96e7e57fc4
* Add support for the Orange Pi Prime Signed-off-by: Alastair D'Silva <alastair@d-silva.org> * Update opi_prime_defconfig * Delete kernel.config * Update opi_prime_defconfig
468 B
468 B
Raspberry PI
Supported Hardware:
| Device | Board |
|---|---|
| Orange Pi Prime | opi-prime |
Serial console
The serial port on the Orange Pi Prime is a 3 pin header located between the power and reset buttons. The pins are labelled away from the board edge. Flow control must be disabled in order to send data. The serial specs are 3.3V TTL, 115200,8,n,1
I2C
Add dtparam=i2c0=on to cmdline.txt