* Recreate defconfigs using savedefconfig target
Buildroot allows to generate minimal defconfigs using the savedefconfig
target. Regenerate all our configurations so they all look alive and are
minimalistc.
* Fix generic_aarch64_defconfig
The Google Gasket driver has been removed from the main kernels staging
tree between 5.10 and 5.15 development window. Readd Google's
out-of-tree driver to continiue support Google Coral devices.
* Replace bluetooth-bcm43xx with pi-bluetooth Buildroot package
The new pi-bluetooth packages the scripts and systemd service from
the Raspberry distribution package directly:
https://github.com/RPi-Distro/pi-bluetooth
* Update to latest pi-bluetooth service files
* Update busybox configuration to 1.35.0
The new/deleted configurations are generated automatically, no actual
change in this patch.
* Enable busybox xxd command
The xxd tool is useful for conversion in scripts.
* Prevent start erros on Compute Module 4 without WiFi/Bluetooth
* Enable wext and nl80211 drivers for wpa_supplicant for all devices
* Enable r8188eu module globally and add related firmware to all devices config
Co-authored-by: Stefan Agner <stefan@agner.ch>
* Add tempio host package
tempio is a template helper using Go's template engine and sprig
functions.
* Use tempio to generate rauc manifest
* Use tempio to generate rauc system.conf
* Drop unnecessary device tree utilities
They have been used for Barebox which uses device tree to configure the
state storage and its location. With the change to GRUB the tools are no
longer required.
* Determine manual GRUB update depending on installed tools
Manually update the GRUB environment if no grub environment tools are
installed. This makes a upgrade work even after a previous downgrade (in
that case a grubenv file might still be present in the UEFI ESP).
* Add generic-aarch64 to the list of Kernels
* Bump buildroot
* buildroot 8bbb32c16a...962ff8c0d4 (1):
> package/rtl8812au-aircrack-ng: bump version to 3a6402e
* Fix kernel version for Raspberry Pi kernel based boards
* Linux: Update kernel 5.15.25
Use highest available kernel version in Buildroot 2021.08 (5.13)
* Update Hardkernel patches to Linux 5.15
* Update generic-x86-64/ova kernel config/patches for 5.15
* Drop Intel e1000e Sourceforge driver
The driver has been discontinued sometime last year. The main reason the
out-of-tree kernel has been enabled was for support for the i219-V
network chips which meanwhile are supported in mainline.
* Add AArch64/ARM64 EFI boot support (for QEMU and some boards)
* Allow GRUB to load cmdline.txt-like
* Enable qcow2/vmdk disk images
Co-authored-by: Stefan Agner <stefan@agner.ch>
* Fix enable USB host mode kernel patch
Update to a new patch which applies the device tree change such that the
USB controller actually gets enabled.
* Update Home Assistant Yellow board config
Update config to match changes which have been made to other baords as
well.
* Rename Home Assistant Amber to Yellow
Rename the board from "amber" to "yellow" as Home Assistant Yellow is
the official name now.
* Add Home Assistant Yellow to the build matrix
* Bump buildroot
* buildroot 907739ed48...4c6c8fb767 (1):
> package/rpi-firmware: bump version to 71bd3109
* RaspberryPi: Update kernel 5.10.63 - oldstable_20211201
* Add Raspberry Pi Zero 2 W device tree
Use rtl8812au driver provided by buildroot. This uses a newer verison of
the v5.6.4.2 branch which works with newer kernel and seems to be the
recommended branch.
Note: It seems that our buildroot package currently fails to properly
deploy the 88XXau.ko kernel module. Instead of fixing our version, just
move to the buildroot version.
These boards support the rather ancient ARMv6 architecture only. We
officially stopped supporting them already two releases ago, its time to
say goodbye.
* Add systemd-journal-remote to the image
This allows to access journald's log from within Supervisor and expose
more system logs to users.
* Allow to access systemd-journal-gatewayd from Supervisor
Create a systemd-journal-gatewayd.socket service using a Unix socket and
bind mount it into the Supervisor container. This allows to query
systemd-journald from Supervisor directly.
* Bump buildroot
* buildroot 73991f0fee...5b5dff3136 (1):
> package/linux-firmware: Add RTL8152/8153/8156 firmware
* Enable Realtek 8152/8153/8156 USB Ethernet adapter support
Enable kernel driver and install firmware for Realtek USB Ethernet
adapter. While at it, also enable some other common USB Ethernet
adapters which don't require firmwares.
* Add Amber machine
Introduce a new machine for Amber. Store it under Raspberry Pi boards
since Amber is based on the Raspberry Pi Compute Module 4. This way we
can reuse existing scripts.
* Add kernel patches for Amber
Add kernel patches which add a custom device tree for Amber.
* Add device wipe support via GPIO button
Allow to wipe the device by pressing and holding the red button.
* Enable serial console by default
Enable serial console on the on-board USB-to-UART adapter as well as on
the GPIO header.
* Use 64-bit mode by default
Support only 64-bit for Amber, it is mature enough.
* Bump to Buildroot 2021.08.1
Move to Buildroot 2021.08.1 using the 2021.08.x-haos branch. Some
patches on the previous branch 2021.02.x-haos have been applied upstream
meanwhile. Others required rather trivial rebasing.
This latest Buildroot release brings new versions of the following
components:
- glibc 2.33
- systemd 249.3
- Networkmanager 1.32.2
- BlueZ 5.60
- Docker 20.10.8
The patch "Fix dhcp client" seems not to be necessary anymore. The
directory /var/lib/dhcp seems not in use when NetworkManager invokes
dhclient. It seems the leases which are typically stored in that
directory are managed inside NetworkManager.
* buildroot 2021.08.1..2021.08.x-haos (6)
> package/rpi-firmware: bump version to 1.20210805
> package/rpi-wifi-firmware: bump version to 883b726
> package/linux-firmware: add rtl8761b/rtl8761bu firmware
> package/docker-proxy: bump version to 64b7a4574d14
> package/rpi-firmware: Allow to deploy multiple firmware files
> network-manager: wpa_supplicant
* Bump Raspberry Pi Bluetooth helper scripts
With the update to Buildroot 2021.08.1, the bthelper fails with an error
org.bluez.Error.Busy when trying to power off the device. Presumably this
is a race condition which surfaced due to a change in Bluez 5.60:
348feb005a
Oct 11 14:32:21 homeassistant systemd[1]: Reached target Bluetooth Support.
...
Oct 11 14:32:21 homeassistant bluetoothd[412]: Bluetooth management interface 1.18 initialized
Oct 11 14:32:21 homeassistant systemd[1]: Started Raspberry Pi bluetooth helper.
Oct 11 14:32:21 homeassistant bthelper[417]: Raspberry Pi BDADDR already set
Oct 11 14:32:21 homeassistant bthelper[426]: [58B blob data]
Oct 11 14:32:21 homeassistant bthelper[426]: [59B blob data]
Oct 11 14:32:21 homeassistant bthelper[426]: Failed to set power off: org.bluez.Error.Busy
Oct 11 14:32:21 homeassistant systemd[1]: bthelper@hci0.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 14:32:21 homeassistant systemd[1]: bthelper@hci0.service: Failed with result 'exit-code'.
The latest version of the pi-bluetooth package introduced a sleep before
powering off the device, however, presumably for a different reason:
ae2efdeee8 (diff-609c8a23261988c47afd40be9b012feb1d167de8761c1301e44e1864635c19e3)
Anyways, this latest version seems to also fix the above mentioned race
condition.
