Dateien hochladen nach „buildroot-external/board/amlogic/s9xx“

buildroot-external/board/amlogic/s9xx/boot-env.txt

@@ -0,0 +1,2 @@
+# Uncomment this to enable GPIO support for RPI-RF-MOD/HM-MOD-RPI-PCB
+#overlays=rpi-rf-mod

buildroot-external/board/amlogic/s9xx/cmdline.txt

@@ -0,0 +1 @@
+console=tty0 console=ttyAML0,115200n8

buildroot-external/board/amlogic/s9xx/hassos-hook.sh

@@ -0,0 +1,26 @@
+#!/bin/bash
+# shellcheck disable=SC2155
+
+function hassos_pre_image() {
+    local BOOT_DATA="$(path_boot_dir)"
+    local UBOOT_SM1="${BINARIES_DIR}/u-boot.sm1"
+    local SPL_IMG="$(path_spl_img)"
+
+    cp "${BINARIES_DIR}/boot.scr" "${BOOT_DATA}/boot.scr"
+    cp "${BINARIES_DIR}/meson-sm1-odroid-c4.dtb" "${BOOT_DATA}/meson-sm1-odroid-c4.dtb"
+
+    mkdir -p "${BOOT_DATA}/overlays"
+    cp "${BINARIES_DIR}"/*.dtbo "${BOOT_DATA}/overlays/"
+    cp "${BOARD_DIR}/boot-env.txt" "${BOOT_DATA}/haos-config.txt"
+    cp "${BOARD_DIR}/cmdline.txt" "${BOOT_DATA}/cmdline.txt"
+
+    # SPL
+    create_spl_image
+
+    dd if="${UBOOT_SM1}" of="${SPL_IMG}" conv=notrunc bs=512 seek=1
+}
+
+
+function hassos_post_image() {
+    convert_disk_image_xz
+}

buildroot-external/board/amlogic/s9xx/meta

@@ -0,0 +1,10 @@
+BOARD_ID=odroid-c4
+BOARD_NAME="Hardkernel Odroid-C4"
+CHASSIS=embedded
+BOOTLOADER=uboot
+KERNEL_FILE=Image
+BOOT_SYS=mbr
+BOOT_SPL=true
+BOOT_ENV_SIZE=0x2000
+SUPERVISOR_MACHINE=odroid-c4
+SUPERVISOR_ARCH=aarch64

buildroot-external/board/amlogic/s9xx/uboot.config

@@ -0,0 +1,4 @@
+CONFIG_DOS_PARTITION=y
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_USB_STORAGE is not set
+CONFIG_DISPLAY_BOARDINFO=y