Bump version to 6.1

(cherry picked from commit e5933c4ed4)

.dockerignore

@@ -3,5 +3,9 @@ buildroot/
 buildroot-external/
 buildroot-patches/
 
-# Ignore too
+# Release directory gets created using build scripts
 release/
+
+# Ignore hidden directories as well
+.git/
+.github/

.github/ISSUE_TEMPLATE.md

@@ -12,13 +12,13 @@
 
 **Hardware Environment**
 <!--
-Describe the Homme Assistant image you are using and the hardare environemnt
+Describe the Home Assistant image you are using and the hardware environment
 -->
 - [ ] Raspberry Pi [1/2/3/4]
 - [ ] ODROID [C2/C4/N2(+)/XU4]
 - [ ] ASUS Tinker [S]
-- [ ] Intel NUC (or compatible)
-- [ ] OVA (Open Virtualization Applicance, on Intel NUC or any other hardware, please add the Hypervisor you are using)
+- [ ] Generic x86-64 (like Intel NUC)
+- [ ] OVA (Open Virtualization Appliance, on Intel NUC or any other hardware, please add the Hypervisor you are using)
 
 **Home Assistant OS release:**
 - [ ] Fresh installation of release x.y
@@ -50,5 +50,5 @@ Describe the Homme Assistant image you are using and the hardare environemnt
 <!--
 - Is the problem reproducible?
 - Has this been working before (is this a regression?)
-- Has there been attempt to rule out harware issues? (different SD card etc.)
+- Has there been attempt to rule out hardware issues? (different SD card etc.)
 -->

.github/release-drafter.yml

@@ -7,12 +7,14 @@ categories:
     label: 'board/raspberrypi'
   - title: 'Open Virtual Appliance'
     label: 'board/ova'
-  - title: 'Intel NUC'
-    label: 'board/intel-nuc'
+  - title: 'Generic x86-64'
+    label: 'board/generic-x86-64'
   - title: 'Hardkernel ODROID'
-    label: 'board/hardkernel'
+    label: 'board/odroid'
   - title: 'ASUS Tinker'
     label: 'board/tinker'
+filter-by-commitish: true
+commitish: dev
 template: |
   ## Changes
 

.github/workflows/dev.yml

@@ -37,7 +37,7 @@ jobs:
       matrix:
         board:
           - {"name": "ova", "output": "ova", "runner": "x86-64-runner"}
-          - {"name": "intel_nuc", "output": "intel-nuc", "runner": "x86-64-runner"}
+          - {"name": "generic_x86_64", "output": "generic-x86-64", "runner": "x86-64-runner"}
           - {"name": "odroid_c2", "output": "odroid-c2", "runner": "aarch64-runner"}
           - {"name": "odroid_c4", "output": "odroid-c4", "runner": "aarch64-runner"}
           - {"name": "odroid_n2", "output": "odroid-n2", "runner": "aarch64-runner"}
@@ -74,7 +74,7 @@ jobs:
           docker run --rm --privileged -v "${GITHUB_WORKSPACE}:/build" \
             -e BUILDER_UID="${BUILDER_UID}" -e BUILDER_GID="${BUILDER_GID}" \
             -v "${{ matrix.board.runner }}-build-cache:/cache" \
-            haos-builder make VERSION_DEV=${{ needs.version.outputs.version_dev }} ${{ matrix.board.name }}
+            haos-builder make BUILDDIR=/build VERSION_DEV=${{ needs.version.outputs.version_dev }} ${{ matrix.board.name }}
 
       - name: Upload images
         uses: appleboy/scp-action@master
@@ -87,3 +87,23 @@ jobs:
           target: ${{ secrets.DEV_TARGET_PATH }}/${{ needs.version.outputs.version_main }}.${{ needs.version.outputs.version_dev }}/
           strip_components: 1
 
+  bump_version:
+    name: Bump dev version to ${{ needs.version.outputs.version_main }}.${{ needs.version.outputs.version_dev }}
+    needs: [ build, version ]
+    runs-on: [ "ubuntu-20.04" ]
+
+    steps:
+    - name: Initialize git
+      uses: home-assistant/actions/helpers/git-init@master
+      with:
+        name: ${{ secrets.GIT_NAME }}
+        email: ${{ secrets.GIT_EMAIL }}
+        token: ${{ secrets.GIT_TOKEN }}
+
+    - name: Bump Home Assistant OS dev version
+      uses: home-assistant/actions/helpers/version-push@master
+      with:
+        key: "hassos[]"
+        key-description: "Home Assistant OS"
+        version: ${{ needs.version.outputs.version_main }}.${{ needs.version.outputs.version_dev }}
+        channel: "dev"

.github/workflows/release.yml

@@ -12,6 +12,7 @@ jobs:
     runs-on: [ "ubuntu-20.04" ]
     outputs:
       version: ${{ steps.version_check.outputs.version }}
+      version_dev: ${{ steps.version_check.outputs.version_dev }}
     steps:
       - uses: actions/checkout@v2
       - name: Validate version
@@ -19,11 +20,20 @@ jobs:
         run: |
           major=$(cat ${GITHUB_WORKSPACE}/buildroot-external/meta | grep VERSION_MAJOR | cut -d'=' -f2)
           build=$(cat ${GITHUB_WORKSPACE}/buildroot-external/meta | grep VERSION_BUILD | cut -d'=' -f2)
-          if [ "${major}.${build}" != "${{ github.event.release.tag_name }}" ]; then
+          tag_major=$(echo "${{ github.event.release.tag_name }}" | cut -d '.' -f 1)
+          tag_build=$(echo "${{ github.event.release.tag_name }}" | cut -d '.' -f 2)
+          tag_dev=$(echo "${{ github.event.release.tag_name }}" | cut -d '.' -f 3)
+          if [ "${major}.${build}" != "${tag_major}.${tag_build}" ]; then
             echo "Version number in Buildroot metadata is does not match tag (${major}.${build} vs ${{ github.event.release.tag_name }})."
             exit 1
           fi
-          echo "::set-output name=version::${major}.${build}"
+          if [ "" != "${tag_dev}" ]; then
+            echo "Note: Release build with custom dev part: ${tag_dev}."
+            echo "::set-output name=version::${major}.${build}.${tag_dev}"
+          else
+            echo "::set-output name=version::${major}.${build}"
+          fi
+          echo "::set-output name=version_dev::${tag_dev}"
 
   build:
     name: Release build for ${{ matrix.board.name }}
@@ -32,7 +42,7 @@ jobs:
       matrix:
         board:
           - {"name": "ova", "output": "ova", "runner": "x86-64-runner"}
-          - {"name": "intel_nuc", "output": "intel-nuc", "runner": "x86-64-runner"}
+          - {"name": "generic_x86_64", "output": "generic-x86-64", "runner": "x86-64-runner"}
           - {"name": "odroid_c2", "output": "odroid-c2", "runner": "aarch64-runner"}
           - {"name": "odroid_c4", "output": "odroid-c4", "runner": "aarch64-runner"}
           - {"name": "odroid_n2", "output": "odroid-n2", "runner": "aarch64-runner"}
@@ -69,7 +79,7 @@ jobs:
           docker run --rm --privileged -v "${GITHUB_WORKSPACE}:/build" \
             -e BUILDER_UID="${BUILDER_UID}" -e BUILDER_GID="${BUILDER_GID}" \
             -v "${{ matrix.board.runner }}-build-cache:/cache" \
-            haos-builder make VERSION_DEV="" ${{ matrix.board.name }}
+            haos-builder make BUILDDIR=/build VERSION_DEV=${{ needs.validate_release.outputs.version_dev }} ${{ matrix.board.name }}
 
       - name: Upload disk image
         if: ${{ matrix.board.name != 'ova' }}
@@ -78,8 +88,8 @@ jobs:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
         with:
           upload_url: ${{ github.event.release.upload_url }}
-          asset_path: ${{ github.workspace }}/release/hassos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.img.xz
-          asset_name: hassos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.img.xz
+          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.img.xz
+          asset_name: haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.img.xz
           asset_content_type: application/x-xz
 
       - name: Upload rauc update
@@ -88,10 +98,21 @@ jobs:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
         with:
           upload_url: ${{ github.event.release.upload_url }}
-          asset_path: ${{ github.workspace }}/release/hassos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.raucb
-          asset_name: hassos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.raucb
+          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.raucb
+          asset_name: haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.raucb
           asset_content_type: application/octet-stream
 
+      - name: Upload ova image
+        if: ${{ matrix.board.name == 'ova' }}
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+        with:
+          upload_url: ${{ github.event.release.upload_url }}
+          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.ova
+          asset_name: haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.ova
+          asset_content_type: application/x-tar
+
       - name: Upload qcow2 image
         if: ${{ matrix.board.name == 'ova' }}
         uses: actions/upload-release-asset@v1
@@ -99,8 +120,8 @@ jobs:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
         with:
           upload_url: ${{ github.event.release.upload_url }}
-          asset_path: ${{ github.workspace }}/release/hassos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.qcow2.xz
-          asset_name: hassos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.qcow2.xz
+          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.qcow2.xz
+          asset_name: haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.qcow2.xz
           asset_content_type: application/x-xz
 
       - name: Upload vdi image
@@ -110,9 +131,9 @@ jobs:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
         with:
           upload_url: ${{ github.event.release.upload_url }}
-          asset_path: ${{ github.workspace }}/release/hassos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.vdi.xz
-          asset_name: hassos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.vdi.xz
-          asset_content_type: application/x-xz
+          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.vdi.zip
+          asset_name: haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.vdi.zip
+          asset_content_type: application/zip
 
       - name: Upload vhdx image
         if: ${{ matrix.board.name == 'ova' }}
@@ -121,9 +142,9 @@ jobs:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
         with:
           upload_url: ${{ github.event.release.upload_url }}
-          asset_path: ${{ github.workspace }}/release/hassos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.vhdx.xz
-          asset_name: hassos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.vhdx.xz
-          asset_content_type: application/x-xz
+          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.vhdx.zip
+          asset_name: haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.vhdx.zip
+          asset_content_type: application/zip
 
       - name: Upload vmdk image
         if: ${{ matrix.board.name == 'ova' }}
@@ -132,9 +153,9 @@ jobs:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
         with:
           upload_url: ${{ github.event.release.upload_url }}
-          asset_path: ${{ github.workspace }}/release/hassos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.vmdk.xz
-          asset_name: hassos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.vmdk.xz
-          asset_content_type: application/x-xz
+          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.vmdk.zip
+          asset_name: haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.vmdk.zip
+          asset_content_type: application/zip
 
   bump_version:
     name: Bump dev version to ${{ needs.validate_release.outputs.version }}
@@ -149,10 +170,10 @@ jobs:
         email: ${{ secrets.GIT_EMAIL }}
         token: ${{ secrets.GIT_TOKEN }}
 
-    - name: Bump Home Assistant OS dev version
+    - name: Bump Home Assistant OS beta version
       uses: home-assistant/actions/helpers/version-push@master
       with:
         key: "hassos[]"
         key-description: "Home Assistant OS"
         version: ${{ needs.validate_release.outputs.version }}
-        channel: "dev"
+        channel: "beta"

Dockerfile

@@ -36,6 +36,7 @@ RUN apt-get update && apt-get install -y --no-install-recommends \
         rsync \
         sudo \
         unzip \
+        zip \
         wget \
         qemu-utils \
         openssh-client \

Documentation/boards/README.md

@@ -17,12 +17,12 @@ The following boards/devices are supported:
   - Odroid-C4 (_experimental_)
   - Odroid-N2
   - Odroid-XU4
-- Intel NUC
+- Generic x86-64 (UEFI, not suited for virtualization)
   - Intel NUC5CPYH
   - Intel NUC6CAYH
   - Intel NUC10I3FNK2
   - Gigabyte GB-BPCE-3455
-  - Others recent Intel NUC computers are likely to work too, only those listed above have been tested.
+  - Computers supporting x64-64 architecture and UEFI boot should generally work
 - Asus
   - Tinker Board
 - Virtual appliance (x86_64/UEFI):
@@ -39,17 +39,17 @@ Notes:
 
 |Board|Build|Config|Docs|
 |-----|----|------|----|
-|Pi4B 32-bit |`make rpi4`      |[rpi4](../../buildroot-external/configs/rpi4_defconfig)|[raspberrypi](./raspberrypi/)|
-|Pi4B 64-bit |`make rpi4_64`   |[rpi4_64](../../buildroot-external/configs/rpi4_64_defconfig)|[raspberrypi](./raspberrypi/)|
-|Pi3B 32-bit |`make rpi3`      |[rpi3](../../buildroot-external/configs/rpi3_defconfig)|[raspberrypi](./raspberrypi/)|
-|Pi3B 64-bit |`make rpi3_64`   |[rpi3_64](../../buildroot-external/configs/rpi3_64_defconfig)|[raspberrypi](./raspberrypi/)|
-|Pi2         |`make rpi2`      |[rpi2](../../buildroot-external/configs/rpi2_defconfig)|[raspberrypi](./raspberrypi/)|
-|Pi Zero     |`make rpi0_w`    |[rpi0_w](../../buildroot-external/configs/rpi0_w_defconfig)|[raspberrypi](./raspberrypi/)|
-|Pi          |`make rpi`       |[rpi](../../buildroot-external/configs/rpi_defconfig)|[raspberrypi](./raspberrypi/)|
-|Odroid-C2   |`make odroid_c2` |[odroid_c2](../../buildroot-external/configs/odroid_c2_defconfig)|[hardkernel](./hardkernel/)|
-|Odroid-C4   |`make odroid_c4` |[odroid_c4](../../buildroot-external/configs/odroid_c4_defconfig)|[hardkernel](./hardkernel/)|
-|Odroid-N2   |`make odroid_n2` |[odroid_n2](../../buildroot-external/configs/odroid_n2_defconfig)|[hardkernel](./hardkernel/)|
-|Odroid-XU4  |`make odroid_xu4`|[odroid_xu4](../../buildroot-external/configs/odroid_xu4_defconfig)|[hardkernel](./hardkernel/)|
-|NUC         |`make intel_nuc` |[intel_nuc](../../buildroot-external/configs/intel_nuc_defconfig)|[intel](./intel/)|
-|Tinker Board|`make tinker`    |[tinker](../../buildroot-external/configs/tinker_defconfig)|[asus](./asus/)|
-|OVA         |`make ova`       |[ova](../../buildroot-external/configs/ova_defconfig)|[ova](./ova/)|
+|Pi4B 32-bit    |`make rpi4`           |[rpi4](../../buildroot-external/configs/rpi4_defconfig)|[raspberrypi](./raspberrypi/)|
+|Pi4B 64-bit    |`make rpi4_64`        |[rpi4_64](../../buildroot-external/configs/rpi4_64_defconfig)|[raspberrypi](./raspberrypi/)|
+|Pi3B 32-bit    |`make rpi3`           |[rpi3](../../buildroot-external/configs/rpi3_defconfig)|[raspberrypi](./raspberrypi/)|
+|Pi3B 64-bit    |`make rpi3_64`        |[rpi3_64](../../buildroot-external/configs/rpi3_64_defconfig)|[raspberrypi](./raspberrypi/)|
+|Pi2            |`make rpi2`           |[rpi2](../../buildroot-external/configs/rpi2_defconfig)|[raspberrypi](./raspberrypi/)|
+|Pi Zero        |`make rpi0_w`         |[rpi0_w](../../buildroot-external/configs/rpi0_w_defconfig)|[raspberrypi](./raspberrypi/)|
+|Pi             |`make rpi`            |[rpi](../../buildroot-external/configs/rpi_defconfig)|[raspberrypi](./raspberrypi/)|
+|Odroid-C2      |`make odroid_c2`      |[odroid_c2](../../buildroot-external/configs/odroid_c2_defconfig)|[hardkernel](./hardkernel/)|
+|Odroid-C4      |`make odroid_c4`      |[odroid_c4](../../buildroot-external/configs/odroid_c4_defconfig)|[hardkernel](./hardkernel/)|
+|Odroid-N2      |`make odroid_n2`      |[odroid_n2](../../buildroot-external/configs/odroid_n2_defconfig)|[hardkernel](./hardkernel/)|
+|Odroid-XU4     |`make odroid_xu4`     |[odroid_xu4](../../buildroot-external/configs/odroid_xu4_defconfig)|[hardkernel](./hardkernel/)|
+|Tinker Board   |`make tinker`         |[tinker](../../buildroot-external/configs/tinker_defconfig)|[asus](./asus/)|
+|Generic x86-64 |`make generic_x86_64` |[generic_x86_64](../../buildroot-external/configs/generic_x86_64_defconfig)|[generic-x86-64](./generic-x86-64/)|
+|OVA            |`make ova`            |[ova](../../buildroot-external/configs/ova_defconfig)|[ova](./ova/)|

Documentation/boards/generic-x86-64/README.md

@@ -0,0 +1,61 @@
+# Generic x86-64
+
+## Supported Hardware
+
+This board configuration aims to support most x86-64 systems with UEFI boot. The
+main aim is to support Intel NUC mini PCs and similar systems. Hardware it has
+been tested with is listed below.
+
+## Tested Hardware
+
+| Device                | Release Date | Support | Config      |
+|-----------------------|--------------|---------|-------------|
+| Intel NUC5CPYH        | Q3 2015      | yes     | [generic_x86_64](../../../buildroot-external/configs/generic_x86_64_defconfig) |
+| Intel NUC6CAYH        | Q4 2016      | yes     | [generic_x86_64](../../../buildroot-external/configs/generic_x86_64_defconfig) |
+| Intel NUC7i3DNHE	| Q3 2017      | yes     | [generic_x86_64](../../../buildroot-external/configs/generic_x86_64_defconfig) |
+| Intel NUC10i3FNK2     | Q4 2019      | yes     | [generic_x86_64](../../../buildroot-external/configs/generic_x86_64_defconfig) |
+| Gigabyte GB-BPCE-3455 | 2017         | yes*    | [generic_x86_64](../../../buildroot-external/configs/generic_x86_64_defconfig) |
+
+\* needs 'nomodeset' in cmdline.txt if you want a console
+
+
+## Requirements
+
+- x86-64 support
+- UEFI boot
+- SATA/AHCI or eMMC storage
+- Supported NIC:
+  - Intel Gigabit NIC (e1000, igb - via Linux mainline)
+  - Intel PCIe Gigabit NIC (e1000e - via out-of-tree module in *buildroot-external/package/intel-e1000e*)
+  - Realtek Gigabit NIC (r8169)
+  - Intel Wireless Wifi 802.11ac (iwlwifi, see below)
+
+## Wifi
+
+The following cards are supported:
+
+- Intel Wireless 3160
+- Intel Wireless 7260
+- Intel Wireless 7265
+- Intel Wireless-AC 3165
+- Intel Wireless-AC 3168
+- Intel Wireless-AC 8260
+- Intel Wireless-AC 8265
+- Intel Wireless-AC 9260
+- Intel Wireless-AC 9461
+- Intel Wireless-AC 9462
+- Intel Wireless-AC 9560
+
+## Bluetooth
+
+Bluetooth is untested.
+
+## Installation
+
+Make sure secure boot is disabled in the UEFI BIOS settings.
+
+Currently there is no shiny installation method. Checklist:
+- Boot PC to live environment using PXE or USB
+- Copy or download the Home Assistant OS image into your live environment
+- unxz the image and dd to the local hard disk
+- Reboot

Documentation/boards/hardkernel/README.md

@@ -10,3 +10,17 @@
 | ODROID-N2      | 2019          | yes          | [odroid_n2](../../../buildroot-external/configs/odroid_n2_defconfig) |
 
 See separate documentation for each board.
+
+## Connectivity devices
+
+### Wi-Fi
+
+The following devices have been tested on Home Assistant OS 5.8:
+
+- [Bluetooth Module 2](https://www.hardkernel.com/shop/bluetooth-module-2/)
+- [WiFi Module 3](https://www.hardkernel.com/shop/wifi-module-3/)
+
+The [WiFi Module 5A](https://www.hardkernel.com/shop/wifi-module-5a/) is not
+recommended as there is no upstream driver support available. The driver
+currently compatible with recent Linux kernel version seems to have issues
+connecting to 5GHz networks.

Documentation/boards/hardkernel/odroid-n2.md

@@ -12,3 +12,7 @@ eg. `console=ttyAML0,115200n8 console=tty0`
 ## GPIO
 
 Refer to [the odroid wiki](https://wiki.odroid.com/odroid-n2/hardware/expansion_connectors).
+At this point not all functionality is supported by the upstream kernel used
+by Home Assistant OS.
+
+The GPIO on pin 11 is used as a low active power button input.

Documentation/boards/intel/README.md

@@ -1,56 +0,0 @@
-# Intel NUC
-
-## Supported Hardware
-
-This board configuration supports the Intel NUC mini PCs and compatibles. It should work for most recent NUC computers and, because this is a UEFI based image, it should in fact work with for any x86-64 based computer with UEFI. Hardware it has been tested with is listed below.
-
-## Tested Hardware
-
-| Device                | Release Date | Support | Config      |
-|-----------------------|--------------|---------|-------------|
-| Intel NUC5CPYH        | Q3 2015      | yes     | [intel_nuc](../../../buildroot-external/configs/intel_nuc_defconfig) |
-| Intel NUC6CAYH        | Q4 2016      | yes     | [intel_nuc](../../../buildroot-external/configs/intel_nuc_defconfig) |
-| Intel NUC10i3FNK2     | Q4 2019      | yes     | [intel_nuc](../../../buildroot-external/configs/intel_nuc_defconfig) |
-| Gigabyte GB-BPCE-3455 | 2017         | yes*    | [intel_nuc](../../../buildroot-external/configs/intel_nuc_defconfig) |
-
-\* needs 'nomodeset' in cmdline.txt if you want a console
-
-
-## Requirements
-
-- x86-64 support
-- UEFI boot
-- SATA/AHCI storage
-- Supported NIC:
-  - Intel Gigabit NIC (e1000, igb - via Linux mainline)
-  - Intel PCIe Gigabit NIC (e1000e - via out-of-tree module in *buildroot-external/package/intel-e1000e*)
-  - Realtek Gigabit NIC (r8169)
-  - Intel Wireless Wifi 802.11ac (iwlwifi, see below)
-
-## Wifi
-
-The following cards are supported:
-
-- Intel Wireless 3160
-- Intel Wireless 7260
-- Intel Wireless 7265
-- Intel Wireless-AC 3165
-- Intel Wireless-AC 3168
-- Intel Wireless-AC 8260
-- Intel Wireless-AC 8265
-- Intel Wireless-AC 9260
-- Intel Wireless-AC 9461
-- Intel Wireless-AC 9462
-- Intel Wireless-AC 9560
-
-## Bluetooth
-
-Bluetooth is untested.
-
-## Installation
-
-Currently there is no shiny installation method. Checklist:
-- Boot PC to live-environment using PXE or USB
-- Copy or download the hassos image into your live environment
-- zcat the image to local harddisk
-- Reboot

Documentation/boards/raspberrypi/README.md

@@ -37,9 +37,11 @@ USB mass storage boot is available on Raspberry Pi 4 (64-bit only), 3B, 3B+, 3A+
 
 For Raspberry 3B, 3A+ and 2B v1.2, to enable USB boot, add `program_usb_boot_mode=1` into `config.txt`. Note that this **permanently** alters the one-time programmable memory of the device.
 
-For Raspberry 4, make sure to update the bootloader to a stable release
-supporting USB mass storage boot (see
-[bcm2711_bootloader_config.md](https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2711_bootloader_config.md#usbmassstorageboot). If no SD card is used add `sd_poll_once=on` to `dtparam` in `config.txt` (comma separated). This gets rid of `mmc0: timeout waiting for hardware interrupt` kernel errors.
+For Raspberry 4
+
+* Make sure to update the bootloader to a stable release supporting USB mass storage boot (see [bcm2711_bootloader_config.md](https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2711_bootloader_config.md#usbmassstorageboot)). 
+* If no SD card is used add `sd_poll_once=on` to `dtparam` in `config.txt` (comma separated). This gets rid of `mmc0: timeout waiting for hardware interrupt` kernel errors.
+* If install still fails, then your SSD likely needs quirks enabled to work correctly (see [Finding the VID and PID of your USB SSD](https://www.raspberrypi.org/forums/viewtopic.php?t=245931)). Once you find your adapter's ID, add the quirks parameter in `cmdline.txt`. 
 
 For more information see [RaspberryPi](https://www.raspberrypi.org/documentation/hardware/raspberrypi/bootmodes/msd.md).
 

Documentation/getting_started_development.md

@@ -32,7 +32,7 @@ $ sudo systemctl --no-pager status docker -n0
 Now, change your working directory to your home-assistant/operating-system repository checkout (please adapt path names as needed), make sure your intended changes to the source tree are applied (and committed, ideally :)), and execute the `enter.sh` helper script:
 
 ```bash
-$ cd ~/codebase/hassos/
+$ cd ~/codebase/operating-system/
 $ sudo scripts/enter.sh
 Sending build context to Docker daemon  30.48MB
 Step 1/6 : FROM ubuntu:18.04

Documentation/kernel.md

@@ -1,19 +1,19 @@
 
 # Kernel Version
 
-Default Kernel tree: 5.4
+Default Kernel tree: 5.10
 
 | Board | Version |
 |-------|---------|
-| Open Virtual Appliance | 5.4.82 |
-| Raspberry Pi | 5.4.79 |
-| Raspberry Pi 0-W | 5.4.79 |
-| Raspberry Pi 2 | 5.4.79 |
-| Raspberry Pi 3 | 5.4.79 |
-| Raspberry Pi 4 | 5.4.79 |
-| Tinker Board | 5.4.82 |
-| Odroid-C2 | 5.9.11 |
-| Odroid-C4 | 5.9.11 |
-| Odroid-N2 | 5.9.11 |
-| Odroid-XU4 | 5.9.11 |
-| Intel NUC | 5.4.82 |
+| Open Virtual Appliance | 5.10.45 |
+| Raspberry Pi | 5.10.17 |
+| Raspberry Pi 0-W | 5.10.17 |
+| Raspberry Pi 2 | 5.10.17 |
+| Raspberry Pi 3 | 5.10.17 |
+| Raspberry Pi 4 | 5.10.17 |
+| Tinker Board | 5.10.45 |
+| Odroid-C2 | 5.10.45 |
+| Odroid-C4 | 5.10.45 |
+| Odroid-N2 | 5.9.16 |
+| Odroid-XU4 | 5.10.45 |
+| Generic x86-64 | 5.10.45 |

Documentation/network.md

@@ -4,23 +4,49 @@ Home Assistant Operating System uses NetworkManager to control the host network.
 
 ## Configure network
 
-Only a manual configuration using NetworkManager connection files is supported. Without a configuration file, the device will use DHCP by default. These network connection files can be placed on a USB drive and imported to the host as described in [Configuration][configuration-usb].
+By default the device will be in DHCP state.
 
-## Configuration examples
+Basic network settings can be set through the Supervisor frontend in the System
+tab. Advanced configurations such as VLAN are also available through the
+`ha network` CLI command.
 
-You can read the [NetworkManager manual][nm-manual] or find many configuration examples across the internet. Keep in mind that the system is read-only. If you don't want the IP address to change on every boot, you should modify the UUID property to a generic [UUID4][uuid]. Inside the `\CONFIG\network\` directory on the USB drive or SD card, create a file called `my-network` and add the appropriate contents below:
+To restore the default configuration the `ha network` CLI command can be used as
+well:
+
+```
+ha network update default --ipv4-method auto
+```
+
+If more advanced network settings are required network connection files can be
+placed on a USB drive and imported to the host as described in
+[Configuration][configuration-usb].
+
+## Manual Network Configuration
+
+If the frontend or `ha network` CLI cannot meet your use case, it is still
+possible to configure the underlying NetworkManager manually.
+
+You can read the [NetworkManager manual][nm-manual] or find many configuration
+examples across the internet. Note that changes to `NetworkManager.conf` are
+not supported currently, only connection keyfiles are supported. Keep in mind
+that the system is read-only. If you don't want the IP address to change on
+every boot, you should modify the UUID property to a generic [UUID4][uuid].
+Inside the `\CONFIG\network\` directory on the USB drive or SD card, create a
+file called `my-network` and add the appropriate contents below:
 
 **NOTE: Please make sure to save this file with UNIX line endings (LF, and not Windows' default CRLF endings). You can do this using Notepad these days!**
 
 ### Default
 
-A preinstalled connection profile is provided by default:
+A preinstalled connection profile for wired network is active by default:
 
 ```ini
 [connection]
-id=my-network
+id=Home Assistant OS default
 uuid=f62bf7c2-e565-49ff-bbfc-a4cf791e6add
 type=802-3-ethernet
+llmnr=2
+mdns=2
 
 [ipv4]
 method=auto
@@ -37,6 +63,8 @@ method=auto
 id=my-network
 uuid=d55162b4-6152-4310-9312-8f4c54d86afa
 type=802-3-ethernet
+llmnr=2
+mdns=2
 
 [ipv4]
 method=auto
@@ -90,14 +118,16 @@ For `address`, the value before the semicolon is the IP address and subnet prefi
 
 ### Reset network
 
-If you want to reset the network configuration back to the default DHCP settings, use the following commands on the host:
+If you want to reset the network configuration back to the default connection
+profile using DHCP, use the following commands on the host console:
 
 ```bash
-# rm /etc/NetworkManager/system-connections/*
-# cp /usr/share/system-connections/* /etc/NetworkManager/system-connections/
-# nmcli con reload
+# rm -r /mnt/overlay/etc/NetworkManager/system-connections
+# reboot
 ```
 
+Home Assistant OS will recreate the default connection profile during boot.
+
 ### Powersave
 
 If you have trouble with powersave then apply the following changes:
@@ -110,7 +140,7 @@ powersave=0
 
 ## Using `nmcli` to set a static IPv4 address
 
-Log into the the HassOS base system via a console:
+Log into the the Home Assistant OS base system via a console:
 
 ```bash
 Welcome to Home Assistant
@@ -121,13 +151,13 @@ homeassistant login:
 
 From there you use the `nmcli` configuration tool.
 
-- `# nmcli con show` will list the "HassOS default" connection in use.
-- `# nmcli con show "HassOS default"` will list all the properties of the connection.
+- `# nmcli con show` will list the "Home Assistant OS default" connection in use.
+- `# nmcli con show "Home Assistant OS default"` will list all the properties of the connection.
 
-To start editing the configuration setting for "HassOS default":
+To start editing the configuration setting for "Home Assistant OS default":
 
 ```bash
-# nmcli con edit "HassOS default"
+# nmcli con edit "Home Assistant OS default"
 ```
 
 To add your static IP address (select 'yes' for manual method);
@@ -150,6 +180,6 @@ If you now view the default connection `cat /etc/NetworkManager/system-connectio
 
 Doing a `nmcli con reload` does not always work, so restart the virtual machine or the physical system.
 
-[nm-manual]: https://developer.gnome.org/NetworkManager/stable/NetworkManager.conf.html
+[nm-manual]: https://developer.gnome.org/NetworkManager/stable/manpages.html
 [configuration-usb]: configuration.md
 [uuid]: https://www.uuidgenerator.net/

Documentation/partition.md

@@ -34,7 +34,9 @@ A visual representation looks like this:
 
 Sometime the bootloader part can look different because there can be firmware or SPLs for boot the CPU on the SoC.
 
-## Data
+## Data disk
+
+![Data-Disk preview](./usb-disk.png)
 
 The data partition is the only partition with real I/O. It will be expanded automatically at boot to the full size of the disk.
 
@@ -58,6 +60,22 @@ $ datactl move /dev/sdx
 ```
 
 Enter "yes" to confirm the operation. This will prepare the disk, however, the
-actual move will be running on next reboot. Once complete, the external drive
+actual move will be running on next reboot. This will make the first boot significantly longer than usual; please be patient. Reboot with the following command:
+```sh
+$ ha host reboot
+```
+
+Once complete, the external drive
 will contain the data and will need to be plugged in to successfully boot Home
-Assistant OS.
+Assistant.
+
+## Check if the move was succesful.
+Within the Home Assistant interface you won't see if the move was succesful. To check this, go to your host console again (as described above) and enter:
+```sh
+$ systemctl status mnt-data.mount
+```
+If the data partition was moved to your USB drive you should see ```sh Active: active (mounted)  ``` in the output. Also, it will show, which drive got mounted as /mnt/data (```sh Where ``` and ```sh what ``` section of the output)
+
+
+## Check Power Supply Rating
+Using an USB attached SSD can draw quite some power. For instance on Raspberry Pi 3 the official Raspberry Pi power supply (PSU) only provides 2.5A which can be too tight. Use a power supply which can at least provide 3.5A. Alternatively use a powered USB hub. Connect the Hub to one of the USB slots of your Raspberry Pi, and connect the SSD to the Hub. The power supply that came with the Hub will power the attached device(s).

Makefile

@@ -1,7 +1,8 @@
-RELEASE_DIR = /build/release
+BUILDDIR:=$(shell pwd)
+RELEASE_DIR = $(BUILDDIR)/release
 
-BUILDROOT=/build/buildroot
-BUILDROOT_EXTERNAL=/build/buildroot-external
+BUILDROOT=$(BUILDDIR)/buildroot
+BUILDROOT_EXTERNAL=$(BUILDDIR)/buildroot-external
 DEFCONFIG_DIR = $(BUILDROOT_EXTERNAL)/configs
 VERSION_DATE := $(shell date --utc +'%Y%m%d')
 VERSION_DEV := "dev$(VERSION_DATE)"
@@ -32,7 +33,7 @@ $(TARGETS_CONFIG): %-config:
 $(TARGETS): %: $(RELEASE_DIR) %-config
 	@echo "build $@"
 	$(MAKE) -C $(BUILDROOT) BR2_EXTERNAL=$(BUILDROOT_EXTERNAL) VERSION_DEV=$(VERSION_DEV)
-	cp -f $(O)/images/hassos_* $(RELEASE_DIR)/
+	cp -f $(O)/images/haos_* $(RELEASE_DIR)/
 
 	# Do not clean when building for one target
 ifneq ($(words $(filter $(TARGETS),$(MAKECMDGOALS))), 1)

buildroot-external/Config.in

@@ -5,3 +5,9 @@ source "$BR2_EXTERNAL_HASSOS_PATH/package/hardkernel-boot/Config.in"
 source "$BR2_EXTERNAL_HASSOS_PATH/package/qemu-guest-agent/Config.in"
 source "$BR2_EXTERNAL_HASSOS_PATH/package/intel-e1000e/Config.in"
 source "$BR2_EXTERNAL_HASSOS_PATH/package/rpi-eeprom/Config.in"
+source "$BR2_EXTERNAL_HASSOS_PATH/package/rtl8812au/Config.in"
+source "$BR2_EXTERNAL_HASSOS_PATH/package/os-agent/Config.in"
+source "$BR2_EXTERNAL_HASSOS_PATH/package/udisks2/Config.in"
+source "$BR2_EXTERNAL_HASSOS_PATH/package/eq3_char_loop/Config.in"
+source "$BR2_EXTERNAL_HASSOS_PATH/package/generic_raw_uart/Config.in"
+source "$BR2_EXTERNAL_HASSOS_PATH/package/rpi-rf-mod/Config.in"

buildroot-external/board/asus/hassos-hook.sh

@@ -10,6 +10,10 @@ function hassos_pre_image() {
         "${BINARIES_DIR}/rk3288-tinker.dtb" \
         "${BINARIES_DIR}/rk3288-tinker-s.dtb"
 
+    mkdir -p "${BOOT_DATA}/overlays"
+    cp "${BINARIES_DIR}"/*.dtbo "${BOOT_DATA}/overlays/"
+    cp "${BOARD_DIR}/boot-env.txt" "${BOOT_DATA}/haos-config.txt"
+
     echo "console=tty1" > "${BOOT_DATA}/cmdline.txt"
 
     # SPL

buildroot-external/board/asus/tinker/boot-env.txt

@@ -0,0 +1,2 @@
+# Uncomment this to enable GPIO support for RPI-RF-MOD/HM-MOD-RPI-PCB
+#overlays=rpi-rf-mod

buildroot-external/board/asus/tinker/kernel.config

@@ -2109,7 +2109,7 @@ CONFIG_ATH10K_USB=m
 # CONFIG_ATH10K_TRACING is not set
 CONFIG_WCN36XX=m
 # CONFIG_WCN36XX_DEBUGFS is not set
-CONFIG_RTL8188EU=m
+# CONFIG_ATH11K is not set
 CONFIG_WLAN_VENDOR_ATMEL=y
 CONFIG_AT76C50X_USB=m
 CONFIG_WLAN_VENDOR_BROADCOM=y
@@ -2130,50 +2130,14 @@ CONFIG_HOSTAP=y
 CONFIG_HOSTAP_FIRMWARE=y
 CONFIG_HOSTAP_FIRMWARE_NVRAM=y
 # CONFIG_P54_COMMON is not set
-CONFIG_WLAN_VENDOR_MARVELL=y
-CONFIG_LIBERTAS=m
-CONFIG_LIBERTAS_USB=m
-CONFIG_LIBERTAS_SDIO=m
-CONFIG_LIBERTAS_SPI=m
-# CONFIG_LIBERTAS_DEBUG is not set
-# CONFIG_LIBERTAS_MESH is not set
-CONFIG_LIBERTAS_THINFIRM=y
-# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
-CONFIG_LIBERTAS_THINFIRM_USB=m
-CONFIG_MWIFIEX=y
-CONFIG_MWIFIEX_SDIO=y
-CONFIG_MWIFIEX_USB=m
-CONFIG_WLAN_VENDOR_MEDIATEK=y
-CONFIG_MT7601U=m
-CONFIG_MT76_CORE=m
-CONFIG_MT76_LEDS=y
-CONFIG_MT76_USB=m
-CONFIG_MT76x2_COMMON=m
-CONFIG_MT76x0U=m
-CONFIG_MT76x2U=m
-CONFIG_WLAN_VENDOR_RALINK=y
-CONFIG_RT2X00=y
-CONFIG_RT2500USB=y
-CONFIG_RT73USB=y
-CONFIG_RT2800USB=y
-CONFIG_RT2800USB_RT33XX=y
-CONFIG_RT2800USB_RT35XX=y
-CONFIG_RT2800USB_RT3573=y
-CONFIG_RT2800USB_RT53XX=y
-CONFIG_RT2800USB_RT55XX=y
-CONFIG_RT2800USB_UNKNOWN=y
-CONFIG_RT2800_LIB=y
-CONFIG_RT2X00_LIB_USB=y
-CONFIG_RT2X00_LIB=y
-CONFIG_RT2X00_LIB_FIRMWARE=y
-CONFIG_RT2X00_LIB_CRYPTO=y
-CONFIG_RT2X00_LIB_LEDS=y
-# CONFIG_RT2X00_LIB_DEBUGFS is not set
-# CONFIG_RT2X00_DEBUG is not set
+# CONFIG_WLAN_VENDOR_MARVELL is not set
+# CONFIG_WLAN_VENDOR_MEDIATEK is not set
+# CONFIG_WLAN_VENDOR_MICROCHIP is not set
+# CONFIG_WLAN_VENDOR_RALINK is not set
 CONFIG_WLAN_VENDOR_REALTEK=y
 CONFIG_RTL8187=m
 CONFIG_RTL8187_LEDS=y
-CONFIG_RTL_CARDS=m
+CONFIG_RTL_CARDS=y
 CONFIG_RTL8192CU=m
 CONFIG_RTLWIFI=m
 CONFIG_RTLWIFI_USB=m
@@ -2183,9 +2147,9 @@ CONFIG_RTL8XXXU=y
 # CONFIG_RTL8XXXU_UNTESTED is not set
 CONFIG_WLAN_VENDOR_RSI=y
 # CONFIG_RSI_91X is not set
-CONFIG_WLAN_VENDOR_ST=y
+# CONFIG_WLAN_VENDOR_ST is not set
 # CONFIG_CW1200 is not set
-CONFIG_WLAN_VENDOR_TI=y
+# CONFIG_WLAN_VENDOR_TI is not set
 # CONFIG_WL1251 is not set
 # CONFIG_WL12XX is not set
 # CONFIG_WL18XX is not set

buildroot-external/board/asus/tinker/patches/linux/0001-Revert-ARM-dts-rockchip-use-DMA-channels-for-UARTs-f.patch

@@ -0,0 +1,55 @@
+From 3f3c4cd047234fb94de4d6b701d05ff0450890cf Mon Sep 17 00:00:00 2001
+Message-Id: <3f3c4cd047234fb94de4d6b701d05ff0450890cf.1613588152.git.stefan@agner.ch>
+From: Stefan Agner <stefan@agner.ch>
+Date: Wed, 17 Feb 2021 19:55:41 +0100
+Subject: [PATCH] Revert "ARM: dts: rockchip: use DMA channels for UARTs for
+ RK3288"
+
+This reverts commit 3425fe335c29310f6628faf9a7947d07f32d8962.
+---
+ arch/arm/boot/dts/rk3288.dtsi | 8 --------
+ 1 file changed, 8 deletions(-)
+
+diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
+index 8fa80facc8cd..8636d95c45e1 100644
+--- a/arch/arm/boot/dts/rk3288.dtsi
++++ b/arch/arm/boot/dts/rk3288.dtsi
+@@ -422,8 +422,6 @@ uart0: serial@ff180000 {
+ 		reg-io-width = <4>;
+ 		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+ 		clock-names = "baudclk", "apb_pclk";
+-		dmas = <&dmac_peri 1>, <&dmac_peri 2>;
+-		dma-names = "tx", "rx";
+ 		pinctrl-names = "default";
+ 		pinctrl-0 = <&uart0_xfer>;
+ 		status = "disabled";
+@@ -437,8 +435,6 @@ uart1: serial@ff190000 {
+ 		reg-io-width = <4>;
+ 		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+ 		clock-names = "baudclk", "apb_pclk";
+-		dmas = <&dmac_peri 3>, <&dmac_peri 4>;
+-		dma-names = "tx", "rx";
+ 		pinctrl-names = "default";
+ 		pinctrl-0 = <&uart1_xfer>;
+ 		status = "disabled";
+@@ -465,8 +461,6 @@ uart3: serial@ff1b0000 {
+ 		reg-io-width = <4>;
+ 		clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
+ 		clock-names = "baudclk", "apb_pclk";
+-		dmas = <&dmac_peri 7>, <&dmac_peri 8>;
+-		dma-names = "tx", "rx";
+ 		pinctrl-names = "default";
+ 		pinctrl-0 = <&uart3_xfer>;
+ 		status = "disabled";
+@@ -480,8 +474,6 @@ uart4: serial@ff1c0000 {
+ 		reg-io-width = <4>;
+ 		clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
+ 		clock-names = "baudclk", "apb_pclk";
+-		dmas = <&dmac_peri 9>, <&dmac_peri 10>;
+-		dma-names = "tx", "rx";
+ 		pinctrl-names = "default";
+ 		pinctrl-0 = <&uart4_xfer>;
+ 		status = "disabled";
+-- 
+2.30.1
+

buildroot-external/board/asus/tinker/patches/linux/1010-ARM-DTSI-rk3288-Adding-missing-EDP-power-domain.patch

@@ -1,27 +0,0 @@
-From ac220d592aa38b9b717d36f7bb93f7be5a08f6b3 Mon Sep 17 00:00:00 2001
-From: Myy Miouyouyou <myy@miouyouyou.fr>
-Date: Thu, 19 Oct 2017 21:43:51 +0200
-Subject: [PATCH 14/28] ARM: DTSI: rk3288.dtsi: Adding missing EDP power domain
-
-Imported from Rockchip 4.4 kernel patches.
-
-Signed-off-by: Myy Miouyouyou <myy@miouyouyou.fr>
----
- arch/arm/boot/dts/rk3288.dtsi | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
-index 14ef8202..10ecebb4 100644
---- a/arch/arm/boot/dts/rk3288.dtsi
-+++ b/arch/arm/boot/dts/rk3288.dtsi
-@@ -1105,6 +1105,7 @@
- 		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
- 		clocks = <&cru SCLK_EDP>, <&cru PCLK_EDP_CTRL>;
- 		clock-names = "dp", "pclk";
-+		power-domains = <&power RK3288_PD_VIO>;
- 		phys = <&edp_phy>;
- 		phy-names = "dp";
- 		resets = <&cru SRST_EDP>;
--- 
-2.11.0
-

buildroot-external/board/asus/tinker/patches/linux/1011-ARM-DTSI-rk3288-Adding-missing-VOPB-registers.patch

@@ -1,28 +0,0 @@
-From c5af6798c9a411b3f550f463182a4b4904a21ec2 Mon Sep 17 00:00:00 2001
-From: Myy Miouyouyou <myy@miouyouyou.fr>
-Date: Thu, 19 Oct 2017 21:51:14 +0200
-Subject: [PATCH 16/28] ARM: DTSI: rk3288.dtsi: Adding missing VOPB registers
-
-Imported from @wzyy2 patches... I think...
-
-Signed-off-by: Myy Miouyouyou <myy@miouyouyou.fr>
----
- arch/arm/boot/dts/rk3288.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
-index 455446f6..125f8835 100644
---- a/arch/arm/boot/dts/rk3288.dtsi
-+++ b/arch/arm/boot/dts/rk3288.dtsi
-@@ -987,7 +987,7 @@
- 
- 	vopb: vop@ff930000 {
- 		compatible = "rockchip,rk3288-vop";
--		reg = <0x0 0xff930000 0x0 0x19c>;
-+		reg = <0x0 0xff930000 0x0 0x19c>, <0x0 0xff931000 0x0 0x1000>;
- 		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
- 		clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>;
- 		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
--- 
-2.11.0
-

buildroot-external/board/asus/tinker/patches/linux/1012-ARM-DTSI-rk3288-Fixed-the-SPDIF-node-address.patch

@@ -1,31 +0,0 @@
-From a0602b2724893de7ac9b4190a7a6bb66458da2d5 Mon Sep 17 00:00:00 2001
-From: Myy Miouyouyou <myy@miouyouyou.fr>
-Date: Thu, 19 Oct 2017 21:54:37 +0200
-Subject: [PATCH 17/28] ARM: DTSI: rk3288.dtsi: Fixed the SPDIF node address
-
-Now, the typo is only in the name of the node itself, not in the
-actual registers addresses definition.
-
-Still, this ought to be fixed one day !
-
-Signed-off-by: Myy Miouyouyou <myy@miouyouyou.fr>
----
- arch/arm/boot/dts/rk3288.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
-index 125f8835..e5d3d3c9 100644
---- a/arch/arm/boot/dts/rk3288.dtsi
-+++ b/arch/arm/boot/dts/rk3288.dtsi
-@@ -922,7 +922,7 @@
- 		status = "disabled";
- 	};
- 
--	spdif: sound@ff88b0000 {
-+	spdif: sound@ff8b0000 {
- 		compatible = "rockchip,rk3288-spdif", "rockchip,rk3066-spdif";
- 		reg = <0x0 0xff8b0000 0x0 0x10000>;
- 		#sound-dai-cells = <0>;
--- 
-2.11.0
-

buildroot-external/board/asus/tinker/patches/linux/1013-ARM-DTS-rk3288-tinker-Enabling-SDIO-and-Wifi.patch

@@ -0,0 +1,98 @@
+From d5d5c53173c484a13cda62a537cbf75a5df4b0e4 Mon Sep 17 00:00:00 2001
+From: "Miouyouyou (Myy)" <myy@miouyouyou.fr>
+Date: Mon, 5 Nov 2018 21:58:56 +0100
+Subject: [PATCH] ARM: DTS: rk3288-tinker: Enabling SDIO and Wifi
+
+Adding the appropriate nodes in order to exploit the WiFi capabilities
+of the board.
+Since these capabilities are provided through SDIO, and the SDIO
+nodes were not defined, these were added too.
+
+These seems to depend on each other so they are added in one big
+patch.
+
+Split if necessary.
+
+Signed-off-by: Miouyouyou (Myy) <myy@miouyouyou.fr>
+---
+ arch/arm/boot/dts/rk3288-tinker.dts | 62 +++++++++++++++++++++++++++++++++++++
+ 1 file changed, 62 insertions(+)
+
+diff --git a/arch/arm/boot/dts/rk3288-tinker.dts b/arch/arm/boot/dts/rk3288-tinker.dts
+index 1e43527aa..d4df13bed 100644
+--- a/arch/arm/boot/dts/rk3288-tinker.dts
++++ b/arch/arm/boot/dts/rk3288-tinker.dts
+@@ -6,8 +6,70 @@
+ /dts-v1/;
+ 
+ #include "rk3288-tinker.dtsi"
++#include <dt-bindings/clock/rockchip,rk808.h>
+ 
+ / {
+ 	model = "Rockchip RK3288 Asus Tinker Board";
+ 	compatible = "asus,rk3288-tinker", "rockchip,rk3288";
++
++	/* This is essential to get SDIO devices working.
++	   The Wifi depends on SDIO ! */
++	sdio_pwrseq: sdio-pwrseq {
++		compatible = "mmc-pwrseq-simple";
++		clocks = <&rk808 RK808_CLKOUT1>;
++		clock-names = "ext_clock";
++		pinctrl-names = "default";
++		pinctrl-0 = <&chip_enable_h>, <&wifi_enable_h>;
++
++		/*
++		 * On the module itself this is one of these (depending
++		 * on the actual card populated):
++		 * - SDIO_RESET_L_WL_REG_ON
++		 * - PDN (power down when low)
++		 */
++		reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>, <&gpio4 27 GPIO_ACTIVE_LOW>;
++	};
++
++	wireless-wlan {
++		compatible = "wlan-platdata";
++		rockchip,grf = <&grf>;
++		sdio_vref = <1800>;
++		status = "okay";
++		wifi_chip_type = "8723bs";
++		WIFI,host_wake_irq = <&gpio4 30 GPIO_ACTIVE_HIGH>;
++	};
++};
++
++&io_domains {
++	wifi-supply = <&vcc_18>;
++};
++
++&pinctrl {
++	sdio-pwrseq {
++		wifi_enable_h: wifienable-h {
++			rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++
++		chip_enable_h: chip-enable-h {
++			rockchip,pins = <4 27 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++	};
++};
++
++&sdio0 {
++	bus-width = <4>;
++	cap-sd-highspeed;
++	cap-sdio-irq;
++	clock-frequency = <50000000>;
++	clock-freq-min-max = <200000 50000000>;
++	disable-wp;
++	keep-power-in-suspend;
++	mmc-pwrseq = <&sdio_pwrseq>;
++	non-removable;
++	num-slots = <1>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
++	sd-uhs-sdr104;
++	status = "okay";
++	supports-sdio;
+ };
+-- 
+2.16.4
+

buildroot-external/board/asus/tinker/patches/linux/1015-ARM-DTSI-rk3288-tinker-Improving-the-CPU-max-voltage.patch

@@ -18,7 +18,7 @@ index aa107ee41..3da1c830f 100644
  				regulator-always-on;
  				regulator-boot-on;
  				regulator-min-microvolt = <750000>;
--				regulator-max-microvolt = <1350000>;
+-				regulator-max-microvolt = <1400000>;
 +				regulator-max-microvolt = <1450000>;
  				regulator-name = "vdd_arm";
  				regulator-ramp-delay = <6000>;

buildroot-external/board/asus/tinker/patches/linux/1016-ARM-DTSI-rk3288-tinker-Setting-up-the-SD-regulators.patch

@@ -1,31 +0,0 @@
-From 3dacea70a8e434008f5b1f119a7f7da9aebc772c Mon Sep 17 00:00:00 2001
-From: "Miouyouyou (Myy)" <myy@miouyouyou.fr>
-Date: Mon, 5 Nov 2018 20:18:58 +0100
-Subject: [PATCH] ARM: DTSI: rk3288-tinker: Setting up the SD regulators
-
-Some are needed and some are not. Playing with these parameters is
-required to get reboot working on these boards.
-
-I still can't believe that these boards can't soft reset correctly.
-
-Signed-off-by: Miouyouyou (Myy) <myy@miouyouyou.fr>
----
- arch/arm/boot/dts/rk3288-tinker.dtsi | 2 ++
- 1 file changed, 2 insertions(+)
-
-diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
-index 3da1c830f..dd1090728 100644
---- a/arch/arm/boot/dts/rk3288-tinker.dtsi
-+++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
-@@ -254,7 +254,8 @@
- 			};
- 
- 			vccio_sd: LDO_REG5 {
-+				regulator-always-on;
- 				regulator-boot-on;
- 				regulator-min-microvolt = <1800000>;
- 				regulator-max-microvolt = <3300000>;
- 				regulator-name = "vccio_sd";
--- 
-2.16.4
-

buildroot-external/board/asus/tinker/patches/linux/1019-ARM-DTSI-rk3288-tinker-Defining-SDMMC-properties.patch

@@ -1,33 +0,0 @@
-From 487db7cefc9861fdaf30579c378a98f0360690ae Mon Sep 17 00:00:00 2001
-From: "Miouyouyou (Myy)" <myy@miouyouyou.fr>
-Date: Mon, 5 Nov 2018 20:27:14 +0100
-Subject: [PATCH] ARM: DTSI: rk3288-tinker: Defining SDMMC properties
-
-I never knew if these properties were required to fix the dreaded
-reboot issue...
-
-Signed-off-by: Miouyouyou (Myy) <myy@miouyouyou.fr>
----
- arch/arm/boot/dts/rk3288-tinker.dtsi | 5 +++++
- 1 file changed, 5 insertions(+)
-
-diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
-index dd1090728..8edd6f681 100644
---- a/arch/arm/boot/dts/rk3288-tinker.dtsi
-+++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
-@@ -436,7 +436,12 @@
- 	disable-wp;			/* wp not hooked up */
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
-+	sd-uhs-sdr12;
-+	sd-uhs-sdr25;
-+	sd-uhs-sdr50;
-+	sd-uhs-sdr104;
- 	status = "okay";
-+	supports-sd;
- 	vmmc-supply = <&vcc33_sd>;
- 	vqmmc-supply = <&vccio_sd>;
- };
--- 
-2.16.4
-

buildroot-external/board/asus/tinker/patches/linux/1020-ARM-DTSI-rk3288-Set-the-VPU-MMU-power-domains.patch

@@ -1,48 +0,0 @@
-From d3d3fe433d9038dcd1a98f4d6711c0777ed06703 Mon Sep 17 00:00:00 2001
-From: "Miouyouyou (Myy)" <myy@miouyouyou.fr>
-Date: Mon, 25 Jun 2018 17:08:32 +0200
-Subject: [PATCH 26/26] ARM: DTSI: rk3288: Set the VPU MMU power domains
-
-Without that, the auto-activation of the VPU hardware IOMMU fails
-when enabling the hardware, before the "probe" phase of its device
-driver.
-
-Basically, when loading a "of_platform" device driver targeting
-the VPU devices, you'll get these errors without this patch :
-
-[12753.996950] rk_iommu ff9c0440.iommu: Error during raw reset. MMU_DTE_ADDR is not functioning
-[12754.007483] rk_iommu ff9c0440.iommu: Disable stall request timed out, status: 0xffffffff
-[12754.026652] rk_iommu ff9c0440.iommu: Disable paging request timed out, status: 0xffffffff
-[12754.045975] rk_iommu ff9c0440.iommu: Disable stall request timed out, status: 0xffffffff
-
-When using this patch, the errors disappear.
-
-This seems to be due to the IOMMU device sharing the same power domain
-than the device.
-When loading an "of_platform" driver, the kernel logic seems to try
-enabling the associated IOMMU device before letting the driver handles
-anything with the actual VPU hardware.
-It appears that setting the power domain of the VPU IOMMU nodes let the
-IOMMU driver enable the IOMMU shared power domain, and make the IOMMU
-device useable.
-
-Signed-off-by: Miouyouyou (Myy) <myy@miouyouyou.fr>
----
- arch/arm/boot/dts/rk3288.dtsi | 2 ++
- 1 file changed, 2 insertions(+)
-
-diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
-index 45ec4e89..46e1b8e2 100644
---- a/arch/arm/boot/dts/rk3288.dtsi
-+++ b/arch/arm/boot/dts/rk3288.dtsi
-@@ -1262,6 +1263,7 @@
- 		interrupt-names = "hevc_mmu";
- 		clocks = <&cru ACLK_HEVC>, <&cru HCLK_HEVC>;
- 		clock-names = "aclk", "iface";
-+		power-domains = <&power RK3288_PD_HEVC>;
- 		#iommu-cells = <0>;
- 		status = "disabled";
- 	};
--- 
-2.16.4
-

buildroot-external/board/asus/tinker/patches/linux/1023-dts-rk3288-support-for-dedicating-npll-to-a-vop.patch

@@ -1,46 +0,0 @@
-From 4ab4f88649468dada5d609e1a6f8a71a7d5610c9 Mon Sep 17 00:00:00 2001
-From: "Miouyouyou (Myy)" <myy@miouyouyou.fr>
-Date: Sat, 29 Sep 2018 02:48:59 +0200
-Subject: [PATCH 4/6] dts: rk3288: support for dedicating npll to a vop
-
-This patch is taken from Urja Rannikko ( @urjaman ) patchset here :
-https://github.com/urjaman/arch-c201/blob/master/linux-c201/0020-RK3288-HDMI-clock-hacks-combined.patch
-https://www.spinics.net/lists/arm-kernel/msg673156.html
-
-The original description was :
-
-    Add the VOP DCLKs to the assigned clocks list so their
-    parents can be set in the dts include files for
-    devices that do dedicate npll to a vop.
-
-https://www.spinics.net/lists/arm-kernel/msg673162.html
-
-Signed-off-by: Miouyouyou (Myy) <myy@miouyouyou.fr>
----
- arch/arm/boot/dts/rk3288.dtsi | 6 ++++--
- 1 file changed, 4 insertions(+), 2 deletions(-)
-
-diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
-index d23c7fa55..ff04aab5e 100644
---- a/arch/arm/boot/dts/rk3288.dtsi
-+++ b/arch/arm/boot/dts/rk3288.dtsi
-@@ -867,12 +867,14 @@
- 		rockchip,grf = <&grf>;
- 		#clock-cells = <1>;
- 		#reset-cells = <1>;
--		assigned-clocks = <&cru PLL_GPLL>, <&cru PLL_CPLL>,
-+		assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>,
-+				  <&cru PLL_GPLL>, <&cru PLL_CPLL>,
- 				  <&cru PLL_NPLL>, <&cru ACLK_CPU>,
- 				  <&cru HCLK_CPU>, <&cru PCLK_CPU>,
- 				  <&cru ACLK_PERI>, <&cru HCLK_PERI>,
- 				  <&cru PCLK_PERI>;
--		assigned-clock-rates = <594000000>, <400000000>,
-+		assigned-clock-rates = <0>, <0>,
-+				       <594000000>, <400000000>,
- 				       <500000000>, <300000000>,
- 				       <150000000>, <75000000>,
- 				       <300000000>, <150000000>,
--- 
-2.16.4
-

buildroot-external/board/asus/tinker/patches/linux/2002-clk-rockchip-add-all-known-operating-points-to-the-a.patch

@@ -1,50 +0,0 @@
-From e0c5a419cf5464cd02996431afa98e3b22dc6801 Mon Sep 17 00:00:00 2001
-From: Myy <myy@miouyouyou.fr>
-Date: Mon, 17 Jul 2017 23:14:48 +0000
-Subject: [PATCH] clk: rockchip: add all known operating points to the allowed
- CPU freqs
-
-Patch from Willy Tarreau
-
-Original commit message :
-At least 1920 MHz runs stable on the MiQi even on openssl speed -multi 4,
-which is by far the most intensive workload, and 1992/2016 work fine on
-the CS-008 until it starts to heat too much. So add all of them so that
-the device tree can simply manipulate them.
-
-Signed-off-by: Myy <myy@miouyouyou.fr>
----
- drivers/clk/rockchip/clk-rk3288.c | 17 +++++++++++++++++
- 1 file changed, 17 insertions(+)
-
-diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c
-index 753c649..fd2058f 100644
---- a/drivers/clk/rockchip/clk-rk3288.c
-+++ b/drivers/clk/rockchip/clk-rk3288.c
-@@ -145,6 +145,23 @@ static struct rockchip_pll_rate_table rk3288_pll_rates[] = {
- 	}
- 
- static struct rockchip_cpuclk_rate_table rk3288_cpuclk_rates[] __initdata = {
-+	RK3288_CPUCLK_RATE(2208000000U, 1, 3, 1, 3, 3),
-+	RK3288_CPUCLK_RATE(2184000000U, 1, 3, 1, 3, 3),
-+	RK3288_CPUCLK_RATE(2160000000U, 1, 3, 1, 3, 3),
-+	RK3288_CPUCLK_RATE(2136000000, 1, 3, 1, 3, 3),
-+	RK3288_CPUCLK_RATE(2112000000, 1, 3, 1, 3, 3),
-+	RK3288_CPUCLK_RATE(2088000000, 1, 3, 1, 3, 3),
-+	RK3288_CPUCLK_RATE(2064000000, 1, 3, 1, 3, 3),
-+	RK3288_CPUCLK_RATE(2040000000, 1, 3, 1, 3, 3),
-+	RK3288_CPUCLK_RATE(2016000000, 1, 3, 1, 3, 3),
-+	RK3288_CPUCLK_RATE(1992000000, 1, 3, 1, 3, 3),
-+	RK3288_CPUCLK_RATE(1968000000, 1, 3, 1, 3, 3),
-+	RK3288_CPUCLK_RATE(1944000000, 1, 3, 1, 3, 3),
-+	RK3288_CPUCLK_RATE(1920000000, 1, 3, 1, 3, 3),
-+	RK3288_CPUCLK_RATE(1896000000, 1, 3, 1, 3, 3),
-+	RK3288_CPUCLK_RATE(1872000000, 1, 3, 1, 3, 3),
-+	RK3288_CPUCLK_RATE(1848000000, 1, 3, 1, 3, 3),
-+	RK3288_CPUCLK_RATE(1824000000, 1, 3, 1, 3, 3),
- 	RK3288_CPUCLK_RATE(1800000000, 1, 3, 1, 3, 3),
- 	RK3288_CPUCLK_RATE(1704000000, 1, 3, 1, 3, 3),
- 	RK3288_CPUCLK_RATE(1608000000, 1, 3, 1, 3, 3),
--- 
-2.10.2
-

buildroot-external/board/asus/tinker/patches/linux/2006-soc-rockchip-power-domain-export-idle-request.patch

@@ -1,74 +0,0 @@
-From e7b60b10cf3fd2f4374ab26c314383121c27fe82 Mon Sep 17 00:00:00 2001
-From: "Miouyouyou (Myy)" <myy@miouyouyou.fr>
-Date: Tue, 22 Jan 2019 21:24:37 +0100
-Subject: [PATCH] soc: rockchip: power-domain: export idle request for RKMPP
-
-This function, and the added header, are required by the RKMPP driver,
-provided by Randy Li. However, I can't attest that the provided code
-is correct.
-
-Signed-off-by: Miouyouyou (Myy) <myy@miouyouyou.fr>
----
- drivers/soc/rockchip/pm_domains.c | 23 +++++++++++++++++++++++
- include/soc/rockchip/pm_domains.h | 15 +++++++++++++++
- 2 files changed, 38 insertions(+)
- create mode 100644 include/soc/rockchip/pm_domains.h
-
-diff --git a/drivers/soc/rockchip/pm_domains.c b/drivers/soc/rockchip/pm_domains.c
-index 847c7c482..3e2e252cb 100644
---- a/drivers/soc/rockchip/pm_domains.c
-+++ b/drivers/soc/rockchip/pm_domains.c
-@@ -199,6 +199,29 @@ static int rockchip_pmu_set_idle_request(struct rockchip_pm_domain *pd,
- 	return 0;
- }
- 
-+int rockchip_pmu_idle_request(struct device *dev, bool idle)
-+{
-+	struct generic_pm_domain *genpd;
-+	struct rockchip_pm_domain *pd;
-+	int ret;
-+
-+	if (IS_ERR_OR_NULL(dev))
-+		return -EINVAL;
-+
-+	if (IS_ERR_OR_NULL(dev->pm_domain))
-+		return -EINVAL;
-+
-+	genpd = pd_to_genpd(dev->pm_domain);
-+	pd = to_rockchip_pd(genpd);
-+
-+	mutex_lock(&pd->pmu->mutex);
-+	ret = rockchip_pmu_set_idle_request(pd, idle);
-+	mutex_unlock(&pd->pmu->mutex);
-+
-+	return ret;
-+}
-+EXPORT_SYMBOL(rockchip_pmu_idle_request);
-+
- static int rockchip_pmu_save_qos(struct rockchip_pm_domain *pd)
- {
- 	int i;
-diff --git a/include/soc/rockchip/pm_domains.h b/include/soc/rockchip/pm_domains.h
-new file mode 100644
-index 000000000..720b3314e
---- /dev/null
-+++ b/include/soc/rockchip/pm_domains.h
-@@ -0,0 +1,15 @@
-+/*
-+ * pm_domain.h - Definitions and headers related to device power domains.
-+ *
-+ * Copyright (C) 2017 Randy Li <ayaka@soulik.info>.
-+ *
-+ * This file is released under the GPLv2.
-+ */
-+
-+#ifndef _LINUX_ROCKCHIP_PM_H
-+#define _LINUX_ROCKCHIP_PM_H
-+#include <linux/device.h>
-+
-+int rockchip_pmu_idle_request(struct device *dev, bool idle);
-+
-+#endif /* _LINUX_ROCKCHIP_PM_H */
--- 
-2.16.4
-

buildroot-external/board/asus/tinker/patches/linux/2007-drivers-wifi-ath9k-reverse-do-not-use-bulk-on-EP3-and-EP4.patch

@@ -1,101 +0,0 @@
-FROM: Solidhal <hal@halemmerich.com>
-
-This patch reverses commit 2b721118b7821107757eb1d37af4b60e877b27e7, as can bee seen here:
-https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=2b721118b7821107757eb1d37af4b60e877b27e7
-
-This commit caused issues on veyron speedy with ath9k and dwc2 drivers. Any ath9k device (ar9271) 
-would intermittently work, most of the time ending in errors as can bee seen here:
-https://github.com/SolidHal/PrawnOS/issues/38
-This commit fixes that issue.
-This is only a temporary work around while a permenant fix is found, as this commit seems to only cause issues
-with dwc2
-
-diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
---- b/drivers/net/wireless/ath/ath9k/hif_usb.c
-+++ a/drivers/net/wireless/ath/ath9k/hif_usb.c
-@@ -115,10 +115,10 @@
- 	cmd->skb = skb;
- 	cmd->hif_dev = hif_dev;
- 
-+	usb_fill_bulk_urb(urb, hif_dev->udev,
-+			 usb_sndbulkpipe(hif_dev->udev, USB_REG_OUT_PIPE),
--	usb_fill_int_urb(urb, hif_dev->udev,
--			 usb_sndintpipe(hif_dev->udev, USB_REG_OUT_PIPE),
- 			 skb->data, skb->len,
-+			 hif_usb_regout_cb, cmd);
--			 hif_usb_regout_cb, cmd, 1);
- 
- 	usb_anchor_urb(urb, &hif_dev->regout_submitted);
- 	ret = usb_submit_urb(urb, GFP_KERNEL);
-@@ -735,11 +735,11 @@
- 
- 		rx_buf->skb = nskb;
- 
-+		usb_fill_bulk_urb(urb, hif_dev->udev,
-+				 usb_rcvbulkpipe(hif_dev->udev,
--		usb_fill_int_urb(urb, hif_dev->udev,
--				 usb_rcvintpipe(hif_dev->udev,
- 						 USB_REG_IN_PIPE),
- 				 nskb->data, MAX_REG_IN_BUF_SIZE,
-+				 ath9k_hif_usb_reg_in_cb, nskb);
--				 ath9k_hif_usb_reg_in_cb, rx_buf, 1);
- 	}
- 
- resubmit:
-@@ -909,11 +909,11 @@
- 		rx_buf->hif_dev = hif_dev;
- 		rx_buf->skb = skb;
- 
-+		usb_fill_bulk_urb(urb, hif_dev->udev,
-+				  usb_rcvbulkpipe(hif_dev->udev,
--		usb_fill_int_urb(urb, hif_dev->udev,
--				  usb_rcvintpipe(hif_dev->udev,
- 						  USB_REG_IN_PIPE),
- 				  skb->data, MAX_REG_IN_BUF_SIZE,
-+				  ath9k_hif_usb_reg_in_cb, skb);
--				  ath9k_hif_usb_reg_in_cb, rx_buf, 1);
- 
- 		/* Anchor URB */
- 		usb_anchor_urb(urb, &hif_dev->reg_in_submitted);
-@@ -1031,7 +1031,9 @@
- 
- static int ath9k_hif_usb_dev_init(struct hif_device_usb *hif_dev)
- {
-+	struct usb_host_interface *alt = &hif_dev->interface->altsetting[0];
-+	struct usb_endpoint_descriptor *endp;
-+	int ret, idx;
--	int ret;
- 
- 	ret = ath9k_hif_usb_download_fw(hif_dev);
- 	if (ret) {
-@@ -1041,6 +1043,20 @@
- 		return ret;
- 	}
- 
-+	/* On downloading the firmware to the target, the USB descriptor of EP4
-+	 * is 'patched' to change the type of the endpoint to Bulk. This will
-+	 * bring down CPU usage during the scan period.
-+	 */
-+	for (idx = 0; idx < alt->desc.bNumEndpoints; idx++) {
-+		endp = &alt->endpoint[idx].desc;
-+		if ((endp->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
-+				== USB_ENDPOINT_XFER_INT) {
-+			endp->bmAttributes &= ~USB_ENDPOINT_XFERTYPE_MASK;
-+			endp->bmAttributes |= USB_ENDPOINT_XFER_BULK;
-+			endp->bInterval = 0;
-+		}
-+	}
-+
- 	/* Alloc URBs */
- 	ret = ath9k_hif_usb_alloc_urbs(hif_dev);
- 	if (ret) {
-@@ -1252,7 +1268,7 @@
- 	if (!buf)
- 		return;
- 
-+	ret = usb_bulk_msg(udev, usb_sndbulkpipe(udev, USB_REG_OUT_PIPE),
--	ret = usb_interrupt_msg(udev, usb_sndintpipe(udev, USB_REG_OUT_PIPE),
- 			   buf, 4, NULL, USB_MSG_TIMEOUT);
- 	if (ret)
- 		dev_err(&udev->dev, "ath9k_htc: USB reboot failed\n");
-

buildroot-external/board/asus/tinker/patches/linux/2008-clk-rockchip-rk3288-Support-for-dedicating-NPLL-to-a.patch

@@ -1,178 +0,0 @@
-From e03d074b8ec00718337e7373e991912f6b6f9a52 Mon Sep 17 00:00:00 2001
-From: "Miouyouyou (Myy)" <myy@miouyouyou.fr>
-Date: Mon, 5 Nov 2018 19:53:43 +0100
-Subject: [PATCH] clk: rockchip: rk3288: Support for dedicating NPLL to a VOP
-
-This patch is taken from Urja Rannikko ( @urjaman ) patchset here :
-https://github.com/urjaman/arch-c201/blob/master/linux-c201/0020-RK3288-HDMI-clock-hacks-combined.patch
-https://www.spinics.net/lists/arm-kernel/msg673156.html
-
-I'm not really sure what this does exactly. It basically sets the
-parent clock of the newly added clocks, if the newly added property
-"rockchip,npll-for-vop" is detected and set.
-
-I have no clear idea how HDMI Neuronal PLL (and PLL in general) work,
-so I cannot comment on what it's doing and if it's a good idea in
-general.
-
-Now, I still have to test if that patch does anything useful on
-RK3288 boards. If it doesn't, I might just throw it away on next
-versions.
-
-Signed-off-by: Miouyouyou (Myy) <myy@miouyouyou.fr>
----
- drivers/clk/rockchip/clk-rk3288.c | 68 ++++++++++++++++++++++++++++++++-------
- drivers/clk/rockchip/clk.h        |  3 ++
- 2 files changed, 59 insertions(+), 12 deletions(-)
-
-diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c
-index 13b38cb89..0d8b99b6b 100644
---- a/drivers/clk/rockchip/clk-rk3288.c
-+++ b/drivers/clk/rockchip/clk-rk3288.c
-@@ -215,10 +215,13 @@ PNAME(mux_ddrphy_p)		= { "dpll_ddr", "gpll_ddr" };
- PNAME(mux_aclk_cpu_src_p)	= { "cpll_aclk_cpu", "gpll_aclk_cpu" };
- 
- PNAME(mux_pll_src_cpll_gpll_p)		= { "cpll", "gpll" };
--PNAME(mux_pll_src_npll_cpll_gpll_p)	= { "npll", "cpll", "gpll" };
--PNAME(mux_pll_src_cpll_gpll_npll_p)	= { "cpll", "gpll", "npll" };
-+PNAME_ED(mux_pll_src_npll_cpll_gpll_p)	= { "npll", "cpll", "gpll" };
-+
-+PNAME_ED(mux_pll_src_cgn_pll_nonvop_p)	= { "cpll", "gpll", "npll" };
-+PNAME_ED(mux_pll_src_cgn_pll_vop0_p) = { "cpll", "gpll", "npll" };
-+PNAME_ED(mux_pll_src_cgn_pll_vop1_p) = { "cpll", "gpll", "npll" };
- PNAME(mux_pll_src_cpll_gpll_usb480m_p)	= { "cpll", "gpll", "unstable:usbphy480m_src" };
--PNAME(mux_pll_src_cpll_gll_usb_npll_p)	= { "cpll", "gpll", "unstable:usbphy480m_src", "npll" };
-+PNAME_ED(mux_pll_src_cpll_gll_usb_npll_p) = { "cpll", "gpll", "usbphy480m_src", "npll" };
- 
- PNAME(mux_mmc_src_p)	= { "cpll", "gpll", "xin24m", "xin24m" };
- PNAME(mux_i2s_pre_p)	= { "i2s_src", "i2s_frac", "ext_i2s", "xin12m" };
-@@ -464,24 +467,24 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
- 			RK3288_CLKSEL_CON(30), 14, 2, MFLAGS, 8, 5, DFLAGS,
- 			RK3288_CLKGATE_CON(3), 4, GFLAGS),
- 
--	COMPOSITE(DCLK_VOP0, "dclk_vop0", mux_pll_src_cpll_gpll_npll_p, 0,
-+	COMPOSITE(DCLK_VOP0, "dclk_vop0", mux_pll_src_cgn_pll_vop0_p, 0,
- 			RK3288_CLKSEL_CON(27), 0, 2, MFLAGS, 8, 8, DFLAGS,
- 			RK3288_CLKGATE_CON(3), 1, GFLAGS),
--	COMPOSITE(DCLK_VOP1, "dclk_vop1", mux_pll_src_cpll_gpll_npll_p, 0,
-+	COMPOSITE(DCLK_VOP1, "dclk_vop1", mux_pll_src_cgn_pll_vop1_p, 0,
- 			RK3288_CLKSEL_CON(29), 6, 2, MFLAGS, 8, 8, DFLAGS,
- 			RK3288_CLKGATE_CON(3), 3, GFLAGS),
- 
- 	COMPOSITE_NODIV(SCLK_EDP_24M, "sclk_edp_24m", mux_edp_24m_p, 0,
- 			RK3288_CLKSEL_CON(28), 15, 1, MFLAGS,
- 			RK3288_CLKGATE_CON(3), 12, GFLAGS),
--	COMPOSITE(SCLK_EDP, "sclk_edp", mux_pll_src_cpll_gpll_npll_p, 0,
-+	COMPOSITE(SCLK_EDP, "sclk_edp", mux_pll_src_cgn_pll_nonvop_p, 0,
- 			RK3288_CLKSEL_CON(28), 6, 2, MFLAGS, 0, 6, DFLAGS,
- 			RK3288_CLKGATE_CON(3), 13, GFLAGS),
- 
--	COMPOSITE(SCLK_ISP, "sclk_isp", mux_pll_src_cpll_gpll_npll_p, 0,
-+	COMPOSITE(SCLK_ISP, "sclk_isp", mux_pll_src_cgn_pll_nonvop_p, 0,
- 			RK3288_CLKSEL_CON(6), 6, 2, MFLAGS, 0, 6, DFLAGS,
- 			RK3288_CLKGATE_CON(3), 14, GFLAGS),
--	COMPOSITE(SCLK_ISP_JPE, "sclk_isp_jpe", mux_pll_src_cpll_gpll_npll_p, 0,
-+	COMPOSITE(SCLK_ISP_JPE, "sclk_isp_jpe", mux_pll_src_cgn_pll_nonvop_p, 0,
- 			RK3288_CLKSEL_CON(6), 14, 2, MFLAGS, 8, 6, DFLAGS,
- 			RK3288_CLKGATE_CON(3), 15, GFLAGS),
- 
-@@ -490,16 +493,16 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
- 	GATE(SCLK_HDMI_CEC, "sclk_hdmi_cec", "xin32k", 0,
- 			RK3288_CLKGATE_CON(5), 11, GFLAGS),
- 
--	COMPOSITE(ACLK_HEVC, "aclk_hevc", mux_pll_src_cpll_gpll_npll_p, 0,
-+	COMPOSITE(ACLK_HEVC, "aclk_hevc", mux_pll_src_cgn_pll_nonvop_p, 0,
- 			RK3288_CLKSEL_CON(39), 14, 2, MFLAGS, 8, 5, DFLAGS,
- 			RK3288_CLKGATE_CON(13), 13, GFLAGS),
- 	DIV(HCLK_HEVC, "hclk_hevc", "aclk_hevc", 0,
- 			RK3288_CLKSEL_CON(40), 12, 2, DFLAGS),
- 
--	COMPOSITE(SCLK_HEVC_CABAC, "sclk_hevc_cabac", mux_pll_src_cpll_gpll_npll_p, 0,
-+	COMPOSITE(SCLK_HEVC_CABAC, "sclk_hevc_cabac", mux_pll_src_cgn_pll_nonvop_p, 0,
- 			RK3288_CLKSEL_CON(42), 6, 2, MFLAGS, 0, 5, DFLAGS,
- 			RK3288_CLKGATE_CON(13), 14, GFLAGS),
--	COMPOSITE(SCLK_HEVC_CORE, "sclk_hevc_core", mux_pll_src_cpll_gpll_npll_p, 0,
-+	COMPOSITE(SCLK_HEVC_CORE, "sclk_hevc_core", mux_pll_src_cgn_pll_nonvop_p, 0,
- 			RK3288_CLKSEL_CON(42), 14, 2, MFLAGS, 8, 5, DFLAGS,
- 			RK3288_CLKGATE_CON(13), 15, GFLAGS),
- 
-@@ -573,7 +576,7 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
- 	COMPOSITE(0, "sclk_tspout", mux_tspout_p, 0,
- 			RK3288_CLKSEL_CON(35), 14, 2, MFLAGS, 8, 5, DFLAGS,
- 			RK3288_CLKGATE_CON(4), 11, GFLAGS),
--	COMPOSITE(0, "sclk_tsp", mux_pll_src_cpll_gpll_npll_p, 0,
-+	COMPOSITE(0, "sclk_tsp", mux_pll_src_cgn_pll_nonvop_p, 0,
- 			RK3288_CLKSEL_CON(35), 6, 2, MFLAGS, 0, 5, DFLAGS,
- 			RK3288_CLKGATE_CON(4), 10, GFLAGS),
- 
-@@ -933,5 +936,6 @@ static void __init rk3288_clk_init(struct device_node *np)
- {
- 	struct rockchip_clk_provider *ctx;
-+	s32 npll_vop = -1;
- 
- 	rk3288_cru_base = of_iomap(np, 0);
- 	if (!rk3288_cru_base) {
-@@ -940,6 +944,46 @@ static void __init rk3288_clk_init(struct device_node *np)
- 		return;
- 	}
- 
-+	if (!of_property_read_s32(np, "rockchip,npll-for-vop", &npll_vop)) {
-+		if ((npll_vop < -1) || (npll_vop > 1)) {
-+			pr_warn("%s: invalid VOP to dedicate NPLL to: %d\n",
-+				__func__, npll_vop);
-+		} else if (npll_vop >= 0) {
-+			unsigned int vop_clk_id;
-+			const char ** npll_names;
-+			const char ** non_npll_names;
-+			int i;
-+
-+			/* Firstly, not-VOP needs to not use npll */
-+			mux_pll_src_npll_cpll_gpll_p[0] = "dummy_npll";
-+			mux_pll_src_cgn_pll_nonvop_p[2] = "dummy_npll";
-+			mux_pll_src_cpll_gll_usb_npll_p[3] = "dummy_npll";
-+
-+			/* Then the npll VOP needs to only use npll, and the other one not use npll. */
-+			if (npll_vop) {
-+				vop_clk_id = DCLK_VOP1;
-+				npll_names = mux_pll_src_cgn_pll_vop1_p;
-+				non_npll_names = mux_pll_src_cgn_pll_vop0_p;
-+			} else {
-+				vop_clk_id = DCLK_VOP0;
-+				npll_names = mux_pll_src_cgn_pll_vop0_p;
-+				non_npll_names = mux_pll_src_cgn_pll_vop1_p;
-+			}
-+			npll_names[0] = "dummy_cpll";
-+			npll_names[1] = "dummy_gpll";
-+			non_npll_names[2] = "dummy_npll";
-+
-+			/* Lastly the npll-dedicated-VOP needs to be able to control npll. */
-+			for (i = 0; i < ARRAY_SIZE(rk3288_clk_branches); i++) {
-+				if (rk3288_clk_branches[i].id == vop_clk_id) {
-+					rk3288_clk_branches[i].flags |= CLK_SET_RATE_PARENT;
-+					break;
-+				}
-+			}
-+			pr_debug("%s: npll dedicated for VOP %d\n", __func__, npll_vop);
-+		}
-+	}
-+
- 	ctx = rockchip_clk_init(np, rk3288_cru_base, CLK_NR_CLKS);
- 	if (IS_ERR(ctx)) {
- 		pr_err("%s: rockchip clk init failed\n", __func__);
-diff --git a/drivers/clk/rockchip/clk.h b/drivers/clk/rockchip/clk.h
-index 6b53fff4c..dbda9d281 100644
---- a/drivers/clk/rockchip/clk.h
-+++ b/drivers/clk/rockchip/clk.h
-@@ -382,6 +382,9 @@ struct clk *rockchip_clk_register_muxgrf(const char *name,
- 
- #define PNAME(x) static const char *const x[] __initconst
- 
-+/* For when you want to be able to modify the pointers. */
-+#define PNAME_ED(x) static const char * x[] __initdata
-+
- enum rockchip_clk_branch_type {
- 	branch_composite,
- 	branch_mux,
--- 
-2.16.4
-

buildroot-external/board/asus/tinker/patches/linux/2009-drm-dw_hdmi-rockchip-better-clock-selection-logic-an.patch

@@ -1,434 +0,0 @@
-From 6c86916e81fa18394d9b57b4af44f9948e100e96 Mon Sep 17 00:00:00 2001
-From: "Miouyouyou (Myy)" <myy@miouyouyou.fr>
-Date: Sat, 29 Sep 2018 03:02:10 +0200
-Subject: [PATCH 6/6] drm: dw_hdmi-rockchip: better clock selection logic and
- dts-based rate list
-
-This patch is taken from Urja Rannikko ( @urjaman ) patchset here :
-https://github.com/urjaman/arch-c201/blob/master/linux-c201/0020-RK3288-HDMI-clock-hacks-combined.patch
-https://www.spinics.net/lists/arm-kernel/msg673156.html
-
-The original description was :
-    This contains traces of the following commits from the ChromeOS 3.14
-    tree, which improve RF/EMI performance and detach the clock selection
-    logic from the HDMI PHY configurations, plus support for configuring
-    the allowed clock rates via device tree as they are dependent on
-    PLL configuration and maybe even the PCB layout and other hardware things,
-    eg. interference to wifi or such (EMI).
-
-    Rates that were allowed previous to this patch are added as the fallback
-    list if no dts configuration exists.
-
-    CHROMIUM: drm: rockchip/dw_hdmi-rockchip: Adjust rockchip_mpll_cfg for 146.25
-    CHROMIUM: drm: rockchip/dw_hdmi-rockchip: expand the informal mpll config
-    CHROMIUM: drm: rockchip/dw_hdmi-rockchip: add slop to more tables
-    CHROMIUM: drm: rockchip/dw_hdmi-rockchip: redo rockchip hdmi to allow slop
-    CHROMIUM: drm: rockchip/dw_hdmi-rockchip: Use auto-generated tables
-    CHROMIUM: drm: rockchip/dw_hdmi-rockchip: Fixup the clock to be what we expect
-    CHROMIUM: drm/rockchip: hdmi: adjust cklvl & txlvl for RF/EMI
-    CHROMIUM: drm: rockchip/dw_hdmi-rockchip: Set cur_ctr to 0 always
-    CHROMIUM: drm: rockchip/dw_hdmi-rockchip: Decrease slop
-
-https://www.spinics.net/lists/arm-kernel/msg673163.html
-
-This is the patch that takes into account the new property
-"rockchip,hdmi-rates-hz" that allows the definition of the HDMI
-frequencies in the DTS file.
-This also change a lot of HDMI frequencies definition, so that
-*will* require some extensive testing.
-
-Still, if it works fine, this should make tinkering the HDMI
-frequencies easier, in case you have a very special HDMI screen.
-
-Signed-off-by: Miouyouyou (Myy) <myy@miouyouyou.fr>
----
-diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
-index cdc304d4c..91c7dc07b 100644
---- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
-+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
-@@ -73,122 +73,141 @@ struct rockchip_hdmi {
- 	struct clk *grf_clk;
- 	struct dw_hdmi *hdmi;
- 	struct phy *phy;
-+	u32* rates;
-+	u32 rates_cnt;
- };
- 
-+#define CLK_SLOP(clk)		((clk) / 1000)
-+#define CLK_PLUS_SLOP(clk)	((clk) + CLK_SLOP(clk))
-+
- #define to_rockchip_hdmi(x)	container_of(x, struct rockchip_hdmi, x)
- 
-+/* These were the rates allowed by the driver before rates list in device tree,
-+ * so keep them around as a fallback */
-+static const u32 dw_hdmi_fallback_rates[] = {
-+	27000000,
-+	36000000,
-+	40000000,
-+	54000000,
-+	65000000,
-+	66000000,
-+	74250000,
-+	83500000,
-+	106500000,
-+	108000000,
-+	146250000,
-+	148500000
-+};
-+
- static const struct dw_hdmi_mpll_config rockchip_mpll_cfg[] = {
- 	{
--		27000000, {
--			{ 0x00b3, 0x0000},
--			{ 0x2153, 0x0000},
--			{ 0x40f3, 0x0000}
-+		30666000, {
-+			{ 0x00b3, 0x0000 },
-+			{ 0x2153, 0x0000 },
-+			{ 0x40f3, 0x0000 },
-+		},
-+	},  {
-+		36800000, {
-+			{ 0x00b3, 0x0000 },
-+			{ 0x2153, 0x0000 },
-+			{ 0x40a2, 0x0001 },
- 		},
--	}, {
--		36000000, {
--			{ 0x00b3, 0x0000},
--			{ 0x2153, 0x0000},
--			{ 0x40f3, 0x0000}
-+	},  {
-+		46000000, {
-+			{ 0x00b3, 0x0000 },
-+			{ 0x2142, 0x0001 },
-+			{ 0x40a2, 0x0001 },
- 		},
--	}, {
--		40000000, {
--			{ 0x00b3, 0x0000},
--			{ 0x2153, 0x0000},
--			{ 0x40f3, 0x0000}
-+	},  {
-+		61333000, {
-+			{ 0x0072, 0x0001 },
-+			{ 0x2142, 0x0001 },
-+			{ 0x40a2, 0x0001 },
- 		},
--	}, {
--		54000000, {
--			{ 0x0072, 0x0001},
--			{ 0x2142, 0x0001},
--			{ 0x40a2, 0x0001},
-+	},  {
-+		73600000, {
-+			{ 0x0072, 0x0001 },
-+			{ 0x2142, 0x0001 },
-+			{ 0x4061, 0x0002 },
- 		},
--	}, {
--		65000000, {
--			{ 0x0072, 0x0001},
--			{ 0x2142, 0x0001},
--			{ 0x40a2, 0x0001},
-+	},  {
-+		92000000, {
-+			{ 0x0072, 0x0001 },
-+			{ 0x2145, 0x0002 },
-+			{ 0x4061, 0x0002 },
- 		},
--	}, {
--		66000000, {
--			{ 0x013e, 0x0003},
--			{ 0x217e, 0x0002},
--			{ 0x4061, 0x0002}
-+	},  {
-+		122666000, {
-+			{ 0x0051, 0x0002 },
-+			{ 0x2145, 0x0002 },
-+			{ 0x4061, 0x0002 },
- 		},
--	}, {
--		74250000, {
--			{ 0x0072, 0x0001},
--			{ 0x2145, 0x0002},
--			{ 0x4061, 0x0002}
-+	},  {
-+		147200000, {
-+			{ 0x0051, 0x0002 },
-+			{ 0x2145, 0x0002 },
-+			{ 0x4064, 0x0003 },
- 		},
--	}, {
--		83500000, {
--			{ 0x0072, 0x0001},
-+	},  {
-+		184000000, {
-+			{ 0x0051, 0x0002 },
-+			{ 0x214c, 0x0003 },
-+			{ 0x4064, 0x0003 },
- 		},
--	}, {
--		108000000, {
--			{ 0x0051, 0x0002},
--			{ 0x2145, 0x0002},
--			{ 0x4061, 0x0002}
-+	},  {
-+		226666000, {
-+			{ 0x0040, 0x0003 },
-+			{ 0x214c, 0x0003 },
-+			{ 0x4064, 0x0003 },
- 		},
--	}, {
--		106500000, {
--			{ 0x0051, 0x0002},
--			{ 0x2145, 0x0002},
--			{ 0x4061, 0x0002}
-+	},  {
-+		272000000, {
-+			{ 0x0040, 0x0003 },
-+			{ 0x214c, 0x0003 },
-+			{ 0x5a64, 0x0003 },
- 		},
--	}, {
--		146250000, {
--			{ 0x0051, 0x0002},
--			{ 0x2145, 0x0002},
--			{ 0x4061, 0x0002}
-+	},  {
-+		340000000, {
-+			{ 0x0040, 0x0003 },
-+			{ 0x3b4c, 0x0003 },
-+			{ 0x5a64, 0x0003 },
- 		},
--	}, {
--		148500000, {
--			{ 0x0051, 0x0003},
--			{ 0x214c, 0x0003},
--			{ 0x4064, 0x0003}
-+	},  {
-+		600000000, {
-+			{ 0x1a40, 0x0003 },
-+			{ 0x3b4c, 0x0003 },
-+			{ 0x5a64, 0x0003 },
- 		},
--	}, {
-+	},  {
- 		~0UL, {
--			{ 0x00a0, 0x000a },
--			{ 0x2001, 0x000f },
--			{ 0x4002, 0x000f },
-+			{ 0x0000, 0x0000 },
-+			{ 0x0000, 0x0000 },
-+			{ 0x0000, 0x0000 },
- 		},
- 	}
- };
- 
- static const struct dw_hdmi_curr_ctrl rockchip_cur_ctr[] = {
--	/*      pixelclk    bpp8    bpp10   bpp12 */
-+	/*      pixelclk     bpp8    bpp10   bpp12 */
- 	{
--		40000000,  { 0x0018, 0x0018, 0x0018 },
--	}, {
--		65000000,  { 0x0028, 0x0028, 0x0028 },
--	}, {
--		66000000,  { 0x0038, 0x0038, 0x0038 },
--	}, {
--		74250000,  { 0x0028, 0x0038, 0x0038 },
--	}, {
--		83500000,  { 0x0028, 0x0038, 0x0038 },
--	}, {
--		146250000, { 0x0038, 0x0038, 0x0038 },
--	}, {
--		148500000, { 0x0000, 0x0038, 0x0038 },
--	}, {
--		~0UL,      { 0x0000, 0x0000, 0x0000},
--	}
-+		600000000, { 0x0000, 0x0000, 0x0000 },
-+	},  {
-+		~0UL,      { 0x0000, 0x0000, 0x0000 },
-+	},
- };
- 
- static const struct dw_hdmi_phy_config rockchip_phy_config[] = {
- 	/*pixelclk   symbol   term   vlev*/
--	{ 74250000,  0x8009, 0x0004, 0x0272},
--	{ 148500000, 0x802b, 0x0004, 0x028d},
--	{ 297000000, 0x8039, 0x0005, 0x028d},
--	{ ~0UL,	     0x0000, 0x0000, 0x0000}
-+	{ CLK_PLUS_SLOP(74250000),  0x8009, 0x0004, 0x0272},
-+	{ CLK_PLUS_SLOP(165000000), 0x802b, 0x0004, 0x0209},
-+	{ CLK_PLUS_SLOP(297000000), 0x8039, 0x0005, 0x028d},
-+	{ ~0UL,	                    0x0000, 0x0000, 0x0000}
- };
- 
- static int rockchip_hdmi_parse_dt(struct rockchip_hdmi *hdmi)
- {
- 	struct device_node *np = hdmi->dev->of_node;
-+	int rates_cnt;
- 
- 	hdmi->regmap = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
- 	if (IS_ERR(hdmi->regmap)) {
-@@ -216,26 +235,55 @@ static int rockchip_hdmi_parse_dt(struct rockchip_hdmi *hdmi)
- 		return PTR_ERR(hdmi->grf_clk);
- 	}
- 
-+	if ((rates_cnt = of_property_count_u32_elems(np, "rockchip,hdmi-rates-hz")) > 0) {
-+		int rv;
-+		u32 *rates = devm_kmalloc_array(hdmi->dev, rates_cnt, sizeof(u32), GFP_KERNEL);
-+		if (!rates)
-+			return -ENOMEM;
-+		rv = of_property_read_u32_array(np, "rockchip,hdmi-rates-hz", rates, rates_cnt);
-+		if (rv)
-+			return rv;
-+		hdmi->rates = rates;
-+		hdmi->rates_cnt = rates_cnt;
-+	} else {
-+		rates_cnt = ARRAY_SIZE(dw_hdmi_fallback_rates);
-+		hdmi->rates = devm_kmalloc_array(hdmi->dev, rates_cnt, sizeof(u32), GFP_KERNEL);
-+		if (!hdmi->rates)
-+			return -ENOMEM;
-+		memcpy(hdmi->rates, dw_hdmi_fallback_rates, rates_cnt * sizeof(u32));
-+		hdmi->rates_cnt = rates_cnt;
-+	}
-+
-+
- 	return 0;
- }
- 
- static enum drm_mode_status
--dw_hdmi_rockchip_mode_valid(struct drm_connector *connector,
-+dw_hdmi_rockchip_encoder_mode_valid(struct drm_encoder *encoder,
- 			    const struct drm_display_mode *mode)
- {
--	const struct dw_hdmi_mpll_config *mpll_cfg = rockchip_mpll_cfg;
-+	struct rockchip_hdmi *hdmi = to_rockchip_hdmi(encoder);
- 	int pclk = mode->clock * 1000;
--	bool valid = false;
-+	int num_rates = hdmi->rates_cnt;
- 	int i;
- 
--	for (i = 0; mpll_cfg[i].mpixelclock != (~0UL); i++) {
--		if (pclk == mpll_cfg[i].mpixelclock) {
--			valid = true;
--			break;
--		}
-+	/*
-+	 * Pixel clocks we support are always < 2GHz and so fit in an
-+	 * int.  We should make sure source rate does too so we don't get
-+	 * overflow when we multiply by 1000.
-+	 */
-+	if (mode->clock > INT_MAX / 1000)
-+		return MODE_BAD;
-+
-+	for (i = 0; i < num_rates; i++) {
-+		int slop = CLK_SLOP(pclk);
-+
-+		if ((pclk >= hdmi->rates[i] - slop) &&
-+		    (pclk <= hdmi->rates[i] + slop))
-+			return MODE_OK;
- 	}
- 
--	return (valid) ? MODE_OK : MODE_BAD;
-+	return MODE_BAD;
- }
- 
- static const struct drm_encoder_funcs dw_hdmi_rockchip_encoder_funcs = {
-@@ -251,7 +299,39 @@ dw_hdmi_rockchip_encoder_mode_fixup(struct drm_encoder *encoder,
- 				    const struct drm_display_mode *mode,
- 				    struct drm_display_mode *adj_mode)
- {
--	return true;
-+	struct rockchip_hdmi *hdmi = to_rockchip_hdmi(encoder);
-+	int pclk = adj_mode->clock * 1000;
-+	int best_diff = INT_MAX;
-+	int best_clock = 0;
-+	int slop;
-+	int i;
-+
-+	/* Pick the best clock */
-+	for (i = 0; i < hdmi->rates_cnt; i++) {
-+		int diff = hdmi->rates[i] - pclk;
-+
-+		if (diff < 0)
-+			diff = -diff;
-+		if (diff < best_diff) {
-+			best_diff = diff;
-+			best_clock = hdmi->rates[i];
-+
-+			/* Bail early if we're exact */
-+			if (best_diff == 0)
-+				return true;
-+		}
-+	}
-+
-+	/* Double check that it's OK */
-+	slop = CLK_SLOP(pclk);
-+	if ((pclk >= best_clock - slop) && (pclk <= best_clock + slop)) {
-+		adj_mode->clock = DIV_ROUND_UP(best_clock, 1000);
-+		return true;
-+	}
-+
-+	/* Shoudn't be here; we should have said rate wasn't valid */
-+	dev_warn(hdmi->dev, "tried to set invalid rate %d\n", adj_mode->clock);
-+	return false;
- }
- 
- static void dw_hdmi_rockchip_encoder_mode_set(struct drm_encoder *encoder,
-@@ -307,6 +387,7 @@ dw_hdmi_rockchip_encoder_atomic_check(struct drm_encoder *encoder,
- }
- 
- static const struct drm_encoder_helper_funcs dw_hdmi_rockchip_encoder_helper_funcs = {
-+	.mode_valid = dw_hdmi_rockchip_encoder_mode_valid,
- 	.mode_fixup = dw_hdmi_rockchip_encoder_mode_fixup,
- 	.mode_set   = dw_hdmi_rockchip_encoder_mode_set,
- 	.enable     = dw_hdmi_rockchip_encoder_enable,
-@@ -406,7 +487,6 @@ static struct rockchip_hdmi_chip_data rk3228_chip_data = {
- };
- 
- static const struct dw_hdmi_plat_data rk3228_hdmi_drv_data = {
--	.mode_valid = dw_hdmi_rockchip_mode_valid,
- 	.mpll_cfg = rockchip_mpll_cfg,
- 	.cur_ctr = rockchip_cur_ctr,
- 	.phy_config = rockchip_phy_config,
-@@ -423,7 +503,6 @@ static struct rockchip_hdmi_chip_data rk3288_chip_data = {
- };
- 
- static const struct dw_hdmi_plat_data rk3288_hdmi_drv_data = {
--	.mode_valid = dw_hdmi_rockchip_mode_valid,
- 	.mpll_cfg   = rockchip_mpll_cfg,
- 	.cur_ctr    = rockchip_cur_ctr,
- 	.phy_config = rockchip_phy_config,
-@@ -443,7 +522,6 @@ static struct rockchip_hdmi_chip_data rk3328_chip_data = {
- };
- 
- static const struct dw_hdmi_plat_data rk3328_hdmi_drv_data = {
--	.mode_valid = dw_hdmi_rockchip_mode_valid,
- 	.mpll_cfg = rockchip_mpll_cfg,
- 	.cur_ctr = rockchip_cur_ctr,
- 	.phy_config = rockchip_phy_config,
-@@ -460,7 +538,6 @@ static struct rockchip_hdmi_chip_data rk3399_chip_data = {
- };
- 
- static const struct dw_hdmi_plat_data rk3399_hdmi_drv_data = {
--	.mode_valid = dw_hdmi_rockchip_mode_valid,
- 	.mpll_cfg   = rockchip_mpll_cfg,
- 	.cur_ctr    = rockchip_cur_ctr,
- 	.phy_config = rockchip_phy_config,
-@@ -558,6 +635,7 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
- 	 */
- 	if (IS_ERR(hdmi->hdmi)) {
- 		ret = PTR_ERR(hdmi->hdmi);
-+		devm_kfree(hdmi->dev, hdmi->rates);
- 		drm_encoder_cleanup(encoder);
- 		clk_disable_unprepare(hdmi->vpll_clk);
- 	}
-@@ -570,6 +648,7 @@ static void dw_hdmi_rockchip_unbind(struct device *dev, struct device *master,
- {
- 	struct rockchip_hdmi *hdmi = dev_get_drvdata(dev);
- 
-+	devm_kfree(hdmi->dev, hdmi->rates);
- 	dw_hdmi_unbind(hdmi->hdmi);
- 	clk_disable_unprepare(hdmi->vpll_clk);
- }

buildroot-external/board/asus/tinker/patches/linux/2013-spi-Added-support-for-Tinkerboard-s-SPI-interface.patch

@@ -1,22 +0,0 @@
-From d4d128324b8f8a9f5c441203d94703e41fa07df3 Mon Sep 17 00:00:00 2001
-From: "Miouyouyou (Myy)" <myy@miouyouyou.fr>
-Date: Mon, 5 Nov 2018 19:57:56 +0100
-Subject: [PATCH] spi: Added support for Tinkerboard's SPI interface
-
-Imported from ARMbian
-
-Signed-off-by: Miouyouyou (Myy) <myy@miouyouyou.fr>
----
-
-diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
-index 255786f2e..3a3f2e6fd 100644
---- a/drivers/spi/spidev.c
-+++ b/drivers/spi/spidev.c
-@@ -665,6 +665,7 @@ static const struct of_device_id spidev_dt_ids[] = {
- 	{ .compatible = "lwn,bk4" },
- 	{ .compatible = "dh,dhcom-board" },
- 	{ .compatible = "menlo,m53cpld" },
-+	{ .compatible = "rockchip,spi_tinker" },
- 	{},
- };
- MODULE_DEVICE_TABLE(of, spidev_dt_ids);

buildroot-external/board/asus/tinker/patches/linux/261_gpiomem_driver.patch

@@ -1,395 +0,0 @@
-diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
-index e5b7ef1a5..f88c913ff 100644
---- a/arch/arm/boot/dts/rk3288-tinker.dtsi
-+++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
-@@ -544,3 +544,6 @@
- &wdt {
- 	status = "okay";
- };
-+&gpiomem {
-+    status = "okay";
-+};
-diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
-index f3ca55496..14bbcb192 100644
---- a/arch/arm/boot/dts/rk3288.dtsi
-+++ b/arch/arm/boot/dts/rk3288.dtsi
-@@ -1418,6 +1418,12 @@
- 		interrupts = <GIC_PPI 9 0xf04>;
- 	};
- 
-+	gpiomem: rk3288-gpiomem@ff750000 {
-+		compatible = "rockchip,rk3288-gpiomem";
-+		reg = <0x0 0xff750000 0x0 0x1000>;
-+		status = "disabled";
-+	};
-+
- 	pinctrl: pinctrl {
- 		compatible = "rockchip,rk3288-pinctrl";
- 		rockchip,grf = <&grf>;
-
-diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
-index 3143db5..9c18b74 100644
---- a/drivers/char/Kconfig
-+++ b/drivers/char/Kconfig
-@@ -5,6 +5,7 @@
- menu "Character devices"
- 
- source "drivers/tty/Kconfig"
-+source "drivers/char/rockchip/Kconfig"
- 
- config DEVMEM
- 	bool "/dev/mem virtual device support"
-diff --git a/drivers/char/Makefile b/drivers/char/Makefile
-index d8a7579..290cb32 100644
---- a/drivers/char/Makefile
-+++ b/drivers/char/Makefile
-@@ -51,6 +51,8 @@ obj-$(CONFIG_PS3_FLASH)		+= ps3flash.o
- obj-$(CONFIG_JS_RTC)		+= js-rtc.o
- js-rtc-y = rtc.o
- 
-+obj-$(CONFIG_ARCH_ROCKCHIP)	+= rockchip/
-+
- obj-$(CONFIG_XILLYBUS)		+= xillybus/
- obj-$(CONFIG_POWERNV_OP_PANEL)	+= powernv-op-panel.o
- obj-$(CONFIG_ADI)		+= adi.o
-diff --git a/drivers/char/rockchip/Kconfig b/drivers/char/rockchip/Kconfig
-new file mode 100644
-index 0000000..6e97486
---- /dev/null
-+++ b/drivers/char/rockchip/Kconfig
-@@ -0,0 +1,16 @@
-+#
-+# Broadcom char driver config
-+#
-+
-+menuconfig RK_CHAR_DRIVERS
-+	bool "Rockchip Char Drivers"
-+	help
-+	  Rockchip's char drivers
-+
-+config RK3288_DEVGPIOMEM
-+	tristate "/dev/gpiomem rootless GPIO access via mmap() on the RK3288"
-+	default y
-+	help
-+		Provides users with root-free access to the GPIO registers
-+		on the 3288. Calling mmap(/dev/gpiomem) will map the GPIO
-+		register page to the user's pointer.
-\ No newline at end of file
-diff --git a/drivers/char/rockchip/Makefile b/drivers/char/rockchip/Makefile
-new file mode 100644
-index 0000000..2287ec2
---- /dev/null
-+++ b/drivers/char/rockchip/Makefile
-@@ -0,0 +1 @@
-+obj-$(CONFIG_RK3288_DEVGPIOMEM)+= rk3288-gpiomem.o
-\ No newline at end of file
-diff --git a/drivers/char/rockchip/rk3288-gpiomem.c b/drivers/char/rockchip/rk3288-gpiomem.c
-new file mode 100644
-index 0000000..984471c
---- /dev/null
-+++ b/drivers/char/rockchip/rk3288-gpiomem.c
-@@ -0,0 +1,303 @@
-+/**
-+ * GPIO memory device driver
-+ *
-+ * Creates a chardev /dev/gpiomem which will provide user access to
-+ * the rk3288's GPIO registers when it is mmap()'d.
-+ * No longer need root for user GPIO access, but without relaxing permissions
-+ * on /dev/mem.
-+ *
-+ * Written by Luke Wren <luke@raspberrypi.org>
-+ * Copyright (c) 2015, Raspberry Pi (Trading) Ltd.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions
-+ * are met:
-+ * 1. Redistributions of source code must retain the above copyright
-+ *    notice, this list of conditions, and the following disclaimer,
-+ *    without modification.
-+ * 2. Redistributions in binary form must reproduce the above copyright
-+ *    notice, this list of conditions and the following disclaimer in the
-+ *    documentation and/or other materials provided with the distribution.
-+ * 3. The names of the above-listed copyright holders may not be used
-+ *    to endorse or promote products derived from this software without
-+ *    specific prior written permission.
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") version 2, as published by the Free
-+ * Software Foundation.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
-+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
-+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
-+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/platform_device.h>
-+#include <linux/mm.h>
-+#include <linux/slab.h>
-+#include <linux/cdev.h>
-+#include <linux/pagemap.h>
-+#include <linux/io.h>
-+
-+#define DEVICE_NAME "rk3288-gpiomem"
-+#define DRIVER_NAME "gpiomem-rk3288"
-+#define DEVICE_MINOR 0
-+
-+struct rk3288_gpiomem_instance {
-+	unsigned long gpio_regs_phys;
-+	struct device *dev;
-+};
-+
-+static struct cdev rk3288_gpiomem_cdev;
-+static dev_t rk3288_gpiomem_devid;
-+static struct class *rk3288_gpiomem_class;
-+static struct device *rk3288_gpiomem_dev;
-+static struct rk3288_gpiomem_instance *inst;
-+
-+
-+/****************************************************************************
-+*
-+*   GPIO mem chardev file ops
-+*
-+***************************************************************************/
-+
-+static int rk3288_gpiomem_open(struct inode *inode, struct file *file)
-+{
-+	int dev = iminor(inode);
-+	int ret = 0;
-+
-+	if (dev != DEVICE_MINOR) {
-+		dev_err(inst->dev, "Unknown minor device: %d", dev);
-+		ret = -ENXIO;
-+	}
-+	return ret;
-+}
-+
-+static int rk3288_gpiomem_release(struct inode *inode, struct file *file)
-+{
-+	int dev = iminor(inode);
-+	int ret = 0;
-+
-+	if (dev != DEVICE_MINOR) {
-+		dev_err(inst->dev, "Unknown minor device %d", dev);
-+		ret = -ENXIO;
-+	}
-+	return ret;
-+}
-+
-+static const struct vm_operations_struct rk3288_gpiomem_vm_ops = {
-+#ifdef CONFIG_HAVE_IOREMAP_PROT
-+	.access = generic_access_phys
-+#endif
-+};
-+static int address_is_allowed(unsigned long pfn, unsigned long size)
-+{
-+    unsigned long address = pfn << PAGE_SHIFT;
-+
-+    dev_info(inst->dev, "address_is_allowed.pfn: 0x%08lx", address);
-+
-+    switch(address) {
-+
-+        case 0xff750000:
-+        case 0xff760000:
-+        case 0xff780000:
-+        case 0xff790000:
-+        case 0xff7a0000:
-+        case 0xff7b0000:
-+        case 0xff7c0000:
-+        case 0xff7d0000:
-+        case 0xff7e0000:
-+        case 0xff7f0000:
-+        case 0xff7f2000:
-+        case 0xff770000:
-+        case 0xff730000:
-+        case 0xff680000:
-+            dev_info(inst->dev, "address_is_allowed.return 1");
-+            return 1;
-+            break; 
-+        default :
-+            dev_info(inst->dev, "address_is_allowed.return 0");
-+	        return 0;
-+    }
-+}
-+
-+static int rk3288_gpiomem_mmap(struct file *file, struct vm_area_struct *vma)
-+{
-+
-+    size_t size;
-+
-+	size = vma->vm_end - vma->vm_start;
-+
-+
-+	if (!address_is_allowed(vma->vm_pgoff, size))
-+		return -EPERM;
-+
-+	vma->vm_page_prot = phys_mem_access_prot(file, vma->vm_pgoff,
-+						 size,
-+						 vma->vm_page_prot);
-+
-+	vma->vm_ops =  &rk3288_gpiomem_vm_ops;
-+
-+	/* Remap-pfn-range will mark the range VM_IO */
-+	if (remap_pfn_range(vma,
-+			    vma->vm_start,
-+			    vma->vm_pgoff,
-+			    size,
-+			    vma->vm_page_prot)) {
-+		return -EAGAIN;
-+	}
-+
-+	return 0;
-+}
-+
-+static const struct file_operations
-+rk3288_gpiomem_fops = {
-+	.owner = THIS_MODULE,
-+	.open = rk3288_gpiomem_open,
-+	.release = rk3288_gpiomem_release,
-+	.mmap = rk3288_gpiomem_mmap,
-+};
-+
-+static int rk3288_gpiomem_dev_uevent(struct device *dev, struct kobj_uevent_env *env)
-+{
-+    add_uevent_var(env, "DEVMODE=%#o", 0666);
-+    return 0;
-+}
-+
-+ /****************************************************************************
-+*
-+*   Probe and remove functions
-+*
-+***************************************************************************/
-+
-+
-+static int rk3288_gpiomem_probe(struct platform_device *pdev)
-+{
-+	int err;
-+	void *ptr_err;
-+	struct device *dev = &pdev->dev;
-+	struct resource *ioresource;
-+
-+	/* Allocate buffers and instance data */
-+
-+	inst = kzalloc(sizeof(struct rk3288_gpiomem_instance), GFP_KERNEL);
-+
-+	if (!inst) {
-+		err = -ENOMEM;
-+		goto failed_inst_alloc;
-+	}
-+
-+	inst->dev = dev;
-+
-+	ioresource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (ioresource) {
-+		inst->gpio_regs_phys = ioresource->start;
-+	} else {
-+		dev_err(inst->dev, "failed to get IO resource");
-+		err = -ENOENT;
-+		goto failed_get_resource;
-+	}
-+
-+	/* Create character device entries */
-+
-+	err = alloc_chrdev_region(&rk3288_gpiomem_devid,
-+				  DEVICE_MINOR, 1, DEVICE_NAME);
-+	if (err != 0) {
-+		dev_err(inst->dev, "unable to allocate device number");
-+		goto failed_alloc_chrdev;
-+	}
-+	cdev_init(&rk3288_gpiomem_cdev, &rk3288_gpiomem_fops);
-+	rk3288_gpiomem_cdev.owner = THIS_MODULE;
-+	err = cdev_add(&rk3288_gpiomem_cdev, rk3288_gpiomem_devid, 1);
-+	if (err != 0) {
-+		dev_err(inst->dev, "unable to register device");
-+		goto failed_cdev_add;
-+	}
-+
-+	/* Create sysfs entries */
-+
-+	rk3288_gpiomem_class = class_create(THIS_MODULE, DEVICE_NAME);
-+	ptr_err = rk3288_gpiomem_class;
-+	if (IS_ERR(ptr_err))
-+		goto failed_class_create;
-+	rk3288_gpiomem_class->dev_uevent = rk3288_gpiomem_dev_uevent;
-+	rk3288_gpiomem_dev = device_create(rk3288_gpiomem_class, NULL,
-+					rk3288_gpiomem_devid, NULL,
-+					"gpiomem");
-+	ptr_err = rk3288_gpiomem_dev;
-+	if (IS_ERR(ptr_err))
-+		goto failed_device_create;
-+
-+	dev_info(inst->dev, "Initialised: Registers at 0x%08lx",
-+		inst->gpio_regs_phys);
-+
-+	return 0;
-+
-+failed_device_create:
-+	class_destroy(rk3288_gpiomem_class);
-+failed_class_create:
-+	cdev_del(&rk3288_gpiomem_cdev);
-+	err = PTR_ERR(ptr_err);
-+failed_cdev_add:
-+	unregister_chrdev_region(rk3288_gpiomem_devid, 1);
-+failed_alloc_chrdev:
-+failed_get_resource:
-+	kfree(inst);
-+failed_inst_alloc:
-+	dev_err(inst->dev, "could not load rk3288_gpiomem");
-+	return err;
-+}
-+
-+static int rk3288_gpiomem_remove(struct platform_device *pdev)
-+{
-+	struct device *dev = inst->dev;
-+
-+	kfree(inst);
-+	device_destroy(rk3288_gpiomem_class, rk3288_gpiomem_devid);
-+	class_destroy(rk3288_gpiomem_class);
-+	cdev_del(&rk3288_gpiomem_cdev);
-+	unregister_chrdev_region(rk3288_gpiomem_devid, 1);
-+
-+	dev_info(dev, "GPIO mem driver removed - OK");
-+	return 0;
-+}
-+
-+ /****************************************************************************
-+*
-+*   Register the driver with device tree
-+*
-+***************************************************************************/
-+
-+static const struct of_device_id rk3288_gpiomem_of_match[] = {
-+	{.compatible = "rockchip,rk3288-gpiomem",},
-+	{ /* sentinel */ },
-+};
-+
-+MODULE_DEVICE_TABLE(of, rk3288_gpiomem_of_match);
-+
-+static struct platform_driver rk3288_gpiomem_driver = {
-+	.probe = rk3288_gpiomem_probe,
-+	.remove = rk3288_gpiomem_remove,
-+	.driver = {
-+		   .name = DRIVER_NAME,
-+		   .owner = THIS_MODULE,
-+		   .of_match_table = rk3288_gpiomem_of_match,
-+		   },
-+};
-+
-+module_platform_driver(rk3288_gpiomem_driver);
-+
-+MODULE_ALIAS("platform:gpiomem-rk3288");
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("gpiomem driver for accessing GPIO from userspace");
-+MODULE_AUTHOR("Luke Wren <luke@raspberrypi.org>");
-\ No newline at end of file

buildroot-external/board/asus/tinker/patches/linux/3000_DTS_rearrange_thermal_zones.patch

@@ -1,32 +0,0 @@
-diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
-index bc3601a..37ae378 100644
---- a/arch/arm/boot/dts/rk3288.dtsi
-+++ b/arch/arm/boot/dts/rk3288.dtsi
-@@ -467,13 +467,6 @@
- 	};
- 
- 	thermal-zones {
--		reserve_thermal: reserve_thermal {
--			polling-delay-passive = <1000>; /* milliseconds */
--			polling-delay = <5000>; /* milliseconds */
--
--			thermal-sensors = <&tsadc 0>;
--		};
--
- 		cpu_thermal: cpu_thermal {
- 			polling-delay-passive = <100>; /* milliseconds */
- 			polling-delay = <5000>; /* milliseconds */
-@@ -539,6 +532,13 @@
- 				};
- 			};
- 		};
-+
-+		reserve_thermal: reserve_thermal {
-+			polling-delay-passive = <1000>; /* milliseconds */
-+			polling-delay = <5000>; /* milliseconds */
-+
-+			thermal-sensors = <&tsadc 0>;
-+		};
- 	};
- 
- 	tsadc: tsadc@ff280000 {

buildroot-external/board/asus/tinker/patches/linux/RK3288-1.8GHz-and-boost.patch

@@ -1,80 +0,0 @@
-diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
-index 58bd91539..9c0dac199 100644
---- a/arch/arm/boot/dts/rk3288.dtsi
-+++ b/arch/arm/boot/dts/rk3288.dtsi
-@@ -153,6 +153,75 @@
- 			opp-hz = /bits/ 64 <1608000000>;
- 			opp-microvolt = <1350000>;
- 		};
-+		opp@1704000000 {
-+			opp-hz = /bits/ 64 <1704000000>;
-+			opp-microvolt = <1350000>;
-+		};
-+		opp@1800000000 {
-+			opp-hz = /bits/ 64 <1800000000>;
-+			opp-microvolt = <1400000>;
-+		};
-+		/* boot-only frequencies below */
-+		opp@1896000000 {
-+			opp-hz = /bits/ 64 <1896000000>;
-+			opp-microvolt = <1425000>;
-+			turbo-mode;
-+		};
-+		opp@1920000000 {
-+			opp-hz = /bits/ 64 <1920000000>;
-+			opp-microvolt = <1425000>;
-+			turbo-mode;
-+		};
-+		opp@1992000000 {
-+			opp-hz = /bits/ 64 <1992000000>;
-+			opp-microvolt = <1450000>;
-+			turbo-mode;
-+		};
-+		opp@2016000000 {
-+			opp-hz = /bits/ 64 <2016000000>;
-+			opp-microvolt = <1475000>;
-+			turbo-mode;
-+		};
-+		opp@2040000000 {
-+			opp-hz = /bits/ 64 <2040000000>;
-+			opp-microvolt = <1475000>;
-+			turbo-mode;
-+		};
-+		opp@2064000000 {
-+			opp-hz = /bits/ 64 <2064000000>;
-+			opp-microvolt = <1475000>;
-+			turbo-mode;
-+		};
-+		opp@2088000000 {
-+			opp-hz = /bits/ 64 <2088000000>;
-+			opp-microvolt = <1500000>;
-+			turbo-mode;
-+		};
-+		opp@2112000000 {
-+			opp-hz = /bits/ 64 <2112000000>;
-+			opp-microvolt = <1500000>;
-+			turbo-mode;
-+		};
-+		opp@2136000000 {
-+			opp-hz = /bits/ 64 <2136000000>;
-+			opp-microvolt = <1500000>;
-+			turbo-mode;
-+		};
-+		opp@2160000000 {
-+			opp-hz = /bits/ 64 <2160000000>;
-+			opp-microvolt = <1500000>;
-+			turbo-mode;
-+		};
-+		opp@2184000000 {
-+			opp-hz = /bits/ 64 <2184000000>;
-+			opp-microvolt = <1500000>;
-+			turbo-mode;
-+		};
-+		opp@2208000000 {
-+			opp-hz = /bits/ 64 <2208000000>;
-+			opp-microvolt = <1500000>;
-+			turbo-mode;
-+		};
- 	};
- 
- 	amba {

buildroot-external/board/asus/tinker/patches/linux/brcmfmac-add-ap6330-firmware.patch

@@ -1,23 +0,0 @@
-diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
-index a907d7b06..ec71996c7 100644
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
-@@ -619,13 +619,17 @@ BRCMF_FW_DEF(4354, "brcmfmac4354-sdio");
- BRCMF_FW_DEF(4356, "brcmfmac4356-sdio");
- BRCMF_FW_DEF(4373, "brcmfmac4373-sdio");
- 
-+/* AMPAK */
-+BRCMF_FW_DEF(AP6330, "brcmfmac-ap6330-sdio");
-+
- static const struct brcmf_firmware_mapping brcmf_sdio_fwnames[] = {
- 	BRCMF_FW_ENTRY(BRCM_CC_43143_CHIP_ID, 0xFFFFFFFF, 43143),
- 	BRCMF_FW_ENTRY(BRCM_CC_43241_CHIP_ID, 0x0000001F, 43241B0),
- 	BRCMF_FW_ENTRY(BRCM_CC_43241_CHIP_ID, 0x00000020, 43241B4),
- 	BRCMF_FW_ENTRY(BRCM_CC_43241_CHIP_ID, 0xFFFFFFC0, 43241B5),
- 	BRCMF_FW_ENTRY(BRCM_CC_4329_CHIP_ID, 0xFFFFFFFF, 4329),
--	BRCMF_FW_ENTRY(BRCM_CC_4330_CHIP_ID, 0xFFFFFFFF, 4330),
-+	BRCMF_FW_ENTRY(BRCM_CC_4330_CHIP_ID, 0xFFFFFFEF, 4330),
-+	BRCMF_FW_ENTRY(BRCM_CC_4330_CHIP_ID, 0x10, AP6330),
- 	BRCMF_FW_ENTRY(BRCM_CC_4334_CHIP_ID, 0xFFFFFFFF, 4334),
- 	BRCMF_FW_ENTRY(BRCM_CC_43340_CHIP_ID, 0xFFFFFFFF, 43340),
- 	BRCMF_FW_ENTRY(BRCM_CC_43341_CHIP_ID, 0xFFFFFFFF, 43340),

buildroot-external/board/asus/tinker/patches/linux/general-adjust-tinker-dts-hdmi-sound.patch

@@ -1,13 +0,0 @@
-diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
-index 01be2bca9..5439e29e0 100644
---- a/arch/arm/boot/dts/rk3288-tinker.dtsi
-+++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
-@@ -64,7 +64,7 @@
- 	sound {
- 		compatible = "simple-audio-card";
- 		simple-audio-card,format = "i2s";
--		simple-audio-card,name = "rockchip,tinker-codec";
-+		simple-audio-card,name = "DW-I2S-HDMI";
- 		simple-audio-card,mclk-fs = <512>;
- 
- 		simple-audio-card,codec {

buildroot-external/board/asus/tinker/patches/linux/general-fix-reboot-from-kwiboo.patch

@@ -1,19 +0,0 @@
-diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
-index 5bd58b95d..48ebe081f 100644
---- a/drivers/mmc/core/core.c
-+++ b/drivers/mmc/core/core.c
-@@ -1684,6 +1684,14 @@ void mmc_power_off(struct mmc_host *host)
- 	if (host->ios.power_mode == MMC_POWER_OFF)
- 		return;
- 
-+        mmc_set_initial_signal_voltage(host);
-+
-+        /*
-+         * This delay should be sufficient to allow the power supply
-+         * to reach the minimum voltage.
-+         */
-+        mmc_delay(host->ios.power_delay_ms);
-+
- 	mmc_pwrseq_power_off(host);
- 
- 	host->ios.clock = 0;

buildroot-external/board/asus/tinker/patches/linux/remove-broken-dtb.patch

@@ -1,22 +0,0 @@
-diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
-index a98dee2ae..d3cef7033 100644
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -916,17 +916,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
- 	rk3288-rock2-square.dtb \
- 	rk3288-tinker.dtb \
- 	rk3288-tinker-s.dtb \
--	rk3288-veyron-brain.dtb \
--	rk3288-veyron-fievel.dtb \
--	rk3288-veyron-jaq.dtb \
--	rk3288-veyron-jerry.dtb \
--	rk3288-veyron-mickey.dtb \
--	rk3288-veyron-mighty.dtb \
--	rk3288-veyron-minnie.dtb \
--	rk3288-veyron-pinky.dtb \
--	rk3288-veyron-speedy.dtb \
--	rk3288-veyron-tiger.dtb \
- 	rk3288-vyasa.dtb
- dtb-$(CONFIG_ARCH_S3C24XX) += \
- 	s3c2416-smdk2416.dtb
- dtb-$(CONFIG_ARCH_S3C64XX) += \

buildroot-external/board/asus/tinker/patches/uboot/0001-SPL-modify-load-address-of-U-Boot.patch

@@ -1,8 +1,8 @@
-From cd1aac268ff58eea28153bbabfb33abc2df52b1f Mon Sep 17 00:00:00 2001
-Message-Id: <cd1aac268ff58eea28153bbabfb33abc2df52b1f.1602103621.git.stefan@agner.ch>
+From 983121a741192153492a61befc0e0fc61b9f8b14 Mon Sep 17 00:00:00 2001
+Message-Id: <983121a741192153492a61befc0e0fc61b9f8b14.1617731428.git.stefan@agner.ch>
 From: Pascal Vizeli <pvizeli@syshack.ch>
 Date: Fri, 24 Apr 2020 12:41:50 +0000
-Subject: [PATCH 1/4] SPL: modify load address of U-Boot
+Subject: [PATCH 1/2] SPL: modify load address of U-Boot
 
 Default load address of U-Boot is at sector 16384, which is where HAOS
 has its first partition. Use 0x2000 (8192) instead.
@@ -15,7 +15,7 @@ Signed-off-by: Stefan Agner <stefan@agner.ch>
  2 files changed, 2 insertions(+)
 
 diff --git a/configs/tinker-rk3288_defconfig b/configs/tinker-rk3288_defconfig
-index d459c7f50d..e0682ed479 100644
+index 8686a66d13..c3363821dd 100644
 --- a/configs/tinker-rk3288_defconfig
 +++ b/configs/tinker-rk3288_defconfig
 @@ -88,3 +88,4 @@ CONFIG_VIDEO_ROCKCHIP=y
@@ -24,7 +24,7 @@ index d459c7f50d..e0682ed479 100644
  CONFIG_ERRNO_STR=y
 +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x2000
 diff --git a/configs/tinker-s-rk3288_defconfig b/configs/tinker-s-rk3288_defconfig
-index 68411d863b..1a285baf73 100644
+index 22714833cc..f5dd23577c 100644
 --- a/configs/tinker-s-rk3288_defconfig
 +++ b/configs/tinker-s-rk3288_defconfig
 @@ -90,3 +90,4 @@ CONFIG_DISPLAY_ROCKCHIP_HDMI=y
@@ -33,5 +33,5 @@ index 68411d863b..1a285baf73 100644
  CONFIG_ERRNO_STR=y
 +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x2000
 -- 
-2.28.0
+2.31.1
 

buildroot-external/board/asus/tinker/patches/uboot/0002-pmic-enable-LDO2-vcc33_mipi-at-bootup.patch

@@ -1,10 +1,10 @@
-From 549d98c233b2a8b7cd4b0d4eb9652ad60a8a0f75 Mon Sep 17 00:00:00 2001
-Message-Id: <549d98c233b2a8b7cd4b0d4eb9652ad60a8a0f75.1602103621.git.stefan@agner.ch>
-In-Reply-To: <cd1aac268ff58eea28153bbabfb33abc2df52b1f.1602103621.git.stefan@agner.ch>
-References: <cd1aac268ff58eea28153bbabfb33abc2df52b1f.1602103621.git.stefan@agner.ch>
+From f9195bc5cb18f71117f6efc1c352209e62c53706 Mon Sep 17 00:00:00 2001
+Message-Id: <f9195bc5cb18f71117f6efc1c352209e62c53706.1617731428.git.stefan@agner.ch>
+In-Reply-To: <983121a741192153492a61befc0e0fc61b9f8b14.1617731428.git.stefan@agner.ch>
+References: <983121a741192153492a61befc0e0fc61b9f8b14.1617731428.git.stefan@agner.ch>
 From: Pascal Vizeli <pvizeli@syshack.ch>
 Date: Fri, 24 Apr 2020 11:37:55 +0000
-Subject: [PATCH 4/4] pmic: enable LDO2 vcc33_mipi at bootup
+Subject: [PATCH 2/2] pmic: enable LDO2 vcc33_mipi at bootup
 
 Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch>
 ---
@@ -64,5 +64,5 @@ index f85209c649..6fa1bb0c66 100644
 +}
 +#endif
 -- 
-2.28.0
+2.31.1
 

buildroot-external/board/asus/tinker/patches/uboot/0002-rockchip-dts-tinker-move-i2c-node-to-shared-device-t.patch

@@ -1,55 +0,0 @@
-From d49ad12ee89d0d64f1f594bcad7de0e4f9631add Mon Sep 17 00:00:00 2001
-Message-Id: <d49ad12ee89d0d64f1f594bcad7de0e4f9631add.1602103621.git.stefan@agner.ch>
-In-Reply-To: <cd1aac268ff58eea28153bbabfb33abc2df52b1f.1602103621.git.stefan@agner.ch>
-References: <cd1aac268ff58eea28153bbabfb33abc2df52b1f.1602103621.git.stefan@agner.ch>
-From: Stefan Agner <stefan@agner.ch>
-Date: Fri, 4 Sep 2020 15:40:55 +0200
-Subject: [PATCH 2/4] rockchip: dts: tinker: move i2c node to shared device
- tree
-
-The I2C EEPROM is present on Tinker Board S as well. Move the i2c node
-to the shared, U-Boot specific rk3288-tinker-u-boot.dtsi device tree.
-
-Cc: Jonas Karlman <jonas@kwiboo.se>
-Signed-off-by: Stefan Agner <stefan@agner.ch>
----
- arch/arm/dts/rk3288-tinker-u-boot.dtsi | 7 +++++++
- arch/arm/dts/rk3288-tinker.dts         | 7 -------
- 2 files changed, 7 insertions(+), 7 deletions(-)
-
-diff --git a/arch/arm/dts/rk3288-tinker-u-boot.dtsi b/arch/arm/dts/rk3288-tinker-u-boot.dtsi
-index 732aa4f91f..3d169906fd 100644
---- a/arch/arm/dts/rk3288-tinker-u-boot.dtsi
-+++ b/arch/arm/dts/rk3288-tinker-u-boot.dtsi
-@@ -17,6 +17,13 @@
- 	rockchip,sdram-params = <0x20d266a4 0x5b6 2 533000000 6 9 0>;
- };
- 
-+&i2c2 {
-+    m24c08@50 {
-+        compatible = "at,24c08", "i2c-eeprom";
-+        reg = <0x50>;
-+    };
-+};
-+
- &pinctrl {
- 	u-boot,dm-pre-reloc;
- };
-diff --git a/arch/arm/dts/rk3288-tinker.dts b/arch/arm/dts/rk3288-tinker.dts
-index 4b8405fd82..338670123b 100644
---- a/arch/arm/dts/rk3288-tinker.dts
-+++ b/arch/arm/dts/rk3288-tinker.dts
-@@ -35,10 +35,3 @@
- 	vbus-supply = <&vcc5v0_host>;
- 	status = "okay";
- };
--
--&i2c2 {
--    m24c08@50 {
--        compatible = "at,24c08", "i2c-eeprom";
--        reg = <0x50>;
--    };
--};
--- 
-2.28.0
-

buildroot-external/board/asus/tinker/patches/uboot/0003-rockchip-dts-tinker-remove-unnecessary-node.patch

@@ -1,34 +0,0 @@
-From 07a02625ba95f68ba670b4c1cc98567acb390195 Mon Sep 17 00:00:00 2001
-Message-Id: <07a02625ba95f68ba670b4c1cc98567acb390195.1602103621.git.stefan@agner.ch>
-In-Reply-To: <cd1aac268ff58eea28153bbabfb33abc2df52b1f.1602103621.git.stefan@agner.ch>
-References: <cd1aac268ff58eea28153bbabfb33abc2df52b1f.1602103621.git.stefan@agner.ch>
-From: Stefan Agner <stefan@agner.ch>
-Date: Fri, 4 Sep 2020 15:44:38 +0200
-Subject: [PATCH 3/4] rockchip: dts: tinker: remove unnecessary node
-
-The property reg-shift with the same value is present in the base
-device tree already. Remove unnecessary node from rk3288-tinker.dts.
-
-Signed-off-by: Stefan Agner <stefan@agner.ch>
----
- arch/arm/dts/rk3288-tinker.dts | 4 ----
- 1 file changed, 4 deletions(-)
-
-diff --git a/arch/arm/dts/rk3288-tinker.dts b/arch/arm/dts/rk3288-tinker.dts
-index 338670123b..8b1848c310 100644
---- a/arch/arm/dts/rk3288-tinker.dts
-+++ b/arch/arm/dts/rk3288-tinker.dts
-@@ -27,10 +27,6 @@
- 	status = "okay";
- };
- 
--&uart2 {
--	reg-shift = <2>;
--};
--
- &usb_host1 {
- 	vbus-supply = <&vcc5v0_host>;
- 	status = "okay";
--- 
-2.28.0
-

buildroot-external/board/asus/tinker/uboot-boot.ush

@@ -23,14 +23,37 @@ setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=ap
 setenv bootargs_a "root=PARTUUID=8d3d53e3-6d49-4c38-8349-aff6859e82fd rootfstype=squashfs ro rootwait"
 setenv bootargs_b "root=PARTUUID=a3ec664e-32ce-4665-95ea-7ae90ce9aa20 rootfstype=squashfs ro rootwait"
 
+# Load environment from haos-config.txt
+if test -e mmc ${devnum}:1 haos-config.txt; then
+  fatload mmc ${devnum}:1 ${ramdisk_addr_r} haos-config.txt
+  env import -t ${ramdisk_addr_r} ${filesize}
+fi
+
 # Load extraargs
 fileenv mmc ${devnum}:1 ${ramdisk_addr_r} cmdline.txt cmdline
 
 # Load device tree
 if test "$devnum" = "0"; then
-  fatload mmc ${devnum}:1 ${fdt_addr_r} rk3288-tinker-s.dtb
+  setenv fdtfile "rk3288-tinker-s.dtb"
 else
-  fatload mmc ${devnum}:1 ${fdt_addr_r} rk3288-tinker.dtb
+  setenv fdtfile "rk3288-tinker.dtb"
+fi
+
+echo "Loading standard device tree ${fdtfile}"
+fatload mmc ${devnum}:1 ${fdt_addr_r} ${fdtfile}
+fdt addr ${fdt_addr_r}
+
+# load dt overlays
+fdt resize 65536
+for overlay_file in ${overlays}; do
+  if fatload mmc ${devnum}:1 ${ramdisk_addr_r} overlays/${overlay_file}.dtbo; then
+    echo "Applying kernel provided DT overlay ${overlay_file}.dtbo"
+    fdt apply ${ramdisk_addr_r} || setenv overlay_error "true"
+  fi
+done
+if test "${overlay_error}" = "true"; then
+  echo "Error applying DT overlays, restoring original DT"
+  fatload mmc ${devnum}:1 ${fdt_addr_r} ${fdtfile}
 fi
 
 setenv bootargs

buildroot-external/board/asus/tinker/uboot.config

@@ -1,2 +1,3 @@
 # CONFIG_USB_STORAGE is not set
 # CONFIG_DOS_PARTITION is not set
+CONFIG_OF_LIBFDT_OVERLAY=y

buildroot-external/board/hardkernel/odroid-c2/boot-env.txt

@@ -0,0 +1,2 @@
+# Uncomment this to enable GPIO support for RPI-RF-MOD/HM-MOD-RPI-PCB
+#overlays=rpi-rf-mod

buildroot-external/board/hardkernel/odroid-c2/hassos-hook.sh

@@ -10,6 +10,10 @@ function hassos_pre_image() {
     cp "${BINARIES_DIR}/boot.scr" "${BOOT_DATA}/boot.scr"
     cp "${BINARIES_DIR}/meson-gxbb-odroidc2.dtb" "${BOOT_DATA}/meson-gxbb-odroidc2.dtb"
 
+    mkdir -p "${BOOT_DATA}/overlays"
+    cp "${BINARIES_DIR}"/*.dtbo "${BOOT_DATA}/overlays/"
+    cp "${BOARD_DIR}/boot-env.txt" "${BOOT_DATA}/haos-config.txt"
+
     echo "console=tty0 console=ttyAML0,115200n8" > "${BOOT_DATA}/cmdline.txt"
 
     # SPL

buildroot-external/board/hardkernel/odroid-c2/uboot-boot.ush

@@ -25,9 +25,33 @@ setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=ap
 setenv bootargs_a "root=PARTUUID=48617373-06 rootfstype=squashfs ro rootwait"
 setenv bootargs_b "root=PARTUUID=48617373-08 rootfstype=squashfs ro rootwait"
 
+# Load environment from haos-config.txt
+if test -e mmc ${devnum}:1 haos-config.txt; then
+  fatload mmc ${devnum}:1 ${ramdisk_addr_r} haos-config.txt
+  env import -t ${ramdisk_addr_r} ${filesize}
+fi
+
 # Load extraargs
 fileenv mmc ${devnum}:1 ${ramdisk_addr_r} cmdline.txt cmdline
-fatload mmc ${devnum}:1 ${fdt_addr_r} meson-gxbb-odroidc2.dtb
+
+# Load device tree
+setenv fdtfile "meson-gxbb-odroidc2.dtb"
+echo "Loading standard device tree ${fdtfile}"
+fatload mmc ${devnum}:1 ${fdt_addr_r} ${fdtfile}
+fdt addr ${fdt_addr_r}
+
+# load dt overlays
+fdt resize 65536
+for overlay_file in ${overlays}; do
+  if fatload mmc ${devnum}:1 ${ramdisk_addr_r} overlays/${overlay_file}.dtbo; then
+    echo "Applying kernel provided DT overlay ${overlay_file}.dtbo"
+    fdt apply ${ramdisk_addr_r} || setenv overlay_error "true"
+  fi
+done
+if test "${overlay_error}" = "true"; then
+  echo "Error applying DT overlays, restoring original DT"
+  fatload mmc ${devnum}:1 ${fdt_addr_r} ${fdtfile}
+fi
 
 # logical volumes get numbered after physical ones.
 # 1. boot

buildroot-external/board/hardkernel/odroid-c4/boot-env.txt

@@ -0,0 +1,2 @@
+# Uncomment this to enable GPIO support for RPI-RF-MOD/HM-MOD-RPI-PCB
+#overlays=rpi-rf-mod

buildroot-external/board/hardkernel/odroid-c4/hassos-hook.sh

@@ -9,6 +9,10 @@ function hassos_pre_image() {
     cp "${BINARIES_DIR}/boot.scr" "${BOOT_DATA}/boot.scr"
     cp "${BINARIES_DIR}/meson-sm1-odroid-c4.dtb" "${BOOT_DATA}/meson-sm1-odroid-c4.dtb"
 
+    mkdir -p "${BOOT_DATA}/overlays"
+    cp "${BINARIES_DIR}"/*.dtbo "${BOOT_DATA}/overlays/"
+    cp "${BOARD_DIR}/boot-env.txt" "${BOOT_DATA}/haos-config.txt"
+
     echo "console=tty0 console=ttyAML0,115200n8" > "${BOOT_DATA}/cmdline.txt"
 
     # SPL

buildroot-external/board/hardkernel/odroid-c4/uboot-boot.ush

@@ -25,9 +25,33 @@ setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=ap
 setenv bootargs_a "root=PARTUUID=48617373-06 rootfstype=squashfs ro rootwait"
 setenv bootargs_b "root=PARTUUID=48617373-08 rootfstype=squashfs ro rootwait"
 
+# Load environment from haos-config.txt
+if test -e mmc ${devnum}:1 haos-config.txt; then
+  fatload mmc ${devnum}:1 ${ramdisk_addr_r} haos-config.txt
+  env import -t ${ramdisk_addr_r} ${filesize}
+fi
+
 # Load extraargs
 fileenv mmc ${devnum}:1 ${ramdisk_addr_r} cmdline.txt cmdline
-fatload mmc ${devnum}:1 ${fdt_addr_r} meson-sm1-odroid-c4.dtb
+
+# Load device tree
+setenv fdtfile "meson-sm1-odroid-c4.dtb"
+echo "Loading standard device tree ${fdtfile}"
+fatload mmc ${devnum}:1 ${fdt_addr_r} ${fdtfile}
+fdt addr ${fdt_addr_r}
+
+# load dt overlays
+fdt resize 65536
+for overlay_file in ${overlays}; do
+  if fatload mmc ${devnum}:1 ${ramdisk_addr_r} overlays/${overlay_file}.dtbo; then
+    echo "Applying kernel provided DT overlay ${overlay_file}.dtbo"
+    fdt apply ${ramdisk_addr_r} || setenv overlay_error "true"
+  fi
+done
+if test "${overlay_error}" = "true"; then
+  echo "Error applying DT overlays, restoring original DT"
+  fatload mmc ${devnum}:1 ${fdt_addr_r} ${fdtfile}
+fi
 
 # logical volumes get numbered after physical ones.
 # 1. boot

buildroot-external/board/hardkernel/odroid-n2/boot-env.txt

@@ -0,0 +1,2 @@
+# Uncomment this to enable GPIO support for RPI-RF-MOD/HM-MOD-RPI-PCB
+#overlays=rpi-rf-mod

buildroot-external/board/hardkernel/odroid-n2/hassos-hook.sh

@@ -9,6 +9,10 @@ function hassos_pre_image() {
     cp "${BINARIES_DIR}/boot.scr" "${BOOT_DATA}/boot.scr"
     cp "${BINARIES_DIR}"/*.dtb "${BOOT_DATA}/"
 
+    mkdir -p "${BOOT_DATA}/overlays"
+    cp "${BINARIES_DIR}"/*.dtbo "${BOOT_DATA}/overlays/"
+    cp "${BOARD_DIR}/boot-env.txt" "${BOOT_DATA}/haos-config.txt"
+
     echo "console=tty0 console=ttyAML0,115200n8" > "${BOOT_DATA}/cmdline.txt"
 
     # SPL

buildroot-external/board/hardkernel/odroid-n2/kernel.config

@@ -1 +1,7 @@
 CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+
+CONFIG_THERMAL_GOV_BANG_BANG=y
+CONFIG_SENSORS_GPIO_FAN=y
+
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_GPIO_POLLED=y

buildroot-external/board/hardkernel/odroid-n2/uboot-boot.ush

@@ -25,12 +25,37 @@ setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=ap
 setenv bootargs_a "root=PARTUUID=48617373-06 rootfstype=squashfs ro rootwait"
 setenv bootargs_b "root=PARTUUID=48617373-08 rootfstype=squashfs ro rootwait"
 
+# Load environment from haos-config.txt
+if test -e mmc ${devnum}:1 haos-config.txt; then
+  fatload mmc ${devnum}:1 ${ramdisk_addr_r} haos-config.txt
+  env import -t ${ramdisk_addr_r} ${filesize}
+fi
+
 # Load extraargs
 fileenv mmc ${devnum}:1 ${ramdisk_addr_r} cmdline.txt cmdline
-if test "${board_rev}" = "c"; then
-  fatload mmc ${devnum}:1 ${fdt_addr_r} meson-g12b-odroid-n2-plus.dtb
+
+# Load device tree
+if test "${soc_rev}" = "c"; then
+  setenv fdtfile "meson-g12b-odroid-n2-plus.dtb"
 else
-  fatload mmc ${devnum}:1 ${fdt_addr_r} meson-g12b-odroid-n2.dtb
+  setenv fdtfile "meson-g12b-odroid-n2.dtb"
+fi
+
+echo "Loading standard device tree ${fdtfile}"
+fatload mmc ${devnum}:1 ${fdt_addr_r} ${fdtfile}
+fdt addr ${fdt_addr_r}
+
+# load dt overlays
+fdt resize 65536
+for overlay_file in ${overlays}; do
+  if fatload mmc ${devnum}:1 ${ramdisk_addr_r} overlays/${overlay_file}.dtbo; then
+    echo "Applying kernel provided DT overlay ${overlay_file}.dtbo"
+    fdt apply ${ramdisk_addr_r} || setenv overlay_error "true"
+  fi
+done
+if test "${overlay_error}" = "true"; then
+  echo "Error applying DT overlays, restoring original DT"
+  fatload mmc ${devnum}:1 ${fdt_addr_r} ${fdtfile}
 fi
 
 # logical volumes get numbered after physical ones.

buildroot-external/board/hardkernel/odroid-n2/uboot.config

@@ -2,3 +2,4 @@ CONFIG_DOS_PARTITION=y
 # CONFIG_EFI_PARTITION is not set
 # CONFIG_USB_STORAGE is not set
 CONFIG_DISPLAY_BOARDINFO=y
+CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y

buildroot-external/board/hardkernel/odroid-xu4/patches/linux/0001-ODROID-XU4-Update-hack-avoiding-the-invalid-temperat.patch

@@ -0,0 +1,61 @@
+From d6b82edb420c7df4fa8bb0924dae2476beb649a2 Mon Sep 17 00:00:00 2001
+Message-Id: <d6b82edb420c7df4fa8bb0924dae2476beb649a2.1622398359.git.stefan@agner.ch>
+From: "charles.park" <charles.park@hardkernel.com>
+Date: Fri, 1 Jun 2018 18:12:01 +0900
+Subject: [PATCH] ODROID-XU4: Update hack avoiding the invalid temperature by
+ TMU broken
+
+Change-Id: I6092834427950a50746535458e99bf7089212044
+---
+ drivers/thermal/thermal_helpers.c | 28 ++++++++++++++++++++++++++++
+ 1 file changed, 28 insertions(+)
+
+diff --git a/drivers/thermal/thermal_helpers.c b/drivers/thermal/thermal_helpers.c
+index c94bc824e5d3..2880126c5861 100644
+--- a/drivers/thermal/thermal_helpers.c
++++ b/drivers/thermal/thermal_helpers.c
+@@ -75,6 +75,10 @@ EXPORT_SYMBOL(get_thermal_instance);
+  *
+  * Return: On success returns 0, an error code otherwise
+  */
++
++#define	CRITICAL_TEMP	120000
++int thermal_zone_data[4] = { 0, };
++
+ int thermal_zone_get_temp(struct thermal_zone_device *tz, int *temp)
+ {
+ 	int ret = -EINVAL;
+@@ -108,6 +112,30 @@ int thermal_zone_get_temp(struct thermal_zone_device *tz, int *temp)
+ 			*temp = tz->emul_temperature;
+ 	}
+ 
++	/* save thermal_zone data */
++	if (!ret)
++		thermal_zone_data[tz->id] = *temp;
++	/*
++	 * This case is that the thermal sensor is broken.
++	 * That's not real temperature. Set the fake temperature value in order to
++	 * avoid reaching the ciritical temperature.
++	 */
++	if ((thermal_zone_data[tz->id] > CRITICAL_TEMP) && (tz->id != 4)) {
++		int i, broken_sensor = 0, correct_temp = 0;
++		for (i = 0; i < 4; i++) {
++			if ((thermal_zone_data[i] <= CRITICAL_TEMP) &&
++			    (correct_temp <= thermal_zone_data[i]))
++				correct_temp = thermal_zone_data[i];
++			if (thermal_zone_data[i] > CRITICAL_TEMP)
++				broken_sensor++;
++		}
++		/*
++		 * if all thermal sensor broken then critical temperature data send
++		 * for system poweroff.
++		 */
++		*temp = (broken_sensor == 4) ? CRITICAL_TEMP : correct_temp;
++	}
++
+ 	mutex_unlock(&tz->lock);
+ exit:
+ 	return ret;
+-- 
+2.31.1
+

buildroot-external/board/hardkernel/patches/linux/0004-arm64-dts-meson-odroid-n2-plus-fix-vddcpu_a-pwm.patch

@@ -1,42 +0,0 @@
-From 47f804dc970e2b1f71f1f032a0da2ef3b8315be0 Mon Sep 17 00:00:00 2001
-Message-Id: <47f804dc970e2b1f71f1f032a0da2ef3b8315be0.1606829302.git.stefan@agner.ch>
-In-Reply-To: <9d2a2b44e67b0ef49e534c097e8b5e3e1173b033.1606829302.git.stefan@agner.ch>
-References: <9d2a2b44e67b0ef49e534c097e8b5e3e1173b033.1606829302.git.stefan@agner.ch>
-From: Jerome Brunet <jbrunet@baylibre.com>
-Date: Fri, 23 Oct 2020 11:41:39 +0200
-Subject: [PATCH 4/7] arm64: dts: meson: odroid-n2 plus: fix vddcpu_a pwm
-
-On the odroid N2 plus, cpufreq is not available due to an error on the cpu
-regulators. vddcpu a and b get the same PWM. The one provided to vddcpu A
-is incorrect. Because vddcpu B PWM is busy the regulator cannot register:
-
-> pwm-regulator regulator-vddcpu-b: Failed to get PWM: -16
-
-Like on the odroid n2, use PWM A out of GPIOE_2 for vddcpu A to fix the
-problem
-
-Fixes: 98d24896ee11 ("arm64: dts: meson: add support for the ODROID-N2+")
-Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
-Acked-by: Neil Armstrong <narmstrong@baylibre.com>
-Signed-off-by: Kevin Hilman <khilman@baylibre.com>
-Link: https://lore.kernel.org/r/20201023094139.809379-1-jbrunet@baylibre.com
----
- arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2-plus.dts | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2-plus.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2-plus.dts
-index 5de2815ba99d..ce1198ad34e4 100644
---- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2-plus.dts
-+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2-plus.dts
-@@ -19,7 +19,7 @@ &vddcpu_a {
- 	regulator-min-microvolt = <680000>;
- 	regulator-max-microvolt = <1040000>;
- 
--	pwms = <&pwm_AO_cd 1 1500 0>;
-+	pwms = <&pwm_ab 0 1500 0>;
- };
- 
- &vddcpu_b {
--- 
-2.29.2
-

buildroot-external/board/hardkernel/patches/linux/0005-arm64-dts-meson-add-RTC-to-ODROID-N2-boards.patch

@@ -1,52 +0,0 @@
-From 2c15ad491233a80d61c811a944b86067e2e74686 Mon Sep 17 00:00:00 2001
-Message-Id: <2c15ad491233a80d61c811a944b86067e2e74686.1606829302.git.stefan@agner.ch>
-In-Reply-To: <9d2a2b44e67b0ef49e534c097e8b5e3e1173b033.1606829302.git.stefan@agner.ch>
-References: <9d2a2b44e67b0ef49e534c097e8b5e3e1173b033.1606829302.git.stefan@agner.ch>
-From: Stefan Agner <stefan@agner.ch>
-Date: Mon, 16 Nov 2020 23:11:02 +0100
-Subject: [PATCH 5/7] arm64: dts: meson: add RTC to ODROID-N2 boards
-
-All ODROID-N2 boards come with a NXP PCF8563TS RTC connected to I2C bus
-3. This is the RTC which is connected to the on-board RTC backup battery.
-Use it as primary RTC.
-
-Signed-off-by: Stefan Agner <stefan@agner.ch>
----
- .../boot/dts/amlogic/meson-g12b-odroid-n2.dtsi     | 14 ++++++++++++++
- 1 file changed, 14 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-index 6982632ae646..40390feba053 100644
---- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-@@ -13,6 +13,8 @@ / {
- 	aliases {
- 		serial0 = &uart_AO;
- 		ethernet0 = &ethmac;
-+		rtc0 = &board_rtc;
-+		rtc1 = &vrtc;
- 	};
- 
- 	dioo2133: audio-amplifier-0 {
-@@ -471,6 +473,18 @@ hdmi_tx_tmds_out: endpoint {
- 	};
- };
- 
-+&i2c3 {
-+	status = "okay";
-+	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
-+	pinctrl-names = "default";
-+	clock-frequency = <400000>;
-+
-+	board_rtc: rtc@51 {
-+		compatible = "nxp,pcf8563";
-+		reg = <0x51>;
-+	};
-+};
-+
- &ir {
- 	status = "okay";
- 	pinctrl-0 = <&remote_input_ao_pins>;
--- 
-2.29.2
-

buildroot-external/board/hardkernel/patches/linux/0006-arm64-dts-meson-g12b-odroid-n2-fix-PHY-deassert-timi.patch

@@ -1,41 +0,0 @@
-From 35d2de7b27bc3f4bc2d977fb6b7671d9ba889496 Mon Sep 17 00:00:00 2001
-Message-Id: <35d2de7b27bc3f4bc2d977fb6b7671d9ba889496.1606829302.git.stefan@agner.ch>
-In-Reply-To: <9d2a2b44e67b0ef49e534c097e8b5e3e1173b033.1606829302.git.stefan@agner.ch>
-References: <9d2a2b44e67b0ef49e534c097e8b5e3e1173b033.1606829302.git.stefan@agner.ch>
-From: Stefan Agner <stefan@agner.ch>
-Date: Tue, 1 Dec 2020 00:32:23 +0100
-Subject: [PATCH 6/7] arm64: dts: meson: g12b: odroid-n2: fix PHY deassert
- timing requirements
-
-According to the datasheet (Rev. 1.9) the RTL8211F requires at least
-72ms "for internal circuits settling time" before accessing the PHY
-egisters. This fixes an issue where the Ethernet link doesn't come up
-when using ip link set down/up:
-  [   29.360965] meson8b-dwmac ff3f0000.ethernet eth0: Link is Down
-  [   34.569012] meson8b-dwmac ff3f0000.ethernet eth0: PHY [0.0:00] driver [RTL8211F Gigabit Ethernet] (irq=31)
-  [   34.676732] meson8b-dwmac ff3f0000.ethernet: Failed to reset the dma
-  [   34.678874] meson8b-dwmac ff3f0000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
-  [   34.687850] meson8b-dwmac ff3f0000.ethernet eth0: stmmac_open: Hw setup failed
-
-Fixes: 658e4129bb81 ("arm64: dts: meson: g12b: odroid-n2: add the Ethernet PHY reset line")
-Signed-off-by: Stefan Agner <stefan@agner.ch>
----
- arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-index 40390feba053..445d90d25aa3 100644
---- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-@@ -415,7 +415,7 @@ external_phy: ethernet-phy@0 {
- 		max-speed = <1000>;
- 
- 		reset-assert-us = <10000>;
--		reset-deassert-us = <30000>;
-+		reset-deassert-us = <80000>;
- 		reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
- 
- 		interrupt-parent = <&gpio_intc>;
--- 
-2.29.2
-

buildroot-external/board/hardkernel/patches/linux/0007-arm64-dts-meson-fix-PHY-deassert-timing-requirements.patch

@@ -1,152 +0,0 @@
-From 40e8e7e28c44993e352195b359c4d4540bfb2105 Mon Sep 17 00:00:00 2001
-Message-Id: <40e8e7e28c44993e352195b359c4d4540bfb2105.1606829302.git.stefan@agner.ch>
-In-Reply-To: <9d2a2b44e67b0ef49e534c097e8b5e3e1173b033.1606829302.git.stefan@agner.ch>
-References: <9d2a2b44e67b0ef49e534c097e8b5e3e1173b033.1606829302.git.stefan@agner.ch>
-From: Stefan Agner <stefan@agner.ch>
-Date: Tue, 1 Dec 2020 00:32:23 +0100
-Subject: [PATCH 7/7] arm64: dts: meson: fix PHY deassert timing requirements
-
-According to the datasheet (Rev. 1.9) the RTL8211F requires at least
-72ms "for internal circuits settling time" before accessing the PHY
-egisters. This fixes an issue seen on ODROID-C2 where the Ethernet
-link doesn't come up when using ip link set down/up:
-  [ 6630.714855] meson8b-dwmac c9410000.ethernet eth0: Link is Down
-  [ 6630.785775] meson8b-dwmac c9410000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211F Gigabit Ethernet] (irq=36)
-  [ 6630.893071] meson8b-dwmac c9410000.ethernet: Failed to reset the dma
-  [ 6630.893800] meson8b-dwmac c9410000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
-  [ 6630.902835] meson8b-dwmac c9410000.ethernet eth0: stmmac_open: Hw setup failed
-
-Fixes: f29cabf240ed ("arm64: dts: meson: use the generic Ethernet PHY reset GPIO bindings")
-Signed-off-by: Stefan Agner <stefan@agner.ch>
----
- arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts  | 2 +-
- arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts   | 2 +-
- arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi  | 2 +-
- arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi     | 2 +-
- arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts  | 2 +-
- arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts | 2 +-
- arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts   | 2 +-
- arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts        | 2 +-
- arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts    | 2 +-
- 9 files changed, 9 insertions(+), 9 deletions(-)
-
-diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
-index 7be3e354093b..de27beafe9db 100644
---- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
-+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
-@@ -165,7 +165,7 @@ eth_phy0: ethernet-phy@0 {
- 			reg = <0>;
- 
- 			reset-assert-us = <10000>;
--			reset-deassert-us = <30000>;
-+			reset-deassert-us = <80000>;
- 			reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
- 
- 			interrupt-parent = <&gpio_intc>;
-diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
-index 70fcfb7b0683..50de1d01e565 100644
---- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
-+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
-@@ -200,7 +200,7 @@ eth_phy0: ethernet-phy@0 {
- 			reg = <0>;
- 
- 			reset-assert-us = <10000>;
--			reset-deassert-us = <30000>;
-+			reset-deassert-us = <80000>;
- 			reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
- 
- 			interrupt-parent = <&gpio_intc>;
-diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
-index 222ee8069cfa..9b0b81f191f1 100644
---- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
-+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
-@@ -126,7 +126,7 @@ eth_phy0: ethernet-phy@0 {
- 			reg = <0>;
- 
- 			reset-assert-us = <10000>;
--			reset-deassert-us = <30000>;
-+			reset-deassert-us = <80000>;
- 			reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
- 
- 			interrupt-parent = <&gpio_intc>;
-diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
-index ad812854a107..a350fee1264d 100644
---- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
-+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
-@@ -147,7 +147,7 @@ eth_phy0: ethernet-phy@0 {
- 			reg = <0>;
- 
- 			reset-assert-us = <10000>;
--			reset-deassert-us = <30000>;
-+			reset-deassert-us = <80000>;
- 			reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
- 
- 			interrupt-parent = <&gpio_intc>;
-diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
-index b08c4537f260..b2ab05c22090 100644
---- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
-+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
-@@ -82,7 +82,7 @@ external_phy: ethernet-phy@0 {
- 
- 		/* External PHY reset is shared with internal PHY Led signal */
- 		reset-assert-us = <10000>;
--		reset-deassert-us = <30000>;
-+		reset-deassert-us = <80000>;
- 		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
- 
- 		interrupt-parent = <&gpio_intc>;
-diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
-index bff8ec2c1c70..e38d9e50caa7 100644
---- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
-+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
-@@ -194,7 +194,7 @@ external_phy: ethernet-phy@0 {
- 		reg = <0>;
- 
- 		reset-assert-us = <10000>;
--		reset-deassert-us = <30000>;
-+		reset-deassert-us = <80000>;
- 		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
- 
- 		interrupt-parent = <&gpio_intc>;
-diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
-index 83eca3af44ce..dfa7a37a1281 100644
---- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
-+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
-@@ -112,7 +112,7 @@ external_phy: ethernet-phy@0 {
- 		max-speed = <1000>;
- 
- 		reset-assert-us = <10000>;
--		reset-deassert-us = <30000>;
-+		reset-deassert-us = <80000>;
- 		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
- 	};
- };
-diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts
-index ea45ae0c71b7..8edbfe040805 100644
---- a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts
-+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts
-@@ -64,7 +64,7 @@ external_phy: ethernet-phy@0 {
- 
- 		/* External PHY reset is shared with internal PHY Led signal */
- 		reset-assert-us = <10000>;
--		reset-deassert-us = <30000>;
-+		reset-deassert-us = <80000>;
- 		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
- 
- 		interrupt-parent = <&gpio_intc>;
-diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
-index c89c9f846fb1..dde7cfe12cff 100644
---- a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
-+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
-@@ -114,7 +114,7 @@ external_phy: ethernet-phy@0 {
- 		max-speed = <1000>;
- 
- 		reset-assert-us = <10000>;
--		reset-deassert-us = <30000>;
-+		reset-deassert-us = <80000>;
- 		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
- 	};
- };
--- 
-2.29.2
-

buildroot-external/board/hardkernel/patches/linux/5.10.45/board-odroidc2-add-uartA-uartC.patch

@@ -0,0 +1,32 @@
+diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+index 1cc9dc6..9f48dff 100644
+--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
++++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+@@ -16,6 +16,8 @@
+ 
+ 	aliases {
+ 		serial0 = &uart_AO;
++		serial1 = &uart_A;
++		serial2 = &uart_C;
+ 		ethernet0 = &ethmac;
+ 	};
+ 
+@@ -290,6 +355,18 @@
+ 	pinctrl-names = "default";
+ };
+ 
++&uart_A {
++	status = "disabled";
++	pinctrl-0 = <&uart_a_pins>;
++	pinctrl-names = "default";
++};
++
++&uart_C {
++	status = "disabled";
++	pinctrl-0 = <&uart_c_pins>;
++	pinctrl-names = "default";
++};
++
+ &usb0_phy {
+ 	status = "okay";
+ 	phy-supply = <&usb_otg_pwr>;

buildroot-external/board/hardkernel/patches/linux/5.10.45/general-meson64-i2cX-missing-pins.patch

@@ -0,0 +1,22 @@
+diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+index 98cbba6..48ca119 100644
+--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
++++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+@@ -321,6 +322,8 @@
+ 
+ &i2c_A {
+ 	clocks = <&clkc CLKID_I2C>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&i2c_a_pins>;
+ };
+ 
+ &i2c_AO {
+@@ -329,6 +332,8 @@
+ 
+ &i2c_B {
+ 	clocks = <&clkc CLKID_I2C>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&i2c_b_pins>;
+ };
+ 
+ &i2c_C {

buildroot-external/board/hardkernel/patches/linux/5.10.45/hardkernel-0013-C4-arm64-dts-add-uart_A-node.patch

@@ -0,0 +1,41 @@
+From ca89096189299862a7b2b3123d96fc8bfbe74ce3 Mon Sep 17 00:00:00 2001
+From: Hyeonki Hong <hhk7734@gmail.com>
+Date: Tue, 14 Apr 2020 14:15:25 +0900
+Subject: [PATCH 13/74] ODROID-C4: arm64/dts: add uart_A node
+
+Change-Id: Ib66a03da2fcf39fc459c20c9f98b1baca34dcf5b
+---
+ arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts | 9 ++++++++-
+ 1 file changed, 8 insertions(+), 1 deletion(-)
+
+diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
+index 1b749bd340ce..e5d73598c131 100644
+--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
++++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
+@@ -14,8 +14,9 @@ / {
+ 	model = "Hardkernel ODROID-C4";
+ 
+ 	aliases {
+-		serial0 = &uart_AO;
+ 		ethernet0 = &ethmac;
++		serial0 = &uart_AO;
++		serial1 = &uart_A;
+ 	};
+ 
+ 	chosen {
+@@ -385,6 +386,12 @@ &sd_emmc_c {
+ 	vqmmc-supply = <&flash_1v8>;
+ };
+ 
++&uart_A {
++	status = "okay";
++	pinctrl-names = "default";
++	pinctrl-0 = <&uart_a_pins>;
++};
++
+ &uart_AO {
+ 	status = "okay";
+ 	pinctrl-0 = <&uart_ao_a_pins>;
+-- 
+2.25.1
+

buildroot-external/board/hardkernel/patches/linux/5.10.45/hardkernel-0021-C4-arm64-dts-add-i2c2-i2c3-node.patch

@@ -0,0 +1,85 @@
+From 400645dd70ae5a0efbbce35067c8674d380ed2a7 Mon Sep 17 00:00:00 2001
+From: Hyeonki Hong <hhk7734@gmail.com>
+Date: Wed, 13 May 2020 10:37:28 +0900
+Subject: [PATCH 21/74] ODROID-C4: arm64/dts: add i2c2, i2c3 node
+
+Change-Id: Id75f935111744ff6945791deefef20f897dc98ac
+(cherry picked from commit 3f4b2ffd0905946175c478baa65361695e78e0de)
+---
+ .../boot/dts/amlogic/meson-sm1-odroid-c4.dts  | 53 +++++++++++++++++++
+ 1 file changed, 53 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
+index 831053aa6dff..5988dc5f34d0 100644
+--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
++++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
+@@ -16,6 +16,8 @@ / {
+ 
+ 	aliases {
+ 		ethernet0 = &ethmac;
++		i2c0 = &i2c2;
++		i2c1 = &i2c3;
+ 		serial0 = &uart_AO;
+ 		serial1 = &uart_A;
+ 		spi0 = &spicc0;
+@@ -434,6 +436,57 @@ &ir {
+ 	linux,rc-map-name = "rc-odroid";
+ };
+ 
++&i2c2 {
++	status = "okay";
++
++	/*
++	 * 40 Pin Header : SDA(GPIOX.17->3 Pin)
++	 *		   SCL(GPIOX.18->5 Pin)
++	 */
++	pinctrl-names = "default";
++	pinctrl-0 = <&i2c2_master_pins1>;
++
++	/* default 400k */
++	clock-frequency = <400000>;
++};
++
++&i2c3 {
++	/* default i2c clock-frequency is 100Khz */
++	status = "okay";
++
++	/*
++	 * 40 Pin Header : SDA(GPIOA.14->27 Pin)
++	 *		   SCL(GPIOA.15->28 Pin)
++	 */
++	pinctrl-names = "default";
++	pinctrl-0 = <&i2c3_master_pins2>;
++
++	/* default 100k */
++	clock-frequency = <100000>;
++};
++
++&periphs_pinctrl {
++	i2c2_master_pins1: i2c2-master-pins1 {
++		mux {
++			groups = "i2c2_sda_x",
++				"i2c2_sck_x";
++			function = "i2c2";
++			bias-pull-up;
++			drive-strength-microamp = <3000>;
++		};
++	};
++
++	i2c3_master_pins2: i2c3-master-pins2 {
++		mux {
++			groups = "i2c3_sda_a",
++				"i2c3_sck_a";
++			function = "i2c3";
++			bias-pull-up;
++			drive-strength-microamp = <3000>;
++		};
++	};
++};
++
+ &pwm_AO_cd {
+ 	pinctrl-0 = <&pwm_ao_d_e_pins>;
+ 	pinctrl-names = "default";
+-- 
+2.25.1
+

buildroot-external/board/hardkernel/patches/linux/5.9.16/0001-arm64-dts-meson-convert-ODROID-N2-to-dtsi.patch

@@ -1,8 +1,8 @@
-From 9d2a2b44e67b0ef49e534c097e8b5e3e1173b033 Mon Sep 17 00:00:00 2001
-Message-Id: <9d2a2b44e67b0ef49e534c097e8b5e3e1173b033.1606829302.git.stefan@agner.ch>
+From 0955f7e64f302c5c331b90fd07fc48dfb677eab5 Mon Sep 17 00:00:00 2001
+Message-Id: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agner.ch>
 From: Christian Hewitt <christianshewitt@gmail.com>
 Date: Tue, 15 Sep 2020 17:24:30 +0200
-Subject: [PATCH 1/7] arm64: dts: meson: convert ODROID-N2 to dtsi
+Subject: [PATCH 01/11] arm64: dts: meson: convert ODROID-N2 to dtsi
 
 Convert the current ODROID-N2 dts into a common dtsi in preparation
 for adding ODROID-N2+ support.
@@ -13,6 +13,7 @@ Signed-off-by: Kevin Hilman <khilman@baylibre.com>
 Acked-by: Neil Armstrong <narmstrong@baylibre.com>
 Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
 Link: https://lore.kernel.org/r/20200915152432.30616-2-narmstrong@baylibre.com
+(cherry picked from commit ef599f5f3e10bf1979d8ece29fd7fa511fedd59d)
 ---
  .../boot/dts/amlogic/meson-g12b-odroid-n2.dts | 618 +----------------
  .../dts/amlogic/meson-g12b-odroid-n2.dtsi     | 625 ++++++++++++++++++
@@ -1282,5 +1283,5 @@ index 000000000000..6982632ae646
 +	phy-supply = <&hub_5v>;
 +};
 -- 
-2.29.2
+2.31.1
 

buildroot-external/board/hardkernel/patches/linux/5.9.16/0002-dt-bindings-arm-amlogic-add-support-for-the-ODROID-N.patch

@@ -1,10 +1,11 @@
-From 258f03fa4fd897a61b5861df1f809e234711dd49 Mon Sep 17 00:00:00 2001
-Message-Id: <258f03fa4fd897a61b5861df1f809e234711dd49.1606829302.git.stefan@agner.ch>
-In-Reply-To: <9d2a2b44e67b0ef49e534c097e8b5e3e1173b033.1606829302.git.stefan@agner.ch>
-References: <9d2a2b44e67b0ef49e534c097e8b5e3e1173b033.1606829302.git.stefan@agner.ch>
+From a189f6229a9462ae2fc406b1e45286d2eea32b40 Mon Sep 17 00:00:00 2001
+Message-Id: <a189f6229a9462ae2fc406b1e45286d2eea32b40.1622055679.git.stefan@agner.ch>
+In-Reply-To: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agner.ch>
+References: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agner.ch>
 From: Christian Hewitt <christianshewitt@gmail.com>
 Date: Tue, 15 Sep 2020 17:24:31 +0200
-Subject: [PATCH 2/7] dt-bindings: arm: amlogic: add support for the ODROID-N2+
+Subject: [PATCH 02/11] dt-bindings: arm: amlogic: add support for the
+ ODROID-N2+
 
 HardKernel ODROID-N2+ uses a revised Amlogic S922X v2 chip that supports
 higher cpu clock speeds than the original ODROID-N2.
@@ -15,6 +16,7 @@ Signed-off-by: Kevin Hilman <khilman@baylibre.com>
 Acked-by: Rob Herring <robh@kernel.org>
 Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
 Link: https://lore.kernel.org/r/20200915152432.30616-3-narmstrong@baylibre.com
+(cherry picked from commit 88ba71cdc5497390350c87e68ce35688e88be3e8)
 ---
  Documentation/devicetree/bindings/arm/amlogic.yaml | 1 +
  1 file changed, 1 insertion(+)
@@ -32,5 +34,5 @@ index 5eba9f48823e..12ba8d074370 100644
                - ugoos,am6
            - const: amlogic,s922x
 -- 
-2.29.2
+2.31.1
 

buildroot-external/board/hardkernel/patches/linux/5.9.16/0003-arm64-dts-meson-add-support-for-the-ODROID-N2.patch

@@ -1,10 +1,10 @@
-From 6cfaddae585e5a87c5253c932b8d58e153159f6b Mon Sep 17 00:00:00 2001
-Message-Id: <6cfaddae585e5a87c5253c932b8d58e153159f6b.1606829302.git.stefan@agner.ch>
-In-Reply-To: <9d2a2b44e67b0ef49e534c097e8b5e3e1173b033.1606829302.git.stefan@agner.ch>
-References: <9d2a2b44e67b0ef49e534c097e8b5e3e1173b033.1606829302.git.stefan@agner.ch>
+From 2f09401241a0f2348d3e30617e89a00c1dc45895 Mon Sep 17 00:00:00 2001
+Message-Id: <2f09401241a0f2348d3e30617e89a00c1dc45895.1622055679.git.stefan@agner.ch>
+In-Reply-To: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agner.ch>
+References: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agner.ch>
 From: Christian Hewitt <christianshewitt@gmail.com>
 Date: Tue, 15 Sep 2020 17:24:32 +0200
-Subject: [PATCH 3/7] arm64: dts: meson: add support for the ODROID-N2+
+Subject: [PATCH 03/11] arm64: dts: meson: add support for the ODROID-N2+
 
 HardKernel ODROID-N2+ uses an Amlogic S922X rev. C chip capable of higher
 clock speeds than the original ODROID-N2.
@@ -18,6 +18,7 @@ Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
 Signed-off-by: Kevin Hilman <khilman@baylibre.com>
 Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
 Link: https://lore.kernel.org/r/20200915152432.30616-4-narmstrong@baylibre.com
+(cherry picked from commit 98d24896ee117b1f0969405476c943e9307e30d4)
 ---
  arch/arm64/boot/dts/amlogic/Makefile          |  1 +
  .../dts/amlogic/meson-g12b-odroid-n2-plus.dts | 31 +++++++++++++++++++
@@ -74,5 +75,5 @@ index 000000000000..5de2815ba99d
 +};
 +
 -- 
-2.29.2
+2.31.1
 

buildroot-external/board/hardkernel/patches/linux/5.9.16/0004-arm64-dts-meson-add-i2c3-rtc-nodes-and-rtc-aliases-t.patch

@@ -0,0 +1,55 @@
+From 7dba042e7863dc61ec74c0759493264e48d32df2 Mon Sep 17 00:00:00 2001
+Message-Id: <7dba042e7863dc61ec74c0759493264e48d32df2.1622055679.git.stefan@agner.ch>
+In-Reply-To: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agner.ch>
+References: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agner.ch>
+From: Christian Hewitt <christianshewitt@gmail.com>
+Date: Mon, 11 Jan 2021 13:58:31 +0000
+Subject: [PATCH 04/11] arm64: dts: meson: add i2c3/rtc nodes and rtc aliases
+ to ODROID-N2 dtsi
+
+Enable the onboard pcf8563 rtc hardware on ODROID N2/N2+ boards via the
+common dtsi. Also add aliases to ensure vrtc does not claim /dev/rtc0.
+
+Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
+Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
+Signed-off-by: Kevin Hilman <khilman@baylibre.com>
+Link: https://lore.kernel.org/r/20210111135831.2218-1-christianshewitt@gmail.com
+---
+ .../boot/dts/amlogic/meson-g12b-odroid-n2.dtsi     | 14 ++++++++++++++
+ 1 file changed, 14 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+index 6982632ae646..5927c4493f5a 100644
+--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
++++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+@@ -13,6 +13,8 @@ / {
+ 	aliases {
+ 		serial0 = &uart_AO;
+ 		ethernet0 = &ethmac;
++		rtc0 = &rtc;
++		rtc1 = &vrtc;
+ 	};
+ 
+ 	dioo2133: audio-amplifier-0 {
+@@ -478,6 +480,18 @@ &ir {
+ 	linux,rc-map-name = "rc-odroid";
+ };
+ 
++&i2c3 {
++	status = "okay";
++	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
++	pinctrl-names = "default";
++
++	rtc: rtc@51 {
++		compatible = "nxp,pcf8563";
++		reg = <0x51>;
++		wakeup-source;
++	};
++};
++
+ &pwm_ab {
+ 	pinctrl-0 = <&pwm_a_e_pins>;
+ 	pinctrl-names = "default";
+-- 
+2.31.1
+

buildroot-external/board/hardkernel/patches/linux/5.9.16/0005-arm64-dts-meson-add-saradc-node-to-ODROID-N2-N2.patch

@@ -0,0 +1,37 @@
+From 3f2aecc668b172e0c91bf1bfdc78ee18a6bb6645 Mon Sep 17 00:00:00 2001
+Message-Id: <3f2aecc668b172e0c91bf1bfdc78ee18a6bb6645.1622055679.git.stefan@agner.ch>
+In-Reply-To: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agner.ch>
+References: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agner.ch>
+From: Hyeonki Hong <hhk7734@gmail.com>
+Date: Wed, 7 Apr 2021 04:26:08 +0000
+Subject: [PATCH 05/11] arm64: dts: meson: add saradc node to ODROID N2/N2+
+
+Add the meson saradc node to the ODROID N2/N2+ common dtsi.
+
+Signed-off-by: Hyeonki Hong <hhk7734@gmail.com>
+Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
+Signed-off-by: Kevin Hilman <khilman@baylibre.com>
+Link: https://lore.kernel.org/r/20210407042609.9736-3-christianshewitt@gmail.com
+---
+ arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 5 +++++
+ 1 file changed, 5 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+index 5927c4493f5a..194a437b4e3f 100644
+--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
++++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+@@ -508,6 +508,11 @@ &pwm_AO_cd {
+ 	status = "okay";
+ };
+ 
++&saradc {
++	status = "okay";
++	vref-supply = <&vddao_1v8>;
++};
++
+ /* SD card */
+ &sd_emmc_b {
+ 	status = "okay";
+-- 
+2.31.1
+

buildroot-external/board/hardkernel/patches/linux/5.9.16/0006-arm64-dts-meson-add-GPIO-line-names-to-ODROID-N2-N2.patch

@@ -0,0 +1,78 @@
+From d13c62fab2c91cacda74a9001ea6a6c7d8a9af39 Mon Sep 17 00:00:00 2001
+Message-Id: <d13c62fab2c91cacda74a9001ea6a6c7d8a9af39.1622055679.git.stefan@agner.ch>
+In-Reply-To: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agner.ch>
+References: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agner.ch>
+From: Hyeonki Hong <hhk7734@gmail.com>
+Date: Wed, 7 Apr 2021 04:26:09 +0000
+Subject: [PATCH 06/11] arm64: dts: meson: add GPIO line names to ODROID N2/N2+
+
+Add GPIO line-name identifiers to the ODROID N2/N2+ common dtsi.
+
+Signed-off-by: Hyeonki Hong <hhk7734@gmail.com>
+Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
+Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
+Signed-off-by: Kevin Hilman <khilman@baylibre.com>
+Link: https://lore.kernel.org/r/20210407042609.9736-4-christianshewitt@gmail.com
+---
+ .../dts/amlogic/meson-g12b-odroid-n2.dtsi     | 45 +++++++++++++++++++
+ 1 file changed, 45 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+index 194a437b4e3f..fe85aa6da460 100644
+--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
++++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+@@ -446,6 +446,51 @@ &frddr_c {
+ };
+ 
+ &gpio {
++	gpio-line-names =
++		/* GPIOZ */
++		"", "", "", "", "", "", "", "",
++		"", "", "", "", "", "", "", "",
++		/* GPIOH */
++		"", "", "", "", "", "", "", "",
++		"",
++		/* BOOT */
++		"", "", "", "", "", "", "", "",
++		"", "", "", "", "", "", "", "",
++		/* GPIOC */
++		"", "", "", "", "", "", "", "",
++		/* GPIOA */
++		"PIN_44", /* GPIOA_0 */
++		"PIN_46", /* GPIOA_1 */
++		"PIN_45", /* GPIOA_2 */
++		"PIN_47", /* GPIOA_3 */
++		"PIN_26", /* GPIOA_4 */
++		"", "", "", "", "", "",
++		"PIN_42", /* GPIOA_11 */
++		"PIN_32", /* GPIOA_12 */
++		"PIN_7",  /* GPIOA_13 */
++		"PIN_27", /* GPIOA_14 */
++		"PIN_28", /* GPIOA_15 */
++		/* GPIOX */
++		"PIN_16", /* GPIOX_0 */
++		"PIN_18", /* GPIOX_1 */
++		"PIN_22", /* GPIOX_2 */
++		"PIN_11", /* GPIOX_3 */
++		"PIN_13", /* GPIOX_4 */
++		"PIN_33", /* GPIOX_5 */
++		"PIN_35", /* GPIOX_6 */
++		"PIN_15", /* GPIOX_7 */
++		"PIN_19", /* GPIOX_8 */
++		"PIN_21", /* GPIOX_9 */
++		"PIN_24", /* GPIOX_10 */
++		"PIN_23", /* GPIOX_11 */
++		"PIN_8",  /* GPIOX_12 */
++		"PIN_10", /* GPIOX_13 */
++		"PIN_29", /* GPIOX_14 */
++		"PIN_31", /* GPIOX_15 */
++		"PIN_12", /* GPIOX_16 */
++		"PIN_3",  /* GPIOX_17 */
++		"PIN_5",  /* GPIOX_18 */
++		"PIN_36"; /* GPIOX_19 */
+ 	/*
+ 	 * WARNING: The USB Hub on the Odroid-N2 needs a reset signal
+ 	 * to be turned high in order to be detected by the USB Controller
+-- 
+2.31.1
+

buildroot-external/board/hardkernel/patches/linux/5.9.16/0007-arm64-dts-meson-g12b-add-power-button-support.patch

@@ -0,0 +1,42 @@
+From 25cd545d370b67f5e5e19d93484d378571526da2 Mon Sep 17 00:00:00 2001
+Message-Id: <25cd545d370b67f5e5e19d93484d378571526da2.1622055679.git.stefan@agner.ch>
+In-Reply-To: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agner.ch>
+References: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agner.ch>
+From: Stefan Agner <stefan@agner.ch>
+Date: Mon, 11 Jan 2021 11:20:48 +0100
+Subject: [PATCH 07/11] arm64: dts: meson: g12b: add power button support
+
+Add power button support on J2 pin 11 (GPIOX_3 on the SoC side). The
+GPIO is low active, e.g. when connecting with pin 9 (GND) a power
+button press is triggered.
+
+Signed-off-by: Stefan Agner <stefan@agner.ch>
+---
+ arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 11 +++++++++++
+ 1 file changed, 11 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+index fe85aa6da460..9b1541ee2273 100644
+--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
++++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+@@ -39,6 +39,17 @@ emmc_pwrseq: emmc-pwrseq {
+ 		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+ 	};
+ 
++	gpio-keys-polled {
++		compatible = "gpio-keys-polled";
++		poll-interval = <100>;
++
++		power-button {
++			label = "power";
++			linux,code = <KEY_POWER>;
++			gpios = <&gpio GPIOX_3 GPIO_ACTIVE_LOW>;
++		};
++	};
++
+ 	leds {
+ 		compatible = "gpio-leds";
+ 
+-- 
+2.31.1
+

buildroot-external/board/hardkernel/patches/linux/5.9.16/0008-arm64-dts-meson-g12b-add-GPIO-fan-support.patch

@@ -0,0 +1,42 @@
+From b94a0698f21a2d8f6623b69fc17fe9491bc22a9b Mon Sep 17 00:00:00 2001
+Message-Id: <b94a0698f21a2d8f6623b69fc17fe9491bc22a9b.1622055679.git.stefan@agner.ch>
+In-Reply-To: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agner.ch>
+References: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agner.ch>
+From: Stefan Agner <stefan@agner.ch>
+Date: Mon, 11 Jan 2021 11:38:54 +0100
+Subject: [PATCH 08/11] arm64: dts: meson: g12b: add GPIO fan support
+
+Add simple GPIO fan node to support a fan on GPIO J8. Unfortunately the
+pad used to control the fan does not support real PWM, hence the RPM
+cannot be modulated.
+
+Signed-off-by: Stefan Agner <stefan@agner.ch>
+---
+ arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 11 +++++++++++
+ 1 file changed, 11 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+index 9b1541ee2273..8ad7c3ee1aa3 100644
+--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
++++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+@@ -39,6 +39,17 @@ emmc_pwrseq: emmc-pwrseq {
+ 		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+ 	};
+ 
++	/*
++	 * 5V 80x80x10.8mm cooling fan from Hardkernel shop.
++	 */
++	fan0: gpio-fan {
++		#cooling-cells = <2>;
++		compatible = "gpio-fan";
++		gpio-fan,speed-map = <0 0 1600 1>;
++		gpios = <&gpio_ao GPIOAO_10 GPIO_ACTIVE_HIGH>;
++		status = "okay";
++	};
++
+ 	gpio-keys-polled {
+ 		compatible = "gpio-keys-polled";
+ 		poll-interval = <100>;
+-- 
+2.31.1
+

buildroot-external/board/hardkernel/patches/linux/5.9.16/0009-arm64-dts-meson-g12b-odroid-n2-add-fan-as-cooling-de.patch

@@ -0,0 +1,74 @@
+From 4d9f93dbdc93e83ba8ddf01893b3c29cd11a87f9 Mon Sep 17 00:00:00 2001
+Message-Id: <4d9f93dbdc93e83ba8ddf01893b3c29cd11a87f9.1622055679.git.stefan@agner.ch>
+In-Reply-To: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agner.ch>
+References: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agner.ch>
+From: Stefan Agner <stefan@agner.ch>
+Date: Mon, 11 Jan 2021 15:53:55 +0100
+Subject: [PATCH 09/11] arm64: dts: meson: g12b: odroid-n2: add fan as cooling
+ device
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Add the GPIO fan as a cooling device for the CPU thermal zone. Since we
+have only full fan speed available with this, set the tripping point to
+65°C which is the highest tripping point which Hardkernel used in their
+downstream kernel.
+
+Signed-off-by: Stefan Agner <stefan@agner.ch>
+---
+ .../dts/amlogic/meson-g12b-odroid-n2.dtsi     | 38 +++++++++++++++++++
+ 1 file changed, 38 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+index 8ad7c3ee1aa3..c4052293ea0d 100644
+--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
++++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+@@ -388,6 +388,44 @@ &clkc_audio {
+ 	status = "okay";
+ };
+ 
++&cpu_thermal {
++	trips {
++		cpu_warm: cpu_warm {
++			hysteresis = <5000>;
++			temperature = <65000>;
++			type = "active";
++		};
++	};
++
++	cooling-maps {
++		map0 {
++			cooling-device =
++				<&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
++			trip = <&cpu_warm>;
++		};
++		map1 {
++			trip = <&cpu_passive>;
++			cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
++					 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
++					 <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
++					 <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
++					 <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
++					 <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
++					 <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
++		};
++		map2 {
++			trip = <&cpu_hot>;
++			cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
++					 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
++					 <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
++					 <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
++					 <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
++					 <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
++					 <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
++		};
++	};
++};
++
+ &cpu0 {
+ 	cpu-supply = <&vddcpu_b>;
+ 	operating-points-v2 = <&cpu_opp_table_0>;
+-- 
+2.31.1
+

buildroot-external/board/hardkernel/patches/linux/5.9.16/0010-arm64-dts-meson-add-uart_A-node.patch

@@ -0,0 +1,44 @@
+From 1eeec94aa6dd6f9900e6213025916eb85f6b3b62 Mon Sep 17 00:00:00 2001
+Message-Id: <1eeec94aa6dd6f9900e6213025916eb85f6b3b62.1622055679.git.stefan@agner.ch>
+In-Reply-To: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agner.ch>
+References: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agner.ch>
+From: Hyeonki Hong <hhk7734@gmail.com>
+Date: Fri, 27 Mar 2020 17:05:22 +0900
+Subject: [PATCH 10/11] arm64: dts: meson: add uart_A node
+
+The UART_A is available through J3 pin 8/10 and documented to be
+available as UART by default.
+
+Signed-off-by: Stefan Agner <stefan@agner.ch>
+---
+ arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 7 +++++++
+ 1 file changed, 7 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+index c4052293ea0d..38a996ed3e19 100644
+--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
++++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+@@ -12,6 +12,7 @@
+ / {
+ 	aliases {
+ 		serial0 = &uart_AO;
++		serial1 = &uart_A;
+ 		ethernet0 = &ethmac;
+ 		rtc0 = &rtc;
+ 		rtc1 = &vrtc;
+@@ -728,6 +729,12 @@ &toddr_c {
+ 	status = "okay";
+ };
+ 
++&uart_A {
++	status = "okay";
++	pinctrl-0 = <&uart_a_pins>;
++	pinctrl-names = "default";
++};
++
+ &uart_AO {
+ 	status = "okay";
+ 	pinctrl-0 = <&uart_ao_a_pins>;
+-- 
+2.31.1
+

buildroot-external/board/hardkernel/patches/linux/5.9.16/0011-arm64-dts-meson-add-i2c2-node-to-ODROID-N2-N2.patch

@@ -0,0 +1,37 @@
+From 400fce2e1eaab6d04f542eaa0fe3b53fb9d79d82 Mon Sep 17 00:00:00 2001
+Message-Id: <400fce2e1eaab6d04f542eaa0fe3b53fb9d79d82.1622055679.git.stefan@agner.ch>
+In-Reply-To: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agner.ch>
+References: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agner.ch>
+From: Stefan Agner <stefan@agner.ch>
+Date: Thu, 29 Apr 2021 21:32:43 +0200
+Subject: [PATCH 11/11] arm64: dts: meson: add i2c2 node to ODROID N2/N2+
+
+The J2 connectors pinout documents "I2C.SDA0/SCL0" on pin 3 and 5, which
+are connected to GPIOX_17/18. This GPIO allow to mux I2C to the second
+I2C instance. Enable i2c2 and use the appropriate pinmux.
+
+Signed-off-by: Stefan Agner <stefan@agner.ch>
+---
+ arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+index 38a996ed3e19..45a8998c4a3a 100644
+--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
++++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+@@ -586,6 +586,12 @@ &ir {
+ 	linux,rc-map-name = "rc-odroid";
+ };
+ 
++&i2c2 {
++	status = "okay";
++	pinctrl-0 = <&i2c2_sda_x_pins>, <&i2c2_sck_x_pins>;
++	pinctrl-names = "default";
++};
++
+ &i2c3 {
+ 	status = "okay";
+ 	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+-- 
+2.31.1
+

buildroot-external/board/hardkernel/patches/uboot/0001-ARM-meson-isolate-loading-of-socinfo.patch

@@ -1,51 +0,0 @@
-From 526ccae8321b9b48925c44999611c3c5a374328e Mon Sep 17 00:00:00 2001
-Message-Id: <526ccae8321b9b48925c44999611c3c5a374328e.1607542946.git.stefan@agner.ch>
-From: Stefan Agner <stefan@agner.ch>
-Date: Mon, 31 Aug 2020 13:40:18 +0200
-Subject: [PATCH 1/3] ARM: meson: isolate loading of socinfo
-
-Move loading of socinfo into a separate function so the value can be
-reused later.
-
-Signed-off-by: Stefan Agner <stefan@agner.ch>
----
- arch/arm/mach-meson/board-info.c | 14 +++++++++++++-
- 1 file changed, 13 insertions(+), 1 deletion(-)
-
-diff --git a/arch/arm/mach-meson/board-info.c b/arch/arm/mach-meson/board-info.c
-index 3abb27e03b..c585b12ca5 100644
---- a/arch/arm/mach-meson/board-info.c
-+++ b/arch/arm/mach-meson/board-info.c
-@@ -126,7 +126,7 @@ static void print_board_model(void)
- 	printf("Model: %s\n", model ? model : "Unknown");
- }
- 
--int show_board_info(void)
-+static unsigned int get_socinfo(void)
- {
- 	struct regmap *regmap;
- 	int nodeoffset, ret;
-@@ -158,8 +158,20 @@ int show_board_info(void)
- 		return 0;
- 	}
- 
-+	return socinfo;
-+}
-+
-+int show_board_info(void)
-+{
-+	unsigned int socinfo;
-+
- 	/* print board information */
- 	print_board_model();
-+
-+	socinfo = get_socinfo();
-+	if (!socinfo)
-+		return 0;
-+
- 	printf("SoC:   Amlogic Meson %s (%s) Revision %x:%x (%x:%x)\n",
- 	       socinfo_to_soc_id(socinfo),
- 	       socinfo_to_package_id(socinfo),
--- 
-2.29.2
-

buildroot-external/board/hardkernel/patches/uboot/0001-HACK-mmc-meson-gx-limit-to-24MHz.patch

@@ -1,10 +1,8 @@
-From 0077176ac369a1125c3fb22f7ba8e5d53576a1b3 Mon Sep 17 00:00:00 2001
-Message-Id: <0077176ac369a1125c3fb22f7ba8e5d53576a1b3.1607542946.git.stefan@agner.ch>
-In-Reply-To: <526ccae8321b9b48925c44999611c3c5a374328e.1607542946.git.stefan@agner.ch>
-References: <526ccae8321b9b48925c44999611c3c5a374328e.1607542946.git.stefan@agner.ch>
+From 8511fa06c13a9761e53ed72fe7111f5c3e3514a0 Mon Sep 17 00:00:00 2001
+Message-Id: <8511fa06c13a9761e53ed72fe7111f5c3e3514a0.1617731946.git.stefan@agner.ch>
 From: Neil Armstrong <narmstrong@baylibre.com>
 Date: Mon, 2 Sep 2019 15:42:04 +0200
-Subject: [PATCH 3/3] HACK: mmc: meson-gx: limit to 24MHz
+Subject: [PATCH] HACK: mmc: meson-gx: limit to 24MHz
 
 Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
 ---
@@ -12,10 +10,10 @@ Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
  1 file changed, 1 insertion(+), 1 deletion(-)
 
 diff --git a/drivers/mmc/meson_gx_mmc.c b/drivers/mmc/meson_gx_mmc.c
-index 719dd1e5e5..dd3dd7c08c 100644
+index fcf4f03d1e..6ded4b619b 100644
 --- a/drivers/mmc/meson_gx_mmc.c
 +++ b/drivers/mmc/meson_gx_mmc.c
-@@ -265,7 +265,7 @@ static int meson_mmc_probe(struct udevice *dev)
+@@ -279,7 +279,7 @@ static int meson_mmc_probe(struct udevice *dev)
  	cfg->host_caps = MMC_MODE_8BIT | MMC_MODE_4BIT |
  			MMC_MODE_HS_52MHz | MMC_MODE_HS;
  	cfg->f_min = DIV_ROUND_UP(SD_EMMC_CLKSRC_24M, CLK_MAX_DIV);
@@ -25,5 +23,5 @@ index 719dd1e5e5..dd3dd7c08c 100644
  	cfg->name = dev->name;
  
 -- 
-2.29.2
+2.31.1
 

buildroot-external/board/hardkernel/patches/uboot/0002-arm64-dts-meson-odroidc2-readd-PHY-reset-properties.patch

@@ -0,0 +1,38 @@
+From e194459c7459a1c6f9d1183e05186d164f0c6715 Mon Sep 17 00:00:00 2001
+Message-Id: <e194459c7459a1c6f9d1183e05186d164f0c6715.1617807077.git.stefan@agner.ch>
+In-Reply-To: <8511fa06c13a9761e53ed72fe7111f5c3e3514a0.1617807077.git.stefan@agner.ch>
+References: <8511fa06c13a9761e53ed72fe7111f5c3e3514a0.1617807077.git.stefan@agner.ch>
+From: Stefan Agner <stefan@agner.ch>
+Date: Thu, 1 Apr 2021 14:33:57 +0200
+Subject: [PATCH 2/2] arm64: dts: meson: odroidc2: readd PHY reset properties
+
+The sync of the device tree and dt-bindings from Linux v5.6-rc2
+11a48a5a18c6 ("Linux 5.6-rc2") causes Ethernet to break on some
+ODROID-C2. The PHY seems to need proper reset timing to be functional
+in U-Boot and Linux afterwards. Readd the old PHY reset bindings for
+dwmac until we support the new bindings in the PHY node.
+
+Fixes: dd5f2351e99a ("arm64: dts: meson: sync dt and bindings from v5.6-rc2")
+Signed-off-by: Stefan Agner <stefan@agner.ch>
+---
+ arch/arm/dts/meson-gxbb-odroidc2.dts | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+diff --git a/arch/arm/dts/meson-gxbb-odroidc2.dts b/arch/arm/dts/meson-gxbb-odroidc2.dts
+index 70fcfb7b06..8b80bbc90b 100644
+--- a/arch/arm/dts/meson-gxbb-odroidc2.dts
++++ b/arch/arm/dts/meson-gxbb-odroidc2.dts
+@@ -188,6 +188,10 @@
+ 	phy-handle = <&eth_phy0>;
+ 	phy-mode = "rgmii";
+ 
++	snps,reset-gpio = <&gpio GPIOZ_14 0>;
++	snps,reset-delays-us = <0 10000 1000000>;
++	snps,reset-active-low;
++
+ 	amlogic,tx-delay-ns = <2>;
+ 
+ 	mdio {
+-- 
+2.31.1
+

buildroot-external/board/hardkernel/patches/uboot/0002-meson-Add-board_rev-to-env.patch

@@ -1,82 +0,0 @@
-From 2b2ad8c105cbb5fb48c3c5f0512c031f6533d522 Mon Sep 17 00:00:00 2001
-Message-Id: <2b2ad8c105cbb5fb48c3c5f0512c031f6533d522.1607542946.git.stefan@agner.ch>
-In-Reply-To: <526ccae8321b9b48925c44999611c3c5a374328e.1607542946.git.stefan@agner.ch>
-References: <526ccae8321b9b48925c44999611c3c5a374328e.1607542946.git.stefan@agner.ch>
-From: Pascal Vizeli <pvizeli@syshack.ch>
-Date: Tue, 4 Aug 2020 13:50:57 +0000
-Subject: [PATCH 2/3] meson: Add board_rev to env
-
-Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch>
-Signed-off-by: Stefan Agner <stefan@agner.ch>
----
- arch/arm/include/asm/arch-meson/boot.h |  4 ++++
- arch/arm/mach-meson/board-info.c       | 12 ++++++++++++
- board/amlogic/odroid-n2/odroid-n2.c    |  5 +++++
- 3 files changed, 21 insertions(+)
-
-diff --git a/arch/arm/include/asm/arch-meson/boot.h b/arch/arm/include/asm/arch-meson/boot.h
-index a90fe55081..c67d12d06c 100644
---- a/arch/arm/include/asm/arch-meson/boot.h
-+++ b/arch/arm/include/asm/arch-meson/boot.h
-@@ -7,6 +7,8 @@
- #ifndef __MESON_BOOT_H__
- #define __MESON_BOOT_H__
- 
-+#include <linux/types.h>
-+
- /* Boot device */
- #define BOOT_DEVICE_RESERVED    0
- #define BOOT_DEVICE_EMMC        1
-@@ -17,4 +19,6 @@
- 
- int meson_get_boot_device(void);
- 
-+int meson_get_soc_rev(char *buff, size_t buff_len);
-+
- #endif /* __MESON_BOOT_H__ */
-diff --git a/arch/arm/mach-meson/board-info.c b/arch/arm/mach-meson/board-info.c
-index c585b12ca5..9dbb997281 100644
---- a/arch/arm/mach-meson/board-info.c
-+++ b/arch/arm/mach-meson/board-info.c
-@@ -182,3 +182,15 @@ int show_board_info(void)
- 
- 	return 0;
- }
-+
-+int meson_get_soc_rev(char *buff, size_t buff_len)
-+{
-+	unsigned int socinfo;
-+
-+	socinfo = get_socinfo();
-+	if (!socinfo)
-+		return -1;
-+
-+	/* Write SoC info */
-+	return snprintf(buff, buff_len, "%x", socinfo_to_minor(socinfo));
-+}
-diff --git a/board/amlogic/odroid-n2/odroid-n2.c b/board/amlogic/odroid-n2/odroid-n2.c
-index caf7fd6810..c2a191ba6a 100644
---- a/board/amlogic/odroid-n2/odroid-n2.c
-+++ b/board/amlogic/odroid-n2/odroid-n2.c
-@@ -12,6 +12,7 @@
- #include <asm/io.h>
- #include <asm/arch/sm.h>
- #include <asm/arch/eth.h>
-+#include <asm/arch/boot.h>
- 
- #define EFUSE_MAC_OFFSET	20
- #define EFUSE_MAC_SIZE		12
-@@ -23,6 +24,10 @@ int misc_init_r(void)
- 	char efuse_mac_addr[EFUSE_MAC_SIZE], tmp[3];
- 	ssize_t len;
- 
-+	if (meson_get_soc_rev(tmp, sizeof(tmp)) > 0) {
-+		env_set("board_rev", tmp);
-+	}
-+
- 	meson_eth_init(PHY_INTERFACE_MODE_RGMII, 0);
- 
- 	if (!eth_env_get_enetaddr("ethaddr", mac_addr)) {
--- 
-2.29.2
-

buildroot-external/board/pc/barebox.config

@@ -6,6 +6,5 @@ CONFIG_DRIVER_SERIAL_EFI_STDIO=y
 # CONFIG_SPI is not set
 CONFIG_DISK=y
 CONFIG_DISK_WRITE=y
-CONFIG_CLOCKSOURCE_EFI=y
 CONFIG_FS_EFI=y
 CONFIG_FS_EFIVARFS=y

buildroot-external/board/pc/generic-x86-64/kernel.config

@@ -7,6 +7,7 @@ CONFIG_BLK_DEV_NVME=y
 # CONFIG_E1000E is not set
 
 CONFIG_IGB=y
+CONFIG_IGC=m
 
 CONFIG_IWLWIFI=m
 CONFIG_IWLMVM=m
@@ -15,3 +16,12 @@ CONFIG_DRM_I915=m
 CONFIG_DRM_I915_CAPTURE_ERROR=y
 CONFIG_DRM_I915_COMPRESS_ERROR=y
 CONFIG_DRM_I915_USERPTR=y
+
+CONFIG_MMC=y
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ACPI=y
+CONFIG_MMC_SDHCI_PCI=y
+CONFIG_X86_INTEL_LPSS=y
+
+CONFIG_THINKPAD_ACPI=m

buildroot-external/board/pc/generic-x86-64/meta

@@ -1,10 +1,10 @@
-BOARD_ID=intel-nuc
-BOARD_NAME="Intel NUC"
+BOARD_ID=generic-x86-64
+BOARD_NAME="Generic x86-64"
 CHASSIS=embedded
 BOOTLOADER=barebox
 KERNEL_FILE=bzImage
 BOOT_SYS=efi
 BOOT_SPL=false
 DISK_SIZE=6
-SUPERVISOR_MACHINE=intel-nuc
+SUPERVISOR_MACHINE=generic-x86-64
 SUPERVISOR_ARCH=amd64

buildroot-external/board/pc/ova/hassos-hook.sh

@@ -10,7 +10,7 @@ function hassos_pre_image() {
     cp "${BINARIES_DIR}/barebox.bin" "${BOOT_DATA}/EFI/BOOT/BOOTx64.EFI"
     cp "${BR2_EXTERNAL_HASSOS_PATH}/bootloader/barebox-state-efi.dtb" "${BOOT_DATA}/EFI/barebox/state.dtb"
 
-    echo "console=tty1" > "${BOOT_DATA}/cmdline.txt"
+    echo "console=ttyS0 console=tty1" > "${BOOT_DATA}/cmdline.txt"
 }
 
 
@@ -22,9 +22,9 @@ function hassos_post_image() {
     # Virtual Disk images
     convert_disk_image_virtual
 
-    convert_disk_image_xz vmdk
-    convert_disk_image_xz vhdx
-    convert_disk_image_xz vdi
+    convert_disk_image_zip vmdk
+    convert_disk_image_zip vhdx
+    convert_disk_image_zip vdi
     convert_disk_image_xz qcow2
 
     # OVA

buildroot-external/board/pc/ova/home-assistant.ovf

@@ -5,7 +5,7 @@
   </References>
   <DiskSection>
     <Info>List of the virtual disks used in the package</Info>
-    <Disk ovf:capacity="6442450944" ovf:diskId="vmdisk1" ovf:fileRef="file1" ovf:format="http://www.vmware.com/interfaces/specifications/vmdk.html#streamOptimized" ovf:boot="True" vbox:uuid="5f042839-c478-43d9-9eb0-fd8a902146ec"/>
+    <Disk ovf:capacity="34359738368" ovf:diskId="vmdisk1" ovf:fileRef="file1" ovf:format="http://www.vmware.com/interfaces/specifications/vmdk.html#streamOptimized" ovf:boot="True" vbox:uuid="5f042839-c478-43d9-9eb0-fd8a902146ec"/>
   </DiskSection>
   <NetworkSection>
     <Info>Logical networks used in the package</Info>
@@ -21,7 +21,7 @@
       <Product>Home Assistant Operating System</Product>
       <ProductUrl>https://www.home-assistant.io</ProductUrl>
     </ProductSection>
-    <OperatingSystemSection ovf:id="100" vmw:osType="other4xLinux64Guest">
+    <OperatingSystemSection ovf:id="102" vmw:osType="otherGuest64">
       <Info>The kind of installed guest operating system</Info>
       <Description>Linux</Description>
     </OperatingSystemSection>

buildroot-external/board/pc/ova/kernel.config

@@ -1,5 +1,10 @@
 CONFIG_EFI_STUB=y
 
+CONFIG_HOTPLUG_CPU=y
+CONFIG_MEMORY_HOTPLUG=y
+CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=y
+CONFIG_MEMORY_HOTREMOVE=y
+
 CONFIG_VMXNET3=y
 CONFIG_VMWARE_PVSCSI=y
 CONFIG_VMWARE_VMCI_VSOCKETS=y

buildroot-external/board/raspberrypi/boot-env.txt

@@ -2,7 +2,7 @@
 # http://rpf.io/configtxt
 # Some settings may impact device functionality. See link above for details
 
-# HassOS - don't change it!
+# HAOS - don't change it!
 disable_splash=1
 kernel=u-boot.bin
 
@@ -60,6 +60,12 @@ kernel=u-boot.bin
 # Uncomment this to enable the lirc-rpi module
 #dtoverlay=lirc-rpi
 
+# Uncomment this to enable GPIO support for RPI-RF-MOD/HM-MOD-RPI-PCB
+#enable_uart=1
+#dtparam=i2c_arm=on
+#dtoverlay=miniuart-bt
+#dtoverlay=rpi-rf-mod
+
 # Additional overlays and parameters are documented /boot/overlays/README
 
 # Enable audio (loads snd_bcm2835)