* Implement manual boot switch when downgrading to Barebox
When installing OS 7 or older from a OS 8 installation, the bootloader
is changed back to Barebox. However, in this case Barebox does not know
which boot slot is correct (and rauc won't update Barebox' state as it
is configured to work with GRUB in OS 8+).
This implements a poor mans version to switch the boot partition. It
clears Barebox state and deploys one of the two pre-configured default
states, booting either boot slot A or B.
* Check if Busybox supports oflag
It seems that Busybox' dd shipped with OS release 5 and earlier does not
support oflag. Check if the flag is supported before making use of it.
* Exit if a command in the update scripts returns an error
This makes sure that the update isn't marked as successful in case there
is an error in the update script.
* ODROID XU4: Update U-Boot on eMMC boot partition
Update the U-Boot on the eMMC boot partition if present. Only write the
first megabyte as the eMMC boot partition might be smaller than the SPL
image and only the first megabyte is occupied by FW/BL1/BL2/TZSW (see
https://wiki.odroid.com/odroid-xu4/software/partition_table#tab__odroid-xu341).
The rauc hook for the spl slotclass writes to the disk directly. Make
sure the changes do not end up in cache in case the device looses power
or is otherwise not properly rebooted.
Also use the same partition label detection we are using in
hassos-expand.
* Fix issue with latest shellcheck version
The latest shellcheck versions use a new error number for non-POSIX
string replacement. Change to ignore this new error number.
* Ignore shellcheck issue about not following sourced files
Newer shellcheck versions also warn when shellcheck does not follow
sourcing of files with known path:
Not following: ./meta was not specified as input (see shellcheck -x).
We check those files separately so ignore this error for the two scripts
affected.
* Accept installation with intel-nuc in compatible string
For the OS release 6 intel-nuc gets renamed to generic-x86-64. Since
the machine name is in the OS compatible string we need to make sure
OS release 5 installation can update to release 6 despite the new
machine name.
* Change HASSOS_ID from hassos to haos
Use a rauc install-check hook to make this update compatible with OS
releases using hassos in the compatible string.
* Use home-assistant as organization in CPE_NAME
Align with Home Assistant core which uses home-assistant with a dash as
organization in CPE_NAME.
