CLI: Update to version 7

Supervisor: Update to version 131
Raspberry: Fix power issue
2018-09-24 14:32:23 +00:00 · 2018-09-24 14:31:54 +00:00 · 2018-09-24 16:30:35 +02:00 · 2018-09-10 10:27:08 +00:00 · 2018-09-10 10:25:22 +00:00 · 2018-09-10 10:24:57 +00:00
20 changed files with 76 additions and 40 deletions
--- a/Documentation/boards/raspberrypi.md
+++ b/Documentation/boards/raspberrypi.md
@@ -10,6 +10,10 @@ Supported Hardware:
 | Raspberry Pi 2 B | rpi2 |
 | Raspberry Pi 3 B/B+ | rpi3 / rpi3-64 |

+## Limitation 64bit
+
+The 64bit version is under development by RPi-Team. It work very nice but it could have some impacts. Actual we see that the SDcard access with ext4 are a bit slower than on 32bit.
+
 ## Serial console

 For access to terminal over serial console, add `console=ttyAMA0,115200` to `cmdline.txt` and `enable_uart=1` into `config.txt`.
--- a/Documentation/kernel.md
+++ b/Documentation/kernel.md
@@ -0,0 +1,7 @@
+
+# Kernel Version
+
+| Board | Version |
+|-------|---------|
+| Open Virtual Applicance | 4.14.67 |
+| Raspberry Pi | 4.14.66 |
--- a/Documentation/network.md
+++ b/Documentation/network.md
@@ -1,11 +1,10 @@
 # Network

-HassOS uses NetworkManager to control the host network. In future releases, you can set up the configuration using the API/UI.
-Currently only manual configuration using NetworkManager connection files is supported. Without a configuration file, the device will use DHCP by default. These network connection files can be placed on a USB drive as described in [Configuration][configuration-usb].
+HassOS uses NetworkManager to control the host network. In future releases, you will be able to set up the configuration using the API/UI. Currently only manual configuration using NetworkManager connection files is supported. Without a configuration file, the device will use DHCP by default. These network connection files can be placed on a USB drive as described in [Configuration][configuration-usb].

 ## Configuration Examples

-You can look also into [Official Manual][keyfile] or there are a lot of examples accross internet. The system is read only, if you not want change the IP address every boot, you should set the uuid property with a generic [UUID4][uuid].
+You can also read the [Official Manual][keyfile] or there are a lot of examples accross internet. The system is read only, if you don't want the IP address to change every boot, you should set the uuid property with a generic [UUID4][uuid]. Inside the `network` folder create the file `my-network` and add the appropriate contents below:

 ### Default

@@ -46,11 +45,11 @@ id=hassos-network
 uuid=72111c67-4a5d-4d5c-925e-f8ee26efb3c3
 type=802-11-wireless

-[wifi]
+[802-11-wireless]
 mode=infrastructure
 ssid=MY_SSID

-[wifi-security]
+[802-11-wireless-security]
 auth-alg=open
 key-mgmt=wpa-psk
 psk=MY_WLAN_SECRED_KEY
--- a/buildroot-external/board/ova/kernel.config
+++ b/buildroot-external/board/ova/kernel.config
@@ -1 +1,17 @@
-CONFIG_EFI_STUB=y
+CONFIG_EFI_STUB=y
+
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_SIMPLE=m
+CONFIG_USB_SERIAL_CP210X=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_ACM=m
+
+CONFIG_VIRTIO=y
+CONFIG_VIRTIO_PCI=y
+CONFIG_VIRTIO_NET=y
+CONFIG_VIRTIO_BALLOON=m
+CONFIG_VIRTIO_INPUT=m
+CONFIG_VIRTIO_BLK=m
+
--- a/buildroot-external/board/raspberrypi/kernel.config
+++ b/buildroot-external/board/raspberrypi/kernel.config
@@ -0,0 +1 @@
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
--- a/buildroot-external/board/raspberrypi/rpi3-64/uboot-boot.sh
+++ b/buildroot-external/board/raspberrypi/rpi3-64/uboot-boot.sh
@@ -11,7 +11,8 @@ setenv bootargs_b "root=PARTUUID=a3ec664e-32ce-4665-95ea-7ae90ce9aa20 rootfstype

 # Preserve origin bootargs
 setenv bootargs_rpi
-fdt addr ${fdt_addr}
+setenv fdt_org ${fdt_addr}
+fdt addr ${fdt_org}
 fdt get value bootargs_rpi /chosen bootargs

 setenv bootargs
@@ -35,6 +36,7 @@ for BOOT_SLOT in "${BOOT_ORDER}"; do
  fi
 done

+setenv fdt_addr
 if test -n "${bootargs}"; then
  saveenv
 else
@@ -48,7 +50,7 @@ fi
 echo "Loading kernel"
 run load_kernel
 echo " Starting kernel"
-booti ${kernel_addr_r} - ${fdt_addr}
+booti ${kernel_addr_r} - ${fdt_org}

 echo "Fails on boot"
 reset
--- a/buildroot-external/board/raspberrypi/uboot-boot.sh
+++ b/buildroot-external/board/raspberrypi/uboot-boot.sh
@@ -11,7 +11,8 @@ setenv bootargs_b "root=PARTUUID=a3ec664e-32ce-4665-95ea-7ae90ce9aa20 rootfstype

 # Preserve origin bootargs
 setenv bootargs_rpi
-fdt addr ${fdt_addr}
+setenv fdt_org ${fdt_addr}
+fdt addr ${fdt_org}
 fdt get value bootargs_rpi /chosen bootargs

 setenv bootargs
@@ -35,6 +36,7 @@ for BOOT_SLOT in "${BOOT_ORDER}"; do
  fi
 done

+setenv fdt_addr
 if test -n "${bootargs}"; then
  saveenv
 else
@@ -48,7 +50,7 @@ fi
 echo "Loading kernel"
 run load_kernel
 echo " Starting kernel"
-bootz ${kernel_addr_r} - ${fdt_addr}
+bootz ${kernel_addr_r} - ${fdt_org}

 echo "Fails on boot"
 reset
--- a/buildroot-external/bootloader/barebox/boot/system0
+++ b/buildroot-external/bootloader/barebox/boot/system0
@@ -3,6 +3,6 @@
 global linux.bootargs.dyn.root="root=PARTUUID=8d3d53e3-6d49-4c38-8349-aff6859e82fd rootfstype=squashfs ro"

 mkdir -p /mnt/system
-mount -t ext4 /dev/disk0.hassos-kernel0 /mnt/system
+mount -t ext4 /dev/disk*.hassos-kernel0 /mnt/system

 global bootm.image="/mnt/system/bzImage"
--- a/buildroot-external/bootloader/barebox/boot/system1
+++ b/buildroot-external/bootloader/barebox/boot/system1
@@ -3,6 +3,6 @@
 global linux.bootargs.dyn.root="root=PARTUUID=a3ec664e-32ce-4665-95ea-7ae90ce9aa20 rootfstype=squashfs ro"

 mkdir -p /mnt/system
-mount -t ext4 /dev/disk0.hassos-kernel1 /mnt/system
+mount -t ext4 /dev/disk*.hassos-kernel1 /mnt/system

 global bootm.image="/mnt/system/bzImage"
--- a/buildroot-external/configs/ova_defconfig
+++ b/buildroot-external/configs/ova_defconfig
@@ -18,7 +18,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/board/ova/post-image.s
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/ova"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.14.41"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.14.67"
 BR2_LINUX_KERNEL_DEFCONFIG="x86_64"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel.config $(BR2_EXTERNAL_HASSOS_PATH)/board/ova/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
@@ -77,12 +77,12 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/amd64-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="115"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="131"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/qemux86-64-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/amd64-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="6"
+BR2_PACKAGE_HASSOS_CLI_VERSION="7"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"
--- a/buildroot-external/configs/rpi0_w_defconfig
+++ b/buildroot-external/configs/rpi0_w_defconfig
@@ -21,9 +21,9 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi0-
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
 BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="db81c14ce9fbd705c2d3936edecbc6036ace6c05"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="f6da082a790f857d5163ac99357beae6b59f1eb5"
 BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi"
-BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel.config"
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2708-rpi-0-w"
@@ -86,12 +86,12 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/armhf-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="115"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="131"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/raspberrypi-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/armhf-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="6"
+BR2_PACKAGE_HASSOS_CLI_VERSION="7"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"
--- a/buildroot-external/configs/rpi2_defconfig
+++ b/buildroot-external/configs/rpi2_defconfig
@@ -21,9 +21,9 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi2"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
 BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="db81c14ce9fbd705c2d3936edecbc6036ace6c05"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="f6da082a790f857d5163ac99357beae6b59f1eb5"
 BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
-BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel.config"
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2709-rpi-2-b"
@@ -85,12 +85,12 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/armhf-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="115"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="131"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/raspberrypi2-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/armhf-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="6"
+BR2_PACKAGE_HASSOS_CLI_VERSION="7"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"
--- a/buildroot-external/configs/rpi3_64_defconfig
+++ b/buildroot-external/configs/rpi3_64_defconfig
@@ -21,9 +21,9 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi3-
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
 BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="db81c14ce9fbd705c2d3936edecbc6036ace6c05"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="f6da082a790f857d5163ac99357beae6b59f1eb5"
 BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi3"
-BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel.config"
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="broadcom/bcm2710-rpi-3-b broadcom/bcm2837-rpi-3-b broadcom/bcm2710-rpi-3-b-plus"
@@ -86,12 +86,12 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/aarch64-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="115"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="131"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/raspberrypi3-64-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/aarch64-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="6"
+BR2_PACKAGE_HASSOS_CLI_VERSION="7"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"
--- a/buildroot-external/configs/rpi3_defconfig
+++ b/buildroot-external/configs/rpi3_defconfig
@@ -21,9 +21,9 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi3"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
 BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="db81c14ce9fbd705c2d3936edecbc6036ace6c05"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="f6da082a790f857d5163ac99357beae6b59f1eb5"
 BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
-BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel.config"
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2710-rpi-3-b bcm2710-rpi-3-b-plus bcm2710-rpi-cm3"
@@ -86,12 +86,12 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/armhf-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="115"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="131"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/raspberrypi3-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/armhf-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="6"
+BR2_PACKAGE_HASSOS_CLI_VERSION="7"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"
--- a/buildroot-external/configs/rpi_defconfig
+++ b/buildroot-external/configs/rpi_defconfig
@@ -21,9 +21,9 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
 BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="db81c14ce9fbd705c2d3936edecbc6036ace6c05"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="f6da082a790f857d5163ac99357beae6b59f1eb5"
 BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi"
-BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel.config"
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2708-rpi-b bcm2708-rpi-b-plus bcm2708-rpi-cm"
@@ -85,12 +85,12 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/armhf-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="115"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="131"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/raspberrypi-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/armhf-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="6"
+BR2_PACKAGE_HASSOS_CLI_VERSION="7"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"
--- a/buildroot-external/info
+++ b/buildroot-external/info
@@ -1,5 +1,5 @@
 VERSION_MAJOR=1
-VERSION_BUILD=6
+VERSION_BUILD=11

 HASSOS_NAME="HassOS"
 HASSOS_ID="hassos"
--- a/buildroot-external/misc/rauc-hook
+++ b/buildroot-external/misc/rauc-hook
@@ -20,4 +20,9 @@ if [ -L /var/lib/systemd/timesync ]; then
    rm -f /var/lib/systemd/timesync
 fi

+# u-boot first stage device tree
+if [ -e /usr/sbin/fw_setenv ]; then
+    fw_setenv fdt_addr
+fi
+
 exit 0
--- a/buildroot-patches/0006-Pump-raspberry-pi-firmware-for-kernel-4.14.patch
+++ b/buildroot-patches/0006-Pump-raspberry-pi-firmware-for-kernel-4.14.patch
@@ -16,7 +16,7 @@ index 4854deae03..3a9f21e877 100644
@@ -1,2 +1,2 @@
 # Locally computed
 -sha256 ea451834e20136d249661e0ed7d1fdfa309249d233a387f44dd6c3b746a454c6 rpi-firmware-36f991382326907419f64917624427e59fd8e4a0.tar.gz
-+sha256 25c04d9e5b0d9dfe3145784c983460b6e47f370c2082ced45392882d55932b8a rpi-firmware-418b77e24476a98aba4ee33942cc5321e6698ce4.tar.gz
+sha256 a72ddbd1a4e96ca508fc14d0c31784ec119b68edcab2929c9779ae618db15388 rpi-firmware-200c2f4dd54b2048b5dcb8661ea3f232beb7d81e.tar.gz
 diff --git a/package/rpi-firmware/rpi-firmware.mk b/package/rpi-firmware/rpi-firmware.mk
 index eab4c5d307..cb2e9d6cd8 100644
 --- a/package/rpi-firmware/rpi-firmware.mk
@@ -26,7 +26,7 @@ index eab4c5d307..cb2e9d6cd8 100644
 ################################################################################
 
 -RPI_FIRMWARE_VERSION = 36f991382326907419f64917624427e59fd8e4a0
-+RPI_FIRMWARE_VERSION = 418b77e24476a98aba4ee33942cc5321e6698ce4
+RPI_FIRMWARE_VERSION = 200c2f4dd54b2048b5dcb8661ea3f232beb7d81e
 RPI_FIRMWARE_SITE = $(call github,raspberrypi,firmware,$(RPI_FIRMWARE_VERSION))
 RPI_FIRMWARE_LICENSE = BSD-3-Clause
 RPI_FIRMWARE_LICENSE_FILES = boot/LICENCE.broadcom
--- a/buildroot/package/rpi-firmware/rpi-firmware.hash
+++ b/buildroot/package/rpi-firmware/rpi-firmware.hash
@@ -1,2 +1,2 @@
 # Locally computed
-sha256 25c04d9e5b0d9dfe3145784c983460b6e47f370c2082ced45392882d55932b8a rpi-firmware-418b77e24476a98aba4ee33942cc5321e6698ce4.tar.gz
+sha256 a72ddbd1a4e96ca508fc14d0c31784ec119b68edcab2929c9779ae618db15388 rpi-firmware-200c2f4dd54b2048b5dcb8661ea3f232beb7d81e.tar.gz
--- a/buildroot/package/rpi-firmware/rpi-firmware.mk
+++ b/buildroot/package/rpi-firmware/rpi-firmware.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################

-RPI_FIRMWARE_VERSION = 418b77e24476a98aba4ee33942cc5321e6698ce4
+RPI_FIRMWARE_VERSION = 200c2f4dd54b2048b5dcb8661ea3f232beb7d81e
 RPI_FIRMWARE_SITE = $(call github,raspberrypi,firmware,$(RPI_FIRMWARE_VERSION))
 RPI_FIRMWARE_LICENSE = BSD-3-Clause
 RPI_FIRMWARE_LICENSE_FILES = boot/LICENCE.broadcom
Author	SHA1	Message	Date
Pascal Vizeli	9af71ce9ea	CLI: Update to version 7	2018-09-24 14:32:23 +00:00
Pascal Vizeli	e3432c373f	Supervisor: Update to version 131	2018-09-24 14:31:54 +00:00
Pascal Vizeli	569a581445	Raspberry: Fix power issue	2018-09-24 16:30:35 +02:00
Pascal Vizeli	92dbff76e1	OS: bump version 1.11	2018-09-10 10:27:08 +00:00
Johannes Truschnigg	3ab6dd4cfe	Do not assume index 0 for boot medium (#188 ) When booting the HassOS VMDK appliance disk image on QEMU with OVMF UEFI firmware, barebox numbers devices differently from other environments. This patch makes the barebox `sh` implementation expand a pathname wildcard at runtime, so that assigned disk indices != 0 will also work. This fix introduces a potential (but most likely irrelevant) bug/problem: If there is more than one disk connected to the system with a matching name assigned, the wildcard will expand to two or more pathnames, breaking the resulting `mount` command.	2018-09-10 10:25:22 +00:00
Pascal Vizeli	a0b432e072	Supervisor: Update to version 130	2018-09-10 10:24:57 +00:00
Pascal Vizeli	4fd8594af5	Raspberrypi: Performance on Raspberry Pi due to governor (#194 ) * Raspberrypi: Performance on Raspberry Pi due to governor * Update rpi0_w_defconfig * Update rpi2_defconfig * Update rpi3_64_defconfig * Update rpi3_defconfig * Update rpi_defconfig	2018-09-10 12:22:33 +02:00
Pascal Vizeli	115dbd0491	OS: bump version 1.10	2018-08-27 16:00:21 +00:00
Pascal Vizeli	6fdd9afe74	Documentation: Update Kernel infos	2018-08-27 15:59:47 +00:00
Pascal Vizeli	523996658b	OVA: update kernel 4.14.67	2018-08-27 15:59:08 +00:00
Pascal Vizeli	6800ee84dc	Raspberry: update kernel 4.14.66	2018-08-27 15:58:52 +00:00
Pascal Vizeli	d36d3557cb	Raspberry: Bump Firmware for 4.14.66	2018-08-27 15:58:28 +00:00
Pascal Vizeli	b87b4f240a	Supervisor: Update to version 127	2018-08-27 15:57:58 +00:00
Pascal Vizeli	51882ad715	OS: Update supervisor 123	2018-08-03 23:02:04 +00:00
Pascal Vizeli	20004ca451	OS: Bump version 1.9	2018-08-03 12:32:07 +00:00
Pascal Vizeli	ac0d1ed9af	rpi: Update kernel & firmware 4.14.58 (#139 )	2018-08-03 12:31:33 +00:00
Pascal Vizeli	2e9f5d04e2	OVA: Update kernel to 4.14.59 (#138 )	2018-08-03 12:31:14 +00:00
Pascal Vizeli	0ecf4cb293	OVA: Add support for Aeotec Zstick (#132 )	2018-08-03 12:30:59 +00:00
Pascal Vizeli	02126e0236	OS: Update supervisor 122	2018-08-03 12:30:41 +00:00
Pascal Vizeli	59cb3b4844	fix wireless settings (#124 )	2018-07-19 08:53:46 +00:00
Pascal Vizeli	ee6399a8ba	OVA: Fix serial support (#119 ) OVA: Fix serial support	2018-07-18 14:07:34 +00:00
Pascal Vizeli	1541fcab8d	Bump version 1.8	2018-07-18 12:54:21 +00:00
Pascal Vizeli	93dcc4a152	Add support for VIRTIO (#118 ) * Add support for VIRTIO * Update kernel.config	2018-07-18 12:43:19 +00:00
Pascal Vizeli	54dd3e3219	Allow more USB serial device on OVA (#115 ) * Allow more USB serial device on OVA * Update kernel.config	2018-07-18 12:43:05 +00:00
Robin	dca52c3026	Update network.md (#114 ) Clarify that you are editing the file `my-network` which is what I understand from https://www.home-assistant.io/hassio/installation/	2018-07-18 12:42:00 +00:00
Pascal Vizeli	bfcbe120b4	Bump version 1.7	2018-07-15 19:43:44 +00:00
Pascal Vizeli	38a3af6a8d	Fix prevent device tree on rpi (#107 ) * Fix prevent device tree * Update uboot-boot.sh * Update rauc-hook * Update rauc-hook	2018-07-15 19:43:18 +00:00
Pascal Vizeli	ed8f2489e0	Update OVA kernel to 4.14.55 (#108 )	2018-07-15 19:43:04 +00:00
Pascal Vizeli	fa05217ef2	Raspberry Pi node of 64bit (#103 )	2018-07-14 09:09:15 +00:00
DubhAd	f85402d781	Grammar and language tweaks (#101 ) Some grammar and language tweaks	2018-07-14 09:09:05 +00:00