The cgroup_enable parameter is a Raspberry Pi kernel specific kernel
parameter. Upstream based kernel do not have the parameter, and hence
do not do anything.
This gets rid of the following message during boot:
Unknown kernel command line parameters "cgroup_enable=memory", will be passed to user space.
* RaspberryPi: Update kernel 5.15.61 - 1.20220830
* Add Yellow to the Raspberry Pi kernel update script
* Bump Yellow to kernel 5.15.61 - 1.20220830
Also drop the work around for the LED polarity as the new firmware
has been fixed.
* Explicitly select no kernel module compression
Home Assistant OS uses a compressed rootfs already, no compression for
kernel modules necessary.
* Bump buildroot
* buildroot d7e4c223e5...5468d36a26 (1):
> package/rpi-firmware: bump version to 1.20220830
* Retry up to 3 times
By default, HAOS used to retry 3 times. That is still true for U-Boot
based boards. Apply the same logic for GRUB2 based systems for
consistency.
This can help to remedy intermittent internet/connectivity issuese.
Altough hacky, in practise it makes sense to give the newly installed OS
another go.
* Also apply to generic-aarch64
* rpi4: Enable arm_boost=1 to unlock 1.8Ghz CPU
The official Raspberry Pi OS enables a "boosted" 1.8GHz
mode since their Debian bullseye based release [source]. This
commit brings this feature to HA OS.
* Disable real-time scheduling
It seems that Linux' cgroup v2 currenlty does not support RT scheduling.
* Remove Supervisor RT support flag
With CGroups v2 we can no longer support CPU resource allocation for
realtime scheduling.
* Bump OS Agent to 1.3.0 for CGroups v2 support
This makes the Red+Blue Button cause the boot loader to wipe start4.elf,
which is essential for the boot loader to boot from eMMC. With the file
missing, the Raspberry Pi firmware will continue its boot flow and boot
from USB host next. This allows to run the Home Assistant OS Installer
from a USB flash drive again.
For phyiscal hardware the default Power Button action has been disabled
to avoid accidentally power down the machine.
However, for virtual machine this method is often used to shutdown the
virtual machine gracefully. Use the regular power settings for virtual
machines.
* Use upstream Linux driver for Bluetooth on ASUS Tinker
* Drop unnecessary Bluetooth initialization systemd service
Bluetooth is now entirely handled by the kernel.
* Enable additional LED triggers
* Improve Yellow device tree
Fix soundcard name and use BTN_1 as key code.
* Add input-event-daemon configuration
Add minimal input-event-daemon configuration to avoid the default
configuration taking effect. This minimal configuration triggers
the USB configuration import on button press.
Add VID/PID of some known problematic USB SSD controllers to USB storage
quirk list. This should make most USB SSD's work with Home Assistant OS
out-of-the box.
This aligns with what we used to have in Barebox. Most of the time the
user is not expected to make a choice, so keeping the timeout short is
sensible.
* Linux: Update kernel 5.15.25
Use highest available kernel version in Buildroot 2021.08 (5.13)
* Update Hardkernel patches to Linux 5.15
* Update generic-x86-64/ova kernel config/patches for 5.15
* Drop Intel e1000e Sourceforge driver
The driver has been discontinued sometime last year. The main reason the
out-of-tree kernel has been enabled was for support for the i219-V
network chips which meanwhile are supported in mainline.
* Fix migration from Barebox GRUB
Create GRUB env which defaults to the boot slot we are updating to. This
makes sure that the newly installed OS version will be booted on next
reboot even if installed on boot slot B.
* Add AArch64/ARM64 EFI boot support (for QEMU and some boards)
* Allow GRUB to load cmdline.txt-like
* Enable qcow2/vmdk disk images
Co-authored-by: Stefan Agner <stefan@agner.ch>
To make HDMI CEC work, we have to compile MESON_DRM as a module
(see #1717). However, this essentially reverts #1347, which fixed the
reboot problem by compiling the driver into the kernel.
Hence we need to reintroduce the earlier fix from #1345, which reverts
the offending commit causing the reboot problem.
* Fix enable USB host mode kernel patch
Update to a new patch which applies the device tree change such that the
USB controller actually gets enabled.
* Update Home Assistant Yellow board config
Update config to match changes which have been made to other baords as
well.
* Rename Home Assistant Amber to Yellow
Rename the board from "amber" to "yellow" as Home Assistant Yellow is
the official name now.
* Add Home Assistant Yellow to the build matrix
* Use LSI Logic SCSI controller in vmdk descriptor as well
For some reason, the vmdk disk format's descriptor contains the
controller type as well. By default, qemu-img sets it to "ide", which
seems not optimal especially for VMware's ESXi. Set adapter type to
commonly supported "lsilogic".
* Move ova image generation to hdd-image.sh
* Use OpenSSL to generate OVA manifest file (#826)
It seems that sha256sum adds a space after the hash algorithm which
causes "Invalid OVF checksum algorithm" on certain VMware virtualization
products.
Using OpenSSL avoids the space and makes the manifest file compatible
wiht VMware products.
* Use Buildroot provided OpenSSL binary
* Use SCSI controller by default
