Update buildroot 2020.02.01 (#622)
* Update buildroot 2020.02.01 Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch> * Fix LN * Fix wpa Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch> * Fix lint Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch> * fix-network Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch> * Fix script Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch>
This commit is contained in:
Pascal Vizeli
155
buildroot/board/csky/gx6605s/gx6605s.dts
Normal file
155
buildroot/board/csky/gx6605s/gx6605s.dts
Normal file
@@ -0,0 +1,155 @@
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
model = "C-SKY gx6605s";
|
||||
compatible = "csky,gx6605s";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x10000000 0x04000000>;
|
||||
};
|
||||
|
||||
soc {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "simple-bus";
|
||||
ranges;
|
||||
|
||||
dummy_apb: apb-clock {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <27000000>;
|
||||
clock-output-names = "dummy_apb";
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
intc: interrupt-controller@500000 {
|
||||
compatible = "csky,gx6605s-intc";
|
||||
reg = <0x00500000 0x400>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
};
|
||||
|
||||
timer@20a000 {
|
||||
compatible = "csky,gx6605s-timer";
|
||||
reg = <0x0020a000 0x400>;
|
||||
clocks = <&dummy_apb>;
|
||||
interrupts = <10>;
|
||||
interrupt-parent = <&intc>;
|
||||
};
|
||||
|
||||
ehci-hcd@900000 {
|
||||
compatible = "generic-ehci";
|
||||
reg = <0x00900000 0x400>;
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <59>;
|
||||
};
|
||||
|
||||
ohci-hcd0@a00000 {
|
||||
compatible = "generic-ohci";
|
||||
reg = <0x00a00000 0x400>;
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <58>;
|
||||
};
|
||||
|
||||
ohci-hcd1@b00000 {
|
||||
compatible = "generic-ohci";
|
||||
reg = <0x00b00000 0x400>;
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <57>;
|
||||
};
|
||||
|
||||
serial@403000 {
|
||||
compatible = "ns16550a";
|
||||
reg = <0x00403000 0x400>;
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <15>;
|
||||
clock-frequency = <29491200>;
|
||||
baud = <115200>;
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <1>;
|
||||
};
|
||||
|
||||
gpio0: gpio@305000 {
|
||||
compatible = "wd,mbl-gpio";
|
||||
reg-names = "dirout", "dat", "set", "clr";
|
||||
reg = <0x305000 4>, <0x305004 4>, <0x305008 4>, <0x30500c 4>;
|
||||
bgpio-base = <0>;
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
};
|
||||
|
||||
gpio_buttons {
|
||||
compatible = "gpio-keys-polled";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
poll-interval = <100>;
|
||||
autorepeat;
|
||||
|
||||
button0 {
|
||||
label = "button8";
|
||||
linux,code = <KEY_LEFT>;
|
||||
gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
button1 {
|
||||
label = "button6";
|
||||
linux,code = <KEY_RIGHT>;
|
||||
gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
button2 {
|
||||
label = "button5";
|
||||
linux,code = <KEY_UP>;
|
||||
gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
button3 {
|
||||
label = "button9";
|
||||
linux,code = <KEY_DOWN>;
|
||||
gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
button4 {
|
||||
label = "button7";
|
||||
linux,code = <KEY_ENTER>;
|
||||
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio_leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led0 {
|
||||
label = "led10";
|
||||
gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
|
||||
led1 {
|
||||
label = "led11";
|
||||
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "timer";
|
||||
};
|
||||
|
||||
led2 {
|
||||
label = "led12";
|
||||
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-on";
|
||||
};
|
||||
|
||||
led3 {
|
||||
label = "led13";
|
||||
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-on";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200 init=/sbin/init root=/dev/sda2 rw rootwait";
|
||||
};
|
||||
};
|
||||
@@ -1,25 +0,0 @@
|
||||
From 7e3f2c482bc16537a093e87a27f0d465804a88e4 Mon Sep 17 00:00:00 2001
|
||||
From: Julien Olivain <juju@cotds.org>
|
||||
Date: Tue, 11 Dec 2018 23:04:46 +0100
|
||||
Subject: [PATCH] csky: update cmdline for serial console and rootfs on sda1
|
||||
|
||||
Signed-off-by: Julien Olivain <juju@cotds.org>
|
||||
---
|
||||
arch/csky/boot/dts/gx6605s.dts | 2 +-
|
||||
1 file changed, 1 insertion(+), 1 deletion(-)
|
||||
|
||||
diff --git a/arch/csky/boot/dts/gx6605s.dts b/arch/csky/boot/dts/gx6605s.dts
|
||||
index ce56106af967..f5d60b21e6f9 100644
|
||||
--- a/arch/csky/boot/dts/gx6605s.dts
|
||||
+++ b/arch/csky/boot/dts/gx6605s.dts
|
||||
@@ -155,6 +155,6 @@
|
||||
};
|
||||
|
||||
chosen {
|
||||
- bootargs = "console=tty0 init=/sbin/init root=/dev/sda2 rw rootwait";
|
||||
+ bootargs = "console=ttyS0,115200 init=/sbin/init root=/dev/sda1 rw rootwait";
|
||||
};
|
||||
};
|
||||
--
|
||||
2.19.2
|
||||
|
||||
@@ -41,9 +41,9 @@ Result of the build
|
||||
After building, you should obtain this tree:
|
||||
|
||||
output/images/
|
||||
├── vmlinux
|
||||
├── rootfs.ext2
|
||||
└── <board name>.dtb
|
||||
+-- vmlinux
|
||||
+-- rootfs.ext2
|
||||
+-- <board name>.dtb
|
||||
|
||||
How to run it
|
||||
=============
|
||||
|
||||
Reference in New Issue
Block a user