Odroid-XU4: Initial commit (#303)

buildroot-external/board/hardkernel/odroid-xu4/boot-env.txt

@@ -0,0 +1,41 @@
+
+macaddr=00:1e:06:61:7a:39
+vout=hdmi
+vout=hdmi
+# - DVI Mode (disables sound over HDMI as per DVI compat)
+# vout=dvi
+
+# --- HDMI CEC Configuration ---
+# ------------------------------------------
+cecenable=false
+# set to true to enable HDMI CEC
+
+# Enable/Disable ODROID-VU7 Touchsreen
+disable_vu7=false
+
+# DRAM Frequency
+# Sets the LPDDR3 memory frequency
+# Supported values: 933 825 728 633 (MHZ)
+ddr_freq 825
+
+# External watchdog board enable
+external_watchdog=false
+# debounce time set to 3 ~ 10 sec, default 3 sec
+external_watchdog_debounce=3
+
+
+#------------------------------------------------------------------------------
+#
+# HDMI Hot Plug detection
+#
+#------------------------------------------------------------------------------
+#
+# Forces the HDMI subsystem to ignore the check if the cable is connected or
+# not.
+# false : disable the detection and force it as connected.
+# true : let cable, board and monitor decide the connection status.
+#
+# default: true
+#
+#------------------------------------------------------------------------------
+HPD=true

buildroot-external/board/hardkernel/odroid-xu4/hassos-hook.sh

@@ -0,0 +1,31 @@
+#!/bin/bash
+# shellcheck disable=SC2155
+
+function hassos_pre_image() {
+    local BOOT_DATA="$(path_boot_dir)"
+    local BL1="${BINARIES_DIR}/bl1.bin.hardkernel"
+    local BL2="${BINARIES_DIR}/bl2.bin.hardkernel.720k_uboot"
+    local BLTZ="${BINARIES_DIR}/tzsw.bin.hardkernel"
+    local UBOOT="${BINARIES_DIR}/u-boot.bin"
+    local spl_img="$(path_spl_img)"
+
+    cp "${BINARIES_DIR}/boot.scr" "${BOOT_DATA}/boot.scr"
+    cp "${BOARD_DIR}/boot-env.txt" "${BOOT_DATA}/config.txt"
+    cp "${BINARIES_DIR}/exynos5422-odroidxu4.dtb" "${BOOT_DATA}/exynos5422-odroidxu4.dtb"
+
+    echo "console=tty1 console=ttySAC2,115200" > "${BOOT_DATA}/cmdline.txt"
+
+    # SPL
+    create_spl_image
+
+    dd if="${BL1}" of="${spl_img}" conv=notrunc bs=512 seek=1
+    dd if="${BL2}" of="${spl_img}" conv=notrunc bs=512 seek=31
+    dd if="${UBOOT}" of="${spl_img}" conv=notrunc bs=512 seek=63
+    dd if="${BLTZ}" of="${spl_img}" conv=notrunc bs=512 seek=1503
+    dd if=/dev/zero of="${spl_img}" conv=notrunc bs=512 count=32 seek=2015
+}
+
+
+function hassos_post_image() {
+    convert_disk_image_gz
+}

buildroot-external/board/hardkernel/odroid-xu4/meta

@@ -0,0 +1,7 @@
+BOARD_ID=odroid-xu4
+BOARD_NAME="Hardkernel Odroid-XU4"
+CHASSIS=embedded
+BOOTLOADER=uboot
+KERNEL_FILE=zImage
+BOOT_SYS=mbr
+BOOT_ENV_SIZE=0x2000

buildroot-external/board/hardkernel/odroid-xu4/uboot-boot.ush

@@ -0,0 +1,98 @@
+
+###########################################
+
+part start mmc ${devnum} 9 mmc_env
+mmc dev ${devnum}
+setenv loadbootstate " \
+    echo 'loading env...'; \
+    mmc read ${ramdisk_addr_r} ${mmc_env} 0x10; \
+    env import -c ${ramdisk_addr_r} 0x2000;"
+
+setenv storebootstate " \
+    echo 'storing env...'; \
+    env export -c -s 0x2000 ${ramdisk_addr_r} BOOT_ORDER BOOT_A_LEFT BOOT_B_LEFT; \
+    mmc write ${ramdisk_addr_r} ${mmc_env} 0x10;"
+
+run loadbootstate
+test -n "${BOOT_ORDER}" || setenv BOOT_ORDER "A B"
+test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3
+test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3
+
+if load mmc ${devnum}:1 ${ramdisk_addr_r} config.txt; then
+  env import -t ${ramdisk_addr_r} ${filesize};
+fi
+
+# Board bootargs
+setenv hdmi_phy_control "HPD=${HPD} vout=${vout}"
+if test "${cecenable}" = "false"; then fdt rm /cec@101B0000; fi
+if test "${disable_vu7}" = "false"; then setenv hid_quirks "usbhid.quirks=0x0eef:0x0005:0x0004"; fi
+if test "${external_watchdog}" = "true"; then setenv external_watchdog "external_watchdog=${external_watchdog} external_watchdog_debounce=${external_watchdog_debounce}"; fi
+
+setenv bootargs_odroidxu4 "${videoconfig} ${hdmi_phy_control} ${hid_quirks} smsc95xx.macaddr=${macaddr} ${external_watchdog}"
+
+# HassOS bootargs
+setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor cgroup_enable=memory"
+
+# HassOS system A/B
+setenv bootargs_a "root=PARTUUID=48617373-06 rootfstype=squashfs ro rootwait"
+setenv bootargs_b "root=PARTUUID=48617373-08 rootfstype=squashfs ro rootwait"
+
+#usb start
+
+# Load extraargs
+fileenv mmc ${devnum}:1 ${ramdisk_addr_r} cmdline.txt cmdline
+fatload mmc ${devnum}:1 ${fdt_addr_r} exynos5422-odroidxu4.dtb
+fdt addr ${fdt_addr_r}
+
+
+# logical volumes get numbered after physical ones.
+# 1. boot
+# 2. Extended partition
+# 3. Overlay
+# 4. Data
+# 5. KernelA
+# 6. SystemA
+# 7. KernelB
+# 8. SystemB
+# 9. BootInfo
+setenv bootargs
+for BOOT_SLOT in "${BOOT_ORDER}"; do
+  if test "x${bootargs}" != "x"; then
+    # skip remaining slots
+  elif test "x${BOOT_SLOT}" = "xA"; then
+    if test ${BOOT_A_LEFT} -gt 0; then
+      setexpr BOOT_A_LEFT ${BOOT_A_LEFT} - 1
+      echo "Found valid slot A, ${BOOT_A_LEFT} attempts remaining"
+      setenv load_kernel "ext4load mmc ${devnum}:5 ${kernel_addr_r} zImage"
+      setenv bootargs "${bootargs_hassos} ${bootargs_odroidxu4} ${bootargs_a} rauc.slot=A ${cmdline}"
+    fi
+  elif test "x${BOOT_SLOT}" = "xB"; then
+    if test ${BOOT_B_LEFT} -gt 0; then
+      setexpr BOOT_B_LEFT ${BOOT_B_LEFT} - 1
+      echo "Found valid slot B, ${BOOT_B_LEFT} attempts remaining"
+      setenv load_kernel "ext4load mmc ${devnum}:7 ${kernel_addr_r} zImage"
+      setenv bootargs "${bootargs_hassos} ${bootargs_odroidxu4} ${bootargs_b} rauc.slot=B ${cmdline}"
+    fi
+  fi
+done
+
+if test -n "${bootargs}"; then
+  run storebootstate
+else
+  echo "No valid slot found, resetting tries to 3"
+  setenv BOOT_A_LEFT 3
+  setenv BOOT_B_LEFT 3
+  run storebootstate
+  reset
+fi
+
+echo "Loading kernel"
+run load_kernel
+echo " Starting kernel"
+printenv load_kernel
+printenv bootargs
+dmc ${ddr_freq}
+bootz ${kernel_addr_r} - ${fdt_addr_r}
+
+echo "Fails on boot"
+reset

buildroot-external/board/hardkernel/odroid-xu4/uboot.config

@@ -0,0 +1,6 @@
+# CONFIG_USB_STORAGE is not set
+CONFIG_DOS_PARTITION=y
+# CONFIG_EFI_PARTITION is not set
+CONFIG_CMD_FILEENV=y
+CONFIG_ENV_IS_NOWHERE=Y
+CONFIG_DISPLAY_BOARDINFO=y