operating-system

Files

Stefan Agner f358f322da Bump Buildroot to 2021.02-rc3 (#1260 )

* Rebase patches to Buildroot 2021.02-rc3

* Update Buildroot to 2021.02-rc3

* Declare Kernel headers to be Linux version 5.10 (since they are, and new Buildroot knows about 5.10)

2021-03-04 00:50:33 +01:00

fs-overlay-graphical/etc

Add buildroot 2018-02

2018-03-17 23:47:00 +00:00

genimage.cfg

Bump Buildroot to 2021.02-rc3 (#1260 )

2021-03-04 00:50:33 +01:00

grub.cfg

Bump Buildroot to 2021.02-rc3 (#1260 )

2021-03-04 00:50:33 +01:00

linux.config

Bump Buildroot to 2021.02-rc3 (#1260 )

2021-03-04 00:50:33 +01:00

post-build.sh

Add buildroot 2018-02

2018-03-17 23:47:00 +00:00

readme.txt

Add buildroot 2018-02

2018-03-17 23:47:00 +00:00

readme.txt

How to get started with the MinnowBoard MAX
===========================================

1. Build

  Apply the defconfig:

  $ make minnowboard_max_defconfig

  Add any additional packages required and build:

  $ make

2. Write the SD card

  The build process will create a SD card image in output/images.
  Write the image to an mSD card, insert into the MinnowBoard MAX
  and power the board on.

  $ dd if=output/images/sdcard.img of=/dev/mmcblk0; sync

  The system starts two consoles: one on the serial port
  and one on HDMI.

3. Enjoy

Additional information about this board can be found at
http://www.minnowboard.org/.