The Google Gasket driver has been removed from the main kernels staging
tree between 5.10 and 5.15 development window. Readd Google's
out-of-tree driver to continiue support Google Coral devices.
* Enable wext and nl80211 drivers for wpa_supplicant for all devices
* Enable r8188eu module globally and add related firmware to all devices config
Co-authored-by: Stefan Agner <stefan@agner.ch>
* Add tempio host package
tempio is a template helper using Go's template engine and sprig
functions.
* Use tempio to generate rauc manifest
* Use tempio to generate rauc system.conf
* Drop unnecessary device tree utilities
They have been used for Barebox which uses device tree to configure the
state storage and its location. With the change to GRUB the tools are no
longer required.
* Determine manual GRUB update depending on installed tools
Manually update the GRUB environment if no grub environment tools are
installed. This makes a upgrade work even after a previous downgrade (in
that case a grubenv file might still be present in the UEFI ESP).
* Linux: Update kernel 5.15.25
Use highest available kernel version in Buildroot 2021.08 (5.13)
* Update Hardkernel patches to Linux 5.15
* Update generic-x86-64/ova kernel config/patches for 5.15
* Drop Intel e1000e Sourceforge driver
The driver has been discontinued sometime last year. The main reason the
out-of-tree kernel has been enabled was for support for the i219-V
network chips which meanwhile are supported in mainline.
* Add systemd-journal-remote to the image
This allows to access journald's log from within Supervisor and expose
more system logs to users.
* Allow to access systemd-journal-gatewayd from Supervisor
Create a systemd-journal-gatewayd.socket service using a Unix socket and
bind mount it into the Supervisor container. This allows to query
systemd-journald from Supervisor directly.
* Bump buildroot
* buildroot 73991f0fee...5b5dff3136 (1):
> package/linux-firmware: Add RTL8152/8153/8156 firmware
* Enable Realtek 8152/8153/8156 USB Ethernet adapter support
Enable kernel driver and install firmware for Realtek USB Ethernet
adapter. While at it, also enable some other common USB Ethernet
adapters which don't require firmwares.
* Bump to Buildroot 2021.08.1
Move to Buildroot 2021.08.1 using the 2021.08.x-haos branch. Some
patches on the previous branch 2021.02.x-haos have been applied upstream
meanwhile. Others required rather trivial rebasing.
This latest Buildroot release brings new versions of the following
components:
- glibc 2.33
- systemd 249.3
- Networkmanager 1.32.2
- BlueZ 5.60
- Docker 20.10.8
The patch "Fix dhcp client" seems not to be necessary anymore. The
directory /var/lib/dhcp seems not in use when NetworkManager invokes
dhclient. It seems the leases which are typically stored in that
directory are managed inside NetworkManager.
* buildroot 2021.08.1..2021.08.x-haos (6)
> package/rpi-firmware: bump version to 1.20210805
> package/rpi-wifi-firmware: bump version to 883b726
> package/linux-firmware: add rtl8761b/rtl8761bu firmware
> package/docker-proxy: bump version to 64b7a4574d14
> package/rpi-firmware: Allow to deploy multiple firmware files
> network-manager: wpa_supplicant
* Bump Raspberry Pi Bluetooth helper scripts
With the update to Buildroot 2021.08.1, the bthelper fails with an error
org.bluez.Error.Busy when trying to power off the device. Presumably this
is a race condition which surfaced due to a change in Bluez 5.60:
348feb005a
Oct 11 14:32:21 homeassistant systemd[1]: Reached target Bluetooth Support.
...
Oct 11 14:32:21 homeassistant bluetoothd[412]: Bluetooth management interface 1.18 initialized
Oct 11 14:32:21 homeassistant systemd[1]: Started Raspberry Pi bluetooth helper.
Oct 11 14:32:21 homeassistant bthelper[417]: Raspberry Pi BDADDR already set
Oct 11 14:32:21 homeassistant bthelper[426]: [58B blob data]
Oct 11 14:32:21 homeassistant bthelper[426]: [59B blob data]
Oct 11 14:32:21 homeassistant bthelper[426]: Failed to set power off: org.bluez.Error.Busy
Oct 11 14:32:21 homeassistant systemd[1]: bthelper@hci0.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 14:32:21 homeassistant systemd[1]: bthelper@hci0.service: Failed with result 'exit-code'.
The latest version of the pi-bluetooth package introduced a sleep before
powering off the device, however, presumably for a different reason:
ae2efdeee8 (diff-609c8a23261988c47afd40be9b012feb1d167de8761c1301e44e1864635c19e3)
Anyways, this latest version seems to also fix the above mentioned race
condition.
The CRDA (Central Regulatory Domain Agent) utility has been used as a
user space helper to load regulatory information for WiFi drivers.
However, since Linux 4.15 the kernel can load the regulatory information
directly from a signed firmware file "regulatory.db".
The regulatory.db file is provided by the WIRELESS_REGDB package, which
has been already installed since its a dependency of CRDA.
Drop CRDA and select WIRELESS_REGDB package explicitly to make sure the
regulatory.db file is present.
LVM2 is not really required in the embedded use case. Opt out of
installing the standard installation which will install only dmsetup.
This requires a backported fix for the lvm2 package to not install
unnecessary systemd services.
Fixes: #1448
* Remove CONFIG_CLOCKSOURCE_EFI configuration
It seems to cause messages like this on some machines:
EFI Event timer too slow freq = 100 Hz
The Barebox efi_defconfig configurationd doesn't enable it either.
Disable it by default as well.
* Enable CONFIG_CMD_ECHO_E to fix menutree
It seems that menutree needs CONFIG_CMD_ECHO_E to properly display the
boot menu.
Also enable other useful commands such as edit or reset.
* Bump Barebox to 2021.05.0
* Start ha-cli on tty1 instead of a getty
Instead of starting a getty start the ha-cli directly. This will show
the banner right on startup with the important information such as IP
address of the instance or the URL to reach it.
* Use default shell as root shell instead of HA CLI
Instead of using the ha-cli.sh script as login shell use the regular
shell. Amongst other things, this allows to run VS Code devcontainers
remotely via SSH or using scp. The HA CLI is still available using the
`ha` command.
* add eq3_char_loop package (eQ-3 char loopback kernel module)
* add generic_raw_uart package (low-latency raw UART kernel driver)
* add rpi-rf-mod package
* add device tree overlay support for RPI-RF-MOD/HM-MOD-RPI-PCB on Raspberry Pi
* enable GPIOLIB and GPIO_SYSFS required for RPI-RF-MOD/HM-MOD-RPI-PCB support.
* add basic RPI-RF-MOD/HM-MOD-RPI-PCB support for ASUS Tinker Board
* add device tree overlay support for ASUS Tinker Board and add
haos-config.txt loading support to U-Boot boot script
* Add udisks2 package
Add latest release of udisks2 as a package. Also disable polkit to avoid
excessive dependencies.
* Add udisks2 and os-agent to Home Assistant OS
* Bump OS Agent to latest version with udisks support
* Add RTL87xx/RTL88xx Bluetooth firmware
Enable Realtek Bluetooth dongles by adding firmware for RTL87xx and
RTL8xx devices.
* Enable Wireless firmwares for OVA and Generic x86-64 machines
Virtual machines might use hardware pass through functionality to get
direct access to wireless hardware. Add all firmwares we use in Generic
x86-64 image also to the OVA image. Also enable Ralink devices for the
two machines.
* Add RTL87xx/RTL88xx Bluetooth firmwares (#1273)
Add RTL87xx/RTL88xx Bluetooth to all devices without on-board Bluetooth.
* Rename Intel NUC machine to Generic x86-64
The Intel NUC machine has evolved and supports various x86-64 machines
today. Rename the board.
Note that this does not address the migration issue. This will be
handled separately.
* Update Scripts/Documentation
