Supervisor: update Hass.io to 150

OS: Enable systemd-coredump (#382 )
Bump version 2.11
2019-03-21 11:22:08 +00:00 · 2019-03-20 17:11:43 +00:00 · 2019-03-20 10:31:11 +00:00 · 2019-03-20 10:29:45 +00:00 · 2019-03-20 10:28:51 +00:00 · 2019-03-20 10:28:35 +00:00
25 changed files with 547 additions and 48 deletions
--- a/Documentation/kernel.md
+++ b/Documentation/kernel.md
@@ -4,7 +4,7 @@
 | Board | Version |
 |-------|---------|
 | Open Virtual Applicance | 4.19.20 |
-| Raspberry Pi | 4.14.81 |
+| Raspberry Pi | 4.14.98 |
 | Tinker Board | 4.19.20 |
 | Odroid-C2 | 4.19.15 |
 | Odroid-XU4 | 4.19.15 |
--- a/buildroot-external/board/hardkernel/odroid-xu4/patches/linux/000-arm-exynos_change_the_default_dma_coherent_pool_size.patch
+++ b/buildroot-external/board/hardkernel/odroid-xu4/patches/linux/000-arm-exynos_change_the_default_dma_coherent_pool_size.patch
@@ -0,0 +1,42 @@
+diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
+index bf02dbd9ccda3..8029e21eee149 100644
+--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
+@@ -5,7 +5,9 @@
+ 
+ #include <linux/mm_types.h>
+ #include <linux/scatterlist.h>
+#include <linux/device.h>
+ #include <linux/dma-debug.h>
+#include <linux/dma-direction.h>
+ 
+ #include <asm/memory.h>
+ 
+diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c
+index fd6da5419b510..5b3abc935e7fc 100644
+--- a/arch/arm/mach-exynos/firmware.c
+++ b/arch/arm/mach-exynos/firmware.c
+@@ -13,12 +13,14 @@
+ #include <linux/init.h>
+ #include <linux/of.h>
+ #include <linux/of_address.h>
+#include <linux/sizes.h>
+ 
+ #include <asm/cacheflush.h>
+ #include <asm/cputype.h>
+ #include <asm/firmware.h>
+ #include <asm/hardware/cache-l2x0.h>
+ #include <asm/suspend.h>
+#include <asm/dma-mapping.h>
+ 
+ #include "common.h"
+ #include "smc.h"
+@@ -225,6 +227,8 @@ void __init exynos_firmware_init(void)
+ 		outer_cache.write_sec = exynos_l2_write_sec;
+ 		outer_cache.configure = exynos_l2_configure;
+ 	}
+
+	init_dma_coherent_pool_size(SZ_1M);
+ }
+ 
+ #define REG_CPU_STATE_ADDR	(sysram_ns_base_addr + 0x28)
--- a/buildroot-external/configs/intel_nuc_defconfig
+++ b/buildroot-external/configs/intel_nuc_defconfig
@@ -74,6 +74,7 @@ BR2_PACKAGE_RNG_TOOLS=y
 # BR2_PACKAGE_SYSTEMD_NETWORKD is not set
 BR2_PACKAGE_SYSTEMD_RANDOMSEED=y
 # BR2_PACKAGE_SYSTEMD_RESOLVED is not set
+BR2_PACKAGE_SYSTEMD_COREDUMP=y
 BR2_PACKAGE_UTIL_LINUX_PARTX=y
 BR2_PACKAGE_UTIL_LINUX_ZRAMCTL=y
 BR2_TARGET_ROOTFS_SQUASHFS=y
@@ -93,12 +94,12 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/amd64-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="142"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="150"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/intel-nuc-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/amd64-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="8"
+BR2_PACKAGE_HASSOS_CLI_VERSION="9"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"
--- a/buildroot-external/configs/odroid_c2_defconfig
+++ b/buildroot-external/configs/odroid_c2_defconfig
@@ -66,6 +66,7 @@ BR2_PACKAGE_RNG_TOOLS=y
 # BR2_PACKAGE_SYSTEMD_NETWORKD is not set
 BR2_PACKAGE_SYSTEMD_RANDOMSEED=y
 # BR2_PACKAGE_SYSTEMD_RESOLVED is not set
+BR2_PACKAGE_SYSTEMD_COREDUMP=y
 BR2_PACKAGE_UTIL_LINUX_PARTX=y
 BR2_PACKAGE_UTIL_LINUX_ZRAMCTL=y
 BR2_TARGET_ROOTFS_SQUASHFS=y
@@ -86,12 +87,12 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/aarch64-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="142"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="150"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/odroid-c2-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/aarch64-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="8"
+BR2_PACKAGE_HASSOS_CLI_VERSION="9"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"
--- a/buildroot-external/configs/odroid_xu4_defconfig
+++ b/buildroot-external/configs/odroid_xu4_defconfig
@@ -72,6 +72,7 @@ BR2_PACKAGE_RNG_TOOLS=y
 # BR2_PACKAGE_SYSTEMD_NETWORKD is not set
 BR2_PACKAGE_SYSTEMD_RANDOMSEED=y
 # BR2_PACKAGE_SYSTEMD_RESOLVED is not set
+BR2_PACKAGE_SYSTEMD_COREDUMP=y
 BR2_PACKAGE_UTIL_LINUX_PARTX=y
 BR2_PACKAGE_UTIL_LINUX_ZRAMCTL=y
 BR2_TARGET_ROOTFS_SQUASHFS=y
@@ -93,13 +94,13 @@ BR2_PACKAGE_HOST_GPTFDISK=y
 BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
-BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/armhf-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="142"
+BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/armv7-hassio-supervisor"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="150"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/odroid-xu-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
-BR2_PACKAGE_HASSOS_CLI="homeassistant/armhf-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="8"
+BR2_PACKAGE_HASSOS_CLI="homeassistant/armv7-hassio-cli"
+BR2_PACKAGE_HASSOS_CLI_VERSION="9"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"
--- a/buildroot-external/configs/opi_prime_defconfig
+++ b/buildroot-external/configs/opi_prime_defconfig
@@ -88,6 +88,7 @@ BR2_PACKAGE_RAUC_NETWORK=y
 # BR2_PACKAGE_SYSTEMD_NETWORKD is not set
 BR2_PACKAGE_SYSTEMD_RANDOMSEED=y
 # BR2_PACKAGE_SYSTEMD_RESOLVED is not set
+BR2_PACKAGE_SYSTEMD_COREDUMP=y
 BR2_PACKAGE_UTIL_LINUX_PARTX=y
 BR2_PACKAGE_UTIL_LINUX_ZRAMCTL=y
 BR2_TARGET_ROOTFS_SQUASHFS=y
@@ -101,12 +102,12 @@ BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HOST_SWIG=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/aarch64-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="142"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="150"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/orangepi-prime-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/aarch64-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="8"
+BR2_PACKAGE_HASSOS_CLI_VERSION="9"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"
--- a/buildroot-external/configs/ova_defconfig
+++ b/buildroot-external/configs/ova_defconfig
@@ -62,6 +62,7 @@ BR2_PACKAGE_RNG_TOOLS=y
 # BR2_PACKAGE_SYSTEMD_NETWORKD is not set
 BR2_PACKAGE_SYSTEMD_RANDOMSEED=y
 # BR2_PACKAGE_SYSTEMD_RESOLVED is not set
+BR2_PACKAGE_SYSTEMD_COREDUMP=y
 BR2_PACKAGE_UTIL_LINUX_PARTX=y
 BR2_PACKAGE_UTIL_LINUX_ZRAMCTL=y
 BR2_TARGET_ROOTFS_SQUASHFS=y
@@ -81,12 +82,12 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/amd64-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="142"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="150"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/qemux86-64-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/amd64-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="8"
+BR2_PACKAGE_HASSOS_CLI_VERSION="9"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"
--- a/buildroot-external/configs/rpi0_w_defconfig
+++ b/buildroot-external/configs/rpi0_w_defconfig
@@ -23,7 +23,7 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi0-
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
 BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="f6878de4d2818c2256b2a340eaeeabfb0b24c71b"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="877656cd145497db7c09a7de06ea85db98bd72a3"
 BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
@@ -70,6 +70,7 @@ BR2_PACKAGE_RNG_TOOLS=y
 # BR2_PACKAGE_SYSTEMD_NETWORKD is not set
 BR2_PACKAGE_SYSTEMD_RANDOMSEED=y
 # BR2_PACKAGE_SYSTEMD_RESOLVED is not set
+BR2_PACKAGE_SYSTEMD_COREDUMP=y
 BR2_PACKAGE_UTIL_LINUX_PARTX=y
 BR2_PACKAGE_UTIL_LINUX_ZRAMCTL=y
 BR2_TARGET_ROOTFS_SQUASHFS=y
@@ -90,12 +91,12 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/armhf-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="142"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="150"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/raspberrypi-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/armhf-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="8"
+BR2_PACKAGE_HASSOS_CLI_VERSION="9"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"
--- a/buildroot-external/configs/rpi2_defconfig
+++ b/buildroot-external/configs/rpi2_defconfig
@@ -23,7 +23,7 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi2
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
 BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="f6878de4d2818c2256b2a340eaeeabfb0b24c71b"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="877656cd145497db7c09a7de06ea85db98bd72a3"
 BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
@@ -69,6 +69,7 @@ BR2_PACKAGE_RNG_TOOLS=y
 # BR2_PACKAGE_SYSTEMD_NETWORKD is not set
 BR2_PACKAGE_SYSTEMD_RANDOMSEED=y
 # BR2_PACKAGE_SYSTEMD_RESOLVED is not set
+BR2_PACKAGE_SYSTEMD_COREDUMP=y
 BR2_PACKAGE_UTIL_LINUX_PARTX=y
 BR2_PACKAGE_UTIL_LINUX_ZRAMCTL=y
 BR2_TARGET_ROOTFS_SQUASHFS=y
@@ -88,13 +89,13 @@ BR2_PACKAGE_HOST_GPTFDISK=y
 BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
-BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/armhf-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="142"
+BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/armv7-hassio-supervisor"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="150"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/raspberrypi2-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
-BR2_PACKAGE_HASSOS_CLI="homeassistant/armhf-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="8"
+BR2_PACKAGE_HASSOS_CLI="homeassistant/armv7-hassio-cli"
+BR2_PACKAGE_HASSOS_CLI_VERSION="9"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"
--- a/buildroot-external/configs/rpi3_64_defconfig
+++ b/buildroot-external/configs/rpi3_64_defconfig
@@ -23,7 +23,7 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi3-
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
 BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="f6878de4d2818c2256b2a340eaeeabfb0b24c71b"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="877656cd145497db7c09a7de06ea85db98bd72a3"
 BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi3"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
@@ -70,6 +70,7 @@ BR2_PACKAGE_RNG_TOOLS=y
 # BR2_PACKAGE_SYSTEMD_NETWORKD is not set
 BR2_PACKAGE_SYSTEMD_RANDOMSEED=y
 # BR2_PACKAGE_SYSTEMD_RESOLVED is not set
+BR2_PACKAGE_SYSTEMD_COREDUMP=y
 BR2_PACKAGE_UTIL_LINUX_PARTX=y
 BR2_PACKAGE_UTIL_LINUX_ZRAMCTL=y
 BR2_TARGET_ROOTFS_SQUASHFS=y
@@ -90,12 +91,12 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/aarch64-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="142"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="150"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/raspberrypi3-64-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/aarch64-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="8"
+BR2_PACKAGE_HASSOS_CLI_VERSION="9"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"
--- a/buildroot-external/configs/rpi3_defconfig
+++ b/buildroot-external/configs/rpi3_defconfig
@@ -23,7 +23,7 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi3
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
 BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="f6878de4d2818c2256b2a340eaeeabfb0b24c71b"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="877656cd145497db7c09a7de06ea85db98bd72a3"
 BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
@@ -70,6 +70,7 @@ BR2_PACKAGE_RNG_TOOLS=y
 # BR2_PACKAGE_SYSTEMD_NETWORKD is not set
 BR2_PACKAGE_SYSTEMD_RANDOMSEED=y
 # BR2_PACKAGE_SYSTEMD_RESOLVED is not set
+BR2_PACKAGE_SYSTEMD_COREDUMP=y
 BR2_PACKAGE_UTIL_LINUX_PARTX=y
 BR2_PACKAGE_UTIL_LINUX_ZRAMCTL=y
 BR2_TARGET_ROOTFS_SQUASHFS=y
@@ -89,13 +90,13 @@ BR2_PACKAGE_HOST_GPTFDISK=y
 BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
-BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/armhf-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="142"
+BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/armv7-hassio-supervisor"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="150"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/raspberrypi3-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
-BR2_PACKAGE_HASSOS_CLI="homeassistant/armhf-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="8"
+BR2_PACKAGE_HASSOS_CLI="homeassistant/armv7-hassio-cli"
+BR2_PACKAGE_HASSOS_CLI_VERSION="9"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"
--- a/buildroot-external/configs/rpi_defconfig
+++ b/buildroot-external/configs/rpi_defconfig
@@ -23,7 +23,7 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi $
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
 BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="f6878de4d2818c2256b2a340eaeeabfb0b24c71b"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="877656cd145497db7c09a7de06ea85db98bd72a3"
 BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
@@ -69,6 +69,7 @@ BR2_PACKAGE_RNG_TOOLS=y
 # BR2_PACKAGE_SYSTEMD_NETWORKD is not set
 BR2_PACKAGE_SYSTEMD_RANDOMSEED=y
 # BR2_PACKAGE_SYSTEMD_RESOLVED is not set
+BR2_PACKAGE_SYSTEMD_COREDUMP=y
 BR2_PACKAGE_UTIL_LINUX_PARTX=y
 BR2_PACKAGE_UTIL_LINUX_ZRAMCTL=y
 BR2_TARGET_ROOTFS_SQUASHFS=y
@@ -89,12 +90,12 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/armhf-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="142"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="150"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/raspberrypi-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/armhf-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="8"
+BR2_PACKAGE_HASSOS_CLI_VERSION="9"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"
--- a/buildroot-external/configs/tinker_defconfig
+++ b/buildroot-external/configs/tinker_defconfig
@@ -69,6 +69,7 @@ BR2_PACKAGE_RNG_TOOLS=y
 # BR2_PACKAGE_SYSTEMD_NETWORKD is not set
 BR2_PACKAGE_SYSTEMD_RANDOMSEED=y
 # BR2_PACKAGE_SYSTEMD_RESOLVED is not set
+BR2_PACKAGE_SYSTEMD_COREDUMP=y
 BR2_PACKAGE_UTIL_LINUX_PARTX=y
 BR2_PACKAGE_UTIL_LINUX_ZRAMCTL=y
 BR2_TARGET_ROOTFS_SQUASHFS=y
@@ -92,13 +93,13 @@ BR2_PACKAGE_HOST_GPTFDISK=y
 BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
-BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/armhf-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="142"
+BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/armv7-hassio-supervisor"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="150"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/tinker-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
-BR2_PACKAGE_HASSOS_CLI="homeassistant/armhf-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="8"
+BR2_PACKAGE_HASSOS_CLI="homeassistant/armv7-hassio-cli"
+BR2_PACKAGE_HASSOS_CLI_VERSION="9"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"
--- a/buildroot-external/meta
+++ b/buildroot-external/meta
@@ -1,5 +1,5 @@
 VERSION_MAJOR=2
-VERSION_BUILD=9
+VERSION_BUILD=11

 HASSOS_NAME="HassOS"
 HASSOS_ID="hassos"
--- a/buildroot-external/patches/runc/0048-nsenter-clone-proc-self-exe-to-avoid-exposing-host-b.patch
+++ b/buildroot-external/patches/runc/0048-nsenter-clone-proc-self-exe-to-avoid-exposing-host-b.patch
@@ -0,0 +1,337 @@
+From 0a8e4117e7f715d5fbeef398405813ce8e88558b Mon Sep 17 00:00:00 2001
+From: Aleksa Sarai <asarai@suse.de>
+Date: Wed, 9 Jan 2019 13:40:01 +1100
+Subject: [PATCH 48/50] nsenter: clone /proc/self/exe to avoid exposing host
+ binary to container
+
+There are quite a few circumstances where /proc/self/exe pointing to a
+pretty important container binary is a _bad_ thing, so to avoid this we
+have to make a copy (preferably doing self-clean-up and not being
+writeable).
+
+We require memfd_create(2) -- though there is an O_TMPFILE fallback --
+but we can always extend this to use a scratch MNT_DETACH overlayfs or
+tmpfs. The main downside to this approach is no page-cache sharing for
+the runc binary (which overlayfs would give us) but this is far less
+complicated.
+
+This is only done during nsenter so that it happens transparently to the
+Go code, and any libcontainer users benefit from it. This also makes
+ExtraFiles and --preserve-fds handling trivial (because we don't need to
+worry about it).
+
+Fixes: CVE-2019-5736
+Co-developed-by: Christian Brauner <christian.brauner@ubuntu.com>
+Signed-off-by: Aleksa Sarai <asarai@suse.de>
+---
+ libcontainer/nsenter/cloned_binary.c | 268 +++++++++++++++++++++++++++
+ libcontainer/nsenter/nsexec.c        |  11 ++
+ 2 files changed, 279 insertions(+)
+ create mode 100644 libcontainer/nsenter/cloned_binary.c
+
+diff --git a/libcontainer/nsenter/cloned_binary.c b/libcontainer/nsenter/cloned_binary.c
+new file mode 100644
+index 00000000..c8a42c23
+--- /dev/null
+++ b/libcontainer/nsenter/cloned_binary.c
+@@ -0,0 +1,268 @@
+/*
+ * Copyright (C) 2019 Aleksa Sarai <cyphar@cyphar.com>
+ * Copyright (C) 2019 SUSE LLC
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#define _GNU_SOURCE
+#include <unistd.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdbool.h>
+#include <string.h>
+#include <limits.h>
+#include <fcntl.h>
+#include <errno.h>
+
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/vfs.h>
+#include <sys/mman.h>
+#include <sys/sendfile.h>
+#include <sys/syscall.h>
+
+/* Use our own wrapper for memfd_create. */
+#if !defined(SYS_memfd_create) && defined(__NR_memfd_create)
+#  define SYS_memfd_create __NR_memfd_create
+#endif
+#ifdef SYS_memfd_create
+#  define HAVE_MEMFD_CREATE
+/* memfd_create(2) flags -- copied from <linux/memfd.h>. */
+#  ifndef MFD_CLOEXEC
+#    define MFD_CLOEXEC       0x0001U
+#    define MFD_ALLOW_SEALING 0x0002U
+#  endif
+int memfd_create(const char *name, unsigned int flags)
+{
+	return syscall(SYS_memfd_create, name, flags);
+}
+#endif
+
+/* This comes directly from <linux/fcntl.h>. */
+#ifndef F_LINUX_SPECIFIC_BASE
+#  define F_LINUX_SPECIFIC_BASE 1024
+#endif
+#ifndef F_ADD_SEALS
+#  define F_ADD_SEALS (F_LINUX_SPECIFIC_BASE + 9)
+#  define F_GET_SEALS (F_LINUX_SPECIFIC_BASE + 10)
+#endif
+#ifndef F_SEAL_SEAL
+#  define F_SEAL_SEAL   0x0001	/* prevent further seals from being set */
+#  define F_SEAL_SHRINK 0x0002	/* prevent file from shrinking */
+#  define F_SEAL_GROW   0x0004	/* prevent file from growing */
+#  define F_SEAL_WRITE  0x0008	/* prevent writes */
+#endif
+
+#define RUNC_SENDFILE_MAX 0x7FFFF000 /* sendfile(2) is limited to 2GB. */
+#ifdef HAVE_MEMFD_CREATE
+#  define RUNC_MEMFD_COMMENT "runc_cloned:/proc/self/exe"
+#  define RUNC_MEMFD_SEALS \
+	(F_SEAL_SEAL | F_SEAL_SHRINK | F_SEAL_GROW | F_SEAL_WRITE)
+#endif
+
+static void *must_realloc(void *ptr, size_t size)
+{
+	void *old = ptr;
+	do {
+		ptr = realloc(old, size);
+	} while(!ptr);
+	return ptr;
+}
+
+/*
+ * Verify whether we are currently in a self-cloned program (namely, is
+ * /proc/self/exe a memfd). F_GET_SEALS will only succeed for memfds (or rather
+ * for shmem files), and we want to be sure it's actually sealed.
+ */
+static int is_self_cloned(void)
+{
+	int fd, ret, is_cloned = 0;
+
+	fd = open("/proc/self/exe", O_RDONLY|O_CLOEXEC);
+	if (fd < 0)
+		return -ENOTRECOVERABLE;
+
+#ifdef HAVE_MEMFD_CREATE
+	ret = fcntl(fd, F_GET_SEALS);
+	is_cloned = (ret == RUNC_MEMFD_SEALS);
+#else
+	struct stat statbuf = {0};
+	ret = fstat(fd, &statbuf);
+	if (ret >= 0)
+		is_cloned = (statbuf.st_nlink == 0);
+#endif
+	close(fd);
+	return is_cloned;
+}
+
+/*
+ * Basic wrapper around mmap(2) that gives you the file length so you can
+ * safely treat it as an ordinary buffer. Only gives you read access.
+ */
+static char *read_file(char *path, size_t *length)
+{
+	int fd;
+	char buf[4096], *copy = NULL;
+
+	if (!length)
+		return NULL;
+
+	fd = open(path, O_RDONLY | O_CLOEXEC);
+	if (fd < 0)
+		return NULL;
+
+	*length = 0;
+	for (;;) {
+		int n;
+
+		n = read(fd, buf, sizeof(buf));
+		if (n < 0)
+			goto error;
+		if (!n)
+			break;
+
+		copy = must_realloc(copy, (*length + n) * sizeof(*copy));
+		memcpy(copy + *length, buf, n);
+		*length += n;
+	}
+	close(fd);
+	return copy;
+
+error:
+	close(fd);
+	free(copy);
+	return NULL;
+}
+
+/*
+ * A poor-man's version of "xargs -0". Basically parses a given block of
+ * NUL-delimited data, within the given length and adds a pointer to each entry
+ * to the array of pointers.
+ */
+static int parse_xargs(char *data, int data_length, char ***output)
+{
+	int num = 0;
+	char *cur = data;
+
+	if (!data || *output != NULL)
+		return -1;
+
+	while (cur < data + data_length) {
+		num++;
+		*output = must_realloc(*output, (num + 1) * sizeof(**output));
+		(*output)[num - 1] = cur;
+		cur += strlen(cur) + 1;
+	}
+	(*output)[num] = NULL;
+	return num;
+}
+
+/*
+ * "Parse" out argv and envp from /proc/self/cmdline and /proc/self/environ.
+ * This is necessary because we are running in a context where we don't have a
+ * main() that we can just get the arguments from.
+ */
+static int fetchve(char ***argv, char ***envp)
+{
+	char *cmdline = NULL, *environ = NULL;
+	size_t cmdline_size, environ_size;
+
+	cmdline = read_file("/proc/self/cmdline", &cmdline_size);
+	if (!cmdline)
+		goto error;
+	environ = read_file("/proc/self/environ", &environ_size);
+	if (!environ)
+		goto error;
+
+	if (parse_xargs(cmdline, cmdline_size, argv) <= 0)
+		goto error;
+	if (parse_xargs(environ, environ_size, envp) <= 0)
+		goto error;
+
+	return 0;
+
+error:
+	free(environ);
+	free(cmdline);
+	return -EINVAL;
+}
+
+static int clone_binary(void)
+{
+	int binfd, memfd;
+	ssize_t sent = 0;
+
+#ifdef HAVE_MEMFD_CREATE
+	memfd = memfd_create(RUNC_MEMFD_COMMENT, MFD_CLOEXEC | MFD_ALLOW_SEALING);
+#else
+	memfd = open("/tmp", O_TMPFILE | O_EXCL | O_RDWR | O_CLOEXEC, 0711);
+#endif
+	if (memfd < 0)
+		return -ENOTRECOVERABLE;
+
+	binfd = open("/proc/self/exe", O_RDONLY | O_CLOEXEC);
+	if (binfd < 0)
+		goto error;
+
+	sent = sendfile(memfd, binfd, NULL, RUNC_SENDFILE_MAX);
+	close(binfd);
+	if (sent < 0)
+		goto error;
+
+#ifdef HAVE_MEMFD_CREATE
+	int err = fcntl(memfd, F_ADD_SEALS, RUNC_MEMFD_SEALS);
+	if (err < 0)
+		goto error;
+#else
+	/* Need to re-open "memfd" as read-only to avoid execve(2) giving -EXTBUSY. */
+	int newfd;
+	char *fdpath = NULL;
+
+	if (asprintf(&fdpath, "/proc/self/fd/%d", memfd) < 0)
+		goto error;
+	newfd = open(fdpath, O_RDONLY | O_CLOEXEC);
+	free(fdpath);
+	if (newfd < 0)
+		goto error;
+
+	close(memfd);
+	memfd = newfd;
+#endif
+	return memfd;
+
+error:
+	close(memfd);
+	return -EIO;
+}
+
+int ensure_cloned_binary(void)
+{
+	int execfd;
+	char **argv = NULL, **envp = NULL;
+
+	/* Check that we're not self-cloned, and if we are then bail. */
+	int cloned = is_self_cloned();
+	if (cloned > 0 || cloned == -ENOTRECOVERABLE)
+		return cloned;
+
+	if (fetchve(&argv, &envp) < 0)
+		return -EINVAL;
+
+	execfd = clone_binary();
+	if (execfd < 0)
+		return -EIO;
+
+	fexecve(execfd, argv, envp);
+	return -ENOEXEC;
+}
+diff --git a/libcontainer/nsenter/nsexec.c b/libcontainer/nsenter/nsexec.c
+index 28269dfc..7750af35 100644
+--- a/libcontainer/nsenter/nsexec.c
+++ b/libcontainer/nsenter/nsexec.c
+@@ -534,6 +534,9 @@ void join_namespaces(char *nslist)
+ 	free(namespaces);
+ }
+ 
+/* Defined in cloned_binary.c. */
+extern int ensure_cloned_binary(void);
+
+ void nsexec(void)
+ {
+ 	int pipenum;
+@@ -549,6 +552,14 @@ void nsexec(void)
+ 	if (pipenum == -1)
+ 		return;
+ 
+	/*
+	 * We need to re-exec if we are not in a cloned binary. This is necessary
+	 * to ensure that containers won't be able to access the host binary
+	 * through /proc/self/exe. See CVE-2019-5736.
+	 */
+	if (ensure_cloned_binary() < 0)
+		bail("could not ensure we are a cloned binary");
+
+ 	/* Parse all of the netlink configuration. */
+ 	nl_parse(pipenum, &config);
+ 
+-- 
+2.17.1
+
--- a/buildroot-external/patches/runc/0050-nsexec-CVE-2019-5736-avoid-parsing-environ.patch
+++ b/buildroot-external/patches/runc/0050-nsexec-CVE-2019-5736-avoid-parsing-environ.patch
@@ -0,0 +1,106 @@
+From bb7d8b1f41f7bf0399204d54009d6da57c3cc775 Mon Sep 17 00:00:00 2001
+From: Christian Brauner <christian.brauner@ubuntu.com>
+Date: Thu, 14 Feb 2019 15:56:26 +0100
+Subject: [PATCH 50/50] nsexec (CVE-2019-5736): avoid parsing environ
+
+My first attempt to simplify this and make it less costly focussed on
+the way constructors are called. I was under the impression that the ELF
+specification mandated that arg, argv, and actually even envp need to be
+passed to functions located in the .init_arry section (aka
+"constructors"). Actually, the specifications is (cf. [2]):
+
+SHT_INIT_ARRAY
+This section contains an array of pointers to initialization functions,
+as described in ``Initialization and Termination Functions'' in Chapter
+5. Each pointer in the array is taken as a parameterless procedure with
+a void return.
+
+which means that this becomes a libc specific decision. Glibc passes
+down those args, musl doesn't. So this approach can't work. However, we
+can at least remove the environment parsing part based on POSIX since
+[1] mandates that there should be an environ variable defined in
+unistd.h which provides access to the environment. See also the relevant
+Open Group specification [1].
+
+[1]: http://pubs.opengroup.org/onlinepubs/9699919799/
+[2]: http://www.sco.com/developers/gabi/latest/ch4.sheader.html#init_array
+
+Fixes: CVE-2019-5736
+Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
+---
+ libcontainer/nsenter/cloned_binary.c | 23 ++++++++++-------------
+ 1 file changed, 10 insertions(+), 13 deletions(-)
+
+diff --git a/libcontainer/nsenter/cloned_binary.c b/libcontainer/nsenter/cloned_binary.c
+index c8a42c23..c97dfcb7 100644
+--- a/libcontainer/nsenter/cloned_binary.c
+++ b/libcontainer/nsenter/cloned_binary.c
+@@ -169,31 +169,25 @@ static int parse_xargs(char *data, int data_length, char ***output)
+ }
+ 
+ /*
+- * "Parse" out argv and envp from /proc/self/cmdline and /proc/self/environ.
+ * "Parse" out argv from /proc/self/cmdline.
+  * This is necessary because we are running in a context where we don't have a
+  * main() that we can just get the arguments from.
+  */
+-static int fetchve(char ***argv, char ***envp)
+static int fetchve(char ***argv)
+ {
+-	char *cmdline = NULL, *environ = NULL;
+-	size_t cmdline_size, environ_size;
+	char *cmdline = NULL;
+	size_t cmdline_size;
+ 
+ 	cmdline = read_file("/proc/self/cmdline", &cmdline_size);
+ 	if (!cmdline)
+ 		goto error;
+-	environ = read_file("/proc/self/environ", &environ_size);
+-	if (!environ)
+-		goto error;
+ 
+ 	if (parse_xargs(cmdline, cmdline_size, argv) <= 0)
+ 		goto error;
+-	if (parse_xargs(environ, environ_size, envp) <= 0)
+-		goto error;
+ 
+ 	return 0;
+ 
+ error:
+-	free(environ);
+ 	free(cmdline);
+ 	return -EINVAL;
+ }
+@@ -246,23 +240,26 @@ error:
+ 	return -EIO;
+ }
+ 
+/* Get cheap access to the environment. */
+extern char **environ;
+
+ int ensure_cloned_binary(void)
+ {
+ 	int execfd;
+-	char **argv = NULL, **envp = NULL;
+	char **argv = NULL;
+ 
+ 	/* Check that we're not self-cloned, and if we are then bail. */
+ 	int cloned = is_self_cloned();
+ 	if (cloned > 0 || cloned == -ENOTRECOVERABLE)
+ 		return cloned;
+ 
+-	if (fetchve(&argv, &envp) < 0)
+	if (fetchve(&argv) < 0)
+ 		return -EINVAL;
+ 
+ 	execfd = clone_binary();
+ 	if (execfd < 0)
+ 		return -EIO;
+ 
+-	fexecve(execfd, argv, envp);
+	fexecve(execfd, argv, environ);
+ 	return -ENOEXEC;
+ }
+-- 
+2.17.1
+
--- a/buildroot-external/rootfs-overlay/etc/systemd/coredump.conf
+++ b/buildroot-external/rootfs-overlay/etc/systemd/coredump.conf
@@ -0,0 +1,3 @@
+[Coredump]
+Storage=none
+ProcessSizeMax=0
--- a/buildroot-external/rootfs-overlay/etc/systemd/system/docker.service.d/hassos.conf
+++ b/buildroot-external/rootfs-overlay/etc/systemd/system/docker.service.d/hassos.conf
@@ -1,5 +1,5 @@
 [Unit]
-RequiresMountsFor=/etc/docker /var/lib/docker
+RequiresMountsFor=/etc/docker /mnt/data

 [Service]
 ExecStart=
--- a/buildroot-external/rootfs-overlay/usr/sbin/hassos-supervisor
+++ b/buildroot-external/rootfs-overlay/usr/sbin/hassos-supervisor
@@ -23,7 +23,7 @@ runSupervisor() {

    # shellcheck disable=SC2086
    docker container run --name hassos_supervisor \
-        --security-opt apparmor="${APPARMOR}" \
+        --privileged --security-opt apparmor="${APPARMOR}" \
        -v /var/run/docker.sock:/var/run/docker.sock \
        -v /var/run/dbus:/var/run/dbus \
        -v /etc/machine-id:/etc/machine-id:ro \
--- a/buildroot-patches/0001-docker-containerd-bump-to-v1.2.4.patch
+++ b/buildroot-patches/0001-docker-containerd-bump-to-v1.2.4.patch
@@ -1,7 +1,7 @@
 From 0484ba124482874b9612563887b22ce454026f7e Mon Sep 17 00:00:00 2001
 From: Pascal Vizeli <pvizeli@syshack.ch>
 Date: Mon, 26 Nov 2018 14:38:19 +0000
-Subject: [PATCH 1/1] docker-containerd: bump to v1.2.0
+Subject: [PATCH 1/1] docker-containerd: bump to v1.2.4

 Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch>
 ---
@@ -16,7 +16,7 @@ index a530873..71cd5e5 100644
@@ -1,3 +1,3 @@
 # Computed locally
 -sha256	a946f4614d92d60361213ef18deab04ee73599e4567f1ff26f7a72841afe4fa2	docker-containerd-v1.1.3.tar.gz
-+sha256	8565a655345f3db2f7b78b77a2cd3103895229aa44cd0e4c710ba3559e344b5a	docker-containerd-v1.2.0.tar.gz
+sha256	5b23bd330f9e59e14f7dced9e3106f37f5b552e527bb6c1503001d90e853c155	docker-containerd-v1.2.4.tar.gz
 sha256  4bbe3b885e8cd1907ab4cf9a41e862e74e24b5422297a4f2fe524e6a30ada2b4	LICENSE
 diff --git a/package/docker-containerd/docker-containerd.mk b/package/docker-containerd/docker-containerd.mk
 index 121ef09..36f4a25 100644
@@ -27,7 +27,7 @@ index 121ef09..36f4a25 100644
 ################################################################################
 
 -DOCKER_CONTAINERD_VERSION = v1.1.3
-+DOCKER_CONTAINERD_VERSION = v1.2.0
+DOCKER_CONTAINERD_VERSION = v1.2.4
 DOCKER_CONTAINERD_SITE = $(call github,containerd,containerd,$(DOCKER_CONTAINERD_VERSION))
 DOCKER_CONTAINERD_LICENSE = Apache-2.0
 DOCKER_CONTAINERD_LICENSE_FILES = LICENSE
--- a/buildroot-patches/0005-Pump-raspberry-pi-firmware-for-kernel-4.14.patch
+++ b/buildroot-patches/0005-Pump-raspberry-pi-firmware-for-kernel-4.14.patch
@@ -16,7 +16,7 @@ index 4854deae03..3a9f21e877 100644
@@ -1,2 +1,2 @@
 # Locally computed
 -sha256 57c56e9e41a2d9b1ce660aa7887db5c4b44f768fc63c6b6ef1d2fe460a090d85 rpi-firmware-fbad6408c4596d3d671736ee0571aae444f24e68.tar.gz
-+sha256 8939476badeb1d28adc60b46315f1511cd83c1942fbde5ef2e04c4f1b9591da6 rpi-firmware-91e955e3786a807f4af8ae7e4a4bbf9ec470b843.tar.gz
+sha256 9a34ccc4a51695a33206cc6c8534f615ba5a30fcbce5fa3add400ecc6b80ad8a rpi-firmware-83977fe3b6ef54c1d29c83b0a778d330f523441f.tar.gz
 diff --git a/package/rpi-firmware/rpi-firmware.mk b/package/rpi-firmware/rpi-firmware.mk
 index eab4c5d307..cb2e9d6cd8 100644
 --- a/package/rpi-firmware/rpi-firmware.mk
@@ -26,7 +26,7 @@ index eab4c5d307..cb2e9d6cd8 100644
 ################################################################################
 
 -RPI_FIRMWARE_VERSION = fbad6408c4596d3d671736ee0571aae444f24e68
-+RPI_FIRMWARE_VERSION = 91e955e3786a807f4af8ae7e4a4bbf9ec470b843
+RPI_FIRMWARE_VERSION = 83977fe3b6ef54c1d29c83b0a778d330f523441f
 RPI_FIRMWARE_SITE = $(call github,raspberrypi,firmware,$(RPI_FIRMWARE_VERSION))
 RPI_FIRMWARE_LICENSE = BSD-3-Clause
 RPI_FIRMWARE_LICENSE_FILES = boot/LICENCE.broadcom
--- a/buildroot/package/docker-containerd/docker-containerd.hash
+++ b/buildroot/package/docker-containerd/docker-containerd.hash
@@ -1,3 +1,3 @@
 # Computed locally
-sha256	8565a655345f3db2f7b78b77a2cd3103895229aa44cd0e4c710ba3559e344b5a	docker-containerd-v1.2.0.tar.gz
+sha256	5b23bd330f9e59e14f7dced9e3106f37f5b552e527bb6c1503001d90e853c155	docker-containerd-v1.2.4.tar.gz
 sha256  4bbe3b885e8cd1907ab4cf9a41e862e74e24b5422297a4f2fe524e6a30ada2b4	LICENSE
--- a/buildroot/package/docker-containerd/docker-containerd.mk
+++ b/buildroot/package/docker-containerd/docker-containerd.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################

-DOCKER_CONTAINERD_VERSION = v1.2.0
+DOCKER_CONTAINERD_VERSION = v1.2.4
 DOCKER_CONTAINERD_SITE = $(call github,containerd,containerd,$(DOCKER_CONTAINERD_VERSION))
 DOCKER_CONTAINERD_LICENSE = Apache-2.0
 DOCKER_CONTAINERD_LICENSE_FILES = LICENSE
--- a/buildroot/package/rpi-firmware/rpi-firmware.hash
+++ b/buildroot/package/rpi-firmware/rpi-firmware.hash
@@ -1,2 +1,2 @@
 # Locally computed
-sha256 8939476badeb1d28adc60b46315f1511cd83c1942fbde5ef2e04c4f1b9591da6 rpi-firmware-91e955e3786a807f4af8ae7e4a4bbf9ec470b843.tar.gz
+sha256 9a34ccc4a51695a33206cc6c8534f615ba5a30fcbce5fa3add400ecc6b80ad8a rpi-firmware-83977fe3b6ef54c1d29c83b0a778d330f523441f.tar.gz
--- a/buildroot/package/rpi-firmware/rpi-firmware.mk
+++ b/buildroot/package/rpi-firmware/rpi-firmware.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################

-RPI_FIRMWARE_VERSION = 91e955e3786a807f4af8ae7e4a4bbf9ec470b843
+RPI_FIRMWARE_VERSION = 83977fe3b6ef54c1d29c83b0a778d330f523441f
 RPI_FIRMWARE_SITE = $(call github,raspberrypi,firmware,$(RPI_FIRMWARE_VERSION))
 RPI_FIRMWARE_LICENSE = BSD-3-Clause
 RPI_FIRMWARE_LICENSE_FILES = boot/LICENCE.broadcom
Author	SHA1	Message	Date
Pascal Vizeli	ef6acf30ed	Supervisor: update Hass.io to 150	2019-03-21 11:22:08 +00:00
Pascal Vizeli	f0d1521138	OS: Enable systemd-coredump (#382 )	2019-03-20 17:11:43 +00:00
Pascal Vizeli	2719ef7193	Bump version 2.11	2019-03-20 10:31:11 +00:00
Pascal Vizeli	7f0c797d94	Supervisor: update Hass.io to 149	2019-03-20 10:29:45 +00:00
Pascal Vizeli	f2895f47a2	Add support for privileged supervisor (#381 )	2019-03-20 10:28:51 +00:00
Pascal Vizeli	bc3af3e4b4	Update CLI v9 with armv7 (#379 ) * Update CLI v9 with armv7 * Update rpi2_defconfig	2019-03-20 10:28:35 +00:00
Pascal Vizeli	25e521819e	OS: Fix boot problem (#370 ) * OS: Fix boot problem * Update var-lib-docker.mount * Update var-lib-docker.mount * Update var-lib-docker.mount	2019-03-20 10:25:32 +00:00
Pascal Vizeli	25654151d6	OS: Disable coredump (#365 )	2019-03-20 10:25:15 +00:00
Pascal Vizeli	744306d6ff	Bump version 2.10	2019-02-21 22:30:32 +00:00
Pascal Vizeli	9d7f57b527	Supervisor: update Hass.io to 145	2019-02-21 22:29:34 +00:00
Pascal Vizeli	5173b3d130	Rpi: update kernel 4.14.98 `42f1859` (#360 ) * Rpi: update kernel 4.14.98 * Update kernel	2019-02-21 22:29:10 +00:00
Pascal Vizeli	a9a5ba42ca	Fix cve-2019-5736 (#359 ) * Fix CVE-2019-5736 * Fix cve-2019-5736	2019-02-21 22:28:53 +00:00
TonyApuzzo	844c8e6fef	Odroid: Fix ring buffer errors by applying (#355 )	2019-02-21 22:28:41 +00:00