a0871be6c0
* Update buildroot-patches for 2020.11-rc1 buildroot * Update buildroot to 2020.11-rc1 Signed-off-by: Stefan Agner <stefan@agner.ch> * Don't rely on sfdisk --list-free output The --list-free (-F) argument does not allow machine readable mode. And it seems that the output format changes over time (different spacing, using size postfixes instead of raw blocks). Use sfdisk json output and calculate free partition space ourselfs. This works for 2.35 and 2.36 and is more robust since we rely on output which is meant for scripts to parse. * Migrate defconfigs for Buildroot 2020.11-rc1 In particular, rename BR2_TARGET_UBOOT_BOOT_SCRIPT(_SOURCE) to BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT(_SOURCE). * Rebase/remove systemd patches for systemd 246 * Drop apparmor/libapparmor from buildroot-external * hassos-persists: use /run as directory for lockfiles The U-Boot tools use /var/lock by default which is not created any more by systemd by default (it is under tmpfiles legacy.conf, which we no longer install). * Disable systemd-update-done.service The service is not suited for pure read-only systems. In particular the service needs to be able to write a file in /etc and /var. Remove the service. Note: This is a static service and cannot be removed using systemd-preset. * Disable apparmor.service for now The service loads all default profiles. Some might actually cause problems. E.g. the profile for ping seems not to match our setup for /etc/resolv.conf: [85503.634653] audit: type=1400 audit(1605286002.684:236): apparmor="DENIED" operation="open" profile="ping" name="/run/resolv.conf" pid=27585 comm="ping" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
2595 lines
78 KiB
Python
2595 lines
78 KiB
Python
# This file was auto-generated by support/scripts/gen-bootlin-toolchains
|
|
# Do not edit
|
|
from tests.toolchain.test_external import TestExternalToolchain
|
|
|
|
|
|
class TestExternalToolchainBootlinAarch64GlibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_aarch64=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_AARCH64_GLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "aarch64-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinAarch64GlibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_aarch64=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_AARCH64_GLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "aarch64-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinAarch64MuslBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_aarch64=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_AARCH64_MUSL_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "aarch64-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinAarch64MuslStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_aarch64=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_AARCH64_MUSL_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "aarch64-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinAarch64UclibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_aarch64=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_AARCH64_UCLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "aarch64-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinAarch64UclibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_aarch64=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_AARCH64_UCLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "aarch64-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinAarch64beGlibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_aarch64_be=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_AARCH64BE_GLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "aarch64_be-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinAarch64beGlibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_aarch64_be=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_AARCH64BE_GLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "aarch64_be-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinAarch64beUclibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_aarch64_be=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_AARCH64BE_UCLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "aarch64_be-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinAarch64beUclibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_aarch64_be=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_AARCH64BE_UCLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "aarch64_be-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinArcle750dUclibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_arcle=y
|
|
BR2_arc750d=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARCLE_750D_UCLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "arc-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinArcle750dUclibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_arcle=y
|
|
BR2_arc750d=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARCLE_750D_UCLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "arc-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinArclehs38GlibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_arcle=y
|
|
BR2_archs38=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARCLE_HS38_GLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "arc-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinArclehs38GlibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_arcle=y
|
|
BR2_archs38=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARCLE_HS38_GLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "arc-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinArclehs38UclibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_arcle=y
|
|
BR2_archs38=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARCLE_HS38_UCLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "arc-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinArclehs38UclibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_arcle=y
|
|
BR2_archs38=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARCLE_HS38_UCLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "arc-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinArmv5eabiGlibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_arm=y
|
|
BR2_arm926t=y
|
|
BR2_ARM_EABI=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARMV5_EABI_GLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "arm-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinArmv5eabiGlibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_arm=y
|
|
BR2_arm926t=y
|
|
BR2_ARM_EABI=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARMV5_EABI_GLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "arm-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinArmv5eabiMuslBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_arm=y
|
|
BR2_arm926t=y
|
|
BR2_ARM_EABI=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARMV5_EABI_MUSL_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "arm-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinArmv5eabiMuslStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_arm=y
|
|
BR2_arm926t=y
|
|
BR2_ARM_EABI=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARMV5_EABI_MUSL_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "arm-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinArmv5eabiUclibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_arm=y
|
|
BR2_arm926t=y
|
|
BR2_ARM_EABI=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARMV5_EABI_UCLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "arm-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinArmv5eabiUclibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_arm=y
|
|
BR2_arm926t=y
|
|
BR2_ARM_EABI=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARMV5_EABI_UCLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "arm-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinArmv6eabihfGlibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_arm=y
|
|
BR2_arm1176jzf_s=y
|
|
BR2_ARM_EABIHF=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARMV6_EABIHF_GLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "arm-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinArmv6eabihfGlibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_arm=y
|
|
BR2_arm1176jzf_s=y
|
|
BR2_ARM_EABIHF=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARMV6_EABIHF_GLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "arm-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinArmv6eabihfMuslBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_arm=y
|
|
BR2_arm1176jzf_s=y
|
|
BR2_ARM_EABIHF=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARMV6_EABIHF_MUSL_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "arm-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinArmv6eabihfMuslStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_arm=y
|
|
BR2_arm1176jzf_s=y
|
|
BR2_ARM_EABIHF=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARMV6_EABIHF_MUSL_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "arm-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinArmv6eabihfUclibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_arm=y
|
|
BR2_arm1176jzf_s=y
|
|
BR2_ARM_EABIHF=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARMV6_EABIHF_UCLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "arm-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinArmv6eabihfUclibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_arm=y
|
|
BR2_arm1176jzf_s=y
|
|
BR2_ARM_EABIHF=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARMV6_EABIHF_UCLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "arm-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinArmv7eabihfGlibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_arm=y
|
|
BR2_cortex_a8=y
|
|
BR2_ARM_EABIHF=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARMV7_EABIHF_GLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "arm-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinArmv7eabihfGlibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_arm=y
|
|
BR2_cortex_a8=y
|
|
BR2_ARM_EABIHF=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARMV7_EABIHF_GLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "arm-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinArmv7eabihfMuslBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_arm=y
|
|
BR2_cortex_a8=y
|
|
BR2_ARM_EABIHF=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARMV7_EABIHF_MUSL_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "arm-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinArmv7eabihfMuslStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_arm=y
|
|
BR2_cortex_a8=y
|
|
BR2_ARM_EABIHF=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARMV7_EABIHF_MUSL_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "arm-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinArmv7eabihfUclibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_arm=y
|
|
BR2_cortex_a8=y
|
|
BR2_ARM_EABIHF=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARMV7_EABIHF_UCLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "arm-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinArmv7eabihfUclibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_arm=y
|
|
BR2_cortex_a8=y
|
|
BR2_ARM_EABIHF=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARMV7_EABIHF_UCLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "arm-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinArmv7mUclibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_arm=y
|
|
BR2_cortex_m4=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARMV7M_UCLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "arm-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinArmv7mUclibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_arm=y
|
|
BR2_cortex_m4=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARMV7M_UCLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "arm-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinM68k68xxxUclibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_m68k=y
|
|
BR2_m68k_68040=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_M68K_68XXX_UCLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "m68k-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinM68k68xxxUclibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_m68k=y
|
|
BR2_m68k_68040=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_M68K_68XXX_UCLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "m68k-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinM68kcoldfireUclibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_m68k=y
|
|
BR2_m68k_cf5208=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_M68K_COLDFIRE_UCLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "m68k-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinM68kcoldfireUclibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_m68k=y
|
|
BR2_m68k_cf5208=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_M68K_COLDFIRE_UCLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "m68k-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinMicroblazebeGlibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_microblazebe=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MICROBLAZEBE_GLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "microblaze-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinMicroblazebeGlibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_microblazebe=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MICROBLAZEBE_GLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "microblaze-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinMicroblazebeMuslBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_microblazebe=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MICROBLAZEBE_MUSL_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "microblaze-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinMicroblazebeMuslStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_microblazebe=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MICROBLAZEBE_MUSL_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "microblaze-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinMicroblazebeUclibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_microblazebe=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MICROBLAZEBE_UCLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "microblaze-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinMicroblazebeUclibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_microblazebe=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MICROBLAZEBE_UCLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "microblaze-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinMicroblazeelGlibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_microblazeel=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MICROBLAZEEL_GLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "microblazeel-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinMicroblazeelGlibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_microblazeel=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MICROBLAZEEL_GLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "microblazeel-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinMicroblazeelMuslBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_microblazeel=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MICROBLAZEEL_MUSL_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "microblazeel-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinMicroblazeelMuslStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_microblazeel=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MICROBLAZEEL_MUSL_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "microblazeel-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinMicroblazeelUclibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_microblazeel=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MICROBLAZEEL_UCLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "microblazeel-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinMicroblazeelUclibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_microblazeel=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MICROBLAZEEL_UCLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "microblazeel-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinMips32GlibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_mips=y
|
|
BR2_mips_32=y
|
|
# BR2_MIPS_SOFT_FLOAT is not set
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MIPS32_GLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "mips-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinMips32GlibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_mips=y
|
|
BR2_mips_32=y
|
|
# BR2_MIPS_SOFT_FLOAT is not set
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MIPS32_GLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "mips-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinMips32MuslBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_mips=y
|
|
BR2_mips_32=y
|
|
# BR2_MIPS_SOFT_FLOAT is not set
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MIPS32_MUSL_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "mips-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinMips32MuslStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_mips=y
|
|
BR2_mips_32=y
|
|
# BR2_MIPS_SOFT_FLOAT is not set
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MIPS32_MUSL_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "mips-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinMips32UclibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_mips=y
|
|
BR2_mips_32=y
|
|
# BR2_MIPS_SOFT_FLOAT is not set
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MIPS32_UCLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "mips-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinMips32UclibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_mips=y
|
|
BR2_mips_32=y
|
|
# BR2_MIPS_SOFT_FLOAT is not set
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MIPS32_UCLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "mips-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinMips32elGlibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_mipsel=y
|
|
BR2_mips_32=y
|
|
# BR2_MIPS_SOFT_FLOAT is not set
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MIPS32EL_GLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "mipsel-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinMips32elGlibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_mipsel=y
|
|
BR2_mips_32=y
|
|
# BR2_MIPS_SOFT_FLOAT is not set
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MIPS32EL_GLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "mipsel-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinMips32elMuslBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_mipsel=y
|
|
BR2_mips_32=y
|
|
# BR2_MIPS_SOFT_FLOAT is not set
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MIPS32EL_MUSL_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "mipsel-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinMips32elMuslStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_mipsel=y
|
|
BR2_mips_32=y
|
|
# BR2_MIPS_SOFT_FLOAT is not set
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MIPS32EL_MUSL_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "mipsel-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinMips32elUclibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_mipsel=y
|
|
BR2_mips_32=y
|
|
# BR2_MIPS_SOFT_FLOAT is not set
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MIPS32EL_UCLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "mipsel-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinMips32elUclibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_mipsel=y
|
|
BR2_mips_32=y
|
|
# BR2_MIPS_SOFT_FLOAT is not set
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MIPS32EL_UCLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "mipsel-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinMips32r5elGlibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_mipsel=y
|
|
BR2_mips_32r5=y
|
|
# BR2_MIPS_SOFT_FLOAT is not set
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MIPS32R5EL_GLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "mipsel-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinMips32r5elGlibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_mipsel=y
|
|
BR2_mips_32r5=y
|
|
# BR2_MIPS_SOFT_FLOAT is not set
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MIPS32R5EL_GLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "mipsel-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinMips32r5elMuslBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_mipsel=y
|
|
BR2_mips_32r5=y
|
|
# BR2_MIPS_SOFT_FLOAT is not set
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MIPS32R5EL_MUSL_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "mipsel-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinMips32r5elMuslStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_mipsel=y
|
|
BR2_mips_32r5=y
|
|
# BR2_MIPS_SOFT_FLOAT is not set
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MIPS32R5EL_MUSL_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "mipsel-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinMips32r5elUclibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_mipsel=y
|
|
BR2_mips_32r5=y
|
|
# BR2_MIPS_SOFT_FLOAT is not set
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MIPS32R5EL_UCLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "mipsel-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinMips32r5elUclibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_mipsel=y
|
|
BR2_mips_32r5=y
|
|
# BR2_MIPS_SOFT_FLOAT is not set
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MIPS32R5EL_UCLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "mipsel-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinMips32r6elGlibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_mipsel=y
|
|
BR2_mips_32r6=y
|
|
# BR2_MIPS_SOFT_FLOAT is not set
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MIPS32R6EL_GLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "mipsel-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinMips32r6elGlibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_mipsel=y
|
|
BR2_mips_32r6=y
|
|
# BR2_MIPS_SOFT_FLOAT is not set
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MIPS32R6EL_GLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "mipsel-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinMips32r6elMuslBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_mipsel=y
|
|
BR2_mips_32r6=y
|
|
# BR2_MIPS_SOFT_FLOAT is not set
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MIPS32R6EL_MUSL_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "mipsel-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinMips32r6elMuslStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_mipsel=y
|
|
BR2_mips_32r6=y
|
|
# BR2_MIPS_SOFT_FLOAT is not set
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MIPS32R6EL_MUSL_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "mipsel-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinMips32r6elUclibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_mipsel=y
|
|
BR2_mips_32r6=y
|
|
# BR2_MIPS_SOFT_FLOAT is not set
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MIPS32R6EL_UCLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "mipsel-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinMips32r6elUclibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_mipsel=y
|
|
BR2_mips_32r6=y
|
|
# BR2_MIPS_SOFT_FLOAT is not set
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MIPS32R6EL_UCLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "mipsel-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinMips64n32GlibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_mips64=y
|
|
BR2_mips_64=y
|
|
BR2_MIPS_NABI32=y
|
|
# BR2_MIPS_SOFT_FLOAT is not set
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MIPS64_N32_GLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "mips64-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinMips64n32GlibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_mips64=y
|
|
BR2_mips_64=y
|
|
BR2_MIPS_NABI32=y
|
|
# BR2_MIPS_SOFT_FLOAT is not set
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MIPS64_N32_GLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "mips64-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinMips64n32MuslBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_mips64=y
|
|
BR2_mips_64=y
|
|
BR2_MIPS_NABI32=y
|
|
# BR2_MIPS_SOFT_FLOAT is not set
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MIPS64_N32_MUSL_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "mips64-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinMips64n32MuslStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_mips64=y
|
|
BR2_mips_64=y
|
|
BR2_MIPS_NABI32=y
|
|
# BR2_MIPS_SOFT_FLOAT is not set
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MIPS64_N32_MUSL_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "mips64-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinMips64n32UclibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_mips64=y
|
|
BR2_mips_64=y
|
|
BR2_MIPS_NABI32=y
|
|
# BR2_MIPS_SOFT_FLOAT is not set
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MIPS64_N32_UCLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "mips64-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinMips64n32UclibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_mips64=y
|
|
BR2_mips_64=y
|
|
BR2_MIPS_NABI32=y
|
|
# BR2_MIPS_SOFT_FLOAT is not set
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MIPS64_N32_UCLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "mips64-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinMips64eln32GlibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_mips64el=y
|
|
BR2_mips_64=y
|
|
BR2_MIPS_NABI32=y
|
|
# BR2_MIPS_SOFT_FLOAT is not set
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MIPS64EL_N32_GLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "mips64el-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinMips64eln32GlibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_mips64el=y
|
|
BR2_mips_64=y
|
|
BR2_MIPS_NABI32=y
|
|
# BR2_MIPS_SOFT_FLOAT is not set
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MIPS64EL_N32_GLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "mips64el-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinMips64eln32MuslBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_mips64el=y
|
|
BR2_mips_64=y
|
|
BR2_MIPS_NABI32=y
|
|
# BR2_MIPS_SOFT_FLOAT is not set
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MIPS64EL_N32_MUSL_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "mips64el-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinMips64eln32MuslStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_mips64el=y
|
|
BR2_mips_64=y
|
|
BR2_MIPS_NABI32=y
|
|
# BR2_MIPS_SOFT_FLOAT is not set
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MIPS64EL_N32_MUSL_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "mips64el-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinMips64eln32UclibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_mips64el=y
|
|
BR2_mips_64=y
|
|
BR2_MIPS_NABI32=y
|
|
# BR2_MIPS_SOFT_FLOAT is not set
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MIPS64EL_N32_UCLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "mips64el-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinMips64eln32UclibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_mips64el=y
|
|
BR2_mips_64=y
|
|
BR2_MIPS_NABI32=y
|
|
# BR2_MIPS_SOFT_FLOAT is not set
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MIPS64EL_N32_UCLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "mips64el-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinMips64r6eln32GlibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_mips64el=y
|
|
BR2_mips_64r6=y
|
|
BR2_MIPS_NABI32=y
|
|
# BR2_MIPS_SOFT_FLOAT is not set
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MIPS64R6EL_N32_GLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "mips64el-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinMips64r6eln32GlibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_mips64el=y
|
|
BR2_mips_64r6=y
|
|
BR2_MIPS_NABI32=y
|
|
# BR2_MIPS_SOFT_FLOAT is not set
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MIPS64R6EL_N32_GLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "mips64el-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinMips64r6eln32MuslBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_mips64el=y
|
|
BR2_mips_64r6=y
|
|
BR2_MIPS_NABI32=y
|
|
# BR2_MIPS_SOFT_FLOAT is not set
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MIPS64R6EL_N32_MUSL_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "mips64el-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinMips64r6eln32MuslStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_mips64el=y
|
|
BR2_mips_64r6=y
|
|
BR2_MIPS_NABI32=y
|
|
# BR2_MIPS_SOFT_FLOAT is not set
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MIPS64R6EL_N32_MUSL_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "mips64el-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinMips64r6eln32UclibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_mips64el=y
|
|
BR2_mips_64r6=y
|
|
BR2_MIPS_NABI32=y
|
|
# BR2_MIPS_SOFT_FLOAT is not set
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MIPS64R6EL_N32_UCLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "mips64el-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinMips64r6eln32UclibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_mips64el=y
|
|
BR2_mips_64r6=y
|
|
BR2_MIPS_NABI32=y
|
|
# BR2_MIPS_SOFT_FLOAT is not set
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MIPS64R6EL_N32_UCLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "mips64el-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinNios2GlibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_nios2=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_NIOS2_GLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "nios2-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinNios2GlibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_nios2=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_NIOS2_GLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "nios2-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinOpenriscMuslBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_or1k=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_OPENRISC_MUSL_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "or1k-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinOpenriscMuslStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_or1k=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_OPENRISC_MUSL_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "or1k-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinOpenriscUclibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_or1k=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_OPENRISC_UCLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "or1k-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinOpenriscUclibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_or1k=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_OPENRISC_UCLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "or1k-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinPowerpc440fpGlibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_powerpc=y
|
|
BR2_powerpc_440fp=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_POWERPC_440FP_GLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "powerpc-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinPowerpc440fpGlibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_powerpc=y
|
|
BR2_powerpc_440fp=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_POWERPC_440FP_GLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "powerpc-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinPowerpc440fpMuslBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_powerpc=y
|
|
BR2_powerpc_440fp=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_POWERPC_440FP_MUSL_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "powerpc-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinPowerpc440fpMuslStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_powerpc=y
|
|
BR2_powerpc_440fp=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_POWERPC_440FP_MUSL_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "powerpc-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinPowerpc440fpUclibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_powerpc=y
|
|
BR2_powerpc_440fp=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_POWERPC_440FP_UCLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "powerpc-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinPowerpc440fpUclibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_powerpc=y
|
|
BR2_powerpc_440fp=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_POWERPC_440FP_UCLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "powerpc-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinPowerpce300c3GlibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_powerpc=y
|
|
BR2_powerpc_e300c3=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_POWERPC_E300C3_GLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "powerpc-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinPowerpce300c3GlibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_powerpc=y
|
|
BR2_powerpc_e300c3=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_POWERPC_E300C3_GLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "powerpc-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinPowerpce300c3MuslBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_powerpc=y
|
|
BR2_powerpc_e300c3=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_POWERPC_E300C3_MUSL_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "powerpc-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinPowerpce300c3MuslStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_powerpc=y
|
|
BR2_powerpc_e300c3=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_POWERPC_E300C3_MUSL_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "powerpc-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinPowerpce300c3UclibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_powerpc=y
|
|
BR2_powerpc_e300c3=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_POWERPC_E300C3_UCLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "powerpc-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinPowerpce300c3UclibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_powerpc=y
|
|
BR2_powerpc_e300c3=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_POWERPC_E300C3_UCLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "powerpc-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinPowerpce500mcGlibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_powerpc=y
|
|
BR2_powerpc_e500mc=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_POWERPC_E500MC_GLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "powerpc-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinPowerpce500mcGlibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_powerpc=y
|
|
BR2_powerpc_e500mc=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_POWERPC_E500MC_GLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "powerpc-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinPowerpce500mcMuslBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_powerpc=y
|
|
BR2_powerpc_e500mc=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_POWERPC_E500MC_MUSL_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "powerpc-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinPowerpce500mcMuslStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_powerpc=y
|
|
BR2_powerpc_e500mc=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_POWERPC_E500MC_MUSL_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "powerpc-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinPowerpce500mcUclibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_powerpc=y
|
|
BR2_powerpc_e500mc=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_POWERPC_E500MC_UCLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "powerpc-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinPowerpce500mcUclibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_powerpc=y
|
|
BR2_powerpc_e500mc=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_POWERPC_E500MC_UCLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "powerpc-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinPowerpc64e5500GlibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_powerpc64=y
|
|
BR2_powerpc_e5500=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_POWERPC64_E5500_GLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "powerpc64-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinPowerpc64e5500GlibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_powerpc64=y
|
|
BR2_powerpc_e5500=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_POWERPC64_E5500_GLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "powerpc64-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinPowerpc64e6500GlibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_powerpc64=y
|
|
BR2_powerpc_e6500=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_POWERPC64_E6500_GLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "powerpc64-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinPowerpc64e6500GlibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_powerpc64=y
|
|
BR2_powerpc_e6500=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_POWERPC64_E6500_GLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "powerpc64-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinPowerpc64e6500MuslBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_powerpc64=y
|
|
BR2_powerpc_e6500=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_POWERPC64_E6500_MUSL_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "powerpc64-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinPowerpc64e6500MuslStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_powerpc64=y
|
|
BR2_powerpc_e6500=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_POWERPC64_E6500_MUSL_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "powerpc64-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinPowerpc64power8GlibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_powerpc64=y
|
|
BR2_powerpc_power8=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_POWERPC64_POWER8_GLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "powerpc64-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinPowerpc64power8GlibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_powerpc64=y
|
|
BR2_powerpc_power8=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_POWERPC64_POWER8_GLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "powerpc64-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinPowerpc64power8MuslBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_powerpc64=y
|
|
BR2_powerpc_power8=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_POWERPC64_POWER8_MUSL_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "powerpc64-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinPowerpc64power8MuslStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_powerpc64=y
|
|
BR2_powerpc_power8=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_POWERPC64_POWER8_MUSL_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "powerpc64-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinPowerpc64lepower8GlibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_powerpc64le=y
|
|
BR2_powerpc_power8=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_POWERPC64LE_POWER8_GLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "powerpc64le-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinPowerpc64lepower8GlibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_powerpc64le=y
|
|
BR2_powerpc_power8=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_POWERPC64LE_POWER8_GLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "powerpc64le-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinPowerpc64lepower8MuslBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_powerpc64le=y
|
|
BR2_powerpc_power8=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_POWERPC64LE_POWER8_MUSL_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "powerpc64le-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinPowerpc64lepower8MuslStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_powerpc64le=y
|
|
BR2_powerpc_power8=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_POWERPC64LE_POWER8_MUSL_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "powerpc64le-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinRiscv32ilp32dGlibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_riscv=y
|
|
BR2_riscv_g=y
|
|
BR2_RISCV_32=y
|
|
BR2_RISCV_ABI_ILP32D=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_RISCV32_ILP32D_GLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "riscv32-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinRiscv64GlibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_riscv=y
|
|
BR2_riscv_g=y
|
|
BR2_RISCV_64=y
|
|
BR2_RISCV_ABI_LP64=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_RISCV64_GLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "riscv64-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinRiscv64MuslBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_riscv=y
|
|
BR2_riscv_g=y
|
|
BR2_RISCV_64=y
|
|
BR2_RISCV_ABI_LP64=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_RISCV64_MUSL_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "riscv64-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinShsh4GlibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_sh=y
|
|
BR2_sh4=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_SH_SH4_GLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "sh4-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinShsh4GlibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_sh=y
|
|
BR2_sh4=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_SH_SH4_GLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "sh4-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinShsh4MuslBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_sh=y
|
|
BR2_sh4=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_SH_SH4_MUSL_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "sh4-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinShsh4MuslStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_sh=y
|
|
BR2_sh4=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_SH_SH4_MUSL_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "sh4-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinShsh4UclibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_sh=y
|
|
BR2_sh4=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_SH_SH4_UCLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "sh4-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinShsh4UclibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_sh=y
|
|
BR2_sh4=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_SH_SH4_UCLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "sh4-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinShsh4aebGlibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_sh=y
|
|
BR2_sh4aeb=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_SH_SH4AEB_GLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "sh4aeb-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinShsh4aebGlibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_sh=y
|
|
BR2_sh4aeb=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_SH_SH4AEB_GLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "sh4aeb-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinShsh4aebMuslBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_sh=y
|
|
BR2_sh4aeb=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_SH_SH4AEB_MUSL_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "sh4aeb-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinShsh4aebMuslStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_sh=y
|
|
BR2_sh4aeb=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_SH_SH4AEB_MUSL_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "sh4aeb-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinSparc64GlibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_sparc64=y
|
|
BR2_sparc_v9=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_SPARC64_GLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "sparc64-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinSparc64GlibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_sparc64=y
|
|
BR2_sparc_v9=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_SPARC64_GLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "sparc64-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinSparcv8UclibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_sparc=y
|
|
BR2_sparc_v8=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_SPARCV8_UCLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "sparc-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinSparcv8UclibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_sparc=y
|
|
BR2_sparc_v8=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_SPARCV8_UCLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "sparc-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinX8664corei7GlibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_x86_64=y
|
|
BR2_x86_corei7=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_X86_64_CORE_I7_GLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "x86_64-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinX8664corei7GlibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_x86_64=y
|
|
BR2_x86_corei7=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_X86_64_CORE_I7_GLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "x86_64-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinX8664corei7MuslBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_x86_64=y
|
|
BR2_x86_corei7=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_X86_64_CORE_I7_MUSL_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "x86_64-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinX8664corei7MuslStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_x86_64=y
|
|
BR2_x86_corei7=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_X86_64_CORE_I7_MUSL_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "x86_64-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinX8664corei7UclibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_x86_64=y
|
|
BR2_x86_corei7=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_X86_64_CORE_I7_UCLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "x86_64-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinX8664corei7UclibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_x86_64=y
|
|
BR2_x86_corei7=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_X86_64_CORE_I7_UCLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "x86_64-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinX86core2GlibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_i386=y
|
|
BR2_x86_core2=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_X86_CORE2_GLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "i686-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinX86core2GlibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_i386=y
|
|
BR2_x86_core2=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_X86_CORE2_GLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "i686-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinX86core2MuslBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_i386=y
|
|
BR2_x86_core2=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_X86_CORE2_MUSL_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "i686-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinX86core2MuslStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_i386=y
|
|
BR2_x86_core2=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_X86_CORE2_MUSL_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "i686-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinX86core2UclibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_i386=y
|
|
BR2_x86_core2=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_X86_CORE2_UCLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "i686-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinX86core2UclibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_i386=y
|
|
BR2_x86_core2=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_X86_CORE2_UCLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "i686-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinX86i686GlibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_i386=y
|
|
BR2_x86_i686=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_X86_I686_GLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "i686-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinX86i686GlibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_i386=y
|
|
BR2_x86_i686=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_X86_I686_GLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "i686-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinX86i686MuslBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_i386=y
|
|
BR2_x86_i686=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_X86_I686_MUSL_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "i686-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinX86i686MuslStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_i386=y
|
|
BR2_x86_i686=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_X86_I686_MUSL_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "i686-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinX86i686UclibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_i386=y
|
|
BR2_x86_i686=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_X86_I686_UCLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "i686-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinX86i686UclibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_i386=y
|
|
BR2_x86_i686=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_X86_I686_UCLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "i686-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinXtensalx60UclibcBleedingEdge(TestExternalToolchain):
|
|
config = """
|
|
BR2_xtensa=y
|
|
BR2_xtensa_fsf=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_XTENSA_LX60_UCLIBC_BLEEDING_EDGE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "xtensa-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|
|
|
|
|
|
class TestExternalToolchainBootlinXtensalx60UclibcStable(TestExternalToolchain):
|
|
config = """
|
|
BR2_xtensa=y
|
|
BR2_xtensa_fsf=y
|
|
BR2_TOOLCHAIN_EXTERNAL=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
|
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_XTENSA_LX60_UCLIBC_STABLE=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
"""
|
|
toolchain_prefix = "xtensa-linux"
|
|
|
|
def test_run(self):
|
|
TestExternalToolchain.common_check(self)
|