* updated generic_raw_uart to latest version which comes with dualcopro
support for the HmIP-RFUSB usb rf-sticks by eQ3/ELV.
* remove 99-hmip-rfusb.rules to keep a HmIP-RFUSB device free from being
occupied by the cp210x driver but use the new generic_raw_uart support
instead allowing for advanced dualcopro support for HomeMatic/BidCos-RF
and homematicIP support in parallel.
* Add systemd-journal-remote to the image
This allows to access journald's log from within Supervisor and expose
more system logs to users.
* Allow to access systemd-journal-gatewayd from Supervisor
Create a systemd-journal-gatewayd.socket service using a Unix socket and
bind mount it into the Supervisor container. This allows to query
systemd-journald from Supervisor directly.
Currently the hassos-apparmor.service wants the
hassos-supervisor.service and vice-versa. This is unnecessary and leads
to activation of hassos-supervisor.service when reload/restart
hassos-apparmor.service (Supervisor is doing that on startup).
Make hassos-apparmor.service independent and add dependency as well as
ordering from hassos-supervisor.service side.
Since we start the HomeAssistant shell directly on tty the service
responsible for starting did not restart the shell on exit. Remove the
RemainAfterExit flag to make sure that the shell restarts on exit.
* Start ha-cli on tty1 instead of a getty
Instead of starting a getty start the ha-cli directly. This will show
the banner right on startup with the important information such as IP
address of the instance or the URL to reach it.
* Use default shell as root shell instead of HA CLI
Instead of using the ha-cli.sh script as login shell use the regular
shell. Amongst other things, this allows to run VS Code devcontainers
remotely via SSH or using scp. The HA CLI is still available using the
`ha` command.
* Enable systemd-time-wait-sync.service by default
Enable the systemd-time-wait-sync.service by default. This allows to use
the time-sync.target which allows to make sure services only get started
once the time is synchronized.
* Make sure time is synchronized when starting hassos-supervisor.service
Use the time-sync.target to make sure that the Supervisor gets stsarted
after the time has been synchronized.
* Set timeout for systemd-time-wait-sync.service
Don't delay startup forever in case time synchronization doesn't work.
This allows to boot the system even without Internet connection.
The latest version of OS Agent sets haos.wipe=1 as kernel argument to
trigger a device wipe. Let systemd pickup this kernel command line
argument and start haos-wipe.service.
This rather complex architecture allows to add other triggers in the
future, e.g. a button read in the boot loader.
There are incident reports on the internet where poeple report that
fsck.(v)fat actually leads to problems rather file system fixes. Around
the time when Home Assistant OS added fsck.fat for the boot partition,
reports of empty boot partitions or file with weired filenames started
to appear. This could be caused by fsck.fat.
Disable fsck on the boot partition.
Use udev rules to set the CPU online. For memory, we let the kernel
bring memory online automatically. This is preferred as udev rule
processing might be delayed in a low memory situation, see:
https://lwn.net/Articles/668944/
The supervisor container requires the "hassio-supervisor" AppArmor
profile. Make sure our AppArmor service hassos-apparmor is a dependency
of the hassos-supervisor.service.
* Use systemd-growfs instead of resize2fs (#1106)
Since systemd 236 systemd has a built-in file system growing mechanism.
The mechanism relies on the kernels online file system resize
capabilities instead of the external resize2fs utility. Online resizing
is supposedly much faster since the kernel takes care of things.
This also makes sure that external file systems get resized which
previously have not been taken care of.
* Drop HA OS specific file system resizing
Since we have systemd-growfs in place now we can drop our file system
resizing code.
* Make sure /dev/disk/by-label/hassos-data is present after resizing
Note: systemd will retry mnt-data.mount later, so at least in theory
this shouldn't really matter. However, the journal has a lot of churn
due to that reordering.
When we write the update to the boot partiton, there is nothing which
makes sure that data is written to disk. This leaves a rather large
window (probably around 30s) where a machine reset/poweroff can lead
to a corrupted boot partition. Use the sync mount option to minimize the
corruption window.
Note that sync is not ideal for flash drives normally. But since we
write very little and typically only on OS update to the boot partition,
this shouldn't be a problem.
* Avoid waiting for external drive unnecessarily
Even though the condition to start hassos-data.service is not met (the
file /mnt/overlay/data-move is not there by default), it seems that
systemd waits for the dependencies for hassos-data.service. Don't
Require or Wants any dependencies which might not be present by
default.
* Use systemd to wait for partition using partlabel device
* Use sfdisk which allows to wipe filesystem signatures
Even though we zap the partition table using sgdisk, the file system
superblock (which contains the file system label) does survive. This
can cause problems when trying to reuse a disk previously already
labeled using hassos-data: It might take precendence on next boot
over the existing data partition on the eMMC.
Make sure to clean all file system signatures using sfdisk.
* Make the datactl command more robust
Validate target disk (partition) size to avoid a copy attempt which will
fail. If e2image operation fails, make sure the leftover copy is not
regonized as data partition.
* Fix hassos-data service device unit dependencies
* Rewrite datactl command
Prepare the target partition as part of the datactl command. Rely on
partlabel for the target disk since we are always using GPT on the
target disk. Use systemd and partlabel mechanism to wait and find
the target data disk. Keep using the file system label to identify
the source disk.
Also use e2image instead of raw dd to move data. This should
speed up the processes significantly.
* Fix corner case when reusing same disk again
* Remove busybox Linux module support
Since systemd relies on the upstream Linux kernel module handling
utility "kmod" the busybox implementations are not required. Already
today the official "kmod" utility takes precedence:
haos # ls -la /usr/sbin/*mod*
lrwxrwxrwx 1 root root 11 Nov 11 11:32 /usr/sbin/depmod -> ../bin/kmod
lrwxrwxrwx 1 root root 11 Nov 11 11:32 /usr/sbin/insmod -> ../bin/kmod
lrwxrwxrwx 1 root root 11 Nov 11 11:32 /usr/sbin/lsmod -> ../bin/kmod
lrwxrwxrwx 1 root root 11 Nov 11 11:32 /usr/sbin/modinfo -> ../bin/kmod
lrwxrwxrwx 1 root root 11 Nov 11 11:32 /usr/sbin/modprobe -> ../bin/kmod
lrwxrwxrwx 1 root root 11 Nov 11 11:32 /usr/sbin/rmmod -> ../bin/kmod
* Move modprobe configuration alsa-base.conf to correct location
The official modprobe package from kmod checks three locations:
/etc/modprobe.d/, /lib/modprobe.d/ and /run/modprobe.d/. Since usr-move
/lib is a symlink to /usr/lib, the correct location for distribution
provided modprobe files is /usr/lib/modprobe.d.
* Update buildroot-patches for 2020.11-rc1 buildroot
* Update buildroot to 2020.11-rc1
Signed-off-by: Stefan Agner <stefan@agner.ch>
* Don't rely on sfdisk --list-free output
The --list-free (-F) argument does not allow machine readable mode. And
it seems that the output format changes over time (different spacing,
using size postfixes instead of raw blocks).
Use sfdisk json output and calculate free partition space ourselfs. This
works for 2.35 and 2.36 and is more robust since we rely on output which
is meant for scripts to parse.
* Migrate defconfigs for Buildroot 2020.11-rc1
In particular, rename BR2_TARGET_UBOOT_BOOT_SCRIPT(_SOURCE) to
BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT(_SOURCE).
* Rebase/remove systemd patches for systemd 246
* Drop apparmor/libapparmor from buildroot-external
* hassos-persists: use /run as directory for lockfiles
The U-Boot tools use /var/lock by default which is not created any more
by systemd by default (it is under tmpfiles legacy.conf, which we no
longer install).
* Disable systemd-update-done.service
The service is not suited for pure read-only systems. In particular the
service needs to be able to write a file in /etc and /var. Remove the
service. Note: This is a static service and cannot be removed using
systemd-preset.
* Disable apparmor.service for now
The service loads all default profiles. Some might actually cause
problems. E.g. the profile for ping seems not to match our setup for
/etc/resolv.conf:
[85503.634653] audit: type=1400 audit(1605286002.684:236): apparmor="DENIED" operation="open" profile="ping" name="/run/resolv.conf" pid=27585 comm="ping" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
Drop AVAHI and use systemd-resolved to announce hostname via mDNS
and LLMNR. Also continue to offer the _workstation._tcp.local service
since it is used by the CoreDNS mDNS plug-in.
In case a container image is corrupted `docker inspect` might fail:
# docker inspect --format='{{.Id}}' "${SUPERVISOR_IMAGE}"
Error response from daemon: readlink /mnt/data/docker/overlay2: invalid argument
In that same state the `docker images` command still shows the images.
Since `docker inspect` returns an error SUPERVISOR_IMAGE_ID will be empty
and a simple `docker pull` will be attempted. That does not suffice to
recover from a corrupted container image.
Use `docker images` to get the image ids and make sure to delete all
image ids found by that command.
Also don't use RuntimeDirectory since it deletes the runtime directory
between the service start attempts which defeats the purpose.
* Simplify self healing capabilities of Supervisor service
Instead of relying on time based information on how long the container
has been running use a startup marker file to infer if the last startup
has been successful.
* Update buildroot-external/rootfs-overlay/usr/sbin/hassos-supervisor
Co-authored-by: Pascal Vizeli <pascal.vizeli@syshack.ch>
Co-authored-by: Pascal Vizeli <pascal.vizeli@syshack.ch>
* automatically fsck to repair partitions
* add fsck.fat so rpi boot partition can be repaired
* Use Wants= instead of Requires=
Co-authored-by: Pascal Vizeli <pascal.vizeli@syshack.ch>
* add dosfstools to all images
* run hassos-data and hassos-expand after fsck
Co-authored-by: Pascal Vizeli <pascal.vizeli@syshack.ch>
The Docker socket path is /run/docker.sock. Also only one path can be
used per property. This fixes the supervisor service, which currently
refuses to start due to missing Docker socket.
dhclient and systemd-journald will be running during shutdown and are
only killed in the final shutdown fase. Unmounting the directories
they use will fail. Use lazy unmouting to fix this.
On systems where ACPI support is present as inidcated by the presence of
/proc/acpi (e.g. on OVA compatible hypervisors), we want to properly
shut down the system when the power button is pressed (or the hypervisor
simulates this kind of event to the guest machine that executes hassos).
This changeset provides the following basic infrastructure for this
feature to work as expected:
* a systemd service to start acpid, if ACPI support can be assumed
* an acpid configuration directory
* a trivial shutdown script to invoke when a PWR event is registered
