Remove orangepi (#531)

buildroot-external/board/orangepi/hassos-hook.sh

@@ -1,25 +0,0 @@
-#!/bin/bash
-# shellcheck disable=SC2155
-
-function hassos_pre_image() {
-    local BOOT_DATA="$(path_boot_dir)"
-    local SPL="${BINARIES_DIR}/sunxi-spl.bin"
-    local UBOOT="${BINARIES_DIR}/u-boot.itb"
-    local spl_img="$(path_spl_img)"
-
-    cp "${BINARIES_DIR}/boot.scr" "${BOOT_DATA}/boot.scr"
-    cp "${BINARIES_DIR}/sun50i-h5-orangepi-prime.dtb" "${BOOT_DATA}/sun50i-h5-orangepi-prime.dtb"
-    cp "${BOARD_DIR}/config.txt" "${BOOT_DATA}/config.txt"
-    touch "${BOOT_DATA}/cmdline.txt"
-
-    # SPL
-    create_spl_image
-
-    dd if="${SPL}" of="${spl_img}" conv=notrunc bs=512 seek=16
-    dd if="${UBOOT}" of="${spl_img}" conv=notrunc bs=512 seek=80
-}
-
-
-function hassos_post_image() {
-    convert_disk_image_gz
-}

buildroot-external/board/orangepi/kernel.config

@@ -1,32 +0,0 @@
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_ARCH_ACTIONS is not set
-# CONFIG_ARCH_ALPINE is not set
-# CONFIG_ARCH_BCM2835 is not set
-# CONFIG_ARCH_BCM_IPROC is not set
-# CONFIG_ARCH_BERLIN is not set
-# CONFIG_ARCH_BRCMSTB is not set
-# CONFIG_ARCH_EXYNOS is not set
-# CONFIG_ARCH_K3 is not set
-# CONFIG_ARCH_LAYERSCAPE is not set
-# CONFIG_ARCH_LG1K is not set
-# CONFIG_ARCH_HISI is not set
-# CONFIG_ARCH_MEDIATEK is not set
-# CONFIG_ARCH_MESON is not set
-# CONFIG_ARCH_MVEBU is not set
-# CONFIG_ARCH_QCOM is not set
-# CONFIG_ARCH_REALTEK is not set
-# CONFIG_ARCH_ROCKCHIP is not set
-# CONFIG_ARCH_SEATTLE is not set
-# CONFIG_ARCH_SYNQUACER is not set
-# CONFIG_ARCH_RENESAS is not set
-# CONFIG_ARCH_STRATIX10 is not set
-# CONFIG_ARCH_TEGRA is not set
-# CONFIG_ARCH_SPRD is not set
-# CONFIG_ARCH_THUNDER is not set
-# CONFIG_ARCH_THUNDER2 is not set
-# CONFIG_ARCH_UNIPHIER is not set
-# CONFIG_ARCH_VEXPRESS is not set
-# CONFIG_ARCH_XGENE is not set
-# CONFIG_ARCH_ZX is not set
-# CONFIG_ARCH_ZYNQMP is not set

buildroot-external/board/orangepi/prime/config.txt

@@ -1,3 +0,0 @@
-i2c0_enable=true
-i2c1_enable=false
-i2c2_enable=false

buildroot-external/board/orangepi/prime/meta

@@ -1,7 +0,0 @@
-BOARD_ID=opi-prime
-BOARD_NAME="Orange Pi Prime"
-CHASSIS=embedded
-BOOTLOADER=uboot
-KERNEL_FILE=Image
-BOOT_SYS=spl
-BOOT_ENV_SIZE=0x8000

buildroot-external/board/orangepi/prime/uboot-boot.ush

@@ -1,88 +0,0 @@
-
-part start mmc ${devnum} 6 mmc_env
-mmc dev ${devnum}
-setenv loadbootstate " \
-    echo 'loading env...'; \
-    mmc read ${ramdisk_addr_r} ${mmc_env} 0x40; \
-    env import -c ${ramdisk_addr_r} 0x8000;"
-
-setenv storebootstate " \
-    echo 'storing env...'; \
-    env export -c -s 0x8000 ${ramdisk_addr_r} BOOT_ORDER BOOT_A_LEFT BOOT_B_LEFT; \
-    mmc write ${ramdisk_addr_r} ${mmc_env} 0x40;"
-
-run loadbootstate
-test -n "${BOOT_ORDER}" || setenv BOOT_ORDER "A B"
-test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3
-test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3
-
-# HassOS bootargs
-setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor cgroup_enable=memory rootwait"
-
-# HassOS system A/B
-setenv bootargs_a "root=PARTUUID=8d3d53e3-6d49-4c38-8349-aff6859e82fd rootfstype=squashfs ro"
-setenv bootargs_b "root=PARTUUID=a3ec664e-32ce-4665-95ea-7ae90ce9aa20 rootfstype=squashfs ro"
-
-# Load extraargs
-fileenv mmc ${devnum}:1 ${ramdisk_addr_r} cmdline.txt cmdline
-
-# Load device tree
-fatload mmc ${devnum}:1 ${fdt_addr_r} sun50i-h5-orangepi-prime.dtb
-fdt addr ${fdt_addr_r}
-
-if load mmc ${devnum}:1 ${ramdisk_addr_r} config.txt; then
-  env import -t ${ramdisk_addr_r} ${filesize};
-fi
-
-if test "${i2c0_enable}" != "false"; then
-  fdt set /soc/i2c@1c2ac00 status "okay"
-fi
-
-if test "${i2c1_enable}" != "false"; then
-  fdt set /soc/i2c@1c2b000 status "okay"
-fi
-
-if test "${i2c2_enable}" != "false"; then
-  fdt set /soc/i2c@1c2b400 status "okay"
-fi
-
-setenv bootargs
-for BOOT_SLOT in "${BOOT_ORDER}"; do
-  if test "x${bootargs}" != "x"; then
-    # skip remaining slots
-  elif test "x${BOOT_SLOT}" = "xA"; then
-    if test ${BOOT_A_LEFT} -gt 0; then
-      setexpr BOOT_A_LEFT ${BOOT_A_LEFT} - 1
-      echo "Found valid slot A, ${BOOT_A_LEFT} attempts remaining"
-      setenv load_kernel "ext4load mmc ${devnum}:2 ${kernel_addr_r} Image"
-      setenv bootargs "${bootargs_hassos} ${bootargs_a} rauc.slot=A ${cmdline}"
-    fi
-  elif test "x${BOOT_SLOT}" = "xB"; then
-    if test ${BOOT_B_LEFT} -gt 0; then
-      setexpr BOOT_B_LEFT ${BOOT_B_LEFT} - 1
-      echo "Found valid slot B, ${BOOT_B_LEFT} attempts remaining"
-      setenv load_kernel "ext4load mmc ${devnum}:4 ${kernel_addr_r} Image"
-      setenv bootargs "${bootargs_hassos} ${bootargs_b} rauc.slot=B ${cmdline}"
-    fi
-  fi
-done
-
-if test -n "${bootargs}"; then
-  run storebootstate
-else
-  echo "No valid slot found, resetting tries to 3"
-  setenv BOOT_A_LEFT 3
-  setenv BOOT_B_LEFT 3
-  run storebootstate
-  reset
-fi
-
-echo "Loading kernel"
-run load_kernel
-echo " Starting kernel"
-printenv load_kernel
-printenv bootargs
-booti ${kernel_addr_r} - ${fdt_addr_r}
-
-echo "Fails on boot"
-reset

buildroot-external/board/orangepi/prime/uboot.config

@@ -1,8 +0,0 @@
-# CONFIG_USB_STORAGE is not set
-# CONFIG_DOS_PARTITIONcs not set
-CONFIG_EFI_PARTITION is not set
-CONFIG_USB=y
-CONFIG_CMD_USB=y
-CONFIG_DM_USB=y
-CONFIG_CMD_FILEENV=y
-CONFIG_ENV_IS_NOWHERE=Y