1.0 KiB
1.0 KiB
Raspberry PI
Supported Hardware:
| Device | Board |
|---|---|
| Raspberry Pi A+/B/B+ | rpi |
| Raspberry Pi Zero | rpi |
| Raspberry Pi Zero W | rpi0-w |
| Raspberry Pi 2 B | rpi2 |
| Raspberry Pi 3 B/B+ | rpi3 / rpi3-64 |
Limitation 64bit
The 64bit version is under development by RPi-Team. It work very nice but it could have some impacts. Actual we see that the SDcard access with ext4 are a bit slower than on 32bit.
Serial console
For access to terminal over serial console, add console=ttyAMA0,115200 to cmdline.txt and enable_uart=1, dtoverlay=pi3-disable-bt into config.txt. GPIO pins are: 6 = GND / 8 = UART TXD / 10 = UART RXD.
I2C
Add dtparam=i2c1=on and dtparam=i2c_arm=on to config.txt. After that we create a module file on host with config usb stick or direct into /etc/modules-load.d.
rpi-i2c.conf:
i2c-dev
i2c-bcm2708
Tweaks
If you don't need bluetooth, disabled it with add dtoverlay=pi3-disable-bt into config.txt.