* Update buildroot-patches for 2020.11-rc1 buildroot
* Update buildroot to 2020.11-rc1
Signed-off-by: Stefan Agner <stefan@agner.ch>
* Don't rely on sfdisk --list-free output
The --list-free (-F) argument does not allow machine readable mode. And
it seems that the output format changes over time (different spacing,
using size postfixes instead of raw blocks).
Use sfdisk json output and calculate free partition space ourselfs. This
works for 2.35 and 2.36 and is more robust since we rely on output which
is meant for scripts to parse.
* Migrate defconfigs for Buildroot 2020.11-rc1
In particular, rename BR2_TARGET_UBOOT_BOOT_SCRIPT(_SOURCE) to
BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT(_SOURCE).
* Rebase/remove systemd patches for systemd 246
* Drop apparmor/libapparmor from buildroot-external
* hassos-persists: use /run as directory for lockfiles
The U-Boot tools use /var/lock by default which is not created any more
by systemd by default (it is under tmpfiles legacy.conf, which we no
longer install).
* Disable systemd-update-done.service
The service is not suited for pure read-only systems. In particular the
service needs to be able to write a file in /etc and /var. Remove the
service. Note: This is a static service and cannot be removed using
systemd-preset.
* Disable apparmor.service for now
The service loads all default profiles. Some might actually cause
problems. E.g. the profile for ping seems not to match our setup for
/etc/resolv.conf:
[85503.634653] audit: type=1400 audit(1605286002.684:236): apparmor="DENIED" operation="open" profile="ping" name="/run/resolv.conf" pid=27585 comm="ping" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
Drop AVAHI and use systemd-resolved to announce hostname via mDNS
and LLMNR. Also continue to offer the _workstation._tcp.local service
since it is used by the CoreDNS mDNS plug-in.
* Bump Raspberry Pi kernel to 5.4
Bump kernel to the downstream Raspberry Pi 5.4 kernel. Drop patches
already merged upstream and use rebased patches for USB reset
controller (required for U-Boot 2020.10 for USB SSD boot).
* Add compatible node for upstream U-Boot
Add brcm,bcm2835-pl011 to make upstream U-Boot bind with the
bcm283x_pl011 driver. This allows to boot with the device tree provided
by the Raspberry Pi Linux kernel 5.4 even without enable_uart=1.
After running HAOS on my ODROID N2+ several hours I see freezes and
sometimes stack traces which point to a problem in CPU frequency
scaling. This crash seems not to appear on Hardkernel's 18.04 Ubuntu
stable release. However, Hardkernel's Ubuntu uses the performance
governor. Use the performance governor as well to avoid crashes on N2+.
In case a container image is corrupted `docker inspect` might fail:
# docker inspect --format='{{.Id}}' "${SUPERVISOR_IMAGE}"
Error response from daemon: readlink /mnt/data/docker/overlay2: invalid argument
In that same state the `docker images` command still shows the images.
Since `docker inspect` returns an error SUPERVISOR_IMAGE_ID will be empty
and a simple `docker pull` will be attempted. That does not suffice to
recover from a corrupted container image.
Use `docker images` to get the image ids and make sure to delete all
image ids found by that command.
Also don't use RuntimeDirectory since it deletes the runtime directory
between the service start attempts which defeats the purpose.
This reverts commit c92b4b54be.
Pure GPT would be nice, but older EEPROM/firmware version seem not to
handle it properly (before EEPROM 2020-09-03/firmware 2020-10-22). Since
devices still get shipped with older EEPROM we currently moving to pure
GPT would make those devices not booting.
Stick with hybrid mode for now to make sure HAOS boots on all devices no
matter if a new or old EEPROM is in use.
* Simplify self healing capabilities of Supervisor service
Instead of relying on time based information on how long the container
has been running use a startup marker file to infer if the last startup
has been successful.
* Update buildroot-external/rootfs-overlay/usr/sbin/hassos-supervisor
Co-authored-by: Pascal Vizeli <pascal.vizeli@syshack.ch>
Co-authored-by: Pascal Vizeli <pascal.vizeli@syshack.ch>
The landingpage container is a minimal webserver with built-in zeroconf
annoucement. Preinstall the machine specific landingpage container to
make sure it will show up right after startup.
* automatically fsck to repair partitions
* add fsck.fat so rpi boot partition can be repaired
* Use Wants= instead of Requires=
Co-authored-by: Pascal Vizeli <pascal.vizeli@syshack.ch>
* add dosfstools to all images
* run hassos-data and hassos-expand after fsck
Co-authored-by: Pascal Vizeli <pascal.vizeli@syshack.ch>
* Make sure to set board_rev for N2+ correctly
For some reason the code to set the environment did not make it into the
ODROID N2 board code. Fix the patch to correctly set board_rev for N2(+).
Also remove the w400 patch as it is no longer required.
* Use latest ODROID-N2+ patches
Use the queued patches (and fixes) for upstream ODROID-N2+ support.
This uses the clock settings from meson-g12b-a311d.dtsi running the
CPUs at the following clocks:
- 4xA73@2.2GHz
- 2xA53@1.8GHz
Instead of reverting the CDC ACM cool-down patch fix the intention of
that change. This should fix the error recovery paths in the CDC ACM
driver and allow CDC ACM devices to continue working even in the event
of USB issues.
Revert CDC ACM cool-down patch. This should fix the error recovery paths
in the CDC ACM driver and allow CDC ACM devices to continue working even
in the event of USB issues.
* Bump ODROID boards to Linux 5.9.1
This makes quite some patches obsolete which since have been upstreamed.
* Drop Linux 5.7 header symbols
Since we do not introduce new packages which actually require a newer
kernel headers, there is no value in having config symbols for the new
kernel version. Buildroot is still using the headers from our kernel,
and hence gets the latest version of the headers.
The Docker socket path is /run/docker.sock. Also only one path can be
used per property. This fixes the supervisor service, which currently
refuses to start due to missing Docker socket.
The patch causes U-Boot freezes in some configurations. The root cause
is that U-Boot does not allow to use the bss section in pre-relocation
code (which is where the UART is used). Drop the patch as it is not
required currently.
See also:
http://u-boot.10912.n7.nabble.com/RPi4-U-Boot-freeze-td424432.html#a427198
The to symlink serial0/1 currently might apply to the first or second
ttyAMAX instance. In downstream, a patch makes sure that the first
PL011 is always ttyAMA0. However, upstream the numbering depends on the
UART alias, which leads to the first PL011 being ttyAMA1.
Check the actual iobase too to make sure we are dealing with the first
PL011 instance.
See also:
05cfe136f7 (diff-2678c183f503319c8d8c09c818af789a)
The new readline utilty used by the CLI add-on requires the size of the
terminal to be set. Use the resize command to initialize terminal size
on login if we are running on a serial terminal.
The U-Boot build system creates a ready to use idbloader.img. A earlier
commit dropped the HAOS code to create the same. However, the commit
missed copying the one built by U-Boot. Make sure idbloader.img gets
copied to the image output directory.
Currently the Microsoft Reserved Partition GUID is used for this FAT32
formatted partition. This GUID is a rather Microsoft Windows specific
GUID and not commonly used on Linux.
On Linux systems partitions of this type do not get automatically
mounted (see /usr/lib/udev/rules.d/80-udisks2.rules). However, since
this partition contains some files user commonly need to adjust
(config.txt, cmdline.txt) it would be good if the partition does get
mounted.
Use Microsoft Basic Data instead, which is used by default for FAT32
partition (even by Linux partitioning tools such as gparted). Tested
on ASUS Tinker Board and RPi4.
The hassos-expand script calls sfdisk to find free disk space. It seems
that today it considers the space before the first partition as free:
$ sudo sfdisk -Fq /dev/sdi
Start End Sectors Size
2048 16383 14336 7M
This causes the script to always resize. It seems not to cause harm to
the partition table (it does not resize really). However, the call to
partx seems to confuse systemd and kill the mnt-data.mount process
(presumably because udev causes remove/add events for the by-label
device units).
Consider everything below 8MiB to not be worthy of a size change. This
avoids missdetection and resize attempts where there is no need.
