The CRDA (Central Regulatory Domain Agent) utility has been used as a
user space helper to load regulatory information for WiFi drivers.
However, since Linux 4.15 the kernel can load the regulatory information
directly from a signed firmware file "regulatory.db".
The regulatory.db file is provided by the WIRELESS_REGDB package, which
has been already installed since its a dependency of CRDA.
Drop CRDA and select WIRELESS_REGDB package explicitly to make sure the
regulatory.db file is present.
LVM2 is not really required in the embedded use case. Opt out of
installing the standard installation which will install only dmsetup.
This requires a backported fix for the lvm2 package to not install
unnecessary systemd services.
Fixes: #1448
* Remove CONFIG_CLOCKSOURCE_EFI configuration
It seems to cause messages like this on some machines:
EFI Event timer too slow freq = 100 Hz
The Barebox efi_defconfig configurationd doesn't enable it either.
Disable it by default as well.
* Enable CONFIG_CMD_ECHO_E to fix menutree
It seems that menutree needs CONFIG_CMD_ECHO_E to properly display the
boot menu.
Also enable other useful commands such as edit or reset.
* Bump Barebox to 2021.05.0
* Start ha-cli on tty1 instead of a getty
Instead of starting a getty start the ha-cli directly. This will show
the banner right on startup with the important information such as IP
address of the instance or the URL to reach it.
* Use default shell as root shell instead of HA CLI
Instead of using the ha-cli.sh script as login shell use the regular
shell. Amongst other things, this allows to run VS Code devcontainers
remotely via SSH or using scp. The HA CLI is still available using the
`ha` command.
* add eq3_char_loop package (eQ-3 char loopback kernel module)
* add generic_raw_uart package (low-latency raw UART kernel driver)
* add rpi-rf-mod package
* add device tree overlay support for RPI-RF-MOD/HM-MOD-RPI-PCB on Raspberry Pi
* enable GPIOLIB and GPIO_SYSFS required for RPI-RF-MOD/HM-MOD-RPI-PCB support.
* add basic RPI-RF-MOD/HM-MOD-RPI-PCB support for ASUS Tinker Board
* add device tree overlay support for ASUS Tinker Board and add
haos-config.txt loading support to U-Boot boot script
* Add udisks2 package
Add latest release of udisks2 as a package. Also disable polkit to avoid
excessive dependencies.
* Add udisks2 and os-agent to Home Assistant OS
* Bump OS Agent to latest version with udisks support
* Add RTL87xx/RTL88xx Bluetooth firmware
Enable Realtek Bluetooth dongles by adding firmware for RTL87xx and
RTL8xx devices.
* Enable Wireless firmwares for OVA and Generic x86-64 machines
Virtual machines might use hardware pass through functionality to get
direct access to wireless hardware. Add all firmwares we use in Generic
x86-64 image also to the OVA image. Also enable Ralink devices for the
two machines.
* Add RTL87xx/RTL88xx Bluetooth firmwares (#1273)
Add RTL87xx/RTL88xx Bluetooth to all devices without on-board Bluetooth.
* Rename Intel NUC machine to Generic x86-64
The Intel NUC machine has evolved and supports various x86-64 machines
today. Rename the board.
Note that this does not address the migration issue. This will be
handled separately.
* Update Scripts/Documentation
