* Add ODROID-M1 board support
* Add Rockchip kernel config for ODROID-M1
Kernel defconfig for Rockchip is based on Armbian kernel defconfig
from config/kernel/linux-rk3568-odroid-edge.config (git hash
95c829f9e664).
* Add U-Boot/Kernel patches
* Add Rockchip blob support
Add package which provides Rockchip TPL and ATF firmware binaries.
* Use latest U-Boot for ODROID-M1
* Fix Rockchip blob support
* Update defconfig
* Use GPT by default
* Create uboot partition to support non-recovery boot
* Enable eMMC boot in U-Boot SPL
* Drop unnecessary mmc device selection
Distro boot already activates the right mmc device. The extra selection
seems to actually cause problems for eMMC boot.
* Make sure driver for eMMC is built-in
* Use odroid-m1 as Supervisor machine
* Add ODROID-M1 to CI pipeline and issue template
* Bump to Linux 6.1.16
* Update config for Buildroot 2023.02
* Use Buildroot's version of the rtl8821cu package
Buildroot provides a newer driver for the RTL8821CU based chipsets
provided by https://github.com/morrownr/8821cu-20210118.
* Pass argument when verifying partition table
This also avoids running into a segmentation fault in the current
version of sgdisk.
* Remove obsolte GRUB2/NetworkManager patches
* Bump buildroot
* buildroot 90aa1a6daa...4832525e6c (4596):
> package/runc: add support for CGroup device permission updates
> package/network-manager: fix build with -Dmodem_manager=false
> package/dbus-broker: bump to release 33
> package/iptables: Allow to use iptables with nf_tables backend
> package/brcmfmac_sdio-firmware-rpi: bump to latest version
> package/linux-firmware: Deploy fewer Intel WiFi 22000 series variants
> package/linux-firmware: Add more Intel WiFi 22000 series variants
> package/linux-firmware: Add Broadcom BNX2 firmware
> package/rpi-firmware: bump version to 1.20230106
> Update for 2023.02-rc2
* Use Ubuntu 22.04 for CI checks
* Bump xe-guest-utilities to 7.33.0
* Remove unnecessary shellcheck ignore for xe-guest-utilities
* Address new buildroot check-packages issues
* Linux: Update kernel 6.1.12
* Update generic_raw_uart to build with Linux 6.1
* Update Realtek rtl8821cu/rtl88x2bu to build with Linux 6.1
* Bump buildroot
* buildroot 43f82f01b9...90aa1a6daa (1):
> rtl8812au-aircrack-ng: bump to latest rev d98018
* Fix eq3_char_loop to build with Linux 6.1
* rtl8821cu: make sure -Werror is disabled for the kernel build
* generic_raw_uart: make sure -Werror is disabled for the kernel build
* Load container images descending by size
Loading container images using docker load seems to require more space
at load time (which gets freed after loading). Loading the largest
container first avoids running out of space.
* Disable real-time scheduling
It seems that Linux' cgroup v2 currenlty does not support RT scheduling.
* Remove Supervisor RT support flag
With CGroups v2 we can no longer support CPU resource allocation for
realtime scheduling.
* Bump OS Agent to 1.3.0 for CGroups v2 support
* Use upstream Linux driver for Bluetooth on ASUS Tinker
* Drop unnecessary Bluetooth initialization systemd service
Bluetooth is now entirely handled by the kernel.
It seems that the GitHub container registry sometimes returns 503
service unavailable temporarily ("Error fetching tags list: invalid status
code from registry 503"). Use skopeo's retry mechanism to try up to 5
times before failing.
The Google Gasket driver has been removed from the main kernels staging
tree between 5.10 and 5.15 development window. Readd Google's
out-of-tree driver to continiue support Google Coral devices.
* Replace bluetooth-bcm43xx with pi-bluetooth Buildroot package
The new pi-bluetooth packages the scripts and systemd service from
the Raspberry distribution package directly:
https://github.com/RPi-Distro/pi-bluetooth
* Update to latest pi-bluetooth service files
* Update busybox configuration to 1.35.0
The new/deleted configurations are generated automatically, no actual
change in this patch.
* Enable busybox xxd command
The xxd tool is useful for conversion in scripts.
* Prevent start erros on Compute Module 4 without WiFi/Bluetooth
* Add tempio host package
tempio is a template helper using Go's template engine and sprig
functions.
* Use tempio to generate rauc manifest
* Use tempio to generate rauc system.conf
* Linux: Update kernel 5.15.25
Use highest available kernel version in Buildroot 2021.08 (5.13)
* Update Hardkernel patches to Linux 5.15
* Update generic-x86-64/ova kernel config/patches for 5.15
* Drop Intel e1000e Sourceforge driver
The driver has been discontinued sometime last year. The main reason the
out-of-tree kernel has been enabled was for support for the i219-V
network chips which meanwhile are supported in mainline.
* updated generic_raw_uart to latest version which comes with dualcopro
support for the HmIP-RFUSB usb rf-sticks by eQ3/ELV.
* remove 99-hmip-rfusb.rules to keep a HmIP-RFUSB device free from being
occupied by the cp210x driver but use the new generic_raw_uart support
instead allowing for advanced dualcopro support for HomeMatic/BidCos-RF
and homematicIP support in parallel.
* Avoid race condition when fetching containers during build
So far only a single builder was active for each architecture. This
toghether with the naming scheme to include architecture/machine name
made sure that an image could only be fetched or used by a single
builder.
However, since most systems are now aarch64, multiple runners are now
active for a single architecture. This makes it necessary to lock
fetching/coping of container images to avoid race conditions.
Use rtl8812au driver provided by buildroot. This uses a newer verison of
the v5.6.4.2 branch which works with newer kernel and seems to be the
recommended branch.
Note: It seems that our buildroot package currently fails to properly
deploy the 88XXau.ko kernel module. Instead of fixing our version, just
move to the buildroot version.
* Bump to Buildroot 2021.08.1
Move to Buildroot 2021.08.1 using the 2021.08.x-haos branch. Some
patches on the previous branch 2021.02.x-haos have been applied upstream
meanwhile. Others required rather trivial rebasing.
This latest Buildroot release brings new versions of the following
components:
- glibc 2.33
- systemd 249.3
- Networkmanager 1.32.2
- BlueZ 5.60
- Docker 20.10.8
The patch "Fix dhcp client" seems not to be necessary anymore. The
directory /var/lib/dhcp seems not in use when NetworkManager invokes
dhclient. It seems the leases which are typically stored in that
directory are managed inside NetworkManager.
* buildroot 2021.08.1..2021.08.x-haos (6)
> package/rpi-firmware: bump version to 1.20210805
> package/rpi-wifi-firmware: bump version to 883b726
> package/linux-firmware: add rtl8761b/rtl8761bu firmware
> package/docker-proxy: bump version to 64b7a4574d14
> package/rpi-firmware: Allow to deploy multiple firmware files
> network-manager: wpa_supplicant
* Bump Raspberry Pi Bluetooth helper scripts
With the update to Buildroot 2021.08.1, the bthelper fails with an error
org.bluez.Error.Busy when trying to power off the device. Presumably this
is a race condition which surfaced due to a change in Bluez 5.60:
348feb005a
Oct 11 14:32:21 homeassistant systemd[1]: Reached target Bluetooth Support.
...
Oct 11 14:32:21 homeassistant bluetoothd[412]: Bluetooth management interface 1.18 initialized
Oct 11 14:32:21 homeassistant systemd[1]: Started Raspberry Pi bluetooth helper.
Oct 11 14:32:21 homeassistant bthelper[417]: Raspberry Pi BDADDR already set
Oct 11 14:32:21 homeassistant bthelper[426]: [58B blob data]
Oct 11 14:32:21 homeassistant bthelper[426]: [59B blob data]
Oct 11 14:32:21 homeassistant bthelper[426]: Failed to set power off: org.bluez.Error.Busy
Oct 11 14:32:21 homeassistant systemd[1]: bthelper@hci0.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 14:32:21 homeassistant systemd[1]: bthelper@hci0.service: Failed with result 'exit-code'.
The latest version of the pi-bluetooth package introduced a sleep before
powering off the device, however, presumably for a different reason:
ae2efdeee8 (diff-609c8a23261988c47afd40be9b012feb1d167de8761c1301e44e1864635c19e3)
Anyways, this latest version seems to also fix the above mentioned race
condition.
Sometimes the first command after starting the Docker daemon container
fails, presumably because the container did not start yet. Wait until
the Docker daemon is ready.
* Use skopeo to download container images
Separate container download from image build. This will allow to share
the downloaded images between multiple builds.
We won't store the Supervisor container with the version tag, just with
the latest tag. This allows to simplify the procedure a bit. It seems
there is no downside to this approach.
* Use official Docker in Docker images to build data partition
Instead of building our own Debian based image let's use the official
Docker in Docker image. This avoids building an image for the hassio
data partition and speeds up build as well.
This calls mount commands using sudo to mount the data partition as part
of the buildroot build now. This is not much different from before as
mount has been called as root inside the container, essentially equates
to the same "isolation" level.
* Use image digest as part of the file name
The landing page has no version information in the tag. To avoid
potentially source caching issues, use the digest as part of the file
name.
Add buildroot utils/check-package check to the pr-checks.yml workflow.
It checks for common errors/mistakes when creating own buildroot
packages. Also fixed all warnings this utility output for our existing packages.
* Enable some useful kernel configurations
* Add xe-guest-utilities for better Xen support
Add guest utilities and make sure the Xen guest daemon gets started
when running under Xen virtualization.
