Bump version to 6.5

Signed-off-by: Stefan Agner <stefan@agner.ch>

.dockerignore

@@ -3,5 +3,9 @@ buildroot/
 buildroot-external/
 buildroot-patches/
 
-# Ignore too
+# Release directory gets created using build scripts
 release/
+
+# Ignore hidden directories as well
+.git/
+.github/

.github/workflows/release.yml

@@ -29,8 +29,10 @@ jobs:
           fi
           if [ "" != "${tag_dev}" ]; then
             echo "Note: Release build with custom dev part: ${tag_dev}."
+            echo "::set-output name=version::${major}.${build}.${tag_dev}"
+          else
+            echo "::set-output name=version::${major}.${build}"
           fi
-          echo "::set-output name=version::${major}.${build}.${tag_dev}"
           echo "::set-output name=version_dev::${tag_dev}"
 
   build:

Documentation/kernel.md

@@ -5,15 +5,15 @@ Default Kernel tree: 5.10
 
 | Board | Version |
 |-------|---------|
-| Open Virtual Appliance | 5.10.37 |
+| Open Virtual Appliance | 5.10.70 |
 | Raspberry Pi | 5.10.17 |
 | Raspberry Pi 0-W | 5.10.17 |
 | Raspberry Pi 2 | 5.10.17 |
 | Raspberry Pi 3 | 5.10.17 |
 | Raspberry Pi 4 | 5.10.17 |
-| Tinker Board | 5.10.37 |
-| Odroid-C2 | 5.10.37 |
-| Odroid-C4 | 5.10.37 |
-| Odroid-N2 | 5.10.37 |
-| Odroid-XU4 | 5.10.37 |
-| Generic x86-64 | 5.10.37 |
+| Tinker Board | 5.10.70 |
+| Odroid-C2 | 5.10.70 |
+| Odroid-C4 | 5.10.70 |
+| Odroid-N2 | 5.10.70 |
+| Odroid-XU4 | 5.10.70 |
+| Generic x86-64 | 5.10.70 |

Documentation/partition.md

@@ -41,37 +41,28 @@ Sometime the bootloader part can look different because there can be firmware or
 The data partition is the only partition with real I/O. It will be expanded automatically at boot to the full size of the disk.
 
 
-## Using datactl to move the data partition.
+## Using CLI to move the data partition.
 
-In a Home Assistant OS installation, the data is stored on the `/mnt/data` partition of the SD card. This is the only read+write partition on the SD drive. Using the `datactl` move command, this partition can be moved off of the SD card onto an externally connected drive, leaving the rest of the read-only system on the SD.
+In a Home Assistant OS installation, the data is stored on the `/mnt/data` partition of the boot storage (typically the SD card). This is the only read/write partition on the boot storage. Using the `datadisk` move command, this partition can be moved to an externally connected drive, leaving the rest of the read-only system on the boot storage.
 
-The storage capacity of the external drive must be larger than the storage capacity of the existing SD card.
-
-The command needs to be run from the host console by either connecting a keyboard and monitor or making use of the [debug ssh access](https://developers.home-assistant.io/docs/operating-system/debugging/) over port 22222. The command will not work from within an SSH add-on container.
-
-Log in as `root` to get to the Home Assistant CLI and then enter `login` to continue to the host.
-
-Confirm your USB SSD/HD is connected and recognized using `fdisk -l`.
-
-With the drive connected, use the following command (replacing sdx with your drive, without a partition number):
+The storage capacity of the external drive must be larger than the storage capacity of the existing disk.
 
 ```sh
-$ datactl move /dev/sdx
+$ ha os datadisk move /dev/sdx
 ```
 
-Enter "yes" to confirm the operation. This will prepare the disk, however, the
-actual move will be running on next reboot. This will make the first boot significantly longer than usual; please be patient. Reboot with the following command:
+This will make a reboot which going significantly longer than usual; please be patient!
+
+For getting a list of supported detected devices which can be used by `datadisk`:
+
 ```sh
-$ ha host reboot
+$ ha os datadisk list
 ```
 
-Once complete, the external drive
-will contain the data and will need to be plugged in to successfully boot Home
-Assistant.
+## Using UI to move the data partition.
 
-## Check if the move was succesful.
-Within the Home Assistant interface you won't see if the move was succesful. To check this, go to your host console again (as described above) and enter:
-```sh
-$ systemctl status mnt-data.mount
-```
-If the data partition was moved to your USB drive you should see ```sh Active: active (mounted)  ``` in the output. Also, it will show, which drive got mounted as /mnt/data (```sh Where ``` and ```sh what ``` section of the output)
+__follow__
+
+
+## Check Power Supply Rating
+Using an USB attached SSD can draw quite some power. For instance on Raspberry Pi 3 the official Raspberry Pi power supply (PSU) only provides 2.5A which can be too tight. Use a power supply which can at least provide 3.5A. Alternatively use a powered USB hub. Connect the Hub to one of the USB slots of your Raspberry Pi, and connect the SSD to the Hub. The power supply that came with the Hub will power the attached device(s).

buildroot-external/board/asus/tinker/uboot-boot.ush

@@ -64,7 +64,7 @@ for BOOT_SLOT in "${BOOT_ORDER}"; do
     if test ${BOOT_A_LEFT} -gt 0; then
       setexpr BOOT_A_LEFT ${BOOT_A_LEFT} - 1
       echo "Trying to boot slot A, ${BOOT_A_LEFT} attempts remaining. Loading kernel ..."
-      if ext4load mmc ${devnum}:2 ${kernel_addr_r} zImage; then
+      if load mmc ${devnum}:2 ${kernel_addr_r} zImage; then
           setenv bootargs "${bootargs_hassos} ${bootargs_a} rauc.slot=A ${cmdline}"
       fi
     fi
@@ -72,7 +72,7 @@ for BOOT_SLOT in "${BOOT_ORDER}"; do
     if test ${BOOT_B_LEFT} -gt 0; then
       setexpr BOOT_B_LEFT ${BOOT_B_LEFT} - 1
       echo "Trying to boot slot B, ${BOOT_B_LEFT} attempts remaining. Loading kernel ..."
-      if ext4load mmc ${devnum}:4 ${kernel_addr_r} zImage; then
+      if load mmc ${devnum}:4 ${kernel_addr_r} zImage; then
           setenv bootargs "${bootargs_hassos} ${bootargs_b} rauc.slot=B ${cmdline}"
       fi
     fi

buildroot-external/board/hardkernel/kernel-amlogic.config

@@ -3818,10 +3818,10 @@ CONFIG_CEC_NOTIFIER=y
 CONFIG_MEDIA_CEC_SUPPORT=y
 # CONFIG_CEC_CH7322 is not set
 # CONFIG_CEC_CROS_EC is not set
-# CONFIG_CEC_MESON_AO is not set
-# CONFIG_CEC_MESON_G12A_AO is not set
-# CONFIG_CEC_GPIO is not set
-# CONFIG_USB_PULSE8_CEC is not set
+CONFIG_CEC_MESON_AO=m
+CONFIG_CEC_MESON_G12A_AO=m
+CONFIG_CEC_GPIO=m
+CONFIG_USB_PULSE8_CEC=m
 # CONFIG_USB_RAINSHADOW_CEC is not set
 CONFIG_MEDIA_SUPPORT=y
 CONFIG_MEDIA_SUPPORT_FILTER=y

buildroot-external/board/hardkernel/odroid-c2/uboot-boot.ush

@@ -71,7 +71,7 @@ for BOOT_SLOT in "${BOOT_ORDER}"; do
     if test ${BOOT_A_LEFT} -gt 0; then
       setexpr BOOT_A_LEFT ${BOOT_A_LEFT} - 1
       echo "Trying to boot slot A, ${BOOT_A_LEFT} attempts remaining. Loading kernel ..."
-      if ext4load mmc ${devnum}:5 ${kernel_addr_r} Image; then
+      if load mmc ${devnum}:5 ${kernel_addr_r} Image; then
           setenv bootargs "${bootargs_hassos} ${bootargs_a} rauc.slot=A ${cmdline}"
       fi
     fi
@@ -79,7 +79,7 @@ for BOOT_SLOT in "${BOOT_ORDER}"; do
     if test ${BOOT_B_LEFT} -gt 0; then
       setexpr BOOT_B_LEFT ${BOOT_B_LEFT} - 1
       echo "Trying to boot slot B, ${BOOT_B_LEFT} attempts remaining. Loading kernel ..."
-      if ext4load mmc ${devnum}:7 ${kernel_addr_r} Image; then
+      if load mmc ${devnum}:7 ${kernel_addr_r} Image; then
           setenv bootargs "${bootargs_hassos} ${bootargs_b} rauc.slot=B ${cmdline}"
       fi
     fi

buildroot-external/board/hardkernel/odroid-c4/uboot-boot.ush

@@ -71,7 +71,7 @@ for BOOT_SLOT in "${BOOT_ORDER}"; do
     if test ${BOOT_A_LEFT} -gt 0; then
       setexpr BOOT_A_LEFT ${BOOT_A_LEFT} - 1
       echo "Trying to boot slot A, ${BOOT_A_LEFT} attempts remaining. Loading kernel ..."
-      if ext4load mmc ${devnum}:5 ${kernel_addr_r} Image; then
+      if load mmc ${devnum}:5 ${kernel_addr_r} Image; then
           setenv bootargs "${bootargs_hassos} ${bootargs_a} rauc.slot=A ${cmdline}"
       fi
     fi
@@ -79,7 +79,7 @@ for BOOT_SLOT in "${BOOT_ORDER}"; do
     if test ${BOOT_B_LEFT} -gt 0; then
       setexpr BOOT_B_LEFT ${BOOT_B_LEFT} - 1
       echo "Trying to boot slot B, ${BOOT_B_LEFT} attempts remaining. Loading kernel ..."
-      if ext4load mmc ${devnum}:7 ${kernel_addr_r} Image; then
+      if load mmc ${devnum}:7 ${kernel_addr_r} Image; then
           setenv bootargs "${bootargs_hassos} ${bootargs_b} rauc.slot=B ${cmdline}"
       fi
     fi

buildroot-external/board/hardkernel/odroid-n2/uboot-boot.ush

@@ -76,7 +76,7 @@ for BOOT_SLOT in "${BOOT_ORDER}"; do
     if test ${BOOT_A_LEFT} -gt 0; then
       setexpr BOOT_A_LEFT ${BOOT_A_LEFT} - 1
       echo "Trying to boot slot A, ${BOOT_A_LEFT} attempts remaining. Loading kernel ..."
-      if ext4load mmc ${devnum}:5 ${kernel_addr_r} Image; then
+      if load mmc ${devnum}:5 ${kernel_addr_r} Image; then
           setenv bootargs "${bootargs_hassos} ${bootargs_a} rauc.slot=A ${cmdline}"
       fi
     fi
@@ -84,7 +84,7 @@ for BOOT_SLOT in "${BOOT_ORDER}"; do
     if test ${BOOT_B_LEFT} -gt 0; then
       setexpr BOOT_B_LEFT ${BOOT_B_LEFT} - 1
       echo "Trying to boot slot B, ${BOOT_B_LEFT} attempts remaining. Loading kernel ..."
-      if ext4load mmc ${devnum}:7 ${kernel_addr_r} Image; then
+      if load mmc ${devnum}:7 ${kernel_addr_r} Image; then
           setenv bootargs "${bootargs_hassos} ${bootargs_b} rauc.slot=B ${cmdline}"
       fi
     fi

buildroot-external/board/hardkernel/odroid-xu4/patches/linux/0001-ODROID-XU4-Update-hack-avoiding-the-invalid-temperat.patch

@@ -0,0 +1,61 @@
+From d6b82edb420c7df4fa8bb0924dae2476beb649a2 Mon Sep 17 00:00:00 2001
+Message-Id: <d6b82edb420c7df4fa8bb0924dae2476beb649a2.1622398359.git.stefan@agner.ch>
+From: "charles.park" <charles.park@hardkernel.com>
+Date: Fri, 1 Jun 2018 18:12:01 +0900
+Subject: [PATCH] ODROID-XU4: Update hack avoiding the invalid temperature by
+ TMU broken
+
+Change-Id: I6092834427950a50746535458e99bf7089212044
+---
+ drivers/thermal/thermal_helpers.c | 28 ++++++++++++++++++++++++++++
+ 1 file changed, 28 insertions(+)
+
+diff --git a/drivers/thermal/thermal_helpers.c b/drivers/thermal/thermal_helpers.c
+index c94bc824e5d3..2880126c5861 100644
+--- a/drivers/thermal/thermal_helpers.c
++++ b/drivers/thermal/thermal_helpers.c
+@@ -75,6 +75,10 @@ EXPORT_SYMBOL(get_thermal_instance);
+  *
+  * Return: On success returns 0, an error code otherwise
+  */
++
++#define	CRITICAL_TEMP	120000
++int thermal_zone_data[4] = { 0, };
++
+ int thermal_zone_get_temp(struct thermal_zone_device *tz, int *temp)
+ {
+ 	int ret = -EINVAL;
+@@ -108,6 +112,30 @@ int thermal_zone_get_temp(struct thermal_zone_device *tz, int *temp)
+ 			*temp = tz->emul_temperature;
+ 	}
+ 
++	/* save thermal_zone data */
++	if (!ret)
++		thermal_zone_data[tz->id] = *temp;
++	/*
++	 * This case is that the thermal sensor is broken.
++	 * That's not real temperature. Set the fake temperature value in order to
++	 * avoid reaching the ciritical temperature.
++	 */
++	if ((thermal_zone_data[tz->id] > CRITICAL_TEMP) && (tz->id != 4)) {
++		int i, broken_sensor = 0, correct_temp = 0;
++		for (i = 0; i < 4; i++) {
++			if ((thermal_zone_data[i] <= CRITICAL_TEMP) &&
++			    (correct_temp <= thermal_zone_data[i]))
++				correct_temp = thermal_zone_data[i];
++			if (thermal_zone_data[i] > CRITICAL_TEMP)
++				broken_sensor++;
++		}
++		/*
++		 * if all thermal sensor broken then critical temperature data send
++		 * for system poweroff.
++		 */
++		*temp = (broken_sensor == 4) ? CRITICAL_TEMP : correct_temp;
++	}
++
+ 	mutex_unlock(&tz->lock);
+ exit:
+ 	return ret;
+-- 
+2.31.1
+

buildroot-external/board/hardkernel/odroid-xu4/uboot-boot.ush

@@ -51,7 +51,7 @@ for BOOT_SLOT in "${BOOT_ORDER}"; do
     if test ${BOOT_A_LEFT} -gt 0; then
       setexpr BOOT_A_LEFT ${BOOT_A_LEFT} - 1
       echo "Trying to boot slot A, ${BOOT_A_LEFT} attempts remaining. Loading kernel ..."
-      if ext4load mmc ${devnum}:5 ${kernel_addr_r} zImage; then
+      if load mmc ${devnum}:5 ${kernel_addr_r} zImage; then
           setenv bootargs "${bootargs_hassos} ${bootargs_a} rauc.slot=A ${cmdline}"
       fi
     fi
@@ -59,7 +59,7 @@ for BOOT_SLOT in "${BOOT_ORDER}"; do
     if test ${BOOT_B_LEFT} -gt 0; then
       setexpr BOOT_B_LEFT ${BOOT_B_LEFT} - 1
       echo "Trying to boot slot B, ${BOOT_B_LEFT} attempts remaining. Loading kernel ..."
-      if ext4load mmc ${devnum}:7 ${kernel_addr_r} zImage; then
+      if load mmc ${devnum}:7 ${kernel_addr_r} zImage; then
           setenv bootargs "${bootargs_hassos} ${bootargs_b} rauc.slot=B ${cmdline}"
       fi
     fi

buildroot-external/board/hardkernel/patches/linux/0001-arm64-dts-meson-add-i2c3-rtc-nodes-and-rtc-aliases-t.patch

@@ -1,8 +1,8 @@
-From cdfb8eea4103e537898073dc3f7bf8f75cec5efb Mon Sep 17 00:00:00 2001
-Message-Id: <cdfb8eea4103e537898073dc3f7bf8f75cec5efb.1619725559.git.stefan@agner.ch>
+From c7825747afd8bb975dc918f28e4afe8058a518f3 Mon Sep 17 00:00:00 2001
+Message-Id: <c7825747afd8bb975dc918f28e4afe8058a518f3.1627311993.git.stefan@agner.ch>
 From: Christian Hewitt <christianshewitt@gmail.com>
 Date: Mon, 11 Jan 2021 13:58:31 +0000
-Subject: [PATCH 1/8] arm64: dts: meson: add i2c3/rtc nodes and rtc aliases to
+Subject: [PATCH 1/9] arm64: dts: meson: add i2c3/rtc nodes and rtc aliases to
  ODROID-N2 dtsi
 
 Enable the onboard pcf8563 rtc hardware on ODROID N2/N2+ boards via the
@@ -49,5 +49,5 @@ index 39a09661c5f6..b78be3e6974d 100644
  	pinctrl-0 = <&pwm_a_e_pins>;
  	pinctrl-names = "default";
 -- 
-2.31.1
+2.32.0
 

buildroot-external/board/hardkernel/patches/linux/0002-arm64-dts-meson-add-saradc-node-to-ODROID-N2-N2.patch

@@ -1,10 +1,20 @@
-From 8b2ab165b2ed529f74b242159648893d53272c24 Mon Sep 17 00:00:00 2001
-Message-Id: <8b2ab165b2ed529f74b242159648893d53272c24.1619725559.git.stefan@agner.ch>
-In-Reply-To: <cdfb8eea4103e537898073dc3f7bf8f75cec5efb.1619725559.git.stefan@agner.ch>
-References: <cdfb8eea4103e537898073dc3f7bf8f75cec5efb.1619725559.git.stefan@agner.ch>
+<<<<<<< HEAD:buildroot-external/board/hardkernel/patches/linux/5.9.16/0005-arm64-dts-meson-add-saradc-node-to-ODROID-N2-N2.patch
+From 3f2aecc668b172e0c91bf1bfdc78ee18a6bb6645 Mon Sep 17 00:00:00 2001
+Message-Id: <3f2aecc668b172e0c91bf1bfdc78ee18a6bb6645.1622055679.git.stefan@agner.ch>
+In-Reply-To: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agner.ch>
+References: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agner.ch>
 From: Hyeonki Hong <hhk7734@gmail.com>
 Date: Wed, 7 Apr 2021 04:26:08 +0000
-Subject: [PATCH 2/8] arm64: dts: meson: add saradc node to ODROID N2/N2+
+Subject: [PATCH 05/11] arm64: dts: meson: add saradc node to ODROID N2/N2+
+=======
+From ec3b1240b428c5652ccb7fdadad217a2ff8ab4db Mon Sep 17 00:00:00 2001
+Message-Id: <ec3b1240b428c5652ccb7fdadad217a2ff8ab4db.1627311993.git.stefan@agner.ch>
+In-Reply-To: <c7825747afd8bb975dc918f28e4afe8058a518f3.1627311993.git.stefan@agner.ch>
+References: <c7825747afd8bb975dc918f28e4afe8058a518f3.1627311993.git.stefan@agner.ch>
+From: Hyeonki Hong <hhk7734@gmail.com>
+Date: Wed, 7 Apr 2021 04:26:08 +0000
+Subject: [PATCH 2/9] arm64: dts: meson: add saradc node to ODROID N2/N2+
+>>>>>>> be3afe8b (Update to Linux 5.10.53 (#1475)):buildroot-external/board/hardkernel/patches/linux/5.10.53/0002-arm64-dts-meson-add-saradc-node-to-ODROID-N2-N2.patch
 
 Add the meson saradc node to the ODROID N2/N2+ common dtsi.
 
@@ -17,7 +27,11 @@ Link: https://lore.kernel.org/r/20210407042609.9736-3-christianshewitt@gmail.com
  1 file changed, 5 insertions(+)
 
 diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+<<<<<<< HEAD:buildroot-external/board/hardkernel/patches/linux/5.9.16/0005-arm64-dts-meson-add-saradc-node-to-ODROID-N2-N2.patch
+index 5927c4493f5a..194a437b4e3f 100644
+=======
 index b78be3e6974d..8a5e132c4b79 100644
+>>>>>>> be3afe8b (Update to Linux 5.10.53 (#1475)):buildroot-external/board/hardkernel/patches/linux/5.10.53/0002-arm64-dts-meson-add-saradc-node-to-ODROID-N2-N2.patch
 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
 +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
 @@ -508,6 +508,11 @@ &pwm_AO_cd {

buildroot-external/board/hardkernel/patches/linux/0003-arm64-dts-meson-add-GPIO-line-names-to-ODROID-N2-N2.patch

@@ -1,10 +1,20 @@
-From 602012d9081be7a54d2d6cee59035ae019dd3bb4 Mon Sep 17 00:00:00 2001
-Message-Id: <602012d9081be7a54d2d6cee59035ae019dd3bb4.1619725559.git.stefan@agner.ch>
-In-Reply-To: <cdfb8eea4103e537898073dc3f7bf8f75cec5efb.1619725559.git.stefan@agner.ch>
-References: <cdfb8eea4103e537898073dc3f7bf8f75cec5efb.1619725559.git.stefan@agner.ch>
+<<<<<<< HEAD:buildroot-external/board/hardkernel/patches/linux/5.9.16/0006-arm64-dts-meson-add-GPIO-line-names-to-ODROID-N2-N2.patch
+From d13c62fab2c91cacda74a9001ea6a6c7d8a9af39 Mon Sep 17 00:00:00 2001
+Message-Id: <d13c62fab2c91cacda74a9001ea6a6c7d8a9af39.1622055679.git.stefan@agner.ch>
+In-Reply-To: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agner.ch>
+References: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agner.ch>
 From: Hyeonki Hong <hhk7734@gmail.com>
 Date: Wed, 7 Apr 2021 04:26:09 +0000
-Subject: [PATCH 3/8] arm64: dts: meson: add GPIO line names to ODROID N2/N2+
+Subject: [PATCH 06/11] arm64: dts: meson: add GPIO line names to ODROID N2/N2+
+=======
+From 5ca49a58577f7e9e6f8e0b1cb7c97e756a0e921f Mon Sep 17 00:00:00 2001
+Message-Id: <5ca49a58577f7e9e6f8e0b1cb7c97e756a0e921f.1627311993.git.stefan@agner.ch>
+In-Reply-To: <c7825747afd8bb975dc918f28e4afe8058a518f3.1627311993.git.stefan@agner.ch>
+References: <c7825747afd8bb975dc918f28e4afe8058a518f3.1627311993.git.stefan@agner.ch>
+From: Hyeonki Hong <hhk7734@gmail.com>
+Date: Wed, 7 Apr 2021 04:26:09 +0000
+Subject: [PATCH 3/9] arm64: dts: meson: add GPIO line names to ODROID N2/N2+
+>>>>>>> be3afe8b (Update to Linux 5.10.53 (#1475)):buildroot-external/board/hardkernel/patches/linux/5.10.53/0003-arm64-dts-meson-add-GPIO-line-names-to-ODROID-N2-N2.patch
 
 Add GPIO line-name identifiers to the ODROID N2/N2+ common dtsi.
 
@@ -18,7 +28,11 @@ Link: https://lore.kernel.org/r/20210407042609.9736-4-christianshewitt@gmail.com
  1 file changed, 45 insertions(+)
 
 diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+<<<<<<< HEAD:buildroot-external/board/hardkernel/patches/linux/5.9.16/0006-arm64-dts-meson-add-GPIO-line-names-to-ODROID-N2-N2.patch
+index 194a437b4e3f..fe85aa6da460 100644
+=======
 index 8a5e132c4b79..41b2f9c96b5f 100644
+>>>>>>> be3afe8b (Update to Linux 5.10.53 (#1475)):buildroot-external/board/hardkernel/patches/linux/5.10.53/0003-arm64-dts-meson-add-GPIO-line-names-to-ODROID-N2-N2.patch
 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
 +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
 @@ -446,6 +446,51 @@ &frddr_c {

buildroot-external/board/hardkernel/patches/linux/0004-arm64-dts-meson-g12b-add-power-button-support.patch

@@ -1,10 +1,20 @@
-From 0a70fbc9a556737d3f70a1a194ba7be280b007c5 Mon Sep 17 00:00:00 2001
-Message-Id: <0a70fbc9a556737d3f70a1a194ba7be280b007c5.1619725559.git.stefan@agner.ch>
-In-Reply-To: <cdfb8eea4103e537898073dc3f7bf8f75cec5efb.1619725559.git.stefan@agner.ch>
-References: <cdfb8eea4103e537898073dc3f7bf8f75cec5efb.1619725559.git.stefan@agner.ch>
+<<<<<<< HEAD:buildroot-external/board/hardkernel/patches/linux/5.9.16/0007-arm64-dts-meson-g12b-add-power-button-support.patch
+From 25cd545d370b67f5e5e19d93484d378571526da2 Mon Sep 17 00:00:00 2001
+Message-Id: <25cd545d370b67f5e5e19d93484d378571526da2.1622055679.git.stefan@agner.ch>
+In-Reply-To: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agner.ch>
+References: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Mon, 11 Jan 2021 11:20:48 +0100
-Subject: [PATCH 4/8] arm64: dts: meson: g12b: add power button support
+Subject: [PATCH 07/11] arm64: dts: meson: g12b: add power button support
+=======
+From 70e65f906389f7236fe9ad8e1c05dedac0d1988b Mon Sep 17 00:00:00 2001
+Message-Id: <70e65f906389f7236fe9ad8e1c05dedac0d1988b.1627311993.git.stefan@agner.ch>
+In-Reply-To: <c7825747afd8bb975dc918f28e4afe8058a518f3.1627311993.git.stefan@agner.ch>
+References: <c7825747afd8bb975dc918f28e4afe8058a518f3.1627311993.git.stefan@agner.ch>
+From: Stefan Agner <stefan@agner.ch>
+Date: Mon, 11 Jan 2021 11:20:48 +0100
+Subject: [PATCH 4/9] arm64: dts: meson: g12b: add power button support
+>>>>>>> be3afe8b (Update to Linux 5.10.53 (#1475)):buildroot-external/board/hardkernel/patches/linux/5.10.53/0004-arm64-dts-meson-g12b-add-power-button-support.patch
 
 Add power button support on J2 pin 11 (GPIOX_3 on the SoC side). The
 GPIO is low active, e.g. when connecting with pin 9 (GND) a power
@@ -16,7 +26,11 @@ Signed-off-by: Stefan Agner <stefan@agner.ch>
  1 file changed, 11 insertions(+)
 
 diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+<<<<<<< HEAD:buildroot-external/board/hardkernel/patches/linux/5.9.16/0007-arm64-dts-meson-g12b-add-power-button-support.patch
+index fe85aa6da460..9b1541ee2273 100644
+=======
 index 41b2f9c96b5f..4b6bb7e74e25 100644
+>>>>>>> be3afe8b (Update to Linux 5.10.53 (#1475)):buildroot-external/board/hardkernel/patches/linux/5.10.53/0004-arm64-dts-meson-g12b-add-power-button-support.patch
 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
 +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
 @@ -39,6 +39,17 @@ emmc_pwrseq: emmc-pwrseq {

buildroot-external/board/hardkernel/patches/linux/0005-arm64-dts-meson-g12b-add-GPIO-fan-support.patch

@@ -1,10 +1,20 @@
-From 8a4a640d1b8dea977795de3f49b6ea3a791e401a Mon Sep 17 00:00:00 2001
-Message-Id: <8a4a640d1b8dea977795de3f49b6ea3a791e401a.1619725559.git.stefan@agner.ch>
-In-Reply-To: <cdfb8eea4103e537898073dc3f7bf8f75cec5efb.1619725559.git.stefan@agner.ch>
-References: <cdfb8eea4103e537898073dc3f7bf8f75cec5efb.1619725559.git.stefan@agner.ch>
+<<<<<<< HEAD:buildroot-external/board/hardkernel/patches/linux/5.9.16/0008-arm64-dts-meson-g12b-add-GPIO-fan-support.patch
+From b94a0698f21a2d8f6623b69fc17fe9491bc22a9b Mon Sep 17 00:00:00 2001
+Message-Id: <b94a0698f21a2d8f6623b69fc17fe9491bc22a9b.1622055679.git.stefan@agner.ch>
+In-Reply-To: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agner.ch>
+References: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Mon, 11 Jan 2021 11:38:54 +0100
-Subject: [PATCH 5/8] arm64: dts: meson: g12b: add GPIO fan support
+Subject: [PATCH 08/11] arm64: dts: meson: g12b: add GPIO fan support
+=======
+From 86d9151effff69d2a8fc2027a31dd60bd8c6eb05 Mon Sep 17 00:00:00 2001
+Message-Id: <86d9151effff69d2a8fc2027a31dd60bd8c6eb05.1627311993.git.stefan@agner.ch>
+In-Reply-To: <c7825747afd8bb975dc918f28e4afe8058a518f3.1627311993.git.stefan@agner.ch>
+References: <c7825747afd8bb975dc918f28e4afe8058a518f3.1627311993.git.stefan@agner.ch>
+From: Stefan Agner <stefan@agner.ch>
+Date: Mon, 11 Jan 2021 11:38:54 +0100
+Subject: [PATCH 5/9] arm64: dts: meson: g12b: add GPIO fan support
+>>>>>>> be3afe8b (Update to Linux 5.10.53 (#1475)):buildroot-external/board/hardkernel/patches/linux/5.10.53/0005-arm64-dts-meson-g12b-add-GPIO-fan-support.patch
 
 Add simple GPIO fan node to support a fan on GPIO J8. Unfortunately the
 pad used to control the fan does not support real PWM, hence the RPM
@@ -16,7 +26,11 @@ Signed-off-by: Stefan Agner <stefan@agner.ch>
  1 file changed, 11 insertions(+)
 
 diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+<<<<<<< HEAD:buildroot-external/board/hardkernel/patches/linux/5.9.16/0008-arm64-dts-meson-g12b-add-GPIO-fan-support.patch
+index 9b1541ee2273..8ad7c3ee1aa3 100644
+=======
 index 4b6bb7e74e25..e8a3ede698b5 100644
+>>>>>>> be3afe8b (Update to Linux 5.10.53 (#1475)):buildroot-external/board/hardkernel/patches/linux/5.10.53/0005-arm64-dts-meson-g12b-add-GPIO-fan-support.patch
 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
 +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
 @@ -39,6 +39,17 @@ emmc_pwrseq: emmc-pwrseq {

buildroot-external/board/hardkernel/patches/linux/0006-arm64-dts-meson-g12b-odroid-n2-add-fan-as-cooling-de.patch

@@ -1,10 +1,20 @@
-From eee30c74e72b6092b5e30c4744a4f1d7d9526403 Mon Sep 17 00:00:00 2001
-Message-Id: <eee30c74e72b6092b5e30c4744a4f1d7d9526403.1619725559.git.stefan@agner.ch>
-In-Reply-To: <cdfb8eea4103e537898073dc3f7bf8f75cec5efb.1619725559.git.stefan@agner.ch>
-References: <cdfb8eea4103e537898073dc3f7bf8f75cec5efb.1619725559.git.stefan@agner.ch>
+<<<<<<< HEAD:buildroot-external/board/hardkernel/patches/linux/5.9.16/0009-arm64-dts-meson-g12b-odroid-n2-add-fan-as-cooling-de.patch
+From 4d9f93dbdc93e83ba8ddf01893b3c29cd11a87f9 Mon Sep 17 00:00:00 2001
+Message-Id: <4d9f93dbdc93e83ba8ddf01893b3c29cd11a87f9.1622055679.git.stefan@agner.ch>
+In-Reply-To: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agner.ch>
+References: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Mon, 11 Jan 2021 15:53:55 +0100
-Subject: [PATCH 6/8] arm64: dts: meson: g12b: odroid-n2: add fan as cooling
+Subject: [PATCH 09/11] arm64: dts: meson: g12b: odroid-n2: add fan as cooling
+=======
+From f1120f132dbdf2e7f7acf328de55bbdce877d882 Mon Sep 17 00:00:00 2001
+Message-Id: <f1120f132dbdf2e7f7acf328de55bbdce877d882.1627311993.git.stefan@agner.ch>
+In-Reply-To: <c7825747afd8bb975dc918f28e4afe8058a518f3.1627311993.git.stefan@agner.ch>
+References: <c7825747afd8bb975dc918f28e4afe8058a518f3.1627311993.git.stefan@agner.ch>
+From: Stefan Agner <stefan@agner.ch>
+Date: Mon, 11 Jan 2021 15:53:55 +0100
+Subject: [PATCH 6/9] arm64: dts: meson: g12b: odroid-n2: add fan as cooling
+>>>>>>> be3afe8b (Update to Linux 5.10.53 (#1475)):buildroot-external/board/hardkernel/patches/linux/5.10.53/0006-arm64-dts-meson-g12b-odroid-n2-add-fan-as-cooling-de.patch
  device
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
@@ -21,7 +31,11 @@ Signed-off-by: Stefan Agner <stefan@agner.ch>
  1 file changed, 38 insertions(+)
 
 diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+<<<<<<< HEAD:buildroot-external/board/hardkernel/patches/linux/5.9.16/0009-arm64-dts-meson-g12b-odroid-n2-add-fan-as-cooling-de.patch
+index 8ad7c3ee1aa3..c4052293ea0d 100644
+=======
 index e8a3ede698b5..dd345c6aa4b5 100644
+>>>>>>> be3afe8b (Update to Linux 5.10.53 (#1475)):buildroot-external/board/hardkernel/patches/linux/5.10.53/0006-arm64-dts-meson-g12b-odroid-n2-add-fan-as-cooling-de.patch
 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
 +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
 @@ -388,6 +388,44 @@ &clkc_audio {

buildroot-external/board/hardkernel/patches/linux/0007-arm64-dts-meson-add-uart_A-node.patch

@@ -1,10 +1,20 @@
-From b10ae8fd3bef195eda4a30bc5f3995ca13b6cffd Mon Sep 17 00:00:00 2001
-Message-Id: <b10ae8fd3bef195eda4a30bc5f3995ca13b6cffd.1619725559.git.stefan@agner.ch>
-In-Reply-To: <cdfb8eea4103e537898073dc3f7bf8f75cec5efb.1619725559.git.stefan@agner.ch>
-References: <cdfb8eea4103e537898073dc3f7bf8f75cec5efb.1619725559.git.stefan@agner.ch>
+<<<<<<< HEAD:buildroot-external/board/hardkernel/patches/linux/5.9.16/0010-arm64-dts-meson-add-uart_A-node.patch
+From 1eeec94aa6dd6f9900e6213025916eb85f6b3b62 Mon Sep 17 00:00:00 2001
+Message-Id: <1eeec94aa6dd6f9900e6213025916eb85f6b3b62.1622055679.git.stefan@agner.ch>
+In-Reply-To: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agner.ch>
+References: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agner.ch>
 From: Hyeonki Hong <hhk7734@gmail.com>
 Date: Fri, 27 Mar 2020 17:05:22 +0900
-Subject: [PATCH 7/8] arm64: dts: meson: add uart_A node
+Subject: [PATCH 10/11] arm64: dts: meson: add uart_A node
+=======
+From dcaf2dc71dd62487eb37561682934414a5795e0e Mon Sep 17 00:00:00 2001
+Message-Id: <dcaf2dc71dd62487eb37561682934414a5795e0e.1627311993.git.stefan@agner.ch>
+In-Reply-To: <c7825747afd8bb975dc918f28e4afe8058a518f3.1627311993.git.stefan@agner.ch>
+References: <c7825747afd8bb975dc918f28e4afe8058a518f3.1627311993.git.stefan@agner.ch>
+From: Hyeonki Hong <hhk7734@gmail.com>
+Date: Fri, 27 Mar 2020 17:05:22 +0900
+Subject: [PATCH 7/9] arm64: dts: meson: add uart_A node
+>>>>>>> be3afe8b (Update to Linux 5.10.53 (#1475)):buildroot-external/board/hardkernel/patches/linux/5.10.53/0007-arm64-dts-meson-add-uart_A-node.patch
 
 The UART_A is available through J3 pin 8/10 and documented to be
 available as UART by default.
@@ -15,7 +25,11 @@ Signed-off-by: Stefan Agner <stefan@agner.ch>
  1 file changed, 7 insertions(+)
 
 diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+<<<<<<< HEAD:buildroot-external/board/hardkernel/patches/linux/5.9.16/0010-arm64-dts-meson-add-uart_A-node.patch
+index c4052293ea0d..38a996ed3e19 100644
+=======
 index dd345c6aa4b5..cec346178e3d 100644
+>>>>>>> be3afe8b (Update to Linux 5.10.53 (#1475)):buildroot-external/board/hardkernel/patches/linux/5.10.53/0007-arm64-dts-meson-add-uart_A-node.patch
 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
 +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
 @@ -12,6 +12,7 @@

buildroot-external/board/hardkernel/patches/linux/0008-arm64-dts-meson-add-i2c2-node-to-ODROID-N2-N2.patch

@@ -1,10 +1,20 @@
-From aea42d4a9a307438bf7099aee38daedac2bd5044 Mon Sep 17 00:00:00 2001
-Message-Id: <aea42d4a9a307438bf7099aee38daedac2bd5044.1619725559.git.stefan@agner.ch>
-In-Reply-To: <cdfb8eea4103e537898073dc3f7bf8f75cec5efb.1619725559.git.stefan@agner.ch>
-References: <cdfb8eea4103e537898073dc3f7bf8f75cec5efb.1619725559.git.stefan@agner.ch>
+<<<<<<< HEAD:buildroot-external/board/hardkernel/patches/linux/5.9.16/0011-arm64-dts-meson-add-i2c2-node-to-ODROID-N2-N2.patch
+From 400fce2e1eaab6d04f542eaa0fe3b53fb9d79d82 Mon Sep 17 00:00:00 2001
+Message-Id: <400fce2e1eaab6d04f542eaa0fe3b53fb9d79d82.1622055679.git.stefan@agner.ch>
+In-Reply-To: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agner.ch>
+References: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Thu, 29 Apr 2021 21:32:43 +0200
-Subject: [PATCH 8/8] arm64: dts: meson: add i2c2 node to ODROID N2/N2+
+Subject: [PATCH 11/11] arm64: dts: meson: add i2c2 node to ODROID N2/N2+
+=======
+From d5d2d8b9eb93eab85af12f1844975903a7c5a879 Mon Sep 17 00:00:00 2001
+Message-Id: <d5d2d8b9eb93eab85af12f1844975903a7c5a879.1627311993.git.stefan@agner.ch>
+In-Reply-To: <c7825747afd8bb975dc918f28e4afe8058a518f3.1627311993.git.stefan@agner.ch>
+References: <c7825747afd8bb975dc918f28e4afe8058a518f3.1627311993.git.stefan@agner.ch>
+From: Stefan Agner <stefan@agner.ch>
+Date: Thu, 29 Apr 2021 21:32:43 +0200
+Subject: [PATCH 8/9] arm64: dts: meson: add i2c2 node to ODROID N2/N2+
+>>>>>>> be3afe8b (Update to Linux 5.10.53 (#1475)):buildroot-external/board/hardkernel/patches/linux/5.10.53/0008-arm64-dts-meson-add-i2c2-node-to-ODROID-N2-N2.patch
 
 The J2 connectors pinout documents "I2C.SDA0/SCL0" on pin 3 and 5, which
 are connected to GPIOX_17/18. This GPIO allow to mux I2C to the second
@@ -16,7 +26,11 @@ Signed-off-by: Stefan Agner <stefan@agner.ch>
  1 file changed, 6 insertions(+)
 
 diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+<<<<<<< HEAD:buildroot-external/board/hardkernel/patches/linux/5.9.16/0011-arm64-dts-meson-add-i2c2-node-to-ODROID-N2-N2.patch
+index 38a996ed3e19..45a8998c4a3a 100644
+=======
 index cec346178e3d..f1c3356c78a0 100644
+>>>>>>> be3afe8b (Update to Linux 5.10.53 (#1475)):buildroot-external/board/hardkernel/patches/linux/5.10.53/0008-arm64-dts-meson-add-i2c2-node-to-ODROID-N2-N2.patch
 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
 +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
 @@ -586,6 +586,12 @@ &ir {

buildroot-external/board/hardkernel/patches/linux/0009-Revert-of-fdt-Make-sure-no-map-does-not-remove-alrea.patch

@@ -0,0 +1,52 @@
+From 19c34c0ceb6302b07e1017c426796c4cf7322d13 Mon Sep 17 00:00:00 2001
+Message-Id: <19c34c0ceb6302b07e1017c426796c4cf7322d13.1627311993.git.stefan@agner.ch>
+In-Reply-To: <c7825747afd8bb975dc918f28e4afe8058a518f3.1627311993.git.stefan@agner.ch>
+References: <c7825747afd8bb975dc918f28e4afe8058a518f3.1627311993.git.stefan@agner.ch>
+From: Stefan Agner <stefan@agner.ch>
+Date: Mon, 26 Jul 2021 16:59:08 +0200
+Subject: [PATCH 9/9] Revert "of/fdt: Make sure no-map does not remove already
+ reserved regions"
+
+U-Boot on Hardkernel ODROID-N2 adds fdt "memreserve" entries alongside
+the reserved-memory nodes present in upstream Linux. This causes
+reserving memory with the no-map flag to fail:
+[    0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'secmon@5000000': base 0x0000000005000000, size 3 MiB
+
+This seems to cause kernel crashes such as:
+[129988.642342] SError Interrupt on CPU4, code 0xbf000000 -- SError
+
+Restore the bahavior of Linux kernel 5.9 and older and don't fail
+updating the mapping with no-map.
+
+This reverts commit 8a5a75e5e9e55de1cef5d83ca3589cb4899193ef.
+
+Signed-off-by: Stefan Agner <stefan@agner.ch>
+---
+ drivers/of/fdt.c | 10 +---------
+ 1 file changed, 1 insertion(+), 9 deletions(-)
+
+diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
+index 57ff31b6b1e4..7ef2246e0b1e 100644
+--- a/drivers/of/fdt.c
++++ b/drivers/of/fdt.c
+@@ -1149,16 +1149,8 @@ int __init __weak early_init_dt_mark_hotplug_memory_arch(u64 base, u64 size)
+ int __init __weak early_init_dt_reserve_memory_arch(phys_addr_t base,
+ 					phys_addr_t size, bool nomap)
+ {
+-	if (nomap) {
+-		/*
+-		 * If the memory is already reserved (by another region), we
+-		 * should not allow it to be marked nomap.
+-		 */
+-		if (memblock_is_region_reserved(base, size))
+-			return -EBUSY;
+-
++	if (nomap)
+ 		return memblock_mark_nomap(base, size);
+-	}
+ 	return memblock_reserve(base, size);
+ }
+ 
+-- 
+2.32.0
+

buildroot-external/board/pc/barebox.config

@@ -6,6 +6,5 @@ CONFIG_DRIVER_SERIAL_EFI_STDIO=y
 # CONFIG_SPI is not set
 CONFIG_DISK=y
 CONFIG_DISK_WRITE=y
-CONFIG_CLOCKSOURCE_EFI=y
 CONFIG_FS_EFI=y
 CONFIG_FS_EFIVARFS=y

buildroot-external/board/pc/generic-x86-64/kernel.config

@@ -23,3 +23,5 @@ CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ACPI=y
 CONFIG_MMC_SDHCI_PCI=y
 CONFIG_X86_INTEL_LPSS=y
+
+CONFIG_THINKPAD_ACPI=m

buildroot-external/board/pc/ova/hassos-hook.sh

@@ -10,7 +10,7 @@ function hassos_pre_image() {
     cp "${BINARIES_DIR}/barebox.bin" "${BOOT_DATA}/EFI/BOOT/BOOTx64.EFI"
     cp "${BR2_EXTERNAL_HASSOS_PATH}/bootloader/barebox-state-efi.dtb" "${BOOT_DATA}/EFI/barebox/state.dtb"
 
-    echo "console=tty1" > "${BOOT_DATA}/cmdline.txt"
+    echo "console=ttyS0 console=tty1" > "${BOOT_DATA}/cmdline.txt"
 }
 
 

buildroot-external/board/pc/ova/kernel.config

@@ -25,6 +25,14 @@ CONFIG_VIRTIO_MMIO=y
 CONFIG_SCSI_VIRTIO=y
 CONFIG_HW_RANDOM_VIRTIO=y
 
+# These options are needed for virtio-fs
+CONFIG_FUSE_FS=y
+CONFIG_VIRTIO_FS=y
+CONFIG_DAX=y
+CONFIG_FS_DAX=y
+CONFIG_DAX_DRIVER=y
+CONFIG_ZONE_DEVICE=y
+
 CONFIG_FUSION=y
 CONFIG_FUSION_SPI=y
 CONFIG_FUSION_SAS=y

buildroot-external/board/raspberrypi/patches/uboot/0001-rpi-Use-CONFIG_OF_BOARD-instead-of-CONFIG_EMBED.patch

@@ -1,8 +1,8 @@
-From 76cd0b31510f2019e411593e1a177ca8280b56b3 Mon Sep 17 00:00:00 2001
-Message-Id: <76cd0b31510f2019e411593e1a177ca8280b56b3.1619686343.git.stefan@agner.ch>
+From 9cb97076d98f7f68534abb3d1f596644ae730841 Mon Sep 17 00:00:00 2001
+Message-Id: <9cb97076d98f7f68534abb3d1f596644ae730841.1632740631.git.stefan@agner.ch>
 From: Pascal Vizeli <pvizeli@syshack.ch>
 Date: Tue, 10 Dec 2019 09:48:46 +0000
-Subject: [PATCH 1/2] rpi: Use CONFIG_OF_BOARD instead of CONFIG_EMBED
+Subject: [PATCH 1/5] rpi: Use CONFIG_OF_BOARD instead of CONFIG_EMBED
 
 Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch>
 ---
@@ -79,5 +79,5 @@ index 78638105f7..06b390d907 100644
  CONFIG_SYS_RELOC_GD_ENV_ADDR=y
  CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 -- 
-2.31.1
+2.33.0
 

buildroot-external/board/raspberrypi/patches/uboot/0002-raspberrypi-Disable-simple-framebuffer-support.patch

@@ -1,10 +1,10 @@
-From 8c11937b388dfafcdff27914d361532dc805245f Mon Sep 17 00:00:00 2001
-Message-Id: <8c11937b388dfafcdff27914d361532dc805245f.1619686343.git.stefan@agner.ch>
-In-Reply-To: <76cd0b31510f2019e411593e1a177ca8280b56b3.1619686343.git.stefan@agner.ch>
-References: <76cd0b31510f2019e411593e1a177ca8280b56b3.1619686343.git.stefan@agner.ch>
+From 69ac2930e69ca876f8da95d80f4a1cb8cc23bb6a Mon Sep 17 00:00:00 2001
+Message-Id: <69ac2930e69ca876f8da95d80f4a1cb8cc23bb6a.1632740631.git.stefan@agner.ch>
+In-Reply-To: <9cb97076d98f7f68534abb3d1f596644ae730841.1632740631.git.stefan@agner.ch>
+References: <9cb97076d98f7f68534abb3d1f596644ae730841.1632740631.git.stefan@agner.ch>
 From: Florin Sarbu <florin@balena.io>
 Date: Thu, 12 Sep 2019 12:31:31 +0200
-Subject: [PATCH 2/2] raspberrypi: Disable simple framebuffer support
+Subject: [PATCH 2/5] raspberrypi: Disable simple framebuffer support
 
 On 4.19 kernels this u-boot driver clashes with bcm2708_fb.
 So let's disable it from here so that we have bcm2708_fb
@@ -61,5 +61,5 @@ index 834f1cd236..19a0d611c4 100644
  #ifdef CONFIG_CMD_USB
  #define CONFIG_TFTP_TSIZE
 -- 
-2.31.1
+2.33.0
 

buildroot-external/board/raspberrypi/patches/uboot/0003-ARM-bcm283x-change-the-virtual-address-of-the-XHCI-P.patch

@@ -0,0 +1,49 @@
+From 72619dd5d0be59e702fd7b7090916ee688c34180 Mon Sep 17 00:00:00 2001
+Message-Id: <72619dd5d0be59e702fd7b7090916ee688c34180.1632740631.git.stefan@agner.ch>
+In-Reply-To: <9cb97076d98f7f68534abb3d1f596644ae730841.1632740631.git.stefan@agner.ch>
+References: <9cb97076d98f7f68534abb3d1f596644ae730841.1632740631.git.stefan@agner.ch>
+From: Marek Szyprowski <m.szyprowski@samsung.com>
+Date: Thu, 17 Jun 2021 11:22:03 +0200
+Subject: [PATCH 3/5] ARM: bcm283x: change the virtual address of the XHCI PCI
+ device base
+
+Move the XHCI PCI device base up in the virtual address space. This fixes
+initialization failure observed with newer Raspberry Pi firmware, later
+than 63b1922311 ("firmware: arm_loader: Update armstubs with those from
+PR 117). It looks that chosing 0xff800000 as the XHCI PCI device base
+conflicts with the updated ARM/VideoCore firmware.
+
+This also requires to reduce the size of the mapped PCI device region
+from 8MiB to 4MiB to fit into 32bit address space. This is still enough
+for the XHCI PCI device.
+
+Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
+---
+ arch/arm/mach-bcm283x/init.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/arch/arm/mach-bcm283x/init.c b/arch/arm/mach-bcm283x/init.c
+index 49027ce0a2..9803499985 100644
+--- a/arch/arm/mach-bcm283x/init.c
++++ b/arch/arm/mach-bcm283x/init.c
+@@ -14,7 +14,7 @@
+ #include <asm/global_data.h>
+ 
+ #define BCM2711_RPI4_PCIE_XHCI_MMIO_PHYS	0x600000000UL
+-#define BCM2711_RPI4_PCIE_XHCI_MMIO_SIZE	0x800000UL
++#define BCM2711_RPI4_PCIE_XHCI_MMIO_SIZE	0x400000UL
+ 
+ #ifdef CONFIG_ARM64
+ #include <asm/armv8/mmu.h>
+@@ -148,7 +148,7 @@ int mach_cpu_init(void)
+ 
+ #ifdef CONFIG_ARMV7_LPAE
+ #ifdef CONFIG_TARGET_RPI_4_32B
+-#define BCM2711_RPI4_PCIE_XHCI_MMIO_VIRT	0xff800000UL
++#define BCM2711_RPI4_PCIE_XHCI_MMIO_VIRT	0xffc00000UL
+ #include <addr_map.h>
+ #include <asm/system.h>
+ 
+-- 
+2.33.0
+

buildroot-external/board/raspberrypi/patches/uboot/0004-IOMUX-Fix-buffer-overflow-in-iomux_replace_device.patch

@@ -0,0 +1,44 @@
+From 0a33e4e03b9266818d6f0a6d566bf12be55c657c Mon Sep 17 00:00:00 2001
+Message-Id: <0a33e4e03b9266818d6f0a6d566bf12be55c657c.1632740631.git.stefan@agner.ch>
+In-Reply-To: <9cb97076d98f7f68534abb3d1f596644ae730841.1632740631.git.stefan@agner.ch>
+References: <9cb97076d98f7f68534abb3d1f596644ae730841.1632740631.git.stefan@agner.ch>
+From: Yuichiro Goto <goto@k-tech.co.jp>
+Date: Mon, 26 Apr 2021 08:08:03 +0900
+Subject: [PATCH 4/5] IOMUX: Fix buffer overflow in iomux_replace_device()
+
+Use of strcat() against an uninitialized buffer would lead
+to buffer overflow. This patch fixes it.
+
+Fixes: 694cd5618c ("IOMUX: Introduce iomux_replace_device()")
+Signed-off-by: Yuichiro Goto <goto@k-tech.co.jp>
+Cc: Peter Robinson <pbrobinson@gmail.com>
+Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+Cc: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
+Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+Tested-by: Peter Robinson <pbrobinson@gmail.com>
+---
+ common/iomux.c | 8 ++++++--
+ 1 file changed, 6 insertions(+), 2 deletions(-)
+
+diff --git a/common/iomux.c b/common/iomux.c
+index b9088aa3b5..c428f7110a 100644
+--- a/common/iomux.c
++++ b/common/iomux.c
+@@ -158,8 +158,12 @@ int iomux_replace_device(const int console, const char *old, const char *new)
+ 			return -ENOMEM;
+ 		}
+ 
+-		strcat(tmp, ",");
+-		strcat(tmp, name);
++		if (arg) {
++			strcat(tmp, ",");
++			strcat(tmp, name);
++		}
++		else
++			strcpy(tmp, name);
+ 
+ 		arg = tmp;
+ 		size = strlen(tmp) + 1;
+-- 
+2.33.0
+

buildroot-external/board/raspberrypi/patches/uboot/0005-usb-xhci-reset-endpoint-on-USB-stall.patch

@@ -0,0 +1,87 @@
+From 194a2cb0e38c8684e9c98aa66ba3d3a838fce9d6 Mon Sep 17 00:00:00 2001
+Message-Id: <194a2cb0e38c8684e9c98aa66ba3d3a838fce9d6.1632740631.git.stefan@agner.ch>
+In-Reply-To: <9cb97076d98f7f68534abb3d1f596644ae730841.1632740631.git.stefan@agner.ch>
+References: <9cb97076d98f7f68534abb3d1f596644ae730841.1632740631.git.stefan@agner.ch>
+From: Stefan Agner <stefan@agner.ch>
+Date: Mon, 27 Sep 2021 12:28:04 +0200
+Subject: [PATCH 5/5] usb: xhci: reset endpoint on USB stall
+
+There are devices which cause a USB stall when trying to read strings.
+Specifically Arduino Mega R3 stalls when trying to read the product
+string.
+
+The stall currently remains unhandled, and subsequent retries submit new
+transfers on a stopped endpoint which ultimately cause a crash in
+abort_td():
+WARN halted endpoint, queueing URB anyway.
+XHCI control transfer timed out, aborting...
+Unexpected XHCI event TRB, skipping... (3affe040 00000000 13000000 02008401)
+BUG at drivers/usb/host/xhci-ring.c:505/abort_td()!
+BUG!
+resetting ...
+
+Linux seems to be able to recover from the stall by issuing a
+TRB_RESET_EP command.
+
+Introduce reset_ep() which issues a TRB_RESET_EP followed by setting the
+transfer ring dequeue pointer via TRB_SET_DEQ. This allows to properly
+recover from a USB stall error and continue communicating with the USB
+device.
+
+Signed-off-by: Stefan Agner <stefan@agner.ch>
+---
+ drivers/usb/host/xhci-ring.c | 31 +++++++++++++++++++++++++++++++
+ 1 file changed, 31 insertions(+)
+
+diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
+index 46c137f857..667e9fbf5e 100644
+--- a/drivers/usb/host/xhci-ring.c
++++ b/drivers/usb/host/xhci-ring.c
+@@ -481,6 +481,33 @@ union xhci_trb *xhci_wait_for_event(struct xhci_ctrl *ctrl, trb_type expected)
+ 	BUG();
+ }
+ 
++/*
++ * Issue reset endpoint command for an endpoint. This is required to recover
++ * a halted endpoint (e.g. due to a stall error).
++ */
++static void reset_ep(struct usb_device *udev, int ep_index)
++{
++	struct xhci_ctrl *ctrl = xhci_get_ctrl(udev);
++	struct xhci_ring *ring =  ctrl->devs[udev->slot_id]->eps[ep_index].ring;
++	union xhci_trb *event;
++	u32 field;
++
++	printf("Resetting EP...\n");
++	xhci_queue_command(ctrl, NULL, udev->slot_id, ep_index, TRB_RESET_EP);
++	event = xhci_wait_for_event(ctrl, TRB_COMPLETION);
++	field = le32_to_cpu(event->trans_event.flags);
++	BUG_ON(TRB_TO_SLOT_ID(field) != udev->slot_id);
++	xhci_acknowledge_event(ctrl);
++
++	xhci_queue_command(ctrl, (void *)((uintptr_t)ring->enqueue |
++		ring->cycle_state), udev->slot_id, ep_index, TRB_SET_DEQ);
++	event = xhci_wait_for_event(ctrl, TRB_COMPLETION);
++	BUG_ON(TRB_TO_SLOT_ID(le32_to_cpu(event->event_cmd.flags))
++		!= udev->slot_id || GET_COMP_CODE(le32_to_cpu(
++		event->event_cmd.status)) != COMP_SUCCESS);
++	xhci_acknowledge_event(ctrl);
++}
++
+ /*
+  * Stops transfer processing for an endpoint and throws away all unprocessed
+  * TRBs by setting the xHC's dequeue pointer to our enqueue pointer. The next
+@@ -931,6 +958,10 @@ int xhci_ctrl_tx(struct usb_device *udev, unsigned long pipe,
+ 
+ 	record_transfer_result(udev, event, length);
+ 	xhci_acknowledge_event(ctrl);
++	if (udev->status == USB_ST_STALLED) {
++		reset_ep(udev, ep_index);
++		return -EPIPE;
++	}
+ 
+ 	/* Invalidate buffer to make it available to usb-core */
+ 	if (length > 0)
+-- 
+2.33.0
+

buildroot-external/board/raspberrypi/rootfs-overlay/etc/sysctl.d/98-rpi.conf

@@ -0,0 +1 @@
+vm.min_free_kbytes = 16384

buildroot-external/board/raspberrypi/uboot-boot.ush

@@ -38,7 +38,7 @@ for BOOT_SLOT in "${BOOT_ORDER}"; do
     if test ${BOOT_A_LEFT} -gt 0; then
       setexpr BOOT_A_LEFT ${BOOT_A_LEFT} - 1
       echo "Trying to boot slot A, ${BOOT_A_LEFT} attempts remaining. Loading kernel ..."
-      if ext4load ${devtype} ${devnum}:2 ${kernel_addr_r} zImage; then
+      if load ${devtype} ${devnum}:2 ${kernel_addr_r} zImage; then
           setenv bootargs "${bootargs_hassos} ${bootargs_rpi} ${bootargs_a} rauc.slot=A"
       fi
     fi
@@ -46,7 +46,7 @@ for BOOT_SLOT in "${BOOT_ORDER}"; do
     if test ${BOOT_B_LEFT} -gt 0; then
       setexpr BOOT_B_LEFT ${BOOT_B_LEFT} - 1
       echo "Trying to boot slot B, ${BOOT_B_LEFT} attempts remaining. Loading kernel ..."
-      if ext4load ${devtype} ${devnum}:4 ${kernel_addr_r} zImage; then
+      if load ${devtype} ${devnum}:4 ${kernel_addr_r} zImage; then
           setenv bootargs "${bootargs_hassos} ${bootargs_rpi} ${bootargs_b} rauc.slot=B"
       fi
     fi

buildroot-external/board/raspberrypi/uboot-boot64.ush

@@ -38,7 +38,7 @@ for BOOT_SLOT in "${BOOT_ORDER}"; do
     if test ${BOOT_A_LEFT} -gt 0; then
       setexpr BOOT_A_LEFT ${BOOT_A_LEFT} - 1
       echo "Trying to boot slot A, ${BOOT_A_LEFT} attempts remaining. Loading kernel ..."
-      if ext4load ${devtype} ${devnum}:2 ${kernel_addr_r} Image; then
+      if load ${devtype} ${devnum}:2 ${kernel_addr_r} Image; then
           setenv bootargs "${bootargs_hassos} ${bootargs_rpi} ${bootargs_a} rauc.slot=A"
       fi
     fi
@@ -46,7 +46,7 @@ for BOOT_SLOT in "${BOOT_ORDER}"; do
     if test ${BOOT_B_LEFT} -gt 0; then
       setexpr BOOT_B_LEFT ${BOOT_B_LEFT} - 1
       echo "Trying to boot slot B, ${BOOT_B_LEFT} attempts remaining. Loading kernel ..."
-      if ext4load ${devtype} ${devnum}:4 ${kernel_addr_r} Image; then
+      if load ${devtype} ${devnum}:4 ${kernel_addr_r} Image; then
           setenv bootargs "${bootargs_hassos} ${bootargs_rpi} ${bootargs_b} rauc.slot=B"
       fi
     fi

buildroot-external/bootloader/barebox.config

@@ -19,7 +19,10 @@ CONFIG_PARTITION_DISK_EFI=y
 CONFIG_STATE=y
 CONFIG_STATE_DRV=y
 CONFIG_BOOTCHOOSER=y
+CONFIG_RESET_SOURCE=y
 CONFIG_CMD_BOOT=y
+CONFIG_CMD_RESET=y
+CONFIG_CMD_BOOTCHOOSER=y
 CONFIG_CMD_NV=y
 CONFIG_CMD_EXPORT=y
 CONFIG_CMD_GLOBAL=y
@@ -27,21 +30,25 @@ CONFIG_CMD_BASENAME=y
 CONFIG_CMD_DIRNAME=y
 CONFIG_CMD_READLINK=y
 CONFIG_CMD_GETOPT=y
+CONFIG_CMD_READF=y
+CONFIG_CMD_ECHO_E=y
+CONFIG_CMD_EDIT=y
 CONFIG_CMD_MENUTREE=y
 CONFIG_CMD_TIMEOUT=y
 CONFIG_CMD_OFTREE=y
 CONFIG_CMD_STATE=y
-CONFIG_CMD_BOOTCHOOSER=y
-CONFIG_CMD_READF=y
 
 CONFIG_OFTREE=y
 CONFIG_OFTREE_OVERLAY=y
 
 CONFIG_DISK=y
 CONFIG_DISK_WRITE=y
-
+CONFIG_FS_EXT4=y
 CONFIG_FS_FAT=y
 CONFIG_FS_FAT_WRITE=y
 CONFIG_FS_FAT_LFN=y
-CONFIG_FS_EXT4=y
+CONFIG_FS_SQUASHFS=y
+CONFIG_SQUASHFS_LZ4=y
+CONFIG_SQUASHFS_LZO=y
 CONFIG_LZ4_DECOMPRESS=y
+CONFIG_LZO_DECOMPRESS=y

buildroot-external/bootloader/barebox/boot/system0

@@ -3,6 +3,6 @@
 global linux.bootargs.dyn.root="root=PARTUUID=8d3d53e3-6d49-4c38-8349-aff6859e82fd rootfstype=squashfs ro"
 
 mkdir -p /mnt/system
-mount -t ext4 /dev/disk*.hassos-kernel0 /mnt/system
+mount /dev/disk*.hassos-kernel0 /mnt/system
 
 global bootm.image="/mnt/system/bzImage"

buildroot-external/bootloader/barebox/boot/system1

@@ -3,6 +3,6 @@
 global linux.bootargs.dyn.root="root=PARTUUID=a3ec664e-32ce-4665-95ea-7ae90ce9aa20 rootfstype=squashfs ro"
 
 mkdir -p /mnt/system
-mount -t ext4 /dev/disk*.hassos-kernel1 /mnt/system
+mount /dev/disk*.hassos-kernel1 /mnt/system
 
 global bootm.image="/mnt/system/bzImage"

buildroot-external/bootloader/uboot.config

@@ -9,9 +9,12 @@ CONFIG_SYS_PROMPT="HAOS> "
 CONFIG_EFI_PARTITION=y
 CONFIG_FS_EXT4=y
 CONFIG_FS_FAT=y
+CONFIG_FS_SQUASHFS=y
 # CONFIG_ENV_IS_IN_FAT is not set
 # CONFIG_ENV_IS_IN_EXT4 is not set
 CONFIG_ENV_IS_NOWHERE=Y
 # CONFIG_EFI_LOADER is not set
 CONFIG_CMD_SETEXPR=y
 CONFIG_CMD_FILEENV=y
+CONFIG_CMD_SQUASHFS=y
+CONFIG_LZO=y

buildroot-external/configs/generic_x86_64_defconfig

@@ -21,7 +21,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/pc/generic-x86-64 $(BR2_EXTERNAL_HASSOS_PATH)/board/pc/generic-x86-64/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.10.37"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.10.70"
 BR2_LINUX_KERNEL_DEFCONFIG="x86_64"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/pc/generic-x86-64/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
@@ -37,18 +37,25 @@ BR2_PACKAGE_E2FSPROGS_E2IMAGE=y
 BR2_PACKAGE_SQUASHFS=y
 BR2_PACKAGE_OS_AGENT=y
 BR2_PACKAGE_UDISKS2=y
+# BR2_PACKAGE_LVM2_STANDARD_INSTALL is not set
 BR2_PACKAGE_LINUX_FIRMWARE=y
 BR2_PACKAGE_LINUX_FIRMWARE_IBT=y
+BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_22260=y
 BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_3160=y
 BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_3168=y
+BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_5000=y
+BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_6000G2A=y
+BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_6000G2B=y
 BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_7260=y
 BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_7265=y
 BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_7265D=y
-BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_8000=y
+BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_8000C=y
 BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_8265=y
 BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_9XXX=y
 BR2_PACKAGE_LINUX_FIRMWARE_I915=y
+BR2_PACKAGE_LINUX_FIRMWARE_MEDIATEK_MT7601U=y
 BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT2XX=y
+BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT73=y
 BR2_PACKAGE_LINUX_FIRMWARE_RTL_8169=y
 BR2_PACKAGE_LINUX_FIRMWARE_RTL_87XX_BT=y
 BR2_PACKAGE_LINUX_FIRMWARE_RTL_88XX_BT=y
@@ -94,7 +101,7 @@ BR2_TARGET_ROOTFS_SQUASHFS4_LZ4=y
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_BAREBOX=y
 BR2_TARGET_BAREBOX_CUSTOM_VERSION=y
-BR2_TARGET_BAREBOX_CUSTOM_VERSION_VALUE="2020.04.0"
+BR2_TARGET_BAREBOX_CUSTOM_VERSION_VALUE="2021.05.0"
 BR2_TARGET_BAREBOX_USE_CUSTOM_CONFIG=y
 BR2_TARGET_BAREBOX_CUSTOM_CONFIG_FILE="$(BR2_EXTERNAL_HASSOS_PATH)/board/pc/barebox.config"
 BR2_TARGET_BAREBOX_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/bootloader/barebox.config"

buildroot-external/configs/odroid_c2_defconfig

@@ -21,7 +21,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-c2 $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-c2/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.10.37"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.10.70"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/kernel-amlogic.config"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config"
@@ -40,8 +40,11 @@ BR2_PACKAGE_E2FSPROGS_E2IMAGE=y
 BR2_PACKAGE_SQUASHFS=y
 BR2_PACKAGE_OS_AGENT=y
 BR2_PACKAGE_UDISKS2=y
+# BR2_PACKAGE_LVM2_STANDARD_INSTALL is not set
 BR2_PACKAGE_LINUX_FIRMWARE=y
+BR2_PACKAGE_LINUX_FIRMWARE_MEDIATEK_MT7601U=y
 BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT2XX=y
+BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT73=y
 BR2_PACKAGE_LINUX_FIRMWARE_RTL_87XX_BT=y
 BR2_PACKAGE_LINUX_FIRMWARE_RTL_88XX_BT=y
 BR2_PACKAGE_LINUX_FIRMWARE_RTL_81XX=y

buildroot-external/configs/odroid_c4_defconfig

@@ -21,7 +21,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-c4 $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-c4/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.10.37"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.10.70"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/kernel-amlogic.config"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config"
@@ -40,8 +40,11 @@ BR2_PACKAGE_E2FSPROGS_E2IMAGE=y
 BR2_PACKAGE_SQUASHFS=y
 BR2_PACKAGE_OS_AGENT=y
 BR2_PACKAGE_UDISKS2=y
+# BR2_PACKAGE_LVM2_STANDARD_INSTALL is not set
 BR2_PACKAGE_LINUX_FIRMWARE=y
+BR2_PACKAGE_LINUX_FIRMWARE_MEDIATEK_MT7601U=y
 BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT2XX=y
+BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT73=y
 BR2_PACKAGE_LINUX_FIRMWARE_RTL_87XX_BT=y
 BR2_PACKAGE_LINUX_FIRMWARE_RTL_88XX_BT=y
 BR2_PACKAGE_LINUX_FIRMWARE_RTL_81XX=y

buildroot-external/configs/odroid_n2_defconfig

@@ -21,7 +21,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-n2 $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-n2/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.10.37"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.10.70"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/kernel-amlogic.config"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-n2/kernel.config"
@@ -40,8 +40,11 @@ BR2_PACKAGE_E2FSPROGS_E2IMAGE=y
 BR2_PACKAGE_SQUASHFS=y
 BR2_PACKAGE_OS_AGENT=y
 BR2_PACKAGE_UDISKS2=y
+# BR2_PACKAGE_LVM2_STANDARD_INSTALL is not set
 BR2_PACKAGE_LINUX_FIRMWARE=y
+BR2_PACKAGE_LINUX_FIRMWARE_MEDIATEK_MT7601U=y
 BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT2XX=y
+BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT73=y
 BR2_PACKAGE_LINUX_FIRMWARE_RTL_87XX_BT=y
 BR2_PACKAGE_LINUX_FIRMWARE_RTL_88XX_BT=y
 BR2_PACKAGE_LINUX_FIRMWARE_RTL_81XX=y

buildroot-external/configs/odroid_xu4_defconfig

@@ -3,7 +3,7 @@ BR2_cortex_a7=y
 BR2_DL_DIR="/cache/dl"
 BR2_CCACHE=y
 BR2_CCACHE_DIR="/cache/cc"
-BR2_GLOBAL_PATCH_DIR="$(BR2_EXTERNAL_HASSOS_PATH)/patches $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/patches"
+BR2_GLOBAL_PATCH_DIR="$(BR2_EXTERNAL_HASSOS_PATH)/patches $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/patches $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-xu4/patches"
 BR2_TOOLCHAIN_BUILDROOT_GLIBC=y
 BR2_GCC_VERSION_9_X=y
 BR2_OPTIMIZE_2=y
@@ -22,7 +22,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-xu4 $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-xu4/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.10.37"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.10.70"
 BR2_LINUX_KERNEL_DEFCONFIG="exynos"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config"
 BR2_LINUX_KERNEL_LZ4=y
@@ -39,9 +39,12 @@ BR2_PACKAGE_E2FSPROGS_E2IMAGE=y
 BR2_PACKAGE_SQUASHFS=y
 BR2_PACKAGE_OS_AGENT=y
 BR2_PACKAGE_UDISKS2=y
+# BR2_PACKAGE_LVM2_STANDARD_INSTALL is not set
 BR2_PACKAGE_LINUX_FIRMWARE=y
 BR2_PACKAGE_LINUX_FIRMWARE_MFC_V8=y
+BR2_PACKAGE_LINUX_FIRMWARE_MEDIATEK_MT7601U=y
 BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT2XX=y
+BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT73=y
 BR2_PACKAGE_LINUX_FIRMWARE_RTL_87XX_BT=y
 BR2_PACKAGE_LINUX_FIRMWARE_RTL_88XX_BT=y
 BR2_PACKAGE_LINUX_FIRMWARE_RTL_81XX=y

buildroot-external/configs/ova_defconfig

@@ -22,7 +22,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/pc/ova $(BR2_EXTERNAL_HASSOS_PATH)/board/pc/ova/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.10.37"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.10.70"
 BR2_LINUX_KERNEL_DEFCONFIG="x86_64"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/pc/ova/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
@@ -38,18 +38,25 @@ BR2_PACKAGE_E2FSPROGS_E2IMAGE=y
 BR2_PACKAGE_SQUASHFS=y
 BR2_PACKAGE_OS_AGENT=y
 BR2_PACKAGE_UDISKS2=y
+# BR2_PACKAGE_LVM2_STANDARD_INSTALL is not set
 BR2_PACKAGE_LINUX_FIRMWARE=y
 BR2_PACKAGE_LINUX_FIRMWARE_IBT=y
+BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_22260=y
 BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_3160=y
 BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_3168=y
+BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_5000=y
+BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_6000G2A=y
+BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_6000G2B=y
 BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_7260=y
 BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_7265=y
 BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_7265D=y
-BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_8000=y
+BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_8000C=y
 BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_8265=y
 BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_9XXX=y
 BR2_PACKAGE_LINUX_FIRMWARE_I915=y
+BR2_PACKAGE_LINUX_FIRMWARE_MEDIATEK_MT7601U=y
 BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT2XX=y
+BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT73=y
 BR2_PACKAGE_LINUX_FIRMWARE_RTL_8169=y
 BR2_PACKAGE_LINUX_FIRMWARE_RTL_87XX_BT=y
 BR2_PACKAGE_LINUX_FIRMWARE_RTL_88XX_BT=y
@@ -96,7 +103,7 @@ BR2_TARGET_ROOTFS_SQUASHFS4_LZ4=y
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_BAREBOX=y
 BR2_TARGET_BAREBOX_CUSTOM_VERSION=y
-BR2_TARGET_BAREBOX_CUSTOM_VERSION_VALUE="2020.04.0"
+BR2_TARGET_BAREBOX_CUSTOM_VERSION_VALUE="2021.05.0"
 BR2_TARGET_BAREBOX_USE_CUSTOM_CONFIG=y
 BR2_TARGET_BAREBOX_CUSTOM_CONFIG_FILE="$(BR2_EXTERNAL_HASSOS_PATH)/board/pc/barebox.config"
 BR2_TARGET_BAREBOX_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/bootloader/barebox.config"

buildroot-external/configs/rpi0_w_defconfig

@@ -23,7 +23,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi0-w $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/raspberrypi/linux/archive/3a33f11c48572b9dd0fecac164b3990fc9234da8.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/raspberrypi/linux/archive/raspberrypi-kernel_1.20210527-1.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
@@ -40,7 +40,13 @@ BR2_PACKAGE_E2FSPROGS_E2IMAGE=y
 BR2_PACKAGE_SQUASHFS=y
 BR2_PACKAGE_OS_AGENT=y
 BR2_PACKAGE_UDISKS2=y
+# BR2_PACKAGE_LVM2_STANDARD_INSTALL is not set
 BR2_PACKAGE_LINUX_FIRMWARE=y
+BR2_PACKAGE_LINUX_FIRMWARE_MEDIATEK_MT7601U=y
+BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT2XX=y
+BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT73=y
+BR2_PACKAGE_LINUX_FIRMWARE_RTL_87XX_BT=y
+BR2_PACKAGE_LINUX_FIRMWARE_RTL_88XX_BT=y
 BR2_PACKAGE_LINUX_FIRMWARE_USB_SERIAL_TI=y
 BR2_PACKAGE_RPI_WIFI_FIRMWARE=y
 BR2_PACKAGE_RPI_FIRMWARE=y

buildroot-external/configs/rpi2_defconfig

@@ -23,7 +23,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi2 $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/raspberrypi/linux/archive/3a33f11c48572b9dd0fecac164b3990fc9234da8.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/raspberrypi/linux/archive/raspberrypi-kernel_1.20210527-1.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
@@ -40,8 +40,11 @@ BR2_PACKAGE_E2FSPROGS_E2IMAGE=y
 BR2_PACKAGE_SQUASHFS=y
 BR2_PACKAGE_OS_AGENT=y
 BR2_PACKAGE_UDISKS2=y
+# BR2_PACKAGE_LVM2_STANDARD_INSTALL is not set
 BR2_PACKAGE_LINUX_FIRMWARE=y
+BR2_PACKAGE_LINUX_FIRMWARE_MEDIATEK_MT7601U=y
 BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT2XX=y
+BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT73=y
 BR2_PACKAGE_LINUX_FIRMWARE_RTL_87XX_BT=y
 BR2_PACKAGE_LINUX_FIRMWARE_RTL_88XX_BT=y
 BR2_PACKAGE_LINUX_FIRMWARE_USB_SERIAL_TI=y

buildroot-external/configs/rpi3_64_defconfig

@@ -23,7 +23,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi3-64 $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/raspberrypi/linux/archive/3a33f11c48572b9dd0fecac164b3990fc9234da8.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/raspberrypi/linux/archive/raspberrypi-kernel_1.20210527-1.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi3"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
@@ -40,7 +40,13 @@ BR2_PACKAGE_E2FSPROGS_E2IMAGE=y
 BR2_PACKAGE_SQUASHFS=y
 BR2_PACKAGE_OS_AGENT=y
 BR2_PACKAGE_UDISKS2=y
+# BR2_PACKAGE_LVM2_STANDARD_INSTALL is not set
 BR2_PACKAGE_LINUX_FIRMWARE=y
+BR2_PACKAGE_LINUX_FIRMWARE_MEDIATEK_MT7601U=y
+BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT2XX=y
+BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT73=y
+BR2_PACKAGE_LINUX_FIRMWARE_RTL_87XX_BT=y
+BR2_PACKAGE_LINUX_FIRMWARE_RTL_88XX_BT=y
 BR2_PACKAGE_LINUX_FIRMWARE_USB_SERIAL_TI=y
 BR2_PACKAGE_RPI_FIRMWARE=y
 BR2_PACKAGE_RPI_WIFI_FIRMWARE=y

buildroot-external/configs/rpi3_defconfig

@@ -23,7 +23,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi3 $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/raspberrypi/linux/archive/3a33f11c48572b9dd0fecac164b3990fc9234da8.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/raspberrypi/linux/archive/raspberrypi-kernel_1.20210527-1.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
@@ -40,7 +40,13 @@ BR2_PACKAGE_E2FSPROGS_E2IMAGE=y
 BR2_PACKAGE_SQUASHFS=y
 BR2_PACKAGE_OS_AGENT=y
 BR2_PACKAGE_UDISKS2=y
+# BR2_PACKAGE_LVM2_STANDARD_INSTALL is not set
 BR2_PACKAGE_LINUX_FIRMWARE=y
+BR2_PACKAGE_LINUX_FIRMWARE_MEDIATEK_MT7601U=y
+BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT2XX=y
+BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT73=y
+BR2_PACKAGE_LINUX_FIRMWARE_RTL_87XX_BT=y
+BR2_PACKAGE_LINUX_FIRMWARE_RTL_88XX_BT=y
 BR2_PACKAGE_LINUX_FIRMWARE_USB_SERIAL_TI=y
 BR2_PACKAGE_RPI_FIRMWARE=y
 BR2_PACKAGE_RPI_WIFI_FIRMWARE=y

buildroot-external/configs/rpi4_64_defconfig

@@ -23,7 +23,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi4-64 $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/raspberrypi/linux/archive/3a33f11c48572b9dd0fecac164b3990fc9234da8.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/raspberrypi/linux/archive/raspberrypi-kernel_1.20210527-1.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="bcm2711"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
@@ -40,7 +40,13 @@ BR2_PACKAGE_E2FSPROGS_E2IMAGE=y
 BR2_PACKAGE_SQUASHFS=y
 BR2_PACKAGE_OS_AGENT=y
 BR2_PACKAGE_UDISKS2=y
+# BR2_PACKAGE_LVM2_STANDARD_INSTALL is not set
 BR2_PACKAGE_LINUX_FIRMWARE=y
+BR2_PACKAGE_LINUX_FIRMWARE_MEDIATEK_MT7601U=y
+BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT2XX=y
+BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT73=y
+BR2_PACKAGE_LINUX_FIRMWARE_RTL_87XX_BT=y
+BR2_PACKAGE_LINUX_FIRMWARE_RTL_88XX_BT=y
 BR2_PACKAGE_LINUX_FIRMWARE_USB_SERIAL_TI=y
 BR2_PACKAGE_RPI_FIRMWARE=y
 BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI4=y

buildroot-external/configs/rpi4_defconfig

@@ -23,7 +23,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi4 $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/raspberrypi/linux/archive/3a33f11c48572b9dd0fecac164b3990fc9234da8.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/raspberrypi/linux/archive/raspberrypi-kernel_1.20210527-1.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="bcm2711"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
@@ -40,7 +40,13 @@ BR2_PACKAGE_E2FSPROGS_E2IMAGE=y
 BR2_PACKAGE_SQUASHFS=y
 BR2_PACKAGE_OS_AGENT=y
 BR2_PACKAGE_UDISKS2=y
+# BR2_PACKAGE_LVM2_STANDARD_INSTALL is not set
 BR2_PACKAGE_LINUX_FIRMWARE=y
+BR2_PACKAGE_LINUX_FIRMWARE_MEDIATEK_MT7601U=y
+BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT2XX=y
+BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT73=y
+BR2_PACKAGE_LINUX_FIRMWARE_RTL_87XX_BT=y
+BR2_PACKAGE_LINUX_FIRMWARE_RTL_88XX_BT=y
 BR2_PACKAGE_LINUX_FIRMWARE_USB_SERIAL_TI=y
 BR2_PACKAGE_RPI_FIRMWARE=y
 BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI4=y

buildroot-external/configs/rpi_defconfig

@@ -23,7 +23,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/raspberrypi/linux/archive/3a33f11c48572b9dd0fecac164b3990fc9234da8.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/raspberrypi/linux/archive/raspberrypi-kernel_1.20210527-1.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
@@ -40,8 +40,11 @@ BR2_PACKAGE_E2FSPROGS_E2IMAGE=y
 BR2_PACKAGE_SQUASHFS=y
 BR2_PACKAGE_OS_AGENT=y
 BR2_PACKAGE_UDISKS2=y
+# BR2_PACKAGE_LVM2_STANDARD_INSTALL is not set
 BR2_PACKAGE_LINUX_FIRMWARE=y
+BR2_PACKAGE_LINUX_FIRMWARE_MEDIATEK_MT7601U=y
 BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT2XX=y
+BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT73=y
 BR2_PACKAGE_LINUX_FIRMWARE_RTL_87XX_BT=y
 BR2_PACKAGE_LINUX_FIRMWARE_RTL_88XX_BT=y
 BR2_PACKAGE_LINUX_FIRMWARE_USB_SERIAL_TI=y

buildroot-external/configs/tinker_defconfig

@@ -23,7 +23,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/asus/tinker $(BR2_EXTERNAL_HASSOS_PATH)/board/asus/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.10.37"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.10.70"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(BR2_EXTERNAL_HASSOS_PATH)/board/asus/tinker/kernel.config"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config"
@@ -42,7 +42,13 @@ BR2_PACKAGE_E2FSPROGS_E2IMAGE=y
 BR2_PACKAGE_SQUASHFS=y
 BR2_PACKAGE_OS_AGENT=y
 BR2_PACKAGE_UDISKS2=y
+# BR2_PACKAGE_LVM2_STANDARD_INSTALL is not set
 BR2_PACKAGE_LINUX_FIRMWARE=y
+BR2_PACKAGE_LINUX_FIRMWARE_MEDIATEK_MT7601U=y
+BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT2XX=y
+BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT73=y
+BR2_PACKAGE_LINUX_FIRMWARE_RTL_87XX_BT=y
+BR2_PACKAGE_LINUX_FIRMWARE_RTL_88XX_BT=y
 BR2_PACKAGE_LINUX_FIRMWARE_RTL_87XX=y
 BR2_PACKAGE_LINUX_FIRMWARE_USB_SERIAL_TI=y
 BR2_PACKAGE_CRDA=y

buildroot-external/kernel/device-support.config

@@ -8,6 +8,7 @@ CONFIG_USB_SERIAL_FTDI_SIO=m
 CONFIG_USB_SERIAL_PL2303=m
 CONFIG_USB_SERIAL_CH341=m
 CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_KEYSPAN=m
 
 CONFIG_USB_ACM=m
 CONFIG_USB_USBNET=m
@@ -20,13 +21,29 @@ CONFIG_BT_LE=y
 CONFIG_BT_INTEL=m
 CONFIG_BT_BCM=m
 CONFIG_BT_RTL=m
-CONFIG_BT_HCIBTUSB=y
-CONFIG_BT_HCIBTUSB_BCM=m
-CONFIG_BT_HCIBTUSB_RTL=m
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTUSB_BCM=y
+CONFIG_BT_HCIBTUSB_RTL=y
 
+# Wi-Fi Support
 CONFIG_RTL_CARDS=y
 CONFIG_RTL8192CU=m
 
+CONFIG_WLAN_VENDOR_MEDIATEK=y
+CONFIG_MT7601U=m
+
+CONFIG_WLAN_VENDOR_RALINK=y
+CONFIG_RT2X00=m
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2800USB_RT33XX=y
+CONFIG_RT2800USB_RT35XX=y
+CONFIG_RT2800USB_RT3573=y
+CONFIG_RT2800USB_RT53XX=y
+CONFIG_RT2800USB_RT55XX=y
+CONFIG_RT2800USB_UNKNOWN=y
+
 # Multimedia core support
 CONFIG_MEDIA_SUPPORT=y
 CONFIG_MEDIA_CONTROLLER=y

buildroot-external/kernel/hassos.config

@@ -37,6 +37,12 @@ CONFIG_VLAN_8021Q=m
 CONFIG_VLAN_8021Q_GVRP=y
 CONFIG_VLAN_8021Q_MVRP=y
 
+CONFIG_WIRELESS=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_CFG80211=m
+CONFIG_CFG80211_WEXT=y
+
 CONFIG_CIFS=m
 CONFIG_CIFS_XATTR=y
 CONFIG_CIFS_POSIX=y

buildroot-external/meta

@@ -1,7 +1,7 @@
 VERSION_MAJOR=6
-VERSION_BUILD=0
+VERSION_BUILD=5
 
 HASSOS_NAME="Home Assistant OS"
 HASSOS_ID="haos"
 
-DEPLOYMENT="development"
+DEPLOYMENT="production"

buildroot-external/package/bluetooth-bcm43xx/bluetooth-bcm43xx.mk

@@ -13,6 +13,7 @@ BLUETOOTH_BCM43XX_SITE_METHOD = local
 define BLUETOOTH_BCM43XX_BUILD_CMDS
 	curl -L -o $(@D)/BCM43430A1.hcd https://raw.githubusercontent.com/RPi-Distro/bluez-firmware/e7fd166981ab4bb9a36c2d1500205a078a35714d/broadcom/BCM43430A1.hcd
 	curl -L -o $(@D)/BCM4345C0.hcd https://raw.githubusercontent.com/RPi-Distro/bluez-firmware/e7fd166981ab4bb9a36c2d1500205a078a35714d/broadcom/BCM4345C0.hcd
+	curl -L -o $(@D)/BCM4345C5.hcd https://raw.githubusercontent.com/RPi-Distro/bluez-firmware/e7fd166981ab4bb9a36c2d1500205a078a35714d/broadcom/BCM4345C5.hcd
 	curl -L -o $(@D)/btuart https://raw.githubusercontent.com/RPi-Distro/pi-bluetooth/6f6386e91e33966d3c4a3cfee72d61e14c6a11ef/usr/bin/btuart
 	curl -L -o $(@D)/bthelper https://raw.githubusercontent.com/RPi-Distro/pi-bluetooth/6f6386e91e33966d3c4a3cfee72d61e14c6a11ef/usr/bin/bthelper
 	curl -L -o $(@D)/90-pi-bluetooth.rules https://raw.githubusercontent.com/RPi-Distro/pi-bluetooth/6f6386e91e33966d3c4a3cfee72d61e14c6a11ef/lib/udev/rules.d/90-pi-bluetooth.rules

buildroot-external/package/eq3_char_loop/eq3_char_loop.hash

@@ -0,0 +1,3 @@
+# Locally computed
+sha256  2cc35060f1667a71184fd191e72bd96793f0a9709f14262adb7279ace38ba960  eq3_char_loop-e60183fc5b8375d9eea185c716f716c07657fa00.tar.gz
+sha256  e600b8a501a17600d01bd7a4646508f94f3cd3b9df03661babd9f1801e579b36  LicenseDE.txt

buildroot-external/package/eq3_char_loop/eq3_char_loop.mk

@@ -8,7 +8,7 @@
 #
 #############################################################
 
-EQ3_CHAR_LOOP_VERSION = 8cb51174c2bc8c4b33df50a96b82c90e8092f79c
+EQ3_CHAR_LOOP_VERSION = e60183fc5b8375d9eea185c716f716c07657fa00
 EQ3_CHAR_LOOP_SITE = $(call github,eq-3,occu,$(EQ3_CHAR_LOOP_VERSION))
 EQ3_CHAR_LOOP_LICENSE = GPL2
 #EQ3_CHAR_LOOP_LICENSE_FILES = LICENSE

buildroot-external/package/generic_raw_uart/generic_raw_uart.hash

@@ -0,0 +1,3 @@
+# Locally computed
+sha256  45077e1b2ce89f8ea41c9039153a4e00f398fef80078e968f2861c43d475de45  generic_raw_uart-9510818fa12e52baf40fe5ac84e58fd62db4f70e.tar.gz
+sha256  b40930bbcf80744c86c46a12bc9da056641d722716c378f5659b9e555ef833e1  LICENSE

buildroot-external/package/generic_raw_uart/generic_raw_uart.mk

@@ -13,10 +13,10 @@
 #
 #############################################################
 
-GENERIC_RAW_UART_VERSION = dab76ddd1d568cc4925dc778e43d70fccffdc0e8
+GENERIC_RAW_UART_VERSION = 9510818fa12e52baf40fe5ac84e58fd62db4f70e
 GENERIC_RAW_UART_SITE = $(call github,alexreinert,piVCCU,$(GENERIC_RAW_UART_VERSION))
 GENERIC_RAW_UART_LICENSE = GPL2
-#GENERIC_RAW_UART_LICENSE_FILES = LICENSE
+GENERIC_RAW_UART_LICENSE_FILES = LICENSE
 GENERIC_RAW_UART_MODULE_SUBDIRS = kernel
 
 $(eval $(kernel-module))

buildroot-external/package/hassio/builder/hostapp.sh

@@ -26,20 +26,22 @@ while [[ $# -gt 0 ]]; do
     shift
 done
 
-SUPERVISOR="homeassistant/${ARCH}-hassio-supervisor"
-DNS="homeassistant/${ARCH}-hassio-dns"
-AUDIO="homeassistant/${ARCH}-hassio-audio"
-CLI="homeassistant/${ARCH}-hassio-cli"
-MULTICAST="homeassistant/${ARCH}-hassio-multicast"
-OBSERVER="homeassistant/${ARCH}-hassio-observer"
-LANDINGPAGE="homeassistant/${MACHINE}-homeassistant:landingpage"
+VERSION_JSON="$(curl -s ${VERSION_URL})"
 
-SUPERVISOR_VERSION=$(curl -s ${VERSION_URL} | jq -e -r '.supervisor')
-DNS_VERSION=$(curl -s ${VERSION_URL} | jq -e -r '.dns')
-CLI_VERSION=$(curl -s ${VERSION_URL} | jq -e -r '.cli')
-AUDIO_VERSION=$(curl -s ${VERSION_URL} | jq -e -r '.audio')
-MULTICAST_VERSION=$(curl -s ${VERSION_URL} | jq -e -r '.multicast')
-OBSERVER_VERSION=$(curl -s ${VERSION_URL} | jq -e -r '.observer')
+SUPERVISOR=$(echo "${VERSION_JSON}" | jq -e -r --arg arch "${ARCH}" '.images.supervisor | sub("{arch}"; $arch)')
+DNS=$(echo "${VERSION_JSON}" | jq -e -r --arg arch "${ARCH}" '.images.dns | sub("{arch}"; $arch)')
+AUDIO=$(echo "${VERSION_JSON}" | jq -e -r --arg arch "${ARCH}" '.images.audio | sub("{arch}"; $arch)')
+CLI=$(echo "${VERSION_JSON}" | jq -e -r --arg arch "${ARCH}" '.images.cli | sub("{arch}"; $arch)')
+MULTICAST=$(echo "${VERSION_JSON}" | jq -e -r --arg arch "${ARCH}" '.images.multicast | sub("{arch}"; $arch)')
+OBSERVER=$(echo "${VERSION_JSON}" | jq -e -r --arg arch "${ARCH}" '.images.observer | sub("{arch}"; $arch)')
+LANDINGPAGE=$(echo "${VERSION_JSON}" | jq -e -r --arg machine "${MACHINE}" '.images.core | sub("{machine}"; $machine)'):landingpage
+
+SUPERVISOR_VERSION=$(echo "${VERSION_JSON}" | jq -e -r '.supervisor')
+DNS_VERSION=$(echo "${VERSION_JSON}" | jq -e -r '.dns')
+CLI_VERSION=$(echo "${VERSION_JSON}" | jq -e -r '.cli')
+AUDIO_VERSION=$(echo "${VERSION_JSON}" | jq -e -r '.audio')
+MULTICAST_VERSION=$(echo "${VERSION_JSON}" | jq -e -r '.multicast')
+OBSERVER_VERSION=$(echo "${VERSION_JSON}" | jq -e -r '.observer')
 
 # Make image
 dd if=/dev/zero of=${DATA_IMG} bs=1G count=1
@@ -73,7 +75,9 @@ done
 
 # Install supervisor
 docker pull "${SUPERVISOR}:${SUPERVISOR_VERSION}"
-docker tag "${SUPERVISOR}:${SUPERVISOR_VERSION}" "${SUPERVISOR}:latest"
+
+# Need match with the tag used by OS
+docker tag "${SUPERVISOR}:${SUPERVISOR_VERSION}" "homeassistant/${ARCH}-hassio-supervisor:latest"
 
 # Install Plugins
 docker pull "${CLI}:${CLI_VERSION}"

buildroot-external/package/os-agent/os-agent.mk

@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-OS_AGENT_VERSION = 1.1.0
+OS_AGENT_VERSION = 1.2.1
 OS_AGENT_SITE = $(call github,home-assistant,os-agent,$(OS_AGENT_VERSION))
 OS_AGENT_LICENSE = Apache License 2.0
 OS_AGENT_LICENSE_FILES = LICENSE

buildroot-external/package/rpi-rf-mod/rpi-rf-mod.hash

@@ -0,0 +1,3 @@
+# Locally computed
+sha256  115e5c0e0174f21005e6e1d8a616dd86ad5ad61df5929b06e6f7b7b20a8c9e48  rpi-rf-mod-7f5d50c8ac72e114a6b11a4ae0e92e316260fb0d.tar.gz
+sha256  b40930bbcf80744c86c46a12bc9da056641d722716c378f5659b9e555ef833e1  LICENSE

buildroot-external/package/rpi-rf-mod/rpi-rf-mod.mk

@@ -11,15 +11,16 @@
 #
 #############################################################
 
-RPI_RF_MOD_VERSION = 3b0311063973669d0b5310a3d3e4b6280ac4f438
+RPI_RF_MOD_VERSION = 7f5d50c8ac72e114a6b11a4ae0e92e316260fb0d
 RPI_RF_MOD_SITE = $(call github,jens-maus,RaspberryMatic,$(RPI_RF_MOD_VERSION))
 RPI_RF_MOD_LICENSE = Apache-2.0
 RPI_RF_MOD_DEPENDENCIES = host-dtc
-#RPI_RF_MOD_LICENSE_FILES = LICENSE
+RPI_RF_MOD_LICENSE_FILES = LICENSE
 
 ifeq ($(BR2_PACKAGE_RPI_RF_MOD_DTS_RPI),y)
   # RaspberryPi DTS file
   RPI_RF_MOD_DTS_FILE = rpi-rf-mod
+  RPI_RF_MOD_DTS_FILE_ALT = rpi-rf-mod-rpi1
 else ifeq ($(BR2_PACKAGE_RPI_RF_MOD_DTS_TINKER),y)
   # ASUS Tinkerboard DTS file
   RPI_RF_MOD_DTS_FILE = rpi-rf-mod-tinker
@@ -38,12 +39,18 @@ define RPI_RF_MOD_BUILD_CMDS
   if [[ -n "$(RPI_RF_MOD_DTS_FILE)" ]]; then \
     $(HOST_DIR)/bin/dtc -@ -I dts -O dtb -W no-unit_address_vs_reg -o $(@D)/buildroot-external/package/rpi-rf-mod/dts/rpi-rf-mod.dtbo $(@D)/buildroot-external/package/rpi-rf-mod/dts/$(RPI_RF_MOD_DTS_FILE).dts; \
   fi
+  if [[ -n "$(RPI_RF_MOD_DTS_FILE_ALT)" ]]; then \
+    $(HOST_DIR)/bin/dtc -@ -I dts -O dtb -W no-unit_address_vs_reg -o $(@D)/buildroot-external/package/rpi-rf-mod/dts/$(RPI_RF_MOD_DTS_FILE_ALT).dtbo $(@D)/buildroot-external/package/rpi-rf-mod/dts/$(RPI_RF_MOD_DTS_FILE_ALT).dts; \
+  fi
 endef
 
 define RPI_RF_MOD_INSTALL_TARGET_CMDS
   if [[ -n "$(RPI_RF_MOD_DTS_FILE)" ]]; then \
     $(INSTALL) -D -m 0644 $(@D)/buildroot-external/package/rpi-rf-mod/dts/rpi-rf-mod.dtbo $(BINARIES_DIR)/; \
   fi
+  if [[ -n "$(RPI_RF_MOD_DTS_FILE_ALT)" ]]; then \
+    $(INSTALL) -D -m 0644 $(@D)/buildroot-external/package/rpi-rf-mod/dts/$(RPI_RF_MOD_DTS_FILE_ALT).dtbo $(BINARIES_DIR)/; \
+  fi
 endef
 
 $(eval $(generic-package))

buildroot-external/rootfs-overlay/etc/motd

@@ -0,0 +1,3 @@
+Welcome to Home Assistant OS.
+
+Use `ha` to access the Home Assistant CLI.

buildroot-external/rootfs-overlay/usr/bin/datactl

@@ -1,76 +0,0 @@
-#!/bin/sh
-# ==============================================================================
-# Home Assistant OS data partition handling
-# ==============================================================================
-set -e
-
-# Use current mount point. This avoids "Can't be the same disk!" error
-# when using a drive which has been used as a data drive previously.
-DATA_DEVICE_CHILD="$(findmnt --noheadings --output=source /mnt/data)"
-DATA_DEVICE_ROOT="/dev/$(lsblk -no pkname "${DATA_DEVICE_CHILD}")"
-
-if [ "${DATA_DEVICE_ROOT}" = "" ]; then
-    echo "[ERROR] Data disk device not found!"
-    exit 1
-fi
-
-# Move command
-if [ "${1}" = "move" ] && [ -e "${2}" ]; then
-    NEW_DEVICE_ROOT="${2}"
-
-    # Check device
-    if ! lsblk "${NEW_DEVICE_ROOT}" | grep disk > /dev/null 2>&1; then
-        echo "[ERROR] Is not disk!"
-        exit 1
-    elif [ "${NEW_DEVICE_ROOT}" = "${DATA_DEVICE_ROOT}" ]; then
-        echo "[ERROR] Can't be the same disk!"
-        exit 1
-    fi
-
-    # Flag device
-    if [ -z "${DATACTL_NOCONFIRM}" ]; then
-        echo "WARNING: All partitions on ${NEW_DEVICE_ROOT} will be deleted!"
-        printf "Enter \"yes\" to confirm: "
-        read -r confirm
-        if [ "${confirm}" != "yes" ]; then
-            echo "Aborting."
-            exit 1
-        fi
-    fi
-
-    # Create GPT partition table with a single data partition
-    cat << EOF | sfdisk --wipe-partitions=always --wipe=always "${NEW_DEVICE_ROOT}"
-label: gpt
-uuid=a52a4597-fa3a-4851-aefd-2fbe9f849079, type=0FC63DAF-8483-4772-8E79-3D69D8477DE4, name=hassos-data-external
-EOF
-
-    # Since we create a new partition table etc. we are guaranteed the target
-    # partition is partition 1
-    NEW_DEVICE_PART_SIZE=$(cat "/sys/class/block/$(basename "${NEW_DEVICE_ROOT}")1/size")
-    OLD_DEVICE_PART_SIZE=$(cat "/sys/class/block/$(basename "${DATA_DEVICE_CHILD}")/size")
-
-    if [ "${NEW_DEVICE_PART_SIZE}" -lt "${OLD_DEVICE_PART_SIZE}" ]; then
-        echo "[INFO] Target device too small!"
-        echo "label: gpt" | sfdisk "${NEW_DEVICE_ROOT}"
-        exit 1
-    fi
-
-    touch "/mnt/overlay/move-data"
-    cat << EOF
-
-Disk ${NEW_DEVICE_ROOT} has been prepared to be used as data drive and the data
-move has been scheduled for the next reboot. Please reboot the device now and
-make sure to leave the disk connected to the system from now on.
-EOF
-
-else
-    cat << EOF
-Usage: datactl move <device>
-
-Moves data partition to external device provided by <device> (without partition
-number). A new partition table and a partition for the complete device will be
-created by datactl.
-EOF
-
-fi
-

buildroot-external/rootfs-overlay/usr/bin/ha

@@ -3,5 +3,4 @@
 # HA utility
 # ==============================================================================
 
-# shellcheck disable=SC2048,SC2086
-docker exec hassio_cli ha $*
+docker exec hassio_cli ha "$@"

buildroot-external/rootfs-overlay/usr/lib/systemd/system/ha-cli@.service

@@ -22,7 +22,6 @@ Before=rescue.service
 # option to preserve environment (-p), followed by '--' for safety, and then
 # the entered username.
 ExecStart=/usr/sbin/hassos-cli
-RemainAfterExit=yes
 Type=idle
 Restart=always
 RestartSec=0

buildroot-external/scripts/hdd-image.sh

@@ -331,5 +331,5 @@ function convert_disk_image_zip() {
     local hdd_img="$(hassos_image_name "${hdd_ext}")"
 
     rm -f "${hdd_img}.zip"
-    zip -r "${hdd_img}.zip" "${hdd_img}"
+    zip -j -m -q -r "${hdd_img}.zip" "${hdd_img}"
 }

buildroot-external/scripts/rauc.sh

@@ -43,7 +43,7 @@ function _write_rauc_system() {
     (
         echo "[slot.kernel.${slot_num}]"
         echo "device=/dev/disk/by-partlabel/hassos-kernel${slot_num}"
-        echo "type=ext4"
+        echo "type=raw"
         echo "bootname=${slot_name}"
 
         echo "[slot.rootfs.${slot_num}]"

buildroot-patches/0001-docker-add-AppArmor-support.patch

@@ -1,8 +1,8 @@
-From 9c98c07abbe9ee675ec588ad7c15f0285e8a0f07 Mon Sep 17 00:00:00 2001
-Message-Id: <9c98c07abbe9ee675ec588ad7c15f0285e8a0f07.1618500237.git.stefan@agner.ch>
+From 09f9b55b419ef01ad24998bbacb1a49976b58bfa Mon Sep 17 00:00:00 2001
+Message-Id: <09f9b55b419ef01ad24998bbacb1a49976b58bfa.1627492452.git.stefan@agner.ch>
 From: Pascal Vizeli <pvizeli@syshack.ch>
 Date: Mon, 13 Jan 2020 12:27:06 +0000
-Subject: [PATCH 1/9] docker: add AppArmor support
+Subject: [PATCH 01/11] docker: add AppArmor support
 
 Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch>
 Signed-off-by: Stefan Agner <stefan@agner.ch>
@@ -27,5 +27,5 @@ index e229d9cb54..e968518a69 100644
  DOCKER_CONTAINERD_DEPENDENCIES += libseccomp host-pkgconf
  DOCKER_CONTAINERD_TAGS += seccomp
 -- 
-2.31.1
+2.32.0
 

buildroot-patches/0002-network-manager-wpa_supplicant.patch

@@ -1,10 +1,10 @@
-From dc4191d1393e2d25e1270d6b7c60d780b52f6179 Mon Sep 17 00:00:00 2001
-Message-Id: <dc4191d1393e2d25e1270d6b7c60d780b52f6179.1618500237.git.stefan@agner.ch>
-In-Reply-To: <9c98c07abbe9ee675ec588ad7c15f0285e8a0f07.1618500237.git.stefan@agner.ch>
-References: <9c98c07abbe9ee675ec588ad7c15f0285e8a0f07.1618500237.git.stefan@agner.ch>
+From e06ba47c59eec31475a8302fca569a0315158154 Mon Sep 17 00:00:00 2001
+Message-Id: <e06ba47c59eec31475a8302fca569a0315158154.1627492452.git.stefan@agner.ch>
+In-Reply-To: <09f9b55b419ef01ad24998bbacb1a49976b58bfa.1627492452.git.stefan@agner.ch>
+References: <09f9b55b419ef01ad24998bbacb1a49976b58bfa.1627492452.git.stefan@agner.ch>
 From: Pascal Vizeli <pvizeli@syshack.ch>
 Date: Thu, 16 Apr 2020 14:32:45 +0000
-Subject: [PATCH 2/9] network-manager: wpa_supplicant
+Subject: [PATCH 02/11] network-manager: wpa_supplicant
 
 Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch>
 ---
@@ -29,7 +29,7 @@ index 7d44768460..218dc860ff 100644
  	select BR2_PACKAGE_LIBNDP
  	help
 diff --git a/package/network-manager/network-manager.mk b/package/network-manager/network-manager.mk
-index 9402564cb4..79ae42e987 100644
+index 607c2b402b..c8351d8730 100644
 --- a/package/network-manager/network-manager.mk
 +++ b/package/network-manager/network-manager.mk
 @@ -10,7 +10,7 @@ NETWORK_MANAGER_SOURCE = NetworkManager-$(NETWORK_MANAGER_VERSION).tar.xz
@@ -42,5 +42,5 @@ index 9402564cb4..79ae42e987 100644
  NETWORK_MANAGER_LICENSE_FILES = COPYING COPYING.LGPL CONTRIBUTING
  NETWORK_MANAGER_CPE_ID_VENDOR = gnome
 -- 
-2.31.1
+2.32.0
 

buildroot-patches/0003-Fix-dhcp-client.patch

@@ -1,10 +1,10 @@
-From 3ca46afd47a195d35bca247c75f02f3c95f1c1ef Mon Sep 17 00:00:00 2001
-Message-Id: <3ca46afd47a195d35bca247c75f02f3c95f1c1ef.1618500237.git.stefan@agner.ch>
-In-Reply-To: <9c98c07abbe9ee675ec588ad7c15f0285e8a0f07.1618500237.git.stefan@agner.ch>
-References: <9c98c07abbe9ee675ec588ad7c15f0285e8a0f07.1618500237.git.stefan@agner.ch>
+From 654f5326428f1f442369589ce74333a44293fac2 Mon Sep 17 00:00:00 2001
+Message-Id: <654f5326428f1f442369589ce74333a44293fac2.1627492452.git.stefan@agner.ch>
+In-Reply-To: <09f9b55b419ef01ad24998bbacb1a49976b58bfa.1627492452.git.stefan@agner.ch>
+References: <09f9b55b419ef01ad24998bbacb1a49976b58bfa.1627492452.git.stefan@agner.ch>
 From: Pascal Vizeli <pvizeli@syshack.ch>
 Date: Thu, 16 Apr 2020 12:01:44 +0000
-Subject: [PATCH 3/9] Fix dhcp client
+Subject: [PATCH 03/11] Fix dhcp client
 
 Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch>
 ---
@@ -12,10 +12,10 @@ Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch>
  1 file changed, 1 insertion(+), 2 deletions(-)
 
 diff --git a/package/dhcp/dhcp.mk b/package/dhcp/dhcp.mk
-index 988c7792dc..d8f331719a 100644
+index 1edb3c5e99..b945c46b18 100644
 --- a/package/dhcp/dhcp.mk
 +++ b/package/dhcp/dhcp.mk
-@@ -77,8 +77,7 @@ endif
+@@ -79,8 +79,7 @@ endif
  
  ifeq ($(BR2_PACKAGE_DHCP_CLIENT),y)
  define DHCP_INSTALL_CLIENT
@@ -26,5 +26,5 @@ index 988c7792dc..d8f331719a 100644
  		install-sbinPROGRAMS
  	$(INSTALL) -m 0644 -D package/dhcp/dhclient.conf \
 -- 
-2.31.1
+2.32.0
 

buildroot-patches/0004-package-rpi-firmware-Allow-to-deploy-multiple-firmwa.patch

@@ -1,10 +1,10 @@
-From d6d381417d7e1aa442b27a699e790572b2b233d2 Mon Sep 17 00:00:00 2001
-Message-Id: <d6d381417d7e1aa442b27a699e790572b2b233d2.1618500237.git.stefan@agner.ch>
-In-Reply-To: <9c98c07abbe9ee675ec588ad7c15f0285e8a0f07.1618500237.git.stefan@agner.ch>
-References: <9c98c07abbe9ee675ec588ad7c15f0285e8a0f07.1618500237.git.stefan@agner.ch>
+From 81093c8655737f9208df3b75371290600625bec8 Mon Sep 17 00:00:00 2001
+Message-Id: <81093c8655737f9208df3b75371290600625bec8.1627492452.git.stefan@agner.ch>
+In-Reply-To: <09f9b55b419ef01ad24998bbacb1a49976b58bfa.1627492452.git.stefan@agner.ch>
+References: <09f9b55b419ef01ad24998bbacb1a49976b58bfa.1627492452.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Mon, 8 Feb 2021 14:08:28 +0100
-Subject: [PATCH 4/9] package/rpi-firmware: Allow to deploy multiple firmware
+Subject: [PATCH 04/11] package/rpi-firmware: Allow to deploy multiple firmware
  files
 
 Add a new config option to allow a specific list of firmware files to be
@@ -72,5 +72,5 @@ index f3d28ef825..58085a8ca8 100644
  	$(RPI_FIRMWARE_INSTALL_DTB)
  	$(RPI_FIRMWARE_INSTALL_DTB_OVERLAYS)
 -- 
-2.31.1
+2.32.0
 

buildroot-patches/0005-package-linux-firmware-add-RTL87XX-RTL88XX-Bluetooth.patch

@@ -1,10 +1,10 @@
-From de154cd65e16420abc726bd25b5a35c70b81623f Mon Sep 17 00:00:00 2001
-Message-Id: <de154cd65e16420abc726bd25b5a35c70b81623f.1618500237.git.stefan@agner.ch>
-In-Reply-To: <9c98c07abbe9ee675ec588ad7c15f0285e8a0f07.1618500237.git.stefan@agner.ch>
-References: <9c98c07abbe9ee675ec588ad7c15f0285e8a0f07.1618500237.git.stefan@agner.ch>
+From f93e6246fbc58814dd4547eade63102c7626b76b Mon Sep 17 00:00:00 2001
+Message-Id: <f93e6246fbc58814dd4547eade63102c7626b76b.1627492452.git.stefan@agner.ch>
+In-Reply-To: <09f9b55b419ef01ad24998bbacb1a49976b58bfa.1627492452.git.stefan@agner.ch>
+References: <09f9b55b419ef01ad24998bbacb1a49976b58bfa.1627492452.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Wed, 17 Mar 2021 14:48:43 +0100
-Subject: [PATCH 5/9] package/linux-firmware: add RTL87XX/RTL88XX Bluetooth
+Subject: [PATCH 05/11] package/linux-firmware: add RTL87XX/RTL88XX Bluetooth
  firmware
 
 Add firmware files for Realtek 87XX and 88XX Bluetooth chipsets. Those
@@ -70,5 +70,5 @@ index f23da171c6..9c512ab750 100644
  ifeq ($(BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT61),y)
  LINUX_FIRMWARE_FILES += rt2561.bin rt2561s.bin rt2661.bin
 -- 
-2.31.1
+2.32.0
 

buildroot-patches/0006-package-docker-proxy-bump-version-to-b3507428be5b.patch

@@ -1,10 +1,10 @@
-From f69e0329ecb778a680a7337024f49eda79bab5b8 Mon Sep 17 00:00:00 2001
-Message-Id: <f69e0329ecb778a680a7337024f49eda79bab5b8.1618500237.git.stefan@agner.ch>
-In-Reply-To: <9c98c07abbe9ee675ec588ad7c15f0285e8a0f07.1618500237.git.stefan@agner.ch>
-References: <9c98c07abbe9ee675ec588ad7c15f0285e8a0f07.1618500237.git.stefan@agner.ch>
+From 28a2450108743762b3b43629c86248f5fe45aa70 Mon Sep 17 00:00:00 2001
+Message-Id: <28a2450108743762b3b43629c86248f5fe45aa70.1627492452.git.stefan@agner.ch>
+In-Reply-To: <09f9b55b419ef01ad24998bbacb1a49976b58bfa.1627492452.git.stefan@agner.ch>
+References: <09f9b55b419ef01ad24998bbacb1a49976b58bfa.1627492452.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Thu, 15 Apr 2021 17:22:59 +0200
-Subject: [PATCH 9/9] package/docker-proxy: bump version to b3507428be5b
+Subject: [PATCH 06/11] package/docker-proxy: bump version to b3507428be5b
 
 Which is the version used by docker 20.10.6:
 https://github.com/moby/moby/commit/88470052e7d42f3dc774442241fd6bab817876f6
@@ -40,5 +40,5 @@ index 6600b24ed9..7270834119 100644
  DOCKER_PROXY_LICENSE = Apache-2.0
  DOCKER_PROXY_LICENSE_FILES = LICENSE
 -- 
-2.31.1
+2.32.0
 

buildroot-patches/0007-package-rpi-firmware-bump-version-to-1.20210303.patch

@@ -1,10 +1,10 @@
-From 5cffe6f96bcab32bbe5019bc4426c1cbdd7f2593 Mon Sep 17 00:00:00 2001
-Message-Id: <5cffe6f96bcab32bbe5019bc4426c1cbdd7f2593.1618824199.git.stefan@agner.ch>
-In-Reply-To: <9c98c07abbe9ee675ec588ad7c15f0285e8a0f07.1618824199.git.stefan@agner.ch>
-References: <9c98c07abbe9ee675ec588ad7c15f0285e8a0f07.1618824199.git.stefan@agner.ch>
+From 30030f11ea80bee5f25136a3caf070a9b97e8b10 Mon Sep 17 00:00:00 2001
+Message-Id: <30030f11ea80bee5f25136a3caf070a9b97e8b10.1627492452.git.stefan@agner.ch>
+In-Reply-To: <09f9b55b419ef01ad24998bbacb1a49976b58bfa.1627492452.git.stefan@agner.ch>
+References: <09f9b55b419ef01ad24998bbacb1a49976b58bfa.1627492452.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Mon, 19 Apr 2021 10:59:03 +0200
-Subject: [PATCH 11/11] package/rpi-firmware: bump version to 1.20210303
+Subject: [PATCH 07/11] package/rpi-firmware: bump version to 1.20210303
 
 Keep rpi-firmware up-to-date with the kernel version bump (tag
 1.20210303).
@@ -38,5 +38,5 @@ index 58085a8ca8..ea82836900 100644
  RPI_FIRMWARE_LICENSE = BSD-3-Clause
  RPI_FIRMWARE_LICENSE_FILES = boot/LICENCE.broadcom
 -- 
-2.31.1
+2.32.0
 

buildroot-patches/0007-package-runc-bump-to-version-1.0.0-rc93.patch

@@ -1,39 +0,0 @@
-From b169d34718e596e885c34b4fda9af4f85fbc5f1f Mon Sep 17 00:00:00 2001
-Message-Id: <b169d34718e596e885c34b4fda9af4f85fbc5f1f.1618500237.git.stefan@agner.ch>
-In-Reply-To: <9c98c07abbe9ee675ec588ad7c15f0285e8a0f07.1618500237.git.stefan@agner.ch>
-References: <9c98c07abbe9ee675ec588ad7c15f0285e8a0f07.1618500237.git.stefan@agner.ch>
-From: Stefan Agner <stefan@agner.ch>
-Date: Thu, 15 Apr 2021 17:22:23 +0200
-Subject: [PATCH 7/9] package/runc: bump to version 1.0.0-rc93
-
-Signed-off-by: Stefan Agner <stefan@agner.ch>
----
- package/runc/runc.hash | 2 +-
- package/runc/runc.mk   | 2 +-
- 2 files changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/package/runc/runc.hash b/package/runc/runc.hash
-index d792947d5f..0f9cfbbe9a 100644
---- a/package/runc/runc.hash
-+++ b/package/runc/runc.hash
-@@ -1,3 +1,3 @@
- # Locally computed
--sha256	28378df983a3c586ed3ec8c76a774a9b10f36a0c323590a284b801cce95cc61f  runc-1.0.0-rc92.tar.gz
-+sha256	e42456078d2f76c925cdd656e4f423b918525d8188521de05e893b6bb473a6f8  runc-1.0.0-rc93.tar.gz
- sha256  552a739c3b25792263f731542238b92f6f8d07e9a488eae27e6c4690038a8243  LICENSE
-diff --git a/package/runc/runc.mk b/package/runc/runc.mk
-index 14689bbde1..c5cb57bdc8 100644
---- a/package/runc/runc.mk
-+++ b/package/runc/runc.mk
-@@ -5,7 +5,7 @@
- ################################################################################
- 
- RUNC_VERSION_MAJOR = 1.0.0
--RUNC_VERSION_MINOR = rc92
-+RUNC_VERSION_MINOR = rc93
- RUNC_VERSION = $(RUNC_VERSION_MAJOR)-$(RUNC_VERSION_MINOR)
- RUNC_SITE = $(call github,opencontainers,runc,v$(RUNC_VERSION))
- RUNC_LICENSE = Apache-2.0
--- 
-2.31.1
-

buildroot-patches/0008-package-linux-firmware-add-rtl8761b-rtl8761bu-firmwa.patch

@@ -0,0 +1,55 @@
+From af2981f04e79fc5d4298e027d7a02ecfd3316bd7 Mon Sep 17 00:00:00 2001
+Message-Id: <af2981f04e79fc5d4298e027d7a02ecfd3316bd7.1627492452.git.stefan@agner.ch>
+In-Reply-To: <09f9b55b419ef01ad24998bbacb1a49976b58bfa.1627492452.git.stefan@agner.ch>
+References: <09f9b55b419ef01ad24998bbacb1a49976b58bfa.1627492452.git.stefan@agner.ch>
+From: Stefan Agner <stefan@agner.ch>
+Date: Sat, 19 Jun 2021 18:20:46 +0200
+Subject: [PATCH 08/11] package/linux-firmware: add rtl8761b/rtl8761bu firmware
+
+Bumpt to latest git hash and deploy rtl8761b/rtl8761bu firmwares as
+well.
+
+Signed-off-by: Stefan Agner <stefan@agner.ch>
+---
+ package/linux-firmware/linux-firmware.hash | 2 +-
+ package/linux-firmware/linux-firmware.mk   | 6 ++++--
+ 2 files changed, 5 insertions(+), 3 deletions(-)
+
+diff --git a/package/linux-firmware/linux-firmware.hash b/package/linux-firmware/linux-firmware.hash
+index 12af68f2d3..df66b87c50 100644
+--- a/package/linux-firmware/linux-firmware.hash
++++ b/package/linux-firmware/linux-firmware.hash
+@@ -1,5 +1,5 @@
+ # Locally calculated
+-sha256  f97d6d884026c5e3641909946713dcfea580c307d47830d37d42bfcc9a93870a  linux-firmware-20201022-br1.tar.gz
++sha256  cfbacbadf8b7ad2fd8ce1198f3d923329777922e45ff3f9497a98c7f2e15c485  linux-firmware-64f02a260ef8bd9e0d1dad369ef376338045d15b-br1.tar.gz
+ sha256  8116433f4004fc0c24d72b3d9e497808b724aa0e5e1cd63fc1bf66b715b1e2e9  LICENCE.Abilis
+ sha256  8d5847d2971241d4d6a51c16e206379de53a6d4e203fa6f8e1c1e9279c7c4ad0  LICENSE.amdgpu
+ sha256  2d6062d63b91eb750bf741498691604f75184b9fee97608ec537cd09bd6a42b4  LICENCE.Marvell
+diff --git a/package/linux-firmware/linux-firmware.mk b/package/linux-firmware/linux-firmware.mk
+index 9c512ab750..96da50751b 100644
+--- a/package/linux-firmware/linux-firmware.mk
++++ b/package/linux-firmware/linux-firmware.mk
+@@ -4,7 +4,7 @@
+ #
+ ################################################################################
+ 
+-LINUX_FIRMWARE_VERSION = 20201022
++LINUX_FIRMWARE_VERSION = 64f02a260ef8bd9e0d1dad369ef376338045d15b
+ LINUX_FIRMWARE_SITE = http://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git
+ LINUX_FIRMWARE_SITE_METHOD = git
+ 
+@@ -70,7 +70,9 @@ LINUX_FIRMWARE_FILES += \
+ 	rtl_bt/rtl8723a_fw.bin rtl_bt/rtl8723b_fw.bin \
+ 	rtl_bt/rtl8723bs_config-OBDA8723.bin \
+ 	rtl_bt/rtl8723bs_fw.bin rtl_bt/rtl8723d_config.bin \
+-	rtl_bt/rtl8723d_fw.bin rtl_bt/rtl8761a_fw.bin
++	rtl_bt/rtl8723d_fw.bin rtl_bt/rtl8761a_fw.bin \
++	rtl_bt/rtl8761b_fw.bin rtl_bt/rtl8761b_config.bin \
++	rtl_bt/rtl8761bu_fw.bin rtl_bt/rtl8761bu_config.bin
+ LINUX_FIRMWARE_ALL_LICENSE_FILES += LICENCE.rtlwifi_firmware.txt
+ endif
+ 
+-- 
+2.32.0
+

buildroot-patches/0009-package-lvm2-fix-installation-of-systemd-units.patch

@@ -0,0 +1,62 @@
+From f358c8ba53970154054bc2140fb4127a116d97ff Mon Sep 17 00:00:00 2001
+Message-Id: <f358c8ba53970154054bc2140fb4127a116d97ff.1627492452.git.stefan@agner.ch>
+In-Reply-To: <09f9b55b419ef01ad24998bbacb1a49976b58bfa.1627492452.git.stefan@agner.ch>
+References: <09f9b55b419ef01ad24998bbacb1a49976b58bfa.1627492452.git.stefan@agner.ch>
+From: "Yann E. MORIN" <yann.morin.1998@free.fr>
+Date: Fri, 21 May 2021 16:44:36 +0200
+Subject: [PATCH 09/11] package/lvm2: fix installation of systemd units
+
+Since we bump the version in commit 80997acd3587 (package/lvm2: bump
+version to 2.03.12), the installation of systemd units is no longer
+functional without a full installation.
+
+As Pascal puts it: the systemd service files don't make a whole lot of
+sense when there isn't a full lvm2 install.
+
+Move the conditional block that install system units, so that it only
+occurs when we do a full installation.
+
+Fixes;
+    http://autobuild.buildroot.org/results/f47/f470ffb55625e2639cecde713442550eb532d0d7/
+    http://autobuild.buildroot.org/results/954/9547929292e81671fbe3a5b4bbc87a6424edb1ca/
+    http://autobuild.buildroot.org/results/303/30359c351a6ce2f9139494a531e036f0b0406ccf
+
+Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
+Co-Developped-by: Pascal de Bruijn <p.debruijn@unilogic.nl>
+Cc: Pascal de Bruijn <p.debruijn@unilogic.nl>
+Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
+Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
+(cherry picked from commit 8a313b019c7d7e898186a8b08f9c25ae0194fa16)
+Signed-off-by: Stefan Agner <stefan@agner.ch>
+---
+ package/lvm2/lvm2.mk | 7 +++----
+ 1 file changed, 3 insertions(+), 4 deletions(-)
+
+diff --git a/package/lvm2/lvm2.mk b/package/lvm2/lvm2.mk
+index 19e8757e54..87c1c761ea 100644
+--- a/package/lvm2/lvm2.mk
++++ b/package/lvm2/lvm2.mk
+@@ -53,6 +53,9 @@ LVM2_INSTALL_TARGET_OPTS += install_device-mapper
+ else
+ LVM2_INSTALL_STAGING_OPTS += install
+ LVM2_INSTALL_TARGET_OPTS += install
++ifeq ($(BR2_INIT_SYSTEMD),y)
++LVM2_INSTALL_TARGET_OPTS += install_systemd_units install_systemd_generators
++endif
+ endif
+ 
+ ifeq ($(BR2_PACKAGE_LVM2_APP_LIBRARY),y)
+@@ -67,10 +70,6 @@ else
+ LVM2_CONF_OPTS += --disable-lvmetad
+ endif
+ 
+-ifeq ($(BR2_INIT_SYSTEMD),y)
+-LVM2_INSTALL_TARGET_OPTS += install_systemd_units install_systemd_generators
+-endif
+-
+ ifeq ($(BR2_TOOLCHAIN_SUPPORTS_PIE),)
+ LVM2_CONF_ENV += ac_cv_flag_HAVE_PIE=no
+ endif
+-- 
+2.32.0
+

buildroot-patches/0010-package-rpi-wifi-firmware-bump-version-to-883b726.patch

@@ -0,0 +1,39 @@
+From c8de13c1131adab0455eca939c4f168fd0ae30af Mon Sep 17 00:00:00 2001
+Message-Id: <c8de13c1131adab0455eca939c4f168fd0ae30af.1627492452.git.stefan@agner.ch>
+In-Reply-To: <09f9b55b419ef01ad24998bbacb1a49976b58bfa.1627492452.git.stefan@agner.ch>
+References: <09f9b55b419ef01ad24998bbacb1a49976b58bfa.1627492452.git.stefan@agner.ch>
+From: Stefan Agner <stefan@agner.ch>
+Date: Wed, 28 Jul 2021 15:52:18 +0200
+Subject: [PATCH 10/11] package/rpi-wifi-firmware: bump version to 883b726
+
+Signed-off-by: Stefan Agner <stefan@agner.ch>
+---
+ package/rpi-wifi-firmware/rpi-wifi-firmware.hash | 2 +-
+ package/rpi-wifi-firmware/rpi-wifi-firmware.mk   | 2 +-
+ 2 files changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/package/rpi-wifi-firmware/rpi-wifi-firmware.hash b/package/rpi-wifi-firmware/rpi-wifi-firmware.hash
+index 71e323e806..3bd62306eb 100644
+--- a/package/rpi-wifi-firmware/rpi-wifi-firmware.hash
++++ b/package/rpi-wifi-firmware/rpi-wifi-firmware.hash
+@@ -1,3 +1,3 @@
+ # Locally calculated
+-sha256  cf806f6bdba0f803b90bc210f524a6ac37bac7ad19306c61474bb2dc59875e87  rpi-wifi-firmware-9c0ffe9a7f0753b36ed88f7981905a989d940ea9.tar.gz
++sha256  0e7fcfe75a8990815a184dc55f8fdf5d0644d351a15a7aef865ff90ff4ca8eb4  rpi-wifi-firmware-883b72628de1d7efa45b421da0cbf175ac2374f8.tar.gz
+ sha256  b16056fc91b82a0e3e8de8f86c2dac98201aa9dc3cbd33e8d38f1b087fcec30d  LICENCE.broadcom_bcm43xx
+diff --git a/package/rpi-wifi-firmware/rpi-wifi-firmware.mk b/package/rpi-wifi-firmware/rpi-wifi-firmware.mk
+index 24ba5941b0..28926ff4f0 100644
+--- a/package/rpi-wifi-firmware/rpi-wifi-firmware.mk
++++ b/package/rpi-wifi-firmware/rpi-wifi-firmware.mk
+@@ -4,7 +4,7 @@
+ #
+ ################################################################################
+ 
+-RPI_WIFI_FIRMWARE_VERSION = 9c0ffe9a7f0753b36ed88f7981905a989d940ea9
++RPI_WIFI_FIRMWARE_VERSION = 883b72628de1d7efa45b421da0cbf175ac2374f8
+ RPI_WIFI_FIRMWARE_SITE = $(call github,LibreELEC,brcmfmac_sdio-firmware-rpi,$(RPI_WIFI_FIRMWARE_VERSION))
+ RPI_WIFI_FIRMWARE_LICENSE = PROPRIETARY
+ RPI_WIFI_FIRMWARE_LICENSE_FILES = LICENCE.broadcom_bcm43xx
+-- 
+2.32.0
+

buildroot-patches/0011-package-rpi-firmware-bump-version-to-1.20210527.patch

@@ -0,0 +1,42 @@
+From c92d04a4315c71fcb83caa86130f38fc22b50722 Mon Sep 17 00:00:00 2001
+Message-Id: <c92d04a4315c71fcb83caa86130f38fc22b50722.1627492452.git.stefan@agner.ch>
+In-Reply-To: <09f9b55b419ef01ad24998bbacb1a49976b58bfa.1627492452.git.stefan@agner.ch>
+References: <09f9b55b419ef01ad24998bbacb1a49976b58bfa.1627492452.git.stefan@agner.ch>
+From: Stefan Agner <stefan@agner.ch>
+Date: Mon, 19 Apr 2021 10:59:03 +0200
+Subject: [PATCH 11/11] package/rpi-firmware: bump version to 1.20210527
+
+Keep rpi-firmware up-to-date with the kernel version bump (tag
+1.20210527).
+
+Signed-off-by: Stefan Agner <stefan@agner.ch>
+---
+ package/rpi-firmware/rpi-firmware.hash | 2 +-
+ package/rpi-firmware/rpi-firmware.mk   | 2 +-
+ 2 files changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/package/rpi-firmware/rpi-firmware.hash b/package/rpi-firmware/rpi-firmware.hash
+index 0fd7a87bea..5130caf057 100644
+--- a/package/rpi-firmware/rpi-firmware.hash
++++ b/package/rpi-firmware/rpi-firmware.hash
+@@ -1,3 +1,3 @@
+ # Locally computed
+-sha256  d996fd1a2d53f692bf036d25981ecc690c126c88c51f60165fc7a568ed128b8f  rpi-firmware-fcf8d2f7639ad8d0330db9c8db9b71bd33eaaa28.tar.gz
++sha256  32fb5cc72703247622839c3cb4df2f369f91d2185770df867ac9758283bf5380  rpi-firmware-1eb8921ae7158249894f89e8bb6c4bfb04ec7377.tar.gz
+ sha256  c7283ff51f863d93a275c66e3b4cb08021a5dd4d8c1e7acc47d872fbe52d3d6b  boot/LICENCE.broadcom
+diff --git a/package/rpi-firmware/rpi-firmware.mk b/package/rpi-firmware/rpi-firmware.mk
+index ea82836900..ac4c4a0788 100644
+--- a/package/rpi-firmware/rpi-firmware.mk
++++ b/package/rpi-firmware/rpi-firmware.mk
+@@ -4,7 +4,7 @@
+ #
+ ################################################################################
+ 
+-RPI_FIRMWARE_VERSION = fcf8d2f7639ad8d0330db9c8db9b71bd33eaaa28
++RPI_FIRMWARE_VERSION = 1eb8921ae7158249894f89e8bb6c4bfb04ec7377
+ RPI_FIRMWARE_SITE = $(call github,raspberrypi,firmware,$(RPI_FIRMWARE_VERSION))
+ RPI_FIRMWARE_LICENSE = BSD-3-Clause
+ RPI_FIRMWARE_LICENSE_FILES = boot/LICENCE.broadcom
+-- 
+2.32.0
+

buildroot/CHANGES

@@ -1,3 +1,121 @@
+2021.02.5, released September 15th, 2021
+
+	Important / security related fixes.
+
+	Toolchain: Disable fortify support for Microblaze as it is not
+	currently working.
+
+	Updated/fixed packages: alsa-utils, arm-trusted-firmware,
+	bayer2rgb-neon, belle-sip, busybox, c-ares, cjson, coreutils,
+	cpio, eigen, environt-setup, fetchmail, fluidsynth,
+	fontconfig, gd, gdb, gnuradio, gnutls, go, haproxy, ipmiutil,
+	iputils, jszip, kvm-unit-tests, libarchive, libexif,
+	libgcrypt, libmodsecurity, libopenssl, librsvg, libshout,
+	libssh, linux, localedef, mc, mesa3d, mosquitto, netsniff-ng,
+	nginx, nodejs, ogre, openmpi, openvmtools, php, postgresql,
+	prelink-cross, prosody, protobuf, python-keyring,
+	python-matplotlib, python-pillow, python-pyudev,
+	python-secretstorage, python3, qt5base, samba4, sdl2, sox,
+	swupdate, sylpheed, tor, uboot-tools, uhd, unbound, vim,
+	wlroots, xapp_xrdb, xapp_xwd, xen, xenomai, xlib_libXfont2,
+	xlib_libXft, zip
+
+2021.02.4, released August 10th, 2021
+
+	Important / security related fixes.
+
+	Toolchain: Disable PIC/PIE for Microblaze (like for NIOS II)
+	as it is not currently working.
+
+	binutils: fix linker assert failure on OpenRisc, or1k build
+	issue with gcc < 5
+
+	gdb: Enable on NIOS II
+
+	utils/scanpypi: Various improvements
+
+	Defconfigs: stm32f469_disco: Fix kernel boot issue, Microchip
+	sam9x60ek mmc_dev: Add missing toolchain/system options
+
+	Updated/fixed packages: apache, arm-trusted-firmware, audit,
+	avahi, bind, binutils, bird, bluez5_utils, boinc, busybox,
+	chrony, clamav, cryptsetup, cwiid, dnsmasq, docker-cli,
+	docker-engine, dovecot, dovecot-pigeonhole, e2fsprogs, exiv2,
+	fail2ban, fb-test-app, feh, fetchmail, flac, fluxbox, gawk,
+	gcc, gcr, gdb, gdk-pixbuf, gesftpserver, glibc, go, gptfdisk,
+	granite, grub2, gqrx, guile, hdparm, heirloom-mailx,
+	ibrcommon, ibrdtn, ibrdtn-tools, ibrdtnd, intel-microcode,
+	iodine, irqbalance, keepalived, libass, libconfig, libcurl,
+	libfreeimage, libfuse3, libgcrypt, libgtk3, libgudev, libhtp,
+	libjson, libkrb5, libloki, libmodsecurity, libndp,
+	libnetfilter-log, libnfnetlink, libnice, libodb, libodb-boost,
+	libodb-mysql, libodb-pgsql, libpcap, libqmi, libressl,
+	librsvg, libtasn1, libtirpc, libuci, libxmlrpc,
+	linux-firmware, linuxptp, lrzsz, ltp-testsuite, lvm2, mariadb,
+	mbedtls, monit, mono, mosquitto, mpd, mpg123, mpv, nbd, neard,
+	netsnmp, nettle, nginx-modsecurity, nmap, nodejs, ntp,
+	openntpd, openpgm, openswan, pango, pcre2,
+	perl-crypt-openssl-rsa, php, pixman, polkit, postgresql,
+	proxychains-ng, putty, python, python-django,
+	python-dataproperty, python-pysftp, python-urllib3, python3,
+	qpdf, redis, ripgrep, ruby, samba4, spice, slirp, suricata,
+	sysdig, tcpdump, tftpd, thrift, tor, tpm2-tools, trinity,
+	uboot, uboot-tools, uclibc, util-linux, vlc, wireless-regdb,
+	wireshark, wolfssl, xapp_fonttosfnt, xlib_libX11,
+	xlib_libxshmfence, xserver_xorg-server
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#13586: grub failure with BR2_OPTIMIZE_3
+	#13661: host-python2 build fails on aarch64
+	#13836: package build failure when target install set to no..
+	#13846: BR2_PACKAGE_LVM2_STANDARD_INSTALL should be default to..
+
+2021.02.3, released June 12th, 2021
+
+	Important / security related fixes.
+
+	CPE meta data has been added for a large number of packages
+
+	Updated/fixed packages: acpid, apache, apcupsd, assimp, bird,
+	bitcoin, blktrace, boost, capnproto, chrony, dc3dd, dhcp,
+	directfb, dmalloc, docker-engine, ebtables, efibootmgr,
+	enlightenment, enscript, environment-setup, exempi, expat,
+	findutils, flatcc, fluidsynth, frr, gdb, go, gptfdisk, grpc,
+	gst1-plugins-bad, gst1-rtsp-server, gstreamer1, gupnp,
+	hostapd, hwloc, i2c-tools, iftop, imagemagick, imx-gpu-viv,
+	intel-mediadriver, intel-microcode, jquery-validation,
+	keepalived, kodi, less, libcamera, libcurl, libcutl, libesmtp,
+	libeXosip2, libffi, libfuse, libfuse3, libgeos, libgtk2,
+	libgtk3, libical, libidn, libidn2, libkcapi, libldns, libmms,
+	libmodbus, libmspack, libnids, libopenh264, liboping, libraw,
+	librelp, libsamplerate, libtirpc, libusb, libuv, libxcb,
+	libxml2, libxslt, live555, llvm, lmbench, localedef,
+	lttng-tools, lvm2, lz4, mesa3d, mimic, mini-snmpd, minidlna,
+	minissdpd, minizip, mono-gtksharp3, mpg123, mpv, msmtp, musl,
+	mutt, nasm, nbd, netperf, netsurf, nginx, odb, opencv3,
+	openssh, opentyrian, oprofile, p7zip, paho-mqtt-c, perl,
+	php-imagick, pifmrds, picocom, pigz, pngquant, poco,
+	postgresql, prosody, proxychains-ng, pulseaudio, putty, pwgen,
+	python-autobahn, python-bluezero, python-engineio,
+	python-keyring, python-pillow, python-requests, python-tqdm,
+	qemu, qpdf, qt5base, redis, refpolicy, rt-tests, runc,
+	shellinabox, squid, strace, supervisor, synergy, taglib,
+	tclap, terminology, thermald, tini, tinyproxy, tinyxml2,
+	tpm2-tss, uclibc, udisks, uhd, unscd, vlc, waylandpp,
+	webkitgtk, weston, wireshark, wpa_supplicant, wpewebkit,
+	xlib_libdmx, xlib_libFS, xlib_libICE, xlib_libX11,
+	xlib_libXcursor, xlib_libXdmcp, xlib_libXext, xlib_libXfixes,
+	xlib_libXfont2, xlib_libXinerama, xlib_libXpm, xlib_libXres,
+	xlib_libXt, xlib_libXtst, xlib_libXxf86dga, xlib_libXxf86vm,
+	xterm
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#13781: isc dhcp-server package don't create file /usr/bin/dhcpd
+	#13801: toolchainfile.cmake CMAKE_BUILD_TYPE
+	#13806: Building host-localedef fails on fedora 34/gcc 11
+
 2021.02.2, released May 12th, 2021
 
 	Important / security related fixes.

buildroot/Config.in

@@ -713,8 +713,17 @@ endmenu
 
 comment "Security Hardening Options"
 
+config BR2_PIC_PIE_ARCH_SUPPORTS
+	bool
+	default y
+	# Microblaze glibc toolchains don't work with PIC/PIE enabled
+	depends on !BR2_microblaze
+	# Nios2 toolchains produce non working binaries with -fPIC
+	depends on !BR2_nios2
+
 config BR2_PIC_PIE
 	bool "Build code with PIC/PIE"
+	depends on BR2_PIC_PIE_ARCH_SUPPORTS
 	depends on BR2_SHARED_LIBS
 	depends on BR2_TOOLCHAIN_SUPPORTS_PIE
 	help
@@ -722,6 +731,7 @@ config BR2_PIC_PIE
 	  Position-Independent Executables (PIE).
 
 comment "PIC/PIE needs a toolchain w/ PIE"
+	depends on BR2_PIC_PIE_ARCH_SUPPORTS
 	depends on BR2_SHARED_LIBS
 	depends on !BR2_TOOLCHAIN_SUPPORTS_PIE
 
@@ -808,6 +818,7 @@ config BR2_RELRO_PARTIAL
 
 config BR2_RELRO_FULL
 	bool "Full"
+	depends on BR2_PIC_PIE_ARCH_SUPPORTS
 	depends on BR2_TOOLCHAIN_SUPPORTS_PIE
 	select BR2_PIC_PIE
 	help
@@ -816,6 +827,7 @@ config BR2_RELRO_FULL
 	  program loading, i.e every time an executable is started.
 
 comment "RELRO Full needs a toolchain w/ PIE"
+	depends on BR2_PIC_PIE_ARCH_SUPPORTS
 	depends on !BR2_TOOLCHAIN_SUPPORTS_PIE
 
 endchoice
@@ -823,8 +835,15 @@ endchoice
 comment "RELocation Read Only (RELRO) needs shared libraries"
 	depends on !BR2_SHARED_LIBS
 
+config BR2_FORTIFY_SOURCE_ARCH_SUPPORTS
+	bool
+	default y
+	# Microblaze glibc toolchains don't work with Fortify Source enabled
+	depends on !BR2_microblaze
+
 choice
 	bool "Buffer-overflow Detection (FORTIFY_SOURCE)"
+	depends on BR2_FORTIFY_SOURCE_ARCH_SUPPORTS
 	depends on BR2_TOOLCHAIN_USES_GLIBC
 	depends on !BR2_OPTIMIZE_0
 	help
@@ -865,6 +884,7 @@ config BR2_FORTIFY_SOURCE_2
 endchoice
 
 comment "Fortify Source needs a glibc toolchain and optimization"
+	depends on BR2_FORTIFY_SOURCE_ARCH_SUPPORTS
 	depends on (!BR2_TOOLCHAIN_USES_GLIBC || BR2_OPTIMIZE_0)
 endmenu
 

buildroot/Config.in.legacy

@@ -146,6 +146,12 @@ endif
 
 comment "Legacy options removed in 2021.02"
 
+config BR2_PACKAGE_GNURADIO_PAGER
+	bool "gnuradio gr-flex support removed"
+	select BR2_LEGACY
+	help
+	  gr-flex has been removed from gnuradio since version 3.8.0.0.
+
 config BR2_PACKAGE_SCONESERVER_HTTP_SCONESITE_IMAGE
 	bool "sconeserver http::sconesite::image removed"
 	select BR2_LEGACY

buildroot/DEVELOPERS

@@ -122,10 +122,7 @@ F:	package/python-docopt/
 N:	Anders Darander <anders@chargestorm.se>
 F:	package/ktap/
 
-N:	André Hentschel <nerv@dawncrow.de>
-F:	board/freescale/imx8qxpmek/
-F:	configs/freescale_imx8qxpmek_defconfig
-F:	package/freescale-imx/imx-sc-firmware/
+N:	André Zwing <nerv@dawncrow.de>
 F:	package/libkrb5/
 F:	package/openal/
 F:	package/p7zip/
@@ -180,6 +177,9 @@ F:	package/sshguard/
 F:	package/sunwait/
 F:	package/sysdig/
 
+N:	Andy Shevchenko <andy.shevchenko@gmail.com>
+F:	package/fb-test-app/
+
 N:	Anisse Astier <anisse@astier.eu>
 F:	package/go/
 F:	package/nghttp2/
@@ -309,6 +309,7 @@ F:	package/apache/
 F:	package/apr/
 F:	package/apr-util/
 F:	package/bcg729/
+F:	package/bitcoin/
 F:	package/bluez-tools/
 F:	package/boinc/
 F:	package/clamav/
@@ -331,8 +332,12 @@ F:	package/gkrellm/
 F:	package/gli/
 F:	package/glmark2/
 F:	package/gpsd/
+F:	package/gptfdisk/
 F:	package/hdparm/
 F:	package/inih/
+F:	package/intel-gmmlib/
+F:	package/intel-mediadriver/
+F:	package/intel-mediasdk/
 F:	package/jsoncpp/
 F:	package/kodi*
 F:	package/lame/
@@ -487,16 +492,6 @@ F:	package/libsvg-cairo/
 N:	Cédric Chépied <cedric.chepied@gmail.com>
 F:	package/znc/
 
-N:	Chakra Divi <chakra@openedev.com>
-F:	board/friendlyarm/nanopi-m1
-F:	board/friendlyarm/nanopi-m1-plus
-F:	board/olimex/a13_olinuxino
-F:	board/orangepi/orangepi-plus
-F:	configs/friendlyarm_nanopi_m1_defconfig
-F:	configs/friendlyarm_nanopi_m1_plus_defconfig
-F:	configs/olimex_a13_olinuxino_defconfig
-F:	configs/orangepi_plus_defconfig
-
 N:	Chris Packham <judge.packham@gmail.com>
 F:	package/coremark/
 F:	package/coremark-pro/
@@ -524,7 +519,7 @@ F:	package/rtl8821au/
 F:	package/runc/
 F:	package/tini/
 
-N:	Christophe Priouzeau <christophe.priouzeau@st.com>
+N:	Christophe Priouzeau <christophe.priouzeau@foss.st.com>
 F:	board/stmicroelectronics/stm32f429-disco/
 F:	board/stmicroelectronics/stm32f469-disco/
 F:	configs/stm32f429_disco_defconfig
@@ -673,6 +668,7 @@ F:	package/ipcalc/
 
 N:	Dick Olsson <hi@senzilla.io>
 F:	package/bearssl/
+F:	package/bitcoin/
 F:	package/execline/
 F:	package/mdevd/
 F:	package/s6-dns/
@@ -1028,12 +1024,18 @@ F:	package/xapian/
 
 N:	Giulio Benetti <giulio.benetti@benettiengineering.com>
 F:	package/at/
+F:	package/binutils/
+F:	package/gcc/
+F:	package/harfbuzz/
+F:	package/libfuse3/
 F:	package/libnspr/
 F:	package/libnss/
 F:	package/minicom/
 F:	package/nfs-utils/
 F:	package/sunxi-mali-mainline/
 F:	package/sunxi-mali-mainline-driver/
+F:	package/udisks/
+F:	toolchain/
 
 N:	Gregory Dymarek <gregd72002@gmail.com>
 F:	package/ding-libs/
@@ -1242,11 +1244,6 @@ F:	package/sysrepo/
 N:	Jan Pedersen <jp@jp-embedded.com>
 F:	package/zip/
 
-N:	Jan Viktorin <viktorin@rehivetech.com>
-F:	package/python-pexpect/
-F:	package/python-ptyprocess/
-F:	package/zynq-boot-bin/
-
 N:	Jarkko Sakkinen <jarkko.sakkinen@intel.com>
 F:	package/quota/
 
@@ -1828,36 +1825,6 @@ F:	arch/Config.in.xtensa
 N:	Maxim Kochetkov <fido_max@inbox.ru>
 F:	package/timescaledb/
 
-N:	Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
-F:	package/babeld/
-F:	package/dante/
-F:	package/faifa/
-F:	package/initscripts/
-F:	package/intel-microcode/
-F:	package/iucode-tool/
-F:	package/jasper/
-F:	package/kodi/
-F:	package/libass/
-F:	package/libbluray/
-F:	package/libcdio/
-F:	package/libcofi/
-F:	package/libenca/
-F:	package/libmodplug/
-F:	package/libnfs/
-F:	package/libplist/
-F:	package/libshairplay/
-F:	package/linux-zigbee/
-F:	package/netcat-openbsd/
-F:	package/open-plc-utils/
-F:	package/rpi-firmware/
-F:	package/rpi-userland/
-F:	package/rtmpdump/
-F:	package/skeleton/
-F:	package/systemd/
-F:	package/systemd-bootchart/
-F:	package/tinyalsa/
-F:	package/tinyxml/
-
 N:	Michael Durrant <mdurrant@arcturusnetworks.com>
 F:	board/arcturus/
 F:	configs/arcturus_ucp1020_defconfig
@@ -2138,6 +2105,7 @@ F:	package/libtirpc/
 F:	package/linux-backports/
 F:	package/ltp-testsuite/
 F:	package/nfs-utils/
+F:	package/rpcbind/
 F:	support/kconfig/
 
 N:	Phil Eichinger <phil.eichinger@gmail.com>
@@ -2215,7 +2183,7 @@ F:	package/nanomsg/
 N:	Ramon Fried <rfried.dev@gmail.com>
 F:	package/bitwise/
 
-N:	Raphaël Mélotte <raphael.melotte@essensium.com>
+N:	Raphaël Mélotte <raphael.melotte@mind.be>
 F:	package/jbig2dec/
 F:	package/python-boto3/
 F:	package/python-botocore/
@@ -2506,9 +2474,6 @@ F:	configs/rock_pi_n10_defconfig
 F:	configs/rockpro64_defconfig
 F:	package/arm-gnu-a-toolchain/
 
-N:	Sven Fischer <sven@leiderfischer.de>
-F:	package/qt5/qt5remoteobjects/
-
 N:	Sven Haardiek <sven.haardiek@iotec-gmbh.de>
 F:	package/lcdproc/
 F:	package/python-influxdb/
@@ -2730,9 +2695,6 @@ F:	package/casync/
 F:	package/gloox/
 F:	package/tpm2-pkcs11/
 
-N:	Yann CARDAILLAC <ycardaillac@sepro-group.com>
-F:	package/open62541/
-
 N:	Yann E. MORIN <yann.morin.1998@free.fr>
 F:	board/friendlyarm/nanopi-neo/
 F:	configs/friendlyarm_nanopi_neo_defconfig

buildroot/Makefile

@@ -92,9 +92,9 @@ all:
 .PHONY: all
 
 # Set and export the version string
-export BR2_VERSION := 2021.02.2
+export BR2_VERSION := 2021.02.5
 # Actual time the release is cut (for reproducible builds)
-BR2_VERSION_EPOCH = 1620810000
+BR2_VERSION_EPOCH = 1631718000
 
 # Save running make version since it's clobbered by the make package
 RUNNING_MAKE_VERSION := $(MAKE_VERSION)
@@ -1140,6 +1140,7 @@ help:
 	@echo '  <pkg>-dirclean         - Remove <pkg> build directory'
 	@echo '  <pkg>-reconfigure      - Restart the build from the configure step'
 	@echo '  <pkg>-rebuild          - Restart the build from the build step'
+	@echo '  <pkg>-reinstall        - Restart the build from the install step'
 	$(foreach p,$(HELP_PACKAGES), \
 		@echo $(sep) \
 		@echo '$($(p)_NAME):' $(sep) \

buildroot/README

@@ -20,7 +20,7 @@ Buildroot comes with a basic configuration for a number of boards. Run
 
 Please feed suggestions, bug reports, insults, and bribes back to the
 buildroot mailing list: buildroot@buildroot.org
-You can also find us on #buildroot on Freenode IRC.
+You can also find us on #buildroot on OFTC IRC.
 
 If you would like to contribute patches, please read
 https://buildroot.org/manual.html#submitting-patches

buildroot/board/stmicroelectronics/stm32f469-disco/extlinux.conf

@@ -0,0 +1,4 @@
+label stm32f469-disco-buildroot
+  kernel /zImage
+  devicetree /stm32f469-disco.dtb
+  append console=ttySTM0,115200 root=/dev/mmcblk0p2 rw rootfstype=ext2 rootwait earlyprintk consoleblank=0 ignore_loglevel

buildroot/board/stmicroelectronics/stm32f469-disco/flash.sh

@@ -13,8 +13,6 @@ ${OUTPUT_DIR}/host/bin/openocd -f board/stm32f469discovery.cfg \
   -c "reset init" \
   -c "flash probe 0" \
   -c "flash info 0" \
-  -c "flash write_image erase ${OUTPUT_DIR}/images/stm32f469i-disco.bin 0x08000000" \
-  -c "flash write_image erase ${OUTPUT_DIR}/images/stm32f469-disco.dtb 0x08004000" \
-  -c "flash write_image erase ${OUTPUT_DIR}/images/xipImage 0x08008000" \
+  -c "flash write_image erase ${OUTPUT_DIR}/images/u-boot.bin 0x08000000" \
   -c "reset run" \
   -c "shutdown"

buildroot/board/stmicroelectronics/stm32f469-disco/genimage.cfg

@@ -0,0 +1,27 @@
+image boot.vfat {
+	vfat {
+		files = {
+			"zImage",
+			"stm32f469-disco.dtb",
+			"extlinux"
+		}
+	}
+	size = 16M
+}
+
+image sdcard.img {
+	hdimage {
+	}
+
+	partition u-boot {
+		partition-type = 0xC
+                image = "boot.vfat"
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext2"
+		size = 32M
+	}
+}
+

buildroot/board/stmicroelectronics/stm32f469-disco/linux.fragment

@@ -0,0 +1 @@
+# CONFIG_XIP_KERNEL is not set

buildroot/board/stmicroelectronics/stm32f469-disco/patches/linux/0001-ARM-stm32f249-disco-don-t-force-init-in-chosen-boota.patch

@@ -1,33 +0,0 @@
-From c8f8f33c2f0460a34c9545b01a7972a7ed2df0e9 Mon Sep 17 00:00:00 2001
-From: Christophe Priouzeau <christophe.priouzeau@st.com>
-Date: Mon, 29 May 2017 13:38:16 +0200
-Subject: [PATCH] ARM: stm32f249-disco: don't force init= in /chosen/bootargs
-
-There is no reason to override the kernel's default init= value, as
-this breaks userspace that assumes the kernel default of /init is
-used. Since stm32 is often used with a minimal bootloader
-(afboot-stm32) that doesn't provide any mechanism to override the DTB,
-we need to adjust the kernel command line in the Device Tree source.
-
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-Signed-off-by: Christophe Priouzeau <christophe.priouzeau@st.com>
----
- arch/arm/boot/dts/stm32f469-disco.dts | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts
-index 0dd56ef..93ee1b2 100644
---- a/arch/arm/boot/dts/stm32f469-disco.dts
-+++ b/arch/arm/boot/dts/stm32f469-disco.dts
-@@ -53,7 +53,7 @@
- 	compatible = "st,stm32f469i-disco", "st,stm32f469";
- 
- 	chosen {
--		bootargs = "root=/dev/ram rdinit=/linuxrc";
-+		bootargs = "root=/dev/ram";
- 		stdout-path = "serial0:115200n8";
- 	};
- 
--- 
-2.7.4
-

buildroot/board/stmicroelectronics/stm32f469-disco/post-build.sh

@@ -0,0 +1,4 @@
+#!/bin/sh
+BOARD_DIR="$(dirname $0)"
+
+install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf

buildroot/board/stmicroelectronics/stm32f469-disco/readme.txt

@@ -15,5 +15,17 @@ Flashing
 
   ./board/stmicroelectronics/stm32f469-disco/flash.sh output/
 
-It will flash the minimal bootloader, the Device Tree Blob, and the
-kernel image which includes the root filesystem as initramfs.
+It will flash the U-boot bootloader.
+
+Creating SD card
+----------------
+
+Buildroot prepares an"sdcard.img" image in the output/images/ directory,
+ready to be dumped on a SD card. Launch the following command as root:
+
+  dd if=output/images/sdcard.img of=/dev/<your-sd-device>
+
+*** WARNING! This will destroy all the card content. Use with care! ***
+
+For details about the medium image layout and its content, see the
+definition in board/stmicroelectronics/stm32f469-disco/genimage.cfg.

buildroot/boot/arm-trusted-firmware/Config.in

@@ -175,4 +175,28 @@ config BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN
 	  Select this option if your ATF board configuration requires
 	  an ARM32 bare metal toolchain to be available.
 
+config BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP
+	bool "Build with SSP"
+	default y
+	depends on BR2_TOOLCHAIN_HAS_SSP
+	depends on !BR2_SSP_NONE
+	help
+	  Say 'y' here if you want to build ATF with SSP.
+
+	  Your board must have SSP support in ATF: it must have an
+	  implementation for plat_get_stack_protector_canary().
+
+	  If you say 'y', the SSP level will be the level selected
+	  by the global SSP setting.
+
+config BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP_LEVEL
+	string
+	# While newer versions of TF-A support "none" as
+	# ENABLE_STACK_PROTECTOR value, older versions (e.g 2.0) only
+	# supported "0" to disable SSP.
+	default "0"    	  if !BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP
+	default "default" if BR2_SSP_REGULAR
+	default "strong"  if BR2_SSP_STRONG
+	default "all"     if BR2_SSP_ALL
+
 endif

buildroot/boot/arm-trusted-firmware/arm-trusted-firmware.mk

@@ -53,6 +53,10 @@ ARM_TRUSTED_FIRMWARE_MAKE_OPTS += \
 	$(call qstrip,$(BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES)) \
 	PLAT=$(ARM_TRUSTED_FIRMWARE_PLATFORM)
 
+ARM_TRUSTED_FIRMWARE_MAKE_ENV += \
+	$(TARGET_MAKE_ENV) \
+	ENABLE_STACK_PROTECTOR=$(call qstrip,$(BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP_LEVEL))
+
 ifeq ($(BR2_ARM_CPU_ARMV7A),y)
 ARM_TRUSTED_FIRMWARE_MAKE_OPTS += ARM_ARCH_MAJOR=7
 else ifeq ($(BR2_ARM_CPU_ARMV8A),y)
@@ -100,14 +104,6 @@ ARM_TRUSTED_FIRMWARE_MAKE_OPTS += MV_DDR_PATH=$(MV_DDR_MARVELL_DIR)
 ARM_TRUSTED_FIRMWARE_DEPENDENCIES += mv-ddr-marvell
 endif
 
-ifeq ($(BR2_SSP_REGULAR),y)
-ARM_TRUSTED_FIRMWARE_MAKE_OPTS += ENABLE_STACK_PROTECTOR=default
-else ifeq ($(BR2_SSP_STRONG),y)
-ARM_TRUSTED_FIRMWARE_MAKE_OPTS += ENABLE_STACK_PROTECTOR=strong
-else ifeq ($(BR2_SSP_ALL),y)
-ARM_TRUSTED_FIRMWARE_MAKE_OPTS += ENABLE_STACK_PROTECTOR=all
-endif
-
 ARM_TRUSTED_FIRMWARE_MAKE_TARGETS = all
 
 ifeq ($(BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP),y)
@@ -162,7 +158,8 @@ ARM_TRUSTED_FIRMWARE_MAKE_TARGETS += \
 
 define ARM_TRUSTED_FIRMWARE_BUILD_CMDS
 	$(ARM_TRUSTED_FIRMWARE_BUILD_FIPTOOL)
-	$(TARGET_MAKE_ENV) $(MAKE) -C $(@D) $(ARM_TRUSTED_FIRMWARE_MAKE_OPTS) \
+	$(ARM_TRUSTED_FIRMWARE_MAKE_ENV) $(MAKE) -C $(@D) \
+		$(ARM_TRUSTED_FIRMWARE_MAKE_OPTS) \
 		$(ARM_TRUSTED_FIRMWARE_MAKE_TARGETS)
 	$(ARM_TRUSTED_FIRMWARE_BL31_UBOOT_BUILD)
 endef

buildroot/boot/grub2/grub2.mk

@@ -118,9 +118,11 @@ HOST_GRUB2_CONF_ENV = \
 GRUB2_CONF_ENV = \
 	CPP="$(TARGET_CC) -E" \
 	TARGET_CC="$(TARGET_CC)" \
-	TARGET_CFLAGS="$(TARGET_CFLAGS)" \
-	TARGET_CPPFLAGS="$(TARGET_CPPFLAGS) -fno-stack-protector" \
-	TARGET_LDFLAGS="$(TARGET_LDFLAGS)" \
+	CFLAGS="$(TARGET_CFLAGS) -Os" \
+	TARGET_CFLAGS="$(TARGET_CFLAGS) -Os" \
+	CPPFLAGS="$(TARGET_CPPFLAGS) -Os -fno-stack-protector" \
+	TARGET_CPPFLAGS="$(TARGET_CPPFLAGS) -Os -fno-stack-protector" \
+	TARGET_LDFLAGS="$(TARGET_LDFLAGS) -Os" \
 	TARGET_NM="$(TARGET_NM)" \
 	TARGET_OBJCOPY="$(TARGET_OBJCOPY)" \
 	TARGET_STRIP="$(TARGET_CROSS)strip"

buildroot/boot/uboot/uboot.mk

@@ -17,7 +17,7 @@ UBOOT_CPE_ID_PRODUCT = u-boot
 UBOOT_INSTALL_IMAGES = YES
 
 # u-boot 2020.01+ needs make 4.0+
-UBOOT_DEPENDENCIES = $(BR2_MAKE_HOST_DEPENDENCY)
+UBOOT_DEPENDENCIES = host-pkgconf $(BR2_MAKE_HOST_DEPENDENCY)
 UBOOT_MAKE = $(BR2_MAKE)
 
 ifeq ($(UBOOT_VERSION),custom)
@@ -307,6 +307,11 @@ define UBOOT_BUILD_CMDS
 		cp -f $(UBOOT_CUSTOM_DTS_PATH) $(@D)/arch/$(UBOOT_ARCH)/dts/
 	)
 	$(TARGET_CONFIGURE_OPTS) \
+		PKG_CONFIG="$(PKG_CONFIG_HOST_BINARY)" \
+		PKG_CONFIG_SYSROOT_DIR="/" \
+		PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 \
+		PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 \
+		PKG_CONFIG_LIBDIR="$(HOST_DIR)/lib/pkgconfig:$(HOST_DIR)/share/pkgconfig" \
 		$(UBOOT_MAKE) -C $(@D) $(UBOOT_MAKE_OPTS) \
 		$(UBOOT_MAKE_TARGET)
 	$(if $(BR2_TARGET_UBOOT_FORMAT_SD),

buildroot/configs/microchip_sam9x60ek_mmc_dev_defconfig

@@ -1,6 +1,10 @@
 BR2_arm=y
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_4=y
+BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
+BR2_PTHREAD_DEBUG=y
+BR2_TOOLCHAIN_BUILDROOT_CXX=y
 BR2_TARGET_GENERIC_HOSTNAME="sam9x60ek"
+BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
 BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/microchip/sam9x60ek_mmc/genimage.cfg"
 BR2_LINUX_KERNEL=y

buildroot/configs/pc_x86_64_bios_defconfig

@@ -23,13 +23,13 @@ BR2_ROOTFS_POST_BUILD_SCRIPT="board/pc/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/pc/genimage-bios.cfg"
 
-# Linux headers same as kernel, a 4.18 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_18=y
+# Linux headers same as kernel, a 4.19 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.18.10"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.204"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/pc/linux.config"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y

buildroot/configs/pc_x86_64_efi_defconfig

@@ -25,13 +25,13 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/pc/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/pc/post-image-efi.sh"
 
-# Linux headers same as kernel, a 4.18 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_18=y
+# Linux headers same as kernel, a 4.19 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.18.10"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.204"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/pc/linux.config"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y