Bump to U-Boot 2021.10-rc5 (#1556)
The bump to U-Boot 2021.10-rc5 also makes quite some patches obsolete since they are already part of U-Boot. This also removes a patch which disables framebuffer support on Raspberry Pi: Framebuffer support seems to work fine in todays U-Boot/Linux combination. It can help debug boot problems on Raspberry Pi devices. Without the patch framebuffer support will be enabled by default.
This commit is contained in:
@@ -1,5 +1,5 @@
|
||||
From 983121a741192153492a61befc0e0fc61b9f8b14 Mon Sep 17 00:00:00 2001
|
||||
Message-Id: <983121a741192153492a61befc0e0fc61b9f8b14.1617731428.git.stefan@agner.ch>
|
||||
From e18419a214ba872d14462354886148f976312e3c Mon Sep 17 00:00:00 2001
|
||||
Message-Id: <e18419a214ba872d14462354886148f976312e3c.1632758899.git.stefan@agner.ch>
|
||||
From: Pascal Vizeli <pvizeli@syshack.ch>
|
||||
Date: Fri, 24 Apr 2020 12:41:50 +0000
|
||||
Subject: [PATCH 1/2] SPL: modify load address of U-Boot
|
||||
@@ -15,7 +15,7 @@ Signed-off-by: Stefan Agner <stefan@agner.ch>
|
||||
2 files changed, 2 insertions(+)
|
||||
|
||||
diff --git a/configs/tinker-rk3288_defconfig b/configs/tinker-rk3288_defconfig
|
||||
index 8686a66d13..c3363821dd 100644
|
||||
index 3ac314ab89..67ca98c383 100644
|
||||
--- a/configs/tinker-rk3288_defconfig
|
||||
+++ b/configs/tinker-rk3288_defconfig
|
||||
@@ -88,3 +88,4 @@ CONFIG_VIDEO_ROCKCHIP=y
|
||||
@@ -24,7 +24,7 @@ index 8686a66d13..c3363821dd 100644
|
||||
CONFIG_ERRNO_STR=y
|
||||
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x2000
|
||||
diff --git a/configs/tinker-s-rk3288_defconfig b/configs/tinker-s-rk3288_defconfig
|
||||
index 22714833cc..f5dd23577c 100644
|
||||
index 35e84b7088..93cfe4f094 100644
|
||||
--- a/configs/tinker-s-rk3288_defconfig
|
||||
+++ b/configs/tinker-s-rk3288_defconfig
|
||||
@@ -90,3 +90,4 @@ CONFIG_DISPLAY_ROCKCHIP_HDMI=y
|
||||
@@ -33,5 +33,5 @@ index 22714833cc..f5dd23577c 100644
|
||||
CONFIG_ERRNO_STR=y
|
||||
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x2000
|
||||
--
|
||||
2.31.1
|
||||
2.33.0
|
||||
|
||||
|
||||
@@ -1,7 +1,7 @@
|
||||
From f9195bc5cb18f71117f6efc1c352209e62c53706 Mon Sep 17 00:00:00 2001
|
||||
Message-Id: <f9195bc5cb18f71117f6efc1c352209e62c53706.1617731428.git.stefan@agner.ch>
|
||||
In-Reply-To: <983121a741192153492a61befc0e0fc61b9f8b14.1617731428.git.stefan@agner.ch>
|
||||
References: <983121a741192153492a61befc0e0fc61b9f8b14.1617731428.git.stefan@agner.ch>
|
||||
From 4c09e7741c219ef28be912e97a986b6402290c9b Mon Sep 17 00:00:00 2001
|
||||
Message-Id: <4c09e7741c219ef28be912e97a986b6402290c9b.1632758899.git.stefan@agner.ch>
|
||||
In-Reply-To: <e18419a214ba872d14462354886148f976312e3c.1632758899.git.stefan@agner.ch>
|
||||
References: <e18419a214ba872d14462354886148f976312e3c.1632758899.git.stefan@agner.ch>
|
||||
From: Pascal Vizeli <pvizeli@syshack.ch>
|
||||
Date: Fri, 24 Apr 2020 11:37:55 +0000
|
||||
Subject: [PATCH 2/2] pmic: enable LDO2 vcc33_mipi at bootup
|
||||
@@ -64,5 +64,5 @@ index f85209c649..6fa1bb0c66 100644
|
||||
+}
|
||||
+#endif
|
||||
--
|
||||
2.31.1
|
||||
2.33.0
|
||||
|
||||
|
||||
Reference in New Issue
Block a user