cb58b14e06
* RaspberryPi: Update kernel 5.15.61 - 1.20220830 * Add Yellow to the Raspberry Pi kernel update script * Bump Yellow to kernel 5.15.61 - 1.20220830 Also drop the work around for the LED polarity as the new firmware has been fixed. * Explicitly select no kernel module compression Home Assistant OS uses a compressed rootfs already, no compression for kernel modules necessary. * Bump buildroot * buildroot d7e4c223e5...5468d36a26 (1): > package/rpi-firmware: bump version to 1.20220830
69 lines
2.0 KiB
Diff
69 lines
2.0 KiB
Diff
From f69ef30ade36371215d02546d603143cc13adef2 Mon Sep 17 00:00:00 2001
|
|
Message-Id: <f69ef30ade36371215d02546d603143cc13adef2.1662565903.git.stefan@agner.ch>
|
|
In-Reply-To: <b28a8f5b591841f88f19cbf9850d713a602d912e.1662565903.git.stefan@agner.ch>
|
|
References: <b28a8f5b591841f88f19cbf9850d713a602d912e.1662565903.git.stefan@agner.ch>
|
|
From: Stefan Agner <stefan@agner.ch>
|
|
Date: Sat, 30 Jul 2022 11:21:31 +0200
|
|
Subject: [PATCH] ARM: dts: bcm2711: yellow: Add LED overrides
|
|
|
|
Add device tree overrides for all three LEDs.
|
|
|
|
Signed-off-by: Stefan Agner <stefan@agner.ch>
|
|
---
|
|
arch/arm/boot/dts/bcm2711-rpi-cm4-ha-yellow.dts | 17 ++++++++++-------
|
|
1 file changed, 10 insertions(+), 7 deletions(-)
|
|
|
|
diff --git a/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-yellow.dts b/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-yellow.dts
|
|
index f354bfb69093..2d272a02128b 100644
|
|
--- a/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-yellow.dts
|
|
+++ b/arch/arm/boot/dts/bcm2711-rpi-cm4-ha-yellow.dts
|
|
@@ -621,20 +621,24 @@ audio_pins: audio_pins {
|
|
|
|
&leds {
|
|
act_led: led-act {
|
|
- label = "led0";
|
|
+ label = "act";
|
|
linux,default-trigger = "activity";
|
|
+ default-state = "off";
|
|
gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
pwr_led: led-pwr {
|
|
- label = "led1";
|
|
+ label = "pwr";
|
|
linux,default-trigger = "default-on";
|
|
+ default-state = "off";
|
|
gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
- user_led: led-user {
|
|
- label = "led2";
|
|
+ usr_led: led-usr {
|
|
+ label = "usr";
|
|
linux,default-trigger = "heartbeat";
|
|
+ default-state = "off";
|
|
+ panic-indicator;
|
|
gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
@@ -670,14 +674,13 @@ cam0_reg: &cam1_reg {
|
|
|
|
/ {
|
|
__overrides__ {
|
|
- act_led_gpio = <&act_led>,"gpios:4";
|
|
- act_led_activelow = <&act_led>,"gpios:8";
|
|
act_led_trigger = <&act_led>,"linux,default-trigger";
|
|
|
|
- pwr_led_gpio = <&pwr_led>,"gpios:4";
|
|
pwr_led_activelow = <&pwr_led>,"gpios:8";
|
|
pwr_led_trigger = <&pwr_led>,"linux,default-trigger";
|
|
|
|
+ usr_led_trigger = <&usr_led>,"linux,default-trigger";
|
|
+
|
|
eth_led0 = <&phy1>,"led-modes:0";
|
|
eth_led1 = <&phy1>,"led-modes:4";
|
|
|
|
--
|
|
2.37.3
|
|
|