+	max-frequency = <200000000>;
-+	non-removable;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe &emmc_rstnout>;
-+	vmmc-supply = <&vcc_3v3>;
-+	vqmmc-supply = <&vcc_1v8>;
-+	status = "okay";
-+};
-+
-+&sdmmc0 {
-+	bus-width = <4>;
-+	cap-sd-highspeed;
-+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
-+	disable-wp;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
-+	sd-uhs-sdr50;
-+	vmmc-supply = <&vcc3v3_sd>;
-+	vqmmc-supply = <&vccio_sd>;
-+	status = "okay";
-+};
-+
-+&uart2 {
-+	status = "okay";
-+};
--- 
-2.39.2
-

buildroot-external/board/hardkernel/odroid-m1/patches/linux/0002-arm64-dts-rockchip-add-thermal-support-to-ODROID-M1.patch

@@ -1,38 +0,0 @@
-From 24048c1753916bd983746542b16d19d2b399eeb7 Mon Sep 17 00:00:00 2001
-Message-Id: <24048c1753916bd983746542b16d19d2b399eeb7.1678107917.git.stefan@agner.ch>
-In-Reply-To: <d388735d551e09b00317a509859fca51776b9826.1678107917.git.stefan@agner.ch>
-References: <d388735d551e09b00317a509859fca51776b9826.1678107917.git.stefan@agner.ch>
-From: Aurelien Jarno <aurelien@aurel32.net>
-Date: Fri, 30 Sep 2022 07:12:36 +0200
-Subject: [PATCH] arm64: dts: rockchip: add thermal support to ODROID-M1
-
-Add the thermal nodes for the ODROID-M1.
-
-Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
-Tested-by: Dan Johansen <strit@manjaro.org>
-Link: https://lore.kernel.org/r/20220930051246.391614-4-aurelien@aurel32.net
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts | 6 ++++++
- 1 file changed, 6 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-index b3016437640b..112c65af3f55 100644
---- a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-@@ -409,6 +409,12 @@ &sdmmc0 {
- 	status = "okay";
- };
- 
-+&tsadc {
-+	rockchip,hw-tshut-mode = <1>;
-+	rockchip,hw-tshut-polarity = <0>;
-+	status = "okay";
-+};
-+
- &uart2 {
- 	status = "okay";
- };
--- 
-2.39.2
-

buildroot-external/board/hardkernel/odroid-m1/patches/linux/0003-arm64-dts-rockchip-Add-NOR-flash-to-ODROID-M1.patch

@@ -1,103 +0,0 @@
-From 982bb2beab8e38a7c0a365770be2ad9c5221a650 Mon Sep 17 00:00:00 2001
-Message-Id: <982bb2beab8e38a7c0a365770be2ad9c5221a650.1678107917.git.stefan@agner.ch>
-In-Reply-To: <d388735d551e09b00317a509859fca51776b9826.1678107917.git.stefan@agner.ch>
-References: <d388735d551e09b00317a509859fca51776b9826.1678107917.git.stefan@agner.ch>
-From: Aurelien Jarno <aurelien@aurel32.net>
-Date: Fri, 30 Sep 2022 07:12:37 +0200
-Subject: [PATCH] arm64: dts: rockchip: Add NOR flash to ODROID-M1
-
-Enable the Rockchip Serial Flash Controller for the ODROID-M1 and add
-the corresponding SPI NOR flash entry. The SFC is used in dual I/O mode
-and not quad I/O mode, as the FSPI_D2 pin is shared with the EMMC_RSTn
-pin.
-
-The partitions addresses and sizes are taken from the ODROID-M1
-Partition Table page on the ODROID wiki.
-
-Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
-Tested-by: Dan Johansen <strit@manjaro.org>
-Link: https://lore.kernel.org/r/20220930051246.391614-5-aurelien@aurel32.net
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- .../boot/dts/rockchip/rk3568-odroid-m1.dts    | 58 +++++++++++++++++++
- 1 file changed, 58 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-index 112c65af3f55..94e839c9afab 100644
---- a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-@@ -351,6 +351,20 @@ rgmii_phy0: ethernet-phy@0 {
- };
- 
- &pinctrl {
-+	fspi {
-+		fspi_dual_io_pins: fspi-dual-io-pins {
-+			rockchip,pins =
-+				/* fspi_clk */
-+				<1 RK_PD0 1 &pcfg_pull_none>,
-+				/* fspi_cs0n */
-+				<1 RK_PD3 1 &pcfg_pull_none>,
-+				/* fspi_d0 */
-+				<1 RK_PD1 1 &pcfg_pull_none>,
-+				/* fspi_d1 */
-+				<1 RK_PD2 1 &pcfg_pull_none>;
-+		};
-+	};
-+
- 	leds {
- 		led_power_pin: led-power-pin {
- 			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
-@@ -409,6 +423,50 @@ &sdmmc0 {
- 	status = "okay";
- };
- 
-+&sfc {
-+	/* Dual I/O mode as the D2 pin conflicts with the eMMC */
-+	pinctrl-0 = <&fspi_dual_io_pins>;
-+	pinctrl-names = "default";
-+	#address-cells = <1>;
-+	#size-cells = <0>;
-+	status = "okay";
-+
-+	flash@0 {
-+		compatible = "jedec,spi-nor";
-+		reg = <0>;
-+		spi-max-frequency = <100000000>;
-+		spi-rx-bus-width = <2>;
-+		spi-tx-bus-width = <1>;
-+
-+		partitions {
-+			compatible = "fixed-partitions";
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+
-+			partition@0 {
-+				label = "SPL";
-+				reg = <0x0 0xe0000>;
-+			};
-+			partition@e0000 {
-+				label = "U-Boot Env";
-+				reg = <0xe0000 0x20000>;
-+			};
-+			partition@100000 {
-+				label = "U-Boot";
-+				reg = <0x100000 0x200000>;
-+			};
-+			partition@300000 {
-+				label = "splash";
-+				reg = <0x300000 0x100000>;
-+			};
-+			partition@400000 {
-+				label = "Filesystem";
-+				reg = <0x400000 0xc00000>;
-+			};
-+		};
-+	};
-+};
-+
- &tsadc {
- 	rockchip,hw-tshut-mode = <1>;
- 	rockchip,hw-tshut-polarity = <0>;
--- 
-2.39.2
-

buildroot-external/board/hardkernel/odroid-m1/patches/linux/0004-arm64-dts-rockchip-Add-analog-audio-on-ODROID-M1.patch

@@ -1,102 +0,0 @@
-From ae25f92a09abb7dd16a9ad3b74e0c105b385f214 Mon Sep 17 00:00:00 2001
-Message-Id: <ae25f92a09abb7dd16a9ad3b74e0c105b385f214.1678107917.git.stefan@agner.ch>
-In-Reply-To: <d388735d551e09b00317a509859fca51776b9826.1678107917.git.stefan@agner.ch>
-References: <d388735d551e09b00317a509859fca51776b9826.1678107917.git.stefan@agner.ch>
-From: Aurelien Jarno <aurelien@aurel32.net>
-Date: Fri, 30 Sep 2022 07:12:38 +0200
-Subject: [PATCH] arm64: dts: rockchip: Add analog audio on ODROID-M1
-
-On the ODROID-M1, the I2S1 TDM controller is connected to the rk809
-codec in I2S mode. It is used to provide a stereo headphones output and
-a mono speaker output. A GPIO with an external pullup is used as an
-headphone detection input.
-
-Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
-Tested-by: Dan Johansen <strit@manjaro.org>
-Link: https://lore.kernel.org/r/20220930051246.391614-6-aurelien@aurel32.net
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- .../boot/dts/rockchip/rk3568-odroid-m1.dts    | 43 ++++++++++++++++++-
- 1 file changed, 42 insertions(+), 1 deletion(-)
-
-diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-index 94e839c9afab..634c1bd80b4e 100644
---- a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-@@ -59,6 +59,31 @@ led_work: led-1 {
- 		};
- 	};
- 
-+	rk809-sound {
-+		compatible = "simple-audio-card";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&hp_det_pin>;
-+		simple-audio-card,name = "Analog RK817";
-+		simple-audio-card,format = "i2s";
-+		simple-audio-card,hp-det-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
-+		simple-audio-card,mclk-fs = <256>;
-+		simple-audio-card,widgets =
-+			"Headphone", "Headphones",
-+			"Speaker", "Speaker";
-+		simple-audio-card,routing =
-+			"Headphones", "HPOL",
-+			"Headphones", "HPOR",
-+			"Speaker", "SPKO";
-+
-+		simple-audio-card,cpu {
-+			sound-dai = <&i2s1_8ch>;
-+		};
-+
-+		simple-audio-card,codec {
-+			sound-dai = <&rk809>;
-+		};
-+	};
-+
- 	vcc3v3_sys: vcc3v3-sys-regulator {
- 		compatible = "regulator-fixed";
- 		regulator-name = "vcc3v3_sys";
-@@ -131,10 +156,15 @@ rk809: pmic@20 {
- 		reg = <0x20>;
- 		interrupt-parent = <&gpio0>;
- 		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
-+		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
-+		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
- 		#clock-cells = <1>;
-+		clock-names = "mclk";
-+		clocks = <&cru I2S1_MCLKOUT_TX>;
- 		pinctrl-names = "default";
--		pinctrl-0 = <&pmic_int_l>;
-+		pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>;
- 		rockchip,system-power-controller;
-+		#sound-dai-cells = <0>;
- 		vcc1-supply = <&vcc3v3_sys>;
- 		vcc2-supply = <&vcc3v3_sys>;
- 		vcc3-supply = <&vcc3v3_sys>;
-@@ -340,6 +370,11 @@ regulator-state-mem {
- 	};
- };
- 
-+&i2s1_8ch {
-+	rockchip,trcm-sync-tx-only;
-+	status = "okay";
-+};
-+
- &mdio0 {
- 	rgmii_phy0: ethernet-phy@0 {
- 		compatible = "ethernet-phy-ieee802.3-c22";
-@@ -379,6 +414,12 @@ pmic_int_l: pmic-int-l {
- 			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
- 		};
- 	};
-+
-+	rk809 {
-+		hp_det_pin: hp-det-pin {
-+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+	};
- };
- 
- &pmu_io_domains {
--- 
-2.39.2
-

buildroot-external/board/hardkernel/odroid-m1/patches/linux/0005-arm64-dts-rockchip-Enable-vop2-and-hdmi-tx-on-ODROID.patch

@@ -1,97 +0,0 @@
-From 3a1be3d8719ef6335385d4e5e456371e7bf7383f Mon Sep 17 00:00:00 2001
-Message-Id: <3a1be3d8719ef6335385d4e5e456371e7bf7383f.1678107917.git.stefan@agner.ch>
-In-Reply-To: <d388735d551e09b00317a509859fca51776b9826.1678107917.git.stefan@agner.ch>
-References: <d388735d551e09b00317a509859fca51776b9826.1678107917.git.stefan@agner.ch>
-From: Aurelien Jarno <aurelien@aurel32.net>
-Date: Fri, 30 Sep 2022 07:12:39 +0200
-Subject: [PATCH] arm64: dts: rockchip: Enable vop2 and hdmi tx on ODROID-M1
-
-Enable the RK356x Video Output Processor (VOP) 2 on ODROID M1.
-
-Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
-Tested-by: Dan Johansen <strit@manjaro.org>
-Link: https://lore.kernel.org/r/20220930051246.391614-7-aurelien@aurel32.net
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- .../boot/dts/rockchip/rk3568-odroid-m1.dts    | 47 +++++++++++++++++++
- 1 file changed, 47 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-index 634c1bd80b4e..126b893048fe 100644
---- a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-@@ -8,6 +8,7 @@
- #include <dt-bindings/gpio/gpio.h>
- #include <dt-bindings/leds/common.h>
- #include <dt-bindings/pinctrl/rockchip.h>
-+#include <dt-bindings/soc/rockchip,vop2.h>
- #include "rk3568.dtsi"
- 
- / {
-@@ -37,6 +38,17 @@ dc_12v: dc-12v-regulator {
- 		regulator-max-microvolt = <12000000>;
- 	};
- 
-+	hdmi-con {
-+		compatible = "hdmi-connector";
-+		type = "a";
-+
-+		port {
-+			hdmi_con_in: endpoint {
-+				remote-endpoint = <&hdmi_out_con>;
-+			};
-+		};
-+	};
-+
- 	leds {
- 		compatible = "gpio-leds";
- 
-@@ -131,6 +143,24 @@ &gmac0_rgmii_clk
- 	rx_delay = <0x2d>;
- };
- 
-+&hdmi {
-+	avdd-0v9-supply = <&vdda0v9_image>;
-+	avdd-1v8-supply = <&vcca1v8_image>;
-+	status = "okay";
-+};
-+
-+&hdmi_in {
-+	hdmi_in_vp0: endpoint {
-+		remote-endpoint = <&vp0_out_hdmi>;
-+	};
-+};
-+
-+&hdmi_out {
-+	hdmi_out_con: endpoint {
-+		remote-endpoint = <&hdmi_con_in>;
-+	};
-+};
-+
- &i2c0 {
- 	status = "okay";
- 
-@@ -517,3 +547,20 @@ &tsadc {
- &uart2 {
- 	status = "okay";
- };
-+
-+&vop {
-+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
-+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
-+	status = "okay";
-+};
-+
-+&vop_mmu {
-+	status = "okay";
-+};
-+
-+&vp0 {
-+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
-+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
-+		remote-endpoint = <&hdmi_in_vp0>;
-+	};
-+};
--- 
-2.39.2
-

buildroot-external/board/hardkernel/odroid-m1/patches/linux/0006-arm64-dts-rockchip-Enable-HDMI-audio-on-ODROID-M1.patch

@@ -1,48 +0,0 @@
-From ded87dc761951205b8b9ba8ee4081e28a850a3db Mon Sep 17 00:00:00 2001
-Message-Id: <ded87dc761951205b8b9ba8ee4081e28a850a3db.1678107917.git.stefan@agner.ch>
-In-Reply-To: <d388735d551e09b00317a509859fca51776b9826.1678107917.git.stefan@agner.ch>
-References: <d388735d551e09b00317a509859fca51776b9826.1678107917.git.stefan@agner.ch>
-From: Aurelien Jarno <aurelien@aurel32.net>
-Date: Fri, 30 Sep 2022 07:12:40 +0200
-Subject: [PATCH] arm64: dts: rockchip: Enable HDMI audio on ODROID-M1.
-
-This enables the i2s0 controller and the hdmi-sound node on the
-ODROID-M1.
-
-Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
-Tested-by: Dan Johansen <strit@manjaro.org>
-Link: https://lore.kernel.org/r/20220930051246.391614-8-aurelien@aurel32.net
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-index 126b893048fe..ac4e94d18feb 100644
---- a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-@@ -161,6 +161,10 @@ hdmi_out_con: endpoint {
- 	};
- };
- 
-+&hdmi_sound {
-+	status = "okay";
-+};
-+
- &i2c0 {
- 	status = "okay";
- 
-@@ -400,6 +404,10 @@ regulator-state-mem {
- 	};
- };
- 
-+&i2s0_8ch {
-+	status = "okay";
-+};
-+
- &i2s1_8ch {
- 	rockchip,trcm-sync-tx-only;
- 	status = "okay";
--- 
-2.39.2
-

buildroot-external/board/hardkernel/odroid-m1/patches/linux/0007-arm64-dts-rockchip-Enable-the-GPU-on-ODROID-M1.patch

@@ -1,37 +0,0 @@
-From 13438a717627cae086cc3a1126552cffa2f4bd16 Mon Sep 17 00:00:00 2001
-Message-Id: <13438a717627cae086cc3a1126552cffa2f4bd16.1678107917.git.stefan@agner.ch>
-In-Reply-To: <d388735d551e09b00317a509859fca51776b9826.1678107917.git.stefan@agner.ch>
-References: <d388735d551e09b00317a509859fca51776b9826.1678107917.git.stefan@agner.ch>
-From: Aurelien Jarno <aurelien@aurel32.net>
-Date: Fri, 30 Sep 2022 07:12:41 +0200
-Subject: [PATCH] arm64: dts: rockchip: Enable the GPU on ODROID-M1
-
-Enable the GPU core on the Rockchip RK3568 ODROID-M1.
-
-Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
-Tested-by: Dan Johansen <strit@manjaro.org>
-Link: https://lore.kernel.org/r/20220930051246.391614-9-aurelien@aurel32.net
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts | 5 +++++
- 1 file changed, 5 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-index ac4e94d18feb..e4b7699d3eea 100644
---- a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-@@ -143,6 +143,11 @@ &gmac0_rgmii_clk
- 	rx_delay = <0x2d>;
- };
- 
-+&gpu {
-+	mali-supply = <&vdd_gpu>;
-+	status = "okay";
-+};
-+
- &hdmi {
- 	avdd-0v9-supply = <&vdda0v9_image>;
- 	avdd-1v8-supply = <&vcca1v8_image>;
--- 
-2.39.2
-

buildroot-external/board/hardkernel/odroid-m1/patches/linux/0008-arm64-dts-rockchip-Enable-the-USB-2.0-ports-on-ODROI.patch

@@ -1,111 +0,0 @@
-From 0f0a85a289b4d0fbd5c39eb5ddbb681a37ad490c Mon Sep 17 00:00:00 2001
-Message-Id: <0f0a85a289b4d0fbd5c39eb5ddbb681a37ad490c.1678107917.git.stefan@agner.ch>
-In-Reply-To: <d388735d551e09b00317a509859fca51776b9826.1678107917.git.stefan@agner.ch>
-References: <d388735d551e09b00317a509859fca51776b9826.1678107917.git.stefan@agner.ch>
-From: Aurelien Jarno <aurelien@aurel32.net>
-Date: Fri, 30 Sep 2022 07:12:42 +0200
-Subject: [PATCH] arm64: dts: rockchip: Enable the USB 2.0 ports on ODROID-M1
-
-The Rockchip RK3568 has two USB OHCI/EHCI controllers connected to a PHY
-providing one host-only port and one OTG port. On the ODROID-M1, they
-are both used in host mode. The USB ports are powered by a DC/DC
-converter providing 5V and named VCC5V0_SYS on the schematics, followed
-by a power switch.
-
-Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
-Tested-by: Dan Johansen <strit@manjaro.org>
-Link: https://lore.kernel.org/r/20220930051246.391614-10-aurelien@aurel32.net
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- .../boot/dts/rockchip/rk3568-odroid-m1.dts    | 61 +++++++++++++++++++
- 1 file changed, 61 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-index e4b7699d3eea..2e4cc20bd676 100644
---- a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-@@ -105,6 +105,28 @@ vcc3v3_sys: vcc3v3-sys-regulator {
- 		regulator-max-microvolt = <3300000>;
- 		vin-supply = <&dc_12v>;
- 	};
-+
-+	vcc5v0_sys: vcc5v0-sys-regulator {
-+		compatible = "regulator-fixed";
-+		regulator-name = "vcc5v0_sys";
-+		regulator-always-on;
-+		regulator-boot-on;
-+		regulator-min-microvolt = <5000000>;
-+		regulator-max-microvolt = <5000000>;
-+		vin-supply = <&dc_12v>;
-+	};
-+
-+	vcc5v0_usb_host: vcc5v0-usb-host-regulator {
-+		compatible = "regulator-fixed";
-+		regulator-name = "vcc5v0_usb_host";
-+		enable-active-high;
-+		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&vcc5v0_usb_host_en_pin>;
-+		regulator-min-microvolt = <5000000>;
-+		regulator-max-microvolt = <5000000>;
-+		vin-supply = <&vcc5v0_sys>;
-+	};
- };
- 
- &cpu0 {
-@@ -463,6 +485,15 @@ hp_det_pin: hp-det-pin {
- 			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
- 		};
- 	};
-+
-+	usb {
-+		vcc5v0_usb_host_en_pin: vcc5v0-usb-host-en-pin {
-+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+		vcc5v0_usb_otg_en_pin: vcc5v0-usb-otg-en-pin {
-+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+	};
- };
- 
- &pmu_io_domains {
-@@ -561,6 +592,36 @@ &uart2 {
- 	status = "okay";
- };
- 
-+&usb_host0_ehci {
-+	status = "okay";
-+};
-+
-+&usb_host0_ohci {
-+	status = "okay";
-+};
-+
-+&usb_host1_ehci {
-+	status = "okay";
-+};
-+
-+&usb_host1_ohci {
-+	status = "okay";
-+};
-+
-+&usb2phy1 {
-+	status = "okay";
-+};
-+
-+&usb2phy1_host {
-+	phy-supply = <&vcc5v0_usb_host>;
-+	status = "okay";
-+};
-+
-+&usb2phy1_otg {
-+	phy-supply = <&vcc5v0_usb_host>;
-+	status = "okay";
-+};
-+
- &vop {
- 	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
- 	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
--- 
-2.39.2
-

buildroot-external/board/hardkernel/odroid-m1/patches/linux/0009-arm64-dts-rockchip-Enable-the-USB-3.0-ports-on-ODROI.patch

@@ -1,114 +0,0 @@
-From d8abc451c669a8fd36b31db5cb96ec49da819124 Mon Sep 17 00:00:00 2001
-Message-Id: <d8abc451c669a8fd36b31db5cb96ec49da819124.1678107917.git.stefan@agner.ch>
-In-Reply-To: <d388735d551e09b00317a509859fca51776b9826.1678107917.git.stefan@agner.ch>
-References: <d388735d551e09b00317a509859fca51776b9826.1678107917.git.stefan@agner.ch>
-From: Aurelien Jarno <aurelien@aurel32.net>
-Date: Fri, 30 Sep 2022 07:12:43 +0200
-Subject: [PATCH] arm64: dts: rockchip: Enable the USB 3.0 ports on ODROID-M1
-
-The Rockchip RK3568 has two USB XHCI controllers. The USB 2.0 signals
-are connected to a PHY providing one host-only port and one OTG port.
-The USB 3.0 signals are connected to two USB3.0/PCIE/SATA combo PHY.
-
-The ODROID M1 has 2 type A USB 3.0 connectors, with the USB 3.0 signals
-connected to the two combo PHYs. For the USB 2.0 signals, one connector
-is connected to the host-only PHY and uses the same power switch as the
-USB 2.0 ports. The other connector has its own power switch and is
-connected to the OTG PHY, which is also connected to a device only
-micro-USB connector. The purpose of this micro-USB connector is for
-firmware update using the Rockusb vendor specific USB class. Therefore
-it does not make sense to enable this port on Linux, and the PHY is
-forced to host mode.
-
-Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
-Tested-by: Dan Johansen <strit@manjaro.org>
-Link: https://lore.kernel.org/r/20220930051246.391614-11-aurelien@aurel32.net
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- .../boot/dts/rockchip/rk3568-odroid-m1.dts    | 49 ++++++++++++++++++-
- 1 file changed, 48 insertions(+), 1 deletion(-)
-
-diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-index 2e4cc20bd676..9a84a7e76d7a 100644
---- a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-@@ -127,6 +127,30 @@ vcc5v0_usb_host: vcc5v0-usb-host-regulator {
- 		regulator-max-microvolt = <5000000>;
- 		vin-supply = <&vcc5v0_sys>;
- 	};
-+
-+	vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
-+		compatible = "regulator-fixed";
-+		regulator-name = "vcc5v0_usb_otg";
-+		enable-active-high;
-+		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&vcc5v0_usb_otg_en_pin>;
-+		regulator-min-microvolt = <5000000>;
-+		regulator-max-microvolt = <5000000>;
-+		vin-supply = <&vcc5v0_sys>;
-+	};
-+};
-+
-+&combphy0 {
-+	/* Used for USB3 */
-+	phy-supply = <&vcc5v0_usb_host>;
-+	status = "okay";
-+};
-+
-+&combphy1 {
-+	/* Used for USB3 */
-+	phy-supply = <&vcc5v0_usb_otg>;
-+	status = "okay";
- };
- 
- &cpu0 {
-@@ -490,7 +514,7 @@ usb {
- 		vcc5v0_usb_host_en_pin: vcc5v0-usb-host-en-pin {
- 			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
- 		};
--		vcc5v0_usb_otg_en_pin: vcc5v0-usb-otg-en-pin {
-+		vcc5v0_usb_otg_en_pin: vcc5v0-usb-dr-en-pin {
- 			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
- 		};
- 	};
-@@ -600,6 +624,11 @@ &usb_host0_ohci {
- 	status = "okay";
- };
- 
-+&usb_host0_xhci {
-+	dr_mode = "host";
-+	status = "okay";
-+};
-+
- &usb_host1_ehci {
- 	status = "okay";
- };
-@@ -608,6 +637,24 @@ &usb_host1_ohci {
- 	status = "okay";
- };
- 
-+&usb_host1_xhci {
-+	status = "okay";
-+};
-+
-+&usb2phy0 {
-+	status = "okay";
-+};
-+
-+&usb2phy0_host {
-+	phy-supply = <&vcc5v0_usb_host>;
-+	status = "okay";
-+};
-+
-+&usb2phy0_otg {
-+	phy-supply = <&vcc5v0_usb_otg>;
-+	status = "okay";
-+};
-+
- &usb2phy1 {
- 	status = "okay";
- };
--- 
-2.39.2
-

buildroot-external/board/hardkernel/odroid-m1/patches/linux/0010-arm64-dts-rockchip-Add-SATA-support-to-ODROID-M1.patch

@@ -1,48 +0,0 @@
-From 2f6d4521403932ca22cb4dabef9033f1d52232ba Mon Sep 17 00:00:00 2001
-Message-Id: <2f6d4521403932ca22cb4dabef9033f1d52232ba.1678107917.git.stefan@agner.ch>
-In-Reply-To: <d388735d551e09b00317a509859fca51776b9826.1678107917.git.stefan@agner.ch>
-References: <d388735d551e09b00317a509859fca51776b9826.1678107917.git.stefan@agner.ch>
-From: Aurelien Jarno <aurelien@aurel32.net>
-Date: Fri, 30 Sep 2022 07:12:44 +0200
-Subject: [PATCH] arm64: dts: rockchip: Add SATA support to ODROID-M1
-
-Enable the Combo PHY and SATA nodes in ODROID-M1.
-
-Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
-Tested-by: Dan Johansen <strit@manjaro.org>
-Link: https://lore.kernel.org/r/20220930051246.391614-12-aurelien@aurel32.net
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-index 9a84a7e76d7a..bd24ccf94e76 100644
---- a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-@@ -153,6 +153,11 @@ &combphy1 {
- 	status = "okay";
- };
- 
-+&combphy2 {
-+	/* used for SATA */
-+	status = "okay";
-+};
-+
- &cpu0 {
- 	cpu-supply = <&vdd_cpu>;
- };
-@@ -538,6 +543,10 @@ &saradc {
- 	status = "okay";
- };
- 
-+&sata2 {
-+	status = "okay";
-+};
-+
- &sdhci {
- 	bus-width = <8>;
- 	max-frequency = <200000000>;
--- 
-2.39.2
-

buildroot-external/board/hardkernel/odroid-m1/patches/linux/0011-arm64-dts-rockchip-Add-PCIEe-v3-nodes-to-ODROID-M1.patch

@@ -1,80 +0,0 @@
-From 1572a9c5d9fa9f654fbc1909528ae5940ad34aa3 Mon Sep 17 00:00:00 2001
-Message-Id: <1572a9c5d9fa9f654fbc1909528ae5940ad34aa3.1678107917.git.stefan@agner.ch>
-In-Reply-To: <d388735d551e09b00317a509859fca51776b9826.1678107917.git.stefan@agner.ch>
-References: <d388735d551e09b00317a509859fca51776b9826.1678107917.git.stefan@agner.ch>
-From: Aurelien Jarno <aurelien@aurel32.net>
-Date: Fri, 30 Sep 2022 07:12:45 +0200
-Subject: [PATCH] arm64: dts: rockchip: Add PCIEe v3 nodes to ODROID-M1
-
-Add nodes to ODROID-M1 to support PCIe v3 on the M2 slot.
-
-Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
-Tested-by: Dan Johansen <strit@manjaro.org>
-Link: https://lore.kernel.org/r/20220930051246.391614-13-aurelien@aurel32.net
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- .../boot/dts/rockchip/rk3568-odroid-m1.dts    | 34 +++++++++++++++++++
- 1 file changed, 34 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-index bd24ccf94e76..2f685c606bb9 100644
---- a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-@@ -96,6 +96,19 @@ simple-audio-card,codec {
- 		};
- 	};
- 
-+	vcc3v3_pcie: vcc3v3-pcie-regulator {
-+		compatible = "regulator-fixed";
-+		regulator-name = "vcc3v3_pcie";
-+		enable-active-high;
-+		gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&vcc3v3_pcie_en_pin>;
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+		startup-delay-us = <5000>;
-+		vin-supply = <&vcc3v3_sys>;
-+	};
-+
- 	vcc3v3_sys: vcc3v3-sys-regulator {
- 		compatible = "regulator-fixed";
- 		regulator-name = "vcc3v3_sys";
-@@ -479,6 +492,18 @@ rgmii_phy0: ethernet-phy@0 {
- 	};
- };
- 
-+&pcie30phy {
-+	status = "okay";
-+};
-+
-+&pcie3x2 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pcie_reset_pin>;
-+	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
-+	vpcie3v3-supply = <&vcc3v3_pcie>;
-+	status = "okay";
-+};
-+
- &pinctrl {
- 	fspi {
- 		fspi_dual_io_pins: fspi-dual-io-pins {
-@@ -503,6 +528,15 @@ led_work_pin: led-work-pin {
- 		};
- 	};
- 
-+	pcie {
-+		pcie_reset_pin: pcie-reset-pin {
-+			rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+		vcc3v3_pcie_en_pin: vcc3v3-pcie-en-pin {
-+			rockchip,pins = <4 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+	};
-+
- 	pmic {
- 		pmic_int_l: pmic-int-l {
- 			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
--- 
-2.39.2
-

buildroot-external/board/hardkernel/odroid-m1/patches/linux/0012-arm64-dts-rockchip-Add-IR-receiver-node-to-ODROID-M1.patch

@@ -1,54 +0,0 @@
-From b2eae73eeb32dd9383571de6af18fc8bd39aac3a Mon Sep 17 00:00:00 2001
-Message-Id: <b2eae73eeb32dd9383571de6af18fc8bd39aac3a.1678107917.git.stefan@agner.ch>
-In-Reply-To: <d388735d551e09b00317a509859fca51776b9826.1678107917.git.stefan@agner.ch>
-References: <d388735d551e09b00317a509859fca51776b9826.1678107917.git.stefan@agner.ch>
-From: Aurelien Jarno <aurelien@aurel32.net>
-Date: Fri, 30 Sep 2022 07:12:46 +0200
-Subject: [PATCH] arm64: dts: rockchip: Add IR receiver node to ODROID-M1
-
-Add the infrared receiver and its associated pinctrl entry. Note that
-there is an external pullup to VCC3V3_SYS.
-
-Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
-Tested-by: Dan Johansen <strit@manjaro.org>
-Link: https://lore.kernel.org/r/20220930051246.391614-14-aurelien@aurel32.net
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts | 14 ++++++++++++++
- 1 file changed, 14 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-index 2f685c606bb9..59ecf868dbd0 100644
---- a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-@@ -49,6 +49,13 @@ hdmi_con_in: endpoint {
- 		};
- 	};
- 
-+	ir-receiver {
-+		compatible = "gpio-ir-receiver";
-+		gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>;
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&ir_receiver_pin>;
-+	};
-+
- 	leds {
- 		compatible = "gpio-leds";
- 
-@@ -519,6 +526,13 @@ fspi_dual_io_pins: fspi-dual-io-pins {
- 		};
- 	};
- 
-+	ir-receiver {
-+		ir_receiver_pin: ir-receiver-pin {
-+			/* external pullup to VCC3V3_SYS */
-+			rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+	};
-+
- 	leds {
- 		led_power_pin: led-power-pin {
- 			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
--- 
-2.39.2
-

buildroot-external/board/hardkernel/odroid-m1/patches/uboot/0001-arm64-dts-rockchip-rk3568-Add-ODROID-M1-board-suppor.patch

@@ -1,899 +0,0 @@
-From 6819a79bdb3c6a63459622e894b8fea9f7f407c5 Mon Sep 17 00:00:00 2001
-Message-Id: <6819a79bdb3c6a63459622e894b8fea9f7f407c5.1678356433.git.stefan@agner.ch>
-From: Stefan Agner <stefan@agner.ch>
-Date: Mon, 6 Mar 2023 10:35:01 +0100
-Subject: [PATCH] arm64: dts: rockchip: rk3568: Add ODROID-M1 board support
-
-Add ODROID-M1 board support. Board device tree rk3568-odroid-m1.dts
-from v6.3-rc1.
-
-Signed-off-by: Stefan Agner <stefan@agner.ch>
----
- arch/arm/dts/Makefile                     |   1 +
- arch/arm/dts/rk3568-odroid-m1-u-boot.dtsi |  28 +
- arch/arm/dts/rk3568-odroid-m1.dts         | 744 ++++++++++++++++++++++
- configs/odroid-m1_defconfig               |  74 +++
- 4 files changed, 847 insertions(+)
- create mode 100644 arch/arm/dts/rk3568-odroid-m1-u-boot.dtsi
- create mode 100644 arch/arm/dts/rk3568-odroid-m1.dts
- create mode 100644 configs/odroid-m1_defconfig
-
-diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
-index c160e884bf..7958922b32 100644
---- a/arch/arm/dts/Makefile
-+++ b/arch/arm/dts/Makefile
-@@ -166,6 +166,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3399) += \
- 
- dtb-$(CONFIG_ROCKCHIP_RK3568) += \
- 	rk3568-evb.dtb \
-+	rk3568-odroid-m1.dts \
- 	rk3566-radxa-cm3-io.dtb \
- 	rk3568-rock-3a.dtb
- 
-diff --git a/arch/arm/dts/rk3568-odroid-m1-u-boot.dtsi b/arch/arm/dts/rk3568-odroid-m1-u-boot.dtsi
-new file mode 100644
-index 0000000000..83fa66d591
---- /dev/null
-+++ b/arch/arm/dts/rk3568-odroid-m1-u-boot.dtsi
-@@ -0,0 +1,28 @@
-+// SPDX-License-Identifier: GPL-2.0+
-+/*
-+ * (C) Copyright 2021 Rockchip Electronics Co., Ltd
-+ * (C) Copyright 2023 Akash Gajjar <gajjar04akash@gmail.com>
-+ */
-+
-+#include "rk356x-u-boot.dtsi"
-+
-+/ {
-+	chosen {
-+		stdout-path = &uart2;
-+		u-boot,spl-boot-order = "same-as-spl", &sdhci, &sdmmc0;
-+	};
-+};
-+
-+&sdmmc0 {
-+	status = "okay";
-+};
-+
-+&sdhci {
-+	status = "okay";
-+};
-+
-+&uart2 {
-+	clock-frequency = <24000000>;
-+	bootph-all;
-+	u-boot,dm-pre-reloc;
-+};
-diff --git a/arch/arm/dts/rk3568-odroid-m1.dts b/arch/arm/dts/rk3568-odroid-m1.dts
-new file mode 100644
-index 0000000000..59ecf868db
---- /dev/null
-+++ b/arch/arm/dts/rk3568-odroid-m1.dts
-@@ -0,0 +1,744 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright (c) 2022 Hardkernel Co., Ltd.
-+ *
-+ */
-+
-+/dts-v1/;
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/leds/common.h>
-+#include <dt-bindings/pinctrl/rockchip.h>
-+#include <dt-bindings/soc/rockchip,vop2.h>
-+#include "rk3568.dtsi"
-+
-+/ {
-+	model = "Hardkernel ODROID-M1";
-+	compatible = "rockchip,rk3568-odroid-m1", "rockchip,rk3568";
-+
-+	aliases {
-+		ethernet0 = &gmac0;
-+		i2c0 = &i2c3;
-+		i2c3 = &i2c0;
-+		mmc0 = &sdhci;
-+		mmc1 = &sdmmc0;
-+		serial0 = &uart1;
-+		serial1 = &uart0;
-+	};
-+
-+	chosen {
-+		stdout-path = "serial2:1500000n8";
-+	};
-+
-+	dc_12v: dc-12v-regulator {
-+		compatible = "regulator-fixed";
-+		regulator-name = "dc_12v";
-+		regulator-always-on;
-+		regulator-boot-on;
-+		regulator-min-microvolt = <12000000>;
-+		regulator-max-microvolt = <12000000>;
-+	};
-+
-+	hdmi-con {
-+		compatible = "hdmi-connector";
-+		type = "a";
-+
-+		port {
-+			hdmi_con_in: endpoint {
-+				remote-endpoint = <&hdmi_out_con>;
-+			};
-+		};
-+	};
-+
-+	ir-receiver {
-+		compatible = "gpio-ir-receiver";
-+		gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>;
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&ir_receiver_pin>;
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+
-+		led_power: led-0 {
-+			gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
-+			function = LED_FUNCTION_POWER;
-+			color = <LED_COLOR_ID_RED>;
-+			default-state = "keep";
-+			linux,default-trigger = "default-on";
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&led_power_pin>;
-+		};
-+		led_work: led-1 {
-+			gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
-+			function = LED_FUNCTION_HEARTBEAT;
-+			color = <LED_COLOR_ID_BLUE>;
-+			linux,default-trigger = "heartbeat";
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&led_work_pin>;
-+		};
-+	};
-+
-+	rk809-sound {
-+		compatible = "simple-audio-card";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&hp_det_pin>;
-+		simple-audio-card,name = "Analog RK817";
-+		simple-audio-card,format = "i2s";
-+		simple-audio-card,hp-det-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
-+		simple-audio-card,mclk-fs = <256>;
-+		simple-audio-card,widgets =
-+			"Headphone", "Headphones",
-+			"Speaker", "Speaker";
-+		simple-audio-card,routing =
-+			"Headphones", "HPOL",
-+			"Headphones", "HPOR",
-+			"Speaker", "SPKO";
-+
-+		simple-audio-card,cpu {
-+			sound-dai = <&i2s1_8ch>;
-+		};
-+
-+		simple-audio-card,codec {
-+			sound-dai = <&rk809>;
-+		};
-+	};
-+
-+	vcc3v3_pcie: vcc3v3-pcie-regulator {
-+		compatible = "regulator-fixed";
-+		regulator-name = "vcc3v3_pcie";
-+		enable-active-high;
-+		gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&vcc3v3_pcie_en_pin>;
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+		startup-delay-us = <5000>;
-+		vin-supply = <&vcc3v3_sys>;
-+	};
-+
-+	vcc3v3_sys: vcc3v3-sys-regulator {
-+		compatible = "regulator-fixed";
-+		regulator-name = "vcc3v3_sys";
-+		regulator-always-on;
-+		regulator-boot-on;
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+		vin-supply = <&dc_12v>;
-+	};
-+
-+	vcc5v0_sys: vcc5v0-sys-regulator {
-+		compatible = "regulator-fixed";
-+		regulator-name = "vcc5v0_sys";
-+		regulator-always-on;
-+		regulator-boot-on;
-+		regulator-min-microvolt = <5000000>;
-+		regulator-max-microvolt = <5000000>;
-+		vin-supply = <&dc_12v>;
-+	};
-+
-+	vcc5v0_usb_host: vcc5v0-usb-host-regulator {
-+		compatible = "regulator-fixed";
-+		regulator-name = "vcc5v0_usb_host";
-+		enable-active-high;
-+		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&vcc5v0_usb_host_en_pin>;
-+		regulator-min-microvolt = <5000000>;
-+		regulator-max-microvolt = <5000000>;
-+		vin-supply = <&vcc5v0_sys>;
-+	};
-+
-+	vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
-+		compatible = "regulator-fixed";
-+		regulator-name = "vcc5v0_usb_otg";
-+		enable-active-high;
-+		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&vcc5v0_usb_otg_en_pin>;
-+		regulator-min-microvolt = <5000000>;
-+		regulator-max-microvolt = <5000000>;
-+		vin-supply = <&vcc5v0_sys>;
-+	};
-+};
-+
-+&combphy0 {
-+	/* Used for USB3 */
-+	phy-supply = <&vcc5v0_usb_host>;
-+	status = "okay";
-+};
-+
-+&combphy1 {
-+	/* Used for USB3 */
-+	phy-supply = <&vcc5v0_usb_otg>;
-+	status = "okay";
-+};
-+
-+&combphy2 {
-+	/* used for SATA */
-+	status = "okay";
-+};
-+
-+&cpu0 {
-+	cpu-supply = <&vdd_cpu>;
-+};
-+
-+&cpu1 {
-+	cpu-supply = <&vdd_cpu>;
-+};
-+
-+&cpu2 {
-+	cpu-supply = <&vdd_cpu>;
-+};
-+
-+&cpu3 {
-+	cpu-supply = <&vdd_cpu>;
-+};
-+
-+&gmac0 {
-+	assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
-+	assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>;
-+	assigned-clock-rates = <0>, <125000000>;
-+	clock_in_out = "output";
-+	phy-handle = <&rgmii_phy0>;
-+	phy-mode = "rgmii";
-+	phy-supply = <&vcc3v3_sys>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&gmac0_miim
-+		     &gmac0_tx_bus2
-+		     &gmac0_rx_bus2
-+		     &gmac0_rgmii_clk
-+		     &gmac0_rgmii_bus>;
-+	status = "okay";
-+
-+	tx_delay = <0x4f>;
-+	rx_delay = <0x2d>;
-+};
-+
-+&gpu {
-+	mali-supply = <&vdd_gpu>;
-+	status = "okay";
-+};
-+
-+&hdmi {
-+	avdd-0v9-supply = <&vdda0v9_image>;
-+	avdd-1v8-supply = <&vcca1v8_image>;
-+	status = "okay";
-+};
-+
-+&hdmi_in {
-+	hdmi_in_vp0: endpoint {
-+		remote-endpoint = <&vp0_out_hdmi>;
-+	};
-+};
-+
-+&hdmi_out {
-+	hdmi_out_con: endpoint {
-+		remote-endpoint = <&hdmi_con_in>;
-+	};
-+};
-+
-+&hdmi_sound {
-+	status = "okay";
-+};
-+
-+&i2c0 {
-+	status = "okay";
-+
-+	vdd_cpu: regulator@1c {
-+		compatible = "tcs,tcs4525";
-+		reg = <0x1c>;
-+		fcs,suspend-voltage-selector = <1>;
-+		regulator-name = "vdd_cpu";
-+		regulator-always-on;
-+		regulator-boot-on;
-+		regulator-min-microvolt = <800000>;
-+		regulator-max-microvolt = <1150000>;
-+		regulator-ramp-delay = <2300>;
-+		vin-supply = <&vcc3v3_sys>;
-+
-+		regulator-state-mem {
-+			regulator-off-in-suspend;
-+		};
-+	};
-+
-+	rk809: pmic@20 {
-+		compatible = "rockchip,rk809";
-+		reg = <0x20>;
-+		interrupt-parent = <&gpio0>;
-+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
-+		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
-+		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
-+		#clock-cells = <1>;
-+		clock-names = "mclk";
-+		clocks = <&cru I2S1_MCLKOUT_TX>;
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>;
-+		rockchip,system-power-controller;
-+		#sound-dai-cells = <0>;
-+		vcc1-supply = <&vcc3v3_sys>;
-+		vcc2-supply = <&vcc3v3_sys>;
-+		vcc3-supply = <&vcc3v3_sys>;
-+		vcc4-supply = <&vcc3v3_sys>;
-+		vcc5-supply = <&vcc3v3_sys>;
-+		vcc6-supply = <&vcc3v3_sys>;
-+		vcc7-supply = <&vcc3v3_sys>;
-+		vcc8-supply = <&vcc3v3_sys>;
-+		vcc9-supply = <&vcc3v3_sys>;
-+		wakeup-source;
-+
-+		regulators {
-+			vdd_logic: DCDC_REG1 {
-+				regulator-name = "vdd_logic";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-init-microvolt = <900000>;
-+				regulator-initial-mode = <0x2>;
-+				regulator-min-microvolt = <500000>;
-+				regulator-max-microvolt = <1350000>;
-+				regulator-ramp-delay = <6001>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vdd_gpu: DCDC_REG2 {
-+				regulator-name = "vdd_gpu";
-+				regulator-always-on;
-+				regulator-init-microvolt = <900000>;
-+				regulator-initial-mode = <0x2>;
-+				regulator-min-microvolt = <500000>;
-+				regulator-max-microvolt = <1350000>;
-+				regulator-ramp-delay = <6001>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vcc_ddr: DCDC_REG3 {
-+				regulator-name = "vcc_ddr";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-initial-mode = <0x2>;
-+
-+				regulator-state-mem {
-+					regulator-on-in-suspend;
-+				};
-+			};
-+
-+			vdd_npu: DCDC_REG4 {
-+				regulator-name = "vdd_npu";
-+				regulator-init-microvolt = <900000>;
-+				regulator-initial-mode = <0x2>;
-+				regulator-min-microvolt = <500000>;
-+				regulator-max-microvolt = <1350000>;
-+				regulator-ramp-delay = <6001>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vcc_1v8: DCDC_REG5 {
-+				regulator-name = "vcc_1v8";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <1800000>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vdda0v9_image: LDO_REG1 {
-+				regulator-name = "vdda0v9_image";
-+				regulator-always-on;
-+				regulator-min-microvolt = <900000>;
-+				regulator-max-microvolt = <900000>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vdda_0v9: LDO_REG2 {
-+				regulator-name = "vdda_0v9";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <900000>;
-+				regulator-max-microvolt = <900000>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vdda0v9_pmu: LDO_REG3 {
-+				regulator-name = "vdda0v9_pmu";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <900000>;
-+				regulator-max-microvolt = <900000>;
-+
-+				regulator-state-mem {
-+					regulator-on-in-suspend;
-+					regulator-suspend-microvolt = <900000>;
-+				};
-+			};
-+
-+			vccio_acodec: LDO_REG4 {
-+				regulator-name = "vccio_acodec";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <3300000>;
-+				regulator-max-microvolt = <3300000>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vccio_sd: LDO_REG5 {
-+				regulator-name = "vccio_sd";
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <3300000>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vcc3v3_pmu: LDO_REG6 {
-+				regulator-name = "vcc3v3_pmu";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <3300000>;
-+				regulator-max-microvolt = <3300000>;
-+
-+				regulator-state-mem {
-+					regulator-on-in-suspend;
-+					regulator-suspend-microvolt = <3300000>;
-+				};
-+			};
-+
-+			vcca_1v8: LDO_REG7 {
-+				regulator-name = "vcca_1v8";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <1800000>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vcca1v8_pmu: LDO_REG8 {
-+				regulator-name = "vcca1v8_pmu";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <1800000>;
-+
-+				regulator-state-mem {
-+					regulator-on-in-suspend;
-+					regulator-suspend-microvolt = <1800000>;
-+				};
-+			};
-+
-+			vcca1v8_image: LDO_REG9 {
-+				regulator-name = "vcca1v8_image";
-+				regulator-always-on;
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <1800000>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vcc_3v3: SWITCH_REG1 {
-+				regulator-name = "vcc_3v3";
-+				regulator-always-on;
-+				regulator-boot-on;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vcc3v3_sd: SWITCH_REG2 {
-+				regulator-name = "vcc3v3_sd";
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+		};
-+	};
-+};
-+
-+&i2s0_8ch {
-+	status = "okay";
-+};
-+
-+&i2s1_8ch {
-+	rockchip,trcm-sync-tx-only;
-+	status = "okay";
-+};
-+
-+&mdio0 {
-+	rgmii_phy0: ethernet-phy@0 {
-+		compatible = "ethernet-phy-ieee802.3-c22";
-+		reg = <0x0>;
-+		reset-assert-us = <20000>;
-+		reset-deassert-us = <100000>;
-+		reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
-+	};
-+};
-+
-+&pcie30phy {
-+	status = "okay";
-+};
-+
-+&pcie3x2 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pcie_reset_pin>;
-+	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
-+	vpcie3v3-supply = <&vcc3v3_pcie>;
-+	status = "okay";
-+};
-+
-+&pinctrl {
-+	fspi {
-+		fspi_dual_io_pins: fspi-dual-io-pins {
-+			rockchip,pins =
-+				/* fspi_clk */
-+				<1 RK_PD0 1 &pcfg_pull_none>,
-+				/* fspi_cs0n */
-+				<1 RK_PD3 1 &pcfg_pull_none>,
-+				/* fspi_d0 */
-+				<1 RK_PD1 1 &pcfg_pull_none>,
-+				/* fspi_d1 */
-+				<1 RK_PD2 1 &pcfg_pull_none>;
-+		};
-+	};
-+
-+	ir-receiver {
-+		ir_receiver_pin: ir-receiver-pin {
-+			/* external pullup to VCC3V3_SYS */
-+			rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+	};
-+
-+	leds {
-+		led_power_pin: led-power-pin {
-+			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+		led_work_pin: led-work-pin {
-+			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+	};
-+
-+	pcie {
-+		pcie_reset_pin: pcie-reset-pin {
-+			rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+		vcc3v3_pcie_en_pin: vcc3v3-pcie-en-pin {
-+			rockchip,pins = <4 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+	};
-+
-+	pmic {
-+		pmic_int_l: pmic-int-l {
-+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
-+		};
-+	};
-+
-+	rk809 {
-+		hp_det_pin: hp-det-pin {
-+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+	};
-+
-+	usb {
-+		vcc5v0_usb_host_en_pin: vcc5v0-usb-host-en-pin {
-+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+		vcc5v0_usb_otg_en_pin: vcc5v0-usb-dr-en-pin {
-+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+	};
-+};
-+
-+&pmu_io_domains {
-+	pmuio1-supply = <&vcc3v3_pmu>;
-+	pmuio2-supply = <&vcc3v3_pmu>;
-+	vccio1-supply = <&vccio_acodec>;
-+	vccio2-supply = <&vcc_1v8>;
-+	vccio3-supply = <&vccio_sd>;
-+	vccio4-supply = <&vcc_1v8>;
-+	vccio5-supply = <&vcc_3v3>;
-+	vccio6-supply = <&vcc_3v3>;
-+	vccio7-supply = <&vcc_3v3>;
-+	status = "okay";
-+};
-+
-+&saradc {
-+	vref-supply = <&vcca_1v8>;
-+	status = "okay";
-+};
-+
-+&sata2 {
-+	status = "okay";
-+};
-+
-+&sdhci {
-+	bus-width = <8>;
-+	max-frequency = <200000000>;
-+	non-removable;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe &emmc_rstnout>;
-+	vmmc-supply = <&vcc_3v3>;
-+	vqmmc-supply = <&vcc_1v8>;
-+	status = "okay";
-+};
-+
-+&sdmmc0 {
-+	bus-width = <4>;
-+	cap-sd-highspeed;
-+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
-+	disable-wp;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
-+	sd-uhs-sdr50;
-+	vmmc-supply = <&vcc3v3_sd>;
-+	vqmmc-supply = <&vccio_sd>;
-+	status = "okay";
-+};
-+
-+&sfc {
-+	/* Dual I/O mode as the D2 pin conflicts with the eMMC */
-+	pinctrl-0 = <&fspi_dual_io_pins>;
-+	pinctrl-names = "default";
-+	#address-cells = <1>;
-+	#size-cells = <0>;
-+	status = "okay";
-+
-+	flash@0 {
-+		compatible = "jedec,spi-nor";
-+		reg = <0>;
-+		spi-max-frequency = <100000000>;
-+		spi-rx-bus-width = <2>;
-+		spi-tx-bus-width = <1>;
-+
-+		partitions {
-+			compatible = "fixed-partitions";
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+
-+			partition@0 {
-+				label = "SPL";
-+				reg = <0x0 0xe0000>;
-+			};
-+			partition@e0000 {
-+				label = "U-Boot Env";
-+				reg = <0xe0000 0x20000>;
-+			};
-+			partition@100000 {
-+				label = "U-Boot";
-+				reg = <0x100000 0x200000>;
-+			};
-+			partition@300000 {
-+				label = "splash";
-+				reg = <0x300000 0x100000>;
-+			};
-+			partition@400000 {
-+				label = "Filesystem";
-+				reg = <0x400000 0xc00000>;
-+			};
-+		};
-+	};
-+};
-+
-+&tsadc {
-+	rockchip,hw-tshut-mode = <1>;
-+	rockchip,hw-tshut-polarity = <0>;
-+	status = "okay";
-+};
-+
-+&uart2 {
-+	status = "okay";
-+};
-+
-+&usb_host0_ehci {
-+	status = "okay";
-+};
-+
-+&usb_host0_ohci {
-+	status = "okay";
-+};
-+
-+&usb_host0_xhci {
-+	dr_mode = "host";
-+	status = "okay";
-+};
-+
-+&usb_host1_ehci {
-+	status = "okay";
-+};
-+
-+&usb_host1_ohci {
-+	status = "okay";
-+};
-+
-+&usb_host1_xhci {
-+	status = "okay";
-+};
-+
-+&usb2phy0 {
-+	status = "okay";
-+};
-+
-+&usb2phy0_host {
-+	phy-supply = <&vcc5v0_usb_host>;
-+	status = "okay";
-+};
-+
-+&usb2phy0_otg {
-+	phy-supply = <&vcc5v0_usb_otg>;
-+	status = "okay";
-+};
-+
-+&usb2phy1 {
-+	status = "okay";
-+};
-+
-+&usb2phy1_host {
-+	phy-supply = <&vcc5v0_usb_host>;
-+	status = "okay";
-+};
-+
-+&usb2phy1_otg {
-+	phy-supply = <&vcc5v0_usb_host>;
-+	status = "okay";
-+};
-+
-+&vop {
-+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
-+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
-+	status = "okay";
-+};
-+
-+&vop_mmu {
-+	status = "okay";
-+};
-+
-+&vp0 {
-+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
-+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
-+		remote-endpoint = <&hdmi_in_vp0>;
-+	};
-+};
-diff --git a/configs/odroid-m1_defconfig b/configs/odroid-m1_defconfig
-new file mode 100644
-index 0000000000..82cceec01b
---- /dev/null
-+++ b/configs/odroid-m1_defconfig
-@@ -0,0 +1,74 @@
-+CONFIG_ARM=y
-+CONFIG_SKIP_LOWLEVEL_INIT=y
-+CONFIG_COUNTER_FREQUENCY=24000000
-+CONFIG_ARCH_ROCKCHIP=y
-+CONFIG_TEXT_BASE=0x00a00000
-+CONFIG_SPL_LIBCOMMON_SUPPORT=y
-+CONFIG_SPL_LIBGENERIC_SUPPORT=y
-+CONFIG_NR_DRAM_BANKS=2
-+CONFIG_DEFAULT_DEVICE_TREE="rk3568-odroid-m1"
-+CONFIG_ROCKCHIP_RK3568=y
-+CONFIG_SPL_ROCKCHIP_BACK_TO_BROM=y
-+CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
-+CONFIG_SPL_MMC=y
-+CONFIG_SPL_SERIAL=y
-+CONFIG_SPL_STACK_R_ADDR=0x600000
-+CONFIG_TARGET_EVB_RK3568=y
-+CONFIG_DEBUG_UART_BASE=0xFE660000
-+CONFIG_DEBUG_UART_CLOCK=24000000
-+CONFIG_SYS_LOAD_ADDR=0xc00800
-+CONFIG_DEBUG_UART=y
-+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
-+CONFIG_FIT=y
-+CONFIG_FIT_VERBOSE=y
-+CONFIG_SPL_LOAD_FIT=y
-+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-odroid-m1.dtb"
-+# CONFIG_DISPLAY_CPUINFO is not set
-+CONFIG_DISPLAY_BOARDINFO_LATE=y
-+CONFIG_SPL_MAX_SIZE=0x20000
-+CONFIG_SPL_PAD_TO=0x7f8000
-+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-+CONFIG_SPL_BSS_START_ADDR=0x4000000
-+CONFIG_SPL_BSS_MAX_SIZE=0x4000
-+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
-+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-+CONFIG_DM_PMIC=y
-+CONFIG_PMIC_RK8XX=y
-+CONFIG_SPL_PMIC_RK8XX=y
-+CONFIG_SPL_STACK=0x400000
-+CONFIG_SPL_STACK_R=y
-+CONFIG_SPL_ATF=y
-+CONFIG_CMD_I2C=y
-+CONFIG_CMD_GPT=y
-+CONFIG_CMD_MMC=y
-+# CONFIG_CMD_SETEXPR is not set
-+# CONFIG_SPL_DOS_PARTITION is not set
-+CONFIG_SPL_OF_CONTROL=y
-+CONFIG_OF_LIVE=y
-+CONFIG_NET_RANDOM_ETHADDR=y
-+CONFIG_REGULATOR_RK8XX=y
-+CONFIG_SPL_REGMAP=y
-+CONFIG_SPL_SYSCON=y
-+CONFIG_SPL_CLK=y
-+CONFIG_ROCKCHIP_GPIO=y
-+CONFIG_SYS_I2C_ROCKCHIP=y
-+CONFIG_MISC=y
-+CONFIG_SUPPORT_EMMC_RPMB=y
-+CONFIG_MMC_DW=y
-+CONFIG_MMC_DW_ROCKCHIP=y
-+CONFIG_MMC_SDHCI=y
-+CONFIG_MMC_SDHCI_SDMA=y
-+CONFIG_MMC_SDHCI_ROCKCHIP=y
-+CONFIG_ETH_DESIGNWARE=y
-+CONFIG_GMAC_ROCKCHIP=y
-+CONFIG_REGULATOR_PWM=y
-+CONFIG_PWM_ROCKCHIP=y
-+CONFIG_SPL_RAM=y
-+CONFIG_DM_RESET=y
-+CONFIG_BAUDRATE=1500000
-+CONFIG_DEBUG_UART_SHIFT=2
-+CONFIG_SYS_NS16550_MEM32=y
-+CONFIG_SYSRESET=y
-+# CONFIG_BINMAN_FDT is not set
-+CONFIG_ERRNO_STR=y
--- 
-2.39.2
-

buildroot-external/board/hardkernel/odroid-m1/uboot-boot.ush

@@ -1,98 +0,0 @@
-
-part start mmc ${devnum} hassos-bootstate mmc_env
-
-setenv loadbootstate " \
-    echo 'loading env...'; \
-    mmc read ${ramdisk_addr_r} ${mmc_env} 0x40; \
-    env import -c ${ramdisk_addr_r} 0x8000;"
-
-setenv storebootstate " \
-    echo 'storing env...'; \
-    env export -c -s 0x8000 ${ramdisk_addr_r} BOOT_ORDER BOOT_A_LEFT BOOT_B_LEFT MACHINE_ID; \
-    mmc write ${ramdisk_addr_r} ${mmc_env} 0x40;"
-
-run loadbootstate
-test -n "${BOOT_ORDER}" || setenv BOOT_ORDER "A B"
-test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3
-test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3
-
-# Allows ConditionFirstBoot=
-test -n "${MACHINE_ID}" || setenv BOOT_CONDITION "systemd.condition-first-boot=true"
-
-# HassOS bootargs
-setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 net.naming-scheme=v250 systemd.machine_id=${MACHINE_ID} fsck.repair=yes ${BOOT_CONDITION}"
-
-# HassOS system A/B
-setenv bootargs_a "root=PARTUUID=8d3d53e3-6d49-4c38-8349-aff6859e82fd rootfstype=squashfs ro rootwait"
-setenv bootargs_b "root=PARTUUID=a3ec664e-32ce-4665-95ea-7ae90ce9aa20 rootfstype=squashfs ro rootwait"
-
-part number mmc ${devnum} hassos-boot boot_partnum
-
-# Load environment from haos-config.txt
-if test -e mmc ${devnum}:${boot_partnum} haos-config.txt; then
-  fatload mmc ${devnum}:${boot_partnum} ${ramdisk_addr_r} haos-config.txt
-  env import -t ${ramdisk_addr_r} ${filesize}
-fi
-
-# Load extraargs
-fileenv mmc ${devnum}:${boot_partnum} ${ramdisk_addr_r} cmdline.txt cmdline
-
-# Load device tree
-setenv fdtfile rk3568-odroid-m1.dtb
-echo "Loading standard device tree ${fdtfile}"
-fatload mmc ${devnum}:${boot_partnum} ${fdt_addr_r} ${fdtfile}
-fdt addr ${fdt_addr_r}
-
-# load dt overlays
-fdt resize 65536
-for overlay_file in ${overlays}; do
-  if fatload mmc ${devnum}:${boot_partnum} ${ramdisk_addr_r} overlays/${overlay_file}.dtbo; then
-    echo "Applying kernel provided DT overlay ${overlay_file}.dtbo"
-    fdt apply ${ramdisk_addr_r} || setenv overlay_error "true"
-  fi
-done
-if test "${overlay_error}" = "true"; then
-  echo "Error applying DT overlays, restoring original DT"
-  fatload mmc ${devnum}:${boot_partnum} ${fdt_addr_r} ${fdtfile}
-fi
-
-setenv bootargs
-for BOOT_SLOT in "${BOOT_ORDER}"; do
-  if test "x${bootargs}" != "x"; then
-    # skip remaining slots
-  elif test "x${BOOT_SLOT}" = "xA"; then
-    if test ${BOOT_A_LEFT} -gt 0; then
-      setexpr BOOT_A_LEFT ${BOOT_A_LEFT} - 1
-      echo "Trying to boot slot A, ${BOOT_A_LEFT} attempts remaining. Loading kernel ..."
-      part number mmc ${devnum} hassos-kernel0 kernel_partnum
-      if load mmc ${devnum}:${kernel_partnum} ${kernel_addr_r} Image; then
-          setenv bootargs "${bootargs_hassos} ${bootargs_a} rauc.slot=A ${cmdline}"
-      fi
-    fi
-  elif test "x${BOOT_SLOT}" = "xB"; then
-    if test ${BOOT_B_LEFT} -gt 0; then
-      setexpr BOOT_B_LEFT ${BOOT_B_LEFT} - 1
-      echo "Trying to boot slot B, ${BOOT_B_LEFT} attempts remaining. Loading kernel ..."
-      part number mmc ${devnum} hassos-kernel1 kernel_partnum
-      if load mmc ${devnum}:${kernel_partnum} ${kernel_addr_r} Image; then
-          setenv bootargs "${bootargs_hassos} ${bootargs_b} rauc.slot=B ${cmdline}"
-      fi
-    fi
-  fi
-done
-
-if test -n "${bootargs}"; then
-  run storebootstate
-else
-  echo "No valid slot found, resetting tries to 3"
-  setenv BOOT_A_LEFT 3
-  setenv BOOT_B_LEFT 3
-  run storebootstate
-  reset
-fi
-
-echo "Starting kernel"
-booti ${kernel_addr_r} - ${fdt_addr_r}
-
-echo "Boot failed, resetting..."
-reset

buildroot-external/board/hardkernel/odroid-m1/uboot.config

@@ -1,5 +0,0 @@
-CONFIG_DOS_PARTITION=y
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_USB_STORAGE is not set
-CONFIG_DISPLAY_BOARDINFO=y
-CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y

buildroot-external/board/hardkernel/odroid-n2/meta

@@ -1,12 +1,10 @@
 BOARD_ID=odroid-n2
-BOARD_NAME="Hardkernel ODROID-N2"
+BOARD_NAME="Hardkernel Odroid-N2"
 CHASSIS=embedded
 BOOTLOADER=uboot
 KERNEL_FILE=Image
 BOOT_SYS=mbr
-BOOT_SIZE=24M
 BOOT_SPL=true
-BOOT_SPL_SIZE=8M
 BOOT_ENV_SIZE=0x2000
 SUPERVISOR_MACHINE=odroid-n2
 SUPERVISOR_ARCH=aarch64

buildroot-external/board/hardkernel/odroid-n2/uboot-boot.ush

@@ -18,11 +18,8 @@ test -n "${BOOT_ORDER}" || setenv BOOT_ORDER "A B"
 test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3
 test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3
 
-# Allows ConditionFirstBoot=
-test -n "${MACHINE_ID}" || setenv BOOT_CONDITION "systemd.condition-first-boot=true"
-
 # HassOS bootargs
-setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 net.naming-scheme=v250 systemd.machine_id=${MACHINE_ID} fsck.repair=yes ${BOOT_CONDITION}"
+setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor systemd.machine_id=${MACHINE_ID} cgroup_enable=memory fsck.repair=yes"
 
 # HassOS system A/B
 setenv bootargs_a "root=PARTUUID=48617373-06 rootfstype=squashfs ro rootwait"

buildroot-external/board/hardkernel/odroid-xu4/meta

@@ -1,12 +1,10 @@
 BOARD_ID=odroid-xu4
-BOARD_NAME="Hardkernel ODROID-XU4"
+BOARD_NAME="Hardkernel Odroid-XU4"
 CHASSIS=embedded
 BOOTLOADER=uboot
 KERNEL_FILE=zImage
 BOOT_SYS=mbr
-BOOT_SIZE=24M
 BOOT_SPL=true
-BOOT_SPL_SIZE=8M
 BOOT_ENV_SIZE=0x4000
 SUPERVISOR_MACHINE=odroid-xu
 SUPERVISOR_ARCH=armv7

buildroot-external/board/hardkernel/odroid-xu4/patches/linux/0001-ODROID-XU4-regulator-s2mps11-add-ethernet-power-rese.patch

@@ -1,94 +0,0 @@
-From e7d59e0444170873e945a0675ed1565a65c99e17 Mon Sep 17 00:00:00 2001
-Message-Id: <e7d59e0444170873e945a0675ed1565a65c99e17.1676489173.git.stefan@agner.ch>
-From: memeka <mihailescu2m@gmail.com>
-Date: Fri, 18 Jan 2019 14:36:21 +1030
-Subject: [PATCH] ODROID-XU4: regulator: s2mps11: add ethernet power reset in
- shutdown function
-
-Ethernet device cannot be detected on warm boot sometimes. This patch is
-to add the power reset routines for ethernet device using PMIC. Then
-ethernet device can be reset hardware-wise.
-
-Change-Id: Iffbe2966da7e4679f63b91ab79241167391792df
-Signed-off-by: Brian Kim <brian.kim@hardkernel.com>
-Signed-off-by: Marian Mihailescu <mihailescu2m@gmail.com>
----
- drivers/regulator/s2mps11.c | 55 +++++++++++++++++++++++++++++++++++++
- 1 file changed, 55 insertions(+)
-
-diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c
-index ebc67e3ddd4f..51f128076db9 100644
---- a/drivers/regulator/s2mps11.c
-+++ b/drivers/regulator/s2mps11.c
-@@ -1117,6 +1117,57 @@ static const struct regulator_desc s2mpu02_regulators[] = {
- 	regulator_desc_s2mpu02_buck7(7),
- };
- 
-+static int s2mps11_pmic_ethonoff(struct platform_device *pdev, bool onoff)
-+{
-+	struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
-+	unsigned int reg_val = 0;
-+	int ret = 0;
-+
-+	ret = regmap_read(iodev->regmap_pmic, S2MPS11_REG_L15CTRL, &reg_val);
-+	if (ret) {
-+		dev_err(&pdev->dev, "failed to read S2MPS11_REG_L15CTRL value\n");
-+		return ret;
-+	}
-+
-+	ret = regmap_read(iodev->regmap_pmic, S2MPS11_REG_L17CTRL, &reg_val);
-+	if (ret) {
-+		dev_err(&pdev->dev, "failed to read S2MPS11_REG_L17CTRL value\n");
-+		return ret;
-+	}
-+
-+	if (onoff) {
-+		/* ETH VDD0 ON */
-+		ret = regmap_update_bits(iodev->regmap_pmic, S2MPS11_REG_L15CTRL, 0xFF, 0x72);
-+		if (ret) {
-+			dev_err(&pdev->dev, "cannot update S2MPS11 LDO CTRL15 register\n");
-+			return ret;
-+		}
-+
-+		/* ETH VDD1 ON */
-+		ret = regmap_update_bits(iodev->regmap_pmic, S2MPS11_REG_L17CTRL, 0xFF, 0x72);
-+		if (ret) {
-+			dev_err(&pdev->dev, "cannot update S2MPS11 LDO CTRL17 register\n");
-+			return ret;
-+		}
-+	} else {
-+		/* ETH VDD0 OFF */
-+		ret = regmap_update_bits(iodev->regmap_pmic, S2MPS11_REG_L15CTRL, 0x3F, 0x00);
-+		if (ret) {
-+			dev_err(&pdev->dev, "cannot update S2MPS11 LDO CTRL15 register\n");
-+			return ret;
-+		}
-+
-+		/* ETH VDD1 OFF */
-+		ret = regmap_update_bits(iodev->regmap_pmic, S2MPS11_REG_L17CTRL, 0x3F, 0x00);
-+		if (ret) {
-+			dev_err(&pdev->dev, "cannot update S2MPS11 LDO CTRL17 register\n");
-+			return ret;
-+		}
-+	}
-+
-+	return ret;
-+}
-+
- static int s2mps11_pmic_probe(struct platform_device *pdev)
- {
- 	struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
-@@ -1219,6 +1270,10 @@ static int s2mps11_pmic_probe(struct platform_device *pdev)
- 		}
- 	}
- 
-+	dev_info(&pdev->dev, "Resetting Ethernet\n");
-+	s2mps11_pmic_ethonoff(pdev, false);
-+	mdelay(10);
-+	s2mps11_pmic_ethonoff(pdev, true);
- out:
- 	kfree(rdata);
- 
--- 
-2.39.1
-

buildroot-external/board/hardkernel/odroid-xu4/patches/uboot/0001-samsung-common-ignore-if-CROS-EC-is-not-supported.patch

@@ -1,30 +0,0 @@
-From 24252c65cfea76c5724044381bafb587a9fecd6a Mon Sep 17 00:00:00 2001
-Message-Id: <24252c65cfea76c5724044381bafb587a9fecd6a.1676446297.git.stefan@agner.ch>
-From: Stefan Agner <stefan@agner.ch>
-Date: Wed, 15 Feb 2023 08:30:41 +0100
-Subject: [PATCH] samsung: common: ignore if CROS EC is not supported
-
-If the CROS device class is not compiled in, uclass returns not
-supported. Ignore this case as well.
-
-Signed-off-by: Stefan Agner <stefan@agner.ch>
----
- board/samsung/common/board.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/board/samsung/common/board.c b/board/samsung/common/board.c
-index 16ce5cb892..663d7ca991 100644
---- a/board/samsung/common/board.c
-+++ b/board/samsung/common/board.c
-@@ -223,7 +223,7 @@ int board_late_init(void)
- 	char mmcbootdev_str[16];
- 
- 	ret = uclass_first_device_err(UCLASS_CROS_EC, &dev);
--	if (ret && ret != -ENODEV) {
-+	if (ret && ret != -ENODEV && ret != -EPFNOSUPPORT) {
- 		/* Force console on */
- 		gd->flags &= ~GD_FLG_SILENT;
- 
--- 
-2.39.1
-

buildroot-external/board/hardkernel/odroid-xu4/uboot-boot.ush

@@ -20,11 +20,8 @@ test -n "${BOOT_ORDER}" || setenv BOOT_ORDER "A B"
 test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3
 test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3
 
-# Allows ConditionFirstBoot=
-test -n "${MACHINE_ID}" || setenv BOOT_CONDITION "systemd.condition-first-boot=true"
-
 # HassOS bootargs
-setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 net.naming-scheme=v250 systemd.machine_id=${MACHINE_ID} fsck.repair=yes ${BOOT_CONDITION}"
+setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor systemd.machine_id=${MACHINE_ID} cgroup_enable=memory fsck.repair=yes"
 
 # HassOS system A/B
 setenv bootargs_a "root=PARTUUID=48617373-06 rootfstype=squashfs ro rootwait"

buildroot-external/board/hardkernel/patches/linux/0001-arm64-dts-meson-g12b-add-power-button-support.patch

@@ -1,8 +1,8 @@
-From 86f6a398d2c080f92d51048ededf45efbe3a96d4 Mon Sep 17 00:00:00 2001
-Message-Id: <86f6a398d2c080f92d51048ededf45efbe3a96d4.1676488652.git.stefan@agner.ch>
+From 9f8390a715bc58e7423b65a18c4499761c84b819 Mon Sep 17 00:00:00 2001
+Message-Id: <9f8390a715bc58e7423b65a18c4499761c84b819.1646168061.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Mon, 11 Jan 2021 11:20:48 +0100
-Subject: [PATCH] arm64: dts: meson: g12b: add power button support
+Subject: [PATCH 1/7] arm64: dts: meson: g12b: add power button support
 
 Add power button support on J2 pin 11 (GPIOX_3 on the SoC side). The
 GPIO is low active, e.g. when connecting with pin 9 (GND) a power
@@ -14,7 +14,7 @@ Signed-off-by: Stefan Agner <stefan@agner.ch>
  1 file changed, 11 insertions(+)
 
 diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-index fd3fa82e4c33..06bdba57b04c 100644
+index d33e54b5e196..5f0f036b1265 100644
 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
 +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
 @@ -39,6 +39,17 @@ emmc_pwrseq: emmc-pwrseq {
@@ -36,5 +36,5 @@ index fd3fa82e4c33..06bdba57b04c 100644
  		compatible = "gpio-leds";
  
 -- 
-2.39.1
+2.35.1
 

buildroot-external/board/hardkernel/patches/linux/0002-arm64-dts-meson-g12b-add-GPIO-fan-support.patch

@@ -1,10 +1,10 @@
-From e269c47ef68371dbed1ff5919a67fcc385d8c6da Mon Sep 17 00:00:00 2001
-Message-Id: <e269c47ef68371dbed1ff5919a67fcc385d8c6da.1676488652.git.stefan@agner.ch>
-In-Reply-To: <86f6a398d2c080f92d51048ededf45efbe3a96d4.1676488652.git.stefan@agner.ch>
-References: <86f6a398d2c080f92d51048ededf45efbe3a96d4.1676488652.git.stefan@agner.ch>
+From 26917e25696e7156a85d4dfcc578cb4cf4f42dde Mon Sep 17 00:00:00 2001
+Message-Id: <26917e25696e7156a85d4dfcc578cb4cf4f42dde.1646168061.git.stefan@agner.ch>
+In-Reply-To: <9f8390a715bc58e7423b65a18c4499761c84b819.1646168061.git.stefan@agner.ch>
+References: <9f8390a715bc58e7423b65a18c4499761c84b819.1646168061.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Mon, 11 Jan 2021 11:38:54 +0100
-Subject: [PATCH] arm64: dts: meson: g12b: add GPIO fan support
+Subject: [PATCH 2/7] arm64: dts: meson: g12b: add GPIO fan support
 
 Add simple GPIO fan node to support a fan on GPIO J8. Unfortunately the
 pad used to control the fan does not support real PWM, hence the RPM
@@ -16,7 +16,7 @@ Signed-off-by: Stefan Agner <stefan@agner.ch>
  1 file changed, 11 insertions(+)
 
 diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-index 06bdba57b04c..bcf6d8eacd6e 100644
+index 5f0f036b1265..36dbd2666015 100644
 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
 +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
 @@ -39,6 +39,17 @@ emmc_pwrseq: emmc-pwrseq {
@@ -38,5 +38,5 @@ index 06bdba57b04c..bcf6d8eacd6e 100644
  		compatible = "gpio-keys-polled";
  		poll-interval = <100>;
 -- 
-2.39.1
+2.35.1
 

buildroot-external/board/hardkernel/patches/linux/0003-arm64-dts-meson-g12b-odroid-n2-add-fan-as-cooling-de.patch

@@ -1,10 +1,11 @@
-From 8c3e65cf09d62797a2fe50234f30f33f6e4eda44 Mon Sep 17 00:00:00 2001
-Message-Id: <8c3e65cf09d62797a2fe50234f30f33f6e4eda44.1676488652.git.stefan@agner.ch>
-In-Reply-To: <86f6a398d2c080f92d51048ededf45efbe3a96d4.1676488652.git.stefan@agner.ch>
-References: <86f6a398d2c080f92d51048ededf45efbe3a96d4.1676488652.git.stefan@agner.ch>
+From 5b2b8c960269eba18f0557bf49990b9c28e5e6af Mon Sep 17 00:00:00 2001
+Message-Id: <5b2b8c960269eba18f0557bf49990b9c28e5e6af.1646168061.git.stefan@agner.ch>
+In-Reply-To: <9f8390a715bc58e7423b65a18c4499761c84b819.1646168061.git.stefan@agner.ch>
+References: <9f8390a715bc58e7423b65a18c4499761c84b819.1646168061.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Mon, 11 Jan 2021 15:53:55 +0100
-Subject: [PATCH] arm64: dts: meson: g12b: odroid-n2: add fan as cooling device
+Subject: [PATCH 3/7] arm64: dts: meson: g12b: odroid-n2: add fan as cooling
+ device
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit
@@ -20,10 +21,10 @@ Signed-off-by: Stefan Agner <stefan@agner.ch>
  1 file changed, 38 insertions(+)
 
 diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-index bcf6d8eacd6e..6dcf990e0efc 100644
+index 36dbd2666015..5ca75696bd5c 100644
 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
 +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-@@ -390,6 +390,44 @@ &clkc_audio {
+@@ -388,6 +388,44 @@ &clkc_audio {
  	status = "okay";
  };
  
@@ -69,5 +70,5 @@ index bcf6d8eacd6e..6dcf990e0efc 100644
  	cpu-supply = <&vddcpu_b>;
  	operating-points-v2 = <&cpu_opp_table_0>;
 -- 
-2.39.1
+2.35.1
 

buildroot-external/board/hardkernel/patches/linux/0004-arm64-dts-meson-add-uart_A-node.patch

@@ -1,10 +1,10 @@
-From 433c5a06b1195e2e689f8d260ec471caca2fa1b6 Mon Sep 17 00:00:00 2001
-Message-Id: <433c5a06b1195e2e689f8d260ec471caca2fa1b6.1676488652.git.stefan@agner.ch>
-In-Reply-To: <86f6a398d2c080f92d51048ededf45efbe3a96d4.1676488652.git.stefan@agner.ch>
-References: <86f6a398d2c080f92d51048ededf45efbe3a96d4.1676488652.git.stefan@agner.ch>
+From fee88e0053de7878977913311bdb153494aa6c61 Mon Sep 17 00:00:00 2001
+Message-Id: <fee88e0053de7878977913311bdb153494aa6c61.1646168061.git.stefan@agner.ch>
+In-Reply-To: <9f8390a715bc58e7423b65a18c4499761c84b819.1646168061.git.stefan@agner.ch>
+References: <9f8390a715bc58e7423b65a18c4499761c84b819.1646168061.git.stefan@agner.ch>
 From: Hyeonki Hong <hhk7734@gmail.com>
 Date: Fri, 27 Mar 2020 17:05:22 +0900
-Subject: [PATCH] arm64: dts: meson: add uart_A node
+Subject: [PATCH 4/7] arm64: dts: meson: add uart_A node
 
 The UART_A is available through J3 pin 8/10 and documented to be
 available as UART by default.
@@ -15,7 +15,7 @@ Signed-off-by: Stefan Agner <stefan@agner.ch>
  1 file changed, 7 insertions(+)
 
 diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-index 6dcf990e0efc..7eaaced7893b 100644
+index 5ca75696bd5c..738eb0339333 100644
 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
 +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
 @@ -12,6 +12,7 @@
@@ -26,7 +26,7 @@ index 6dcf990e0efc..7eaaced7893b 100644
  		ethernet0 = &ethmac;
  		rtc0 = &rtc;
  		rtc1 = &vrtc;
-@@ -730,6 +731,12 @@ &toddr_c {
+@@ -728,6 +729,12 @@ &toddr_c {
  	status = "okay";
  };
  
@@ -40,5 +40,5 @@ index 6dcf990e0efc..7eaaced7893b 100644
  	status = "okay";
  	pinctrl-0 = <&uart_ao_a_pins>;
 -- 
-2.39.1
+2.35.1
 

buildroot-external/board/hardkernel/patches/linux/0005-arm64-dts-meson-add-i2c2-node-to-ODROID-N2-N2.patch

@@ -1,10 +1,10 @@
-From 00129576fb656015b66958f4d7370ee7e2d990e2 Mon Sep 17 00:00:00 2001
-Message-Id: <00129576fb656015b66958f4d7370ee7e2d990e2.1676488652.git.stefan@agner.ch>
-In-Reply-To: <86f6a398d2c080f92d51048ededf45efbe3a96d4.1676488652.git.stefan@agner.ch>
-References: <86f6a398d2c080f92d51048ededf45efbe3a96d4.1676488652.git.stefan@agner.ch>
+From 51ded393003a60d3932081114bff142c4c69b293 Mon Sep 17 00:00:00 2001
+Message-Id: <51ded393003a60d3932081114bff142c4c69b293.1646168061.git.stefan@agner.ch>
+In-Reply-To: <9f8390a715bc58e7423b65a18c4499761c84b819.1646168061.git.stefan@agner.ch>
+References: <9f8390a715bc58e7423b65a18c4499761c84b819.1646168061.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Thu, 29 Apr 2021 21:32:43 +0200
-Subject: [PATCH] arm64: dts: meson: add i2c2 node to ODROID N2/N2+
+Subject: [PATCH 5/7] arm64: dts: meson: add i2c2 node to ODROID N2/N2+
 
 The J2 connectors pinout documents "I2C.SDA0/SCL0" on pin 3 and 5, which
 are connected to GPIOX_17/18. This GPIO allow to mux I2C to the second
@@ -16,10 +16,10 @@ Signed-off-by: Stefan Agner <stefan@agner.ch>
  1 file changed, 6 insertions(+)
 
 diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-index 7eaaced7893b..8d183253389c 100644
+index 738eb0339333..2e9fefc20b19 100644
 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
 +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-@@ -588,6 +588,12 @@ &ir {
+@@ -586,6 +586,12 @@ &ir {
  	linux,rc-map-name = "rc-odroid";
  };
  
@@ -33,5 +33,5 @@ index 7eaaced7893b..8d183253389c 100644
  	status = "okay";
  	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
 -- 
-2.39.1
+2.35.1
 

buildroot-external/board/hardkernel/patches/linux/0006-ODROID-C4-arm64-dts-add-uart_A-node.patch

@@ -1,17 +1,17 @@
-From d6b1ddfb5816b887470452920d273661e361632d Mon Sep 17 00:00:00 2001
-Message-Id: <d6b1ddfb5816b887470452920d273661e361632d.1676488652.git.stefan@agner.ch>
-In-Reply-To: <86f6a398d2c080f92d51048ededf45efbe3a96d4.1676488652.git.stefan@agner.ch>
-References: <86f6a398d2c080f92d51048ededf45efbe3a96d4.1676488652.git.stefan@agner.ch>
+From 0ad900b2d6e895b1f1788d51e471863743727d71 Mon Sep 17 00:00:00 2001
+Message-Id: <0ad900b2d6e895b1f1788d51e471863743727d71.1646168061.git.stefan@agner.ch>
+In-Reply-To: <9f8390a715bc58e7423b65a18c4499761c84b819.1646168061.git.stefan@agner.ch>
+References: <9f8390a715bc58e7423b65a18c4499761c84b819.1646168061.git.stefan@agner.ch>
 From: Hyeonki Hong <hhk7734@gmail.com>
 Date: Tue, 1 Mar 2022 21:51:50 +0100
-Subject: [PATCH] ODROID-C4: arm64/dts: add uart_A node
+Subject: [PATCH 6/7] ODROID-C4: arm64/dts: add uart_A node
 
 ---
  arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi | 9 ++++++++-
  1 file changed, 8 insertions(+), 1 deletion(-)
 
 diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
-index ddb1b345397f..49b88c1e11cd 100644
+index 76ad052fbf0c..690e4823a9d0 100644
 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
 +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
 @@ -10,8 +10,9 @@
@@ -25,7 +25,7 @@ index ddb1b345397f..49b88c1e11cd 100644
  	};
  
  	chosen {
-@@ -450,6 +451,12 @@ &tohdmitx {
+@@ -436,6 +437,12 @@ &tohdmitx {
  	status = "okay";
  };
  
@@ -39,5 +39,5 @@ index ddb1b345397f..49b88c1e11cd 100644
  	status = "okay";
  	pinctrl-0 = <&uart_ao_a_pins>;
 -- 
-2.39.1
+2.35.1
 

buildroot-external/board/hardkernel/patches/linux/0007-ODROID-C4-arm64-dts-add-i2c2-i2c3-node.patch

@@ -1,17 +1,17 @@
-From a78a968b4a51a32f44c170c591a46b27326b97f2 Mon Sep 17 00:00:00 2001
-Message-Id: <a78a968b4a51a32f44c170c591a46b27326b97f2.1676488652.git.stefan@agner.ch>
-In-Reply-To: <86f6a398d2c080f92d51048ededf45efbe3a96d4.1676488652.git.stefan@agner.ch>
-References: <86f6a398d2c080f92d51048ededf45efbe3a96d4.1676488652.git.stefan@agner.ch>
+From 105003d49a505e0f0e033a6f3d945f745912c7b1 Mon Sep 17 00:00:00 2001
+Message-Id: <105003d49a505e0f0e033a6f3d945f745912c7b1.1646168061.git.stefan@agner.ch>
+In-Reply-To: <9f8390a715bc58e7423b65a18c4499761c84b819.1646168061.git.stefan@agner.ch>
+References: <9f8390a715bc58e7423b65a18c4499761c84b819.1646168061.git.stefan@agner.ch>
 From: Hyeonki Hong <hhk7734@gmail.com>
 Date: Tue, 1 Mar 2022 21:53:32 +0100
-Subject: [PATCH] ODROID-C4: arm64/dts: add i2c2, i2c3 node
+Subject: [PATCH 7/7] ODROID-C4: arm64/dts: add i2c2, i2c3 node
 
 ---
  .../boot/dts/amlogic/meson-sm1-odroid.dtsi    | 53 +++++++++++++++++++
  1 file changed, 53 insertions(+)
 
 diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
-index 49b88c1e11cd..b8d88310ae3a 100644
+index 690e4823a9d0..85637c1c846b 100644
 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
 +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
 @@ -11,6 +11,8 @@
@@ -23,7 +23,7 @@ index 49b88c1e11cd..b8d88310ae3a 100644
  		serial0 = &uart_AO;
  		serial1 = &uart_A;
  	};
-@@ -387,6 +389,57 @@ &ir {
+@@ -373,6 +375,57 @@ &ir {
  	pinctrl-names = "default";
  };
  
@@ -82,5 +82,5 @@ index 49b88c1e11cd..b8d88310ae3a 100644
  	pinctrl-0 = <&pwm_ao_d_e_pins>;
  	pinctrl-names = "default";
 -- 
-2.39.1
+2.35.1
 

buildroot-external/board/hardkernel/patches/linux/0008-arm64-dts-amlogic-add-uartA-uartC-to-ODROID-C2.patch

@@ -1,48 +0,0 @@
-From 8263e17f170296c28d3a781d5b05e59778fe4a27 Mon Sep 17 00:00:00 2001
-Message-Id: <8263e17f170296c28d3a781d5b05e59778fe4a27.1676488652.git.stefan@agner.ch>
-In-Reply-To: <86f6a398d2c080f92d51048ededf45efbe3a96d4.1676488652.git.stefan@agner.ch>
-References: <86f6a398d2c080f92d51048ededf45efbe3a96d4.1676488652.git.stefan@agner.ch>
-From: Stefan Agner <stefan@agner.ch>
-Date: Wed, 15 Feb 2023 20:15:07 +0100
-Subject: [PATCH] arm64: dts: amlogic: add uartA/uartC to ODROID-C2
-
-Signed-off-by: Stefan Agner <stefan@agner.ch>
----
- .../arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 14 ++++++++++++++
- 1 file changed, 14 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
-index 201596247fd9..b2cb12fb46fd 100644
---- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
-+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
-@@ -17,6 +17,8 @@ / {
- 
- 	aliases {
- 		serial0 = &uart_AO;
-+		serial1 = &uart_A;
-+		serial2 = &uart_C;
- 		ethernet0 = &ethmac;
- 	};
- 
-@@ -399,6 +401,18 @@ &uart_AO {
- 	pinctrl-names = "default";
- };
- 
-+&uart_A {
-+	status = "disabled";
-+	pinctrl-0 = <&uart_a_pins>;
-+	pinctrl-names = "default";
-+};
-+
-+&uart_C {
-+	status = "disabled";
-+	pinctrl-0 = <&uart_c_pins>;
-+	pinctrl-names = "default";
-+};
-+
- &usb0_phy {
- 	status = "disabled";
- 	phy-supply = <&usb_otg_pwr>;
--- 
-2.39.1
-

buildroot-external/board/hardkernel/patches/linux/0009-arm64-dts-amlogic-meson-gx-add-missing-pins-for-I2C-.patch

@@ -1,38 +0,0 @@
-From ceef8d62bcf0c2c7b3e96831e85a872009657cf0 Mon Sep 17 00:00:00 2001
-Message-Id: <ceef8d62bcf0c2c7b3e96831e85a872009657cf0.1676488652.git.stefan@agner.ch>
-In-Reply-To: <86f6a398d2c080f92d51048ededf45efbe3a96d4.1676488652.git.stefan@agner.ch>
-References: <86f6a398d2c080f92d51048ededf45efbe3a96d4.1676488652.git.stefan@agner.ch>
-From: Stefan Agner <stefan@agner.ch>
-Date: Wed, 15 Feb 2023 20:16:29 +0100
-Subject: [PATCH] arm64: dts: amlogic: meson-gx: add missing pins for I2C A/B
-
-Signed-off-by: Stefan Agner <stefan@agner.ch>
----
- arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 4 ++++
- 1 file changed, 4 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
-index 7c029f552a23..b3c22861b022 100644
---- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
-+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
-@@ -333,6 +333,8 @@ &hwrng {
- 
- &i2c_A {
- 	clocks = <&clkc CLKID_I2C>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c_a_pins>;
- };
- 
- &i2c_AO {
-@@ -341,6 +343,8 @@ &i2c_AO {
- 
- &i2c_B {
- 	clocks = <&clkc CLKID_I2C>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c_b_pins>;
- };
- 
- &i2c_C {
--- 
-2.39.1
-

buildroot-external/board/hardkernel/patches/linux/board-odroidc2-add-uartA-uartC.patch

@@ -0,0 +1,32 @@
+diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+index 1cc9dc6..9f48dff 100644
+--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
++++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+@@ -16,6 +16,8 @@
+ 
+ 	aliases {
+ 		serial0 = &uart_AO;
++		serial1 = &uart_A;
++		serial2 = &uart_C;
+ 		ethernet0 = &ethmac;
+ 	};
+ 
+@@ -290,6 +355,18 @@
+ 	pinctrl-names = "default";
+ };
+ 
++&uart_A {
++	status = "disabled";
++	pinctrl-0 = <&uart_a_pins>;
++	pinctrl-names = "default";
++};
++
++&uart_C {
++	status = "disabled";
++	pinctrl-0 = <&uart_c_pins>;
++	pinctrl-names = "default";
++};
++
+ &usb0_phy {
+ 	status = "okay";
+ 	phy-supply = <&usb_otg_pwr>;

buildroot-external/board/hardkernel/patches/linux/general-meson64-i2cX-missing-pins.patch

@@ -0,0 +1,22 @@
+diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+index 98cbba6..48ca119 100644
+--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
++++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+@@ -321,6 +322,8 @@
+ 
+ &i2c_A {
+ 	clocks = <&clkc CLKID_I2C>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&i2c_a_pins>;
+ };
+ 
+ &i2c_AO {
+@@ -329,6 +332,8 @@
+ 
+ &i2c_B {
+ 	clocks = <&clkc CLKID_I2C>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&i2c_b_pins>;
+ };
+ 
+ &i2c_C {

buildroot-external/board/khadas/kernel-vim.config

@@ -13,6 +13,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_MEMCG=y
 CONFIG_BLK_CGROUP=y
 CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
 CONFIG_CGROUP_PIDS=y
 CONFIG_CGROUP_FREEZER=y
 CONFIG_CGROUP_HUGETLB=y
@@ -163,6 +164,8 @@ CONFIG_PCIE_DW_PLAT_HOST=y
 # CONFIG_PCI_MESON is not set
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_FW_LOADER_USER_HELPER=y
+CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
 CONFIG_SIMPLE_PM_BUS=y
 CONFIG_MTD=y
 CONFIG_MTD_BLOCK=y

buildroot-external/board/khadas/vim3/meta

@@ -4,9 +4,7 @@ CHASSIS=embedded
 BOOTLOADER=uboot
 KERNEL_FILE=Image
 BOOT_SYS=mbr
-BOOT_SIZE=24M
 BOOT_SPL=true
-BOOT_SPL_SIZE=8M
 BOOT_ENV_SIZE=0x2000
 SUPERVISOR_MACHINE=khadas-vim3
 SUPERVISOR_ARCH=aarch64

buildroot-external/board/khadas/vim3/uboot-boot.ush

@@ -18,11 +18,8 @@ test -n "${BOOT_ORDER}" || setenv BOOT_ORDER "A B"
 test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3
 test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3
 
-# Allows ConditionFirstBoot=
-test -n "${MACHINE_ID}" || setenv BOOT_CONDITION "systemd.condition-first-boot=true"
-
 # HassOS bootargs
-setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 net.naming-scheme=v250 systemd.machine_id=${MACHINE_ID} fsck.repair=yes ${BOOT_CONDITION}"
+setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor systemd.machine_id=${MACHINE_ID} cgroup_enable=memory fsck.repair=yes"
 
 # HassOS system A/B
 setenv bootargs_a "root=PARTUUID=48617373-06 rootfstype=squashfs ro rootwait"

buildroot-external/board/pc/generic-x86-64/kernel.config

@@ -1,11 +1,6 @@
 CONFIG_EFI_STUB=y
 
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_INTEL_IDLE=y
-
 CONFIG_SCSI_LOWLEVEL=y
-CONFIG_SCSI_HPSA=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_BLK_DEV_NVME=y
 
@@ -34,10 +29,6 @@ CONFIG_IWLWIFI=m
 CONFIG_IWLDVM=m
 CONFIG_IWLMVM=m
 
-CONFIG_WLAN_VENDOR_REALTEK=y
-CONFIG_RTL_CARDS=m
-CONFIG_RTL8723BE=y
-
 CONFIG_SYSFB=y
 
 CONFIG_FB=y
@@ -45,7 +36,6 @@ CONFIG_FB_EFI=y
 
 CONFIG_DRM=y
 CONFIG_DRM_FBDEV_EMULATION=y
-CONFIG_DRM_AMDGPU=m
 CONFIG_DRM_I915=m
 CONFIG_DRM_I915_CAPTURE_ERROR=y
 CONFIG_DRM_I915_COMPRESS_ERROR=y
@@ -164,7 +154,3 @@ CONFIG_SND_SOC_SOF_INTEL_SOUNDWIRE=m
 CONFIG_SND_SOC_SOF_XTENSA=m
 
 CONFIG_THINKPAD_ACPI=m
-
-CONFIG_SENSORS_K10TEMP=m
-
-CONFIG_UHID=y

buildroot-external/board/pc/generic-x86-64/meta

@@ -4,7 +4,6 @@ CHASSIS=embedded
 BOOTLOADER=grub
 KERNEL_FILE=bzImage
 BOOT_SYS=efi
-BOOT_SIZE=32M
 BOOT_SPL=false
 DISK_SIZE=6
 SUPERVISOR_MACHINE=generic-x86-64

buildroot-external/board/pc/grub.cfg

@@ -15,52 +15,34 @@ for SLOT in $ORDER; do
         INDEX=0
         OK=$A_OK
         TRY=$A_TRY
+        A_TRY=1
     fi
     if [ "$SLOT" == "B" ]; then
         INDEX=1
         OK=$B_OK
         TRY=$B_TRY
+        B_TRY=1
     fi
-    if [ "$OK" -eq 1 -a "$TRY" -lt 3 ]; then
+    if [ "$OK" -eq 1 -a "$TRY" -eq 0 ]; then
         default=$INDEX
-
-        # increment attempts and save back to slot
-        if [ "$TRY" -eq 1 ]; then
-            TRY=2
-        elif [ "$TRY" -eq 2 ]; then
-            TRY=3
-	else
-            TRY=1
-        fi
-
-	if [ "$SLOT" == "A" ]; then
-            A_TRY=$TRY
-        fi
-	if [ "$SLOT" == "B" ]; then
-            B_TRY=$TRY
-        fi
-
         break
     fi
 done
 
-# No bootable slot found, choose rescue...
+# reset booted flags
 if [ "$default" -eq 99 ]; then
-    if [ "$A_OK" -eq 1 ]; then
-        default=2
+    if [ "$A_OK" -eq 1 -a "$A_TRY" -eq 1 ]; then
+        A_TRY=0
     fi
-    if [ "$B_OK" -eq 1 ]; then
-        default=3
+    if [ "$B_OK" -eq 1 -a "$B_TRY" -eq 1 ]; then
+        B_TRY=0
     fi
-fi
-
-if [ "$MACHINE_ID" == "" ]; then
-    boot_condition="systemd.condition-first-boot=true"
+    default=0
 fi
 
 save_env A_TRY A_OK B_TRY B_OK ORDER MACHINE_ID
 
-default_cmdline="rootwait zram.enabled=1 zram.num_devices=3 net.naming-scheme=v250 systemd.machine_id=$MACHINE_ID fsck.repair=yes $boot_condition"
+default_cmdline="rootwait zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor systemd.machine_id=$MACHINE_ID cgroup_enable=memory fsck.repair=yes"
 file_env -f ($root)/cmdline.txt cmdline
 
 # root is a full HDD/partition definition in GRUB format like hd0,gpt1
@@ -75,11 +57,3 @@ menuentry "Slot A (OK=$A_OK TRY=$A_TRY)" {
 menuentry "Slot B (OK=$B_OK TRY=$B_TRY)" {
     linux (${boothd},gpt4)/bzImage root=PARTUUID=a3ec664e-32ce-4665-95ea-7ae90ce9aa20 $default_cmdline $cmdline rauc.slot=B
 }
-
-menuentry "Slot A (rescue shell)" {
-    linux (${boothd},gpt2)/bzImage root=PARTUUID=8d3d53e3-6d49-4c38-8349-aff6859e82fd $default_cmdline $cmdline rauc.slot=A systemd.unit=recovery.target
-}
-
-menuentry "Slot B (rescue shell)" {
-    linux (${boothd},gpt4)/bzImage root=PARTUUID=a3ec664e-32ce-4665-95ea-7ae90ce9aa20 $default_cmdline $cmdline rauc.slot=B systemd.unit=recovery.target
-}

buildroot-external/board/pc/ova/kernel.config

@@ -4,7 +4,6 @@ CONFIG_HOTPLUG_CPU=y
 CONFIG_MEMORY_HOTPLUG=y
 CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=y
 CONFIG_MEMORY_HOTREMOVE=y
-CONFIG_ACPI_HOTPLUG_MEMORY=y
 
 CONFIG_VMXNET3=y
 CONFIG_VMWARE_PVSCSI=y
@@ -13,19 +12,6 @@ CONFIG_VMWARE_VMCI=y
 CONFIG_VMWARE_BALLOON=y
 CONFIG_VMWARE_PVSCSI=y
 
-# These options are for LXD Guest Support
-CONFIG_NET_9P=m
-CONFIG_NET_9P_VIRTIO=m
-CONFIG_9P_FS=m
-CONFIG_9P_FS_POSIX_ACL=m
-CONFIG_PCI=y
-CONFIG_VSOCKETS=m
-CONFIG_VIRTIO_VSOCKETS_COMMON=m
-CONFIG_VHOST_VSOCK=m
-
-# VirtualBox
-CONFIG_VBOXGUEST=m
-
 CONFIG_VIRTIO=y
 CONFIG_VIRTIO_PCI=y
 CONFIG_VIRTIO_NET=y
@@ -38,10 +24,6 @@ CONFIG_VIRTIO_VSOCKETS=m
 CONFIG_VIRTIO_MMIO=y
 CONFIG_SCSI_VIRTIO=y
 CONFIG_HW_RANDOM_VIRTIO=y
-CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
-CONFIG_VIRTIO_IOMMU=m
-CONFIG_CRYPTO_ENGINE=m
-CONFIG_CRYPTO_DEV_VIRTIO=m
 
 # These options are needed for virtio-fs
 CONFIG_FUSE_FS=y
@@ -96,5 +78,3 @@ CONFIG_FB_HYPERV=y
 CONFIG_IGBVF=m
 CONFIG_IXGBEVF=m
 CONFIG_I40EVF=m
-CONFIG_MLX5_CORE=m
-CONFIG_MLX5_CORE_EN=y

buildroot-external/board/pc/ova/meta

@@ -4,7 +4,6 @@ CHASSIS=vm
 BOOTLOADER=grub
 KERNEL_FILE=bzImage
 BOOT_SYS=efi
-BOOT_SIZE=32M
 BOOT_SPL=false
 DISK_SIZE=32
 SUPERVISOR_MACHINE=qemux86-64

buildroot-external/board/pc/patches/linux/0001-iwlwifi-Make-missed-beacon-timeout-configurable.patch

@@ -1,5 +1,5 @@
-From bf633d2f767c88bd54fbe1cf66122703bb1b98ae Mon Sep 17 00:00:00 2001
-Message-Id: <bf633d2f767c88bd54fbe1cf66122703bb1b98ae.1676491209.git.stefan@agner.ch>
+From d6be44a647dc6ae5ad2dcf44ff4a97030f1c498e Mon Sep 17 00:00:00 2001
+Message-Id: <d6be44a647dc6ae5ad2dcf44ff4a97030f1c498e.1646056626.git.stefan@agner.ch>
 From: Zachary Michaels <mikezackles@gmail.com>
 Date: Thu, 7 Jan 2021 08:13:11 -0800
 Subject: [PATCH] iwlwifi: Make missed beacon timeout configurable
@@ -19,21 +19,21 @@ Signed-off-by: Stefan Agner <stefan@agner.ch>
  4 files changed, 8 insertions(+), 2 deletions(-)
 
 diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
-index a2203f661321..a8a9d9559b53 100644
+index 524b0ad87357..a055674f14c6 100644
 --- a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
 +++ b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
-@@ -1779,6 +1779,7 @@ struct iwl_mod_params iwlwifi_mod_params = {
+@@ -1711,6 +1711,7 @@ struct iwl_mod_params iwlwifi_mod_params = {
  	.power_level = IWL_POWER_INDEX_1,
  	.uapsd_disable = IWL_DISABLE_UAPSD_BSS | IWL_DISABLE_UAPSD_P2P_CLIENT,
- 	.enable_ini = ENABLE_INI,
+ 	.enable_ini = true,
 +	.beacon_timeout = 16,
  	/* the rest are 0 by default */
  };
  IWL_EXPORT_SYMBOL(iwlwifi_mod_params);
-@@ -1926,6 +1927,9 @@ module_param_cb(enable_ini, &enable_ini_ops, &iwlwifi_mod_params.enable_ini, 064
+@@ -1826,6 +1827,9 @@ module_param_named(enable_ini, iwlwifi_mod_params.enable_ini,
+ 		   bool, S_IRUGO | S_IWUSR);
  MODULE_PARM_DESC(enable_ini,
- 		 "0:disable, 1-15:FW_DBG_PRESET Values, 16:enabled without preset value defined,"
- 		 "Debug INI TLV FW debug infrastructure (default: 16)");
+ 		 "Enable debug INI TLV FW debug infrastructure (default: true");
 +module_param_named(beacon_timeout, iwlwifi_mod_params.beacon_timeout, uint, 0644);
 +MODULE_PARM_DESC(beacon_timeout,
 +		 "Number of missed beacons before disconnecting (default: 16)");
@@ -41,7 +41,7 @@ index a2203f661321..a8a9d9559b53 100644
  /*
   * set bt_coex_active to true, uCode will do kill/defer
 diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-modparams.h b/drivers/net/wireless/intel/iwlwifi/iwl-modparams.h
-index d0b4d02bdab9..f74e85ae0076 100644
+index 004ebdac4535..198c5ac2575b 100644
 --- a/drivers/net/wireless/intel/iwlwifi/iwl-modparams.h
 +++ b/drivers/net/wireless/intel/iwlwifi/iwl-modparams.h
 @@ -62,6 +62,7 @@ enum iwl_uapsd_disable {
@@ -52,16 +52,16 @@ index d0b4d02bdab9..f74e85ae0076 100644
   */
  struct iwl_mod_params {
  	int swcrypto;
-@@ -85,6 +86,7 @@ struct iwl_mod_params {
+@@ -84,6 +85,7 @@ struct iwl_mod_params {
+ 	bool disable_11ax;
  	bool remove_when_gone;
- 	u32 enable_ini;
- 	bool disable_11be;
+ 	bool enable_ini;
 +	u32 beacon_timeout;
  };
  
  static inline bool iwl_enable_rx_ampdu(void)
 diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c
-index de0c545d50fd..24eb541209ef 100644
+index fd352b2624a6..2f70a36b1af9 100644
 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c
 +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c
 @@ -8,6 +8,7 @@
@@ -82,10 +82,10 @@ index de0c545d50fd..24eb541209ef 100644
  	else if (rx_missed_bcon_since_rx > IWL_MVM_MISSED_BEACONS_THRESHOLD)
  		ieee80211_beacon_loss(vif);
 diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h
-index 1ccb3cad7cdc..56611a1b40ee 100644
+index 46af8dd2dc93..bb05df29c88b 100644
 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h
 +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h
-@@ -39,7 +39,6 @@
+@@ -38,7 +38,6 @@
  /* RSSI offset for WkP */
  #define IWL_RSSI_OFFSET 50
  #define IWL_MVM_MISSED_BEACONS_THRESHOLD 8
@@ -94,5 +94,5 @@ index 1ccb3cad7cdc..56611a1b40ee 100644
  /* A TimeUnit is 1024 microsecond */
  #define MSEC_TO_TU(_msec)	(_msec*1000/1024)
 -- 
-2.39.1
+2.35.1
 

buildroot-external/board/raspberrypi/cmdline.txt

@@ -1 +1 @@
-dwc_otg.lpm_enable=0 console=tty1 usb-storage.quirks=174c:55aa:u,2109:0715:u,152d:0578:u,152d:0579:u,152d:1561:u,174c:0829:u,14b0:0206:u,174c:225c:u
+dwc_otg.lpm_enable=0 console=tty1 usb-storage.quirks=174c:55aa:u,2109:0715:u,152d:0578:u,152d:0579:u,152d:1561:u,174c:0829:u,14b0:0206:u,174c:55aa:u

buildroot-external/board/raspberrypi/config.txt

@@ -75,8 +75,6 @@ dtparam=audio=on
 # Enable DRM VC4 V3D driver on top of the dispmanx display stack
 dtoverlay=vc4-fkms-v3d
 max_framebuffers=2
-# Enable boost from 1.5Ghz to 1.8Ghz on compatible models
-arm_boost=1
 
 [all]
 #dtoverlay=vc4-fkms-v3d

buildroot-external/board/raspberrypi/patches/linux/0001-ARM-dts-bcm283x-add-compatible-picked-up-by-U-Boot.patch

@@ -1,5 +1,5 @@
-From 57188c09ac02bfa61cce55932ccba43ec7210e54 Mon Sep 17 00:00:00 2001
-Message-Id: <57188c09ac02bfa61cce55932ccba43ec7210e54.1677499675.git.stefan@agner.ch>
+From 2230740c7f74678ca80da55f74ccc24f5aa6bd35 Mon Sep 17 00:00:00 2001
+Message-Id: <2230740c7f74678ca80da55f74ccc24f5aa6bd35.1614676528.git.stefan@agner.ch>
 From: Pascal Vizeli <pvizeli@syshack.ch>
 Date: Tue, 2 Jun 2020 21:20:08 +0000
 Subject: [PATCH] ARM: dts: bcm283x: add compatible picked up by U-Boot
@@ -17,10 +17,10 @@ Signed-off-by: Stefan Agner <stefan@agner.ch>
  2 files changed, 5 insertions(+), 5 deletions(-)
 
 diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
-index 941c4d16791b..3cd49fa4bafd 100644
+index b4bca5af95e1..c31b87b5bb3a 100644
 --- a/arch/arm/boot/dts/bcm2711.dtsi
 +++ b/arch/arm/boot/dts/bcm2711.dtsi
-@@ -128,7 +128,7 @@ rng@7e104000 {
+@@ -127,7 +127,7 @@ rng@7e104000 {
  		};
  
  		uart2: serial@7e201400 {
@@ -29,7 +29,7 @@ index 941c4d16791b..3cd49fa4bafd 100644
  			reg = <0x7e201400 0x200>;
  			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
  			clocks = <&clocks BCM2835_CLOCK_UART>,
-@@ -139,7 +139,7 @@ uart2: serial@7e201400 {
+@@ -138,7 +138,7 @@ uart2: serial@7e201400 {
  		};
  
  		uart3: serial@7e201600 {
@@ -38,7 +38,7 @@ index 941c4d16791b..3cd49fa4bafd 100644
  			reg = <0x7e201600 0x200>;
  			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
  			clocks = <&clocks BCM2835_CLOCK_UART>,
-@@ -150,7 +150,7 @@ uart3: serial@7e201600 {
+@@ -149,7 +149,7 @@ uart3: serial@7e201600 {
  		};
  
  		uart4: serial@7e201800 {
@@ -47,7 +47,7 @@ index 941c4d16791b..3cd49fa4bafd 100644
  			reg = <0x7e201800 0x200>;
  			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
  			clocks = <&clocks BCM2835_CLOCK_UART>,
-@@ -161,7 +161,7 @@ uart4: serial@7e201800 {
+@@ -160,7 +160,7 @@ uart4: serial@7e201800 {
  		};
  
  		uart5: serial@7e201a00 {
@@ -57,10 +57,10 @@ index 941c4d16791b..3cd49fa4bafd 100644
  			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
  			clocks = <&clocks BCM2835_CLOCK_UART>,
 diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
-index d2d9c6e67f39..7b9a2e8cf529 100644
+index 346838ee9d21..7f289fbca28c 100644
 --- a/arch/arm/boot/dts/bcm283x.dtsi
 +++ b/arch/arm/boot/dts/bcm283x.dtsi
-@@ -302,7 +302,7 @@ uart1_ctsrts_gpio42: uart1_ctsrts_gpio42 {
+@@ -300,7 +300,7 @@ uart1_ctsrts_gpio42: uart1_ctsrts_gpio42 {
  		};
  
  		uart0: serial@7e201000 {
@@ -70,5 +70,5 @@ index d2d9c6e67f39..7b9a2e8cf529 100644
  			interrupts = <2 25>;
  			clocks = <&clocks BCM2835_CLOCK_UART>,
 -- 
-2.39.1
+2.30.1
 

buildroot-external/board/raspberrypi/patches/uboot/0001-rpi-Use-CONFIG_OF_BOARD-instead-of-CONFIG_EMBED.patch

@@ -1,5 +1,5 @@
-From 135d886b4e5077c8fa96a5449a70d81ae9c1c3d0 Mon Sep 17 00:00:00 2001
-Message-Id: <135d886b4e5077c8fa96a5449a70d81ae9c1c3d0.1668448794.git.stefan@agner.ch>
+From 24b77460dbfa2497ceb7a1611bf28b6eb88a1d74 Mon Sep 17 00:00:00 2001
+Message-Id: <24b77460dbfa2497ceb7a1611bf28b6eb88a1d74.1654086219.git.stefan@agner.ch>
 From: Pascal Vizeli <pvizeli@syshack.ch>
 Date: Tue, 10 Dec 2019 09:48:46 +0000
 Subject: [PATCH] rpi: Use CONFIG_OF_BOARD instead of CONFIG_EMBED
@@ -14,10 +14,10 @@ Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch>
  5 files changed, 5 insertions(+), 5 deletions(-)
 
 diff --git a/configs/rpi_0_w_defconfig b/configs/rpi_0_w_defconfig
-index baa8c37810..f20aa164e5 100644
+index 6d76d12910..ebc2be002f 100644
 --- a/configs/rpi_0_w_defconfig
 +++ b/configs/rpi_0_w_defconfig
-@@ -23,7 +23,7 @@ CONFIG_CMD_GPIO=y
+@@ -18,7 +18,7 @@ CONFIG_CMD_GPIO=y
  CONFIG_CMD_MMC=y
  CONFIG_CMD_USB=y
  CONFIG_CMD_FS_UUID=y
@@ -27,10 +27,10 @@ index baa8c37810..f20aa164e5 100644
  CONFIG_SYS_RELOC_GD_ENV_ADDR=y
  CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 diff --git a/configs/rpi_2_defconfig b/configs/rpi_2_defconfig
-index baae6d4871..60987ad91a 100644
+index 1931607132..164562cd57 100644
 --- a/configs/rpi_2_defconfig
 +++ b/configs/rpi_2_defconfig
-@@ -24,7 +24,7 @@ CONFIG_CMD_GPIO=y
+@@ -19,7 +19,7 @@ CONFIG_CMD_GPIO=y
  CONFIG_CMD_MMC=y
  CONFIG_CMD_USB=y
  CONFIG_CMD_FS_UUID=y
@@ -40,10 +40,10 @@ index baae6d4871..60987ad91a 100644
  CONFIG_SYS_RELOC_GD_ENV_ADDR=y
  CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 diff --git a/configs/rpi_3_32b_defconfig b/configs/rpi_3_32b_defconfig
-index f51f3de596..e6de8669d0 100644
+index 060fd36da5..78448bbbfe 100644
 --- a/configs/rpi_3_32b_defconfig
 +++ b/configs/rpi_3_32b_defconfig
-@@ -23,7 +23,7 @@ CONFIG_CMD_GPIO=y
+@@ -20,7 +20,7 @@ CONFIG_CMD_GPIO=y
  CONFIG_CMD_MMC=y
  CONFIG_CMD_USB=y
  CONFIG_CMD_FS_UUID=y
@@ -53,10 +53,10 @@ index f51f3de596..e6de8669d0 100644
  CONFIG_SYS_RELOC_GD_ENV_ADDR=y
  CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 diff --git a/configs/rpi_3_defconfig b/configs/rpi_3_defconfig
-index bc1a318db4..70f4f8ed70 100644
+index 8016fe1d55..b49dd9af98 100644
 --- a/configs/rpi_3_defconfig
 +++ b/configs/rpi_3_defconfig
-@@ -22,7 +22,7 @@ CONFIG_CMD_GPIO=y
+@@ -19,7 +19,7 @@ CONFIG_CMD_GPIO=y
  CONFIG_CMD_MMC=y
  CONFIG_CMD_USB=y
  CONFIG_CMD_FS_UUID=y
@@ -66,10 +66,10 @@ index bc1a318db4..70f4f8ed70 100644
  CONFIG_SYS_RELOC_GD_ENV_ADDR=y
  CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 diff --git a/configs/rpi_defconfig b/configs/rpi_defconfig
-index 1d356b4b2e..6f345c790b 100644
+index 8acf04d0e4..5d5e700224 100644
 --- a/configs/rpi_defconfig
 +++ b/configs/rpi_defconfig
-@@ -23,7 +23,7 @@ CONFIG_CMD_GPIO=y
+@@ -18,7 +18,7 @@ CONFIG_CMD_GPIO=y
  CONFIG_CMD_MMC=y
  CONFIG_CMD_USB=y
  CONFIG_CMD_FS_UUID=y
@@ -79,5 +79,5 @@ index 1d356b4b2e..6f345c790b 100644
  CONFIG_SYS_RELOC_GD_ENV_ADDR=y
  CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 -- 
-2.38.1
+2.36.1
 

buildroot-external/board/raspberrypi/patches/uboot/0002-usb-xhci-reset-endpoint-on-USB-stall.patch

@@ -0,0 +1,87 @@
+From c942eb452c1c31fe6259178b6e9fea5456d7fb9c Mon Sep 17 00:00:00 2001
+Message-Id: <c942eb452c1c31fe6259178b6e9fea5456d7fb9c.1654086219.git.stefan@agner.ch>
+In-Reply-To: <24b77460dbfa2497ceb7a1611bf28b6eb88a1d74.1654086219.git.stefan@agner.ch>
+References: <24b77460dbfa2497ceb7a1611bf28b6eb88a1d74.1654086219.git.stefan@agner.ch>
+From: Stefan Agner <stefan@agner.ch>
+Date: Mon, 27 Sep 2021 12:28:04 +0200
+Subject: [PATCH] usb: xhci: reset endpoint on USB stall
+
+There are devices which cause a USB stall when trying to read strings.
+Specifically Arduino Mega R3 stalls when trying to read the product
+string.
+
+The stall currently remains unhandled, and subsequent retries submit new
+transfers on a stopped endpoint which ultimately cause a crash in
+abort_td():
+WARN halted endpoint, queueing URB anyway.
+XHCI control transfer timed out, aborting...
+Unexpected XHCI event TRB, skipping... (3affe040 00000000 13000000 02008401)
+BUG at drivers/usb/host/xhci-ring.c:505/abort_td()!
+BUG!
+resetting ...
+
+Linux seems to be able to recover from the stall by issuing a
+TRB_RESET_EP command.
+
+Introduce reset_ep() which issues a TRB_RESET_EP followed by setting the
+transfer ring dequeue pointer via TRB_SET_DEQ. This allows to properly
+recover from a USB stall error and continue communicating with the USB
+device.
+
+Signed-off-by: Stefan Agner <stefan@agner.ch>
+---
+ drivers/usb/host/xhci-ring.c | 31 +++++++++++++++++++++++++++++++
+ 1 file changed, 31 insertions(+)
+
+diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
+index 35bd5cd29e..430823cb9d 100644
+--- a/drivers/usb/host/xhci-ring.c
++++ b/drivers/usb/host/xhci-ring.c
+@@ -481,6 +481,33 @@ union xhci_trb *xhci_wait_for_event(struct xhci_ctrl *ctrl, trb_type expected)
+ 	BUG();
+ }
+ 
++/*
++ * Issue reset endpoint command for an endpoint. This is required to recover
++ * a halted endpoint (e.g. due to a stall error).
++ */
++static void reset_ep(struct usb_device *udev, int ep_index)
++{
++	struct xhci_ctrl *ctrl = xhci_get_ctrl(udev);
++	struct xhci_ring *ring =  ctrl->devs[udev->slot_id]->eps[ep_index].ring;
++	union xhci_trb *event;
++	u32 field;
++
++	printf("Resetting EP...\n");
++	xhci_queue_command(ctrl, NULL, udev->slot_id, ep_index, TRB_RESET_EP);
++	event = xhci_wait_for_event(ctrl, TRB_COMPLETION);
++	field = le32_to_cpu(event->trans_event.flags);
++	BUG_ON(TRB_TO_SLOT_ID(field) != udev->slot_id);
++	xhci_acknowledge_event(ctrl);
++
++	xhci_queue_command(ctrl, (void *)((uintptr_t)ring->enqueue |
++		ring->cycle_state), udev->slot_id, ep_index, TRB_SET_DEQ);
++	event = xhci_wait_for_event(ctrl, TRB_COMPLETION);
++	BUG_ON(TRB_TO_SLOT_ID(le32_to_cpu(event->event_cmd.flags))
++		!= udev->slot_id || GET_COMP_CODE(le32_to_cpu(
++		event->event_cmd.status)) != COMP_SUCCESS);
++	xhci_acknowledge_event(ctrl);
++}
++
+ /*
+  * Stops transfer processing for an endpoint and throws away all unprocessed
+  * TRBs by setting the xHC's dequeue pointer to our enqueue pointer. The next
+@@ -928,6 +955,10 @@ int xhci_ctrl_tx(struct usb_device *udev, unsigned long pipe,
+ 
+ 	record_transfer_result(udev, event, length);
+ 	xhci_acknowledge_event(ctrl);
++	if (udev->status == USB_ST_STALLED) {
++		reset_ep(udev, ep_index);
++		return -EPIPE;
++	}
+ 
+ 	/* Invalidate buffer to make it available to usb-core */
+ 	if (length > 0)
+-- 
+2.36.1
+

buildroot-external/board/raspberrypi/patches/uboot/0003-rpi-add-NVMe-to-boot-order.patch

@@ -1,7 +1,7 @@
-From 191b5f4e0408e40f35379fdaab6b37a7ad93e298 Mon Sep 17 00:00:00 2001
-Message-Id: <191b5f4e0408e40f35379fdaab6b37a7ad93e298.1668448794.git.stefan@agner.ch>
-In-Reply-To: <135d886b4e5077c8fa96a5449a70d81ae9c1c3d0.1668448794.git.stefan@agner.ch>
-References: <135d886b4e5077c8fa96a5449a70d81ae9c1c3d0.1668448794.git.stefan@agner.ch>
+From ae45864457182fcaa67911e1e3d8db242dff3646 Mon Sep 17 00:00:00 2001
+Message-Id: <ae45864457182fcaa67911e1e3d8db242dff3646.1654086219.git.stefan@agner.ch>
+In-Reply-To: <24b77460dbfa2497ceb7a1611bf28b6eb88a1d74.1654086219.git.stefan@agner.ch>
+References: <24b77460dbfa2497ceb7a1611bf28b6eb88a1d74.1654086219.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Tue, 29 Dec 2020 23:34:52 +0100
 Subject: [PATCH] rpi: add NVMe to boot order
@@ -15,10 +15,10 @@ Signed-off-by: Stefan Agner <stefan@agner.ch>
  1 file changed, 7 insertions(+)
 
 diff --git a/include/configs/rpi.h b/include/configs/rpi.h
-index cd8fe8b518..7257659932 100644
+index 4c5c1ac31f..e24c94c7d2 100644
 --- a/include/configs/rpi.h
 +++ b/include/configs/rpi.h
-@@ -131,6 +131,12 @@
+@@ -143,6 +143,12 @@
  	#define BOOT_TARGET_MMC(func)
  #endif
  
@@ -31,7 +31,7 @@ index cd8fe8b518..7257659932 100644
  #if CONFIG_IS_ENABLED(CMD_USB)
  	#define BOOT_TARGET_USB(func) func(USB, usb, 0)
  #else
-@@ -151,6 +157,7 @@
+@@ -163,6 +169,7 @@
  
  #define BOOT_TARGET_DEVICES(func) \
  	BOOT_TARGET_MMC(func) \
@@ -40,5 +40,5 @@ index cd8fe8b518..7257659932 100644
  	BOOT_TARGET_PXE(func) \
  	BOOT_TARGET_DHCP(func)
 -- 
-2.38.1
+2.36.1
 

buildroot-external/board/raspberrypi/patches/uboot/0004-Revert-nvme-Correct-the-prps-per-page-calculation-me.patch

@@ -1,7 +1,7 @@
-From 644bd3743aa8771ef7ecb7b7239308d6da2a5b35 Mon Sep 17 00:00:00 2001
-Message-Id: <644bd3743aa8771ef7ecb7b7239308d6da2a5b35.1668448794.git.stefan@agner.ch>
-In-Reply-To: <135d886b4e5077c8fa96a5449a70d81ae9c1c3d0.1668448794.git.stefan@agner.ch>
-References: <135d886b4e5077c8fa96a5449a70d81ae9c1c3d0.1668448794.git.stefan@agner.ch>
+From 3a13ff4eb509e8e80a52ae45c9a5573e745803c3 Mon Sep 17 00:00:00 2001
+Message-Id: <3a13ff4eb509e8e80a52ae45c9a5573e745803c3.1654086219.git.stefan@agner.ch>
+In-Reply-To: <24b77460dbfa2497ceb7a1611bf28b6eb88a1d74.1654086219.git.stefan@agner.ch>
+References: <24b77460dbfa2497ceb7a1611bf28b6eb88a1d74.1654086219.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Thu, 23 Sep 2021 23:43:31 +0200
 Subject: [PATCH] Revert "nvme: Correct the prps per page calculation method"
@@ -26,10 +26,10 @@ Cc: Wesley Sheng <wesleyshenggit@sina.com>
  1 file changed, 1 insertion(+), 1 deletion(-)
 
 diff --git a/drivers/nvme/nvme.c b/drivers/nvme/nvme.c
-index 6d0d3f3ca2..73db80a294 100644
+index 3c529a2fce..3bda491e12 100644
 --- a/drivers/nvme/nvme.c
 +++ b/drivers/nvme/nvme.c
-@@ -52,7 +52,7 @@ static int nvme_setup_prps(struct nvme_dev *dev, u64 *prp2,
+@@ -81,7 +81,7 @@ static int nvme_setup_prps(struct nvme_dev *dev, u64 *prp2,
  	u64 *prp_pool;
  	int length = total_len;
  	int i, nprps;
@@ -39,5 +39,5 @@ index 6d0d3f3ca2..73db80a294 100644
  
  	length -= (page_size - offset);
 -- 
-2.38.1
+2.36.1