The CRDA (Central Regulatory Domain Agent) utility has been used as a
user space helper to load regulatory information for WiFi drivers.
However, since Linux 4.15 the kernel can load the regulatory information
directly from a signed firmware file "regulatory.db".
The regulatory.db file is provided by the WIRELESS_REGDB package, which
has been already installed since its a dependency of CRDA.
Drop CRDA and select WIRELESS_REGDB package explicitly to make sure the
regulatory.db file is present.
LVM2 is not really required in the embedded use case. Opt out of
installing the standard installation which will install only dmsetup.
This requires a backported fix for the lvm2 package to not install
unnecessary systemd services.
Fixes: #1448
* Start ha-cli on tty1 instead of a getty
Instead of starting a getty start the ha-cli directly. This will show
the banner right on startup with the important information such as IP
address of the instance or the URL to reach it.
* Use default shell as root shell instead of HA CLI
Instead of using the ha-cli.sh script as login shell use the regular
shell. Amongst other things, this allows to run VS Code devcontainers
remotely via SSH or using scp. The HA CLI is still available using the
`ha` command.
* add eq3_char_loop package (eQ-3 char loopback kernel module)
* add generic_raw_uart package (low-latency raw UART kernel driver)
* add rpi-rf-mod package
* add device tree overlay support for RPI-RF-MOD/HM-MOD-RPI-PCB on Raspberry Pi
* enable GPIOLIB and GPIO_SYSFS required for RPI-RF-MOD/HM-MOD-RPI-PCB support.
* add basic RPI-RF-MOD/HM-MOD-RPI-PCB support for ASUS Tinker Board
* add device tree overlay support for ASUS Tinker Board and add
haos-config.txt loading support to U-Boot boot script
* Re-add patches missed with U-Boot 2021.04-rc4 upgrade
Also add patches for Raspberry Pi again.
* Regenerate patches for U-Boot 2021.04
* Update to U-Boot 2021.04
* Add udisks2 package
Add latest release of udisks2 as a package. Also disable polkit to avoid
excessive dependencies.
* Add udisks2 and os-agent to Home Assistant OS
* Bump OS Agent to latest version with udisks support
Bump to the latest U-Boot release 2021.04-rc4. This alows to drop quite
some patches which have been sent to the mailing list or picked from the
mailing list and have been merged upstream now.
* Rebase patches to Buildroot 2021.02-rc3
* Update Buildroot to 2021.02-rc3
* Declare Kernel headers to be Linux version 5.10 (since they are, and new Buildroot knows about 5.10)
Move to the new Linux 5.10 based kernel for all Raspberry Pi boards.
This uses the version of the last OS version used in Raspberry Pi OS
raspberrypi-kernel_1.20210201-1.
* Use systemd-growfs instead of resize2fs (#1106)
Since systemd 236 systemd has a built-in file system growing mechanism.
The mechanism relies on the kernels online file system resize
capabilities instead of the external resize2fs utility. Online resizing
is supposedly much faster since the kernel takes care of things.
This also makes sure that external file systems get resized which
previously have not been taken care of.
* Drop HA OS specific file system resizing
Since we have systemd-growfs in place now we can drop our file system
resizing code.
* Make sure /dev/disk/by-label/hassos-data is present after resizing
Note: systemd will retry mnt-data.mount later, so at least in theory
this shouldn't really matter. However, the journal has a lot of churn
due to that reordering.
* Rewrite datactl command
Prepare the target partition as part of the datactl command. Rely on
partlabel for the target disk since we are always using GPT on the
target disk. Use systemd and partlabel mechanism to wait and find
the target data disk. Keep using the file system label to identify
the source disk.
Also use e2image instead of raw dd to move data. This should
speed up the processes significantly.
* Fix corner case when reusing same disk again
* Update buildroot-patches for 2020.11-rc1 buildroot
* Update buildroot to 2020.11-rc1
Signed-off-by: Stefan Agner <stefan@agner.ch>
* Don't rely on sfdisk --list-free output
The --list-free (-F) argument does not allow machine readable mode. And
it seems that the output format changes over time (different spacing,
using size postfixes instead of raw blocks).
Use sfdisk json output and calculate free partition space ourselfs. This
works for 2.35 and 2.36 and is more robust since we rely on output which
is meant for scripts to parse.
* Migrate defconfigs for Buildroot 2020.11-rc1
In particular, rename BR2_TARGET_UBOOT_BOOT_SCRIPT(_SOURCE) to
BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT(_SOURCE).
* Rebase/remove systemd patches for systemd 246
* Drop apparmor/libapparmor from buildroot-external
* hassos-persists: use /run as directory for lockfiles
The U-Boot tools use /var/lock by default which is not created any more
by systemd by default (it is under tmpfiles legacy.conf, which we no
longer install).
* Disable systemd-update-done.service
The service is not suited for pure read-only systems. In particular the
service needs to be able to write a file in /etc and /var. Remove the
service. Note: This is a static service and cannot be removed using
systemd-preset.
* Disable apparmor.service for now
The service loads all default profiles. Some might actually cause
problems. E.g. the profile for ping seems not to match our setup for
/etc/resolv.conf:
[85503.634653] audit: type=1400 audit(1605286002.684:236): apparmor="DENIED" operation="open" profile="ping" name="/run/resolv.conf" pid=27585 comm="ping" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
Drop AVAHI and use systemd-resolved to announce hostname via mDNS
and LLMNR. Also continue to offer the _workstation._tcp.local service
since it is used by the CoreDNS mDNS plug-in.
* Bump Raspberry Pi kernel to 5.4
Bump kernel to the downstream Raspberry Pi 5.4 kernel. Drop patches
already merged upstream and use rebased patches for USB reset
controller (required for U-Boot 2020.10 for USB SSD boot).
* Add compatible node for upstream U-Boot
Add brcm,bcm2835-pl011 to make upstream U-Boot bind with the
bcm283x_pl011 driver. This allows to boot with the device tree provided
by the Raspberry Pi Linux kernel 5.4 even without enable_uart=1.
The landingpage container is a minimal webserver with built-in zeroconf
annoucement. Preinstall the machine specific landingpage container to
make sure it will show up right after startup.
* automatically fsck to repair partitions
* add fsck.fat so rpi boot partition can be repaired
* Use Wants= instead of Requires=
Co-authored-by: Pascal Vizeli <pascal.vizeli@syshack.ch>
* add dosfstools to all images
* run hassos-data and hassos-expand after fsck
Co-authored-by: Pascal Vizeli <pascal.vizeli@syshack.ch>
