* RaspberryPi: Update kernel 5.15.61 - 1.20220830
* Add Yellow to the Raspberry Pi kernel update script
* Bump Yellow to kernel 5.15.61 - 1.20220830
Also drop the work around for the LED polarity as the new firmware
has been fixed.
* Explicitly select no kernel module compression
Home Assistant OS uses a compressed rootfs already, no compression for
kernel modules necessary.
* Bump buildroot
* buildroot d7e4c223e5...5468d36a26 (1):
> package/rpi-firmware: bump version to 1.20220830
* Bump buildroot
* buildroot 99b62b8bd3...97287bbebf (3):
> package/dbus-broker: bump to release 32
> package/dbus-broker: new package
> Merge pull request #3 from home-assistant/2022.02.x-haos-cgroup-v2
* Use dbus-broker as default D-Bus broker
The dbus-broker (Linux D-Bus Message Broker) aims to be a high
performance and reliable D-Bus broker which can be used as a drop in
replacement to the reference implementation D-Bus broker. In tests it
showed significantly better performance especially when routing BLE
messages.
* Allow dbus-broker to start early
For HAOS device wipe feature we need haos-agent.service and
udisk2.service early. Both require a working D-Bus broker.
The options PrivateTmp and PrivateDevices add additional After=
orderings which doesn't allow dbus-broker to be started early.
* Fix D-Bus dependency
D-Bus services should just depend on dbus.socket.
* Recreate defconfigs using savedefconfig target
Buildroot allows to generate minimal defconfigs using the savedefconfig
target. Regenerate all our configurations so they all look alive and are
minimalistc.
* Fix generic_aarch64_defconfig
The Google Gasket driver has been removed from the main kernels staging
tree between 5.10 and 5.15 development window. Readd Google's
out-of-tree driver to continiue support Google Coral devices.
* Enable wext and nl80211 drivers for wpa_supplicant for all devices
* Enable r8188eu module globally and add related firmware to all devices config
Co-authored-by: Stefan Agner <stefan@agner.ch>
* Add tempio host package
tempio is a template helper using Go's template engine and sprig
functions.
* Use tempio to generate rauc manifest
* Use tempio to generate rauc system.conf
* Add generic-aarch64 to the list of Kernels
* Bump buildroot
* buildroot 8bbb32c16a...962ff8c0d4 (1):
> package/rtl8812au-aircrack-ng: bump version to 3a6402e
* Fix kernel version for Raspberry Pi kernel based boards
* Linux: Update kernel 5.15.25
Use highest available kernel version in Buildroot 2021.08 (5.13)
* Update Hardkernel patches to Linux 5.15
* Update generic-x86-64/ova kernel config/patches for 5.15
* Drop Intel e1000e Sourceforge driver
The driver has been discontinued sometime last year. The main reason the
out-of-tree kernel has been enabled was for support for the i219-V
network chips which meanwhile are supported in mainline.
* Bump buildroot
* buildroot 907739ed48...4c6c8fb767 (1):
> package/rpi-firmware: bump version to 71bd3109
* RaspberryPi: Update kernel 5.10.63 - oldstable_20211201
* Add Raspberry Pi Zero 2 W device tree
* Add systemd-journal-remote to the image
This allows to access journald's log from within Supervisor and expose
more system logs to users.
* Allow to access systemd-journal-gatewayd from Supervisor
Create a systemd-journal-gatewayd.socket service using a Unix socket and
bind mount it into the Supervisor container. This allows to query
systemd-journald from Supervisor directly.
* Bump buildroot
* buildroot 73991f0fee...5b5dff3136 (1):
> package/linux-firmware: Add RTL8152/8153/8156 firmware
* Enable Realtek 8152/8153/8156 USB Ethernet adapter support
Enable kernel driver and install firmware for Realtek USB Ethernet
adapter. While at it, also enable some other common USB Ethernet
adapters which don't require firmwares.
* Bump to Buildroot 2021.08.1
Move to Buildroot 2021.08.1 using the 2021.08.x-haos branch. Some
patches on the previous branch 2021.02.x-haos have been applied upstream
meanwhile. Others required rather trivial rebasing.
This latest Buildroot release brings new versions of the following
components:
- glibc 2.33
- systemd 249.3
- Networkmanager 1.32.2
- BlueZ 5.60
- Docker 20.10.8
The patch "Fix dhcp client" seems not to be necessary anymore. The
directory /var/lib/dhcp seems not in use when NetworkManager invokes
dhclient. It seems the leases which are typically stored in that
directory are managed inside NetworkManager.
* buildroot 2021.08.1..2021.08.x-haos (6)
> package/rpi-firmware: bump version to 1.20210805
> package/rpi-wifi-firmware: bump version to 883b726
> package/linux-firmware: add rtl8761b/rtl8761bu firmware
> package/docker-proxy: bump version to 64b7a4574d14
> package/rpi-firmware: Allow to deploy multiple firmware files
> network-manager: wpa_supplicant
* Bump Raspberry Pi Bluetooth helper scripts
With the update to Buildroot 2021.08.1, the bthelper fails with an error
org.bluez.Error.Busy when trying to power off the device. Presumably this
is a race condition which surfaced due to a change in Bluez 5.60:
348feb005a
Oct 11 14:32:21 homeassistant systemd[1]: Reached target Bluetooth Support.
...
Oct 11 14:32:21 homeassistant bluetoothd[412]: Bluetooth management interface 1.18 initialized
Oct 11 14:32:21 homeassistant systemd[1]: Started Raspberry Pi bluetooth helper.
Oct 11 14:32:21 homeassistant bthelper[417]: Raspberry Pi BDADDR already set
Oct 11 14:32:21 homeassistant bthelper[426]: [58B blob data]
Oct 11 14:32:21 homeassistant bthelper[426]: [59B blob data]
Oct 11 14:32:21 homeassistant bthelper[426]: Failed to set power off: org.bluez.Error.Busy
Oct 11 14:32:21 homeassistant systemd[1]: bthelper@hci0.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 14:32:21 homeassistant systemd[1]: bthelper@hci0.service: Failed with result 'exit-code'.
The latest version of the pi-bluetooth package introduced a sleep before
powering off the device, however, presumably for a different reason:
ae2efdeee8 (diff-609c8a23261988c47afd40be9b012feb1d167de8761c1301e44e1864635c19e3)
Anyways, this latest version seems to also fix the above mentioned race
condition.
The bump to U-Boot 2021.10-rc5 also makes quite some patches obsolete
since they are already part of U-Boot.
This also removes a patch which disables framebuffer support on
Raspberry Pi: Framebuffer support seems to work fine in todays
U-Boot/Linux combination. It can help debug boot problems on Raspberry
Pi devices. Without the patch framebuffer support will be enabled by
default.
The CRDA (Central Regulatory Domain Agent) utility has been used as a
user space helper to load regulatory information for WiFi drivers.
However, since Linux 4.15 the kernel can load the regulatory information
directly from a signed firmware file "regulatory.db".
The regulatory.db file is provided by the WIRELESS_REGDB package, which
has been already installed since its a dependency of CRDA.
Drop CRDA and select WIRELESS_REGDB package explicitly to make sure the
regulatory.db file is present.
LVM2 is not really required in the embedded use case. Opt out of
installing the standard installation which will install only dmsetup.
This requires a backported fix for the lvm2 package to not install
unnecessary systemd services.
Fixes: #1448
* Start ha-cli on tty1 instead of a getty
Instead of starting a getty start the ha-cli directly. This will show
the banner right on startup with the important information such as IP
address of the instance or the URL to reach it.
* Use default shell as root shell instead of HA CLI
Instead of using the ha-cli.sh script as login shell use the regular
shell. Amongst other things, this allows to run VS Code devcontainers
remotely via SSH or using scp. The HA CLI is still available using the
`ha` command.
* add eq3_char_loop package (eQ-3 char loopback kernel module)
* add generic_raw_uart package (low-latency raw UART kernel driver)
* add rpi-rf-mod package
* add device tree overlay support for RPI-RF-MOD/HM-MOD-RPI-PCB on Raspberry Pi
* enable GPIOLIB and GPIO_SYSFS required for RPI-RF-MOD/HM-MOD-RPI-PCB support.
* add basic RPI-RF-MOD/HM-MOD-RPI-PCB support for ASUS Tinker Board
* add device tree overlay support for ASUS Tinker Board and add
haos-config.txt loading support to U-Boot boot script
* Re-add patches missed with U-Boot 2021.04-rc4 upgrade
Also add patches for Raspberry Pi again.
* Regenerate patches for U-Boot 2021.04
* Update to U-Boot 2021.04
* Add udisks2 package
Add latest release of udisks2 as a package. Also disable polkit to avoid
excessive dependencies.
* Add udisks2 and os-agent to Home Assistant OS
* Bump OS Agent to latest version with udisks support
* Add RTL87xx/RTL88xx Bluetooth firmware
Enable Realtek Bluetooth dongles by adding firmware for RTL87xx and
RTL8xx devices.
* Enable Wireless firmwares for OVA and Generic x86-64 machines
Virtual machines might use hardware pass through functionality to get
direct access to wireless hardware. Add all firmwares we use in Generic
x86-64 image also to the OVA image. Also enable Ralink devices for the
two machines.
* Add RTL87xx/RTL88xx Bluetooth firmwares (#1273)
Add RTL87xx/RTL88xx Bluetooth to all devices without on-board Bluetooth.
Bump to the latest U-Boot release 2021.04-rc4. This alows to drop quite
some patches which have been sent to the mailing list or picked from the
mailing list and have been merged upstream now.
* Rebase patches to Buildroot 2021.02-rc3
* Update Buildroot to 2021.02-rc3
* Declare Kernel headers to be Linux version 5.10 (since they are, and new Buildroot knows about 5.10)
Move to the new Linux 5.10 based kernel for all Raspberry Pi boards.
This uses the version of the last OS version used in Raspberry Pi OS
raspberrypi-kernel_1.20210201-1.
* Add Ralink rt27xx/rt28xx/rt30xx firmware (#1242)
Add Ralink firmware for devices which have the driver enabled. The
firmware's are rather small at 20KiB in total.
* Remove Ralink and other WiFi drivers from Tinker Board
The board has on-board WiFi, no need for Ralink drivers to be enabled.
* Add Ralink WiFi drivers and firmware to ODROID boards
* Use systemd-growfs instead of resize2fs (#1106)
Since systemd 236 systemd has a built-in file system growing mechanism.
The mechanism relies on the kernels online file system resize
capabilities instead of the external resize2fs utility. Online resizing
is supposedly much faster since the kernel takes care of things.
This also makes sure that external file systems get resized which
previously have not been taken care of.
* Drop HA OS specific file system resizing
Since we have systemd-growfs in place now we can drop our file system
resizing code.
* Make sure /dev/disk/by-label/hassos-data is present after resizing
Note: systemd will retry mnt-data.mount later, so at least in theory
this shouldn't really matter. However, the journal has a lot of churn
due to that reordering.
* Rewrite datactl command
Prepare the target partition as part of the datactl command. Rely on
partlabel for the target disk since we are always using GPT on the
target disk. Use systemd and partlabel mechanism to wait and find
the target data disk. Keep using the file system label to identify
the source disk.
Also use e2image instead of raw dd to move data. This should
speed up the processes significantly.
* Fix corner case when reusing same disk again
* Update buildroot-patches for 2020.11-rc1 buildroot
* Update buildroot to 2020.11-rc1
Signed-off-by: Stefan Agner <stefan@agner.ch>
* Don't rely on sfdisk --list-free output
The --list-free (-F) argument does not allow machine readable mode. And
it seems that the output format changes over time (different spacing,
using size postfixes instead of raw blocks).
Use sfdisk json output and calculate free partition space ourselfs. This
works for 2.35 and 2.36 and is more robust since we rely on output which
is meant for scripts to parse.
* Migrate defconfigs for Buildroot 2020.11-rc1
In particular, rename BR2_TARGET_UBOOT_BOOT_SCRIPT(_SOURCE) to
BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT(_SOURCE).
* Rebase/remove systemd patches for systemd 246
* Drop apparmor/libapparmor from buildroot-external
* hassos-persists: use /run as directory for lockfiles
The U-Boot tools use /var/lock by default which is not created any more
by systemd by default (it is under tmpfiles legacy.conf, which we no
longer install).
* Disable systemd-update-done.service
The service is not suited for pure read-only systems. In particular the
service needs to be able to write a file in /etc and /var. Remove the
service. Note: This is a static service and cannot be removed using
systemd-preset.
* Disable apparmor.service for now
The service loads all default profiles. Some might actually cause
problems. E.g. the profile for ping seems not to match our setup for
/etc/resolv.conf:
[85503.634653] audit: type=1400 audit(1605286002.684:236): apparmor="DENIED" operation="open" profile="ping" name="/run/resolv.conf" pid=27585 comm="ping" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
