2e2f6e893b
* Fix Tinker Board S (eMMC) boot (#650) Use Tinker Board S U-Boot configuration which is capable to boot from eMMC as well as from SD card. Note that this makes U-Boot always claiming to run on Tinker Board S: .. Model: Rockchip RK3288 Asus Tinker Board S .. It seems that there is no generic Tinker Board configuration. However, Tinker Board S configuration really seems to work well with Tinker Board as well, so just use it. Also today the U-Boot Makefile seems to generate a working idbloader.img already. Drop our special handling. * Use Tinker Board S device tree if booting from eMMC for Linux Instead of patching the Tinker Board device tree, select the device tree based on what device we are booting from. Note: This boots the non-S device tree when booting a Tinker Board S from SD card! But there is no reliable detection otherwise, so let's just live with that fact. * Document how to use our U-Boot to flash eMMC
35 lines
1.1 KiB
Diff
35 lines
1.1 KiB
Diff
From 2af46619bb66af62bbfd2a880fe57d6dd0ec43fe Mon Sep 17 00:00:00 2001
|
|
Message-Id: <2af46619bb66af62bbfd2a880fe57d6dd0ec43fe.1599227174.git.stefan@agner.ch>
|
|
In-Reply-To: <74e929bc4713b76f58a8df82019d74078b4b8d0c.1599227174.git.stefan@agner.ch>
|
|
References: <74e929bc4713b76f58a8df82019d74078b4b8d0c.1599227174.git.stefan@agner.ch>
|
|
From: Stefan Agner <stefan@agner.ch>
|
|
Date: Fri, 4 Sep 2020 15:44:38 +0200
|
|
Subject: [PATCH 3/3] rockchip: dts: tinker: remove unnecessary node
|
|
|
|
The property reg-shift with the same value is present in the base
|
|
device tree already. Remove unnecessary node from rk3288-tinker.dts.
|
|
|
|
Signed-off-by: Stefan Agner <stefan@agner.ch>
|
|
---
|
|
arch/arm/dts/rk3288-tinker.dts | 4 ----
|
|
1 file changed, 4 deletions(-)
|
|
|
|
diff --git a/arch/arm/dts/rk3288-tinker.dts b/arch/arm/dts/rk3288-tinker.dts
|
|
index 338670123b..8b1848c310 100644
|
|
--- a/arch/arm/dts/rk3288-tinker.dts
|
|
+++ b/arch/arm/dts/rk3288-tinker.dts
|
|
@@ -27,10 +27,6 @@
|
|
status = "okay";
|
|
};
|
|
|
|
-&uart2 {
|
|
- reg-shift = <2>;
|
|
-};
|
|
-
|
|
&usb_host1 {
|
|
vbus-supply = <&vcc5v0_host>;
|
|
status = "okay";
|
|
--
|
|
2.28.0
|
|
|