2e2f6e893b
* Fix Tinker Board S (eMMC) boot (#650) Use Tinker Board S U-Boot configuration which is capable to boot from eMMC as well as from SD card. Note that this makes U-Boot always claiming to run on Tinker Board S: .. Model: Rockchip RK3288 Asus Tinker Board S .. It seems that there is no generic Tinker Board configuration. However, Tinker Board S configuration really seems to work well with Tinker Board as well, so just use it. Also today the U-Boot Makefile seems to generate a working idbloader.img already. Drop our special handling. * Use Tinker Board S device tree if booting from eMMC for Linux Instead of patching the Tinker Board device tree, select the device tree based on what device we are booting from. Note: This boots the non-S device tree when booting a Tinker Board S from SD card! But there is no reliable detection otherwise, so let's just live with that fact. * Document how to use our U-Boot to flash eMMC
26 lines
628 B
Bash
Executable File
26 lines
628 B
Bash
Executable File
#!/bin/bash
|
|
# shellcheck disable=SC2155
|
|
|
|
function hassos_pre_image() {
|
|
local BOOT_DATA="$(path_boot_dir)"
|
|
local SPL_IMG="$(path_spl_img)"
|
|
|
|
cp -t "${BOOT_DATA}" \
|
|
"${BINARIES_DIR}/boot.scr" \
|
|
"${BINARIES_DIR}/rk3288-tinker.dtb" \
|
|
"${BINARIES_DIR}/rk3288-tinker-s.dtb"
|
|
|
|
echo "console=tty1" > "${BOOT_DATA}/cmdline.txt"
|
|
|
|
# SPL
|
|
create_spl_image
|
|
|
|
dd if="${BINARIES_DIR}/idbloader.img" of="${SPL_IMG}" conv=notrunc bs=512 seek=64
|
|
dd if="${BINARIES_DIR}/u-boot-dtb.img" of="${SPL_IMG}" conv=notrunc bs=512 seek=8192
|
|
}
|
|
|
|
|
|
function hassos_post_image() {
|
|
convert_disk_image_gz
|
|
}
|