# Custom modeline!
# To use custom modeline you need to disable all the below resolutions
# and setup your own!
# For more information check our wiki:
# http://odroid.com/dokuwiki/doku.php?id=en:c2_hdmi_autosetting
# Example below:
#m=custombuilt
#modeline=1920,1200,154000,74040,60,1920,1968,2000,2080,1200,1202,1208,1235,1,0,1

# 480 Lines (720x480)
#m=480i60hz
#m=480i_rpt
#m=480p60hz
#m=480p_rpt

# 576 Lines (720x576)
#m=576i50hz
#m=576i_rpt
#m=576p50hz
#m=576p_rpt

# 720 Lines (1280x720)
#m=720p50hz
#m=720p60hz

# 1080 Lines (1920x1080)
#m=1080i60hz
m=1080p60hz
#m=1080i50hz
#m=1080p50hz
#m=1080p24hz

# 4K (3840x2160)
#m=2160p30hz
#m=2160p25hz
#m=2160p24hz
#m=smpte24hz
#m=2160p50hz
#m=2160p60hz
#m=2160p50hz420
#m=2160p60hz420

### VESA modes ###
#m=640x480p60hz
#m=800x480p60hz
#m=480x800p60hz
#m=800x600p60hz
#m=1024x600p60hz
#m=1024x768p60hz
#m=1280x800p60hz
#m=1280x1024p60hz
#m=1360x768p60hz
#m=1440x900p60hz
#m=1600x900p60hz
#m=1680x1050p60hz
#m=1600x1200p60hz
#m=1920x1200p60hz
#m=2560x1080p60hz
#m=2560x1440p60hz
#m=2560x1600p60hz
#m=3440x1440p60hz

# HDMI BPP Mode
m_bpp=32
#m_bpp=24
#m_bpp=16

# HDMI DVI/VGA modes
# By default its set to HDMI, if needed change below.
# Uncomment only a single Line.
#vout=dvi
#vout=vga

# HDMI HotPlug Detection control
# Allows you to force HDMI thinking that the cable is connected.
# true = HDMI will believe that cable is always connected
# false = will let board/monitor negotiate the connection status
hpd=true
#hpd=false

# Monitor output
# Controls if HDMI PHY should output anything to the monitor
monitor_onoff=false

# Server Mode (aka. No Graphics)
# Setting nographics to 1 will disable all video subsystem
# This mode is ideal of server type usage. (Saves ~300Mb of RAM)
nographics=0

# Meson Timer
# 1 - Meson Timer
# 0 - Arch Timer
# Using meson_timer improves the video playback however it breaks KVM (virtualization).
# Using arch timer allows KVM/Virtualization to work however you'll experience poor video
mesontimer=1

# UHS (Ultra High Speed) MicroSD mode enable/disable
disableuhs=false

# MicroSD Card Detection enable/disable
# Force the MMC controlled to believe that a card is connected.
mmc_removable=true

# USB Multi WebCam tweak
# Only enable this if you use it.
usbmulticam=false

# CPU Frequency / Cores control
###########################################
### WARNING!!! WARNING!!! WARNING!!!
# Before changing anything here please read the wiki entry:
# http://odroid.com/dokuwiki/doku.php?id=en:c2_set_cpu_freq
#
# MAX CPU's
#maxcpus=1
#maxcpus=2
#maxcpus=3
maxcpus=4

# MAX Frequency
#max_freq=2016
#max_freq=1944
#max_freq=1944
#max_freq=1920
#max_freq=1896
#max_freq=1752
#max_freq=1680
#max_freq=1656
max_freq=1536