odroid-c2: Initial Support

Working: * Ethernet * Resize of Data * RAUC boot marking/fetching * CMD Line into HASSOS and Linux Partially working: * USB (requires 1+ devices in at boot. Seems to be a kernel/dt issue.) Untested: * RAUC Update * HDMI Not working: * Homeassistant ** We see: hassio > ha info The HTTP request failed with the error: Get http://hassio/homeassistant/info: dial tcp 172.30.32.2:80: getsockopt: connection refused
2018-08-08 23:36:33 -06:00
parent 5c8f8bea48
commit 11088580c5
36 changed files with 10629 additions and 22 deletions
--- a/buildroot-external/board/odroidc2/info
+++ b/buildroot-external/board/odroidc2/info
@@ -0,0 +1,13 @@
+BOARD_ID=odroidc2
+BOARD_NAME="Hardkernel Odroid-C2"
+CHASSIS=embedded
+BOOTLOADER=uboot
+KERNEL_FILE=Image
+BOOT_ENV=/mnt/boot/uboot.env
+BOOT_ENV_OFF=0x0000
+BOOT_ENV_SIZE=0x2000
+PART_BOOT=/dev/disk/by-partuuid/0d3e0000-01
+PART_KERNEL_0=/dev/disk/by-partuuid/0d3e0000-05
+PART_KERNEL_1=/dev/disk/by-partuuid/0d3e0000-07
+PART_SYSTEM_0=/dev/disk/by-partuuid/0d3e0000-06
+PART_SYSTEM_1=/dev/disk/by-partuuid/0d3e0000-08
--- a/buildroot-external/board/odroidc2/kernel.config
+++ b/buildroot-external/board/odroidc2/kernel.config
--- a/buildroot-external/board/odroidc2/post-image.sh
+++ b/buildroot-external/board/odroidc2/post-image.sh
@@ -0,0 +1,53 @@
+#!/bin/bash
+set -e
+
+SCRIPT_DIR=${BR2_EXTERNAL_HASSOS_PATH}/scripts
+BOARD_DIR="$(dirname $0)"
+BOOT_DATA=${BINARIES_DIR}/boot
+
+. ${SCRIPT_DIR}/hdd-image.sh
+. ${SCRIPT_DIR}/name.sh
+. ${SCRIPT_DIR}/ota.sh
+. ${BR2_EXTERNAL_HASSOS_PATH}/info
+. ${BOARD_DIR}/info
+
+# Init boot data
+rm -rf ${BOOT_DATA}
+mkdir -p ${BOOT_DATA}
+
+cp ${BINARIES_DIR}/boot.scr ${BOOT_DATA}/boot.scr
+cp ${BINARIES_DIR}/meson-gxbb-odroidc2.dtb ${BOOT_DATA}/meson-gxbb-odroidc2.dtb
+
+# Update Boot options
+(
+    echo -n -e "\x41\xD9\x12\xFF"
+    echo -n -e "\x00\x00"
+) > ${BOOT_DATA}/uboot.env
+
+# Update Boot options
+(
+    echo "kernel=u-boot.bin"
+    echo "disable_splash=1"
+    echo "dtparam=audio=on"
+    echo "arm_64bit=1"
+) > ${BOOT_DATA}/config.txt
+
+echo "console=ttyS0,115200n8 console=tty0" > ${BOOT_DATA}/cmdline.txt
+
+function make_bootable() {
+    local BL1="${BINARIES_DIR}/bl1.bin.hardkernel"
+    local UBOOT_GXBB="${BINARIES_DIR}/u-boot.gxbb"
+    local hdd_img="$(hassos_image_name img)"
+
+    dd if=${BL1} of=${hdd_img} conv=notrunc bs=1 count=442
+    dd if=${BL1} of=${hdd_img} conv=notrunc bs=512 skip=1 seek=1
+    dd if=${UBOOT_GXBB} of=${hdd_img} conv=notrunc bs=512 seek=97
+}
+
+# Create other layers
+prepare_disk_image
+
+create_disk_mbr 2
+make_bootable
+convert_disk_image_gz
+create_ota_update
--- a/buildroot-external/board/odroidc2/uboot-boot.sh
+++ b/buildroot-external/board/odroidc2/uboot-boot.sh
@@ -0,0 +1,227 @@
+###################################################
+# Changes made to this are overwritten every time there's a new upgrade
+# To make your changes permanent change it on
+# boot.ini.default
+# After changing it on boot.ini.default run the bootini command to
+# rewrite this file with your personal permanent settings.
+# Documentation: http://odroid.com/dokuwiki/doku.php?id=en:c2_persistent_bootini
+########################################################################
+
+# Possible screen resolutions
+# Uncomment only a single Line! The line with setenv written.
+# At least one mode must be selected.
+
+# Custom modeline!
+# To use custom modeline you need to disable all the below resolutions
+# and setup your own!
+# For more information check our wiki:
+# http://odroid.com/dokuwiki/doku.php?id=en:c2_hdmi_autosetting
+# Example below:
+# setenv m "custombuilt"
+# setenv modeline "1920,1200,154000,74040,60,1920,1968,2000,2080,1200,1202,1208,1235,1,0,1"
+
+# 480 Lines (720x480)
+# setenv m "480i60hz" # Interlaced 60Hz
+# setenv m "480i_rpt" # Interlaced for Rear Projection Televisions 60Hz
+# setenv m "480p60hz" # 480 Progressive 60Hz
+# setenv m "480p_rpt" # 480 Progressive for Rear Projection Televisions 60Hz
+
+# 576 Lines (720x576)
+# setenv m "576i50hz" # Interlaced 50Hz
+# setenv m "576i_rpt" # Interlaced for Rear Projection Televisions 50Hz
+# setenv m "576p50hz" # Progressive 50Hz
+# setenv m "576p_rpt" # Progressive for Rear Projection Televisions 50Hz
+
+# 720 Lines (1280x720)
+# setenv m "720p50hz" # 50Hz
+# setenv m "720p60hz" # 60Hz
+
+# 1080 Lines (1920x1080)
+# setenv m "1080i60hz" # Interlaced 60Hz
+setenv m "1080p60hz" # Progressive 60Hz
+# setenv m "1080i50hz" # Interlaced 50Hz
+# setenv m "1080p50hz" # Progressive 50Hz
+# setenv m "1080p24hz" # Progressive 24Hz
+
+# 4K (3840x2160)
+# setenv m "2160p30hz"    # Progressive 30Hz
+# setenv m "2160p25hz"    # Progressive 25Hz
+# setenv m "2160p24hz"    # Progressive 24Hz
+# setenv m "smpte24hz"    # Progressive 24Hz SMPTE
+# setenv m "2160p50hz"    # Progressive 50Hz
+# setenv m "2160p60hz"    # Progressive 60Hz
+# setenv m "2160p50hz420" # Progressive 50Hz with YCbCr 4:2:0 (Requires TV/Monitor that supports it)
+# setenv m "2160p60hz420" # Progressive 60Hz with YCbCr 4:2:0 (Requires TV/Monitor that supports it)
+
+### VESA modes ###
+# setenv m "640x480p60hz"
+# setenv m "800x480p60hz"
+# setenv m "480x800p60hz"
+# setenv m "800x600p60hz"
+# setenv m "1024x600p60hz"
+# setenv m "1024x768p60hz"
+# setenv m "1280x800p60hz"
+# setenv m "1280x1024p60hz"
+# setenv m "1360x768p60hz"
+# setenv m "1440x900p60hz"
+# setenv m "1600x900p60hz"
+# setenv m "1680x1050p60hz"
+# setenv m "1600x1200p60hz"
+# setenv m "1920x1200p60hz"
+# setenv m "2560x1080p60hz"
+# setenv m "2560x1440p60hz"
+# setenv m "2560x1600p60hz"
+# setenv m "3440x1440p60hz"
+
+# HDMI BPP Mode
+setenv m_bpp "32"
+# setenv m_bpp "24"
+# setenv m_bpp "16"
+
+# HDMI DVI/VGA modes
+# By default its set to HDMI, if needed change below.
+# Uncomment only a single Line.
+# setenv vout "dvi"
+# setenv vout "vga"
+
+# HDMI HotPlug Detection control
+# Allows you to force HDMI thinking that the cable is connected.
+# true = HDMI will believe that cable is always connected
+# false = will let board/monitor negotiate the connection status
+setenv hpd "true"
+# setenv hpd "false"
+
+# Monitor output
+# Controls if HDMI PHY should output anything to the monitor
+#setenv monitor_onoff "false" # true or false
+
+# Server Mode (aka. No Graphics)
+# Setting nographics to 1 will disable all video subsystem
+# This mode is ideal of server type usage. (Saves ~300Mb of RAM)
+setenv nographics "0"
+
+# Meson Timer
+# 1 - Meson Timer
+# 0 - Arch Timer
+# Using meson_timer improves the video playback however it breaks KVM (virtualization).
+# Using arch timer allows KVM/Virtualization to work however you'll experience poor video
+#setenv mesontimer "1"
+
+# UHS (Ultra High Speed) MicroSD mode enable/disable
+#setenv disableuhs "false"
+
+# MicroSD Card Detection enable/disable
+# Force the MMC controlled to believe that a card is connected.
+#setenv mmc_removable "true"
+
+# USB Multi WebCam tweak
+# Only enable this if you use it.
+#setenv usbmulticam "false"
+
+# Default Console Device Setting
+#setenv condev "console=ttyS0,115200n8 console=tty0"   # on both
+
+# CPU Frequency / Cores control
+###########################################
+### WARNING!!! WARNING!!! WARNING!!!
+# Before changing anything here please read the wiki entry:
+# http://odroid.com/dokuwiki/doku.php?id=en:c2_set_cpu_freq
+#
+# MAX CPU's
+# setenv maxcpus "1"
+# setenv maxcpus "2"
+# setenv maxcpus "3"
+setenv maxcpus "4"
+
+# MAX Frequency
+# setenv max_freq "2016"  # 2.016GHz
+# setenv max_freq "1944"  # 1.944GHz
+# setenv max_freq "1944"  # 1.944GHz
+# setenv max_freq "1920"  # 1.920GHz
+# setenv max_freq "1896"  # 1.896GHz
+# setenv max_freq "1752"  # 1.752GHz
+# setenv max_freq "1680"  # 1.680GHz
+# setenv max_freq "1656"  # 1.656GHz
+setenv max_freq "1536"  # 1.536GHz
+
+
+
+###########################################
+
+
+test -n "${BOOT_ORDER}" || setenv BOOT_ORDER "A B"
+test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3
+test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3
+
+# HassOS bootargs
+setenv bootargs_hassos "no_console_suspend hdmimode=${m} m_bpp=${m_bpp} net.ifnames=0 elevator=noop disablehpd=${hpd} max_freq=${max_freq} maxcpus=${maxcpus} zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor cgroup_enable=memory"
+
+# HassOS system A/B
+#setenv bootargs_a "root=PARTUUID=0d3e0000-06 rootfstype=squashfs ro"
+#setenv bootargs_b "root=PARTUUID=0d3e0000-08 rootfstype=squashfs ro"
+
+#setenv bootargs_a "root=/dev/mmcblk1p6 rootfstype=squashfs ro rootwait"
+#setenv bootargs_b "root=/dev/mmcblk1p8 rootfstype=squashfs ro rootwait"
+
+setenv bootargs_a "root=PARTUUID=0d3e0000-06 rootfstype=squashfs ro rootwait"
+setenv bootargs_b "root=PARTUUID=0d3e0000-08 rootfstype=squashfs ro rootwait"
+
+# Preserve origin bootargs
+setenv bootargs_odroidc2
+setenv fdt_org "0x1000000"
+# Load extraargs
+fileenv mmc 0:1 ${fdt_org} cmdline.txt cmdline
+fatload mmc 0:1 ${fdt_org} meson-gxbb-odroidc2.dtb
+fdt addr ${fdt_org}
+#fdt get value bootargs_odroidc2 /chosen bootargs
+
+
+# logical volumes get numbered after physical ones.
+# 1. boot
+# 2. Extended partition
+# 3. Overlay
+# 4. Data
+# 5. KernelA
+# 6. SystemA
+# 7. KernelB
+# 8. SystemB
+# 9. BootInfo
+setenv bootargs
+for BOOT_SLOT in "${BOOT_ORDER}"; do
+  if test "x${bootargs}" != "x"; then
+    # skip remaining slots
+  elif test "x${BOOT_SLOT}" = "xA"; then
+    if test ${BOOT_A_LEFT} -gt 0; then
+      setexpr BOOT_A_LEFT ${BOOT_A_LEFT} - 1
+      echo "Found valid slot A, ${BOOT_A_LEFT} attempts remaining"
+      setenv load_kernel "ext4load mmc 0:5 ${kernel_addr_r} Image"
+      setenv bootargs "${bootargs_hassos} ${bootargs_a} rauc.slot=A ${cmdline}"
+    fi
+  elif test "x${BOOT_SLOT}" = "xB"; then
+    if test ${BOOT_B_LEFT} -gt 0; then
+      setexpr BOOT_B_LEFT ${BOOT_B_LEFT} - 1
+      echo "Found valid slot B, ${BOOT_B_LEFT} attempts remaining"
+      setenv load_kernel "ext4load mmc 0:7 ${kernel_addr_r} Image"
+      setenv bootargs "${bootargs_hassos} ${bootargs_b} rauc.slot=B ${cmdline}"
+    fi
+  fi
+done
+
+setenv fdt_addr
+if test -n "${bootargs}"; then
+  saveenv
+else
+  echo "No valid slot found, resetting tries to 3"
+  setenv BOOT_A_LEFT 3
+  setenv BOOT_B_LEFT 3
+  saveenv
+  reset
+fi
+
+echo "Loading kernel"
+run load_kernel
+echo " Starting kernel"
+booti ${kernel_addr_r} - ${fdt_org}
+
+echo "Fails on boot"
+reset
--- a/buildroot-external/board/odroidc2/uboot.config
+++ b/buildroot-external/board/odroidc2/uboot.config
@@ -0,0 +1,17 @@
+# CONFIG_USB_STORAGE is not set
+CONFIG_ENV_IS_IN_FAT=y
+CONFIG_ENV_FAT_INTERFACE="mmc"
+CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
+CONFIG_ENV_FAT_FILE="uboot.env"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_DISTRO_DEFAULTS=y
+# CONFIG_EXPERT is not set
+# CONFIG_DISPLAY_CPUINFO is not set
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_SYS_PROMPT="HassOS> "
+CONFIG_DOS_PARTITION=y
+# CONFIG_ISO_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+CONFIG_FS_EXT4=y
+CONFIG_CONSOLE_SCROLL_LINES=10
+CONFIG_CMD_SETEXPR=y