* Add ODROID-M1 board support * Add Rockchip kernel config for ODROID-M1 Kernel defconfig for Rockchip is based on Armbian kernel defconfig from config/kernel/linux-rk3568-odroid-edge.config (git hash 95c829f9e664). * Add U-Boot/Kernel patches * Add Rockchip blob support Add package which provides Rockchip TPL and ATF firmware binaries. * Use latest U-Boot for ODROID-M1 * Fix Rockchip blob support * Update defconfig * Use GPT by default * Create uboot partition to support non-recovery boot * Enable eMMC boot in U-Boot SPL * Drop unnecessary mmc device selection Distro boot already activates the right mmc device. The extra selection seems to actually cause problems for eMMC boot. * Make sure driver for eMMC is built-in * Use odroid-m1 as Supervisor machine * Add ODROID-M1 to CI pipeline and issue template * Bump to Linux 6.1.16
456 lines
11 KiB
Diff
456 lines
11 KiB
Diff
From d388735d551e09b00317a509859fca51776b9826 Mon Sep 17 00:00:00 2001
|
|
Message-Id: <d388735d551e09b00317a509859fca51776b9826.1678107917.git.stefan@agner.ch>
|
|
From: Dongjin Kim <tobetter@gmail.com>
|
|
Date: Fri, 30 Sep 2022 07:12:35 +0200
|
|
Subject: [PATCH] arm64: dts: rockchip: Add Hardkernel ODROID-M1 board
|
|
|
|
This patch is to add a device tree for new board Hardkernel ODROID-M1
|
|
based on Rockchip RK3568, includes basic peripherals -
|
|
uart/eMMC/uSD/i2c and on-board ethernet.
|
|
|
|
Signed-off-by: Dongjin Kim <tobetter@gmail.com>
|
|
[aurelien@aurel32.net: addressed issues from initial review]
|
|
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Tested-by: Dan Johansen <strit@manjaro.org>
|
|
Link: https://lore.kernel.org/r/20220930051246.391614-3-aurelien@aurel32.net
|
|
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
---
|
|
arch/arm64/boot/dts/rockchip/Makefile | 1 +
|
|
.../boot/dts/rockchip/rk3568-odroid-m1.dts | 414 ++++++++++++++++++
|
|
2 files changed, 415 insertions(+)
|
|
create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
|
|
|
|
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
|
|
index 8c15593c0ca4..5dc1607b3ecf 100644
|
|
--- a/arch/arm64/boot/dts/rockchip/Makefile
|
|
+++ b/arch/arm64/boot/dts/rockchip/Makefile
|
|
@@ -71,4 +71,5 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-roc-pc.dtb
|
|
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-cm4.dtb
|
|
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
|
|
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
|
|
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-odroid-m1.dtb
|
|
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
|
|
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
|
|
new file mode 100644
|
|
index 000000000000..b3016437640b
|
|
--- /dev/null
|
|
+++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
|
|
@@ -0,0 +1,414 @@
|
|
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
+/*
|
|
+ * Copyright (c) 2022 Hardkernel Co., Ltd.
|
|
+ *
|
|
+ */
|
|
+
|
|
+/dts-v1/;
|
|
+#include <dt-bindings/gpio/gpio.h>
|
|
+#include <dt-bindings/leds/common.h>
|
|
+#include <dt-bindings/pinctrl/rockchip.h>
|
|
+#include "rk3568.dtsi"
|
|
+
|
|
+/ {
|
|
+ model = "Hardkernel ODROID-M1";
|
|
+ compatible = "rockchip,rk3568-odroid-m1", "rockchip,rk3568";
|
|
+
|
|
+ aliases {
|
|
+ ethernet0 = &gmac0;
|
|
+ i2c0 = &i2c3;
|
|
+ i2c3 = &i2c0;
|
|
+ mmc0 = &sdhci;
|
|
+ mmc1 = &sdmmc0;
|
|
+ serial0 = &uart1;
|
|
+ serial1 = &uart0;
|
|
+ };
|
|
+
|
|
+ chosen {
|
|
+ stdout-path = "serial2:1500000n8";
|
|
+ };
|
|
+
|
|
+ dc_12v: dc-12v-regulator {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "dc_12v";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <12000000>;
|
|
+ regulator-max-microvolt = <12000000>;
|
|
+ };
|
|
+
|
|
+ leds {
|
|
+ compatible = "gpio-leds";
|
|
+
|
|
+ led_power: led-0 {
|
|
+ gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
|
|
+ function = LED_FUNCTION_POWER;
|
|
+ color = <LED_COLOR_ID_RED>;
|
|
+ default-state = "keep";
|
|
+ linux,default-trigger = "default-on";
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&led_power_pin>;
|
|
+ };
|
|
+ led_work: led-1 {
|
|
+ gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
|
|
+ function = LED_FUNCTION_HEARTBEAT;
|
|
+ color = <LED_COLOR_ID_BLUE>;
|
|
+ linux,default-trigger = "heartbeat";
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&led_work_pin>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vcc3v3_sys: vcc3v3-sys-regulator {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "vcc3v3_sys";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <3300000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+ vin-supply = <&dc_12v>;
|
|
+ };
|
|
+};
|
|
+
|
|
+&cpu0 {
|
|
+ cpu-supply = <&vdd_cpu>;
|
|
+};
|
|
+
|
|
+&cpu1 {
|
|
+ cpu-supply = <&vdd_cpu>;
|
|
+};
|
|
+
|
|
+&cpu2 {
|
|
+ cpu-supply = <&vdd_cpu>;
|
|
+};
|
|
+
|
|
+&cpu3 {
|
|
+ cpu-supply = <&vdd_cpu>;
|
|
+};
|
|
+
|
|
+&gmac0 {
|
|
+ assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
|
|
+ assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>;
|
|
+ assigned-clock-rates = <0>, <125000000>;
|
|
+ clock_in_out = "output";
|
|
+ phy-handle = <&rgmii_phy0>;
|
|
+ phy-mode = "rgmii";
|
|
+ phy-supply = <&vcc3v3_sys>;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&gmac0_miim
|
|
+ &gmac0_tx_bus2
|
|
+ &gmac0_rx_bus2
|
|
+ &gmac0_rgmii_clk
|
|
+ &gmac0_rgmii_bus>;
|
|
+ status = "okay";
|
|
+
|
|
+ tx_delay = <0x4f>;
|
|
+ rx_delay = <0x2d>;
|
|
+};
|
|
+
|
|
+&i2c0 {
|
|
+ status = "okay";
|
|
+
|
|
+ vdd_cpu: regulator@1c {
|
|
+ compatible = "tcs,tcs4525";
|
|
+ reg = <0x1c>;
|
|
+ fcs,suspend-voltage-selector = <1>;
|
|
+ regulator-name = "vdd_cpu";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <800000>;
|
|
+ regulator-max-microvolt = <1150000>;
|
|
+ regulator-ramp-delay = <2300>;
|
|
+ vin-supply = <&vcc3v3_sys>;
|
|
+
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ rk809: pmic@20 {
|
|
+ compatible = "rockchip,rk809";
|
|
+ reg = <0x20>;
|
|
+ interrupt-parent = <&gpio0>;
|
|
+ interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
|
|
+ #clock-cells = <1>;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&pmic_int_l>;
|
|
+ rockchip,system-power-controller;
|
|
+ vcc1-supply = <&vcc3v3_sys>;
|
|
+ vcc2-supply = <&vcc3v3_sys>;
|
|
+ vcc3-supply = <&vcc3v3_sys>;
|
|
+ vcc4-supply = <&vcc3v3_sys>;
|
|
+ vcc5-supply = <&vcc3v3_sys>;
|
|
+ vcc6-supply = <&vcc3v3_sys>;
|
|
+ vcc7-supply = <&vcc3v3_sys>;
|
|
+ vcc8-supply = <&vcc3v3_sys>;
|
|
+ vcc9-supply = <&vcc3v3_sys>;
|
|
+ wakeup-source;
|
|
+
|
|
+ regulators {
|
|
+ vdd_logic: DCDC_REG1 {
|
|
+ regulator-name = "vdd_logic";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-init-microvolt = <900000>;
|
|
+ regulator-initial-mode = <0x2>;
|
|
+ regulator-min-microvolt = <500000>;
|
|
+ regulator-max-microvolt = <1350000>;
|
|
+ regulator-ramp-delay = <6001>;
|
|
+
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vdd_gpu: DCDC_REG2 {
|
|
+ regulator-name = "vdd_gpu";
|
|
+ regulator-always-on;
|
|
+ regulator-init-microvolt = <900000>;
|
|
+ regulator-initial-mode = <0x2>;
|
|
+ regulator-min-microvolt = <500000>;
|
|
+ regulator-max-microvolt = <1350000>;
|
|
+ regulator-ramp-delay = <6001>;
|
|
+
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vcc_ddr: DCDC_REG3 {
|
|
+ regulator-name = "vcc_ddr";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-initial-mode = <0x2>;
|
|
+
|
|
+ regulator-state-mem {
|
|
+ regulator-on-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vdd_npu: DCDC_REG4 {
|
|
+ regulator-name = "vdd_npu";
|
|
+ regulator-init-microvolt = <900000>;
|
|
+ regulator-initial-mode = <0x2>;
|
|
+ regulator-min-microvolt = <500000>;
|
|
+ regulator-max-microvolt = <1350000>;
|
|
+ regulator-ramp-delay = <6001>;
|
|
+
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vcc_1v8: DCDC_REG5 {
|
|
+ regulator-name = "vcc_1v8";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <1800000>;
|
|
+
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vdda0v9_image: LDO_REG1 {
|
|
+ regulator-name = "vdda0v9_image";
|
|
+ regulator-always-on;
|
|
+ regulator-min-microvolt = <900000>;
|
|
+ regulator-max-microvolt = <900000>;
|
|
+
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vdda_0v9: LDO_REG2 {
|
|
+ regulator-name = "vdda_0v9";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <900000>;
|
|
+ regulator-max-microvolt = <900000>;
|
|
+
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vdda0v9_pmu: LDO_REG3 {
|
|
+ regulator-name = "vdda0v9_pmu";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <900000>;
|
|
+ regulator-max-microvolt = <900000>;
|
|
+
|
|
+ regulator-state-mem {
|
|
+ regulator-on-in-suspend;
|
|
+ regulator-suspend-microvolt = <900000>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vccio_acodec: LDO_REG4 {
|
|
+ regulator-name = "vccio_acodec";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <3300000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vccio_sd: LDO_REG5 {
|
|
+ regulator-name = "vccio_sd";
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vcc3v3_pmu: LDO_REG6 {
|
|
+ regulator-name = "vcc3v3_pmu";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <3300000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+
|
|
+ regulator-state-mem {
|
|
+ regulator-on-in-suspend;
|
|
+ regulator-suspend-microvolt = <3300000>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vcca_1v8: LDO_REG7 {
|
|
+ regulator-name = "vcca_1v8";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <1800000>;
|
|
+
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vcca1v8_pmu: LDO_REG8 {
|
|
+ regulator-name = "vcca1v8_pmu";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <1800000>;
|
|
+
|
|
+ regulator-state-mem {
|
|
+ regulator-on-in-suspend;
|
|
+ regulator-suspend-microvolt = <1800000>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vcca1v8_image: LDO_REG9 {
|
|
+ regulator-name = "vcca1v8_image";
|
|
+ regulator-always-on;
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <1800000>;
|
|
+
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vcc_3v3: SWITCH_REG1 {
|
|
+ regulator-name = "vcc_3v3";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vcc3v3_sd: SWITCH_REG2 {
|
|
+ regulator-name = "vcc3v3_sd";
|
|
+
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+};
|
|
+
|
|
+&mdio0 {
|
|
+ rgmii_phy0: ethernet-phy@0 {
|
|
+ compatible = "ethernet-phy-ieee802.3-c22";
|
|
+ reg = <0x0>;
|
|
+ reset-assert-us = <20000>;
|
|
+ reset-deassert-us = <100000>;
|
|
+ reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
|
|
+ };
|
|
+};
|
|
+
|
|
+&pinctrl {
|
|
+ leds {
|
|
+ led_power_pin: led-power-pin {
|
|
+ rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
+ };
|
|
+ led_work_pin: led-work-pin {
|
|
+ rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ pmic {
|
|
+ pmic_int_l: pmic-int-l {
|
|
+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
+ };
|
|
+ };
|
|
+};
|
|
+
|
|
+&pmu_io_domains {
|
|
+ pmuio1-supply = <&vcc3v3_pmu>;
|
|
+ pmuio2-supply = <&vcc3v3_pmu>;
|
|
+ vccio1-supply = <&vccio_acodec>;
|
|
+ vccio2-supply = <&vcc_1v8>;
|
|
+ vccio3-supply = <&vccio_sd>;
|
|
+ vccio4-supply = <&vcc_1v8>;
|
|
+ vccio5-supply = <&vcc_3v3>;
|
|
+ vccio6-supply = <&vcc_3v3>;
|
|
+ vccio7-supply = <&vcc_3v3>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&saradc {
|
|
+ vref-supply = <&vcca_1v8>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&sdhci {
|
|
+ bus-width = <8>;
|
|
+ max-frequency = <200000000>;
|
|
+ non-removable;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe &emmc_rstnout>;
|
|
+ vmmc-supply = <&vcc_3v3>;
|
|
+ vqmmc-supply = <&vcc_1v8>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&sdmmc0 {
|
|
+ bus-width = <4>;
|
|
+ cap-sd-highspeed;
|
|
+ cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
|
|
+ disable-wp;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
|
|
+ sd-uhs-sdr50;
|
|
+ vmmc-supply = <&vcc3v3_sd>;
|
|
+ vqmmc-supply = <&vccio_sd>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&uart2 {
|
|
+ status = "okay";
|
|
+};
|
|
--
|
|
2.39.2
|
|
|