e83e6f4712
* Add Amber machine Introduce a new machine for Amber. Store it under Raspberry Pi boards since Amber is based on the Raspberry Pi Compute Module 4. This way we can reuse existing scripts. * Add kernel patches for Amber Add kernel patches which add a custom device tree for Amber. * Add device wipe support via GPIO button Allow to wipe the device by pressing and holding the red button. * Enable serial console by default Enable serial console on the on-board USB-to-UART adapter as well as on the GPIO header. * Use 64-bit mode by default Support only 64-bit for Amber, it is mature enough.
80 lines
2.5 KiB
Plaintext
80 lines
2.5 KiB
Plaintext
|
|
part start ${devtype} ${devnum} 6 dev_env
|
|
${devtype} dev ${devnum}
|
|
|
|
setenv loadbootstate " \
|
|
echo 'loading env...'; \
|
|
${devtype} read ${ramdisk_addr_r} ${dev_env} 0x20; \
|
|
env import -c ${ramdisk_addr_r} 0x4000;"
|
|
|
|
setenv storebootstate " \
|
|
echo 'storing env...'; \
|
|
env export -c -s 0x4000 ${ramdisk_addr_r} BOOT_ORDER BOOT_A_LEFT BOOT_B_LEFT MACHINE_ID; \
|
|
${devtype} write ${ramdisk_addr_r} ${dev_env} 0x20;"
|
|
|
|
run loadbootstate
|
|
test -n "${BOOT_ORDER}" || setenv BOOT_ORDER "A B"
|
|
test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3
|
|
test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3
|
|
|
|
# HassOS bootargs
|
|
setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor rootwait systemd.machine_id=${MACHINE_ID} cgroup_enable=memory fsck.repair=yes"
|
|
|
|
if gpio input GPIO27; then
|
|
sleep 1
|
|
if gpio input GPIO27; then
|
|
echo "Device wipe button has been pressed, setting wipe flag..."
|
|
setenv bootargs_hassos "${bootargs_hassos} haos.wipe=1"
|
|
fi
|
|
fi
|
|
|
|
# HassOS system A/B
|
|
setenv bootargs_a "root=PARTUUID=8d3d53e3-6d49-4c38-8349-aff6859e82fd rootfstype=squashfs ro"
|
|
setenv bootargs_b "root=PARTUUID=a3ec664e-32ce-4665-95ea-7ae90ce9aa20 rootfstype=squashfs ro"
|
|
|
|
# Preserve origin bootargs
|
|
setenv bootargs_rpi
|
|
setenv fdt_org ${fdt_addr}
|
|
fdt addr ${fdt_org}
|
|
fdt get value bootargs_rpi /chosen bootargs
|
|
|
|
setenv bootargs
|
|
for BOOT_SLOT in "${BOOT_ORDER}"; do
|
|
if test "x${bootargs}" != "x"; then
|
|
# skip remaining slots
|
|
elif test "x${BOOT_SLOT}" = "xA"; then
|
|
if test ${BOOT_A_LEFT} -gt 0; then
|
|
setexpr BOOT_A_LEFT ${BOOT_A_LEFT} - 1
|
|
echo "Trying to boot slot A, ${BOOT_A_LEFT} attempts remaining. Loading kernel ..."
|
|
if load ${devtype} ${devnum}:2 ${kernel_addr_r} Image; then
|
|
setenv bootargs "${bootargs_hassos} ${bootargs_rpi} ${bootargs_a} rauc.slot=A"
|
|
fi
|
|
fi
|
|
elif test "x${BOOT_SLOT}" = "xB"; then
|
|
if test ${BOOT_B_LEFT} -gt 0; then
|
|
setexpr BOOT_B_LEFT ${BOOT_B_LEFT} - 1
|
|
echo "Trying to boot slot B, ${BOOT_B_LEFT} attempts remaining. Loading kernel ..."
|
|
if load ${devtype} ${devnum}:4 ${kernel_addr_r} Image; then
|
|
setenv bootargs "${bootargs_hassos} ${bootargs_rpi} ${bootargs_b} rauc.slot=B"
|
|
fi
|
|
fi
|
|
fi
|
|
done
|
|
|
|
setenv fdt_addr
|
|
if test -n "${bootargs}"; then
|
|
run storebootstate
|
|
else
|
|
echo "No valid slot found, resetting tries to 3"
|
|
setenv BOOT_A_LEFT 3
|
|
setenv BOOT_B_LEFT 3
|
|
run storebootstate
|
|
reset
|
|
fi
|
|
|
|
echo "Starting kernel"
|
|
booti ${kernel_addr_r} - ${fdt_org}
|
|
|
|
echo "Boot failed, resetting..."
|
|
reset
|