a0871be6c0
* Update buildroot-patches for 2020.11-rc1 buildroot * Update buildroot to 2020.11-rc1 Signed-off-by: Stefan Agner <stefan@agner.ch> * Don't rely on sfdisk --list-free output The --list-free (-F) argument does not allow machine readable mode. And it seems that the output format changes over time (different spacing, using size postfixes instead of raw blocks). Use sfdisk json output and calculate free partition space ourselfs. This works for 2.35 and 2.36 and is more robust since we rely on output which is meant for scripts to parse. * Migrate defconfigs for Buildroot 2020.11-rc1 In particular, rename BR2_TARGET_UBOOT_BOOT_SCRIPT(_SOURCE) to BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT(_SOURCE). * Rebase/remove systemd patches for systemd 246 * Drop apparmor/libapparmor from buildroot-external * hassos-persists: use /run as directory for lockfiles The U-Boot tools use /var/lock by default which is not created any more by systemd by default (it is under tmpfiles legacy.conf, which we no longer install). * Disable systemd-update-done.service The service is not suited for pure read-only systems. In particular the service needs to be able to write a file in /etc and /var. Remove the service. Note: This is a static service and cannot be removed using systemd-preset. * Disable apparmor.service for now The service loads all default profiles. Some might actually cause problems. E.g. the profile for ping seems not to match our setup for /etc/resolv.conf: [85503.634653] audit: type=1400 audit(1605286002.684:236): apparmor="DENIED" operation="open" profile="ping" name="/run/resolv.conf" pid=27585 comm="ping" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
159 lines
4.9 KiB
Makefile
159 lines
4.9 KiB
Makefile
################################################################################
|
|
#
|
|
# exim
|
|
#
|
|
################################################################################
|
|
|
|
EXIM_VERSION = 4.94
|
|
EXIM_SOURCE = exim-$(EXIM_VERSION).tar.xz
|
|
EXIM_SITE = https://ftp.exim.org/pub/exim/exim4
|
|
EXIM_LICENSE = GPL-2.0+
|
|
EXIM_LICENSE_FILES = LICENCE
|
|
EXIM_DEPENDENCIES = host-berkeleydb host-pcre pcre berkeleydb host-pkgconf
|
|
|
|
# Modify a variable value. It must already exist in the file, either
|
|
# commented or not.
|
|
define exim-config-change # variable-name, variable-value
|
|
$(SED) 's,^[#[:space:]]*$1[[:space:]]*=.*$$,$1=$2,' \
|
|
$(@D)/Local/Makefile
|
|
endef
|
|
|
|
# Comment-out a variable. Has no effect if it does not exits.
|
|
define exim-config-unset # variable-name
|
|
$(SED) 's,^\([[:space:]]*$1[[:space:]]*=.*$$\),# \1,' \
|
|
$(@D)/Local/Makefile
|
|
endef
|
|
|
|
# Add a variable definition. It must not already exist in the file,
|
|
# otherwise it would be defined twice with potentially different values.
|
|
define exim-config-add # variable-name, variable-value
|
|
echo "$1=$2" >>$(@D)/Local/Makefile
|
|
endef
|
|
|
|
define EXIM_USE_CUSTOM_CONFIG_FILE
|
|
$(INSTALL) -m 0644 $(BR2_PACKAGE_EXIM_CUSTOM_CONFIG_FILE) \
|
|
$(@D)/Local/Makefile
|
|
endef
|
|
|
|
define EXIM_USE_DEFAULT_CONFIG_FILE
|
|
$(INSTALL) -m 0644 $(@D)/src/EDITME $(@D)/Local/Makefile
|
|
$(call exim-config-change,BIN_DIRECTORY,/usr/sbin)
|
|
$(call exim-config-change,CONFIGURE_FILE,/etc/exim/configure)
|
|
$(call exim-config-change,LOG_FILE_PATH,/var/log/exim/exim_%slog)
|
|
$(call exim-config-change,PID_FILE_PATH,/var/run/exim/exim.pid)
|
|
$(call exim-config-change,EXIM_USER,ref:exim)
|
|
$(call exim-config-change,EXIM_GROUP,mail)
|
|
$(call exim-config-change,TRANSPORT_LMTP,yes)
|
|
$(call exim-config-change,PCRE_LIBS,-lpcre)
|
|
$(call exim-config-change,PCRE_CONFIG,no)
|
|
$(call exim-config-change,HAVE_ICONV,no)
|
|
$(call exim-config-unset,EXIM_MONITOR)
|
|
$(call exim-config-change,AUTH_PLAINTEXT,yes)
|
|
$(call exim-config-change,AUTH_CRAM_MD5,yes)
|
|
$(call exim-config-unset,SUPPORT_DANE)
|
|
endef
|
|
|
|
ifeq ($(BR2_PACKAGE_DOVECOT),y)
|
|
EXIM_DEPENDENCIES += dovecot
|
|
define EXIM_USE_DEFAULT_CONFIG_FILE_DOVECOT
|
|
$(call exim-config-change,AUTH_DOVECOT,yes)
|
|
endef
|
|
endif
|
|
|
|
ifeq ($(BR2_PACKAGE_CLAMAV),y)
|
|
EXIM_DEPENDENCIES += clamav
|
|
define EXIM_USE_DEFAULT_CONFIG_FILE_CLAMAV
|
|
$(call exim-config-change,WITH_CONTENT_SCAN,yes)
|
|
endef
|
|
endif
|
|
|
|
ifeq ($(BR2_PACKAGE_OPENSSL),y)
|
|
EXIM_DEPENDENCIES += host-openssl openssl
|
|
define EXIM_USE_DEFAULT_CONFIG_FILE_OPENSSL
|
|
$(call exim-config-change,USE_OPENSSL,yes)
|
|
$(call exim-config-change,USE_OPENSSL_PC,openssl)
|
|
endef
|
|
else
|
|
define EXIM_USE_DEFAULT_CONFIG_FILE_OPENSSL
|
|
$(call exim-config-change,DISABLE_TLS,yes)
|
|
endef
|
|
endif
|
|
|
|
# musl does not provide struct ip_options nor struct ip_opts (but it is
|
|
# available with both glibc and uClibc)
|
|
ifeq ($(BR2_TOOLCHAIN_USES_MUSL),y)
|
|
define EXIM_FIX_IP_OPTIONS_FOR_MUSL
|
|
$(SED) 's/#define GLIBC_IP_OPTIONS/#define DARWIN_IP_OPTIONS/' \
|
|
$(@D)/OS/os.h-Linux
|
|
endef
|
|
endif
|
|
|
|
define EXIM_CONFIGURE_TOOLCHAIN
|
|
$(call exim-config-add,CC,$(TARGET_CC))
|
|
$(call exim-config-add,CFLAGS,$(TARGET_CFLAGS))
|
|
$(call exim-config-add,AR,$(TARGET_AR) cq)
|
|
$(call exim-config-add,RANLIB,$(TARGET_RANLIB))
|
|
$(call exim-config-add,HOSTCC,$(HOSTCC))
|
|
$(call exim-config-add,HOSTCFLAGS,$(HOSTCFLAGS))
|
|
$(EXIM_FIX_IP_OPTIONS_FOR_MUSL)
|
|
endef
|
|
|
|
ifneq ($(call qstrip,$(BR2_PACKAGE_EXIM_CUSTOM_CONFIG_FILE)),)
|
|
define EXIM_CONFIGURE_CMDS
|
|
$(EXIM_USE_CUSTOM_CONFIG_FILE)
|
|
$(EXIM_CONFIGURE_TOOLCHAIN)
|
|
endef
|
|
else # CUSTOM_CONFIG
|
|
define EXIM_CONFIGURE_CMDS
|
|
$(EXIM_USE_DEFAULT_CONFIG_FILE)
|
|
$(EXIM_USE_DEFAULT_CONFIG_FILE_DOVECOT)
|
|
$(EXIM_USE_DEFAULT_CONFIG_FILE_CLAMAV)
|
|
$(EXIM_USE_DEFAULT_CONFIG_FILE_OPENSSL)
|
|
$(EXIM_CONFIGURE_TOOLCHAIN)
|
|
endef
|
|
endif # CUSTOM_CONFIG
|
|
|
|
# exim needs a bit of love to build statically
|
|
ifeq ($(BR2_STATIC_LIBS),y)
|
|
EXIM_STATIC_FLAGS = LFLAGS="-pthread --static"
|
|
endif
|
|
|
|
# We need the host version of macro_predef during the build, before
|
|
# building it we need to prepare the makefile.
|
|
define EXIM_BUILD_CMDS
|
|
$(TARGET_MAKE_ENV) build=br $(MAKE) -C $(@D) makefile
|
|
$(HOST_MAKE_ENV) $(MAKE) -C $(@D)/build-br macro_predef \
|
|
CC="$(HOSTCC)" \
|
|
LNCC="$(HOSTCC)" \
|
|
CFLAGS="-std=c99 $(HOST_CFLAGS)" \
|
|
LFLAGS="-fPIC $(HOST_LDFLAGS)"
|
|
$(TARGET_MAKE_ENV) build=br $(MAKE) -C $(@D) $(EXIM_STATIC_FLAGS) \
|
|
CFLAGS="-std=c99 $(TARGET_CFLAGS)"
|
|
endef
|
|
|
|
# Need to replicate the LFLAGS in install, as exim still wants to build
|
|
# something when installing...
|
|
define EXIM_INSTALL_TARGET_CMDS
|
|
DESTDIR=$(TARGET_DIR) INSTALL_ARG="-no_chown -no_symlink" build=br \
|
|
$(MAKE) -C $(@D) $(EXIM_STATIC_FLAGS) \
|
|
CFLAGS="-std=c99 $(TARGET_CFLAGS)" \
|
|
install
|
|
chmod u+s $(TARGET_DIR)/usr/sbin/exim
|
|
endef
|
|
|
|
define EXIM_USERS
|
|
exim 88 mail 8 * - - - exim
|
|
endef
|
|
|
|
define EXIM_INSTALL_INIT_SYSV
|
|
$(INSTALL) -D -m 755 package/exim/S86exim \
|
|
$(TARGET_DIR)/etc/init.d/S86exim
|
|
endef
|
|
|
|
define EXIM_INSTALL_INIT_SYSTEMD
|
|
$(INSTALL) -D -m 644 package/exim/exim.service \
|
|
$(TARGET_DIR)/usr/lib/systemd/system/exim.service
|
|
endef
|
|
|
|
$(eval $(generic-package))
|