* Improve ASUS Tinker Board support for 5.10
Remove patches which are unnecessary. Revert DMA for UART as it seems to
cause more problems (its also what Armbian is doing). With that
Bluetooth firmware seems to load without errors when loaded before the
bluetooth daemon is running!
Note: It seems that the board overheats quite quickly. With Armbian,
without load, that seems not to be a big deal, but HAOS does quite a
bunch at startup, leading the CPU to reach the 90°C trip point. Maybe it
was related to the rather closed shelf I have the ASUS Tinker board
running, but only after using a fan the board behaved for me.
* Use hardware flow control explicitly
The rtk_hciattach program uses hardware flow control by default (judging
from tty settings after starting the program). Just to be sure,
explicitly request 115200 and hardware flow control.
* Drop ODROID specific kernel update script
With the jump to Linux 5.10 LTS we can use the same upstream kernel for
Hardkernel ODROID boards as well. Extend the update-kernel-upstream.sh
to support the ODROID boards.
* Linux: Update kernel 5.10.13
* Remove rk3288-xt-q8l-v10.dts related patches
We only support ASUS Tinker Board, so no need for those patches.
* Remove unnecessary patches and rebase some for Tinker Board S
Some patches only apply to the Tinker Board device tree. Rebase them to
apply to the dtsi file so they apply for both boards, the Tinker Board
and the Tinker Board S board.
* Fix Tinker Board S (eMMC) boot (#650)
Use Tinker Board S U-Boot configuration which is capable to boot from
eMMC as well as from SD card.
Note that this makes U-Boot always claiming to run on Tinker Board S:
..
Model: Rockchip RK3288 Asus Tinker Board S
..
It seems that there is no generic Tinker Board configuration. However,
Tinker Board S configuration really seems to work well with Tinker Board
as well, so just use it.
Also today the U-Boot Makefile seems to generate a working idbloader.img
already. Drop our special handling.
* Use Tinker Board S device tree if booting from eMMC for Linux
Instead of patching the Tinker Board device tree, select the device tree
based on what device we are booting from.
Note: This boots the non-S device tree when booting a Tinker Board S
from SD card! But there is no reliable detection otherwise, so let's
just live with that fact.
* Document how to use our U-Boot to flash eMMC
